In vitro study of nano-hydroxyapatite/chitosan-gelatin composites for bio-applications

Platelet-rich fibrin (PRF) modified nano-hydroxyapatite/chitosan/gelatin/alginate scaffolds increase adhesion and viability of human dental pulp stem cells (DPSC) and osteoblasts derived from DPSC

Bone tissue regeneration strategies have incorporated the use of natural polymers, such as hydroxyapatite (nHA), chitosan (CH), gelatin (GEL), or alginate (ALG). Additionally, platelet concentrates, such as platelet-rich fibrin (PRF) have been suggested to improve scaffold biocompatibility. This study aimed to develop scaffolds composed of nHA, GEL, and CH, with or without ALG and lyophilized PRF, to evaluate the scaffold's properties, growth factor release, and dental pulp stem cells (DPSC), and osteoblast (OB) derived from DPSC viability. Four scaffold variations were synthesized and lyophilized. Then, degradation, swelling profiles, and morphological analysis were performed. Furthermore, PDGF-BB and FGF-B growth factors release were quantified by ELISA, and cytotoxicity and cell viability were evaluated. The swelling and degradation profiles were similar in all scaffolds, with pore sizes ranging between 100 and 250 μm. FGF-B and PDGF-BB release was evidenced after 24 h of scaffold immersion in cell culture medium. DPSC and OB-DPSC viability was notably increased in PRF-supplemented scaffolds. The nHA-CH-GEL-PRF scaffold demonstrated optimal physical-biological characteristics for stimulating DPSC and OB-DPSC cell viability. These results suggest lyophilized PRF improves scaffold biocompatibility for bone tissue regeneration purposes.

Deeply Implanted Conformal Antenna for Real-Time Bio-Telemetry Applications

The design and experimental verification of a deeply implanted conformal printed antenna is presented. The hip implant acts as the ground plane for a coaxial-cable-fed trapezoidal radiator designed to transmit biological signals collected within the body by proper biosensors. The arrangement, consisting of a metallic (or equivalent) hip implant, bio-compatible gypsum-based dielectric, and conformal radiator, was tested when the hosting 3D-printed plastic bone was immersed in tissue-like liquid contained in a plastic bucket. The dimensions of the set-up are similar to a human leg. Matching and radiation characteristics are presented in the industrial, scientific, and medical (ISM) frequency band (2.4-2.5 GHz), showing the feasibility of the proposed arrangement.

Silver-doped hydroxyapatite laden chitosan-gelatin nanocomposite scaffolds for bone tissue engineering: an in-vitro and in-ovo evaluation

Despite the advancements in bone tissue engineering, the majority of implant failures are caused due to microbial contamination. So, efforts are being made to develop biomaterial with antimicrobial property enhancing the regeneration of damaged bone tissue. In the present study, chitosan-gelatin (CG) scaffolds containing silver-doped hydroxyapatite (AgHAP) nanoparticles at 0.5%, 1.0% and 1.5% (w/v) were fabricated by lyophilization technique. The results confirmed the synthesis of AgHAP nanoparticles and showed interconnected porous structure of the nanocomposite scaffolds with 89%-75% porosity. Similarly, the swelling percentage, degradation behavior and compressive modulus of CG-AgHAP nanocomposite scaffolds were 1666%, 40% and 0.7 MPa, respectively. The developed nanocomposite scaffolds revealed better antimicrobial properties and bioactivity. The cell culture studies showed favorable viability of Wharton's jelly stem cells on CG-AgHAP nanocomposite scaffolds. CAM (chorioallantoic membrane) assay determined the angiogenic potential with better visualization of blood vessels in the CAM area. Hence, the obtained results confirmed that CG-AgHAP3 nanocomposite scaffold was the most suitable for bone tissue engineering applications among all scaffolds.

Surface Functionalization of Poly(lactic acid) via Deposition of Hydroxyapatite Monolayers for Biomedical Applications

The surface modification of poly(lactic acid) (PLA) using hydroxyapatite (HAP) particles via Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) approaches has been reported. The HAP monolayer was characterized at the air/water interface and deposited on three-dimensional (3D) printed poly(lactic acid). The deposition of HAP particles using the LS approach led to a larger surface coverage in comparison to the LB method, which produces a less uniform coating because of the aggregation of the particles. After the transfer of HAP on the PLA surface, the wettability values remained within the desired range. The presence of HAP on the surface of the polymer altered the topography and roughness in the nanoscale, as evidenced by the atomic force microscopy (AFM) images. This effect can be beneficial for the osteointegration of polymeric implants at an early stage, as well as for the reduction of the adherence of the microbial biofilm. Overall, the results suggest that the LS technique could be a promising approach for surface modification of PLA by hydroxyapatite with respective advantages in the biomedical field.

Cerium oxide nanoparticles disseminated chitosan gelatin scaffold for bone tissue engineering applications

Cell-free and cell-loaded constructs are used to bridge the critical-sized bone defect. Oxidative stress at the site of the bone defects is a major interference that slows bone healing. Recently, there has been an increase in interest in enhancing the properties of three-dimensional scaffolds with free radical scavenging materials. Cerium oxide nanoparticles (CNPs) can scavenge free radicals due to their redox-modulating property. In this study, freeze-drying was used to fabricate CG-CNPs nanocomposite scaffolds using gelatin (G), chitosan (C), and cerium oxide nanoparticles. Physico-chemical, mechanical, and biological characterization of CG-CNPs scaffolds were studied. CG-CNPs scaffolds demonstrated better results in terms of physicochemical, mechanical, and biological properties as compared to CG-scaffold. CG-CNPs scaffolds were cyto-friendly to MC3T3-E1 cells studied by performing in-vitro and in-ovo studies. The scaffold's antimicrobial study revealed high inhibition zones against Gram-positive and Gram-negative bacteria. With 79 % porosity, 45.99 % weight loss, 178.25 kPa compressive modulus, and 1.83 Ca/P ratio, the CG-CNP₂ scaffold displays the best characteristics. As a result, the CG-CNP₂ scaffolds are highly biocompatible and could be applied to repair bone defects.

Release kinetics modelling and in vivo-vitro, shelf-life study of resveratrol added composite transdermal scaffolds

In this article, the suitability of composite transdermal biomaterial for wound dressing applications is discussed. Bioactive, antioxidant Fucoidan and Chitosan biomaterials were doped into polyvinyl alcohol/β-tricalcium phosphate based polymeric hydrogels loaded with Resveratrol, which has theranostic properties, and biomembrane design with suitable cell regeneration properties was aimed. In accordance with this purpose, tissue profile analysis (TPA) was performed for the bioadhesion properties of composite polymeric biomembranes. Fourier Transform Infrared Spectrometry (FT-IR), Thermogravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM-EDS) analyses were performed for morphological and structural analyses of biomembrane structures. In vitro Franz diffusion mathematical modelling of composite membrane structures, biocompatibility (MTT test) and in vivo rat tests were performed. TPA analysis of resveratrol loaded biomembrane scaffold design; compressibility; 13.4 ± 1.9(g.s), hardness; 16.8 ± 1(g), adhesiveness; -11 ± 2.0(g.s), elasticity; 0.61 ± 0.07, cohesiveness; 0.84 ± 0.04 were found. Proliferation of the membrane scaffold was 189.83 % at 24 h and 209.12 % at 72 h. In the in vivo rat test; at the end of 28th day, it was found that biomembrane_3 provided 98.75 ± 0.12 % wound shrinkage. The shelf-life of RES in the transdermal membrane scaffold, which was determined as Zero order according to Fick's law in in vitro Franz diffusion mathematical modelling, was found to be approximately 35 days by Minitab statistical analysis. The importance of this study is that the innovative and novel transdermal biomaterial supports tissue cell regeneration and cell proliferation in theranostic applications as a wound dressing.

Gelatin/monetite electrospun scaffolds to regenerate bone tissue: Fabrication, characterization, and in-vitro evaluation

This work is dedicated to combining nanotechnology with bone tissue engineering to prepare and characterize electrospun gelatin/monetite nanofibrous scaffold with improved physicochemical, mechanical, and biological properties. Nanofibrous scaffolds possessing fiber diameter in the range of 242-290 nm were prepared after incorporating varying content of monetite nanoparticles up to 7 wt % into the gelatin matrix using the electrospinning technique. Cross-linking of gelatin chains in the scaffold was performed using 0.25 wt% glutaraldehyde as indicated by imine (-CN-) bond formation in the FTIR analysis. With an increase in monetite addition up to 7 wt%, a decrease in swelling ratio and bio-degradability of cross-linked gelatin scaffolds was observed. Gelatin scaffold with 7 wt% monetite content registered the highest values of tensile strength and tensile modulus of 18.8 MPa and 170 MPa, as compared to 0% and 5 wt% monetite containing scaffolds respectively. Cell viability and differentiation were studied after culturing MG-63 cells onto the scaffolds from confocal microscopy of live and dead cells images, MTT assay, and alkaline phosphatase assay for a cell culture period of up to 21 days. It was observed that 7 wt % monetite containing gelatin scaffold exhibited better MG-63 cell adhesion, proliferation, higher biomineralization, and ALP activity compared to 0% and 5 wt% monetite containing electrospun scaffolds studied here.

Frontiers of Hydroxyapatite Composites in Bionic Bone Tissue Engineering

Bone defects caused by various factors may cause morphological and functional disorders that can seriously affect patient's quality of life. Autologous bone grafting is morbid, involves numerous complications, and provides limited volume at donor site. Hence, tissue-engineered bone is a better alternative for repair of bone defects and for promoting a patient's functional recovery. Besides good biocompatibility, scaffolding materials represented by hydroxyapatite (HA) composites in tissue-engineered bone also have strong ability to guide bone regeneration. The development of manufacturing technology and advances in material science have made HA composite scaffolding more closely related to the composition and mechanical properties of natural bone. The surface morphology and pore diameter of the scaffold material are more important for cell proliferation, differentiation, and nutrient exchange. The degradation rate of the composite scaffold should match the rate of osteogenesis, and the loading of cells/cytokine is beneficial to promote the formation of new bone. In conclusion, there is no doubt that a breakthrough has been made in composition, mechanical properties, and degradation of HA composites. Biomimetic tissue-engineered bone based on vascularization and innervation show a promising future.

Improving the Mechanical Resistance of Hydroxyapatite/Chitosan Composite Materials Made of Nanofibers with Crystalline Preferential Orientation

The stability and mechanical properties of hydroxyapatite (HAp)/Chitosan composite materials depend on the dispersion of HAp aggregates in the chitosan matrix and on the chemical interaction between them. Therefore, hexagonal cross-sectioned HAp nanofibers were produced using a microwave-assisted hydrothermal method. Glutamic acid was used to control the HAp crystal growth; thereby, nanofibers were obtained with a preferential crystalline orientation, and they were grown along the “c” axis of HAp crystal structures. This morphology exposed the (300) and (100) crystal planes on the surface, and several phosphate groups and calcium ions were also exposed; they were able to form numerous chemical interactions with the amine, hydroxyl, and carbonyl groups of chitosan. Consequently, the final mechanical resistance of the composite materials was synergistically increased. Nanofibers were mixed with commercial chitosan using a sonotrode to improve their dispersion within the biopolymer matrix and prevent migration. The HAp nanofiber/Chitosan composite materials showed higher mechanical resistance than that observed in similar materials with the same chemical composition that were made of commercial HAp powders, which were used as reference materials. The mechanical resistance under tension of the composite materials made of nanofibers was similar to that reported for cortical bone.

Biogenic preparation of biphasic calcium phosphate powder from natural source of snail shells: bioactivity study

In this present work, carbonated apatite powder (CAP) and β-tricalcium phosphate (β-TCP) were prepared from waste snail shells via thermal decomposition followed by chemical precipitation method with phosphoric acid in a one step process. The CAP produced was thereafter reacted with a pore forming agent solution of ammonium bicarbonate to formed carbonated apatite powder- ammonium bicarbonate scaffold composites (CAP-AMB) and was deployed in a bioactivity experiment with simulated body fluid (SBF) media. The phase purity, crystallinity, particle size, thermal behaviour, elemental composition, morphology as well as the functional groups of snail shells, synthesized CAP and CAP-AMB scaffold were assessed by XRD, FE-SEM, TGA, EDX, TEM and FT-IR. XRD and selected area electron diffraction (SAED) results confirmed the synthesized apatite as pure amorphous powder which upon heat treatment, transformed to polycrystalline powder. Analysis of FT-IR results revealed that the apatite produced from snail shells (SS) contains phosphates and hydroxyl functional groups. Furthermore, the formation of carbonated apatite was also confirmed from the FT-IR result with peaks which appeared at 882 and 1484 cm−1 respectively, thus depicting a B-type apatite. Microscopy analyses by FE-SEM and TEM indicated that the prepared apatite is composed of different morphologies in the range of 5 to 200 nm long. The presence of trace elements such as K, C, Na, Mg and Mg which could play crucial functions in biological applications were detected by EDX measurement alongside Ca and P. The mixture of CAP with AMB produced interconnected pores structure with porosity in the range of 35–67%. The bioactivity study of the SBF treated CAP-AMB composite confirmed apatite formation on the scaffold surface which totally covered the pores after seven days of incubation. Thus, waste biomaterial of snail shells origin can be use for the production of pure apatite that could be useful in medical application.

Graphical abstract

Improved myocardial performance in infarcted rat heart by injection of disulfide-cross-linked chitosan hydrogels loaded with basic fibroblast growth factor

Myocardial infarction (MI) has been considered as the leading cause of cardiovascular-related deaths worldwide. Basic fibroblast growth factor (bFGF) is a member of the fibroblast growth factor family that promotes angiogenesis after MI; however, it has poor clinical efficacy due to proteolytic degradation, low drug accumulation, and severe drug-induced side effects. In this study, an injectable disulfide-cross-linked chitosan hydrogel loaded with bFGF was prepared via a thiol-disulfide exchange reaction for MI treatment. The thiol-disulfide exchange reaction between pyridyl disulfide-modified carboxymethyl chitosan (CMCS-S-S-Py) and reduced BSA (rBSA) was carried out under physiological conditions (37 °C and pH 7.4). The mechanical properties of the disulfide-cross-linked chitosan hydrogel were evaluated based on the molar ratio of the pyridyl disulfide groups of CMCS-S-S-Py and the thiol groups of rBSA. The disulfide-cross-linked chitosan hydrogel showed good swelling performance, rapid glutathione-triggered degradation behavior and well-defined cell proliferation towards NIH 3T3 fibroblast cells. In the process of establishing a rat MI model, the squeezing heart method was used to make the operation more accurate and the mortality of rats was decreased by using a ventilator. The disulfide-cross-linked chitosan hydrogel loaded with bFGF (bFGF-hydrogel) was injected into a peri-infarcted area of cardiac tissue immediately following MI. Echocardiography demonstrated that the left ventricular functions were improved by the bFGF-hydrogel after 28 days of treatment. Histological results revealed that the hydrogel significantly reduced the fibrotic area of MI, and this was further improved by the bFGF-hydrogel treatment. TUNEL and immunohistochemical staining results showed that the bFGF-hydrogel had a more synergistic effect on antiapoptosis and proangiogenesis than using either bFGF or the hydrogel alone.

Construction of a stereocomplex between poly(D-lactide) grafted hydroxyapatite and poly(L-lactide): toward a bioactive composite scaffold with enhanced interfacial bonding

The poly(L-lactide) (PLLA)/hydroxyapatite (HAP) composite scaffold is expected to combine the favorable compatibility and processability of PLLA with the excellent bioactivity and osteoconductivity of HAP. Unfortunately, the poor interfacial bonding between PLLA and HAP leads to a deterioration in mechanical properties. In this study, poly(D-lactide) (PDLA) was grafted onto the surface of HAP nanoparticles (g-HAP), and then g-HAP was incorporated into PLLA to improve interfacial bonding by stereocomplexation in a scaffold fabricated via selective laser sintering (SLS). The results showed that HAP nanoparticles were grafted with PDLA at a grafting rate of 8.72% by ring-opening polymerization through chemical bonding in the presence of the hydroxyl groups of HAP. The grafted PDLA formed an interfacial stereocomplex with PLLA via an intertwined spiral structure ascribed to their antiparallel and complementary configuration under the action of hydrogen bonding. Consequently, the tensile strength and modulus of the PLLA/g-HAP scaffold increased by 86% and 69%, respectively, compared to those of the PLLA/HAP scaffold. In addition, the scaffold displayed good bioactivity by inducing apatite nucleation and deposition and possessed good cytocompatibility for cell adhesion, growth and proliferation.

Highly Segregated Biocomposite Membrane as a Functionally Graded Template for Periodontal Tissue Regeneration

Guided tissue regeneration (GTR) membranes are used for treating chronic periodontal lesions with the aim of regenerating lost periodontal attachment. Spatially designed functionally graded bioactive membranes with surface core layers have been proposed as the next generation of GTR membranes. Composite formulations of biopolymer and bioceramic have the potential to meet these criteria. Chitosan has emerged as a well-known biopolymer for use in tissue engineering applications due to its properties of degradation, cytotoxicity and antimicrobial nature. Hydroxyapatite is an essential component of the mineral phase of bone. This study developed a GTR membrane with an ideal chitosan to hydroxyapatite ratio with adequate molecular weight. Membranes were fabricated using solvent casting with low and medium molecular weights of chitosan. They were rigorously characterised with scanning electron microscopy, Fourier transform infrared spectroscopy in conjunction with photoacoustic sampling accessory (FTIR-PAS), swelling ratio, degradation profile, mechanical tensile testing and cytotoxicity using human osteosarcoma and mesenchymal progenitor cells. Scanning electron microscopy showed two different features with 70% HA at the bottom surface packed tightly together, with high distinction of CH from HA. FTIR showed distinct chitosan dominance on top and hydroxyapatite on the bottom surface. Membranes with medium molecular weight showed higher swelling and longer degradation profile as compared to low molecular weight. Cytotoxicity results indicated that the low molecular weight membrane with 30% chitosan and 70% hydroxyapatite showed higher viability with time. Results suggest that this highly segregated bilayer membrane shows promising potential to be adapted as a surface layer whilst constructing a functionally graded GTR membrane on its own and for other biomedical applications.

Mechanical, Structural, and Biological Properties of Chitosan/Hydroxyapatite/Silica Composites for Bone Tissue Engineering

The aim of this work was to fabricate novel bioactive composites based on chitosan and non-organic silica, reinforced with calcium β-glycerophosphate (Ca-GP), sodium β-glycerophosphate pentahydrate (Na-GP), and hydroxyapatite powder (HAp) in a range of concentrations using the sol–gel method. The effect of HAp, Na-GP, and Ca-GP contents on the mechanical properties, i.e., Young’s modulus, compressive strength, and yield strain, of hybrid composites was analyzed. The microstructure of the materials obtained was visualized by SEM. Moreover, the molecular interactions according to FTIR analysis and biocompatibility of composites obtained were examined. The CS/Si/HAp/Ca-GP developed from all composites analyzed was characterized by the well-developed surface of pores of two sizes: large ones of 100 μm and many smaller pores below 10 µm, the behavior of which positively influenced cell proliferation and growth, as well as compressive strength in a range of 0.3 to 10 MPa, Young’s modulus from 5.2 to 100 MPa, and volumetric shrinkage below 60%. This proved to be a promising composite for applications in tissue engineering, e.g., filling small bone defects.

Evaluation of a novel nanocrystalline hydroxyapatite powder and a solid hydroxyapatite/Chitosan-Gelatin bioceramic for scaffold preparation used as a bone substitute material

Artificially fabricated hydroxyapatite (HAP) shows excellent biocompatibility with various kinds of cells and tissues which makes it an ideal candidate for a bone substitute material. In this study, hydroxyapatite nanoparticles have been prepared by using the wet chemical precipitation method using calcium nitrate tetra-hydrate [Ca(NO₃)₂.4H₂O] and di-ammonium hydrogen phosphate [(NH₄)₂ HPO₄] as precursors. The composite scaffolds have been prepared by a freeze-drying method with hydroxyapatite, chitosan, and gelatin which form a 3D network of interconnected pores. Glutaraldehyde solution has been used in the scaffolds to crosslink the amino groups (|NH₂) of gelatin with the aldehyde groups (|CHO) of chitosan. The X-ray diffraction (XRD) performed on different scaffolds indicates that the incorporation of a certain amount of hydroxyapatite has no influence on the chitosan/gelatin network and at the same time, the organic matrix does not affect the crystallinity of hydroxyapatite. Transmission electron microscope (TEM) images show the needle-like crystal structure of hydroxyapatite nanoparticle. Scanning Electron Microscope (SEM) analysis shows an interconnected porous network in the scaffold where HAP nanoparticles are found to be dispersed in the biopolymer matrix. Fourier transforms infrared spectroscopy (FTIR) confirms the presence of hydroxyl group (OH^-) , phosphate group (PO^3-₄) , carbonate group (CO^2-₃) , imine group (C=N), etc. TGA reveals the thermal stability of the scaffolds. The cytotoxicity of the scaffolds is examined qualitatively by VERO (animal cell) cell and quantitatively by MTTassay. The MTT-assay suggests keeping the weight percentage of glutaraldehyde solution lower than 0.2%. The result found from this study demonstrated that a proper bone replacing scaffold can be made up by controlling the amount of hydroxyapatite, gelatin, and chitosan which will be biocompatible, biodegradable, and biofriendly for any living organism.

A biodegradable soy protein isolate-based waterborne polyurethane composite sponge for implantable tissue engineering

A biodegradable soy protein isolate-based waterborne polyurethane composite sponge (SWPU) was prepared from soy protein isolate (SPI) and polyurethane prepolymer (PUP) by a process involving chemical reaction and freeze-drying. Effects of SPI content (0, 10%, 30%, 50%, 70%) on the micro-structure and physical properties of the composite sponges were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The results showed that the reaction between -NCO of PUP and -NH₂ of SPI formed porous SPI-based WPU composite sponges. The results of the water absorption ratio measurement, solvent resistance measurement and compressive testing showed that water absorption, hydrophilicity, and tensile strength in the dry state of the composite sponges increased with the increase of SPI content. Especially, the tensile strength ranged from 0.3 MPa to 5.5 MPa with the increase in SPI content. The cytocompatibility and biodegradability of the composite sponges were evaluated by in vitro cell culture and in vivo implantation experiments. The results indicated that a certain SPI content in the sponges could promote the adhesion, growth, and proliferation of cells, enhance the cytocompatibility and accelerate the degradation speed of composite sponges. During the in vivo implanting period within 9 months, SWPU-50 sponge containing 50% of SPI brought out the lowest activated inflammatory reaction, most newly-regenerated blood capillaries, and best histocompatibility. All results indicated that SWPU-50 composite sponges had greatest potential for tissue engineering.

Preparation and properties of a highly dispersed nano-hydroxyapatite colloid used as a reinforcing filler for chitosan

Hydroxyapatite/chitosan (HAp/CS) composites have been widely studied and applied in tissue engineering fields due to their excellent biocompatibility and degradability. However, to improve the mechanical properties of CS, cross-linking agents are commonly added, which will seriously affect its biocompatibility and safety. In this study, the homogenously dispersed nano-hydroxyapatite (nHAp) colloidal solution was first synthesized using a co-precipitation method. The three-dimensional porous nano-hydroxyapatite/chitosan (nHAp/CS) composite scaffolds with different nHAp contents were then obtained through an environmentally friendly freeze-drying process without any cross-linking. The microstructure, porosity, phase composition, swelling ratio, mechanical properties, and biocompatibility of the nHAp/CS scaffolds were thoroughly investigated. The as-prepared nHAp/CS scaffolds exhibited a high porosity and excellent swelling performance. Compared with pure CS scaffolds, the nHAp/CS composite scaffolds not only showed higher compressive modulus but also exhibited better biocompatibility. This study provides a simple and environmentally friendly technique to construct three-dimensional porous nHAp/CS composite scaffolds, which demonstrate promising potential by being a scaffold material for bone tissue engineering.

Biomimetic hydroxyapatite/silkfibre/methylcellulose composites for bone tissue engineering applications

Hydroxyapatite (HAP)/silk fibre (SF)/methylcellulose (MC) composites were developed by an electrospinning (E-Spin) method.

In vitro evaluation of biodegradable nHAP-Chitosan-Gelatin-based scaffold for tissue engineering application

The present study focuses on fabrication and characterisation of porous composite scaffold containing hydroxyapatite (HAP), chitosan, and gelatin with an average pore size of 250-1010 nm for improving wound repair and regeneration by Electrospinning method. From the results of X-Ray Diffraction (XRD) study, the peaks correspond to crystallographic structure of HAP powder. The presence of functional group bonds of HAP powder, Chitosan and scaffold was studied using Fourier Transform Infrared Spectroscopy (FTIR). The surface morphology of the scaffold was observed using Scanning Electron Microscope (SEM). The Bioactivity of the Nano composite scaffolds was studied using simulated body fluid solution at 37 ± 1°C. The biodegradability test was studied using Tris-Buffer solution for the prepared nanocomposites [nano Chitosan, nano Chitosan gelatin, Nano based Hydroxyapatite Chitosan gelatin]. The cell migration and potential biocompatibility of nHAP-chitosan-gelatin scaffold was assessed via wound scratch assay and were compared to povedeen as control. Cytocompatibility evaluation for Vero Cells using wound scratch assay showed that the fabricated porous nanocomposite scaffold possess higher cell proliferation and growth than that of povedeen. Thus, the study showed that the developed nanocomposite scaffolds are potential candidates for regenerating damaged cell tissue in wound healing process.

Gelatin-polysaccharide composite scaffolds for 3D cell culture and tissue engineering: Towards natural therapeutics

Gelatin is a promising material as scaffold with therapeutic and regenerative characteristics due to its chemical similarities to the extracellular matrix (ECM) in the native tissues, biocompatibility, biodegradability, low antigenicity, cost-effectiveness, abundance, and accessible functional groups that allow facile chemical modifications with other biomaterials or biomolecules. Despite the advantages of gelatin, poor mechanical properties, sensitivity to enzymatic degradation, high viscosity, and reduced solubility in concentrated aqueous media have limited its applications and encouraged the development of gelatin-based composite hydrogels. The drawbacks of gelatin may be surmounted by synergistically combining it with a wide range of polysaccharides. The addition of polysaccharides to gelatin is advantageous in mimicking the ECM, which largely contains proteoglycans or glycoproteins. Moreover, gelatin-polysaccharide biomaterials benefit from mechanical resilience, high stability, low thermal expansion, improved hydrophilicity, biocompatibility, antimicrobial and anti-inflammatory properties, and wound healing potential. Here, we discuss how combining gelatin and polysaccharides provides a promising approach for developing superior therapeutic biomaterials. We review gelatin-polysaccharides scaffolds and their applications in cell culture and tissue engineering, providing an outlook for the future of this family of biomaterials as advanced natural therapeutics.

Biopolymers - Calcium phosphates composites with inclusions of magnetic nanoparticles for bone tissue engineering

Composites based on combination of biopolymers (chitosan, hyaluronic acid and bovine serum albumin or gelatin), calcium phosphates (CP) and magnetic nanoparticles have been prepared by a biomimetic co-precipitation method. The biomimetic strategy is inspired by natural mineralization processes, where the synthesized minerals are usually combined with proteins, polysaccharides or other mineral forms to form composite, in physiological conditions of temperature and pH. The morphology of the magnetic composites, studied using scanning electron microscopy (SEM) indicated a macroporous structure, which influenced the retention of simulated biological fluids. Fourier transformed infrared spectroscopy and X-ray diffraction and Energy-dispersive X-ray spectroscopy (EDX) confirmed the composition of the scaffolds and the formation of various types of calcium phosphates with amorphous nature. The in vitro degradation studies showed a slow degradation process for magnetic composites that confirmed the tightly connection of the polymeric matrix with calcium phosphates, which limits the enzyme access to the degradable components and material disintegration. The magnetic scaffolds exhibited no negative effect on osteoblasts cell, emphasizing a good biocompatibility. Considering the scaffolds properties, some compositions based on calcium phosphates, chitosan, Hya/Bsa and more than 3% of MNPs are recommended for further optimization and in vivo tests.

Characterization of hydroxyapatite-containing alginate-gelatin composite films as a potential wound dressing

In this study, hydroxyapatite (HA)-containing alginate-gelatin films were prepared by solution casting method by blending alginate (A) and gelatin (G) solutions, followed by crosslinking with calcium chloride. HA (1, 2, 5, 10, 20% w/w) was added to film solutions prepared at different ratios (A:G = 40:60, 50:50, and 60:40) and the swelling and degradation behavior, mechanical, antimicrobial and thermal properties, and morphologies of the obtained films were examined. The release of tetracycline hydrochloride (TH), selected as a model drug, from the prepared films was studied. It was observed that the swelling ratio and weight loss of the films decreased as the amounts of alginate and HA increased. Scanning electron microscopy analysis indicated that as the amount of HA in the films increased, the film surface becomes rougher. The mechanical properties of the films were affected by the amount of HA and the A:G ratio. Incorporation of HA increased the thermal stability of films. The amount of TH released from the films within 15 min decreased as the amounts of alginate and hydroxyapatite increased. It was found that films containing TH showed slightly higher antimicrobial activity against Staphylococcus aureus than Escherichia coli.

Polymeric materials and films in dentistry: An overview

The use of polymeric materials (PMs) and polymeric films (PMFs) has increased in medicine and dentistry. This increasing interest is attributed to not only the excellent surfaces of PMs and PMFs but also their desired mechanical and biological properties, low production cost, and ease in processing, allowing them to be tailored for a wide range of applications. Specifically, PMs and PMFs are used in dentistry for their antimicrobial, drug delivery properties; in preventive, restorative and regenerative therapies; and for corrosion and friction reduction. PMFs such as acrylic acid copolymers are used as a dental adhesive; polylactic acids are used for dental pulp and dentin regeneration, and bioactive polymers are used as advanced drug delivery systems. The objective of this article was to review the literatures on the latest advancements in the use of PMs and PMFs in medicine and dentistry. Published literature (1990–2017) on PMs and PMFs for use in medicine and dentistry was reviewed using MEDLINE/PubMed and ScienceDirect resources. Furthermore, this review also explores the diversity of latest PMs and PMFs that have been utilized in dental applications, and analyzes the benefits and limitations of PMs and PMFs. Most of the PMs and PMFs have shown to improve the biomechanical properties of dental materials, but in future, more clinical studies are needed to create better treatment guidelines for patients.

Enhancing the mechanical and in vitro performance of robocast bioglass scaffolds by polymeric coatings: Effect of polymer composition

The effect of different polymeric coatings, including natural and synthetic compositions, on the mechanical performance of 45S5 bioglass robocast scaffolds is systematically analyzed in this work. Fully amorphous 45S5 bioglass robocast scaffolds sintered at 550 °C were impregnated with natural (gelatin, alginate, and chitosan) and synthetic (polycaprolactone, PCL and poly-lactic acid, PLA) polymers through a dip-coating process. Mechanical enhancement provided by these coatings in terms of both compressive strength and strain energy density was evaluated. Natural polymers, in general, and chitosan, in particular, were found to produce the greater reinforcement. The effect of these coatings on the in vitro bioactivity and degradation behavior of 45S5 bioglass robocast scaffolds was also investigated through immersion tests in simulated body fluid (SBF). Coatings from natural polymers, especially chitosan, are shown to have a positive effect on the bioactivity of 45S5 bioglass, accelerating the formation of an apatite-like layer. Besides, most coating compositions reduced the degradation (weight loss) rate of the scaffold, which has a positive impact on the evolution of their mechanical properties.

Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review

Bone repair materials are rapidly becoming a hot topic in the field of biomedical materials due to being an important means of repairing human bony deficiencies and replacing hard tissue. Magnesium (Mg) alloys are potentially biocompatible, osteoconductive, and biodegradable metallic materials that can be used in bone repair due to their in situ degradation in the body, mechanical properties similar to those of bones, and ability to positively stimulate the formation of new bones. However, rapid degradation of these materials in physiological environments may lead to gas cavities, hemolysis, and osteolysis and thus, hinder their clinical orthopedic applications. This paper reviews recent work on the use of Mg alloy implants in bone repair. Research to date on alloy design, surface modification, and biological performance of Mg alloys is comprehensively summarized. Future challenges for and developments in biomedical Mg alloys for use in bone repair are also discussed.

Development of Useful Biomaterial for Bone Tissue Engineering by Incorporating Nano-Copper-Zinc Alloy (nCuZn) in Chitosan/Gelatin/Nano-Hydroxyapatite (Ch/G/nHAp) Scaffold

Ceramic and metallic nanoparticles can improve the mechanical and biological properties of polymeric scaffolds for bone tissue engineering (BTE). In this work, nanohydroxyapatite (nHAp) and nano-copper-zinc alloy (nCuZn) were added to a chitosan/gelatin (Ch/G) scaffold in order to investigate the effects on morphological, physical, and biocompatibility properties. Scaffolds were fabricated by a freeze-drying technique using different pre-freezing temperatures. Microstructure and morphology were studied by scanning electron microscopy (SEM), glass transition (T_g) was studied using differential scanning calorimetry (DSC), cell growth was estimated by MTT assay, and biocompatibility was examined in vitro and in vivo by histochemistry analyses. Scaffolds and nanocomposite scaffolds presented interconnected pores, high porosity, and pore size appropriate for BTE. T_g of Ch/G scaffolds was diminished by nanoparticle inclusion. Mouse embryonic fibroblasts (MEFs) cells loaded in the Ch/G/nHAp/nCuZn nanocomposite scaffold showed suitable behavior, based on cell adhesion, cell growth, alkaline phosphatase (ALP) activity as a marker of osteogenic differentiation, and histological in vitro cross sections. In vivo subcutaneous implant showed granulation tissue formation and new tissue infiltration into the scaffold. The favorable microstructure, coupled with the ability to integrate nanoparticles into the scaffold by freeze-drying technique and the biocompatibility, indicates the potential of this new material for applications in BTE.

Scaffolds containing chitosan, gelatin and graphene oxide for bone tissue regeneration in vitro and in vivo

Critical-sized bone defects are augmented with cell free and cell loaded constructs to bridge bone defects. Improving the properties of three-dimensional scaffolds with multiple polymers and others is of growing interest in recent decades. Chitosan (CS), a natural biopolymer has limitations for its use in bone regeneration, and its properties can be enhanced with other materials. In the present study, the composite scaffolds containing CS, gelatin (Gn) and graphene oxide (GO) were fabricated through freeze-drying. These scaffolds (GO/CS/Gn) were characterized by the SEM, Raman spectra, FT-IR, EDS, swelling, biodegradation, protein adsorption and biomineralization studies. The inclusion of GO in the CS/Gn scaffolds showed better physico-chemical properties. The GO/CS/Gn scaffolds were cyto-friendly to rat osteoprogenitor cells, and they promoted differentiation of mouse mesenchymal stem cells into osteoblasts. The scaffolds also accelerated bridging of the rat tibial bone defect with increased collagen deposition in vivo. Hence, these results strongly suggested the potential nature of GO/CS/Gn scaffolds for their application in bone tissue regeneration.

Thermosensitive chitosan gels containing calcium glycerophosphate for bone cell culture

In this article, properties of thermosensitive chitosan hydrogels prepared with the use of chitosan chloride with β-glycerophosphate disodium salt pentahydrate enriched with calcium glycerophosphate are presented and compared with chitosan hydrogels with β-glycerophosphate disodium salt pentahydrate. The study is focused on the determination of hydrogel structure and biological testing of hydrogels with human osteoblasts line Saos-2. The structure of gels was visualized by scanning electron microscopy and was investigated by infrared spectroscopy. The crystallinity of gel structure was determined by X-ray diffraction analysis and thermal effects were determined using differential scanning calorimetry thermograms.

Application potential of bone marrow mesenchymal stem cell (BMSCs) based tissue-engineering for spinal cord defect repair in rat fetuses with spina bifida aperta

Spina bifida aperta are complex congenital malformations resulting from failure of fusion in the spinal neural tube during embryogenesis. Despite surgical repair of the defect, most patients who survive with spina bifida aperta have a multiple system handicap due to neuron deficiency of the defective spinal cord. Tissue engineering has emerged as a novel treatment for replacement of lost tissue. This study evaluated the prenatal surgical approach of transplanting a chitosan-gelatin scaffold seeded with bone marrow mesenchymal stem cells (BMSCs) in the healing the defective spinal cord of rat fetuses with retinoic acid induced spina bifida aperta. Scaffold characterisation revealed the porous structure, organic and amorphous content. This biomaterial promoted the adhesion, spreading and in vitro viability of the BMSCs. After transplantation of the scaffold combined with BMSCs, the defective region of spinal cord in rat fetuses with spina bifida aperta at E20 decreased obviously under stereomicroscopy, and the skin defect almost closed in many fetuses. The transplanted BMSCs in chitosan-gelatin scaffold survived, grew and expressed markers of neural stem cells and neurons in the defective spinal cord. In addition, the biomaterial presented high biocompatibility and slow biodegradation in vivo. In conclusion, prenatal transplantation of the scaffold combined with BMSCs could treat spinal cord defect in fetuses with spina bifida aperta by the regeneration of neurons and repairmen of defective region.

Chitosan and Its Potential Use as a Scaffold for Tissue Engineering in Regenerative Medicine

Tissue engineering is an important therapeutic strategy to be used in regenerative medicine in the present and in the future. Functional biomaterials research is focused on the development and improvement of scaffolding, which can be used to repair or regenerate an organ or tissue. Scaffolds are one of the crucial factors for tissue engineering. Scaffolds consisting of natural polymers have recently been developed more quickly and have gained more popularity. These include chitosan, a copolymer derived from the alkaline deacetylation of chitin. Expectations for use of these scaffolds are increasing as the knowledge regarding their chemical and biological properties expands, and new biomedical applications are investigated. Due to their different biological properties such as being biocompatible, biodegradable, and bioactive, they have given the pattern for use in tissue engineering for repair and/or regeneration of different tissues including skin, bone, cartilage, nerves, liver, and muscle. In this review, we focus on the intrinsic properties offered by chitosan and its use in tissue engineering, considering it as a promising alternative for regenerative medicine as a bioactive polymer.

Development of a bone substitute material based on alpha-tricalcium phosphate scaffold coated with carbonate apatite/poly-epsilon-caprolactone

Interconnected porous tricalcium phosphate ceramics are considered to be potential bone substitutes. However, insufficient mechanical properties when using tricalcium phosphate powders remain a challenge. To mitigate these issues, we have developed a new approach to produce an interconnected alpha-tricalcium phosphate (α-TCP) scaffold and to perform surface modification on the scaffold with a composite layer, which consists of hybrid carbonate apatite / poly-epsilon-caprolactone (CO3Ap/PCL) with enhanced mechanical properties and biological performance. Different CO3Ap combinations were tested to evaluate the optimal mechanical strength and in vitro cell response of the scaffold. The α-TCP scaffold coated with CO3Ap/PCL maintained a fully interconnected structure with a porosity of 80% to 86% and achieved an improved compressive strength mimicking that of cancellous bone. The addition of CO3Ap coupled with the fully interconnected microstructure of the α-TCP scaffolds coated with CO3Ap/PCL increased cell attachment, accelerated proliferation and resulted in greater alkaline phosphatase (ALP) activity. Hence, our bone substitute exhibited promising potential for applications in cancellous bone-type replacement.

Modulated release from liposomes entrapped in chitosan/gelatin hydrogels

The paper describes the preparation of chitosan/gelatin hydrogels, obtained by double crosslinking with glutaraldehyde and sodium sulphate/sodium tripolyphosphate that may be used as matrices for the inclusion of drug loaded liposomes composed of phosphatidylcholine. The main objective was to create a protective layer to stabilize the liposomal surface and to prolong/control the release of drugs from such systems. Therefore, complex systems capable of prolonged drug release and controlled release kinetics were obtained. Samples consisting of different chitosan/gelatin ratios and type/amount of ionic crosslinker have been prepared and characterized. The present study shows that calcein (used as a model hydrophilic drug) release from polymeric hydrogels has been retarded from several days to weeks after calcein inclusion in small unilamellar vesicles (SUVs) and multilamellar vesicles (MLVs) entrapped subsequently in hydrogels with variable composition. The calcein release kinetics of complex systems were compared to simple systems (control hydrogels) and important changes were observed thus proving that the mechanism of the process increases in complexity. Also, it is demonstrated that liposomes' stability can be greatly improved by inclusion in polymeric matrices. Multilamellar liposomes showed a better release behaviour, which indicates that these calcein loaded vesicles remained intact to some extent after release from the matrix, due to their improved stability provided by the multiple layers. When small unilamellar liposomes were tested, calcein have been released from hydrogels predominantly in a free form (due to their unilamellarity related instability even inside the hydrogel) but in a sustained and controllable manner. The main applications of the systems obtained are in the area of drug release for tissue engineering/tissue repair (topical administration of drugs for wound therapy - burns, for example). Hydrogels capable of delivering drugs over prolonged periods of time represent a step forward in wound management and many diseases that request long term and sustained delivery of drugs. These hydrogels could be used as tissue replacement or injectable depot systems in many high risk diseases including cancer.