Activation of Na2S2O8 by MIL-101(Fe)/Co3O4 composite for degrading tetracycline with visible light assistance

In-situ Hf/Zr co-doped Fe2O3 nanorod decorated with CuOx/CoOx: Enhanced photocatalytic performance for antibacterial and organic pollutants

Herein, we successfully synthesized Hf/Zr co-doping on Fe2O3 nanorod photocatalyst by a hydrothermal process and quenching methods. The synergistic roles of Hf and Zr double-doping on the bacteria inactivation test and decomposition of organic pollutants were investigated in detail for the 1 wt% CoOx loaded Hf/Zr-Fe2O3 NRs and CuOx/CoOx loaded Hf/Zr-Fe2O3 NRs photocatalyst. Initially, the rod-like porous morphology of the Hf/Zr-doped Fe2O3 NRs was produced via a hydrothermal method at various Hf co-doping (0, 2, 4, 7 and 10)%. Further, CoOx and CuOx loaded by a wet impregnation approach on the Hf/Zr-Fe2O3 NRs and a highly photoactive Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst were developed. After the Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst treatment, the Bio-TEM imagery of bacterial cells showed extensive morphological deviations in cell membranes. Hf(4)/Zr-Fe2O3 NR achieved 84.1% orange II degradation upon 3 h illumination, which is higher than that of Hf-Fe2O3 and Zr-Fe2O3 (68.7 and 73.5%, respectively). Additionally, the optimum sample, Hf(4)/Zr-Fe2O3 [CoOx/CuOx] photocatalyst, exhibited 95.5% orange II dye degradation after light radiation for 3 h. Optimized Hf(4)/Zr-Fe2O3 [CoOx/CuOx] catalysts exhibited 99.9% and 99.7% inactivation of E. coli and S. aureus with 120 min, respectively. Further, scavenger experiments revealed that the electrons are the primary responsible species for photocatalytic kinetics. This work will provide a rapid method for the development of high photocatalytic performance materials for bacterial disinfection and organic degradation.

MIL-101(Fe)/WS2 composites activated Na2S2O8 with visible light for removal of tetracycline

MIL-101(Fe)/WS2 catalyst was composited using a solvothermal method. To study the physical and chemical properties of the composite material, a series of characterizations such as scanning electron microscope (SEM), X-ray diffraction (XRD), and catalytic experiments were carried out. The photocatalysis of the prepared catalyst in the degradation of tetracycline was investigated using persulfate (PS, Na2S2O8) as a cocatalyst under visible light illumination. The above system can remove about 80% of tetracycline within 40 min. After three cyclic experiments, the material showed good recycling. According to material characterization and various experimental results, the enhanced performance of the material was attributed to the reduction of the recombination efficiency of photogenerated e- and h+, and activated persulfate to produce a large number of free radicals such as O2•-, SO4•- and 1O2 produced by the active sites provided by the catalyst's high specific surface area.

Magnetically recoverable sol-gel auto-combustion developed Ni1-xCuxDyyFe2-yO4 magnetic nanoparticles for photocatalytic, electrocatalytic, and antibacterial applications

Copper and dysprosium doped NiFe₂O₄ magnetic nanomaterials, Ni_1-xCu_xDy_yFe_2-yO₄ (x = y = 0.00, 0.01, 0.02, 0.03), was prepared by utilizing sol-gel auto-combustion approach to inspect the photodegradation of methylene blue (MB) pollutant and also, to perform the electrocatalytic water splitting and antibacterial studies. The XRD analysis reveal the growth of a single-phase spinel cubic structure for produced nanomaterials. The magnetic traits show an increasing trend in saturation magnetization (M_s) from 40.71 to 47.90 emu/g along with a decreasing behaviour of coercivity from 158.09 to 142.31 Oe at lower and higher Cu and Dy doping content (x = 0.0-0.01). The study of optical band gap values of copper and dysprosium-doped nickel nanomaterials decreased from 1.71 to 1.52 eV. This will increase the photocatalytic degradation of methylene blue pollutant from 88.57% to 93.67% under natural sunlight, respectively. These findings clearly show that under natural sunlight irradiation for 60 min, the produced N4 photocatalyst displays the greatest photocatalytic activity with a maximum removal percentage of 93.67%. The electrocatalytic characteristics of produced magnetic nanomaterials for both HER and OER were examined with a Calomel electrode taking as a reference in a 0.5 N H₂SO₄ and 0.1 N KOH electrolyte. The N4 electrode demonstrated considerable 10 and 0.024 mA/cm² of current density, with onset potentials of 0.99 and 1.5 V for HER and OER and also, have tafel slopes of 58.04 and 295 mV/dec, respectively. The antibacterial activity for produced magnetic nanomaterials was examined against various bacteria (Bacillus subtilis, Staphylococcus aureus, S. typhi, and P. aeruginosa) in which N3 sample produced significant inhibition zone against gram-positive bacteria (Bacillus subtilis and Staphylococcus aureus) but no zone of inhibition against gram-negative bacteria (S. typhi and P. aeruginosa). With all these superior traits, the produced magnetic nanomaterials are highly valuable for the wastewater remediation, hydrogen evolution, and biological applications.

Hydrothermal synthesis of sewage sludge biochar for activation of persulfate for antibiotic removal: Efficiency, stability and mechanism

The use of biochar materials as catalysts to activate persulfate (PS) for the degradation of antibiotics has attracted much attention. In this study, a carbonaceous material (Cu/Zn-SBC) was prepared from sewage sludge by hydrothermal modification. The efficiency of PS activation by Cu/Zn-SBC was investigated using tetracycline (TC) as the model antibiotic. In the Cu/Zn-SBC + PS system, the TC removal rate reached 90.13% at 10 min and exceeded 99% within 4 h. This not only met the requirement of removing large amounts of pollutants in a short time but also achieved the complete removal of pollutants in the subsequent time. Additionally, the Cu/Zn-SBC + PS system was found to be dominated by radical and nonradical pathways. Cu, hydroxyl and carboxyl groups on the surface of Cu/Zn-SBC promoted the production of free radicals and non-free radicals. Under several changes in reaction conditions and water environment factors, the TC removal rate remained above 85% within 10 min. Furthermore, the removal rate of TC was still 85.79% when Cu/Zn-SBC combined with PS was reused twice and 77.14% when reused four times. This study provides an ideal solution for the treatment of sewage sludge, and offers a stable and efficient material for removing antibiotics from wastewater.