Tuning adsorption capacity of metal–organic frameworks with Al3+ for phosphorus removal: Kinetics, isotherm and regeneration

Advanced removal of phosphorus from urban sewage using chemical precipitation by Fe-Al composite coagulants

Phosphorus (P) removal is a significant issue in wastewater treatment. This study applies Fe-Al composite coagulant to the advanced treatment of different P forms in biological effluent. For 90% total P removal, the dosage of FeCl3-AlCl3 composite coagulant reduces by 27.19% and 43.28% than FeCl3 and AlCl3 only, respectively. Changes in effluent P forms could explain the phenomenon of composite coagulant dosage reduction. The suspended P in the effluent of composite coagulant is easier removed by precipitation than single coagulant. In this study, the hydrolysis speciations of Fe3+, Fe2+, and Al3+ at a pH range are calculated by Visual MINTEQ. Changes in the morphology of metal hydroxides correlate with P removal at pH 4-9. Besides, analyses of scanning electron microscope (SEM), Fourier transformed infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) are performed on the coagulation precipitations. Fe2+ reacts directly with P to form flocs of Fe3(PO4)2, and Al2(SO4)3 assists in the sedimentation of the small-volume flocs. Al13 is a significant hydrolysis product of Al3+, and Fe and P would substitute for the peripheral AlVI of the Al13 structure to form stable Fe-O-Al covalent bonds.

Phosphorus removal from water by the metal-organic frameworks (MOFs)-based adsorbents: A review for structure, mechanism, and current progress

Efficacious phosphate removal is essential for mitigating eutrophication in aquatic ecosystems and complying with increasingly stringent phosphate emission regulations. Chemical adsorption, characterized by simplicity, prominent treatment efficiency, and convenient recovery, is extensively employed for profound phosphorus removal. Metal-organic frameworks (MOFs)-derived metal/carbon composites, surpassing the limitations of separate components, exhibit synergistic effects, rendering them tremendously promising for environmental remediation. This comprehensive review systematically summarizes MOFs-based materials' properties and their structure-property relationships tailored for phosphate adsorption, thereby enhancing specificity towards phosphate. Furthermore, it elucidates the primary mechanisms influencing phosphate adsorption by MOFs-based composites. Additionally, the review introduces strategies for designing and synthesizing efficacious phosphorus capture and regeneration materials. Lastly, it discusses and illuminates future research challenges and prospects in this field. This summary provides novel insights for future research on superlative MOFs-based adsorbents for phosphate removal.

Emerging iron-based mesoporous materials for adsorptive removal of pollutants: Mechanism, optimization, challenges, and future perspective

Iron-based materials (IBMs) have shown promise as adsorbents due to their unique physicochemical properties. This review provides an overview of the different types of IBMs, their synthesis methods, and their properties. Results found in the adsorption of emerging contaminants to a wide range of IBMs are discussed. The IBMs used were evaluated in terms of their maximum uptake capacity, with special consideration given to environmental conditions such as contact time, solution pH, initial pollutant concentration, etc. The adsorption mechanisms of pollutants are discussed taking into account the results of kinetic, isotherm, thermodynamic studies, surface complexation modelling (SCM), and available spectroscopic data. A current overview of molecular modeling and simulation studies related to density functional theory (DFT), surface response methodology (RSM), and artificial neural network (ANN) is presented. In addition, the reusability and suitability of IBMs in real wastewater treatment is shown. The review concludes with the strengths and weaknesses of current research and suggests ideas for future research that will improve our ability to remove contaminants from real wastewater streams.

Studies on ultrafast and remarkable removal of phosphate from sewage water by metal-organic frameworks

In the proposed research, a lanthanum-doped metal-organic framework (La-ATP) has been synthesised to remove phosphate from contaminated aqueous solutions. La-ATP was synthesised by a green energy-saving route using microwave irradiation and exhibited a phenomenal sorption capacity of 290 mg/g for the removal of phosphate. At a minimal dose of 0.1 g/L, 25 mg/L of phosphate gets reduced to 6.3 mg/L within 5 min and reaches equilibrium in 25 min. The isoelectric point of La-ATP was found to be 8.99, and it is efficient in removing phosphate over a wide range of pH 5-10. The existence of commonly occurring competing anions like sulphate, fluoride, chloride, arsenate, bicarbonate, and nitrate does not affect the uptake capacity of La-ATP towards phosphate ions. Furthermore, the robustness of La-ATP is demonstrated by its applicability to remove phosphate from real-life sewage water by reducing 10 mg/L of phosphorus from sewage water to < 0.02 mg/L. The primary mechanism governing phosphate removal was found to be ionic interaction and ligand exchange. Therefore, La-ATP can be considered a viable candidate for the treatment of eutrophic water streams because of its high sorption capacity, super-fast kinetics, and adaptability to contaminated sewage.

Synthesis of a New Co Metal-Organic Framework Assembled from 5,10,15,20-Tetrakis((pyridin-4-yl) phenyl)porphyrin "Co-MTPhPyP" and Its Application to the Removal of Heavy Metal Ions

The synthesis of a Co metal-organic framework assembled from 5,10,15,20-tetrakis((pyridin-4-yl)phenyl)porphyrin; TPhPyP) "Co-MTPhPyP" is reported. The TPhPyP ligand was synthesized via aldehyde condensation in 28% yield and characterized by ¹H nuclear magnetic resonance (¹H NMR), Fourier-transform infrared (FTIR), high-resolution mass spectrometry (HRMS), and UV-visible spectroscopy (UV-vis). Co-MTPhPyP was prepared by the solvothermal method from TPhPyP and CoCl₂·H₂O in 55% yield and characterized by X-ray powder diffraction (XRD), FTIR, thermogravimetric analysis (TGA), field-emission scanning electron microscopy with energy-dispersive X-ray (FESEM-EDS), X-ray photoelectron spectroscopy (XPS), and dynamic light scattering (DLS), showing a particle size distribution of 418 ± 58 nm. The sorption properties of the Co-MTPhPyP for the effective removal of Pb(II) and Cu(II) were evaluated in an aqueous medium and Cthe results showed uptake capacities of 383.4 and 168 mg of the metal g^-1 after 2 h, respectively. Kinetic studies of Pb(II) adsorption by Co-MTPhPyP were adjusted to the pseudo-second-order model with a maximum adsorption capacity of 458.8 mg g^-1 at 30 min of exposition.

Removal of ammonia nitrogen, nitrate, and phosphate from aqueous solution using biochar derived from Thalia dealbata Fraser: effect of carbonization temperature

Thalia dealbata Fraser-derived biochar was prepared at different carbonization temperatures to remove nutrients in aqueous solution. Thermogravimetry/differential thermogravimetry (TG/DTG) was used to analyze the carbonization and decomposition procedure of Thalia dealbata Fraser. X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), zeta potential, and N₂ adsorption-desorption isotherms were employed to characterize the prepared biochar. The carbonization temperature obviously effected the physical and chemical properties of biochar. The adsorption efficiency of ammonia (NH₄⁺-N), nitrate (NO₃^--N), and phosphate (PO₄^3-) adsorption on biochar was tested. Pseudo-first-order kinetic, pseudo-second-order kinetic, and intra-particle diffusion kinetic models were used to fit adsorption kinetic. Langmuir and Freundlich models were used to fit adsorption isotherms. The theoretical adsorption capacity of NH₄⁺-N, NO₃^--N, and PO₄^3- on biochar was 5.8 mg/g, 3.8 mg/g, and 1.3 mg/g, respectively. This study provides the insights for effect of carbonization temperature on biochar preparation and application.

Synthesis of MgAl-LDH@ZIF-8 composites by in situ growth method for highly efficient phosphate removal

Removal of phosphate from wastewater by adsorption has become one of the effective ways to mitigate the negative effects of eutrophication in water bodies, and efficient adsorbent is the key....