Modification of β-oxidation pathway in Ralstonia eutropha for production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from soybean oil

Identification of Oil-Loving Cupriavidus necator BM3-1 for Polyhydroxyalkanoate Production and Assessing Contribution of Exopolysaccharide for Vegetable Oil Utilization

Polyhydroxyalkanoates (PHA) have received attention owing to their biodegradability and biocompatibility, with studies exploring PHA-producing bacterial strains. As vegetable oil provides carbon and monomer precursors for poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx)), oil-utilizing strains may facilitate PHA production. Herein, Cupriavidus necator BM3-1, which produces 11.1 g/L of PHB with 5% vegetable oil, was selected among various novel Cupriavidus necator strains. This strain exhibited higher preference for vegetable oils over sugars, with soybean oil and tryptone determined to be optimal sources for PHA production. BM3-1 produced 33.9 g/L of exopolysaccharides (EPS), which was three-fold higher than the amount produced by H16 (10.1 g/L). EPS exhibited 59.7% of emulsification activity (EI24), higher than that of SDS and of EPS from H16 with soybean oil. To evaluate P(3HB-co-3HHx) production from soybean oil, BM3-1 was engineered with P(3HB-co-3HHx) biosynthetic genes (phaCRa, phaARe, and phaJPa). BM3-1/pPhaCJ produced 3.5 mol% of 3HHx and 37.1 g/L PHA. BM3-1/pCB81 (phaCAJ) produced 32.8 g/L PHA, including 5.9 mol% 3HHx. Physical and thermal analyses revealed that P(3HB-co-5.9 mol% 3HHx) was better than PHB. Collectively, we identified a novel strain with high vegetable oil utilization capacity for the production of EPS, with the option to engineer the strain for P(3HB-co-3HHx).

Matching the β-oxidation gene repertoire with the wide diversity of fatty acids

Bacteria can use fatty acids (FAs) from their environment as carbon and energy source. This catabolism is performed by the enzymes of the well-known β-oxidation machinery, producing reducing power and releasing acetyl-CoA that can feed the tricarboxylic acid cycle. FAs are extremely diverse: they can be saturated or (poly)unsaturated and are found in different sizes. The need to degrade such a wide variety of compounds may explain why so many seemingly homologous enzymes are found for each step of the β-oxidation cycle. In addition, the degradation of unsaturated fatty acids requires specific auxiliary enzymes for isomerase and reductase reactions. Furthermore, the β-oxidation cycle can be blocked by dead-end products, which are taken care of by acyl-CoA thioesterases. Yet, the functional characterization of the enzymes required for the degradation of the full diversity of FAs remains to be documented in most bacteria.

Microaerobic insights into production of polyhydroxyalkanoates containing 3-hydroxyhexanoate via native reverse β-oxidation from glucose in Ralstonia eutropha H16

BACKGROUND

Ralstonia eutropha H16, a facultative chemolitoautotroph, is an important workhorse for bioindustrial production of useful compounds such as polyhydroxyalkanoates (PHAs). Despite the extensive studies to date, some of its physiological properties remain not fully understood.

RESULTS

This study demonstrated that the knallgas bacterium exhibited altered PHA production behaviors under slow-shaking condition, as compared to its usual aerobic condition. One of them was a notable increase in PHA accumulation, ranging from 3.0 to 4.5-fold in the mutants lacking of at least two NADPH-acetoacetyl-CoA reductases (PhaB1, PhaB3 and/or phaB2) when compared to their respective aerobic counterpart, suggesting the probable existence of (R)-3HB-CoA-providing route(s) independent on PhaBs. Interestingly, PHA production was still considerably high even with an excess nitrogen source under this regime. The present study further uncovered the conditional activation of native reverse β-oxidation (rBOX) allowing formation of (R)-3HHx-CoA, a crucial precursor for poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)], solely from glucose. This native rBOX led to the natural incorporation of 3.9 mol% 3HHx in a triple phaB-deleted mutant (∆phaB1∆phaB1∆phaB2-C2). Gene deletion experiments elucidated that the native rBOX was mediated by previously characterized (S)-3HB-CoA dehydrogenases (PaaH1/Had), β-ketothiolase (BktB), (R)-2-enoyl-CoA hydratase (PhaJ4a), and unknown crotonase(s) and reductase(s) for crotonyl-CoA to butyryl-CoA conversion prior to elongation. The introduction of heterologous enzymes, crotonyl-CoA carboxylase/reductase (Ccr) and ethylmalonyl-CoA decarboxylase (Emd) along with (R)-2-enoyl-CoA hydratase (PhaJ) aided the native rBOX, resulting in remarkably high 3HHx composition (up to 37.9 mol%) in the polyester chains under the low-aerated condition.

CONCLUSION

These findings shed new light on the robust characteristics of Ralstonia eutropha H16 and have the potential for the development of new strategies for practical P(3HB-co-3HHx) copolyesters production from sugars under low-aerated conditions.

Maximization of 3-hydroxyhexanoate fraction in poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) using lauric acid with engineered Cupriavidus necator H16

As polyhydroxybutyrate (P(3HB)) was struggling with mechanical properties, efforts have been directed towards increasing mole fraction of 3-hydroxyhexanoate (3HHx) in P(3HB-co-3HHx) to improve the properties of polyhydroxyalkanoates (PHAs). Although genetic modification had significant results, there were several issues related to cell growth and PHA production by deletion of PHA synthetic genes. To find out easier strategy for high 3HHx mole fraction without gene deletion, Cupriavidus necator H16 containing phaC2Ra-phaACn-phaJ1Pa was examined with various oils resulting that coconut oil gave the highest 3HHx mole fraction. When fatty acid composition analysis with GC-MS was applied, coconut oil was found to have very different composition from other vegetable oil containing very high lauric acid (C12) content. To find out specific fatty acid affecting 3HHx fraction, different fatty acids from caproic acid (C6) to stearic acid (C18) was evaluated and the 3HHx mole fraction was increased to 26.5 ± 1.6 % using lauric acid. Moreover, the 3HHx mole fraction could be controlled from 9 % to 31.1 % by mixing bean oil and lauric acid with different ratios. Produced P(3HB-co-3HHx) exhibited higher molecular than P(3HB-co-3HHx) from phaB-deletion mutant. This study proposes another strategy to increase 3HHx mole fraction with easier way by modifying substrate composition without applying deletion tools.

(R/S)-lactate/2-hydroxybutyrate dehydrogenases in and biosynthesis of block copolyesters by Ralstonia eutropha

Bacterial polyhydroxyalkanoates (PHAs) are promising bio-based biodegradable polyesters. It was recently reported that novel PHA block copolymers composed of (R)-3-hydroxybutyrate (3HB) and (R)-2-hydroxybutyrate (2HB) were synthesized by Escherichia coli expressing PhaCAR, a chimeric enzyme of PHA synthases derived from Aeromonas caviae and Ralstonia eutropha. In this study, the sequence-regulating PhaCAR was applied in the natural PHA-producing bacterium, R. eutropha. During the investigation, (R/S)-2HB was found to exhibit strong growth inhibitory effects on the cells of R. eutropha. This was probably due to formation of excess 2-ketobutyrate (2KB) from (R/S)-2HB and the consequent L-valine depletion caused by dominant L-isoleucine synthesis attributed to the excess 2KB. Deletion analyses for genes of lactate dehydrogenase homologs identified cytochrome-dependent D-lactate dehydrogenase (Dld) and [Fe-S] protein-dependent L-lactate dehydrogenase as the enzymes responsible for sensitivity to (R)-2HB and (S)-2HB, respectively. The engineered R. eutropha strain (phaCAR+, ldhACd-hadACd+ encoding clostridial (R)-2-hydroxyisocaproate dehydrogenase and (R)-2-hydoroxyisocaproate CoA transferase, ∆dld) synthesized PHA containing 10 mol% of 2HB when cultivated on glucose with addition of sodium (RS)-2HB, and the 2HB composition in PHA increased up to 35 mol% by overexpression phaCAR. The solvent fractionation and NMR analyses showed that the resulting PHAs were most likely to be block polymers consisting of P(3HB-co-3HV) and P(2HB) segments, suggesting that PhaCAR functions as the sequence-regulating PHA synthase independently from genetic and metabolic backgrounds of the host cell. KEY POINTS: (R/S)-2-hydroxubutyrates (2HB) caused l-valine deletion in Ralstonia eutropha (R)- and (S)-lactate/2HB dehydrogenases functional in R. eutropha were identified The engineered R. eutropha synthesized block copolymers of 2HB-containing polyhydroxyalkanoates on glucose and 2HB.

Engineering the biological conversion of formate into crotonate in Cupriavidus necator

To advance the sustainability of the biobased economy, our society needs to develop novel bioprocesses based on truly renewable resources. The C1-molecule formate is increasingly proposed as carbon and energy source for microbial fermentations, as it can be efficiently generated electrochemically from CO2 and renewable energy. Yet, its biotechnological conversion into value-added compounds has been limited to a handful of examples. In this work, we engineered the natural formatotrophic bacterium C. necator as cell factory to enable biological conversion of formate into crotonate, a platform short-chain unsaturated carboxylic acid of biotechnological relevance. First, we developed a small-scale (150-mL working volume) cultivation setup for growing C. necator in minimal medium using formate as only carbon and energy source. By using a fed-batch strategy with automatic feeding of formic acid, we could increase final biomass concentrations 15-fold compared to batch cultivations in flasks. Then, we engineered a heterologous crotonate pathway in the bacterium via a modular approach, where each pathway section was assessed using multiple candidates. The best performing modules included a malonyl-CoA bypass for increasing the thermodynamic drive towards the intermediate acetoacetyl-CoA and subsequent conversion to crotonyl-CoA through partial reverse β-oxidation. This pathway architecture was then tested for formate-based biosynthesis in our fed-batch setup, resulting in a two-fold higher titer, three-fold higher productivity, and five-fold higher yield compared to the strain not harboring the bypass. Eventually, we reached a maximum product titer of 148.0 ± 6.8 mg/L. Altogether, this work consists in a proof-of-principle integrating bioprocess and metabolic engineering approaches for the biological upgrading of formate into a value-added platform chemical.

Polyhydroxyalkanoate production in Pseudomonas putida from alkanoic acids of varying lengths

Many studies have been conducted to produce microbial polyhydroxyalkanoates (PHA), a biopolymer, from Pseudomonas sp. fed with various alkanoic acids. Because this previous data was collected using methodologies that varied in critical aspects, such as culture media and size range of alkanoic acids, it has been difficult to compare the results for a thorough understanding of the relationship between feedstock and PHA production. Therefore, this study utilized consistent culture media with a wide range of alkanoic acids (C7-C14) to produce medium chain length PHAs. Three strains of Pseudomonas putida (NRRL B-14875, KT2440, and GN112) were used, and growth, cell dry weight, PHA titer, monomer distribution, and molecular weights were all examined. It was determined that although all the strains produced similar PHA titers using C7-C9 alkanoic acids, significant differences were observed with the use of longer chain feedstocks. Specifically, KT2440 and its derivative GN112 produced higher PHA titers compared to B-14875 when fed longer chain alkanoates. We also compared several analytical techniques for determining amounts of PHA and found they produced different results. In addition, the use of an internal standard had a higher risk of calculating inaccurate concentrations compared to an external standard. These observations highlight the importance of considering this aspect of analysis when evaluating different studies.

Medium-Chain-Length Fatty Acid Catabolism in Cupriavidus necator H16: Transcriptome Sequencing Reveals Differences from Long-Chain-Length Fatty Acid β-Oxidation and Involvement of Several Homologous Genes

The number of genes encoding β-oxidation enzymes in Cupriavidus necator H16 (synonym, Ralstonia eutropha H16) is high, but only the operons A0459-A0464 and A1526-A1531, each encoding four genes for β-oxidation enzymes, were expressed during growth with long-chain-length fatty acids (LCFAs). However, we observed that C. necator ΔA0459-A0464 ΔA1526-A1531 and C. necator H16 showed the same growth behavior during growth with decanoic acid and shorter FAs. The negative effect of the deletion of these two operons increased with an increasing chain length of the utilized FAs. Transcriptome sequencing (RNA-Seq) revealed the expression profiles of genes involved in the catabolism of medium-chain-length fatty acids (MCFAs) in C. necator H16. Operon A0459-A0464 was expressed only during growth with nonanoic acid, whereas operon A1526-A1531 was highly expressed during growth with octanoic and nonanoic acid. The gene clusters B1187-B1192 and B0751-B0759 showed a log2 fold change in expression of up to 4.29 and 4.02, respectively, during growth with octanoic acid and up to 8.82 and 5.50, respectively, with nonanoic acid compared to sodium gluconate-grown cells. Several acyl-CoA ligases catalyze the activation of MCFAs with coenzyme A (CoA), but fadD3 (A3288), involved in activation of LCFAs, was not detected. The expression profiles of C. necator strain ΔA0459-A0464 ΔA1526-A1531 showed that the growth with nonanoic acid resulted in the expression of further β-oxidation enzyme-encoding genes. Additional insights into the transport of FAs in C. necator H16 revealed the complexity and putative involvement of the DegV-like protein encoded by A0463 in the transport of odd-chain-length FAs and of siderophore biosynthesis in the transport mechanism. IMPORTANCE Although Cupriavidus necator H16 has been used in several studies to produce polyhydroxyalkanoates from various lipids, the fatty acid metabolism is poorly understood. The β-oxidation of long-chain-length FAs has been investigated, but the tremendous number of homologous genes encoding β-oxidation enzymes hides the potential for variances in the expressed genes for catabolism of shorter FAs. The catabolism of medium-chain-length FAs and connected pathways has not been investigated yet. As more sustainable substrates such as lipids and the production of fatty acids and fatty acid derivates become more critical with the dependency on fossil-based substances, understanding the complex metabolism in this highly diverse workhorse for biotechnology, C. necator, is inevitable. For further metabolic engineering and construction of production strains, we investigated the metabolism during growth on medium-chain-length FAs by RNA-Seq.

A review on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] and genetic modifications that affect its production

Polyhydroxyalkanoates (PHAs) have garnered global attention to replace petroleum-based plastics in certain applications due to their biodegradability and sustainability. Among the different types of PHAs, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] copolymer has similar properties to commodity plastics, making them a suitable candidate to replace certain types of single-use plastics, medical devices, and packaging materials. The degradation rate of P(3HB-co-3HHx) is faster than the commercial petroleum-based plastics which take a very long time to be degraded, causing harmful pollution to both land and marine ecosystem. The biodegradability of the P(3HB-co-3HHx) is also dependent on its 3HHx molar composition which in turn influences the crystallinity of the material. Various metabolic pathways like the common PHA biosynthesis pathway, which involves phaA, phaB, and phaC, β-oxidation, and fatty acids de novo synthesis are used by bacteria to produce PHA from different carbon sources like fatty acids and sugars, respectively. There are various factors affecting the 3HHx molar composition of P(3HB-co-3HHx), like PhaCs, the engineering of PhaCs, and the metabolic engineering of strains. It is crucial to control the 3HHx molar composition in the P(3HB-co-3HHx) as it will affect its properties and applications in different fields.

Crystal structure of multi-functional enzyme FadB from Cupriavidus necator: Non-formation of FadAB complex

Cupriavidus necator H16 is a gram-negative chemolithoautotrophic bacterium that has been extensively studied for biosynthesis and biodegradation of polyhydroxyalkanoate (PHA) plastics. To improve our understanding of fatty acid metabolism for PHA production, we determined the crystal structure of multi-functional enoyl-CoA hydratase from Cupriavidus necator H16 (CnFadB). The predicted model of CnFadB created by AlphaFold was used to solve the phase problem during determination of the crystal structure of the protein. The CnFadB structure consists of two distinctive domains, an N-terminal enol-CoA hydratase (ECH) domain and a C-terminal 3-hydroxyacyl-CoA dehydrogenase (HAD) domain, and the substrate- and cofactor-binding modes of these two functional domains were identified. Unlike other known FadB enzymes that exist as dimers complexed with FadA, CnFadB functions as a monomer without forming a complex with CnFadA. Small angle X-ray scattering (SAXS) measurement further proved that CnFadB exists as a monomer in solution. The non-sequential action of FadA and FadB in C. necator appears to affect β-oxidation and PHA synthesis/degradation.

Review of the Developments of Bacterial Medium-Chain-Length Polyhydroxyalkanoates (mcl-PHAs)

Synthetic plastics derived from fossil fuels—such as polyethylene, polypropylene, polyvinyl chloride, and polystyrene—are non-degradable. A large amount of plastic waste enters landfills and pollutes the environment. Hence, there is an urgent need to produce biodegradable plastics such as polyhydroxyalkanoates (PHAs). PHAs have garnered increasing interest as replaceable materials to conventional plastics due to their broad applicability in various purposes such as food packaging, agriculture, tissue-engineering scaffolds, and drug delivery. Based on the chain length of 3-hydroxyalkanoate repeat units, there are three types PHAs, i.e., short-chain-length (scl-PHAs, 4 to 5 carbon atoms), medium-chain-length (mcl-PHAs, 6 to 14 carbon atoms), and long-chain-length (lcl-PHAs, more than 14 carbon atoms). Previous reviews discussed the recent developments in scl-PHAs, but there are limited reviews specifically focused on the developments of mcl-PHAs. Hence, this review focused on the mcl-PHA production, using various carbon (organic/inorganic) sources and at different operation modes (continuous, batch, fed-batch, and high-cell density). This review also focused on recent developments on extraction methods of mcl-PHAs (solvent, non-solvent, enzymatic, ultrasound); physical/thermal properties (Mw, Mn, PDI, Tm, Tg, and crystallinity); applications in various fields; and their production at pilot and industrial scales in Asia, Europe, North America, and South America.

Impact of various β-ketothiolase genes on PHBHHx production in Cupriavidus necator H16 derivatives

Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] (PHBHHx) is a type of biopolyester of the polyhydroxyalkanoate group (PHA). Due to a wide range of properties resulting from the alteration of the (R)-3-hydroxyhexanoate (3HHx) composition, PHBHHx is getting a lot of attention as a substitute to conventional plastic materials for various applications. Cupriavidus necator H16 is the most promising PHA producer and has been genetically engineered to produce PHBHHx efficiently for many years. Nevertheless, the role of individual genes involved in PHBHHx biosynthesis is not well elaborated. C. necator H16 possesses six potential physiologically active β-ketothiolase genes identified by transcriptome analysis, i.e., phaA, bktB, bktC (h16_A0170), h16_A0462, h16_A1528, and h16_B0759. In this study, we focused on the functionality of these genes in vivo in relation to 3HHx monomer supply. Gene deletion experiments identified BktB and H16_A1528 as important β-ketothiolases for C6 metabolism in β-oxidation. Furthermore, in the bktB/h16_A1528 double-deletion strain, the proportion of 3HHx composition of PHBHHx produced from sugar was very low, whereas that from plant oil was significantly higher. In fact, the proportion reached 36.2 mol% with overexpression of (R)-specifc enoyl-CoA hydratase (PhaJ) and PHA synthase. Furthermore, we demonstrated high-density production (196 g/L) of PHBHHx with high 3HHx (32.5 mol%) by fed-batch fermentation with palm kernel oil. The PHBHHx was amorphous according to the differential scanning calorimetry analysis. KEY POINTS: • Role of six β-ketothiolases in PHBHHx biosynthesis was investigated in vivo. • Double-deletion of bktB/h16_A1528 results in high 3HHx composition with plant oil. • Amorphous PHBHHx with 32.5 mol% 3HHx was produced in high density by jar fermenter.

High amounts of medium-chain-length polyhydroxyalkanoates subunits can be accumulated in recombinant Cupriavidus necator with wild-type synthase

Recombinant Cupriavidus necator H16/pMPJAS03, expressing a P. putida KT2440 enoyl-CoA hydratase (phaJ), was able to synthesize short-chain-length/ medium-chain-length (scl-mcl) PHA copolymers with a high content of mcl subunits using its native poly(3-hydroxyalkanoate) synthase. The cells were cultivated on fructose with canola oil or canola oil/decanoic acid (DA) mixtures in fed-batch fermentations. The recombinant C. necator H16 (without any synthase modification) produced a polymer composed of 3-hydroxybutyrate (3HB) with mcl-subunits, including 3-hydroxyhexanoate (3HHx), and about 300-fold more 3-hydroxyoctanoate (3HO) than the yields reported in previous studies, as well as a significant amount of 3-hydroxydecanoate (3HD). Increasing the DA content in the feed from 0 to 15% v/v increased the molar content of the 3HD subunits from 1.2 to 2.1mol%. The presence of larger monomers, such as 3HO and 3HD, decreased the crystallinity and melting temperature and modified the mechanical properties of the polymers. Thus, replacing either of the two gene products (phaJ or phaC1) required to produce PHA from CoA-3-hydroxy fatty acids with broader spectrum enzymes, is suitable for the production of commercially useful scl-mcl-PHA.

Biosynthesis of Poly(3HB-co-3HP) with Variable Monomer Composition in Recombinant Cupriavidus necator H16

Polyhydroxyalkanoates are attractive alternatives to traditional plastics. However, although polyhydroxybutyrate (PHB) is produced in large quantities by Cupriavidus necator H16, its properties are far from ideal for the manufacture of plastic products. These properties may be improved through its coproduction with 3-hydroxypropionate (3HP), which leads to the formation of the copolymer poly(3-hydroxybutyrate-co-3-hydroxypropionate) (poly(3HB-co-3HP). To achieve this, a pathway was designed to enable C. necator H16 to convert β-alanine to 3HP. The initial low levels of incorporation of 3HP into the copolymer were overcome by the overproduction of the native propionyl-CoA transferase together with PHA synthase from Chromobacterium sp. USM2. Following optimization of 3HP incorporation into the copolymer, the molar fraction of 3HP could be controlled by cultivation in medium containing different concentrations of β-alanine. Between 0 and 80 mol % 3HP could be achieved. Further supplementation with 2 mM cysteine increased the maximum 3HP molar fraction to 89%. Additionally, the effect of deletions of the phaA and phaB1 genes of the phaCAB operon on 3HP molar fraction were investigated. A phaAB1 double knockout resulted in a copolymer containing 91 mol % 3HP without the need for cysteine supplementation.

Synthetic biology toolkit for engineering Cupriviadus necator H16 as a platform for CO2 valorization

BACKGROUND

CO₂ valorization is one of the effective methods to solve current environmental and energy problems, in which microbial electrosynthesis (MES) system has proved feasible and efficient. Cupriviadus necator (Ralstonia eutropha) H16, a model chemolithoautotroph, is a microbe of choice for CO₂ conversion, especially with the ability to be employed in MES due to the presence of genes encoding [NiFe]-hydrogenases and all the Calvin-Benson-Basham cycle enzymes. The CO₂ valorization strategy will make sense because the required hydrogen can be produced from renewable electricity independently of fossil fuels.

MAIN BODY

In this review, synthetic biology toolkit for C. necator H16, including genetic engineering vectors, heterologous gene expression elements, platform strain and genome engineering, and transformation strategies, is firstly summarized. Then, the review discusses how to apply these tools to make C. necator H16 an efficient cell factory for converting CO₂ to value-added products, with the examples of alcohols, fatty acids, and terpenoids. The review is concluded with the limitation of current genetic tools and perspectives on the development of more efficient and convenient methods as well as the extensive applications of C. necator H16.

CONCLUSIONS

Great progress has been made on genetic engineering toolkit and synthetic biology applications of C. necator H16. Nevertheless, more efforts are expected in the near future to engineer C. necator H16 as efficient cell factories for the conversion of CO₂ to value-added products.

Insights in the Degradation of Medium-Chain Length Dicarboxylic Acids in Cupriavidus necator H16 reveal Differences in β-Oxidation between Dicarboxylic Acids and Fatty Acids

Many homologous genes encoding β-oxidation enzymes were found in the genome of Cupriavidus necator H16 (synonym: Ralstonia eutropha H16). By proteome analysis, the degradation of adipic acid was investigated and showed differences to the degradation of hexanoic acid. During β-oxidation of adipic acid, activation with coenzyme A (CoA) is catalyzed by the two-subunit acyl-CoA ligase encoded by B0198 and B0199. The operon is completed by B0200 encoding a thiolase catalyzing the cleavage of acetyl-CoA at the end of the β-oxidation cycle. Strain C. necator ΔB0198-B0200 showed improved growth on adipic acid. Potential substitutes are B1239 for B0198-B0199 and A0170 as well as A1445 for B0200. A deletion mutant without all three thiolases showed diminished growth. The deletion of detected acyl-CoA dehydrogenase encoded by B2555 has an altered phenotype grown with sebacic acid but not adipic acid. With hexanoic acid, acyl-CoA dehydrogenase encoded by B0087 was detected on 2D gels. Both enzymes are active with adipoyl-CoA and hexanoyl-CoA as substrates, but specific activity indicates a higher activity of B2555 with adipoyl-CoA. 2D gels, growth experiments and enzyme assays suggest the specific expression of B2555 for the degradation of dicarboxylic acids. In C. necator H16 the degradation of carboxylic acids potentially changes with an increasing chain length. Two operons involved in growth with long-chain fatty acids seem to be replaced during growth on medium-chain carboxylic acids. Only two deletion mutants showed diminished growth. Replacement of deleted genes with one of the numerous homologous is likely. Importance The biotechnologically interesting bacterium Cupriavidus necator H16 was thoroughly investigated. Fifteen years ago, it was sequenced entirely and annotated (Pohlmann et al., 2006). Nevertheless, the degradation of monocarboxylic fatty acids and dicarboxylic acids has not been elucidated completely. C. necator is used to produce value-added products from affordable substrates. One of our investigations ' primary targets is the biotechnological production of organic acids with different and specific chain lengths. The versatile metabolism of carboxylic acids recommends C. necator H16 as a candidate for producing value-added organic products. Therefore, the metabolism of these compounds is of interest, and for different applications in industry, understanding such central metabolic pathways is crucial.

Emergent Approaches to Efficient and Sustainable Polyhydroxyalkanoate Production

Petroleum-derived plastics dominate currently used plastic materials. These plastics are derived from finite fossil carbon sources and were not designed for recycling or biodegradation. With the ever-increasing quantities of plastic wastes entering landfills and polluting our environment, there is an urgent need for fundamental change. One component to that change is developing cost-effective plastics derived from readily renewable resources that offer chemical or biological recycling and can be designed to have properties that not only allow the replacement of current plastics but also offer new application opportunities. Polyhydroxyalkanoates (PHAs) remain a promising candidate for commodity bioplastic production, despite the many decades of efforts by academicians and industrial scientists that have not yet achieved that goal. This article focuses on defining obstacles and solutions to overcome cost-performance metrics that are not sufficiently competitive with current commodity thermoplastics. To that end, this review describes various process innovations that build on fed-batch and semi-continuous modes of operation as well as methods that lead to high cell density cultivations. Also, we discuss work to move from costly to lower cost substrates such as lignocellulose-derived hydrolysates, metabolic engineering of organisms that provide higher substrate conversion rates, the potential of halophiles to provide low-cost platforms in non-sterile environments for PHA formation, and work that uses mixed culture strategies to overcome obstacles of using waste substrates. We also describe historical problems and potential solutions to downstream processing for PHA isolation that, along with feedstock costs, have been an Achilles heel towards the realization of cost-efficient processes. Finally, future directions for efficient PHA production and relevant structural variations are discussed.

Biosynthesis of polyhydroxyalkanoates from vegetable oil under the co-expression of fadE and phaJ genes in Cupriavidus necator

The acyl-CoA dehydrogenase (FadE) and (R)-specific enoyl-CoA hydratase (PhaJ) are functionally related to the degradation of fatty acids and the synthesis of polyhydroxyalkanoates (PHAs). To verify this, a recombinant Cupriavidus necator H16 harboring the plasmid -pMPJAS03- with fadE from Escherichia coli strain K12 and phaJ1 from Pseudomonas putida strain KT2440 under the arabinose promoter (araC-P_BAD) was constructed. The impact of co-expressing fadE and phaJ genes on C. necator H16/pMPJAS03 maintaining the wild-type synthase on short-chain-length/medium-chain-length PHA formation from canola or avocado oil at different arabinose concentrations was investigated. The functional activity of fadE_E.c led to obtaining higher biomass and PHA concentrations compared to the cultures without expressing the gene. While high transcriptional levels of phaJ1_P.p, at 0.1% of arabinose, aid the wild-type synthase to polymerize larger-side chain monomers, such as 3-Hydroxyoctanoate (3HO) and 3-Hydroxydecanoate (3HD). The presence of even small amounts of 3HO and 3HD in the co-polymers significantly depresses the melting temperature of the polymers, compared to those composed of pure 3-hydroxybutyrate (3HB). Our data presents supporting evidence that the synthesis of larger-side chain monomers by the recombinant strain relies not only upon the affinity of the wild-type synthase but also on the functionality of the intermediate supplying enzymes.

Modification of acetoacetyl-CoA reduction step in Ralstonia eutropha for biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from structurally unrelated compounds

Background

Poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) [P(3HB-co-3HHx)] is a bacterial polyester with high biodegradability, even in marine environments. Ralstonia eutropha has been engineered for the biosynthesis of P(3HB-co-3HHx) from vegetable oils, but its production from structurally unrelated carbon sources remains unsatisfactory.

Results

Ralstonia eutropha strains capable of synthesizing P(3HB-co-3HHx) from not only fructose but also glucose and glycerol were constructed by integrating previously established engineering strategies. Further modifications were made at the acetoacetyl-CoA reduction step determining flux distribution responsible for the copolymer composition. When the major acetoacetyl-CoA reductase (PhaB1) was replaced by a low-activity paralog (PhaB2) or enzymes for reverse β-oxidation, copolyesters with high 3HHx composition were efficiently synthesized from glucose, possibly due to enhanced formation of butyryl-CoA from acetoacetyl-CoA via (S)-3HB-CoA. P(3HB-co-3HHx) composed of 7.0 mol% and 12.1 mol% 3HHx fractions, adequate for practical applications, were produced at cellular contents of 71.4 wt% and 75.3 wt%, respectively. The replacement by low-affinity mutants of PhaB1 had little impact on the PHA biosynthesis on glucose, but slightly affected those on fructose, suggesting altered metabolic regulation depending on the sugar-transport machinery. PhaB1 mostly acted in the conversion of acetoacetyl-CoA when the cells were grown on glycerol, as copolyester biosynthesis was severely impaired by the lack of phaB1.

Conclusions

The present results indicate the importance of flux distribution at the acetoacetyl-CoA node in R. eutropha for the biosynthesis of the PHA copolyesters with regulated composition from structurally unrelated compounds.

Two NADH-dependent (S)-3-hydroxyacyl-CoA dehydrogenases from polyhydroxyalkanoate-producing Ralstonia eutropha

Ralstonia eutropha H16 contains both NADH- and NADPH-dependent reduction activities to acetoacetyl-CoA, and the NADPH-dependent activity is mediated by PhaB paralogs with (R)-stereospecificity providing (R)-3-hydroxybutyryl (3HB)-CoA monomer for poly((R)-3-hydroxybutyrate) synthesis. In contrast, the gene encoding the NADH-dependent enzyme has not been identified to date. This study focused on the NADH-dependent dehydrogenase with (S)-stereospecificity in R. eutropha, as the (S)-specific reduction of acetoacetyl-CoA potentially competed with the polyester biosynthesis via (R)-3HB-CoA. The NADH-dependent reduction activity decreased to one-half when the gene for H16_A0282 (PaaH1), one of two homologs of clostridial NADH-3HB-CoA dehydrogenase, was deleted. The enzyme responsible for the remaining activity was partially purified and identified as H16_A0602 (Had) belonging to a different family from PaaH1. Gene disruption analysis elucidated that most of the NADH-dependent activity was mediated by PaaH1 and Had. The kinetic analysis using the recombinant enzymes indicated that PaaH1 and Had were both NADH-dependent 3-hydroxyacyl-CoA dehydrogenases with rather broad substrate specificity to 3-oxoacyl-CoAs of C₄ to C₈. The deletion of had in the R. eutropha strain previously engineered for biosynthesis of poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) led to decrease in the C₆ composition of the copolyester synthesized from soybean oil, suggesting the role of Had in (S)-specific reduction of 3-oxohexanoyl-CoA with reverse β-oxidation direction. Crotonase ((S)-specific enoyl-CoA hydratase) in R. eutropha H16 was also partially purified and identified as H16_A3307.

Fatty Acid Oxidation Is Required for Myxococcus xanthus Development

Myxococcus xanthus cells produce lipid bodies containing triacylglycerides during fruiting body development. Fatty acid β-oxidation is the most energy-efficient pathway for lipid body catabolism. In this study, we used mutants in fadJ (MXAN_5371 and MXAN_6987) and fadI (MXAN_5372) homologs to examine whether β-oxidation serves an essential developmental function. These mutants contained more lipid bodies than the wild-type strain DK1622 and 2-fold more flavin adenine dinucleotide (FAD), consistent with the reduced consumption of fatty acids by β-oxidation. The β-oxidation pathway mutants exhibited differences in fruiting body morphogenesis and produced spores with thinner coats and a greater susceptibility to thermal stress and UV radiation. The MXAN_5372/5371 operon is upregulated in sporulating cells, and its expression could not be detected in csgA, fruA, or mrpC mutants. Lipid bodies were found to persist in mature spores of DK1622 and wild strain DK851, suggesting that the roles of lipid bodies and β-oxidation may extend to spore germination.IMPORTANCE Lipid bodies act as a reserve of triacylglycerides for use when other sources of carbon and energy become scarce. β-Oxidation is essential for the efficient metabolism of fatty acids associated with triacylglycerides. Indeed, the disruption of genes in this pathway has been associated with severe disorders in animals and plants. Myxococcus xanthus, a model organism for the study of development, is ideal for investigating the complex effects of altered lipid metabolism on cell physiology. Here, we show that β-oxidation is used to consume fatty acids associated with lipid bodies and that the disruption of the β-oxidation pathway is detrimental to multicellular morphogenesis and spore formation.

Development of a plasmid-based, tunable, tolC-derived expression system for application in Cupriavidus necator H16

Cupriavidus necator H16 gains increasing attention in microbial research and biotechnological application due to its diverse metabolic features. Here we present a tightly controlled gene expression system for C. necator including the pBBR1-vector that contains hybrid promoters originating from C. necator native tolC-promoter in combination with a synthetic tetO-operator. The expression of the reporter gene from these plasmids relies on the addition of the exogenous inducer doxycycline (dc). The novel expression system offers a combination of advantageous features as; (i) high and dose-dependent recombinant protein production, (ii) tight control with a high dynamic range (On/Off ratio), which makes it applicable for harmful pathways or for toxic protein production, (iii) comparable cheap inducer (doxycycline, dc), (iv) effective at low inducer concentration, that makes it useful for large scale application, (v) rapid, diffusion controlled induction, and (vi) the inducer does not interfere within the cell metabolism. As applications of the expression system in C. necator H16, the growth ability on glycerol was enhanced by constitutively expressing the E. coli glpk gene-encoding for glycerol kinase. Likewise, we used the system to overcome the expression toxicity of mevalonate pathway in C. necator H16. With this system, the mevalonate-genes were successfully introduced in the host and the recombinant strains could produce about 200 mg/l mevalonate.

Global changes in the proteome of Cupriavidus necator H16 during poly-(3-hydroxybutyrate) synthesis from various biodiesel by-product substrates

Synthesis of poly-[3-hydroxybutyrate] (PHB) by Cupriavidus necator H16 in batch cultures was evaluated using three biodiesel-derived by-products as the sole carbon sources: waste glycerol (REG-80, refined to 80 % purity with negligible free fatty acids); glycerol bottom (REG-GB, with up to 65 % glycerol and 35 % free fatty acids), and free fatty acids (REG-FFA, with up to 75 % FFA and no glycerol). All the three substrates supported growth and PHB production by C. necator, with polymer accumulation ranging from 9 to 84 % cell dry weight (cdw), depending on the carbon source. To help understand these differences, proteomic analysis indicated that although C. necator H16 was able to accumulate PHB during growth on all three biodiesel by-products, no changes in the levels of PHB synthesis enzymes were observed. However, significant changes in the levels of expression were observed for two Phasin proteins involved with PHB accumulation, and for a number of gene products in the fatty acid β-oxidation pathway, the Glyoxylate Shunt, and the hydrogen (H2) synthesis pathways in C. necator cells cultured with different substrates. The glycerol transport protein (GlpF) was induced in REG-GB and REG-80 glycerol cultures only. Cupriavidus necator cells cultured with REG-GB and REG-FFA showed up-regulation of β-oxidation and Glyoxylate Shunt pathways proteins at 24 h pi, but H2 synthesis pathways enzymes were significantly down-regulated, compared with cells cultured with waste glycerol. Our data confirmed earlier observations of constitutive expression of PHB synthesis proteins, but further suggested that C. necator H16 cells growing on biodiesel-derived glycerol were under oxidative stress.

Metabolic engineering of Cupriavidus necator for heterotrophic and autotrophic alka(e)ne production

Alkanes of defined carbon chain lengths can serve as alternatives to petroleum-based fuels. Recently, microbial pathways of alkane biosynthesis have been identified and enabled the production of alkanes in non-native producing microorganisms using metabolic engineering strategies. The chemoautotrophic bacterium Cupriavidus necator has great potential for producing chemicals from CO2: it is known to have one of the highest growth rate among natural autotrophic bacteria and under nutrient imbalance it directs most of its carbon flux to the synthesis of the acetyl-CoA derived polymer, polyhydroxybutyrate (PHB), (up to 80% of intracellular content). Alkane synthesis pathway from Synechococcus elongatus (2 genes coding an acyl-ACP reductase and an aldehyde deformylating oxygenase) was heterologously expressed in a C. necator mutant strain deficient in the PHB synthesis pathway. Under heterotrophic condition on fructose we showed that under nitrogen limitation, in presence of an organic phase (decane), the strain produced up to 670mg/L total hydrocarbons containing 435mg/l of alkanes consisting of 286mg/l of pentadecane, 131mg/l of heptadecene, 18mg/l of heptadecane, and 236mg/l of hexadecanal. We report here the highest level of alka(e)nes production by an engineered C. necator to date. We also demonstrated the first reported alka(e)nes production by a non-native alkane producer from CO2 as the sole carbon source.

Production of fatty acids in Ralstonia eutropha H16 by engineering β-oxidation and carbon storage

Ralstonia eutropha H16 is a facultatively autotrophic hydrogen-oxidizing bacterium capable of producing polyhydroxybutyrate (PHB)-based bioplastics. As PHB's physical properties may be improved by incorporation of medium-chain-length fatty acids (MCFAs), and MCFAs are valuable on their own as fuel and chemical intermediates, we engineered R. eutropha for MCFA production. Expression of UcFatB2, a medium-chain-length-specific acyl-ACP thioesterase, resulted in production of 14 mg/L laurate in wild-type R. eutropha. Total fatty acid production (22 mg/L) could be increased up to 2.5-fold by knocking out PHB synthesis, a major sink for acetyl-CoA, or by knocking out the acyl-CoA ligase fadD3, an entry point for fatty acids into β-oxidation. As ΔfadD3 mutants still consumed laurate, and because the R. eutropha genome is predicted to encode over 50 acyl-CoA ligases, we employed RNA-Seq to identify acyl-CoA ligases upregulated during growth on laurate. Knockouts of the three most highly upregulated acyl-CoA ligases increased fatty acid yield significantly, with one strain (ΔA2794) producing up to 62 mg/L free fatty acid. This study demonstrates that homologous β-oxidation systems can be rationally engineered to enhance fatty acid production, a strategy that may be employed to increase yield for a range of fuels, chemicals, and PHB derivatives in R. eutropha.

Compositional regulation of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) by replacement of granule-associated protein in Ralstonia eutropha

Background

Phasin (PhaP), a kind of polyhydroxyalkanoate (PHA) granule-associated proteins, has a role in controlling the properties of PHA granules surface, and is thought to have influence on PHA biosynthesis in PHA-producing bacteria. This study focused on the phaP1_Re locus in Ralstonia eutropha as a site of chromosomal modification for production of flexible poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] from soybean oil.

Results

Considering the high expression level of phaP1_Re, phaJ_Ac [encoding (R)-specific enoyl-CoA hydratase from Aeromonas caviae] was inserted into the downstream of phaP1_Re on chromosome 1 of R. eutropha strain NSDG harboring phaC_NSDG (encoding PHA synthase with broad substrate specificity). The constructed strain efficiently accumulated P(3HB-co-3HHx) on soybean oil with higher 3HHx composition when compared to the previous strain having phaJ_Ac within pha operon. Insertion of the second phaC_NSDG along with phaJ_Ac at the phaP1_Re locus led to incorporation of much larger 3HHx fraction into PHA chains, although the molecular weight was markedly reduced. The R. eutropha strains were further engineered by replacing phaP1_Re with phaP_Ac (encoding phasin from A. caviae) on the chromosome. Interestingly, the phasin replacement increased 3HHx composition in the soybean oil-based PHA with keeping high cellular contents, nevertheless no modification was conducted in the metabolic pathways. Kinetic and Western blot analyses of PHA synthase using cellular insoluble fractions strongly suggested that the phasin replacement not only enhanced activity of PHA synthase from A. caviae but also increased affinity especially to longer (R)-3HHx-CoA. It was supposed that the increased affinity of PHA synthase to (R)-3HHx-CoA was responsible for the higher 3HHx composition in the copolyester.

Conclusions

The downstream of phaP1_Re was a useful site for integration of genes to be overexpressed during PHA accumulation in R. eutropha. The results also clarified that polymerization properties of PHA synthase was affected by the kind of phasin co-existed on the surface of PHA granules, leading to altered composition of the resulting P(3HB-co-3HHx). The phasin replacement is a novel engineering strategy for regulation of composition of PHA copolyesters.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-015-0380-8) contains supplementary material, which is available to authorized users.

Engineering the heterotrophic carbon sources utilization range of Ralstonia eutropha H16 for applications in biotechnology

Ralstonia eutropha H16 is an interesting candidate for the biotechnological production of polyesters consisting of hydroxy- and mercaptoalkanoates, and other compounds. It provides all the necessary characteristics, which are required for a biotechnological production strain. Due to its metabolic versatility, it can convert a broad range of renewable heterotrophic resources into diverse valuable compounds. High cell density fermentations of the non-pathogenic R. eutropha can be easily performed. Furthermore, this bacterium is accessible to engineering of its metabolism by genetic approaches having available a large repertoire of genetic tools. Since the complete genome sequence of R. eutropha H16 has become available, a variety of transcriptome, proteome and metabolome studies provided valuable data elucidating its complex metabolism and allowing a systematic biology approach. However, high production costs for bacterial large-scale production of biomass and biotechnologically valuable products are still an economic challenge. The application of inexpensive raw materials could significantly reduce the expenses. Therefore, the conversion of diverse substrates to polyhydroxyalkanoates by R. eutropha was steadily improved by optimization of cultivation conditions, mutagenesis and metabolic engineering. Industrial by-products and residual compounds like glycerol, and substrates containing high carbon content per weight like palm, soybean, corn oils as well as raw sugar-rich materials like molasses, starch and lignocellulose, are the most promising renewable substrates and were intensively studied.

New Insight into the Role of the Calvin Cycle: Reutilization of CO2 Emitted through Sugar Degradation

Ralstonia eutropha is a facultative chemolithoautotrophic bacterium that uses the Calvin–Benson–Bassham (CBB) cycle for CO₂ fixation. This study showed that R. eutropha strain H16G incorporated ¹³CO₂, emitted by the oxidative decarboxylation of [1-¹³C₁]-glucose, into key metabolites of the CBB cycle and finally into poly(3-hydroxybutyrate) [P(3HB)] with up to 5.6% ¹³C abundance. The carbon yield of P(3HB) produced from glucose by the strain H16G was 1.2 times higher than that by the CBB cycle-inactivated mutants, in agreement with the possible fixation of CO₂ estimated from the balance of energy and reducing equivalents through sugar degradation integrated with the CBB cycle. The results proved that the ‘gratuitously’ functional CBB cycle in R. eutropha under aerobic heterotrophic conditions participated in the reutilization of CO₂ emitted during sugar degradation, leading to an advantage expressed as increased carbon yield of the storage compound. This is a new insight into the role of the CBB cycle, and may be applicable for more efficient utilization of biomass resources.

Improved artificial pathway for biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with high C6-monomer composition from fructose in Ralstonia eutropha

Poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) [P(3HB-co-3HHx)], a flexible and practical kind of polyhydroxyalkanoates, is generally produced from plant oils and fatty acids by several wild and recombinant bacteria. This study established an improved artificial pathway for the biosynthesis of P(3HB-co-3HHx) with high 3HHx composition from structurally unrelated fructose in Ralstonia eutropha. Depression of (R)-specific reduction of acetoacetyl-CoA by the deletion of phaB1 was an effective modification for formation of the C6-monomer unit from fructose driven by crotonyl-CoA carboxylase/reductase (Ccr). Co-overexpression of phaJ4a, which encodes medium-chain-length (R)-enoyl-CoA hydratase, with ccr promoted the incorporation of both 3HB and 3HHx units. Further introduction of emdMm, a synthetic gene encoding ethylmalonyl-CoA decarboxylase derived from mouse, was remarkably effective for P(3HB-co-3HHx) biosynthesis, probably by converting ethylmalonyl-CoA generated by the reductive carboxylase activity of Ccr back into butyryl-CoA. A high cellular content of P(3HB-co-3HHx) composed of 22mol% 3HHx could be produced from fructose by the engineered strain of R. eutropha with ΔphaB1 genotype expressing ccr, phaJ4a, and emd.

(S)-3-hydroxyacyl-CoA dehydrogenase/enoyl-CoA hydratase (FadB') from fatty acid degradation operon of Ralstonia eutropha H16

In this study (S)-3-hydroxyacyl-CoA dehydrogenase/enoyl-CoA hydratase (H16_A0461/FadB’, gene ID: 4247876) from one of two active fatty acid degradation operons of Ralstonia eutropha H16 has been heterologously expressed in Escherichia coli, purified as protein possessing a His-Tag and initially characterized. FadB’ is an enzyme with two catalytic domains exhibiting a single monomeric structure and possessing a molecular weight of 86 kDa. The C-terminal part of the enzyme harbors enoyl-CoA hydratase activity and is able to convert trans-crotonyl-CoA to 3-hydroxybutyryl-CoA. The N-terminal part of FadB’ comprises an NAD⁺ binding site and is responsible for 3-hydroxyacyl-CoA dehydrogenase activity converting (S)-3-hydroxybutyryl-CoA to acetoacetyl-CoA. Enoyl-CoA hydratase activity was detected spectrophotometrically with trans-crotonyl-CoA. (S)-3-Hydroxyacyl-CoA dehydrogenase activity was measured in both directions with acetoacetyl-CoA and 3-hydroxybutyryl-CoA. FadB’ was found to be strictly stereospecific to (S)-3-hydroxybutyryl-CoA and to prefer NAD⁺. The K_m value for acetoacetyl-CoA was 48 μM and V_max 149 μmol mg⁻¹ min⁻¹. NADP(H) was utilized at a rate of less than 10% in comparison to activity with NAD(H). FadB’ exhibited optimal activity at pH 6–7 and the activity decreased at alkaline and acidic pH values. Acetyl-CoA, propionyl-CoA and CoA were found to have an inhibitory effect on FadB’. This study is a first report on biochemical properties of purified (S)-stereospecific 3-hydroxyacyl-CoA dehydrogenase/enoyl-CoA hydratase with the inverted domain order from R. eutropha H16. In addition to fundamental information about FadB’ and fatty acid metabolism, FadB’ might be also interesting for biotechnological applications.

Enhancement of glycerol utilization ability of Ralstonia eutropha H16 for production of polyhydroxyalkanoates

Ralstonia eutropha H16 is a well-studied bacterium with respect to biosynthesis of polyhydroxyalkanoates (PHAs), which has attracted attentions as biodegradable bio-based plastics. However, this strain shows quite poor growth on glycerol of which bulk supply has been increasing as a major by-product of biodiesel industries. This study examined enhancement of glycerol assimilation ability of R. eutropha H16 by introduction of the genes of aquaglyceroporin (glpF) and glycerol kinase (glpK) from Escherichia coli. Although introduction of glpFK Ec into the strain H16 using a multi-copy vector was not successful, a recombinant strain possessing glpFK Ec within the chromosome showed much faster growth on glycerol than H16. Further analyses clarified that weak expression of glpK Ec alone allowed to establish efficient glycerol assimilation pathway, indicating that the poor growth of H16 on glycerol was caused by insufficient kination activity to glycerol, as well as this strain had a potential ability for uptake of extracellular glycerol. The engineered strains expressing glpFK Ec or glpK Ec produced large amounts of poly[(R)-3-hydroxybutyrate] [P(3HB)] from glycerol with much higher productivity than H16. Unlike other glycerol-utilizable wild strains of R. eutropha, the H16-derived engineered strains accumulated P(3HB) with no significant decrease in molecular weights on glycerol, and the polydispersity index of the glycerol-based P(3HB) synthesized by the strains expressing glpFK Ec was lower than those by the parent strains. The present study demonstrated possibility of R. eutropha H16-based platform for production of useful compounds from inexpensive glycerol.