Application of molecularly imprinted polymers to solid-phase extraction of analytes from real samples

Molecularly imprinted electrochemical sensor based on APTES-functionalized indium tin oxide electrode for the determination of sulfadiazine

An electrochemical sensor was developed for the sensitive and selective detection of sulfadiazine (SDZ), based on a molecularly imprinted polymer (MIP) film formed on an indium tin oxide (ITO) electrode through a self-assembly process. The SDZ-imprinted ITO electrode (SDZ-MIP/APTES-ITO) was prepared through in situ polymerization using sulfadiazine, methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), and 2,2'-azobisisobutyronitrile (AIBN) as the template, functional monomer, cross-linker, and initiator respectively. Before polymerization, the ITO electrode was functionalized with 3-aminopropyltriethoxysilane (APTES) to promote covalent attachment of the polymer to the electrode. After polymerization, the template molecule SDZ was removed to create selective recognition sites, forming the molecularly imprinted polymer electrode (MIP/APTES-ITO), which facilitates sulfadiazine detection. The sensor's performance was evaluated using cyclic and differential pulse voltammetry, demonstrating a linear response in the sulfadiazine concentration range 0.1 to 300 μM, with a detection limit of 0.11 μM. The MIP-based sensor exhibited good reproducibility, repeatability, selectivity, and stability in sulfadiazine detection. Its practical applicability was confirmed by the successful quantification of sulfadiazine in spiked milk samples.

Novel dummy molecularly imprinted polymer for simultaneous solid-phase extraction of stanozolol metabolites from urine

Stanozolol, a synthetic derivative of testosterone, is one of the common doping drugs among athletes and bodybuilders. It is metabolized to a large extent and metabolites are detected in urine for a longer duration than the parent compound. In this study, a novel dummy molecularly imprinted polymer (DMIP) is developed as a sorbent for solid-phase extraction of stanozolol metabolites from spiked human urine samples. The optimized DMIP is composed of stanozolol as the dummy template, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross-linker in a ratio of 1:10:80. The extracted analytes were quantitively determined using a newly developed and validated ultrahigh-performance liquid chromatography tandem mass spectrometry method, where the limits of detection and quantitation were 0.91 and 1.81 ng mL-1, respectively, fulfilling the minimum required performance limit decided on by the World Anti-Doping Agency. The mean percentage extraction recoveries for 3'-hydroxystanozolol, 4β-hydroxystanozolol, and 16β-hydroxystanozolol are 97.80% ± 13.80, 83.16% ± 7.50, and 69.98% ± 2.02, respectively. As such, the developed DMISPE can serve as an efficient cost-effective tool for doping and regulatory agencies for simultaneous clean-up of the stanozolol metabolites prior to their quantification.

Selective Extraction of Diazepam and Its Metabolites from Urine Samples by a Molecularly Imprinted Solid-Phase Extraction (MISPE) Method

In this research, a molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization using oxazepam (OZ) as a template molecule and was subsequently applied as a selective sorbent for the extraction of diazepam (DZP) and its metabolites in urine samples using an SPE cartridge. OZ, temazepam (TZ), nordiazepam (NZ) and DZP were analyzed in the final extracts by high-performance liquid chromatography with diode array detection (HPLC-DAD). The SPE extraction steps were optimized, and the evaluation of an imprinting factor was carried out. The selectivity of the method for OZ versus structurally related benzodiazepines (BZDs), such as bromazepam (BRZ), tetrazepam (TTZ) and halazepam (HZ), was investigated. Under the optimum conditions, the proposed methodology provided good linearity in the range of 10-1500 ng/mL, with limit of detection values between 13.5 and 21.1 ng/mL and recovery levels for DZP and its metabolites from 89.0 to 93.9% (RSD ≤ 8%) at a concentration level of 1000 ng/mL. The proposed method exhibited good selectivity, precision and accuracy and was applied to the analysis of urine samples from a real case of DZP intake.

Molecularly Imprinted Polymer-Coated CdTe Quantum Dots for Fluorometric Detection of Sulfonamide Antibiotics in Food Samples

This work reports the development and application of a highly selective core@shell-based quantum dot-molecularly imprinted polymer (QD@MIP) sensor for the detection of sulfadiazine (SDZ)-an antibiotic which belongs to the sulfonamide family. The synthesis of the smart material or MIP (molecularly imprinted polymer) was carried out by a precipitation method directly on the quantum dot surface, which played the role of a fluorescent probe in the optical sensor. The synthesized polymer was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Fluorescence experiments were performed in order to evaluate the effects of pH, interaction time of the QD@MIP with the analyte and SDZ concentration in different matrices. Under optimized conditions, a linear concentration range of 10.0-60.0 ppm and a limit of detection of 3.33 ppm were obtained. The repeatability and reproducibility of the proposed QD@MIP were evaluated in terms of the RSD, where RSD values of less than 5% were obtained in both tests. Selectivity studies were carried out in the presence of four possible interfering substances with quenching properties, and the signals obtained for these interferents confirmed the excellent selectivity of the proposed sensor; the imprinting factor value obtained for SDZ was 1.64. Finally, the proposed sensor was applied in real animal-based food samples using a spiked concentration of SDZ, where the recovery values obtained were above 90% (experiments were performed in triplicate).

Advancing the use of molecularly imprinted polymers in bioanalysis: the selective extraction of cotinine in human urine

Aim: To characterize a molecularly imprinted polymer via precipitation polymerization for the extraction of cotinine in urine. Methods: The polymer was created via precipitation polymerization. Physical characteristics of the polymer were assessed via scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The polymer adsorption capacity was assessed and an solid-phase extraction method from urine by LC-MS/MS was developed. Results: The polymer had small, spherical morphology and little thermal decomposition. The extraction method yielded cotinine recoveries of 77-103% in urine. The molecularly imprinted polymer adsorption capacity for cotinine was 448.2 ± 2.1 μg/mg. Common interferants did not affect cotinine's extraction. Conclusion: The resulting polymer was determined to be specific for cotinine and can be used for the detection of cotinine in urine for clinical samples.

Recent molecularly imprinted polymers applications in bioanalysis

Molecular imprinted polymers (MIPs) as extraordinary compounds with unique features have presented a wide range of applications and benefits to researchers. In particular when used as a sorbent in sample preparation methods for the analysis of biological samples and complex matrices. Its application in the extraction of medicinal species has attracted much attention and a growing interest. This review focus on articles and research that deals with the application of MIPs in the analysis of components such as biomarkers, drugs, hormones, blockers and inhibitors, especially in biological matrices. The studies based on MIP applications in bioanalysis and the deployment of MIPs in high-throughput settings and optimization of extraction methods are presented. A review of more than 200 articles and research works clearly shows that the superiority of MIP techniques lies in high accuracy, reproducibility, sensitivity, speed and cost effectiveness which make them suitable for clinical usage. Furthermore, this review present MIP-based extraction techniques and MIP-biosensors which are categorized on their classes based on common properties of target components. Extraction methods, studied sample matrices, target analytes, analytical techniques and their results for each study are described. Investigations indicate satisfactory results using MIP-based bioanalysis. According to the increasing number of studies on method development over the last decade, the use of MIPs in bioanalysis is growing and will further expand the scope of MIP applications for less studied samples and analytes.

Recent advances in polymer composite, extraction, and their application for wastewater treatment: A review

Wastewater from diverse industrial sectors, agricultural practices and other household activities causes water pollution that result in different environmental issues. The main goals of wastewater treatment are typically to enhance the purity of wastewater and to enable the disposal of domestic and industrial effluents without endangering human health or causing excessive environmental issues. There were several natural and synthetic materials which have been utilized for wastewater treatment, amongst them polymers gain more importance due to their non-toxicity, economic feasibility, abundant availability of sources, renewability, biocompatibility, biodegradability, etc. The organic polymers such as cellulose, chitin, gelatin, alginates, lignin, dextran and other starch derivatives are the most commonly used natural polymers in wastewater treatments. The unique physical and chemical characteristics of the natural polymers make them become an alternative in wastewater treatments such as membrane filtration, adsorption, coagulation, flocculation and ion-exchange process to remove harmful contaminants such as toxic metals, dyes, medicines, pesticides, and so on. The review article discusses natural polymers and related uses in wastewater treatment. This review mainly focused on the wastewater treatment using natural polymers and the techniques involved for their extraction from natural sources. The recent trends in polymer extraction from the natural sources and the scope for the future research of natural polymers in various sectors are also discussed in detail.

A review on carbon-based molecularly-imprinted polymers (CBMIP) for detection of hazardous pollutants in aqueous solutions

This article discusses the unique properties and performance of carbon-based molecularly-imprinted polymers (MIPs) for detecting hazardous pollutants in aqueous solutions. Although MIPs have several advantages such as specific recognition sites, selectivity, and stability, they suffer from a series of drawbacks, including loss of conductivity, electrocatalytic activity, and cost, which limit their use in various fields. Carbon-based MIPs, which utilize carbon electrodes, carbon nanoparticles, carbon dots, carbon nanotubes, and graphene substrates, have been the focus of research in recent years to enhance their properties and remove their weaknesses as much as possible. These carbon-based nanomaterials have excellent sensitivity and specificity for molecular identification. As a result, they have been widely used in various applications, such as assessing the environmental, biological, and food samples. This article examines the growth of carbon-based MIPs and their environmental applications.

Solid-Phase Extraction of Active Compounds from Natural Products by Molecularly Imprinted Polymers: Synthesis and Extraction Parameters

Molecularly imprinted polymers (MIPs) are synthetic polymers with a predetermined selectivity for a particular analyte or group of structurally related compounds, making them ideal materials for separation processes. Hence, in sample preparation, MIPs are chosen as an excellent material to provide selectivity. Moreover, its use in solid-phase extraction, also referred to as molecular imprinted solid phase extraction (MISPE), is well regarded. In recent years, many papers have been published addressing the utilization of MIPs or MISPE as sorbents in natural product applications, such as synthesis. This review describes the synthesis and characterization of MIPs as a tool in natural product applications.

Application of Molecularly Imprinted Polymers in the Analysis of Waters and Wastewaters

The increase of the global population and shortage of renewable water resources urges the development of possible remedies to improve the quality and reusability of waste and contaminated water supplies. Different water pollutants, such as heavy metals, dyes, pesticides, endocrine disrupting compounds (EDCs), and pharmaceuticals, are produced through continuous technical and industrial developments that are emerging with the increasing population. Molecularly imprinted polymers (MIPs) represent a class of synthetic receptors that can be produced from different types of polymerization reactions between a target template and functional monomer(s), having functional groups specifically interacting with the template; such interactions can be tailored according to the purpose of designing the polymer and based on the nature of the target compounds. The removal of the template using suitable knocking out agents renders a recognition cavity that can specifically rebind to the target template which is the main mechanism of the applicability of MIPs in electrochemical sensors and as solid phase extraction sorbents. MIPs have unique properties in terms of stability, selectivity, and resistance to acids and bases besides being of low cost and simple to prepare; thus, they are excellent materials to be used for water analysis. The current review represents the different applications of MIPs in the past five years for the detection of different classes of water and wastewater contaminants and possible approaches for future applications.

Biomimetic Sensors to Detect Bioanalytes in Real-Life Samples Using Molecularly Imprinted Polymers: A Review

Molecularly imprinted polymers (MIPs) come with the promise to be highly versatile, useful artificial receptors for sensing a wide variety of analytes. Despite a very large body of literature on imprinting, the number of papers addressing real-life biological samples and analytes is somewhat limited. Furthermore, the topic of MIP-based sensor design is still, rather, in the research stage and lacks wide-spread commercialization. This review summarizes recent advances of MIP-based sensors targeting biological species. It covers systems that are potentially interesting in medical applications/diagnostics, in detecting illicit substances, environmental analysis, and in the quality control of food. The main emphasis is placed on work that demonstrates application in real-life matrices, including those that are diluted in a reasonable manner. Hence, it does not restrict itself to the transducer type, but focusses on both materials and analytical tasks.

Surface molecularly imprinted polymers fabricated by differential UV-vis spectra and reverse prediction method for the enrichment and determination of sterigmatocystin

A novel magnetic molecularly imprinted polymers (MMIPs) with a new functional monomer Triallyl isocyanurate was synthesized successfully to enrich and detect sterigmatocystin (STG) in wheat samples. The differential UV-vis spectra and the reverse prediction method were selected to achieve the optimal synthesis conditions of the MMIPs, which were characterized well. The adsorption experiment showed that MMIPs have high selectivity and sensitivity. A magnetic solid phase extraction combined with high performance liquid chromatography (MSPE-HPLC) method based on the MMIPs was successfully established with the optimal extraction condition. The linear range and RSD were 1.8-25 ng·g^-1 and 2.6-4.1%, respectively. The recovery of this method was 87.6-96.9% and the limit of detection (LOD) was 0.63 ng·g^-1. The excellent sensitivity and selectivity of this method were confirmed by experiment of the extraction and detection of STG in wheat extracts. This work extends the use of molecular imprinting in mycotoxins applications.

Environmental impact of molecularly imprinted polymers used as analyte sorbents in mass spectrometry

The molecularly imprinted polymers (MIPs) with the following herbicides used as templates 2,4-dichlorophenoxyacetic acid (2,4-D) or 4-chloro-2-methylphenoxy- acetic acid (MCPA) were synthesized by precipitation polymerization technique using 4-vinylpyridine (4-VP) as a functional monomer, ethylene glycol dimethacrylate (EGDMA) as a cross-linking agent, and 2,2'-azobisisobutyronitrile (AIBN) as an initiator in methanol solvent. For the flavonoid MIPs, rutin (Ru) and quercetin (Q) were used as templates and synthesized via a similar technique, utilizing acrylamide (AA) as a functional monomer. Analysis of binding in the molecularly imprinted and non-imprinted polymer (NIP) has proved that MIP shows a higher affinity towards the analytes, compared to NIP. MIP was used to determine analytes in water using the Flowing Atmospheric-Pressure Afterglow Mass Spectrometry (FAPA-MS) technique. In this approach, the method limit of detection (MLOD) of 2,4-D, MCPA, Ru, and Q in MIP was 4, 3, 10, and 5 μg in 1 g MIP, respectively. The release kinetics of the analytes from MIP and their stability in water was studied. The cultures of Tetradesmus obliquus (Turpin) M.J. Wynne and Daphnia magna Straus were used for in vivo toxicity studies revealing that only Ru-MIP and Q-MIP had negative effect on the living organisms used in the bioassays.

Nanoplatform-Integrated Miniaturized Solid-Phase Extraction Techniques: A Critical Review

Preparation of the biological samples is one of the most critical steps in sample analysis. In past decades, the liquid-liquid extraction technique has been used to extract the desired analytes from complex biological matrices. However, solid-phase extraction (SPE) gained popularity due to versatility, simplicity, selectivity, reproducibility, high sample recovery %, solvent economy, and time-saving nature. The superior extraction efficiency of SPE can be attributed to the development of advanced techniques, including the nanosorbents technology. The nanosorbent technology significantly simplified the sample preparation, improved the selectivity, diversified the application, and accelerated the sample analysis. This review critically expands on the to-date advancements reported in SPE with particular regards to the nanosorbent technology.

Microsphere molecularly imprinted solid-phase extraction for diazepam analysis using itaconic acid as a monomer in propanol

Diazepam (DZP) is a benzodiazepine drug used as an anti-drug and sedative. It is often misused to induce or create euphoria in combination with other drugs (high or fly sensation) or administered alone. So far, screening for DZP abuse with sensitive analytical methods is needed, as its small concentrations make it difficult to detect. Increased sensitivity of the analytical method can be obtained by using a preparation method that selectively separates the analyte from the sample matrix. Molecularly imprinted polymer (MIP) is one of the preparation solutions with good selectivity, specificity, and sensitivity. MIP was made from DZP as a template, itaconic acid, and ethylene glycol dimethacrylate in a composition of 1:4:20. MIP was made by precipitation polymerisation to obtain microsphere polymer type. MIP had a binding capacity value of 0.0557 mg/g and followed the Freundlich isotherm. Application of the microsphere MIP on spiked blood serum resulted in a recovery of 105.63 ± 1.0% for MIP compared to 21.28 ± 0.4% for non-imprinted polymer, with the imprinting factor value reaching 4.96. Hence, MIP DZP with itaconic acid as a functional monomer and propanol as a porogen, fabricated by the precipitation polymerisation method, is a promising sorbent for DZP extraction in biological fluids.

Growing Trends in the Efficient and Selective Extraction of Compounds in Complex Matrices Using Molecularly Imprinted Polymers and Their Relevance to Toxicological Analysis

In the world of forensic and clinical toxicology, proper sample preparation is one of the key steps in identification and quantification of drugs of abuse. Traditional extraction methods such as solid-phase extraction and liquid-liquid extraction are often laborious and nonselective for the target analytes being measured. Molecularly imprinted polymers (MIPs) can be synthesized for sample extraction and their versatility allows the polymer to be employed in off-line, benchtop extractions or on/in-line instrument extractions, offering a faster and more selective sample preparation without the risk of interfering matrix effects. This review details the synthesis and applications of MIP materials for the extraction of drug compounds from biological matrices in publications from 1994 to today.

Optimising factors affecting solid phase extraction performances of molecular imprinted polymer as recent sample preparation technique

Molecular imprinted solid-phase extraction is the technique that uses molecular imprinted polymer as the sorbent in solid phase extraction. Molecular imprinted solid-phase extraction is effective and efficient for the extraction process and cleaning as compared with solid phase extraction (SPE) without molecular imprinted polymer. The complexity of variables in molecular imprinted solid-phase extraction arise as problems in the analysis, therefore it is necessary to optimize the extraction conditions of molecular imprinted solid-phase extraction. To achieve the sorption equilibrium and achieve the shortest time, certain parameters such as contact time, ion strength of sample, pH of sample, amount of sorbent, sample flow rate, addition of salt and buffer solution, washing solvent, elution solvent, and loading solvent need to be optimized. The selection of suitable properties and quantities of each factor greatly affect the formation of appropriate interactions between the sorbent and analytes. Percentage recovery is also influenced by formation of the appropriate bonds, sample flow rates, extraction time, salt addition, and sorbent mass. Therefore, in the future, molecular imprinted solid-phase extraction optimization has to consider and adjust various factors reviewed in this paper to form appropriate interactions between the absorbent and target molecules which have an impact on the optimal results.

Molecularly imprinted polymers for selective extraction of rosmarinic acid from Rosmarinus officinalis L

This study provides a robust and reproducible approach for selective extraction of rosmarinic acid (RA) using molecularly imprinted polymers (MIPs). Computational modeling and UV spectroscopic analysis were performed to optimize MIP synthesis. Consequently, six different bulk and surface imprinted polymers were generated using RA as the template. Binding performance of the imprinted polymers was evaluated using static equilibrium and complementary dynamic rebinding experiments. Despite the high selectivity of thus generated surface imprinted polymers, the corresponding bulk polymers exhibited better binding performance when serving as sorbents during solid phase extraction (SPE). An optimized molecularly imprinted solid phase extraction (MISPE) protocol was developed in respect to loaded amount of RA, composition of the loading solution, washing solvent, and elution volume. Thereby, a remarkably selective extraction of RA from real-world Rosmarinus officinalis L. extract with a recovery rate and purity of 81.96 ± 6.33% and 80.59 ± 0.30%, respectively, was achieved.

Determination of bisphenol A in canned food by microwave assisted extraction, molecularly imprinted polymer-solid phase extraction and liquid chromatography-mass spectrometry

Bisphenol A (BPA), a known potential endocrine disrupting compound (EDC) is expected to be present in low quantities in canned food due to its migration from the inner surface coating of cans made of epoxy resins. A selective and confirmatory analytical method, based on microwave assisted extraction (MAE), molecularly imprinted solid phase extraction (MISPE) using a polymer prepared by a non-covalent molecular imprinting technique and liquid chromatography coupled with electrospray ionization mass spectrometry (LC-ESI/MS) was developed for the determination of BPA in canned pineapple, tuna and mushrooms. First, the effect of the loading medium of hydro- organic solutions on the binding of BPA and its deuterated analogue on the MISPE sorbent was investigated. Subsequently, the effects of the experimental conditions of the microwave assisted extraction (solvent, sample mass/solvent volume, time and temperature) on the obtained recovery of BPA from canned food were assessed and the parameters were optimized to provide maximum recovery and selectivity. It was demonstrated that the combination of MAE with MISPE permits the use of a selective extraction solvent (methanol/water, 4/6, v/v), simplifying the sample preparation steps and enhancing sample clean-up of complex food matrices. The method was validated in different food matrices, using BPA-d16 as internal standard and quantitative relative recoveries were determined. The precision (RSD %) of the method ranged from 7% to 10% and the limit of detection was at low ng/g level for all food matrices. The determined concentration of BPA in commercial canned samples ranged between 7.3 and 42.3 ng/g.

Preparation and applications of electrochemical chemosensors based on carbon-nanomaterial-modified molecularly imprinted polymers

The past few decades have witnessed a rapid development in electrochemical chemosensors (ECCSs). The integration of carbon nanomaterials (CNMs) and molecularly imprinted polymers (MIPs) has endowed ECCSs with high selectivity and sensitivity toward target detection. Due to the integrated merits of MIPs and CNMs, CNM-modified MIPs as ECCSs have been widely reported and have excellent detection applications. This review systematically summarized the general categories, preparation strategies, and applications of ECCSs based on CNM-modified MIPs. The categories include CNM-modified MIPs often hybridized with various materials and CNM-encapsulated or CNM-combined imprinting silica and polymers on working electrodes or other substrates. The preparation strategies include the polymerization of MIPs on CNM-modified substrates, co-polymerization of MIPs and CNMs on substrates, drop-casting of MIPs on CNM-modified substrates, self-assembly of CNMs/MIP complexes on substrates, and so forth. We discussed the in situ polymerization, electro-polymerization, and engineering structures of CNM-modified MIPs. With regard to potential applications, we elaborated the detection mechanisms, signal transducer modes, target types, and electrochemical sensing of targets in real samples. In addition, this review discussed the present status, challenges, and prospects of CNM-modified MIP-based ECCSs. This comprehensive review is desirable for scientists from broad research fields and can promote the further development of MIP-based functional materials, CNM-based hybrid materials, advanced composites, and hybrid materials.

Synthesis and application of ion-imprinted polymer for the determination of mercury II in water samples

In this study, an innovative analytical methodology capable of selectively identifying and quantifying mercury contamination by the association of solid-phase extraction using ion-imprinted polymers as a sorbent phase and differential pulse anodic stripping voltammetry is proposed. To this end, the ion-imprinted polymers were synthesized and characterized by infrared spectroscopy and atomic force microscopy. The sorption capacities and the selectivity of the ion-imprinted polymers were compared to the ones related to the non-imprinted ones. Next, the experimental parameters of this solid-phase extraction method (IIP-SPE) were evaluated univariately. The selectivity of this polymeric matrix against other cations (Cd II, Pb II, and Cu II) was also evaluated. Limits of detection (LOD) and quantification (LOQ) obtained for the here proposed methodology were 0.322 μg L^-1 and 1.08 μg L^-1, respectively. Also, the precision of 4.0% was achieved. The method was finally applied to three water samples from different sources: for the Piratininga and Itaipu Lagoon waters, Hg II concentrations were below the LOQ and for Vargem River waters a concentration equal to 1.35 ± 0.07 mg L^-1 was determined. These results were confirmed by recovery tests, resulting in a recovery of 96.2 ± 4.0%, and by comparison with flame atomic absorption spectrometry, resulting in statistical conformity between the two methods at 95% confidence level.

Synthesis of molecularly imprinted nanoparticles for selective exposure assessment of permethrin: optimization by response surface methodology

BACKGROUND

Extensive use of high-efficiency pyrethroid pesticides as pest-control agents lead to remarkable adsorption and release of these materials in soil and aquatic environment which could have serious adverse effects on water and food chain quality as well as human health. In this study, a molecularly imprinted polymer was synthesized and used as a selective sorbent in the sample preparation procedure in order to facilitate sensitive and quantitative exposure assessment of insecticide permethrin.

METHODS

Molecular imprinted nanoparticles were prepared by precipitation polymerization technique using 1:4:20 mmol ratio of the template, functional monomer, and cross-linker, respectively, as well as 80 mL of chloroform as progen solvent. The obtained nanoparticles were characterized by field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectrometry (FT-IR). The optimization of critical variables in the MISPE process was done using the central composite design (CCD) of the response surface methodology.

RESULTS

Quadratic regressional models were developed to correlate the response and independent variables and the analysis of variance (ANOVA) verified the excellent fitting of proposed models for experimental data. Optimum conditions for the highest MISPE yield were selected as follow: sorbent mass of 7.71 mg, sample pH 5.58 and 5.68 for cis and trans-permethrin, respectively, sample flow rate of 0.6 mL/min, as well as 5 and 3.94 mL of methanol/acetic acid at the flow rate of 2 mL/min as elution solvents for cis and trans-permethrin, respectively. Under optimized conditions, the linear range was obtained 20-120 μg/L (R2 = 0.99) and the detection limits were 5.51 and 5.72 μg/L for cis and trans-permethrin, respectively. Analysis of real samples demonstrated the high extraction efficiency of designed protocol ranging from 93.01 to 97.14 with the relative standard deviation (RSD) less than 4.51%.

CONCLUSIONS

The satisfactory results confirmed the reliability and efficiency of the proposed method for trace analysis of permethrin isomers in biological and environmental samples.

Electrochemical sensor based on molecularly imprinted polymer for sensitive triclosan detection in wastewater and mineral water

Triclosan (TCS) is a topical antiseptic widely used in different cosmetic products. It is also a common additive in many antimicrobial household consumables. Over a certain concentration, it becomes risky for human and environmental health. This work describes the development of an electrochemical sensor based on molecularly imprinted polymer (MIP), assembled on screen-printed gold electrode (Au-SPE), dedicated to the TCS detection in environmental water sources. To achieve this goal, an acrylamide/bisacrylamide solution was polymerized after linking TCS with the carboxylic polyvinyl chloride (PVC-COOH) layer onto the Au-SPE. The sensor device fabrication and its retention capabilities were characterized through cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM) and Fourier transform infrared (FTIR) spectroscopy. As control experiment, negligible responses were obtained during the non-imprinted polymer (NIP) test. The sensor could effectively detect TCS avoiding interferences of structural similar substances like 2,4,6-trichlorophenol and catechol. Under optimal conditions, the sensor responses were found logarithmic in the concentration range from 0.1 to 1000 pg mL^-1. Indeed, compared with reported works, this sensor exhibits lower detection limit (LOD) and quantification limit (LOQ) of 0.23 and 0.78 pg mL^-1, respectively. The developed sensor was effectively applied to wastewater samples for TCS detection and displayed satisfactory performances. Moreover, the different wastewater samples, regarding their TCS contents, were correctly classified by using principal component analysis (PCA) technique. Correspondingly, this work has demonstrated a cheap, simple and effective sensing platform for TCS detection thus making it a promising tool for future evolution of accurate and reliable environmental analysis.

Synthesis and Application of Novel Molecularly Imprinted Solid Phase Extraction Materials Based on Carbon Nanotubes for Determination of Carbofuran in Human Serum by High Performance Liquid Chromatography

Novel molecularly imprinted polymers (MIPs) based on multiwalled carbon nanotubes (MWNTs) were synthesized using carbofuran as template, methacrylic acid as functional monomer, and trimethylolpropane trimethacrylate as cross-liking agent, respectively. Characterization results showed that the carbofuran MIPs have been successfully grafted onto the surface of MWNTs as a thin layer with high stability. The results of adsorption dynamics indicated that the synthesized MWNT-MIPs displayed a biphase adsorption profile and good selective recognition to carbofuran with equilibrium adsorption of 106.2 mg/g. The MWNTs-MIPs synthesized were further applied as the adsorbent material of solid-phase extraction (SPE) for the pretreatment of carbofuran in human serum, analyzed using high performance liquid chromatograph (HPLC). The recoveries obtained ranged from 89.0 ± 4.8 to 93.6 ± 3.2, showing that the MWNTs-MIPs-SPE system developed have specific recognition toward carbofuran. Results above indicated that the proposed system filled with synthesized MWNTs-MIPs provided a fast and selective extraction of carbofuran in serum.