Green synthesis of biomass-derived carbon quantum dots as fluorescent probe for Fe3+ detection

Application of biomass carbon dots in food packaging

Since its discovery, carbon quantum dots (CDs) have been widely applied in cell imaging, drug delivery, biosensing, and photocatalysis due to their excellent water solubility, chemical stability, fluorescence stability biocompatibility, low toxicity, and preparation cost. However, the low fluorescence yield and poor surface structure limit the application of CDs. Heteroatom doping is considered an ideal method to improve CDs' optical and electrical properties. From this perspective, eco-friendly biomass and its derivatives are perfect carbon precursors for CDs because they contain the heteroatoms needed to modify CDs, and their complex chemical composition gives CDs a wide variety of surface functional groups. Besides, converting biomass waste into high-value-added CDs is also an innovation in biomass waste treatment. Therefore, this paper focuses on the carbon precursors of biomass CDs. At the same time, food packaging occupies an essential position in the industry, and fluorescent CDs with good fluorescence properties, high chemical stability, and good photobleaching properties have great application potential in packaging innovation techniques that have emerged in recent years, but relevant reports are scarce and scattered. Considering that the surface morphology, chemical structure, and optical and electrical properties of biomass CDs are primarily affected by the carbon precursors' chemical structure and preparation method, this paper also focuses on the synthesis method of biomass CDs and its application in anti-counterfeiting packaging, intelligent packaging, antioxidant packaging, and antibacterial packaging.

Antimicrobial and Remineralization of Carboxymethyl Chitosan and Xylitol Functionalized Carbon Dots Coating on Orthodontic Brackets

Purpose

During fixed orthodontic treatment, oral hygiene is difficult to ensure and can easily lead to an imbalance in the oral micro-ecological balance. In this study, based on the adhesive properties of polydopamine (PDA) and the good antimicrobial and remineralization properties of carboxymethyl chitosan (CMC) and xylitol (Xy), new nanocomposites with both antimicrobial and remineralization capabilities were prepared to coat on orthodontic brackets.

Methods

Composite carbon dots (CDs) were synthesized using carboxymethyl chitosan and xylitol, we characterized them and the antimicrobial properties of the CMC-Xy-CDs were investigated by co-cultivation with S. mutans in vitro and in vivo. The composite coating was then adhered to the brackets. After the characterization measurements, antibacterial properties against S. mutans and the ability to promote remineralization of isolated teeth were investigated.

Results

Biological studies demonstrated that L929 cells co-cultured with CMC-Xy-CDs did not observe significant cytotoxicity and CMC-Xy-CDs have good biocompatibility. In the adhesive action of PDA, various characterizations have proved that CDs are modified on the brackets surface. In the antibacterial experiment, CMC-Xy-CDs and the adhesive coating on the brackets were found to have better antibacterial performance than the control group, with an antibacterial rate of up to 80%. In the animal experiment, the results of CMC-Xy-CDs promoting the healing of S. mutans infection wound models showed that there was a significant difference at 7d (P < 0.001), indicating that the experimental group had good antibacterial effects. The SEM of teeth after CMC-Xy-CDs promoted remineralization showed that the structure of the tooth surface became dense and some precipitation appeared, and the surface hardness measurement was significantly increased (p<0.0001).

Conclusion

Our study revealed that new nanocomposites with both antimicrobial and remineralization capabilities coated on orthodontic brackets provide a good basis for future clinical applications.

The impact of carbon quantum dots derived from spent coffee grounds on the droplet combustion of diesel/n-butanol blend

As global concerns surrounding climate change mount and fossil fuel reserves diminish, the application of additives in internal combustion engines is increasingly prevalent. Butanol and carbonaceous nanomaterials, such as carbon quantum dots (CQD), are being employed as additives to increase engine efficiency and mitigate the emission of pollutants. Nevertheless, understanding the impact of these additives on combustion behavior at the droplet scale through combustion assessments before their use in engines is crucial. In this study, our main objective was to assess the impact of incorporating CQD dispersed in n-butanol as additives to conventional diesel fuel on the combustion characteristics at the droplet scale. CQD were obtained from spent coffee grounds (SCGs) using n-butanol as a solvent. The product obtained was mixed with Colombian commercial diesel (10 % vol. palm oil biodiesel), and its combustion was evaluated using the droplet combustion method. Before the CQD synthesis, SCGs were characterized by thermogravimetric analysis (TGA) and field emission scanning electron microscopy (FESEM). CQD were characterized via Fourier transform infrared (FTIR) spectroscopy, Transmission Electron Microscopy (TEM), UV-vis, and fluorescence spectroscopy. Results indicated that adding n-butanol and CQD to commercial diesel leads to a 5.4 % and 16.5 % increase in droplet ignition delay, respectively. These additives also cause droplet contraction and expansion cycles, resulting in unstable combustion. However, CQD reduces the frequency of microexplosions caused by boiling n-butanol inside the droplet, which mitigates instabilities during droplet combustion. Including CQD can enhance fuel evaporation by increasing the density of nucleation sites for bubble formation and preventing micro-explosions, thereby leading to stable combustion. These attributes can significantly influence the performance of blends in Compression Ignition (CI) Engines.

Functional composite films incorporating triphala-derived carbon dots for extending chicken preservation

Triphala-based carbon dots (T-CDs) were successfully prepared using a simple one-step hydrothermal method. T-CDs were characterized by absorbance, fluorescence, Fourier-transform infrared, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. T-CDs showed bright blue fluorescence at 434 nm upon excitation at 360 nm. Functional composite films were prepared using poly(vinyl alcohol) and gelatin mixture by incorporating T-CDs and applied as a packaging film to extend the shelf life of chicken. The antibacterial activity of T-CDs against Listeria monocytogenes and Staphylococcus aureus was evaluated using well diffusion and colony count methods. T-CDs were evenly dispersed throughout the PVA/Gel solution to form a dense and uninterrupted film. They also formed strong bonds with polymer chains, which improved the tensile strength of the film from 32.44 to 42.70 MPa. Furthermore, the presence of T-CDs significantly enhanced the UV-blocking ability of the PVA/Gel films, achieving 99.7 % for UV-B and 97.2 % for UV-A. In addition, the PVA/Gel/T-CDs composite films showed excellent antioxidant, antimicrobial and UV-barrier properties, extending the shelf life of chicken. Therefore, the PVA/Gel/T-CDs composite films showed great potential as an active food packaging material to extend the shelf life and preserve the visual quality of packaged meat.

Biophysical translational posterity of green carbon quantum dots: the unparalleled versatility

Carbon dots (CQDs), zero-dimensional carbon nanostructures, have attracted considerable interest among researchers due to their versatile applications. CQDs exhibit exceptional photoluminescent properties and high quantum yield, making them ideal candidates for bioimaging, drug delivery and environmental sensing. Their biocompatibility and tunable surface chemistry enable targeted therapeutic delivery and real-time imaging with minimal toxicity. Additionally, CQDs are emerging as promising materials in optoelectronics, offering sustainable alternatives in light-emitting diodes and solar cells. This review underscores the unparalleled adaptability of green CQDs in bridging the gap between laboratory research and practical applications, paving the way for innovative solutions in healthcare and environmental monitoring. Through comprehensive analysis, it advances the understanding of CQDs, positioning them at the forefront of next-generation nanomaterials with significant translational impact.

Recent advances in waste-derived carbon dots and their nanocomposites for environmental remediation and biological applications

The surging demand for eco-friendly nanomaterial synthesis has spurred the emergence of green approaches for synthesizing carbon dots (CDs). These methods utilized natural carbon sources, such as different kind of waste for CDs synthesis, underscoring their significance in waste management and circular economy initiatives. Furthermore, the properties of CDs can be tailored by their functionalization with different materials, enabling their versatile utilization in diverse scientific domains. In this regard, the current study delves into an in-depth review of recent advances in the green/sustainable fabrication of carbon dots nanocomposites (CDNCs) with metal/metal oxides and polymers within the timeframe of 2019-2023. It begins by categorizing different types of CDs, analyzing their associated nanocomposites with mechanistic insights. The primary focus is on green synthesis methods, particularly those that employ waste materials. Furthermore, we also discussed the applications of these CDs in both environmental and biological fields by covering areas such as catalysis, photocatalysis, heavy metal ion sensing, antimicrobial, and bioimaging with in-depth underlying mechanisms. At last, the review highlights the significant challenges with future directions. These include the pursuit of cost-effective green precursors, the advancement of streamlined one-step synthesis techniques, and their efficient utilization for diverse applications. Therefore, this review provides valuable insights for researchers seeking to enhance the functionality and sustainability of CDNCs by highlighting their potential to address environmental and biological challenges.

N-Doping CQDs as an Efficient Fluorescence Probe Based on Dynamic Quenching for Determination of Copper Ions and Alcohol Sensing in Baijiu

To address an accurate detection of heavy metal ions in Baijiu production, a nitrogen-doping carbon quantum dots (N-CQDs) was prepared by hydrothermal method from citric acid and urea. The as-prepared N-CQDs had an average particle size of 2.74 nm, and a large number of functional groups (amino, carbonyl group, etc.) attached on its surface, which obtained a 9.6% of quantum yield (QY) with relatively high and stable fluorescence performance. As a fluorescent sensor, the fluorescence of N-CQDs at 380 nm excitation wavelength could be quenched quantitatively by adding Cu2+, due to the dynamic quenching of electron transfer caused by the binding of amine groups and Cu2+, which showed excellent sensitivity and selectivity to Cu2+ in the range of 0.5-5 μM with a detection limit (LOD) of 0.032 μM. In addition, the N-CQDs as well as could be applied to quantitative determine alcohol content in the range of 10-80 V/V% depending on the fluorescence enhancement. Upon the experiment, the fluorescent mechanism was studied by Molecular dynamics (MD) simulations, which demonstrated that solvent effect played an influential role on sensing alcohol content in Baijiu. Overall, the work provided a theoretically guide for the design of fluorescence sensors to monitor heavy metal ion in liquid drinks and sense alcohol content.

A Dual-Mode Detection Sensor Based on Nitrogen-Doped Carbon Dots for Visual Detection of Fe(III) and Ascorbic Acid via a Smartphone

Accurately and promptly detecting Fe3+ and ascorbic acid (AA) is a crucial objective. In this study, nitrogen-doped carbon dots (N-CDs) were synthesized using a one-step hydrothermal synthesis method with 6,9-diamino-2-ethoxyacridine lactate as the precursor. The introduction of Fe3+ and AA resulted in both fluorescence (FL) quenching and enhancement of the synthesized N-CDs. The fluorescent response of the N-CDs probe to Fe3+ was observed in the concentration range of 5-20 µM and 25-50 µM, with a limit of detection (LOD) of 290 nM. Remarkably, the fluorescence of the N-CDs was recovered upon the addition of AA to the N-CDs-Fe3+ system. Using the "off-on" fluorescent N-CDs probe, a linear range of 40-90 µM was achieved with an LOD of 0.69 µM. Additionally, the feasibility of employing a smartphone equipped with an RGB Color Picker was demonstrated for the analysis of Fe3+ and AA concentrations, providing a novel visual detection method. Furthermore, the application of N-CDs in solution demonstrated considerable potential for visually detecting Fe3+ and AA. The proposed dual-mode detection sensor was found to be simple, efficient, and stable, enabling the successful determination of Fe3+ and AA in practical samples with satisfactory results.

Green synthesis of carbon dots from fish scales for selective turn off-on detection of glutathione

Carbon dots as fluorescent probes were fabricated using readily available grass carp fish scales as the carbon source via one-step synthesis based on a pyrolytic reaction. The as-prepared grass carp fish scale carbon dots (GF-CDs) exhibited good biocompatibility and excellent optical properties with a high fluorescence quantum yield of 23.8%. Glutathione (GSH) is an essential small tri-peptide molecule present in every body cell and plays a crucial role in vivo and performs a wide range of biological functions. Ag+ can effectively quench the fluorescence of GF-CDs because of the electron transfer between GF-CDs and Ag+; however, the addition of GSH can significantly increase GF-CD-Ag+ fluorescence. Because of their combination with Ag+ and GSH, GF-CDs show selective fluorescence recovery. GF-CDs can serve as fluorescent probes for GSH detection. This detection method covered a wide linear range (1.6-36.0 μg mL-1) with the lowest detection limit of 0.77 μg mL-1 and manifested great advantages such as a short analysis time, good stability, repeatability, and ease of operation.

Synthesis of multicolor luminescent carbon dots based on carboxymethyl chitosan for cell imaging and wound healing application: In vitro and in vivo studies

The construction of biomaterials that can facilitate wound healing is significantly challenging in the medical field, and bacterial infections increase this complexity. In this study, we selected the biomacromolecule carboxymethyl chitosan as a carbon source and citric acid as an auxiliary carbon source. We prepared carbon quantum dots with multicolor luminescence properties and higher quantum yields (QYs) using a facile one-pot hydrothermal method. We characterized them to select carbon dots (CDs) suitable for cell growth. Subsequently, their biocompatibility with L929 cells, antibacterial properties against Staphylococcus aureus, and efficiency in promoting wound healing in vivo were investigated. Our experimental results showed that CDs at an appropriate concentration had excellent bioimaging ability, were suitable for cell growth, and accelerated the healing of infected wounds. We believe these bioactive CDs have great potential in promoting wound healing.

Biomass derived green carbon dots for sensing applications of effective detection of metallic contaminants in the environment

The rapid consumption of metals and unorganized disposal have led to unprecedented increases in heavy metal ion concentrations in the ecosystem, which disrupts environmental homeostasis and results in agricultural biodiversity loss. Mitigation and remediation plans for heavy metal pollution are largely dependent on the discovery of cost-effective, biocompatible, specific, and robust detectors because conventional methods involve sophisticated electronics and sample preparation procedures. Carbon dots (CDs) have gained significant importance in sensing applications related to environmental sustainability. Fluorescence sensor applications have been enhanced by their distinctive spectral properties and the potential for developing efficient photonic devices. With the recent development of biomass-functionalized carbon dots, a wide spectrum of multivalent and bivalent transition metal ions responsible for water quality degradation can be detected with high efficiency and minimal toxicity. This review explores the various methods of manufacturing carbon dots and the biochemical mechanisms involved in metal detection using green carbon dots for sensing applications involving Cu (II), Fe (III), Hg (II), and Cr (VI) ions in aqueous systems. A detailed discussion of practical challenges and future recommendations is presented to identify feasible design routes.

Low Cu(II) Concentration Detection Based on Fluorescent Detector Made from Citric Acid and Urea

Carbon quantum dots (CQD) are an advanced fluorescent material, which has attracted more and more attention in theoretical research and practical applications. To obtain stable CQDs with high fluorescence characteristics for detecting trace metal ions in water, nitrogen-doped carbon quantum dots (N-CQDs) based fluorescent sensors were synthesized by the hydrothermal method, using citric acid and urea as source. Transmission electron microscopy (TEM) images showed that the synthesized N-CQDs maintained a narrow particle size distribution bellow 10 nm, and its average size was 3.07 nm. Fourier transform infrared spectroscopy (FT-IR) indicated that abundant hydroxyl and carboxyl functional groups existed on N-CQDs surface, which helped N-CQDs highly disperse in water. In addition, UV-vis spectroscopy and photoluminescence demonstrated that the N-CQDs obtained a 10.27% of quantum yield (QY) with relatively high and stable fluorescence performance. As a fluorescent sensor, the N-CQDs showed a fluorescence "ON-OFF" mechanism during the Cu2+ detection, which was induced from the electrons transition in surface functional groups. The final N-CQDs exhibited a wide linear relationship between fluorescence response and concentration of Cu2+ in range of 0.3-0.7 μM with a detection limit of 0.071 μM. Furthermore, the detection of Cu2+ in the simulating surface water (by adding interfering metal ions in purified water) and the tap water (from municipal water in Beijing) were used to verify N-CQDs practical application.

Dual metal ion (Fe3+ and As3+) sensing and cell bioimaging using fluorescent carbon quantum dots synthesised from Cynodon dactylon

In this study, water dispersible fluorescent carbon quantum dot (CQD) has been synthesised, having an average size of 8.6 ± 0.4 nm using Cynodon dactylon (CD) following microwave assisted green synthetic one-step method. As-prepared CQD fluoresces strongly at 444 nm having a quantum yield of 1% in water when excited at 350 nm. This fluorescence of CQD is sensitive toward As3+ and Fe3+ metal ions. These CQD are utilized for dual metal ion fluorescence sensing; turn-on fluorescence sensing for As3+ and turn-off fluorescence sensing for Fe3+ ions. Limit of detection for As3+ and Fe3+ ions has been found to be 19 nM and 0.10 μM respectively, which is the lowest value reported for As3+ without any functionalization. The adsorption kinetics of As3+ and Fe3+ ions on CQD have been examined using pseudo-first-order-kinetic model revealing that physical adsorption is dominant over chemical processes in this work. For 0.41 g/L and 1.90 g/L dose of CQD, the equilibrium adsorption capacity was found to be 1.57 × 10-6 mg/g, 2.91 × 10-7 mg/g, and 1.01 × 10-5 mg/g, 1.69 × 10-6 mg/g respectively for As3+ and Fe3+ ions. Despite having low quantum yield in water, as-prepared CQD showed low cytotoxicity and good tolerance against photodegradation of biological cells at concentrations lower than 62.5 μg/mL and when the cells are illuminated up to 12 h. Owing to this, the synthesised CQD have been utilized as fluorescent probes for in itro cell imaging.

Biomass-Derived Carbon Dots as Nanoprobes for Smartphone-Paper-Based Assay of Iron and Bioimaging Application

A facile one-step carbonization approach is reported herein for the sustainable hydrothermal synthesis of fluorescent blue nitrogen-doped carbon quantum dots (NCQDs) using banana petioles obtained as biomass waste. These NCQDs were used to design a "turn-off" fluorescent probe, which exhibited excellent sensing capability toward the selective detection of micronutrient, Fe3+ ion, with a limit of detection (LOD) of 0.21 nM. The turn-off process involves the formation of a nonradiative charge transfer complex via a photoinduced electron transfer process. The sensor showed a linear range from 5 to 200 nM and was used for the estimation of Fe3+ ions in real plant samples. Further, a paper-based assay was developed for the quantitative estimation of Fe3+ with LOD values of 0.47 nM for solution-based assay and 0.94 nM for paper-based assay using a smartphone-based readout for potential on-field applications in precision agriculture. Bioimaging studies on banana leaf cells using NCQDs revealed the selective staining of stomata openings on leaf lamella. Therefore, this work provides a way for the valorization of biomass waste into functional nanomaterials without using any extra chemicals.

Natural Nitrogen-Doped Carbon Dots Obtained from Hydrothermal Carbonization of Chebulic Myrobalan and Their Sensing Ability toward Heavy Metal Ions

Chebulic Myrobalan is the main ingredient in the Ayurvedic formulation Triphala, which is used for kidney and liver dysfunctions. Herein, natural nitrogen-doped carbon dots (NN-CDs) were prepared from the hydrothermal carbonization of Chebulic Myrobalan and were demonstrated to sense heavy metal ions in an aqueous medium. Briefly, the NN-CDs were developed from Chebulic Myrobalan by a single-step hydrothermal carbonization approach under a mild temperature (200 °C) without any capping and passivation agents. They were then thoroughly characterized to confirm their structural and optical properties. The resulting NN-CDs had small particles (average diameter: 2.5 ± 0.5 nm) with a narrow size distribution (1-4 nm) and a relatable degree of graphitization. They possessed bright and durable fluorescence with excitation-dependent emission behaviors. Further, the as-synthesized NN-CDs were a good fluorometric sensor for the detection of heavy metal ions in an aqueous medium. The NN-CDs showed sensitive and selective sensing platforms for Fe3+ ions; the detection limit was calculated to be 0.86 μM in the dynamic range of 5-25 μM of the ferric (Fe3+) ion concentration. Moreover, these NN-CDs could expand their application as a potential candidate for biomedical applications and offer a new method of hydrothermally carbonizing waste biomass.

Recent advances in green carbon dots (2015-2022): synthesis, metal ion sensing, and biological applications

Carbon dots (CDs) show extensive potential in various fields such as sensing, bioimaging, catalysis, medicine, optoelectronics, and drug delivery due to their unique properties, that is, low cytotoxicity, cytocompatibility, water-solubility, multicolor wavelength tuned emission, photo-stability, easy modification, strong chemical inertness, etc. This review article especially focuses on the recent advancement (2015-2022) in the green synthesis of CDs, their application in metal ions sensing and microbial bioimaging, detection, and viability studies as well as their applications in pathogenic control and plant growth promotion.

A Hydrothermal Method to Generate Carbon Quantum Dots from Waste Bones and Their Detection of Laundry Powder

Surfactants are one of the major pollutants in laundry powder, which have an impact on the environment and human health. Carbon quantum dots (CQDs) are spherical zero-dimensional fluorescent nanoparticles with great potential for fluorescent probing, electrochemical biosensing and ion sensing. Herein, a bottom-up approach was developed for the synthesis of CQDs from biomass to detect laundry detergent and laundry powder. Waste chicken bones were used as carbon precursors after being dried, crushed and reacted with pure water at 180 °C for 4 h to generate CQDs, which exhibited a monodisperse quasi-spherical structure with an average particle size of 3.2 ± 0.2 nm. Functional groups, including -OH, C=O, C=C and C-O, were identified on the surface of the prepared CQDs. The optimal fluorescence excitation wavelength of the yellow-brown CQDs was 380 nm, with a corresponding emission peak at 465 nm. CQDs did not significantly increase cell death in multiple cell lines at concentrations of 200 µg·mL⁻¹. Fluorescence enhancement of CQDs was observed after addition of sodium dodecyl benzene sulphonate, a major anionic surfactant in laundry powder. A linear relationship between fluorescence enhancement CQDs and the concentration of laundry powder was established. Thus, a hydrothermal method was developed to generate CQDs from waste biomass that may be used as a fluorescent probe to detect laundry powder.

Biobased carbon dots production via hydrothermal conversion of microalgae Chlorella pyrenoidosa

A promising green hydrothermal process was used to produce biobased nanomaterials carbon dots (CDs) by using microalgae Chlorella pyrenoidosa (CP) and its main model compounds (i.e., glucose, glycine, and octadecanoic acid). The possible reaction pathway including hydrolysis, Amadori rearrangement, cyclization/aromatization, and polymerization was first proposed for the hydrothermal process to produce microalgae-based CDs. Interactions among carbohydrates and proteins in microalgae were vital intermediate reactions in the generation of CDs. The mass yield of CDs reached 7.2% when the CP was hydrothermally treated with 20:1 of liquid-to-solid ratio at 230 °C for 6 h. It was confirmed that nitrogen, sulfur, phosphorous, and potassium were doped onto CP-based CDs (CD-CP) successfully without additional reagents or treatments. The CD-CP yield was 4.0-24.3 times higher than that of model compound-based CDs. Regarding morphology, CD-CP was constituted by many spherical nanoparticles smaller than 20 nm. These CDs emitted blue fluorescence under ultraviolet light, and the fluorescence quantum yield of CD-CP was 4.7-9.4 times higher than that of CP model compound-based CDs. Last, CD-CP displayed broad application prospects as a sensor for Fe³⁺ detection in wastewater with high sensitivity.

Carbon Functionalized Material Derived from Byproduct of Plasma Tar-Cracking Unit on Biomass Gasifier Collected Using Standard Impinger Method

Reduction of tar concentration in biomass gasification with secondary plasma tar cracking unit remains a challenge to meet the requirement for clean syngas energy applications. Typically, the post-treatment of syngas to reduce the tar from an updraft fixed-bed reactor is using secondary plasma tar cracking unit. In this study, an additional trapping train was introduced as a mechanism to harvest byproducts of the tar decomposition process (byproduct carbon functionalized material or BCFM). The measurement in gravimetric and particle size distribution, supported by photoluminescent (PL) and Fourier transform infrared spectroscopy (FT–IR) of BCFM, were conducted to reveal the BCFM characteristic. The gravimetric analysis showed that the application of the secondary plasma tar cracking unit highly reduced the tar concentration. Similarly, the average particle size also decreased significantly. The peak emission spectra of the suspended BCFM particle under the plasma cracking treatment shifted from around 500 nm to around 400 nm. The significant changes in the BCFM functional group occurred due to the successful cracking process. It was concluded that the byproduct received from the plasma cracking process resulted in very low tar content and was revealed to be a carbon functionalized material with a very small size (16.2 nm) and stable suspension.

Green synthesis of carbon quantum dots and their environmental applications

Green synthesis of scalable, high-quality, fluorescent carbon quantum dots (CQDs) from natural biomass remains attractive due to their outstanding environmental application. CQDs are an emerging class of zero-dimensional carbon nanomaterials (<10 nm) that have recently attracted much attention due to their strong optical properties, biocompatibility, nontoxicity, uniform particle size, high photostability, low-cost synthesis, and highly tunable photoluminescence. The unique properties of CQDs possess a broad range of prospective applications in a number of fields such as metal ions detection, photocatalysis, sensing, medical diagnosis, bioimaging, and drug delivery. CQD nanostructures are synthesized using various techniques such as hydrothermal method, laser ablation, microwave irradiation, electrochemical oxidation, reflux method, and ultrasonication. However, this type of fabrication approach requires several chemical reactions including oxidation, carbonization, and pyrolysis. Green synthesis of CQDs has several advantages such as the use of low-cost and non-toxic raw materials, renewable resources, simple operations, and being environment-friendly. This review article will discuss the physicochemical properties of CQDs techniques used in the production of CQDs, and the stability of CQDs along with their applications in wastewater treatment and biomedical fields.

Direct and Sensitive Detection of Dopamine Using Carbon Quantum Dots Based Refractive Index Surface Plasmon Resonance Sensor

Abnormality of dopamine (DA), a vital neurotransmitter in the brain’s neuronal pathways, causes several neurological diseases. Rapid and sensitive sensors for DA detection are required for early diagnosis of such disorders. Herein, a carbon quantum dot (CQD)-based refractive index surface plasmon resonance (SPR) sensor was designed. The sensor performance was evaluated for various concentrations of DA. Increasing DA levels yielded blue-shifted SPR dips. The experimental findings revealed an excellent sensitivity response of 0.138°/pM in a linear range from 0.001 to 100 pM and a high binding affinity of 6.234 TM⁻¹. The effects of varied concentrations of DA on the optical characteristics of CQD thin film were further proved theoretically. Increased DA levels decreased the thickness and real part of the refractive index of CQD film, according to fitting results. Furthermore, the observed reduction in surface roughness using AFM demonstrated that DA was bound to the sensor layer. This, in turn, explained the blue shift in SPR reflectance curves. This optical sensor offers great potential as a trustworthy solution for direct measurement due to its simple construction, high sensitivity, and other sensing features.

A Review on the Use of Biochar Derived Carbon Quantum Dots Production for Sensing Applications

Since their discovery, carbon dots have attracted a great deal of interest for their perspective biological applications. Nevertheless, the quenching of carbon dots photoluminescence represents an interesting feature for quantitative analysis in very low concentration of many species. A particular approach for the production of carbon dots is the use of biochar, a carbonized biomass, as a precursor. In this work, we overview the main achievements accomplished by using biochar-derived carbon dots for detecting and quantifying inorganic and organic species. We also provide background knowledge of the main properties, production and purification routes of carbon dots.

Heavy metal ion detection using green precursor derived carbon dots

The discovery of carbon dots (CDs) for environmental remediation has gained awareness because of the diverse economically viable and environmental friendly green precursors generated from biowastes and biomass compared to the toxic inorganic quantum dots and CDs prepared from chemical precursors. This review presents the recent progress in green CDs, including their synthesis methods and sensing applications for the detection of heavy metal ions such as Iron (III), Mercury (II), Copper (II), Chromium (VI), Lead (II), Arsenic (III), Cobalt (II), Aluminum (III), Silver (I), and Gold (III) which are prominent environmental pollutants. The comparison based on selectivity, sensitivity, quantum yield, detection limit, linear concentration range, and sensing mechanisms are also reported. This review also covers the performance of doped green CDs using heteroatoms, toward the detection of heavy metal ions. Apart from the future perspectives, this review provides a general guide to use such environmental friendly CDs to detect harmful pollutants.

Rhodamine-based chemosensor for Sn2+ detection and its application in nanofibrous film and bioimaging

A simple rhodamine-based compound CK was designed and synthesized as a fluorescent chemosensor for Sn²⁺ based on Sn²⁺-mediated cyclization. The optical investigation indicated that the probe could quantitatively detect Sn²⁺ in a concentration range of 10-30 μM, with a detection limit of 118 nM. Moreover, probe CK, with low cytotoxicity, was successfully applied for imaging of Sn²⁺ in HeLa cells and mice, exhibiting excellent biocompatibility and cell membrane permeability. For on-site monitoring, CK-hybridized polymethyl methacrylate (PMMA) nanofibers were prepared by electrospinning and successfully employed for the visual detection of Sn²⁺ in actual samples. All the results demonstrated that the chemosensor could be a promising tool for the detection of Sn²⁺ in vitro and in vivo.

A novel dual-capability naphthalimide-based fluorescent probe for Fe3+ ion detection and lysosomal tracking in living cells

We design and synthesize a novel 1,8-naphthalimide-based fluorescent probe MNP that features the dual capabilities of tracking lysosomes in living HeLa cells and sensitively detecting Fe³⁺ ions in aqueous solution. The MNP is obtained by modifying the morpholine group with a lysosomal targeting function and the piperazine group with an Fe³⁺ ion recognition function on the 1,8-naphthalimide matrix. In the presence of Fe³⁺ ions, the MNP acts as a recognition ligand to coordinate with the central Fe³⁺ ion, and the protonated [MNPH]⁺ is eventually generated, in which significant fluorescence enhancements are observed due to the intramolecular photo-induced electron transfer (PET) process being blocked. The limit of detection of Fe³⁺ ions is as low as 65.2 nM. A cell imaging experiment shows that the MNP has low cytotoxicity and excellent lysosomal targeting ability. Therefore, the MNP offers a promising tool for lysosomal tracking and relevant life process research.

A newly prepared 1,8-naphthalimide-based fluorescent probe, MNP, allows the detection of Fe³⁺ ions in aqueous medium and lysosomal tracking in living cells. MNP was used in situ for the imaging of lysosomes in HeLa cells, a new strategy for lysosome-related medical diagnosis.

Leftover Kiwi Fruit Peel-Derived Carbon Dots as a Highly Selective Fluorescent Sensor for Detection of Ferric Ion

Recently, the use of natural products for the synthesis of carbon dots (CDs) has received much attention. Herein, leftover kiwi (Actinidia Deliciosa) fruit peels were successfully turned into beneficial fluorescent carbon dots (KN-CDs) via the hydrothermal-carbonization route. KN-CDs 1 and KN-CDs 2 were prepared without and with ammonium hydroxide, respectively. KN-CDs 1 and KN-CDs 2 were systematically characterized by various analytical techniques. Synthesized KN-CDs showed spherical-shaped morphology with narrow size distribution and excellent optical properties with excitation-independent behaviors. The quantum yields of KN-CDs 1 and KN-CDs 2 were calculated as 14 and 19%, respectively. Additionally, the KN-CDs possess excellent prolonging and photostability. Because of the excellent optical properties of KN-CDs, they were utilized as fluorescent sensors. The strong fluorescence of the KN-CDs was selectively quenched by Fe3+ ion, and quenching behavior showed a linear correlation with the concentrations of Fe3+ ion. KN-CDs 1 and KN-CDs 2 showed the detection of Fe3+ ions within the concentration range of 5–25 µM with the detection limit of 0.95 and 0.85 µM, respectively. Based on the turn-off sensing by the detection of Fe3+ ions, KN-CDs would be a promising candidate as a selective and sensitive fluorescent sensor.