Polyoxometalate-cucurbituril molecular solid as photocatalyst for dye degradation under visible light

The Intrinsic Charge Carrier Behaviors and Applications of Polyoxometalate Clusters Based Materials

Polyoxometalates (POMs) are a series of molecular metal oxide clusters, which span the two domains of solutes and solid metal oxides. The unique characters of POMs in structure, geometry, and adjustable redox properties have attracted widespread attention in functional material synthesis, catalysis, electronic devices, and electrochemical energy storage and conversion. This review is focused on the links between the intrinsic charge carrier behaviors of POMs from a chemistry-oriented view and their recent ground-breaking developments in related areas. First, the advantageous charge transfer behaviors of POMs in molecular-level electronic devices are summarized. Solar-driven, thermal-driven, and electrochemical-driven charge carrier behaviors of POMs in energy generation, conversion and storage systems are also discussed. Finally, present challenges and fundamental insights are discussed as to the advanced design of functional systems based upon POM building blocks for their possible emerging application areas.

A novel electrochemical aptasensor for exosomes determination and release based on specific host-guest interactions between cucurbit [7]uril and ferrocene

The superior supramolecular recognition ability of macrocyclic compounds will enhance the sensitivity and selectivity of electrochemical detection, which has a great application potential in electrochemical sensing. Herein, we developed a novel electrochemical aptasensor based on the specific host-guest interactions between cucurbit [7]uril and ferrocene (Fc) for capture, determination and release of exosomes. Macrocyclic compounds, cucurbit [7]uril is modified on the surface of the gold nanoparticles composed electrode by self-assembling. CD63 aptamer linked ferrocene is introduced into this platform to capture exosomes specifically by CD63 protein on the exosomes. The dual specificity of macrocyclic compounds and aptamers enables highly selective and sensitive electrochemical detection of exosomes. The limit of detection (LOD) was 482 particles μL^-1. In addition, the captured exosomes could be released on demand in a very mild manner through aminoferrocene (NH₂-Fc) because of its higher affinity to cucurbit [7]uril. The proposed electrochemical aptasensor showed good performance in detecting exosomes even in plasma samples, thus demonstrating its great potential in early clinical diagnosis. Simultaneously, exosomes could be released undamaged by this protocol, exhibiting good applicability in comprehensive studies of exosomes. Moreover, this strategy can be applied to other target biomolecules by changing the recognition pairs.

New catalyst comprising Silicotungstic acid and MCM-22 for degradation of some organic dyes

A heterogeneous catalyst comprising Keggin type polyoxometalate, silicotungstic acid (SiW₁₂), and MCM-22 was synthesized using wet impregnation method and characterized by acidity measurement, BET, FT-IR, XRD, and SEM. Their catalytic activity was evaluated for the degradation of cationic organic dyes like methylene blue (MB), crystal violet (CV), and an azo dye Chryosidine Y (CY) in an aqueous solution. The experimental parameters such as catalyst amount, initial dye concentration, and contact time were studied for the degradation of dyes, and it was found that the cationic dyes like methylene blue and crystal violet show better activity as compared to azo dye Chryosidine Y. This may be attributed to better electrostatic interaction of these cationic dyes with the residual negative surface charge of the catalyst, due to presence of SiW₁₂ ion as it is rich in surface oxygens and surface hydroxyl groups. The control experimental results showed that the presence of SiW₁₂ at the surface of MCM-22 promoted the degradation reactions, and presence of multiple W-O bonds in polyoxometalate also played a key role in this reaction. The catalyst exhibits recycling ability without any significant loss in activity up to four cycles.

Preparation of polyoxometalate-doped aminosilane-modified silicate hybrid as a new barrier of chem-bio toxicant

Nanohybrid membranes based on the Keggin-type polyoxometalate (POM) H5PV2Mo10O40 and aminosilane-modified silicate (Ormosil and Ormosil(NR4+Cl-)) hybrids were synthesized as a new barrier to protect against simulants of chemical and biological toxicant. The 31P NMR and XPS results indicated that POM was bound to the Ormosil and Ormosil(NR4+Cl-) hybrids after impregnation. The antibacterial effects of the hybrids and hybrid-impregnated fabrics against Gram-negative and Gram-positive bacteria were investigated with zone of inhibition, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and plate-counting method. The MIC/MBC values of Ormosil(NR4+Cl-)/POM and Ormosil/POM against bacteria were 0.267/2.67 and 2.67/26.7, respectively, and the percentage reduction of bacteria was approximately 100% after 20 laundry cycles of their fabrics. The reaction products and mechanisms of the adsorptive degradation of 2-chloroethylethylsulfide (CEES) by hybrids were investigated with 13C NMR. The results of this study showed that POM-doped Ormosil systems are capable of destroying bacteria and CEES.

Gas-Phase Fragmentation of Host-Guest Complexes of Cyclodextrins and Polyoxometalates

Gas-phase fragmentation pathways of host-guest complexes of cyclodextrins (CDs) and polyoxometalates (POMs) were examined using collision-induced dissociation (CID). The host-guest complexes studied here were composed of two different classes of POMs-Keggin (PW₁₂O₄₀^3-) and Lindqvist (M₆O₁₉^2-, M = Mo, W)-and three types of CDs (α-, β-, and γ-CD) differing in the diameter of the inner cavity. The CD-POM complexes were generated either by mixing methanol solutions of POM and CD or through a one-step acidic condensation of tetraoxometalates MO₄^2- (M = Mo, W) with CDs for complexes with Keggin and Lindqvist anions, respectively, and introduced into the gas phase using electrospray ionization (ESI). We observe distinct differences in fragmentation pathways of the complexes of Keggin and Lindqvist POMs under high- and low-energy CID conditions. Specifically, direct dissociation and proton transfer from CD to POM accompanied by the separation of fragments is observed in CID of Keggin CD-POM complexes. In contrast, dissociation of CD complexes with Lindqvist POMs is dominated by the simultaneous loss of multiple water molecules. This unusual fragmentation channel is attributed to dissociation of the POM cluster inside the CD cavity accompanied by covalent bond formation between the fragments and CD and elimination of multiple water molecules. The observed covalent coupling of metal oxide clusters opens up opportunities for derivatization of macrocyclic host molecules using collisional excitation of gaseous non-covalent complexes.

The synthesis of CB[8]/ZnO composites materials with enhanced photocatalytic activities

Enhancing the separation of hole-electron pairs is one of the valid pathway to enhance the photocatalytic degradation performance of semiconductors. In this work, cucurbit[8]uril/zinc oxide (CB[8]/ZnO) composites were prepared. The structure, morphology, surface elements and optical properties of the composite are characterized by powder X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoemission spectroscopy, thermogravimetric analysis, and specific surface area measurements. In the photocatalytic degradation of 500 mg/L reactive brilliant red X-3B and 400 mg/L reactive yellow X-RG solutions, the rate constant of the CB[8]/ZnO composite is six times that of pure ZnO. A possible photocatalytic degradation mechanism is proposed. Zn²⁺ ions chelate with the carbonyl group of CB[8] on the surface of CB[8]/ZnO. Under ultraviolet-visible light irradiation, the generated holes of ZnO are transferred to and trapped on the CB[8] units to facilitate the separation of electron-hole pairs, improving the photocatalytic performance of this system.

Coagulation performance of cucurbit[8]uril for the removal of azo dyes: effect of solution chemistry and coagulant dose

Dye wastewater has attracted significant attention because of its wide pH range and high content of color. In this work, the coagulation performances of cucurbit[8]uril for the removal of color from acid red 1 (AR1), orange II (OII), and Congo red (CR) dye wastewaters were investigated. Experimental results showed that color removal rates of greater than 95% for AR1, OII and CR were achieved at pH 6.0, when the dosage of cucurbit[8]uril was 1.51, 3.01 and 0.38 mmol·L^-1, respectively. Under identical conditions, the color removal efficiencies of AR1 and CR were higher than OII, due to the larger molecular weights and more active hydroxyl and amino groups. Moreover, steady increases in AR1, OII and CR removal rates were recorded with increasing ionic strength. Such increases may be related to the reduction in thickness of the surface solvent membrane surrounding the dye colloids at high ionic strengths. Furthermore, Fourier transform infrared spectra demonstrated that no new bonds or functional groups were formed during coagulation, which indicates that the removal of AR1, OII and CR was primarily a physical process. The hydrogen bonds and inclusion complexes formed between cucurbit[8]uril and AR1, OII and CR contributed to the removal of color in coagulation predominantly.

Self-Assembly in Polyoxometalate and Metal Coordination-Based Systems: Synthetic Approaches and Developments

Utilizing new experimental approaches and gradual understanding of the underlying chemical processes has led to advances in the self-assembly of inorganic and metal–organic compounds at a very fast pace over the last decades. Exploitation of unveiled information originating from initial experimental observations has sparked the development of new families of compounds with unique structural characteristics and functionalities. The main source of inspiration for numerous research groups originated from the implementation of the design element along with the discovery of new chemical components which can self-assemble into complex structures with wide range of sizes, topologies and functionalities. Not only do self-assembled inorganic and metal–organic chemical systems belong to families of compounds with configurable structures, but also have a vast array of physical properties which reflect the chemical information stored in the various “modular” molecular subunits. The purpose of this short review article is not the exhaustive discussion of the broad field of inorganic and metal–organic chemical systems, but the discussion of some representative examples from each category which demonstrate the implementation of new synthetic approaches and design principles.

A robust polyoxometalate-templated four-fold interpenetrating metal–organic framework showing efficient organic dye photodegradation in various pH aqueous solutions

A polyoxometalate-templated four-fold interpenetrating 3-D MOF of 1 acts as a photocatalyst, which can efficiently degrade the organic dyes under UV-Vis light irradiation in aqueous solutions over a wide pH range.