Solar-light driven photocatalytic conversion of p -nitrophenol to p -aminophenol on CdS nanosheets and nanorods

Aminated graphene quantum dots/CdS nanobelts for enhanced photocatalytic degradation of RhB dye under visible light

CdS nanoparticles have wide applications as photocatalysts for degradation of organic pollutants, but due to their limited turnover number and off-pathway charge recombination processes, their degradation efficiency is low. Herein, aminated graphene quantum dots/CdS (GQDs/CdS) nanobelts were successfully fabricated by solvothermal and hydrothermal processes. The prepared GQDs/CdS were characterized by physical methods to investigate their structure, morphology, optical properties, specific surface area, element composition, and chemical state. GQDs/CdS materials promoted efficient charge separation, and showed high efficiency in the photocatalytic degradation of the organic dye Rhodamine B (RhB) under visible light. The degradation efficiency of RhB samples over 0.05 g of catalysts reached 97.40% after 150 min, a much higher efficiency in comparison to pure CdS. Electron paramagnetic resonance (EPR) spectroscopy provided direct evidence for ˙OH and ˙O2- as the reactive oxidative species using DMPO as a spin trap. Consistent with the experimental results, a possible mechanism of RhB photocatalytic degradation by GQDs/CdS under visible light was proposed. This work may provide environmentally friendly photocatalysts for degrading organic dyes and purifying water.

Catalytic Use toward the Redox Reaction of Toxic Industrial Wastes in Innocuous Aqueous Medium and Antibacterial Activity of Novel Cu x Ag x Zn1-2x O Nanocomposites

In this work, we report the redox properties in organic catalytic transformation and antibacterial activity of novel Cu x Ag x Zn1-2x O nanocomposites. Cu- and Ag-doped ZnO [Cu x Ag x Zn1-2x O (x = 0.1)] (CAZ), Cu-doped ZnO [Cu x Zn1-x O (x = 0.1)] (CZ), and Ag-doped ZnO [Ag x Zn1-x O (x = 0.1)] (AZ) were prepared via a chemical co-precipitation method. The synthesized nanocomposites were characterized using different spectroscopic techniques. The catalytic activity of CAZ, CZ, and AZ was examined for the reduction of 4-nitrophenol (4-NP) and 4-nitroaniline (4-NA) in the presence of NaBH4 in an aqueous medium. The photocatalytic oxidation efficiency of these catalysts was also observed against naphthol orange (NO) under ultraviolet light. It was found that the catalytic reduction and oxidation efficiency of CAZ is higher than that of CZ and AZ in 4-NP/4-NA and NO in a water solvent, respectively. The antibacterial property of CAZ was also studied against Gram-positive and Gram-negative bacteria by agar well diffusion and the minimum inhibitory concentration methods. It was found that CAZ shows better antimicrobial activity compared to its parental Cu(NO3)2·3H2O, AgNO3, and ZnO. Therefore, the incorporation of Cu and Ag into ZnO increases its catalytic and antimicrobial activity remarkably. Fourier-transform infrared and X-ray diffraction (XRD) studies of CAZ indicate the incorporation of Cu and Ag into the lattice of ZnO. The phase structure of CAZ was wurtzite hexagonal, and the average crystallite size was 93 ± 1 nm measured from XRD. The average grain size and particle size of CAZ were found to be 200 and 100 ± 5 nm originating from SEM and transmission electron microscopy studies, respectively. The optical energy band gap of CAZ is 3.15 eV, which supports the excellent photocatalyst under UV light. CAZ also exhibits good agreement for photoluminescence properties with a high intensity peak at 571 nm, indicating surface oxygen vacancies and defects which might be responsible for higher photocatalytic activity compared to others. The nanocomposite shows excellent reusability without any significant loss of activity.

Dithiocarbamate Complexes as Single Source Precursors to Nanoscale Binary, Ternary and Quaternary Metal Sulfides

Nanodimensional metal sulfides are a developing class of low-cost materials with potential applications in areas as wide-ranging as energy storage, electrocatalysis, and imaging. An attractive synthetic strategy, which allows careful control over stoichiometry, is the single source precursor (SSP) approach in which well-defined molecular species containing preformed metal-sulfur bonds are heated to decomposition, either in the vapor or solution phase, resulting in facile loss of organics and formation of nanodimensional metal sulfides. By careful control of the precursor, the decomposition environment and addition of surfactants, this approach affords a range of nanocrystalline materials from a library of precursors. Dithiocarbamates (DTCs) are monoanionic chelating ligands that have been known for over a century and find applications in agriculture, medicine, and materials science. They are easily prepared from nontoxic secondary and primary amines and form stable complexes with all elements. Since pioneering work in the late 1980s, the use of DTC complexes as SSPs to a wide range of binary, ternary, and multinary sulfides has been extensively documented. This review maps these developments, from the formation of thin films, often comprised of embedded nanocrystals, to quantum dots coated with organic ligands or shelled by other metal sulfides that show high photoluminescence quantum yields, and a range of other nanomaterials in which both the phase and morphology of the nanocrystals can be engineered, allowing fine-tuning of technologically important physical properties, thus opening up a myriad of potential applications.

Spectrophotometric Determination of p-Nitrophenol under ENP Interference

Engineered nanoparticles (ENPs) have been widely developed in various fields in recent years, resulting in an increasing occurrence of nanoparticles in the natural environment. However, the tiny substances have created unexpected confusion in environmental sample testing due to the negative nanoeffect of ENPs. In this paper, a novel technique of spectrophotometric determination of p-nitrophenol (PNP) was developed under the interfering impact of nano-Fe(OH)₃, widely distributed in the natural environment as a typical example of ENPs. Because of the strong absorption at the two characteristic peaks of PNP, namely, 317 nm and 400 nm, nano-Fe(OH)₃ interfered with the colorimetric determination of PNP. Thus, the developed testing method, with HCl acidification at 60°C and ascorbic acid (AA) masking FeCl₃, was proposed and successfully realized the accurate determination of PNP in water samples by ultraviolet spectrophotometry with 317 nm as the absorption wavelength. The final colorimetric system of 5% HCl, 10% CH₃OH, and 1% ascorbic acid was confirmed by optimized batch experiments, and the optimum condition of acidification pretreatment was heating at 60°C for 20 min. Further results demonstrated that the proposed novel method had good accuracy and reproducibility even in high-salinity natural water bodies such as groundwater and surface water. The testing technique presented in this paper provided an interesting and useful tool for problem solving of PNP surveys under ENPs' interference and practically supported water quality assessment for a better environment.

Single source precursor synthesized CuS nanoparticles for NIR phototherapy of cancer and photodegradation of organic carcinogen

Herein, we report cost effective and body compatible CuS nanoparticles (NPs) derived from a single source precursor as photothermal agent for healing deep cancer and photocatalytic remediation of organic carcinogens. These NPs efficiently kill MCF7 cells (both in vivo and in vitro) under NIR irradiation by raising the temperature of tumor cells. Such materials can be used for the treatment of deep cancer as they can produce a heating effect using high wavelength and deeply penetrating NIR radiation. Furthermore, CuS NPs under solar light irradiation efficiently convert p-nitrophenol (PNP), an environmental carcinogen, to p-aminophenol (PAP) of pharmaceutical implication. In a nutshell, CuS can be used for the treatment of deep cancer and for the remediation of carcinogenic pollutants. There seems an intrinsic connection between the two functions of CuS NPs that need to be explored in length.

Boron nitride-palladium nanostructured catalyst: efficient reduction of nitrobenzene derivatives in water

Boron nitride (BN) supported palladium (Pd) nanostructured catalyst, as an alternative support for heterogeneous reduction of nitrobenzene derivatives, was prepared by a mild reduction of a Pd precursor in water. The structural characteristics and distribution of the synthesized Pd nanoparticles (NPs) on BN support were investigated by transmission electron microscopy, scanning transmission electron microscopy, energy-dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy methods. The potential and efficiency of the BN supported Pd NPs as an active and stable nanostructured catalyst were verified in the reduction of nitroaromatics. Excellent yields of the corresponding aryl amines in water were obtained and due discussion were included about the catalytic activity of the synthesized catalyst. It was also indicated that the nanostructured catalyst can be recycled at least for six consecutive cycles in the reduction of nitrobenzene, without losing significant activity.

Photoelectrocatalytic reduction of nitrobenzene on Bi-doped CuGaS2 films

Nitrobenzene, a toxic nitroaromatic, a feedstock compound to the production of many commercially relevant chemicals were photoelectrocatalytically reduced into aniline on a photoelectrode comprised by a bismuth-doped CuGaS₂ nanocrystallyne thin films on molybdenum. The activity of the photoelectrodes were compared to the reaction performed on undoped-CuGaS₂ films, and they were carried out under illumination with an applied bias potential at 0.9 V. Aniline was highly selectively obtained with 83% of conversion for reaction times of 100 min when using Bi-doped CuGaS₂, representing higher conversion of nitrobenzene and yield to aniline than the undoped photoelectrode. The catalytic performance of the doped films remained stable for a set of 5 consecutive experiments. These results indicate Bi-doped CuGaS₂ as a promising material to be applied in the photoelectrocatalytic reduction of nitrobenzene into aniline through the direct pathway mechanism, using solar light illumination.

Premagnetization enhancing the reactivity of Fe0/(passivated Fe0) system for high concentration p-nitrophenol removal in aqueous solution

In order to strengthen the treatment efficiency of Fe⁰ based system for high concentration wastewater treatment, Fe⁰ particles were passivated by concentrated nitric acid, and a premagnetization Fe⁰/(passivated Fe⁰) system was setup for high concentration p-nitrophenol (PNP) removal in this study. The significant parameters of this system were optimized. Under the optimal conditions, the premagnetization Fe⁰/(passivated Fe⁰) system could obtain high k_obs value for PNP removal (0.100 min^-1) and COD removal (15.0% after 60 min) for high concentration PNP (500 mg/L) treatment. In addition, five control experiments were set up to confirm the advantage of the premagnetization Fe⁰/(passivated Fe⁰) system. The results suggest that passivated Fe⁰ particles could be stimulated better than Fe⁰ particles by premagnetization process, and the premagnetization Fe⁰/(passivated Fe⁰) systems is much superior to the other five control systems. Furthermore, the pathway for PNP destruction treated by 6 different systems was also proposed according to intermediates determination by High Performance Liquid Chromatography (HPLC) and UV-vis spectrum, and the carbon mass balance was demonstrated according to the COD and HPLC analyses. Finally, the characteristics of (premagnetization) Fe⁰ and passivated Fe⁰ was detected by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) and vibrating sample magnetometer (VSM), and the mechanism of premagnetization effectively enhancing the reactivity of Fe⁰/(passivated Fe⁰) system (better than that of Fe⁰ system) was proposed. Consequently, the premagnetization for reactivity improvement of Fe⁰/(passivated Fe⁰) system is a promising technology to enhance the efficiency of this system for high concentration wastewater treatment.

Pyrochlore Ce2Zr2O7 decorated over rGO: a photocatalyst that proves to be efficient towards the reduction of 4-nitrophenol and degradation of ciprofloxacin under visible light

The synergistic interaction between phase pure Ce₂Zr₂O₇ and rGO enhances the photoreduction of 4-nitrophenol under visible light.