Pectin based multi-particulate carriers for colon-specific delivery of therapeutic agents

Development, characterization and Lactobacillus plantarum encapsulating ability of novel C-phycocyanin-pectin-polyphenol based hydrogels

In this study, it was found that the enhancement in the viability of Lactobacillus plantarum under gastrointestinal conditions by encapsulating them within novel C-Phycocyanin-pectin based hydrogels (from 5.7 to 7.1 log/CFU). The hardness, the strength and the stability of the hydrogels increased when the protein concentration was increased. In addition, the addition of resveratrol (RES), and tannic acid (TA) could improve the hardness (from 595.4 to 608.3 and 637.0 g) and WHC (from 93.9 to 94.2 and 94.8 %) of the hydrogels. The addition of gallic acid (GA) enhanced the hardness (675.0 g) of the hydrogels, but the WHC (86.2 %) was decreased. During simulated gastrointestinal conditions and refrigerated storage, the addition of TA enhanced the viable bacteria counts (from 6.8 and 8.0 to 7.5 and 8.5 log/CFU) of Lactobacillus plantarum. Furthermore, TA and GA are completely encased by the protein-pectin gel as an amorphous state, while RA is only partially encased.

Understanding the role of the structure of single-stimuli hybrid systems on their behaviour as platforms for colonic delivery

The success of colon-targeted oral hybrid systems relies in the proper control over the release of the entrapped nanostructures at the colon. This work describes the design of hybrid systems for their colonic enzyme-triggered release. The hybrid systems were constituted by nanoemulsions, with adequate characteristics for the treatment of ulcerative colitis, included in a pectin hydrogel-like matrix. For that purpose, pectins with similar degrees of methylation (< 50%) and increasing degree of amidation, i.e. 0, 13 and 20%, were selected. Hybrid systems were formulated by a novel aggregation induced gelation method, using Ca2+, Ba2+ or Zn2+ as aggregating agents, as well as by a polyelectrolyte condensation approach, obtaining structures in the micrometric range (< 10 μm). Despite the resistance of pectins to the upper gastrointestinal tract stimuli, the analysis of the behaviour of the different prototypes showed that the non-covalent crosslinks that allow the formation of the hybrid structure may play a relevant role on the performance of the formulation.Our results indicated that the partial disassembling of the hybrid system's microstructure due to the intestinal conditions may facilitate the stimuli-triggered release of the nanoemulsions at the colon. More interestingly, the particle tracking experiments showed that the condensation process that occurs during the formation of the system may affect to the enzymatic degradation of pectin. In this sense, the effect of the high degree of amidation of pectin may be more prevalent as structural feature rather than as a promoter of the enzyme-triggered release.

Pectin hydrogels for controlled drug release: Recent developments and future prospects

Pectin hydrogels have emerged as a highly promising medium for the controlled release of pharmaceuticals in the dynamic field of drug delivery. The present review sheds light on the broad range of applications and potential of pectin-based hydrogels in pharmaceutical formulations. Pectin, as a biopolymer, is a versatile candidate for various drug delivery systems because of its wide range of properties and characteristics. The information provided on formulation strategies and crosslinking techniques provides researchers with tools to improve drug entrapment and controlled release. Furthermore, this review provides a more in-depth understanding of the complex factors influencing drug release from pectin hydrogels, such as the impact of environmental conditions and drug-specific characteristics. Pectin hydrogels demonstrate adaptability across diverse domains, ranging from applications in oral and transdermal drug delivery to contributions in wound healing, tissue engineering, and ongoing clinical trials. While standardization and regulatory compliance remain significant challenges, the future of pectin hydrogels appears to be bright, opening up new possibilities for advanced drug delivery systems.

Improved viability of probiotics by encapsulation in chickpea protein matrix during simulated gastrointestinal digestion by succinylated modification

The potential application of succinylated chickpea protein (SCP) as a wall material for spray-dried microencapsulated probiotics was investigated. The results showed that succinylation increased the surface charge of chickpea proteins (CP) and reduced the particle size of the proteins. Meanwhile, succinylated modification decreased the solubility of protein under acidic conditions and increased the solubility in alkaline conditions. The effects of spray drying and in vitro gastrointestinal digestion on probiotics were investigated by microencapsulating chickpea protein with different degrees of N-succinylation. The results showed that all microcapsules had similar morphology, particle size and low water content. The microcapsules prepared by succinylated chickpea protein showed better stability and viability during spray drying and gastrointestinal digestion. The protective effect of probiotics was better as the degree of N-succinylation increased. In particular, the SCP-3-P sample (10 % succinic anhydride modified CP and maltodextrin) lost only 0.29 Log CFU/g throughout gastrointestinal digestion. The superior protective effect provided by succinylated CP in simulated gastric fluid (SGF) was mainly attributed to the reaction of succinic anhydride with protein to cause protein aggregation under gastric acidic conditions, reducing the infiltration of gastric acid and pepsin and maintaining the structural integrity of the microcapsules. Therefore, these findings provide a new strategy for probiotic intestinal delivery and application of chickpea protein.

Structural, chemical and technofunctional properties pectin modification by green and novel intermediate frequency ultrasound procedure

The impact of intermediate frequency ultrasound (IFUS, 582, 864 and 1144 kHz), mode of operation (continue and pulsed) and ascorbic acid (Aa) addition on the structural, chemical and technofunctional properties of commercial citrus high methoxyl-grade pectin (HMP) was investigated. The chemical dosimetry of IFUS, monitored by the triiodide formation rate (I3-), demonstrated that the pulsed ratio (1900 ms on/100 ms off) at the three frequencies was similar to that of continue mode but IFUS1144 kHz produced more acoustic streaming demonstrated by the height liquid measured using image analysis. In presence of Aa, HMP presented higher fragmentation than in its absence. IFUS did not give rise any changes in the main functional groups of the HMP. In general, a reduction in molecular weight was observed, being the presence of Aa the most influencing factor. Regarding monosaccharides, IFUS modified the structure of homogalacturonan and rhamnogalacturonan-I and increased of GalA contents of the HMP in presence of Aa at the above three frequencies. A reducing of the consistency index (k) and increasing of the flow index (n) of HMP were showed by IFUS frequency and Aa addition. The emulsifying activity and stability index were increased for HMP treated by IFUS in continue mode at all frequencies and in presence of Aa. The results presented in this research shown the effectiveness of IFUS as tool to modify pectin into different structures with different functionalities.

Advances in polysaccharides for probiotic delivery: Properties, methods, and applications

Probiotics are essential to improve the health of the host, whereas maintaining the viability of probiotics in harsh environments remains a challenge. Polysaccharides have non-toxicity, excellent biocompatibility, and outstanding biodegradability, which can protect probiotics by forming a physical barrier and show a promising prospect for probiotic delivery. In this review, we summarize polysaccharides commonly used for probiotic microencapsulation and introduce the microencapsulation technologies, including extrusion, emulsion, spray drying, freeze drying, and electrohydrodynamics. We discuss strategies for better protection of probiotics and introduce the applications of polysaccharides-encapsulated probiotics in functional food, oral formulation, and animal feed. Finally, we propose the challenges of polysaccharides-based delivery systems in industrial production and application. This review will help provide insight into the advances and challenges of polysaccharides in probiotic delivery.

In-situ speciation and estimation of iron(II) and iron(III) contents in anisotropic polysaccharide-based hydrogel by 1H low-field nuclear magnetic resonance

This article aims to quantify and differentiate in-situ iron(II) and/or iron(III) in heterogeneous polygalacturonate hydrogels using the 1H-NMR relaxometry technique. This holds significant importance, for example, in addressing iron-deficiency anemia through the oral administration of iron(II) supplements. The NMR dispersion profiles of the gels exhibited markedly distinct relaxation behaviors corresponding to the different iron oxidation states. At 20 MHz, two primary relaxation mechanisms must be considered: relaxation arising from water molecules confined within the polygalacturonate fiber mesh and paramagnetic relaxation due to iron cations. When iron(III) serves as the cross-linking agent, paramagnetic interaction dominates the relaxation, while with iron(II) as the cross-linker, both mechanisms have to be considered. To distinguish labile from structuring iron, we monitored the evolution of iron concentrations within the gels during successive washes using NMR and atomic absorption spectroscopy. Eventually, a gel containing both iron(II) and iron(III) was analyzed, and successful differentiation between the two cations was achieved. NMR relaxometry demonstrates powerful capabilities in terms of in-situ experiments, rapid results, speciation (iron(II)/iron(III)), and quantification (labile/ bridging iron).

Pathologically catalyzed physical coating restores the intestinal barrier for inflammatory bowel disease therapy

Intestinal epithelia impairment of inflammatory bowel disease (IBD) leads to the leakage of bacteria and antigens and the consequent persistent immune imbalance. Restoring the epithelial barrier is a promising therapeutic target but lacks effective and safe clinical interventions. By identifying the catalase (CAT) presence in the IBD pathological environment, we herein develop a CAT-catalyzed pathologically coating on the damaged epithelial barrier to inhibit intestinal leakage for IBD therapy. With the codelivery of CaO2 (a CAT substrate) and dopamine, the nanosystem can enable CAT-catalyzed oxygen (O2) production and in-situ polymerization of dopamine and then yield a thin and integrative polydopamine (PDA) coating on the intestinal barrier due to the highly adhesive property of PDA. In vivo study demonstrates that PDA coating provides not only a protective barrier by restricting intestinal leakage but also a favorable anti-inflammation effect. Beyond drug management, this work provides a physical repair strategy via catalyzed coating for IBD therapy.

Recent research advances on oral colon-specific delivery system of nature bioactive components: A review

Oral colon-specific delivery system (OCDS) is a targeted approach that aims to directly deliver bioactive compounds directly to the colon following oral administration, thereby enhancing the colonic release of bioactive substances and minimizing adverse reactions. The effectiveness of bioactive substances in the colon hinges on the degree of release, which are affected by various factors including pH, mucosal barrier, delivery time and so on. Therefore, this review provides a comprehensive overview of the key factors affecting oral colon-specific release of bioactive components firstly. Considering the oral safety, this review then mainly focuses on the types of carriers with edible OCDS and preparation strategies for OCDS. Finally, several preparation strategies for loading typical natural bioactive ingredients into oral safe OCDS are reviewed, along with future development prospects.

Pectin a multifaceted biopolymer in the management of cancer: A review

This review article focuses on the multifaceted roles of pectin in cancer management, namely as an oncotherapeutic delivery vehicle and a pharmacological agent. Over the past decades, the potential of pectin as a novel therapeutical agent for the prevention and/or management of cancer has gained increasing interest. Pectin has been found to modulate different mechanisms involved in the onset and progression of carcinogenesis, such as galectin-3 inhibition, caspase-3-induced apoptosis, and autophagy. Elucidating the structure-activity relationship provides insight into the relationship between the structure of pectin and different mechanism/s. The bioactivity of pectin, with respect to its structure, was critically discussed to give a better insight of the relationship between the structure of the extracted pectin and the observed bioactive effects. The rhamnogalacturonan I part of the pectin chain was found to bind to galectin-3, associated with several cancer hallmarks. The anti-inflammatory and antioxidant potential of pectin were also described. The roles of pectin as a treatment enhancer and a drug delivery vehicle for oncotherapeutics were critically defined. The scientific findings presented in this paper are expected to highlight the potential and role of pectin recovered from various plant sources in preventing and managing cancer.

Towards Valorization of Food-Waste-Derived Pectin: Recent Advances on Their Characterization and Application

Pectin, a natural biopolymer, can be extracted from food waste biomass, adding value to raw materials. Currently, commercial pectin is mostly extracted from citrus peels (85.5%) and apple pomace (14.0%), with a small segment from sugar beet pulp (0.5%). However, driven by high market demand (expected to reach 2.12 billion by 2030), alternative agro-industrial waste is gaining attention as potential pectin sources. This review summarizes the recent advances in characterizing pectin from both conventional and emerging food waste sources. The focus is the chemical properties that affect their applications, such as the degree of esterification, the neutral sugars' composition, the molecular weight, the galacturonic acid content, and technological-functional properties. The review also highlights recent updates in nutraceutical and food applications, considering the potential use of pectin as an encapsulating agent for intestinal targeting, a sustainable biopolymer for food packaging, and a functional and emulsifying agent in low-calorie products. It is clear from the considered literature that further studies are needed concerning the complexity of the pectin structure extracted from emerging food waste raw materials, in order to elucidate their most suitable commercial application.

Oral delivery of porous starch-loaded bilayer microgels for controlled drug delivery and treatment of ulcerative colitis

We prepared one type of bilayer microgels for oral administration with three effects: pH responsiveness, time lag, and colon enzyme degradation. Combined with the dual biological effects of curcumin (Cur) for reducing inflammation and promoting repair of colonic mucosal injury, targeted colonic localization and release of Cur according to the colonic microenvironment were enhanced. The inner core, derived from guar gum and low-methoxyl pectin, afforded colonic adhesion and degradation behavior; the outer layer, modified by alginate and chitosan via polyelectrolyte interaction, achieved colonic localization. The porous starch (PS)-mediated strong adsorption allowed Cur loading in inner core to achieve a multifunctional delivery system. In vitro, the formulations exhibited good bioresponses at different pH conditions, potentially delaying Cur release in the upper gastrointestinal tract. In vivo, dextran sulfate sodium-induced ulcerative colitis (UC) symptoms were significantly alleviated after oral administration, accompanied by reduced levels of inflammatory factors. The formulations facilitated colonic delivery, allowing Cur accumulation in colonic tissue. Moreover, the formulations could alter gut microbiota composition in mice. During Cur delivery, each formulation increased species richness, decreased pathogenic bacterial content, and afforded synergistic effects against UC. These PS-loaded bilayer microgels, exhibiting excellent biocompatibility, multi-bioresponsiveness, and colon targeting, could be beneficial in UC therapy, allowing development into a novel oral formulation.

Orally Administrated Olsalazine-Loaded Multilayer Pectin/Chitosan/Alginate Composite Microspheres for Ulcerative Colitis Treatment

The pathogenesis of inflammatory bowel diseases (IBDs) including ulcerative colitis (UC) and Crohn's disease is extremely cloudy. Maintaining the level of remission lesions in colitis is the default treatment attitude at present. Epithelial barrier restoration is considered as the same important strategy as colonic targeted drug delivery in UC treatment. In this paper, we developed a multilayer natural polysaccharide microsphere (pectin/chitosan/alginate) with pH and enzyme dual sensitivity to reduce the loss of medication in the upper digestive tract and preferentially adhere to exposed epithelial cells in colonic tissues by electrostatic forces for efficiently targeted UC treatment. Olsalazine as an inflammatory drug was efficiently loaded in the chitosan layer and realized a colonic pH-responsive drug release. Furthermore, the multilayer microspheres exhibited excellent capability in suppressing harmful flora and a bio-adhesion effect to extend the duration of local medicine. In the in vivo anti-colitis study, the downregulated levels of pro-inflammatory factors and the increase of tight junction protein indicated the excellent anti-inflammation effect of the olsalazine-loaded microspheres. In summary, these results showed that the multilayer natural polysaccharide microspheres could be a powerful candidate in the targeted drug delivery system for UC therapy.

Bio-adhesive and ROS-scavenging hydrogel microspheres for targeted ulcerative colitis therapy

Ulcerative colitis (UC) as an important type of inflammatory bowel disease is a chronic disease characterized by intestinal dyshomeostasis. The UC treatment is challenged by the insufficiency of drug delivery and retention. Herein, we fabricated an intrarectal formulation of olsalazine (Olsa)-loaded hydrogel microspheres (LDKT/Olsa) with good bio-adhesiveness and reactive oxygen species (ROS)-scavenging ability to enhance drug retention and therapeutic effect. Low methoxy pectin-dopamine conjugate/konjac glucomannan composite hydrogel microspheres (LDKT) with a size ranging from 10 to 100 μm were prepared by using Zn²⁺ and ROS-sensitive thioketal as crosslinkers. Upon intrarectal administration, the negatively charged and dopamine-functionalized hydrogel microspheres efficiently adhered to cationic surface of inflammatory mucosa, scavenging ROS and releasing Zn²⁺ and Olsa for antibacterial and anti-inflammatory effects. In the dextran sodium sulfate (DSS)-induced mouse UC model, the microspheres significantly reduced the levels of colonic ROS and pro-inflammatory cytokines, improved gut mucosal barrier integrity, and remarkably relieved colitis. Overall, the LDKT microspheres are promising carriers to deliver drugs for UC treatment.

Controlled release of Lactiplantibacillus plantarum by colon-targeted adhesive pectin microspheres: Effects of pectin methyl esterification degrees

The aim of this study is to report the preparation of pectin microspheres by varying degrees of methyl esterification (DM) cross-linked with divalent cationic calcium to encapsulate Lactiplantibacillus plantarum STB1 and L. plantarum LJ1, respectively. Scanning electron microscopy revealed the compact and smooth surface of pectin of DM 28 %, and the stochastic distribution of L. plantarum throughout the gel reticulation. And the pectin of DM 28 % considerably increased probiotics tolerance after continuous exposure to stimulated gastrointestinal tract conditions, with viable counts exceeding 10⁹ CFU/mL. This data indicated that low methoxy-esterification pectin was more efficient to improve the targeted delivery of probiotics in GIT. Additionally, the controlled release of microspheres was dependent on various pH levels. At pH 7.4, the release rates of L. plantarum STB1 and L. plantarum LJ1 reached up to 97.63 % and 95.33 %, respectively. Finally, the Caco-2 cell adhesion model was used to evaluate the cell adhesion rate after encapsulation, which exhibited better adhesion at DM of 60 %.

Encapsulation of Marjoram Phenolic Compounds Using Chitosan to Improve Its Colon Delivery

In this study, chitosan particles were used to encapsulate marjoram phenolic compounds as colon-specific drug-delivery systems. The microparticles were prepared by ionic gelation and spray-drying techniques and varying amounts of polymer and extract, along with different method conditions. The spray drying of microparticles (0.75% low molecular weight chitosan dissolved in 0.4% of acetic acid) presented the best encapsulation efficiency (near 75%), with size ranges from 1.55 to 1.68 µm that allowed the encapsulation of 1.25-1.88 mg/mL of extract. Release studies of individual marjoram phenolic compounds at pH 2 and 7.4 showed that most of the compounds remained encapsulated in the microparticles. Only arbutin and vicenin II presented a high initial burst release. As the polarity of the compounds was reduced, their initial release decreased. In addition, after gastrointestinal digestion, most of marjoram phenolic compounds remained encapsulated. These results prove that chitosan microparticlescould protect the marjoram phenolic compounds during gastrointestinal digestion, specifically those related to anticancer activity, which enables their application as colon-specific delivery systems.

Mucoadhesive carriers for oral drug delivery

Among the various dosage forms, oral medicine has extensive benefits including ease of administration and patients' compliance, over injectable, suppositories, ocular and nasal. Despite of extensive demand and emerging advantages, over 50% of therapeutic molecules are not available in oral form due to their physicochemical properties. More importantly, most of the biologics, proteins, peptide, and large molecular drugs are mostly available in injectable form. Conventional oral drug delivery system has limitation such as degradation and lack of stability within stomach due to presence of highly acidic gastric fluid, hinders their therapeutic efficacy and demand more frequent and higher dosing. Hence, formulation for controlled, sustained, and targeted drug delivery, need to be designed with feasibility to target the specific region of gastrointestinal (GI) tract such as stomach, small intestine, intestine lymphatic, and colon is challenging. Among various oral delivery approaches, mucoadhesive vehicles are promising and has potential for improving oral drug retention and controlled absorption to treat local diseases within the GI tract, as well systemic diseases. This review provides the overview about the challenges and opportunities to design mucoadhesive formulation for oral delivery of therapeutics in a way to target the specific region of the GI tract. Finally, we have concluded with future perspective and potential of mucoadhesive formulations for oral local and systemic delivery.

Eco-friendly pectin polymer film-based triboelectric nanogenerator for energy scavenging

Inspired by the desire to solve the energy-related issues in remote sensing applications, internet of things, wireless autonomous devices, and self-powered portable electronic devices, triboelectric nanogenerators (TENGs) have been highly promoted. However, for use in the specified applications, especially in wearable and biomedical devices, environmental-friendly materials are required. Herein, an eco-friendly pectin polymer is used as a positive triboelectric material to fabricate a TENG with excellent output performance. Working in conjunction with a polyimide, the polyimide and microarchitected pectin (MA@pectin) polymer film-based TENG (PP-TENG) generated open circuit voltage (V_OC), short circuit current (I_SC), and charge density (Q_SC) of ∼300 V, 14 μA, and 70 μC cm^-2, respectively, exhibiting remarkable enhancement compared to the TENG based on polyimide/pristine pectin polymer (V_OC, I_SC, and Q_SC of 170 V, 7.6 μA, and 47 μC cm^-2, respectively) under similar operating conditions. The output performance of the PP-TENG is particularly reliant on the pectin concentration, indicating an optimum concentration of 9 wt%. The improved performance of the PP-TENG was systematically analyzed and explained in terms of pectin concentration, dielectric constant, and surface roughness. Furthermore, the PP-TENG can power portable electronic devices and light-emitting diodes to prove the capability of the TENG in practical applications. The fabricated PP-TENG is anticipated to be a sustainable energy harvester via a low-cost and facile approach.

Natural Polysaccharide-Based Nanodrug Delivery Systems for Treatment of Diabetes

In recent years, natural polysaccharides have been considered as the ideal candidates for novel drug delivery systems because of their good biocompatibility, biodegradation, low immunogenicity, renewable source and easy modification. These natural polymers are widely used in the designing of nanocarriers, which possess wide applications in therapeutics, diagnostics, delivery and protection of bioactive compounds or drugs. A great deal of studies could be focused on developing polysaccharide nanoparticles and promoting their application in various fields, especially in biomedicine. In this review, a variety of polysaccharide-based nanocarriers were introduced, including nanoliposomes, nanoparticles, nanomicelles, nanoemulsions and nanohydrogels, focusing on the latest research progress of these nanocarriers in the treatment of diabetes and the possible strategies for further study of polysaccharide nanocarriers.

5-Fluorouracil and Curcumin Combination Coated with Pectin and Its Strategy towards Titanium Dioxide, Dimethylhydrazine Colorectal Cancer Model with the Evaluation of the Blood Parameters

Colorectal cancer is considered the third most common cancer and the second leading cause of death globally. It has been proven that titanium dioxide nanoparticles produce oxidative stress and can lead to chronic inflammation, which could turn into diseases like cancer, cardiovascular disorders, diabetes, and so on. To evaluate the effect of 5-fluorouracil (5-FU) curcumin (CUR) conjugate coated with pectin on colorectal cancer induced by titanium dioxide nanoparticles (TiO₂-NPs) and dimethylhydrazine (DMH), male rats were administered TiO₂-NPs (5 mg/kg) orally and DMH (1 mg/kg) peritoneally for 70 days and treated with 5-FU (60 mg/kg) and CUR (240 mg/kg) conjugate (1:4 ratio) coated with pectin. The bodyweight of the animals was evaluated, and the blood sugar level was calculated. Further blood and plasma analyses were conducted. Hematological parameters, antioxidant parameters, and biochemical estimation were taken into consideration. The TiO₂-NPs level in the blood and colorectal region was also calculated. With the induction of colon cancer using TiO₂-NPs and DMH, a significant increase in the body weight of the animals was seen; eventually, with treatment, it was reduced. The bodyweight increase was due to an increase in the blood sugar level. There were also significant changes in the hematological parameters and biochemical estimation reports when comparing those of the positive control, negative control, and treated groups. No significant effect on biochemical estimation reports was seen. Conclusions: These reports suggest that 5-FU CUR conjugate coated with pectin helps in the management of colorectal cancer induced by TiO₂-NPs and DMH.

Multidrug Resistance in Cancer Cells: Focus on a Possible Strategy Plan to Address Colon Carcinoma Cells

Even though various treatment methods are available for cancer, the death curve is not reducing. The diagnosis of cancer at the fourth stage and drug resistance are the leading reasons for treatment failure and lower survival rates. In this review article, we summarize the possible pitfalls during cancer treatment in general, which mainly include multidrug resistance, and propose a hypothesis for colorectal cancer specifically. We also evaluate multidrug resistance in cancer in general and colorectal cancer in particular and hypothesize a concept based on combination therapy with 5-fluorouracil, curcumin, and lipids for the possible management of colorectal cancer. In addition, a hypothetical approach, combining a synthetic agent and a natural chemotherapeutic agent, to treating colorectal cancer is also discussed. This hypothesis could improve the management of colorectal cancer.

Dual crosslinking of folic acid-modified pectin nanoparticles for enhanced oral insulin delivery

Pectin-based drug delivery systems hold great potential for oral insulin delivery, since they possess excellent gelling property, good mucoadhesion and high stability in the gastrointestinal (GI) tract. However, lack of enterocyte targeting ability and premature drug release in the upper GI tract of the susceptible ionic-crosslinked pectin matrices are two major problems to be solved. To address these issues, we developed folic acid (FA)-modified pectin nanoparticles (INS/DFAN) as insulin delivery vehicles by a dual-crosslinking method using calcium ions and adipic dihydrazide (ADH) as crosslinkers. In vitro studies indicated insulin release behaviors of INS/DFAN depended on COOH/ADH molar ratio in the dual-crosslinking process. INS/DFAN effectively prevented premature insulin release in simulated GI fluids compared to ionic-crosslinked nanoparticles (INS/FAN). At an optimized COOH/ADH molar ratio, INS/DFAN with FA graft ratio of 18.2% exhibited a relatively small particle size, high encapsulation efficiency and excellent stability. Cellular uptake of INS/DFAN was FA graft ratio dependent when it was at/below 18.2%. Uptake mechanism and intestinal distribution studies demonstrated the enhanced insulin transepithelial transport by INS/DFAN via FA carrier-mediated transport pathway. In vivo studies revealed that orally-administered INS/DFAN produced a significant reduction in blood glucose levels and further improved insulin bioavailability in type I diabetic rats compared to INS/FAN. Taken together, the combination of dual crosslinking and FA modification is an effective strategy to develop pectin nano-vehicles for enhanced oral insulin delivery.