Biomimetic Au/CeO2 Catalysts Decorated with Hemin or Ferrous Phthalocyanine for Improved CO Oxidation via Local Synergistic Effects

Critical role of NiO support morphology for high activity of Au/NiO nanocatalysts in CO oxidation

The effect on catalytic behavior induced by different morphology of NiO supports has been investigated using the example of gold-catalyzed CO oxidation. Three NiO-supported nanogold consisting of nanogold deposited onto NiO nanorods (NiO-R), nanosheet (NiO-S), and nanodiscs (NiO-D) were prepared. Transmission electron microscopy(TEM)/Scanning transmission electron microscopy(STEM) investigations indicated that Au particles dominantly exposed Au(111) facets virtually independent of NiO architectures. Au/NiO-S displayed a normal Arrhenius-type behavior. Au/NiO-R and Au/NiO-D showed an atypical behavior, characterized by a U-shaped curve of activity vs. temperature, which is attributed to the carbonate accumulation on whose catalytically active sites. On Au/NiO-R, a stable CO-conversion rate of 1.78 molCO gAu -1 h-1 at 30°C was achieved, which is among the higher rates reported so far for supported Au-based systems. DRIFTS measurement identified Auδ+ species as crucial CO adsorption sites promoting CO oxidation, and the catalytic CO oxidation should obey Mars-van Krevelen (<200°C) and Eley-Rideal mechanism (>240°C).

Bioinspired molecule-functionalized Cu with high CO adsorption for efficient CO electroreduction to acetate

Electrochemical reduction of carbon dioxide (CO2) or carbon monoxide (CO) to valuable multi-carbon (C2+) products like acetate is a promising approach for a sustainable energy economy. However, it is still challenging to achieve high activity and selectivity for acetate production, especially in neutral electrolytes. Herein, a bioinspired hemin/Cu hybrid catalyst was developed to enhance the surface *CO coverage for highly efficient electroreduction of CO to acetate fuels. The hemin/Cu electrocatalyst exhibits a remarkable faradaic efficiency of 45.2% for CO-to-acetate electroreduction and a high acetate partial current density of 152.3 mA cm-2. Furthermore, the developed hybrid catalyst can operate stably at 200 mA cm-2 for 14.6 hours, producing concentrated acetate aqueous solutions (0.235 M, 2.1 wt%). The results of in situ Raman spectroscopy and theoretical calculations proved that the Fe-N4 structure of hemin could enhance the CO adsorption and enrich the local concentration of CO, thereby improving C-C coupling for acetate production. In addition, compared to the unmodified Cu catalysts, the Cu catalysts functionalized with cobalt phthalocyanine with a Co-N4 structure also exhibit improved acetate performance, proving the universality of this bioinspired molecule-enhanced strategy. This work paves a new way to designing bioinspired electrolysis systems for producing specific C2+ products from CO2 or CO electroreduction.

Boosting Photo-Electro-Fenton Process Via Atomically Dispersed Iron Sites on Graphdiyne for InVitro Hydrogen Peroxide Detection

Hydrogen peroxide (H2 O2 ) is essential in oxidative stress and signal regulation of organs of animal body. Realizing in vitro quantification of H2 O2 released from organs is significant, but faces challenges due to short lifetime of H2 O2 and complex bio-environment. Herein, rationally designed and constructed a photoelectrochemical (PEC) sensor for in vitro sensing of H2 O2 , in which atomically dispersed iron active sites (Hemin) modified graphdiyne (Fe-GDY) serves as photoelectrode and catalyzes photo-electro-Fenton process. Sensitivity of Fe-GDY electrode is enhanced 8 times under illumination compared with dark condition. The PEC H2 O2 sensor under illumination delivers a wide linear range from 0.1 to 48 160 µm and a low detection limit of 33 nm, while demonstrating excellent selectivity and stability. The high performance of Fe-GDY is attributed to, first, energy levels matching of GDY and Hemin that effectively promotes the injection of photo-generated electrons from GDY to Fe3+ for reduced Fe2+ , which facilitates the Fe3+ /Fe2+ cycle. Second, the Fe2+ actively catalyzes H2 O2 to OH- through the Fenton process, thereby improving the sensitivity. The PEC sensor demonstrates in vitro quantification of H2 O2 released from different organs, providing a promising approach for molecular sensing and disease diagnosis in organ levels.

Fabrication of supported Pt/CeO2 nanocatalysts doped with different elements for CO oxidation: theoretical and experimental studies

Supported Pt/CeO₂ catalysts have been widely used in carbon monoxide (CO) oxidation; however, the high oxygen vacancy formation energy (E_vac) in the process leads to the poor performance of these catalysts. Herein, we explored different element (Pr, Cu, or N) doped CeO₂ supports using Ce-based metal-organic frameworks (MOFs) as precursors via calcination treatment. The obtained CeO₂ supports were used to load Pt nanoparticles. These catalysts were systematically characterized by various techniques, and they showed superior catalytic activity for CO oxidation compared to undoped catalysts which could be attributed to the formation of Ce³⁺, and high amounts of O_ads/(O_ads + O_lat) and Pt^δ+/Pt_total. Moreover, density functional theory calculations with on-site Coulomb interaction correction (DFT+U) were performed to provide atomic-scale insights into the reaction process by the Mars-van Krevelen (M-vK) mechanism, which revealed that the element-doped catalysts could simultaneously reduce the adsorption energies of CO and lower reaction energy barriers in the *OOCO associative pathway.

Versatile Construction of Biomimetic Nanosensors for Electrochemical Monitoring of Intracellular Glutathione

The current strategies for nanoelectrode functionalization usually involve sophisticated modification procedures, uncontrollable and unstable modifier assembly, as well as a limited variety of modifiers. To address this issue, we propose a versatile strategy for large-scale synthesis of biomimetic molecular catalysts (BMCs) modified nanowires (NWs) to construct functionalized electrochemical nanosensors. This design protocol employs an easy, controllable and stable assembly of diverse BMCs-poly(3,4-ethylenedioxythiophene) (PEDOT) composites on conductive NWs. The intrinsic catalytic activity of BMCs combined with outstanding electron transfer ability of conductive polymer enables the nanosensors to sensitively and selectively detect various biomolecules. Further application of sulfonated cobalt phthalocyanine functionalized nanosensors achieves real-time electrochemical monitoring of intracellular glutathione levels and its redox homeostasis in single living cells for the first time.

Cobalt Phthalocyanine Supported on Mesoporous CeO2 as an Active Molecular Catalyst for CO Oxidation

Heterogenization of biomolecules by immobilizing on a metal oxide support could greatly enhance their catalytic activity and stability, but their interactions are generally weak. Herein, cobalt phthalocyanine (CoPc) molecules were firmly anchored on a Ce-based metal-organic framework (Ce-BTC) due to π-π stacking interaction between CoPc and aromatic frameworks of the BTC linker, which was followed by a calcination treatment to convert Ce-BTC to mesoporous CeO₂ and realize a molecular-level dispersion of CoPc on the surface of CeO₂. Various characterization results confirm the successful fabrication of molecular-based CoPc/CeO₂ catalysts which exhibited good CO oxidation performance. Importantly, we found that the mixing manner of Ce-BTC and CoPc remarkably affects the physicochemical properties which then determined the catalytic performance of the resultant CoPc/CeO₂ catalysts. In contrast, the direct physical mixing of CoPc and CeO₂ led to poor performance toward CO oxidation, manifesting that the Ce-BTC-mediated CoPc loading strategy is promising for the heterogenization of catalytic biomolecules.

Fabrication of Cu-hemin metal-organic-frameworks nanoflower supported on three-dimensional reduced graphene oxide for the amperometric detection of H2O2

A novel electrochemical sensor based on Cu-hemin metal-organic-frameworks nanoflower/three-dimensional reduced graphene oxide (Cu-hemin MOFs/3D-RGO) was constructed to detect H₂O₂ released from living cells. The nanocomposite was synthesized via a facile co-precipitation method using hemin as the ligand, then decorated with 3D-RGO. The prepared Cu-hemin MOFs showed a 3D hollow spherical flower-like structure with a large specific surface area and mesoporous properties, which could load more biomolecules and greatly enhance the stability by protecting the activity of hemin. In addition, the introduction of 3D-RGO effectively enhanced the conductivity of Cu-hemin MOFs. Thus, the proposed sensor (Cu-hemin MOFs/3D-RGO/GCE) showed excellent electrochemical performances towards H₂O₂ with a wide linear range (10-24,400 μM), high sensitivity (207.34 μA mM^-1 cm^-2), low LOD (0.14 μM), and rapid response time (less than 3 s). Most importantly, we prepared a Cu-hemin MOFs/3D-RGO/ITO electrode with cells growing on it. Compared with detecting H₂O₂ in cell suspension by GCE-based electrode, adhesion of cells on ITO could shorten the diffusion distance of H₂O₂ from solution to the surface of the electrode and achieve in situ and a real-time monitor of H₂O₂ released by living cells. This self-supported sensing electrode showed great potential applications in monitoring the pathological and physiological dynamics of cancer cells.