Simple preparation of g-C3N4@Ni3C nanosheets and its application in supercapacitor electrode materials, hydrogengeneration via NaBH4 hydrolysis and reduction of p–nitrophenol

High entropy alloying strategy for accomplishing quintuple-nanoparticles grafted carbon towards exceptional high-performance overall seawater splitting

High entropy alloys (HEAs), a novel class of material, have been explored in terms of their excellent mechanical properties. Seawater electrolysis is a step towards sustainable production of carbon-neutral fuels such as H2, O2, and industrially demanding Cl2. Herein, we report a practically viable FeCoNiMnCr HEA nanoparticles system grafted on a conductive carbon matrix for promising seawater electrolysis. The comprehensive kinetics analysis of the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and chlorine evolution reaction (CER) confirms the effectiveness of our system. As an electrocatalyst, HEAs grafted on carbon black show trifunctionality with promising kinetics, selectivity and enduring performance, towards seawater splitting. We optimize high entropy alloy decorated/grafted carbon black (HEACB) catalysts, studying their synthesis temperature to scrutinize the effect of alloy formation variation on the catalysis efficacy. During the catalysis, selectivity between two mutually competing reactions, CER and OER, in the electrochemical catalysis of seawater is controlled by the reaction media pH. We employ Mott-Schottky measurements to probe the band structure of the intrinsically induced metal-semiconductor junction in the HEACB catalyst, where the carrier density and flat band potential are optimized. The HEACB sample provides promising results towards overall seawater electrolysis with a net half-cell potential of about 1.65 V with good stability, which strongly implies its broad practical applicability.

Intimate coupling of gC3N4/CdS semiconductor on eco-friendly biocarrier loofah sponge for enhanced detoxification of ciprofloxacin

Ciprofloxacin is one of the antibiotics predominantly used to treat bacterial infections, however excess usage, and release of antibiotic from various sources to the environment can cause severe risks to human health since it was considered as emerging pollutant. This study deals with the intimately coupled photocatalysis and biodegradation (ICPB) of ciprofloxacin using gC3N4/CdS photocatalytic semiconductor and eco-friendly renewable loofah sponge as biocarrier in the ICPB. The photocatalyst gC3N4/CdS was prepared and their synergistic photocatalytic degradation of ciprofloxacin were assessed and the results shows that gC3N4/CdS (20%) exhibit 79% degradation efficiency in 36 h. Further ICPB exhibited enhanced ciprofloxacin degradation 95% at 36 h. The 62.4% and 81.1% of chemical oxygen demand (COD) removal was obtained in the photocatalysis and ICPB respectively. Enhanced degradation of ciprofloxacin and COD removal was due to the synergetic photoelectrons generated from the gC3N4/CdS (20%) transferred to the bacterial communities which intensely mineralize the degradation products produced from the photocatalysis process. Furthermore, production of hydroxyl •OH and superoxide radical anion O2• were identified actively involved in the degradation of ciprofloxacin. The biocarrier loofah sponge provided favourable environment to the bacterial communities for the formation of biofilm and production of extracellular polymeric substances (EPS). Excess quantity of EPS production in the ICPB helps in the prevention of toxicity of photocatalyst to bacterial communities as well as facilitate the extracellular electron transfer process. This work provides a novel path for enhanced degradation of ciprofloxacin using eco-friendly, low cost and renewable biocarrier loofah sponge in the ICPB system.

Incorporation of g-C3N4 nanosheets and CuO nanoparticles on polyester fabric for the dip-catalytic reduction of 4 nitrophenol

In the present work, we present the preparation of a new emerged heterogeneous catalyst (PE/g-C3N4/CuO) by in situ deposition of copper oxide nanoparticles (CuO) over the graphitic carbon nitride (g-C3N4) as the active catalyst and polyester (PE) fabric as the inert support. The synthesized sample (PE/g-C3N4/CuO) "dip catalyst" was studied by using various analytical techniques (Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy and dispersive X-ray spectroscopy (SEM/EDX), and transmission electron microscopy (TEM). The nanocomposite is utilized as heterogeneous catalysts for the 4-nitrophenol reduction in the presence of NaBH4, in aqueous solutions. According to experimental results, PE/g-C3N4/CuO with a surface of 6 cm2 (3 cm × 2 cm) demonstrated the catalyst exhibit excellent catalytic activity with 95% reduction efficiency for only 4 min of reaction and an apparent reaction rate constant (Kapp) of 0.8027 min-1. Further evidence that this catalyst based on prepared PE support can be a good contender for long-lasting chemical catalysis comes from the remarkable stability after 10 repetitions reaction cycles without a noticeably loss in catalytic activity. The novelty of this work consists to fabricate of catalyst based of CuO nanoparticles stabilized with g-C3N4 on the surface of an inert substrate PE, which results in an heterogenous dip-catalyst that can be easily introduced and isolated from the reaction solution with good retention of high catalytic performance in the reduction of 4-nitrophenol.

Facile synthesis of CuO/g-C3N4 nanolayer composites with superior catalytic reductive degradation behavior

The cupric oxide (CuO) loaded graphitic carbon nitride (g-C₃N₄) nanocomposites (CuO/g-C₃N₄) were prepared by a facile calcination method. The formation of monoclinic CuO nanocrystals along with g-C₃N₄ was confirmed by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopic analysis. X-ray photoelectron spectral (XPS) analysis further confirms the formation of CuO/g-C₃N₄. Distribution of CuO stone-like crystalline nanoparticles on g-C₃N₄ nanosheets was observed by transmission electron microscopic images. The influence of CuO loading on the optical property of g-C₃N₄ was determined by ultraviolet (UV)-visible absorption and photoluminescence (PL) spectral analysis. Band gap was decreased from 2.7 to 2.3 eV by the addition of CuO nanoparticles. The catalytic performance of the synthesized samples in 4-nitrophenol (4-NP) and methyl orange (MO) reduction was evaluated. The 5 wt% CuO/g-C₃N₄ showed 99.5% (7 min) and 99.7% (4 min) reduction efficiency for 4-NP and MO respectively. The 5 wt% CuO/g-C₃N₄ could become a potential catalyst in the chemical treatment of organic pollutants.

Intimately coupled gC3N4 photocatalysis and mixed culture biofilm enhanced detoxification of sulfamethoxazole: Elucidating degradation mechanism and toxicity assessment

In recent years, wide spread of antibiotic-resistant microorganisms and genes emerging globally, an eco-friendly method for efficient degradation of antibiotics from the polluted environment is essential. Intimately coupled photocatalysis and biodegradation (ICPB) using gC₃N₄ for enhanced degradation of sulfamethoxazole (SMX) was investigated. The gC₃N₄ were prepared and coated on the carbon felt. The mixed culture biofilm was developed on the surface as a biocarrier. The photocatalytic degradation showed 74%, and ICPB exhibited 95% SMX degradation efficiency. ICPB showed superior visible light adsorption, photocatalytic activity, and reduced charge recombination. The electron paramagnetic resonance spectrum confirms that the generation of •OH and O₂• radicals actively participated in the degradation of SMX into biodegradable intermediated compounds, and then, the bacterial communities present in the biofilm mineralized the biodegradable compound into carbon dioxide and water. Moreover, the addition of NO₃^-, PO₄^-, and Cl^- significantly enhanced the degradation efficiency by trapping the surface electron. Stability experiments confirmed that gC₃N₄ biohybrid can maintain 85% SMX degradation efficiency after 5 consecutive recycling. Extracellular polymeric substances characterization results show that biohybrid contains 47 mg/L, 14 mg/L, and 13 mg/L protein, carbohydrate, and humic acid, respectively, which can protect the bacterial communities from the antibiotic toxicity and reactive oxygen species. Furthermore, biotoxicity was investigated using degradation products on E.coli and results revealed 83% detoxification efficiency. Overall, this study suggested that gC₃N₄ photocatalyst in an ICPB can be used as a promising eco-friendly method to degrade sulfamethoxazole efficiently.

Degradation of Organic Dyes Using the Ionizing Irradiation Process in the Presence of the CN/CD3/Fe6 Composite: Mechanistic Studies

Organic dyes are ubiquitous pollutants in various aquatic environments as they are produced in abundance and used widely. In the present work, the degradation and mineralization of various organic dyes such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB), following the electron beam irradiation method in the presence of a graphitic carbon nitride/carbon nanodots/Fe(II) (CN/CD₃/Fe₆) composite, were studied. The removal efficiency of MB reached 81.7% under conditions of electron beam irradiation (EBI) when the total irradiation dose was 5 kGy. This increased to 91.2% in the presence of the CN/CD₃/Fe₆ composite. The mineralization efficiency increased from 30.1 to 47.3% when the composite was added, and the total irradiation dose was 20 kGy. The removal efficiency of organic dyes was not significantly affected in the pH range of 3-11. Results from cyclic experiments conducted using MB degradation indicated that the CN/CD₃/Fe₆ composite exhibited good stability and reusability even after five irradiation cycles. Results from scavenging experiments revealed that ^•OH was the predominant reactive species during the MB degradation process. Intermediates produced in the synergistic system (EBI&CN/CD₃/Fe₆ system) consisting of the CN/CD₃/Fe₆ composite and EBI were detected using the liquid chromatography-mass spectrometry (LC-MS) technique. Based on the results, the possible degradation mechanism and pathways for MB were proposed.

2D Personality of Multifunctional Carbon Nitrides towards Enhanced Catalytic Performance in Energy Storage and Remediation

Numerous scholars in the scientific and management areas have been overly focused on contemporary breakthroughs in two-dimensional objects for multiple prospective applications. Photochemical and electrocatalytic functions of integrated circuits associated with multi-component tools have been enhanced by designing the macro- and microstructures of the building blocks. Therefore, the current research attempts to explore a larger spectrum of layered graphitic carbon nitrides (g-C3N4) and their derivatives as an efficient catalyst. By executing systematic manufacturing, optimization, and evaluation of its relevance towards astonishing energy storage devices, adsorption chemistry, and remediation, many researchers have focused on the coupling of such 2D carbon nitrides combined with suitable elementals. Hybrid carbon nitrides have been promoted as reliable 2D combinations for the enhanced electrophotocatalytic functionalities, proved by experimental observations and research outputs. By appreciating the modified structural, surface, and physicochemical characteristics of the carbon nitrides, we aim to report a systematic overview of the g-C3N4 materials for the application of energy storages and environments. It has altered energy band gap, thermal stability, remarkable dimensional texturing, and electrochemistry, and therefore detailed studies are highlighted by discussing the chemical architectures and atomic alternation of g-C3N4 (2D) structures.