A nanofiber-based drug depot with high drug loading for sustained release

Accelerating healing of infected wounds with G. glabra extract and curcumin Co-loaded electrospun nanofibrous dressing

This study aimed to construct a nanofibrous wound dressing composed of polyvinyl alcohol (PVA) and chitosan (CS) containing curcumin and Glycyrrhiza glabra root extract to inhibit infection and accelerate wound healing. Loading 10 wt% of G. glabra extract-curcumin (50:50) by electrospinng technique resulted in the formation of nanofibers (NFs) with diameter distribution 303 ± 38 and had a uniform and defect-free morphology. FTIR analysis confirmed the loading of the components without adverse interactions. Also, the results showed extremely high porosity, extraordinary liquid absorption capacity, and complete wettability. In addition, G. glabra extract-curcumin showed significant antioxidant activity and their release profile from NFs was continuous and sustained. Also, the prepared NF could inhibit the growth of both Gram-positive Saureus and Gram-negative E. coli strains. Wound healing evaluation in the infected animal model showed that the NFs caused full wound closure and accelerated skin regeneration. The studies on inhibiting the bacteria growth at the wound site also revealed complete inhibitory effects. Moreover, histopathology studies confirmed the complete regeneration of skin layers, formation of collagen fibers, and angiogenesis. Finally, PVA/CS NFs containing G. glabra extract-curcumin as a multifunctional bioactive wound dressing presented a promising approach for promoting the healing of infected wounds.

A PLGA/Silk Fibroin Nanofibre Membrane Loaded with Natural Flavonoid Compounds Extracted from Green Cocoons for Wound Healing

The use of biodegradable materials combined with natural metabolites in wound dressings has received much attention. Flavonoids (FLs) from green cocoons, as metabolites, have antibacterial, antioxidant, anti-inflammatory, and other pharmacological effects. In this study, composite membranes of FL-loaded polylactic glycolic acid (PLGA)/silk fibroin (SF) were prepared by an electrospinning method. The prepared membranes, including SF, exhibited a good slow-release effect and cytocompatibility. An in vitro evaluation of the FL-loaded PLGA/SF membranes demonstrated good antioxidant, antibacterial, and anti-inflammatory properties. Animal experiments showed that the wound healing rate of PLGA/SF-2.5FL membranes within 15 days was 97.3%, and that of the control group was 72.5%. The PLGA/SF-2.5FL membranes shortened the inflammatory period of a full-layer wound model and promoted skin regeneration and wound healing by downregulating expression of the pro-inflammatory cytokines IL-1β and TNF-α and promoting expression of the growth factors VEGF, TGF-β, and EGF. In summary, the PLGA/SF-2.5FL composite nanofibre membrane with anti-inflammatory properties is an ideal wound dressing to promote acute wound healing.

Electrospun multi-chamber core-shell nanofibers and their controlled release behaviors: A review

Core-shell structure is a concentric circle structure found in nature. The rapid development of electrospinning technology provides more approaches for the production of core-shell nanofibers. The nanoscale effects and expansive specific surface area of core-shell nanofibers can facilitate the dissolution of drugs. By employing ingenious structural designs and judicious polymer selection, specialized nanofiber drug delivery systems can be prepared to achieve controlled drug release. The synergistic combination of core-shell structure and materials exhibits a strong strategy for enhancing the drug utilization efficiency and customizing the release profile of drugs. Consequently, multi-chamber core-shell nanofibers hold great promise for highly efficient disease treatment. However, little attention concentration is focused on the effect of multi-chamber core-shell nanofibers on controlled release of drugs. In this review, we introduced different fabrication techniques for multi-chamber core-shell nanostructures, including advanced electrospinning technologies and surface functionalization. Subsequently, we reviewed the different controlled drug release behaviors of multi-chamber core-shell nanofibers and their potential needs for disease treatment. The comprehensive elucidation of controlled release behaviors based on electrospun multi-chamber core-shell nanostructures could inspire the exploration of novel controlled delivery systems. Furthermore, once these fibers with customizable drug release profiles move toward industrial mass production, they will potentially promote the development of pharmacy and the treatment of various diseases. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Exploring Electrospun Scaffold Innovations in Cardiovascular Therapy: A Review of Electrospinning in Cardiovascular Disease

Cardiovascular disease (CVD) remains the leading cause of mortality worldwide. In particular, patients who suffer from ischemic heart disease (IHD) that is not amenable to surgical or percutaneous revascularization techniques have limited treatment options. Furthermore, after revascularization is successfully implemented, there are a number of pathophysiological changes to the myocardium, including but not limited to ischemia-reperfusion injury, necrosis, altered inflammation, tissue remodeling, and dyskinetic wall motion. Electrospinning, a nanofiber scaffold fabrication technique, has recently emerged as an attractive option as a potential therapeutic platform for the treatment of cardiovascular disease. Electrospun scaffolds made of biocompatible materials have the ability to mimic the native extracellular matrix and are compatible with drug delivery. These inherent properties, combined with ease of customization and a low cost of production, have made electrospun scaffolds an active area of research for the treatment of cardiovascular disease. In this review, we aim to discuss the current state of electrospinning from the fundamentals of scaffold creation to the current role of electrospun materials as both bioengineered extracellular matrices and drug delivery vehicles in the treatment of CVD, with a special emphasis on the potential clinical applications in myocardial ischemia.

Zingiber officinale and thymus vulgaris extracts co-loaded polyvinyl alcohol and chitosan electrospun nanofibers for tackling infection and wound healing promotion

Infections are severe complications associated with chronic wounds and tardy healing that should be timely treated to achieve rapid and proper tissue repair. To hinder such difficulties, a nanofibrous mat composed of polyvinyl alcohol and chitosan (PVA/CS) was developed by electrospinning method, containing thyme (Thymus vulgaris) and ginger (Zingiber officinale) extracts. The mat containing 10 wt% of the extracts (at the ratio of 50:50) exposed the nanofibers (NFs) with the nanoscale diameter (average 382 ± 60 nm), smooth surface, and defect-free morphology. Likewise, the relevant analyses of the loaded mat displayed high wettability, porosity, and liquid absorption capacity without any adverse interaction. The obtained mat also provided a high antioxidant activity, and its release profile was continuous and sustained for nearly 72 h. Besides, it inhibited the growth of both Gram-positive S. aureus and Gram-negative E. coli strains. Furthermore, the proposed mat significantly accelerated cutaneous wound healing in bacterial-infected rats by preventing bacteria growth at the wound site. At last, histopathology analysis confirmed the ample regeneration of skin structures, forming collagen fibers and appendages. Overall, the proposed mat containing ginger-thyme extracts provides multiple therapeutic capabilities with promising solutions for inhibiting wound infection and accelerating the healing process.

Preparation of polycaprolactone and polymethacrylate nanofibers for controlled ocular delivery of ketorolac tromethamine: Pharmacokinetic study in Rabbit's Eye

Ophthalmitis is an inflammation of the eye triggered by various conditions including diseases, allergy, trauma, or surgery. Management of this condition usually includes administration of topical anti-inflammatory eye drops such as nonsteroidal anti-inflammatory drugs. To overcome the challenges of conventional eye drops such as frequent administration and low intraocular bioavailability, nanofibrous inserts of Ketorolac tromethamine (KET) were developed in this study. Polycaprolactone and polymethacrylate containing KET were electrospun to prepare biocompatible and biodegradable nanofibers. The inserts were studied for morphology, drug-polymer interaction, physicochemical properties, cell viability, in vitro drug release study and pharmacokinetic study in rabbit's eye. Uniform nanofibers with mean diameters < 350 nm were developed. Suitable mechanical properties with tensile strength up to 2.8 MPa indicated high strength and flexibility of inserts. Nanofibers exhibited controlled drug release for up to 140 h at a concentration more than 50 μg/ml in tears without causing any damage or irritation to the eye. Formulations indicated enhanced pharmacokinetics with 6- to 8-times higher Area Under the Curve (AUC0-144) compared to KET eye drop. Acceptable cell viability confirmed the safety of inserts. Due to the fact that this preservative-free polymer insert can obtain therapeutic concentration in the tear film without fluctuation, it can be a suitable alternative for the treatment of intraocular inflammations with less complications, easier use, and even higher intraocular penetration.

Nano-Micro Core-Shell Fibers for Efficient Pest Trapping

Insect sex pheromones as an alternative to chemical pesticides hold promising prospects in pest control. However, their burst release and duration need to be optimized. Herein, pheromone-loaded core-shell fibers composed of degradable polycaprolactone and polyhydroxybutyrate were prepared by coaxial electrospinning. The results showed that this core-shell fiber had good hydrophobic performance and thermal stability, and the light transmittance in the ultraviolet band was only below 40%, which provided protection to pheromones. The core-shell structure alleviated the burst release of pheromone in the fiber and extended the release time to about 133 days. In the field, the pheromone-loaded core-shell fibers showed the same continuous and efficient trapping of Spodoptera litura as the commercial carriers. More importantly, the electrospun fibers combined with biomaterials had a degradability unmatched by commercial carriers. The structure design strategy provides ideas for the innovative design of pheromone carriers and is a potential tool for the management of agricultural pests.

Attributes of Nanomaterials and Nanotopographies for Improved Bone Tissue Engineering and Regeneration

Bone tissue engineering (BTE) is a multidisciplinary area that can solve the limitation of conventional grafting methods by developing viable and biocompatible bone replacements. The three essential components of BTE, i.e., Scaffold material and Cells and Growth factors altogether, facilitate support and guide for bone formation, differentiation of the bone tissues, and enhancement in the cellular activities and bone regeneration. However, there is a scarcity of the appropriate materials that can match the mechanical property as well as functional similarity to native tissue, considering the bone as hard tissue. In such scenarios, nanotechnology can be leveraged upon to achieve the desired aspects of BTE, and that is the key point of this review article. This review article examines the significant areas of nanotechnology research that have an impact on regeneration of bone: (a) scaffold with nanomaterials helps to enhance physicochemical interactions, biocompatibility, mechanical stability, and attachment; (b) nanoparticle-based approaches for delivering bioactive chemicals, growth factors, and genetic material. The article begins with the introduction of components and healing mechanisms of bone and the factors associated with them. The focus of this article is on the various nanotopographies that are now being used in scaffold formation, by describing how they are made, and how these nanotopographies affect the immune system and potential underlying mechanisms. The advantages of 4D bioprinting in BTE by using nanoink have also been mentioned. Additionally, we have investigated the importance of an in silico approach for finding the interaction between drugs and their related receptors, which can help to formulate suitable systems for delivery. This review emphasizes the role of nanoscale approach and how it helps to increase the efficacy of parameters of scaffold as well as drug delivery system for tissue engineering and bone regeneration.

Propolis-loaded nanofiber scaffolds based on polyvinyl alcohol and polycaprolactone

Propolis-loaded electrospun nanofibers (PENs) have been regarded as promising candidates for biomedical purposes such as wound healing/dressing owing to their outstanding pharmacological and biological properties. This paper focuses on the development of electrospun nanofibers with optimum levels of propolis (PRP) and two polymer types (polycaprolactone (PCL) and polyvinyl alcohol (PVA)). Hence, response surface methodology (RSM) was employed to investigate the variation of the scaffold characteristics including porosity, average diameter, wettability, release, and tensile strength. For each response, a second-order polynomial model with a high coefficient of determination (R²) values ranging from 0.95 to 0.989 was developed using multiple linear regression analysis. The overall optimum region with the best characteristics was found to be at PCL/6% PRP and PVA/5% PRP. After selecting the optimal samples, the cytotoxicity assay showed no toxicity for the optimal concentrations of PRP. Furthermore, Fourier transform infrared (FTIR) spectra revealed that no new chemical functional groups were introduced in the PENs. Uniform fibers were found in the optimum samples without the appearance of a bead-like structure in the fibers. In conclusion, nanofibers containing the optimal concentration of PRP with suitable properties can be used in biomedical and tissue engineering.

In Situ Constructed Nano-Drug Depots through Intracellular Hydrolytic Condensation for Chemotherapy of Bladder Cancer

Intravesical administration of first-line drugs has shown failure in the treatment of bladder cancer owing to the poor tumor retention time of chemotherapeutics. Herein, we report an intracellular hydrolytic condensation (IHC) system to construct long-term retentive nano-drug depots in situ, wherein sustained drug release results in highly efficient suppression of bladder cancer. Briefly, the designed doxorubicin (Dox)-silane conjugates self-assemble into silane-based prodrug nanoparticles, which condense into silicon particle-based nano-drug depots inside tumor cells. Significantly, we demonstrate that the IHC system possesses highly potent antitumor efficacy, which leads to the regression and eradication of large established tumors and simultaneously extends the overall survival of air pouch bladder cancer mice compared with that of mice treated with Dox. The concept of intracellular hydrolytic condensation can be extended via conjugating other chemotherapeutic drugs, which may facilitate rational design of novel nanomedicines for augmentation of chemotherapy.

Electrospun Nanofiber Membranes for Air Filtration: A Review

Nanomaterials for air filtration have been studied by researchers for decades. Owing to the advantages of high porosity, small pore size, and good connectivity, nanofiber membranes prepared by electrospinning technology have been considered as an outstanding air-filter candidate. To satisfy the requirements of material functionalization, electrospinning can provide a simple and efficient one-step process to fabricate the complex structures of functional nanofibers such as core-sheath structures, Janus structures, and other multilayered structures. Additionally, as a nanoparticle carrier, electrospun nanofibers can easily achieve antibacterial properties, flame-retardant properties, and the adsorption properties of volatile gases, etc. These simple and effective approaches have benefited from the significate development of electrospun nanofibers for air-filtration applications. In this review, the research progress on electrospun nanofibers as air filters in recent years is summarized. The fabrication methods, filtration performances, advantages, and disadvantages of single-polymer nanofibers, multipolymer composite nanofibers, and nanoparticle-doped hybrid nanofibers are investigated. Finally, the basic principles of air filtration are concluded upon and prospects for the application of complex-structured nanofibers in the field of air filtration are proposed.

Recent Advances in Biological Activity, New Formulations and Prodrugs of Ferulic Acid

Trans-ferulic acid (FA) is a derivative of 4-hydroxycinnamic acid, which is found in many food products, fruits and beverages. It has scientifically proven antioxidant, anti-inflammatory and antibacterial properties. However, its low ability to permeate through biological barriers (e.g., the blood-brain barrier, BBB), its low bioavailability and its fast elimination from the gastrointestinal tract after oral administration limit its clinical use, e.g., for the treatment of neurodegenerative diseases, such as Alzheimer's disease. Therefore, new nanotechnological approaches are developed in order to regulate intracellular transport of ferulic acid. The objective of this review is to summarize the last decade's research on biological properties of ferulic acid and innovative ways of its delivery, supporting pharmacological therapy.

Biomaterial-based delivery of nucleic acids for tissue regeneration

Gene therapy is a promising novel method of tissue regeneration by stimulating or inhibiting key signaling pathways. However, their therapeutic applications in vivo are largely limited by several physiological obstacles, such as degradation of nucleases, impermeability of cell membranes, and transport to the desired intracellular compartments. Biomaterial-based gene delivery systems can overcome the problems of stability and local drug delivery, and can temporarily control the overexpression of therapeutic genes, leading to the local production of physiologically relevant levels of regulatory factors. But the gene delivery of biomaterials for tissue regeneration relies on multi-factor design. This review aims to outline the impact of gene delivery methods, therapeutic genes and biomaterials selection on this strategy, emphatically introduce the latest developments in the design of gene delivery vehicles based on biomaterials, summarize the mechanism of nucleic acid for tissue regeneration, and explore the strategies of nucleic acid delivery vehicles for various tissue regeneration.

Emerging 3D printing technologies for drug delivery devices: Current status and future perspective

The 'one-size-fits-all' approach followed by conventional drug delivery platforms often restricts its application in pharmaceutical industry, due to the incapability of adapting to individual pharmacokinetic traits. Driven by the development of additive manufacturing (AM) technology, three-dimensional (3D) printed drug delivery medical devices have gained increasing popularity, which offers key advantages over traditional drug delivery systems. The major benefits include the ability to fabricate 3D structures with customizable design and intricate architecture, and most importantly, ease of personalized medication. Furthermore, the emergence of multi-material printing and four-dimensional (4D) printing integrates the benefits of multiple functional materials, and thus provide widespread opportunities for the advancement of personalized drug delivery devices. Despite the remarkable progress made by AM techniques, concerns related to regulatory issues, scalability and cost-effectiveness remain major hurdles. Herein, we provide an overview on the latest accomplishments in 3D printed drug delivery devices as well as major challenges and future perspectives for AM enabled dosage forms and drug delivery systems.

Zeolite Composite Nanofiber Mesh for Indoxyl Sulfate Adsorption toward Wearable Blood Purification Devices

A nanofiber mesh was prepared for the adsorption of indoxyl sulfate (IS), a toxin associated with chronic kidney disease. Removing IS is highly demanded for efficient blood purification. The objective of this study is to develop a zeolite composite nanofiber mesh to remove IS efficiently. Eight zeolites with different properties were used for IS adsorption, where a zeolite with a pore size of 7 Å, H+ cations, and a silica to aluminum ratio of 240 mol/mol exhibited the highest adsorption capacity. This was primarily attributed to its suitable silica to aluminum ratio. The zeolites were incorporated in biocompatible poly (ethylene-co-vinyl alcohol) (EVOH) nanofibers, and a zeolite composite nanofiber mesh was successfully fabricated via electrospinning. The nanofiber mesh exhibited an IS adsorption capacity of 107 μg/g, while the adsorption capacity by zeolite increased from 208 μg/g in powder form to 386 μg/g when dispersed in the mesh. This also led to an increase in cell viability from 86% to 96%. These results demonstrated that this zeolite composite nanofiber mesh can be safely and effectively applied in wearable blood purification devices.

A novel synthetic approach to produce cellulose-based woven scaffolds impregnated with bioactive glass for bone regeneration

Tissue-engineering has become the best alternative solution for replacing the damaged tissues. However, the cost of scaffold materials is still a big challenge, so the development of cost-effective scaffolds is highly encouraged. In this research, different types of cotton textile-scaffolds as a cellulosic material were developed to be utilized as a substrate for cells proliferation. They were loaded with bioactive glass (BG) doped with silver nanoparticles (AgNPs). The effect of the loaded materials on the physicochemical and mechanical characteristics of the cellulosic textile scaffolds was investigated by means of FTIR, contact angle, physical and mechanical properties of the cotton fabrics, in addition to assessing their antimicrobial activity. Moreover, the biomineralization was evaluated after soaking in Simulated Body Fluid (SBF) using ICP and SEM accessorized with EDX. Cells proliferation capacities of the developed cellulosic woven-scaffolds were assessed against MG63 cell line at different incubation times. The physicochemical and mechanical features of these fabrics demonstrated a positive influence for the existence of BG impregnation, especially those doped with AgNPs. The antimicrobial features were also affirmed for the cellulosic scaffolds. More pronounced influence was observed on the biomineralization of the scaffold impregnated with BG doped with 0.5% Ag. The percentages of proliferated cells were very close to negative control (100% ± 10). This approach offers a novel and affordable alternative cellulosic woven-scaffolds for bone regeneration.

Electrospun collagen core/poly-l-lactic acid shell nanofibers for prolonged release of hydrophilic drug

The development of sustained control drug release for delivering hydrophilic drugs has been challenging due to a burst release. Nanofibers are used as materials that enable efficient drug delivery systems. In this study, we designed drug-encapsulated core-shell nanofibers comprising a hydrophilic core of collagen (Col) incorporated with berberine chloride (BC), an anti-inflammatory and anti-cancer agent used as a model drug, and a hydrophobic shell of poly-l-lactic acid (PLLA). Long-term drug release profiles under both the physiological and hydrolysis-accelerated conditions were measured and analyzed using a Korsmeyer-Peppas kinetics model. We found that the Col/PLLA core-shell fiber achieved a controllable long-term release of the hydrophilic drug incorporated inside the core by the slow degradation of the PLLA shell to prevent the burst release while PLLA monolithic fibers showed early release due to the dissolution of drug and the following rapid hydrolysis of fibers. As shown by the results of Col/PLLA core-shell fiber under a hydrolysis-accelerated condition to promote the release of drugs test, it would provide sustained release over 16 days under physiological conditions. Here, the development of the nanomaterial for the long-term drug release of hydrophilic drugs was achieved, leading to its potential medical application including cancer treatment.

Combination of structure-performance and shape-performance relationships for better biphasic release in electrospun Janus fibers

In nature, the combination of composition, structure, and shape determines the matter's functional performance to a large extent. Inspired by which, two electrospun Janus nanofiber formulations were created using side-by-side electrospinning in this work. Tamoxifen citrate (TAM) was used as a model drug and ethyl cellulose (EC) and polyvinylpyrrolidone K60 (PVP) as the polymer carrier matrices. The fibers have linear cylindrical morphologies and distinct Janus structures by scanning electron microscopy. One side of the fibers took a round shape, while the other was crescent-shaped. The drug was present in both polymer matrices in the form of amorphous solid dispersions, owing to strong intermolecular interactions between drug and polymer. In vitro dissolution tests demonstrated that both sets of fibers could provide biphasic drug release due to the difference in solubility of PVP and EC. The different shape of TAM-EC and TAM-PVP side of the Janus structure resulted in a considerable variation in the drug release profiles. The Janus structure with crescent TAM-PVP side and round TAM-EC side gave a more rapid burst release in the first phase of release, and slower sustained release in the second phase. This work thus reports a new strategy for systematically developing advanced functional nanomaterials based on both shape- and structure-performance relationships.

Electrospun Functional Nanofiber Membrane for Antibiotic Removal in Water: Review

As a new kind of water pollutant, antibiotics have encouraged researchers to develop new treatment technologies. Electrospun fiber membrane shows excellent benefits in antibiotic removal in water due to its advantages of large specific surface area, high porosity, good connectivity, easy surface modification and new functions. This review introduces the four aspects of electrospinning technology, namely, initial development history, working principle, influencing factors and process types. The preparation technologies of electrospun functional fiber membranes are then summarized. Finally, recent studies about antibiotic removal by electrospun functional fiber membrane are reviewed from three aspects, namely, adsorption, photocatalysis and biodegradation. Future research demand is also recommended.

Electrospinning nanofiber technology: a multifaceted paradigm in biomedical applications

This review focuses on the process of preparation of nanofibers via Es, the design and setup of the instrument, critical parameter optimization, preferable polymers, solvents, characterization techniques, and recent development and biomedical applications of nanofibers.

Preparation and Characterization of Electrospun Double-layered Nanocomposites Membranes as a Carrier for Centella asiatica (L.)

A wide range of naturally derived and synthetic biodegradable and biocompatible polymers are today regarded as promising materials for improving skin regeneration. Alongside this, these materials have been explored in conjunction with different types of antimicrobial and bioactive agents, especially natural-derived compounds, to enhance their biological properties. Herein, a double-layered nanocomposite dressing membrane was fabricated with two distinct layers. A bottom layer from Chitosan-Sodium tripolyphosphate (CS-TPP) and Poly(vinyl alcohol) (PVA) containing Centella asiatica (L.) (CA) was electrospun directly over a Polycaprolactone (PCL) layer to improve the biologic performance of the electrospun nanofibers. In turn, the PCL layer was designed to provide mechanical support to the damaged tissue. The results revealed that the produced double-layered nanocomposite membrane closely resembles the mechanical, porosity, and wettability features required for skin tissue engineering. On the other hand, the in vitro drug release profile of the PCL/PVA_CS-TPP containing CA exhibited a controlled release for 10 days. Moreover, the PVA_CS-TPP_CA's bottom layer displayed the highest antibacterial activity against Staphylococcus aureus (S. aureus) (99.96 ± 6.04%) and Pseudomonas aeruginosa (P. aeruginosa) (99.94 ± 0.67%), which is responsible for avoiding bacterial penetration while endowing bioactive properties. Finally, the 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay showed that this nanocomposite membrane was not cytotoxic for normal human dermal fibroblasts (NHDF) cells. Therefore, these findings suggest the potential use of the double-layered PCL/PVA_CS-TPP_CA as an efficient bionanocomposite dressing material.

Method for production of aligned nanofibers and fiber elasticity measurement

A novel method for collection of electrospun polymer nanofibers is proposed. This method can be applied to extrusion of various polymers and deposition on various types of substrates or without use of a substrate at all. The fiber is forced to alternate in its deposit in between two different segments of a collector electrode by a pair of square electric potential functions in anti-phase applied to these two electrode segments. As the fiber oscillation frequency is equal to the potential function frequency, the fiber deposition rate in between these two collector segments can be controlled. If an electrically non-conductive material is placed in between the two segments of the collector electrode, aligned fibers are simply deposited on the surface of this material. The method is used to perform stiffness measurements of the fibers demonstrating Young's modulus of 200.1 MPa with a standard deviation of 30.7 MPa. The stiffness measurement does not require any specialized equipment and requires minimal sample preparation. A sample consists of known amount of aligned fibers collected between a pair of thin coaxial rods leading to a cylindrical bundle with known number of fibers. A tensile test is then performed to obtain stress-strain curve and to find the Young's modulus of the fiber material.

Bioactive Sambong oil-loaded electrospun cellulose acetate nanofibers: Preparation, characterization, and in-vitro biocompatibility

Blumea balsamifera oil loaded cellulose acetate nanofiber mats were prepared by electrospinning. The inclusion of blumea oil increased the nanofiber diameter. FTIR spectra confirm the addition of blumea oil in the nanofiber mats. The XRD pattern suggests that the inclusion of blumea oil has caused a misalignment in the polymer chains of the cellulose acetate. Thus, a decrease in the tensile strength was observed for the blumea oil loaded nanofibers. The increase in fiber diameter causes a reduction in the porosity of the nanofiber mats. The blumea oil loaded nanofiber mats showed antibacterial efficacy against Escherichia coli and Staphylococcus aureus. The blumea oil showed antioxidant abilities against the DPPH solution. MVTR of the neat and blumea oil loaded nanofiber mats was in the range of 2450-1750 g/m²/day, which is adequate for the transport of air and moisture from the wound surface. Blumea oil loaded mats showed good cell viability ~92% for NIH 3T3 cells in more extended periods of incubation. A biphasic release profile was obtained, and the release followed the first-order kinetics depending upon the highest value of the coefficient of correlation R 2 (88.6%).

Fabrication of tri-layered electrospun polycaprolactone mats with improved sustained drug release profile

Modulation of initial burst and long term release from electrospun fibrous mats can be achieved by sandwiching the drug loaded mats between hydrophobic layers of fibrous polycaprolactone (PCL). Ibuprofen (IBU) loaded PCL fibrous mats (12% PCL-IBU) were sandwiched between fibrous polycaprolactone layers during the process of electrospinning, by varying the polymer concentrations (10% (w/v), 12% (w/v)) and volume of coat (1 ml, 2 ml) in flanking layers. Consequently, 12% PCL-IBU (without sandwich layer) showed burst release of 66.43% on day 1 and cumulative release (%) of 86.08% at the end of 62 days. Whereas, sandwich groups, especially 12% PCLSW-1 & 2 (sandwich layers-1 ml and 2 ml of 12% PCL) showed controlled initial burst and cumulative (%) release compared to 12% PCL-IBU. Moreover, crystallinity (%) and hydrophobicity of the sandwich models imparted control on ibuprofen release from fibrous mats. Further, assay for cytotoxicity and scanning electron microscopic images of cell seeded mats after 5 days showed the mats were not cytotoxic. Nuclear Magnetic Resonance spectroscopic analysis revealed weak interaction between ibuprofen and PCL in nanofibers which favors the release of ibuprofen. These data imply that concentration and volume of coat in flanking layer imparts tighter control on initial burst and long term release of ibuprofen.

Electrospun Multiple-Chamber Nanostructure and Its Potential Self-Healing Applications

To address the life span of materials in the process of daily use, new types of structural nanofibers, fabricated by multifluid electrospinning to encapsulate both epoxy resin and amine curing agent, were embedded into an epoxy matrix to provide it with self-healing ability. The nanofibers, which have a polyacrylonitrile sheath holding two separate cores, had an average diameter of 300 ± 140 nm with a uniform size distribution. The prepared fibers had a linear morphology with a clear three-chamber inner structure, as verified by scanning electron microscope and transmission electron microscope images. The two core sections were composed of epoxy and amine curing agents, respectively, as demonstrated under the synergistic characterization of Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry. The TGA results disclosed that the core-shell nanofibers contained 9.06% triethylenetetramine and 20.71% cured epoxy. In the electrochemical corrosion experiment, self-healing coatings exhibited an effective anti-corrosion effect, unlike the composite without nanofibers. This complex nanostructure was proven to be an effective nanoreactor, which is useful to encapsulate reactive fluids. This engineering process by multiple-fluid electrospinning is the first time to prove that this special multiple-chamber structure has great potential in the field of self-healing.

Williams G. Energy-Saving Electrospinning with a Concentric Teflon-Core Rod Spinneret to Create Medicated Nanofibers

Although electrospun nanofibers are expanding their potential commercial applications in various fields, the issue of energy savings, which are important for cost reduction and technological feasibility, has received little attention to date. In this study, a concentric spinneret with a solid Teflon-core rod was developed to implement an energy-saving electrospinning process. Ketoprofen and polyvinylpyrrolidone (PVP) were used as a model of a poorly water-soluble drug and a filament-forming matrix, respectively, to obtain nanofibrous films via traditional tube-based electrospinning and the proposed solid rod-based electrospinning method. The functional performances of the films were compared through in vitro drug dissolution experiments and ex vivo sublingual drug permeation tests. Results demonstrated that both types of nanofibrous films do not significantly differ in terms of medical applications. However, the new process required only 53.9% of the energy consumed by the traditional method. This achievement was realized by the introduction of several engineering improvements based on applied surface modifications, such as a less energy dispersive air-epoxy resin surface of the spinneret, a free liquid guiding without backward capillary force of the Teflon-core rod, and a smaller fluid-Teflon adhesive force. Other non-conductive materials could be explored to develop new spinnerets offering good engineering control and energy savings to obtain low-cost electrospun polymeric nanofibers.

On-line dissolution analysis of multiple drugs encapsulated in electrospun nanofibers

Electrospun nanofiber is a very attractive material which can be used as the support to form multiple-drug dosage. Understanding the dissolution process of different active drug ingredients released from electrospun fibers is of great importance to control and evaluate the quality of medicated nanofibers. Here we present the first study of on-line automatic analysis of dissolution of multiple drugs in electrospun fiber mats. Single-needle electrospinning technology is utilized to combine polymers, hydrophilic polyvinylpyrrolidone (PVP) and hydrophobic polycaprolactone (PCL) as carrier to load three poorly water-soluble non-steroidal anti-inflammatory drugs (paracetamol, nimesulide, and ibuprofen). The loading of the drugs in PVP/PCL electrospun fibers are characterized by various techniques, including scanning electron microscopy, X-ray diffraction, Fourier infrared spectroscopy and differential scanning calorimetry. The in vitro dissolution is investigated by our home-made portable analyzer, which can simultaneously on-line determine multiple drugs released from the nanofibers by a single step. The analysis shows a wide linear detection range of the drugs with limit-of-detection (LOD) down to μg/mL-level. The dissolution profiles of three ingredients in nanofibers can be monitored every thirty seconds from the beginning to the end in the entire dissolution process from only one HSCE run. The kinetic information of the dissolution, including the dissolution curve, characteristic dissolution time and dissolution efficiency, is obtained and evaluated for different dissolution media, drug loading content and the ratio of PVP/PCL. Our study provides a promising method for rapid and accurate dissolution testing of nanofiber-based drugs, and would extend the applications of separation techniques in pharmaceutical analysis.

Core-Shell Eudragit S100 Nanofibers Prepared via Triaxial Electrospinning to Provide a Colon-Targeted Extended Drug Release

In this study, a new modified triaxial electrospinning is implemented to generate an Eudragit S100 (ES100)-based core-shell structural nanofiber (CSF), which is loaded with aspirin. The CSFs have a straight line morphology with a smooth surface, an estimated average diameter of 740 ± 110 nm, and a clear core-shell structure with a shell thickness of 65 nm, as disclosed by the scanning electron microscopy and transmission electron microscopy results. Compared to the monolithic composite nanofibers (MCFs) produced using traditional blended single-fluid electrospinning, aspirin presented in both of them amorously owing to their good compatibility. The CSFs showed considerable advantages over the MCFs in providing the desired drug-controlled-release profiles, although both of them released the drug in an erosion mechanism. The former furnished a longer time period of time-delayed-release and a smaller portion released during the first two-hour acid condition for protecting the stomach membranes, and also showed a longer time period of aspirin-extended-release for avoiding possible drug overdose. The present protocols provide a polymer-based process-nanostructure-performance relationship to optimize the reasonable delivery of aspirin.

Electrosprayed Ultra-Thin Coating of Ethyl Cellulose on Drug Nanoparticles for Improved Sustained Release

In nanopharmaceutics, polymeric coating is a popular strategy for modifying the drug release kinetics and, thus, new methods for implementing the nanocoating processes are highly desired. In the present study, a modified coaxial electrospraying process was developed to formulate an ultra-thin layer of ethyl cellulose (EC) on a medicated composite core consisting of tamoxifen citrate (TAM) and EC. A traditional single-fluid blending electrospraying and its monolithic EC-TAM nanoparticles (NPs) were exploited to compare. The modified coaxial processes were demonstrated to be more continuous and robust. The created NPs with EC coating had a higher quality than the monolithic ones in terms of the shape, surface smoothness, and the uniform size distribution, as verified by the SEM and TEM results. XRD patterns suggested that TAM presented in all the NPs in an amorphous state thanks to the fine compatibility between EC and TAM, as indicated by the attenuated total reflection (ATR)-FTIR spectra. In vitro dissolution tests demonstrated that the NPs with EC coating required a time period of 7.58 h, 12.79 h, and 28.74 h for an accumulative release of 30%, 50%, and 90% of the loaded drug, respectively. The protocols reported here open a new way for developing novel medicated nanoparticles with functional coating.

Dual-function membranes based on alginate/methyl cellulose composite for control drug release and proliferation enhancement of fibroblast cells

Membranes based on natural polymers are highly promising therapies for skin damaged sites as they can mimic its biological microstructure to support the fibroblasts cells survival and proliferation. In addition, these membranes could be loaded with active molecules that help in skin regeneration and eliminate the potential bacterial infection. This research aims to formulate novel medicated membranes for controlled release and cytocompatibility elevation of fibroblast cells for engineering of soft tissue. Pre-formulation researches have been conducted for membranes of sodium alginate (Alg)/methyl cellulose (MC) that used loaded with undoped, Bi doped and Bi, Cu co-doped SrTiO₃ using solvent casting technique. In addition, another group of these membranes were loaded with DOXycycline antibiotic (DOX) as model drug as well as for eliminating the potential bacterial infections. The prepared membranes were evaluated by XRD, SEM-EDX, FTIR, Zetasizer, and swelling behaviour was also tested. Profiles of the released drug were determined using phosphate-buffered saline (PBS) (pH 7.4) at 37 °C for 30 days. The investigation of the cytocompatibility and proliferation of fibroblast cells with the prepared membranes were conducted. The XRD, FTIR and SEM data recognised the possible interaction that takes place among Alg and MC, through presence of hydrogen bonds. Existence of the nano-particles within the membrane polymer matrix enhanced the membrane stability and enhanced the drug release rate (from 20 to 45%). Medication release mechanism elucidated that DOX was released from all the fabricated membranes through the relaxation of polymer matrix that takes place after swelling. The filler type and/or dopant type possess no remarkable influence on the cytotoxicity of the membranes against the investigated cells when compared to their individual influence on the same cells. Cells attachments results have revealed an impressive effect for DOX-loaded membranes on the cells affinity and growth. These membranes are recommended for treatments of skin infections.

Electrospun freestanding hydrophobic fabric as a potential polymer semi-permeable membrane for islet encapsulation

One of the significant problems associated with islet encapsulation for type 1 diabetes treatment is the loss of islet functionality or cell death after transplantation because of the unfavorable environment for the cells. In this work, we propose a simple strategy to fabricate electrospun membranes that will provide a favorable environment for proper islet function and also a desirable pore size to cease cellular infiltration, protecting the encapsulated islet from immune cells. By electrospinning the wettability of three different biocompatible polymers: cellulose acetate (CA), polyethersulfone (PES), and polytetrafluoroethylene (PTFE) was greatly modified. The contact angle of electrospun CA, PES, and PTFE increased to 136°, 126°, and 155° as compared to 55°, 71°, and 128° respectively as a thin film, making the electrospun membranes hydrophobic. Commercial porous membranes of PES and PTFE show a contact angle of 30° and 118°, respectively, confirming the hydrophobicity of electrospun membranes is due to the surface morphology induced by electrospinning. In- vivo results confirm that the induced hydrophobicity and surface morphology of electrospun membranes impede cell attachment, which would help in maintaining the 3D circular morphology of islet cell. More importantly, the pore size of 0.3-0.6 μm obtained due to the densely packed structure of nanofibers, will be able to restrict immune cells but would allow free movement of molecules like insulin and glucose. Therefore, electrospun polymer fibrous membranes as fabricated in this work, with hydrophobic and porous properties, make a strong case for successful islet encapsulation.

Well-Blended PCL/PEO Electrospun Nanofibers with Functional Properties Enhanced by Plasma Processing

Biodegradable composite nanofibers were electrospun from poly(ε-caprolactone) (PCL) and poly(ethylene oxide) (PEO) mixtures dissolved in acetic and formic acids. The variation of PCL:PEO concentration in the polymer blend, from 5:95 to 75:25, revealed the tunability of the hydrolytic stability and mechanical properties of the nanofibrous mats. The degradation rate of PCL/PEO nanofibers can be increased compared to pure PCL, and the mechanical properties can be improved compared to pure PEO. Although PCL and PEO have been previously reported as immiscible, the electrospinning into nanofibers having restricted dimensions (250–450 nm) led to a microscopically mixed PCL/PEO blend. However, the hydrolytic stability and tensile tests revealed the segregation of PCL into few-nanometers-thin fibrils in the PEO matrix of each nanofiber. A synergy phenomenon of increased stiffness appeared for the high concentration of PCL in PCL/PEO nanofibrous mats. The pure PCL and PEO mats had a Young’s modulus of about 12 MPa, but the mats made of high concentration PCL in PCL/PEO solution exhibited 2.5-fold higher values. The increase in the PEO content led to faster degradation of mats in water and up to a 20-fold decrease in the nanofibers’ ductility. The surface of the PCL/PEO nanofibers was functionalized by an amine plasma polymer thin film that is known to increase the hydrophilicity and attach proteins efficiently to the surface. The combination of different PCL/PEO blends and amine plasma polymer coating enabled us to tune the surface functionality, the hydrolytic stability, and the mechanical properties of biodegradable nanofibrous mats.