Comparison of osteoclastogenesis and resorption activity of human osteoclasts on tissue culture polystyrene and on natural extracellular bone matrix in 2D and 3D

Bone cells influence the degradation interface of pure Mg and WE43 materials: Insights from multimodal in vitro analysis

In this study, the interaction of pure Mg and WE43 alloy under the presence of osteoblast (OB) and osteoclast (OC) cells and their influence on the degradation of materials have been deeply analyzed. Since OB and OC interaction has an important role in bone remodeling, we examined the surface morphology and dynamic changes in the chemical composition and thickness of the corrosion layers formed on pure Mg and WE43 alloy by direct monoculture and coculture of pre-differentiated OB and OC cells in vitro. Electrochemical techniques examined the corrosion performance. The corrosion products were characterized using a combination of the focused ion beam (FIB), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). Cell viability and morphology were assessed by fluorescent microscopy and SEM. Our findings demonstrate cell spread and attachment variations, which differ depending on the Mg substrates. It was clearly shown that cell culture groups delayed degradation processes with the lowest corrosion rate observed in the presence of OBOC coculture for the WE43 substrate. Ca-P enrichment was observed in the outer-middle region of the corrosion layer but only after 7 days of OBOC coculture on WE43 and after 14 days on the pure Mg specimens. STATEMENT OF SIGNIFICANCE: Magnesium metallic materials that can degrade over time provide distinct opportunities for orthopedic application. However, there is still a lack, especially in elucidating cell-material interface characterization. This study investigated the influence of osteoblast-osteoclast coculture in direct Mg-material contact. Our findings demonstrated that pre-differentiated osteoblasts and osteoclasts cocultured on Mg substrates influenced the chemistry of the corrosion layers. The cell spread and attachment were Mg substrate-dependent. The findings of coculturing bone cells directly on Mg materials within an in vitro model provide an effective approach for studying the dynamic degradation processes of Mg alloys while also elucidating cell behavior and their potential contribution to the degradation of these alloys.

Strategies for the Codelivery of Osteoclasts and Mesenchymal Stem Cells in 3D-Printable Osteochondral Scaffolds

Osteochondral defects, characterized by structural compromises to articular cartilage and subchondral bone, can cause pain and lead to progressive cartilage damage and eventual osteoarthritis. Unfortunately, repairing these defects remains difficult because of the poor regenerative properties of cartilage and complex mechanical demands of the joint. As such, the field of tissue engineering aims to develop multiphasic implants that replace pathological cartilage and bone tissue and restore mechanical functionality to the joint. Recent bone physiology investigations have demonstrated that osteoclast (OC) lineage cells are inextricably involved in osteoblastic bone formation through an extensive network of anabolic signaling pathways, and so the codelivery OC and osteoblast (OB) lineage cells within scaffolds is being actively explored for bone tissue engineering purposes. However, it remains unclear how these cells can be incorporated into the design of multiphasic osteochondral scaffolds to potentially enhance subchondral bone formation and subsequent implant osseointegration. To explore this question, we examined direct surface seeding and hydrogel encapsulation as potential scaffold cellularization strategies. First, we examined how OC precursor cells and peripheral blood monocytes (PBMCs) influence early-stage bone matrix development and osteogenesis in 2D coculture. Then, we evaluated the osteogenic potential of mesenchymal stem cells (MSCs) and PBMCs cocultures encapsulated within a gelatin methacrylate (GelMA) hydrogel system. Our findings demonstrate that coculturing PBMCs with MSCs in 2D cultures significantly enhanced cell proliferation, early bone matrix deposition, and the formation of cell clusters by Day 28. However, we observed no significant difference in type I collagen deposition between GelMA hydrogel scaffolds cultured in basal and OC conditions during the same period. In addition, we found that the GelMA hydrogel system with MSC/PBMC cocultures in OC conditions exhibited decreased osteogenic activity by Day 28. Collectively, our findings support the osteogenic potential of OC-lineage cells in 2D culture conditions, and the potential benefits of surface-seeding for the codelivery of OC-lineage cells and MSCs in osteo-scaffolds for enhanced osteochondral regeneration and broader bone tissue engineering purposes.

Evaluation of in vitro osteoblast and osteoclast differentiation from stem cell: a systematic review of morphological assays and staining techniques

Background

Understanding human stem cell differentiation into osteoblasts and osteoclasts is crucial for bone regeneration and disease modeling. Numerous morphological techniques have been employed to assess this differentiation, but a comprehensive review of their application and effectiveness is lacking.

Methods

Guided by the PRISMA framework, we conducted a rigorous search through the PubMed, Web of Science and Scopus databases, analyzing 254 articles. Each article was scrutinized against pre-defined inclusion criteria, yielding a refined selection of 14 studies worthy of in-depth analysis.

Results

The trends in using morphological approaches were identified for analyzing osteoblast and osteoclast differentiation. The three most used techniques for osteoblasts were Alizarin Red S (mineralization; six articles), von Kossa (mineralization; three articles) and alkaline phosphatase (ALP; two articles) followed by one article on Giemsa staining (cell morphology) and finally immunochemistry (three articles involved Vinculin, F-actin and Col1 biomarkers). For osteoclasts, tartrate-resistant acid phosphatase (TRAP staining) has the highest number of articles (six articles), followed by two articles on DAPI staining (cell morphology), and immunochemistry (two articles with VNR, Cathepsin K and TROP2. The study involved four stem cell types: peripheral blood monocyte, mesenchymal, dental pulp, and periodontal ligament.

Conclusion

This review offers a valuable resource for researchers, with Alizarin Red S and TRAP staining being the most utilized morphological procedures for osteoblasts and osteoclasts, respectively. This understanding provides a foundation for future research in this rapidly changing field.

Vasorin as an actor of bone turnover?

Bone diseases are increasing with aging populations and it is important to identify clues to develop innovative treatments. Vasn, which encodes vasorin (Vasn), a transmembrane protein involved in the pathophysiology of several organs, is expressed during the development in intramembranous and endochondral ossification zones. Here, we studied the impact of Vasn deletion on the osteoblast and osteoclast dialog through a cell Coculture model. In addition, we explored the bone phenotype of Vasn KO mice, either constitutive or tamoxifen-inducible, or with an osteoclast-specific deletion. First, we show that both osteoblasts and osteoclasts express Vasn. Second, we report that, in both KO mouse models but not in osteoclast-targeted KO mice, Vasn deficiency was associated with an osteopenic bone phenotype, due to an imbalance in favor of osteoclastic resorption. Finally, through the Coculture experiments, we identify a dysregulation of the Wnt/β-catenin pathway together with an increase in RANKL release by osteoblasts, which led to an enhanced osteoclast activity. This study unravels a direct role of Vasn in bone turnover, introducing a new biomarker or potential therapeutic target for bone pathologies.

Osteo-immunological impact of radon spa treatment: due to radon or spa alone? Results from the prospective, thermal bath placebo-controlled RAD-ON02 trial

Musculoskeletal disorders (MSDs) are associated with pain and lead to reduced mobility and quality of life for patients. Radon therapy is used as alternative or complementary to pharmaceutical treatments. According to previous reports, radon spa leads to analgesic and anti-inflammatory effects, but the cellular and molecular mechanisms are widely unknown. A previous study (RAD-ON01) revealed, that bone erosion markers like collagen fragments (C-terminal telopeptide, CTX) are reduced after radon spa treatment in serum of patients with degenerative MSDs. Within the scope of the prospective, placebo-controlled RAD-ON02 trial presented here, we analyzed the influence of radon and thermal spa treatment on osteoclastogenesis. From patient blood, we isolate monocytes, seeded them on bone slices and differentiated them in the presence of growth factors into mature osteoclasts (mOCs). Subsequent analysis showed a smaller fraction of mOCs after both treatments, which was even smaller after radon spa treatment. A significantly reduced resorbed area on bone slices reflects this result. Only after radon spa treatment, we detected in the serum of patients a significant decrease of receptor activator of NF-κB ligand (RANKL), which indicates reduced differentiation of OCs. However, other markers for bone resorption (CTX) and bone formation (OPG, OCN) were not altered after both treatments. Adipokines, such as visfatin and leptin that play a role in some MSD-types by affecting osteoclastogenesis, were not changed after both treatments. Further, also immune cells have an influence on osteoclastogenesis, by inhibiting and promoting terminal differentiation and activation of OCs, respectively. After radon treatment, the fraction of Treg cells was significantly increased, whereas Th17 cells were not altered. Overall, we observed that both treatments had an influence on osteoclastogenesis and bone resorption. Moreover, radon spa treatment affected the Treg cell population as well as the Th17/Treg ratio were affected, pointing toward a contribution of the immune system after radon spa. These data obtained from patients enrolled in the RAD-ON02 trial indicate that radon is not alone responsible for the effects on bone metabolism, even though they are more pronounced after radon compared to thermal spa treatment.

A Machine Learning-Based Image Segmentation Method to Quantify In Vitro Osteoclast Culture Endpoints

Quantification of in vitro osteoclast cultures (e.g. cell number) often relies on manual counting methods. These approaches are labour intensive, time consuming and result in substantial inter- and intra-user variability. This study aimed to develop and validate an automated workflow to robustly quantify in vitro osteoclast cultures. Using ilastik, a machine learning-based image analysis software, images of tartrate resistant acid phosphatase-stained mouse osteoclasts cultured on dentine discs were used to train the ilastik-based algorithm. Assessment of algorithm training showed that osteoclast numbers strongly correlated between manual- and automatically quantified values (r = 0.87). Osteoclasts were consistently faithfully segmented by the model when visually compared to the original reflective light images. The ability of this method to detect changes in osteoclast number in response to different treatments was validated using zoledronate, ticagrelor, and co-culture with MCF7 breast cancer cells. Manual and automated counting methods detected a 70% reduction (p < 0.05) in osteoclast number, when cultured with 10 nM zoledronate and a dose-dependent decrease with 1-10 μM ticagrelor (p < 0.05). Co-culture with MCF7 cells increased osteoclast number by ≥ 50% irrespective of quantification method. Overall, an automated image segmentation and analysis workflow, which consistently and sensitively identified in vitro osteoclasts, was developed. Advantages of this workflow are (1) significantly reduction in user variability of endpoint measurements (93%) and analysis time (80%); (2) detection of osteoclasts cultured on different substrates from different species; and (3) easy to use and freely available to use along with tutorial resources.

Degradation of 3D-printed magnesium phosphate ceramics in vitro and a prognosis on their bone regeneration potential

Regenerative bone implants promote new bone formation and ideally degrade simultaneously to osteogenesis. Although clinically established calcium phosphate bone grafts provide excellent osseointegration and osteoconductive efficacy, they are limited in terms of bioresorption. Magnesium phosphate (MP) based ceramics are a promising alternative, because they are biocompatible, mechanically extremely stable, and degrade much faster than calcium phosphates under physiological conditions. Bioresorption of an implant material can include both chemical dissolution as well as cellular resorption. We investigated the bioresorption of 3D powder printed struvite and newberyite based MP ceramics in vitro by a direct human osteoclast culture approach. The osteoclast response and cellular resorption was evaluated by means of fluorescence and TRAP staining, determination of osteoclast activities (CA II and TRAP), SEM imaging as well as by quantification of the ion release during cell culture. Furthermore, the bioactivity of the materials was investigated via SBF immersion, whereas hydroxyapatite precipitates were analyzed by SEM and EDX measurements. This bioactive coating was resorbed by osteoclasts. In contrast, only chemical dissolution contributed to bioresorption of MP, while no cellular resorption of the materials was observed. Based on our results, we expect an increased bone regeneration effect of MP compared to calcium phosphate based bone grafts and complete chemical degradation within a maximum of 1.5-3.1 years.

The effects of seeding density and osteoclastic supplement concentration on osteoclastic differentiation and resorption

The bone resorbing osteoclasts are a complex type of cell essential for in vivo bone remodeling. There is no consensus on medium composition and seeding density for in vitro osteoclastogenesis, despite the importance thereof on osteoclastic differentiation and activity. The aim of this study was to investigate the relative effect of monocyte or peripheral blood mononuclear cell (PBMC) seeding density, osteoclastic supplement concentration and priming on the in vitro generation of functional osteoclasts, and to explore and evaluate the usefulness of commonly used markers for osteoclast cultures. Morphology and osteoclast formation were analyzed with fluorescence imaging for tartrate resistant acid phosphatase (TRAP) and integrin β3 (Iβ3). TRAP release was analyzed from supernatant samples, and resorption was analyzed from culture on Corning® Osteo Assay plates. In this study, we have shown that common non-standardized culturing conditions of monocyte or PBMCs had a significant effect on the in vitro generation of functional osteoclasts. We showed how increased osteoclastic supplement concentrations supported osteoclastic differentiation and resorption but not TRAP release, while priming resulted in increased TRAP release as well. Increased monocyte seeding densities resulted in more and large TRAP positive bi-nuclear cells, but not directly in more multinucleated osteoclasts, resorption or TRAP release. Increasing PBMC seeding densities resulted in more and larger osteoclasts and more resorption, although resorption was disproportionally low compared to the monocyte seeding density experiment. Exploration of commonly used markers for osteoclast cultures demonstrated that Iβ3 staining was an excellent and specific osteoclast marker in addition to TRAP staining, while supernatant TRAP measurements could not accurately predict osteoclastic resorptive activity. With improved understanding of the effect of seeding density and osteoclastic supplement concentration on osteoclasts, experiments yielding higher numbers of functional osteoclasts can ultimately improve our knowledge of osteoclasts, osteoclastogenesis, bone remodeling and bone diseases.

Tuning the resorption-formation balance in an in vitro 3D osteoblast-osteoclast co-culture model of bone

The aim of the present study was to further improve an in vitro 3D osteoblast (OB) - osteoclast (OC) co-culture model of bone by tuning it towards states of formation, resorption, and equilibrium for their future applications in fundamental research, drug development and personalized medicine. This was achieved by varying culture medium composition and monocyte seeding density, the two external parameters that affect cell behavior the most. Monocytes were seeded at two seeding densities onto 3D silk-fibroin constructs pre-mineralized by MSC-derived OBs and were co-cultured in one of three different media (OC stimulating, Neutral and OB stimulating medium) for three weeks. Histology showed mineralized matrix after co-culture and OC markers in the OC medium group. Scanning Electron Microscopy showed large OC-like cells in the OC medium group. Micro-computed tomography showed increased formation in the OB medium group, equilibrium in the Neutral medium group and resorption in the OC medium group. Culture supernatant samples showed high early tartrate resistant acid phosphatase (TRAP) release in the OC medium group, a later and lower release in the Neutral medium group, and almost no release in the OB medium group. Increased monocyte seeding density showed a less-than-proportional increase in TRAP release and resorption in OC medium, while it proportionally increased TRAP release in Neutral medium without affecting net resorption. The 3D OB-OC co-culture model was effectively used to show an excess of mineral deposition using OB medium, resorption using OC medium, or an equilibrium using Neutral medium. All three media applied to the model may have their own distinct applications in fundamental research, drug development, and personalized medicine.

Modulation of Differentiation and Bone Resorbing Activity of Human (Pre-) Osteoclasts After X-Ray Exposure

Low-dose radiotherapy (LD-RT) is a local treatment option for patients with chronic degenerative and inflammatory diseases, in particular musculoskeletal diseases. Despite reported analgesic and anti-inflammatory effects, cellular and molecular mechanisms related to osteoimmunological effects are still elusive. Here we test the hypothesis that X-irradiation inhibits the differentiation of precursor osteoclasts into mature osteoclasts (mOC) and their bone resorbing activity. Circulating monocytes from healthy donors were isolated and irradiated after attachment with single or fractionated X-ray doses, comparable to an LD-RT treatment scheme. Then monocytes underwent ex vivo differentiation into OC during cultivation up to 21 days, under conditions mimicking the physiological microenvironment of OC on bone. After irradiation, apoptotic frequencies were low, but the total number of OC precursors and mOC decreased up to the end of the cultivation period. On top, we observed an impairment of terminal differentiation, i.e. a smaller fraction of mOC, reduced resorbing activity on bone, and release of collagen fragments. We further analyzed the effect of X-irradiation on multinucleation, resulting from the fusion of precursor OC, which occurs late during OC differentiation. At 21 days after exposure, the observation of smaller cellular areas and a reduced number of nuclei per mOC suggest an impaired fusion of OC precursors to form mOC. Before, at 14 days, the nuclear translocation of Nuclear Factor Of Activated T Cells 1 (NFATc1), a master regulator of osteoclast differentiation and fusion, was decreased. In first results, obtained in the frame of a longitudinal LD-RT study, we previously reported a pain-relieving effect in patients. However, in a subgroup of patients suffering from Calcaneodynia or Achillodynia, we did not observe a consistent decrease of established blood markers for resorption and formation of bone, or modified T cell subtypes involved in regulating these processes. To assess the relevance of changes in bone metabolism for other diseases treated with LD-RT will be subject of further studies. Taken together, we observed that in vitro X-irradiation of monocytes results in an inhibition of the differentiation into bone-resorbing OC and a concomitant reduction of resorbing activity. The detected reduced NFATc1 signaling could be one underlying mechanism.

Enamel matrix derivative does not affect osteoclast formation or bone resorption in cultures of mouse bone marrow macrophages or human monocytes

OBJECTIVE

Enamel matrix derivative (EMD) is widely used under the brand name Emdogain^® to promote periodontal regeneration in surgical treatment of periodontitis and peri-implantitis. The molecular mechanisms are unclear, but it has been proposed that EMD has stimulatory effects on the root cementum and periodontal ligament cells. Since dental implants lack these structures, we hypothesized that EMD-induced bone gain involve interactions with osteoclast precursor cells, with consequent inhibitory effect on osteoclast formation and/or activity. The aim was to evaluate this hypothesis.

MATERIAL AND METHODS

Primary mouse bone marrow macrophages (BMMs) and human peripheral blood monocytes were cultured in the presence of receptor activator nuclear factor-κB ligand (RANKL) to stimulate osteoclast formation. A purified Emdogain^® fraction was added to the cell cultures and the effect on number and size of newly formed osteoclasts were evaluated. In cultures on natural bone slices, bioanalytical methods were used to assay osteoclast number and bone resorption.

RESULTS

EMD had a negative effect on osteoclastogenesis in mouse cultures on plastic surface, whereas addition of EMD to osteoclast precursor cells on bone substrate did not affect osteoclast formation or bone resorption.

CONCLUSIONS

The results on natural bone matrix contradict a direct effect of EMD on osteoclast precursor cells.

Dose-Dependent Effects of a Novel Selective EP4 Prostaglandin Receptor Agonist on Treatment of Critical Size Femoral Bone Defects in a Rat Model

Difficulties in treating pseudarthrosis and critical bone defects are still evident in physicians’ clinical routines. Bone morphogenetic protein 2 (BMP-2) has shown promising osteoinductive results but also considerable side effects, not unexpected given that it is a morphogen. Thus, the bone regenerative potential of the novel selective, non-morphogenic EP₄ prostaglandin receptor agonist KMN-159 was investigated in this study. Therefore, mineralized collagen type-1 matrices were loaded with different amounts of BMP-2 or KMN-159 and implanted into a 5 mm critical-sized femoral defect in rats. After 12 weeks of observation, micro-computed tomography scans were performed to analyze the newly formed bone volume (BV) and bone mineral density (BMD). Histological analysis was performed to evaluate the degree of defect healing and the number of vessels, osteoclasts, and osteoblasts. Data were evaluated using Kruskal-Wallis followed by Dunn’s post hoc test. As expected, animals treated with BMP-2, the positive control for this model, showed a high amount of newly formed BV as well as bone healing. For KMN-159, a dose-dependent effect on bone regeneration could be observed up to a dose optimum, demonstrating that this non-morphogenic mechanism of action can stimulate bone formation in this model system.

Treatment of Critical-Size Femoral Bone Defects with Chitosan Scaffolds Produced by a Novel Process from Textile Engineering

The purpose of this study was to investigate, in vitro and in vivo, the suitability of chitosan (CHS) scaffolds produced by the net-shape-nonwoven (NSN) technology, for use as bone graft substitutes in a critical-size femoral bone defect in rats. For in vitro investigations, scaffolds made of CHS, mineralized collagen (MCM), or human cancellous bone allograft (CBA) were seeded with human telomerase-immortalized mesenchymal stromal cells (hTERT-MSC), incubated for 14 days, and thereafter evaluated for proliferation and osteogenic differentiation. In vivo, CHS, MCM and CBA scaffolds were implanted into 5 mm critical-size femoral bone defects in rats. After 12 weeks, the volume of newly formed bone was determined by microcomputed tomography (µCT), while the degree of defect healing, as well as vascularization and the number of osteoblasts and osteoclasts, was evaluated histologically. In vitro, CHS scaffolds showed significantly higher osteogenic properties, whereas treatment with CHS, in vivo, led to a lower grade of bone-healing compared to CBA and MCM. While chitosan offers a completely new field of scaffold production by fibers, these scaffolds will have to be improved in the future, regarding mechanical stability and osteoconductivity.

A Practical Procedure for the In Vitro Generation of Human Osteoclasts and Their Characterization

Osteoclasts are multinucleated cells derived from the hematopoietic monocyte/macrophage lineage that possess the unique capacity to resorb bone. Due to the crucial role of osteoclasts in maintaining bone homeostasis and pathologies, this cell type is pivotal in multiple research areas dedicated to bone physiology in health and disease. Although numerous methods for generation of human osteoclasts are already available, those rely either on cell labeling-based purification or an intermediate adhesion step after which cells are directly differentiated toward osteoclasts. While the former requires additional reagents and equipment, the latter harbors the risk of variable osteoclast formation due to varying numbers of osteoclast precursors available for different donors. In this study, we report a facile and reliable three-step method for the generation of human osteoclasts from blood-derived precursor cells. Monocytes were obtained after adhering peripheral blood-derived mononuclear cells to plastic substrates followed by macrophage induction and proliferation resulting in a homogeneous population of osteoclast precursors. Finally, macrophages were seeded into suitable culture vessels and differentiated toward osteoclasts. Osteoclastogenesis was monitored longitudinally using nondestructive techniques, while the functionality of mature osteoclasts was confirmed after 14 days of culture by analysis of functional (e.g., elevated tartrate-resistant acid phosphatase [TRAP]-activity, resorption) and morphological (e.g., presence of TRAP, actin ring, and integrin β₃) characteristics. Furthermore, we propose to use combinatory staining of three morphological osteoclast markers, rather than previously reported staining of a single or maximal two markers, to clearly distinguish osteoclasts from undifferentiated mononuclear cells. Impact statement Research related to bone biology requires a standardized and reliable method for in vitro generation of human osteoclasts. We here describe such a procedure which avoids shortcomings of previously published protocols. Further, we report on nondestructive methods to qualitatively and quantitatively monitor osteoclastogenesis longitudinally, and on analysis of osteoclast generation and functionality after 14 days. Specifically, we recommend assessment of morphological human osteoclast characteristics using combinatory staining of three markers to confirm successful osteoclast generation.

The Effect of Alendronate on Osteoclastogenesis in Different Combinations of M-CSF and RANKL Growth Factors

Bisphosphonates (BPs) are compounds resembling the pyrophosphate structure. BPs bind the mineral component of bones. During the bone resorption by osteoclasts, nitrogen-containing BPs are released and internalized, causing an inhibition of the mevalonate pathway. As a consequence, osteoclasts are unable to execute their function. Alendronate (ALN) is a bisphosphonate used to treat osteoporosis. Its administration could be associated with adverse effects. The purpose of this study is to evaluate four different ALN concentrations, ranging from 10⁻⁶ to 10⁻¹⁰ M, in the presence of different combinations of M-CSF and RANKL, to find out the effect of low ALN concentrations on osteoclastogenesis using rat and human peripheral blood mononuclear cells. The cytotoxic effect of ALN was evaluated based on metabolic activity and DNA concentration measurement. The alteration in osteoclastogenesis was assessed by the activity of carbonic anhydrase II (CA II), tartrate-resistant acid phosphatase staining, and actin ring formation. The ALN concentration of 10⁻⁶ M was cytotoxic. Low ALN concentrations of 10⁻⁸ and 10⁻¹⁰ M promoted proliferation, osteoclast-like cell formation, and CA II activity. The results indicated the induction of osteoclastogenesis with low ALN concentrations. However, when high doses of ALN were administered, their cytotoxic effect was demonstrated.

How to Get Them off?-Assessment of Innovative Techniques for Generation and Detachment of Mature Osteoclasts for Biomaterial Resorption Studies

The fusion process of mononuclear monocytes into multinuclear osteoclasts in vitro is an essential process for the study of osteoclastic resorption of biomaterials. Thereby biomaterials offer many influencing factors such as sample shape, material composition, and surface topography, which can have a decisive influence on the fusion and thus the entire investigation. For the specific investigation of resorption, it can therefore be advantageous to skip the fusion on samples and use mature, predifferentiated osteoclasts directly. However, most conventional detachment methods (cell scraper, accutase), lead to a poor survival rate of osteoclasts or to a loss of function of the cells after their reseeding. In the present study different conventional and novel methods of detachment in combination with different culture surfaces were investigated to obtain optimal osteoclast differentiation, yield, and vitality rates without loss of function. The innovative method-using thermoresponsive surfaces for cultivation and detachment-was found to be best suited. This is in particular due to its ability to maintain osteoclast activity, as proven by TRAP 5b-, CTSK-activity and resorption pits on dentin discs and decellularized osteoblast-derived matrix plates. In conclusion, it is shown, that osteoclasts can be predifferentiated on cell culture dishes and transferred to a reference biomaterial under preservation of osteoclastic resorption activity, providing biomaterial researchers with a novel tool for material characterization.

Establishment and validation of an in vitro co-culture model for oral cell lines using human PBMC-derived osteoclasts, osteoblasts, fibroblasts and keratinocytes

Indirect co-culture models with osteoclasts including oral cell lines may be influenced by M-CSF and RANKL in the common cell medium. Therefore, we investigated the viability and proliferation of osteoblasts (OB), fibroblasts (FB) and oral keratinocytes (OK) under stratified medium modification and assessed the differentiation of osteoclasts in each co-culture. The impact of M-CSF and RANKL in the common OC co-culture was assessed for OB, FB and OK via MTT assay via DAPI control. The multinuclearity and function of OC were evaluated by light microscopy, DAPI staining, resorption assay and FACS analysis. The PBMC showed the highest differentiation into OC after an incubation period of 7 days. Furthermore, co-culture with OB enhanced the number of differentiated multinucleated OC in comparison with monoculture, whereas co-culture with OK decreased PBMC multinuclearity and OC differentiation. FB did not influence the number of differentiated OC in a co-culture. RANKL and M-CSF reduction had no impact on OC differentiation in co-culture with FB or OB, whereas this medium modification for OK attenuated PBMC multinuclearity and OC differentiation in all approaches. Supplementation of RANKL and M-CSF can be modified for a co-culture of PBMC with FB or OB without disturbing OC differentiation. Thus, pathogenic processes of bone remodelling involving OB, OC, FB and OK in the oral cavity can be investigated thoroughly.

Regulation of osteogenesis and osteoclastogenesis by zoledronic acid loaded on biodegradable magnesium-strontium alloy

Inhibiting osteoclasts and osteoclast precursors to reduce bone resorption is an important strategy to treat osteoclast-related diseases, such as peri-prosthetic osteolysis. In this study, our objective was to study the role of zoledronic acid (ZA), as a highly potent and nitrogen-containing bisphosphonate, in promoting osteogenesis and inhibiting osteoclastogenesis properties of magnesium (Mg)-based implants. ZA was chemically associated with calcium phosphate (CaP) deposited on magnesium-strontium (Mg-Sr) alloy, which was confirmed by the morphological observation, phase composition and drug releasing via SEM, XRD spectrum and High Performance Liquid Chromatography (HPLC), respectively. The in vitro performances indicated that ZA-CaP bilayer coating Mg-Sr alloy could enhance the proliferation and the osteogenic differentiation as well as the mineralization of pre-osteoblasts, however, induce the apoptosis and inhibit the osteoclast differentiation. We further investigated the possible molecular mechanisms by using Quantitative real-time PCR (qRT-PCR) and Western Blotting, and the results showed that ZA-CaP bilayer coating Mg-Sr alloy could regulate the osteogenesis and osteoclastogenesis through the Estrogen Receptor α (ERα) and NF-κB signaling pathway. Moreover, ZA-CaP bilayer coating Mg-Sr alloy could regulate the cross talk of osteoblast-osteoclast and increase the ratio of OPG: RANKL in the co-culture system through OPG/RANKL/RANK signaling pathway, which promoting the balance of bone remodeling process. Therefore, these promising results suggest the potential clinical applications of ZA pretreated Mg-Sr alloys for bone defect repairs and periprosthetical osteolysis due to the excessive differentitation and maturation of osteoclasts.

A Double-Blind Placebo-Controlled Randomized Trial Evaluating the Effect of Polyphenol-Rich Herbal Congee on Bone Turnover Markers of the Perimenopausal and Menopausal Women

Based on the benefit of polyphenolic compounds on osteoporosis, we hypothesized that the polyphenol-rich herbal congee containing the combined extract of Morus alba and Polygonum odoratum leaves should improve bone turnover markers in menopausal women. To test this hypothesis, a randomized double-blind placebo-controlled study was performed. A total of 45 menopausal participants were recruited in this study. They were randomly divided into placebo, D1, and D2 groups, respectively. The subjects in D1 and D2 groups must consume the congee containing the combined extract of M. alba and P. odoratum leaves at doses of 50 and 1500 mg/day, respectively. At the end of an 8-week consumption period, all subjects were determined serum bone markers including calcium, alkaline phosphatase, osteocalcin, and beta CTX. In addition, the hematological and blood clinical chemistry changes, and total phenolic content in the serum were also determined. The results showed that the menopausal women in D2 group increased serum alkaline phosphatase, osteocalcin, and total phenolic compounds content but decreased CTX level. Clinical safety assessment failed to show toxicity and adverse effects. Therefore, herbal congee containing the combined extract of M. alba and P. odoratum leaves is the potential functional food that can decrease the risk of osteoporosis.

From the Clinical Problem to the Basic Research-Co-Culture Models of Osteoblasts and Osteoclasts

Bone tissue undergoes constant remodeling and healing when fracture happens, in order to ensure its structural integrity. In order to better understand open biological and clinical questions linked to various bone diseases, bone cell co-culture technology is believed to shed some light into the dark. Osteoblasts/osteocytes and osteoclasts dominate the metabolism of bone by a multitude of connections. Therefore, it is widely accepted that a constant improvement of co-culture models with both cell types cultured on a 3D scaffold, is aimed to mimic an in vivo environment as closely as possible. Although in recent years a considerable knowledge of bone co-culture models has been accumulated, there are still many open questions. We here try to summarize the actual knowledge and address open questions.

oxLDL inhibits differentiation and functional activity of osteoclasts via scavenger receptor-A mediated autophagy and cathepsin K secretion

Resorptive activity of osteoclasts is important for maintaining bone homeostasis. Endogenous compounds such as oxidized low density lipoprotein (oxLDL) have been shown to disturb this activity. While some studies have investigated the effects of oxLDL on the process of osteoclastogenesis, the underlying mechanism are not fully understood. We show here that oxLDL concentrations of ~10-25 µg protein (0.43-1.0 µM MDA/mg protein) completely blocked the formation of functional osteoclasts. The underlying mechanism implies an inhibition of autophagy that in turn leads to a decreased fusion of cathepsin K (CatK)-loaded lysosomal vesicles with the ruffled border membrane. As result, a lower secretion of CatK and impaired protonation of the resorption lacunae by vacuolar-ATPase (v-ATPase) is observed in the presence of oxLDL. We demonstrate that scavenger receptor A (SR-A) mediates oxLDL effects on osteoclastogenesis and repressing this receptor partially rescued oxLDL effects. Collectively, our data provides an insight into the possible mechanism of oxLDL on osteoclastogenesis suggesting that it does not perturb the packaging of CatK and v-ATPase (V-a3) in the secretory lysosome, but inhibits the fusion of these lysosomes to the ruffled border. The relevance of our findings suggests a distinct link between oxLDL, autophagy and osteoclastogenesis.

Bone remodelling in vitro: Where are we headed?: -A review on the current understanding of physiological bone remodelling and inflammation and the strategies for testing biomaterials in vitro

Bone remodelling is a dynamic process required for the maintenance of bone architecture in response to the changing mechanical needs. It is also a vital process during the repair of bone tissue following injury. Clinical intervention in terms of autografting or allografting is often required to heal bone injuries where physiological healing fails. The use of biomaterials as alternatives to autografts and allografts has spurred a significant research interest into further development of biomaterials for better clinical outcomes. Unfortunately, many biomaterials fail to make it to the clinic or fail after implantation due to the inconsistencies observed between in vitro and in vivo studies. It is therefore important to mimic the in vivo situation as closely as possible in an in vitro setting for testing biomaterials. The current in vitro models focus mostly on investigating the behaviour of osteoblast progenitors with the biomaterial under development as well as assessing the behaviour of osteoclasts, endothelial cells etc. However, the sequence of events that take place during bone healing or remodelling are not incorporated into the current in vitro models. This review highlights our current understanding of the physiological bone remodelling and the bone healing process followed by strategies to incorporate both the physiological and pathophysiological events into an in vitro environment. Here, we propose three strategies for the assessment of biomaterials for bone, which includes; (1) testing biomaterials in the presence of immune cells, (2) testing biomaterials for osteogenesis, and (3) testing biomaterials in the presence of osteoclasts followed by osteoblasts to recapitulate the physiological events of bone resorption prior to bone formation. The focus of this review is to discuss the third strategy in details as the first two strategies are currently incorporated into a majority of in vitro experiments.

Optimization of the Static Human Osteoblast/Osteoclast Co-culture System

Osteoblasts (OBs) and osteoclasts (OCs) are 2 major groups of bone cells. Their cell-to-cell interactions are important to ensure the continuity of the bone-remodeling process. Therefore, the present study was carried out to optimize an OB/OC co-culture system utilizing the human OB cell line hFOB 1.19 and OCs extracted from peripheral blood mononuclear cells (PBMNCs). It was a 2-step procedure, involving the optimization of the OB culture and the co-culture of the OBs with PBMNCs at an optimum ratio. Firstly, pre-OBs were cultured to 90% confluency and the time required for differentiation was determined. OB differentiation was determined using the van Gieson staining to detect the presence of collagen and Alizarin Red for calcium. Secondly, OBs and OCs were co-cultured at the ratios of 1 OC: 1 OB, 1 OC: 4 OBs, 2 OCs: 1 OB, and 1 OC: 2 OBs. Tartrate-resistant acid phosphatase (TRAP) staining was used to detect the differentiation of the OCs. The results showed that collagen was present on day 1, whereas calcium was detected as early as day 3. Based on the result of TRAP staining, 1 OC: 2 OBs was taken as the most appropriate ratio. No macrophage colony-stimulating factor and receptor activator of the nuclear factor-κB ligand were added because they were provided by the OBs. In conclusion, these optimization processes are vital as they ensure the exact time point and ratio of the OB/OC co-culture in order to produce a reliable and reproducible co-culture system.

clickECM: Development of a cell-derived extracellular matrix with azide functionalities

In vitro cultured cells produce a complex extracellular matrix (ECM) that remains intact after decellularization. The biological complexity derived from the variety of distinct ECM molecules makes these matrices ideal candidates for biomaterials. Biomaterials with the ability to guide cell function are a topic of high interest in biomaterial development. However, these matrices lack specific addressable functional groups, which are often required for their use as a biomaterial. Due to the biological complexity of the cell-derived ECM, it is a challenge to incorporate such functional groups without affecting the integrity of the biomolecules within the ECM. The azide-alkyne cycloaddition (click reaction, Huisgen-reaction) is an efficient and specific ligation reaction that is known to be biocompatible when strained alkynes are used to avoid the use of copper (I) as a catalyst. In our work, the ubiquitous modification of a fibroblast cell-derived ECM with azides was achieved through metabolic oligosaccharide engineering by adding the azide-modified monosaccharide Ac₄GalNAz (1,3,4,6-tetra-O-acetyl-N-azidoacetylgalactosamine) to the cell culture medium. The resulting azide-modified network remained intact after removing the cells by lysis and the molecular structure of the ECM proteins was unimpaired after a gentle homogenization process. The biological composition was characterized in order to show that the functionalization does not impair the complexity and integrity of the ECM. The azides within this "clickECM" could be accessed by small molecules (such as an alkyne-modified fluorophore) or by surface-bound cyclooctynes to achieve a covalent coating with clickECM.

STATEMENT OF SIGNIFICANCE

The clickECM was produced by the incorporation of azide-functionalized sugar analogues into the extracellular glycans of fibroblast cell cultures by metabolic oligosaccharide engineering. By introducing these azide groups into the glycan structures, we enabled this cell-derived ECM for bioorthogonal click reactions. Click chemistry provides extremely specific reactions with high efficiency, high selectivity, and high reaction yields. We could show that the azide functionalities within the clickECM are chemically accessible. Based on our here described clickECM technique it will be possible to create and investigate new clickECM materials with tunable bioactive properties and additional functionalities, which offers a promising approach for basic and applied research in the field of biomaterial science, biomedical applications, and tissue engineering.

Expression of typical osteoclast markers by PBMCs after PEG-induced fusion as a model for studying osteoclast differentiation

Bone is a metabolically active organ subjected to continuous remodeling process that involves resorption by osteoclast and subsequent formation by osteoblasts. Osteoclast involvement in this physiological event is regulated by macrophage colony-stimulating factor (M-CSF) and receptor activator of nuclear factor κB ligand (RANKL). Fusion of mono-nuclear pre-osteoclasts is a critical event for osteoclast differentiation and for bone resorption. Here we show that PBMCs can be successfully fused with polyethylenglicol (PEG) in order to generated viable osteoclast-like cells that exhibit tartrate-resistant acid phosphatase (TRAP) and bone resorptive activities. PEG-fused PBMCs expressed additional markers compatible with osteoclastogenic differentiation such as carbonic anhydrase II (CAII), calcitonin receptor (CR), cathepsin K (Cat K), vacuolar ATPase (V-ATPase) subunit C1 (V-ATPase), integrin β3, RANK and cell surface aminopeptidase N/CD13. Actin redistribution in PEG-fused cells was found to be affected by cell cycle synchronization at G0/G1 or G2/M phases. PEG-induced fusion also led to expression of tyrosine kinases c-Src and Syk in their phosphorylated state. Scanning electron microscopy images showed morphological features typical of osteoclast-like cells. The results here shown allow concluding that PEG-induced fusion of PBMCs provides a suitable model system for understanding the mechanisms involved in osteoclastogenesis and for assaying new therapeutic strategies.

Study of Osteoclast Adhesion to Cortical Bone Surfaces: A Correlative Microscopy Approach for Concomitant Imaging of Cellular Dynamics and Surface Modifications

Bone remodeling relies on the coordinated functioning of osteoblasts, bone-forming cells, and osteoclasts, bone-resorbing cells. The effects of specific chemical and physical bone features on the osteoclast adhesive apparatus, the sealing zone ring, and their relation to resorption functionality are still not well-understood. We designed and implemented a correlative imaging method that enables monitoring of the same area of bone surface by time-lapse light microscopy, electron microscopy, and atomic force microscopy before, during, and after exposure to osteoclasts. We show that sealing zone rings preferentially develop around surface protrusions, with lateral dimensions of several micrometers, and ∼1 μm height. Direct overlay of sealing zone rings onto resorption pits on the bone surface shows that the rings adapt to pit morphology. The correlative procedure presented here is noninvasive and performed under ambient conditions, without the need for sample labeling. It can potentially be applied to study various aspects of cell-matrix interactions.

In vitro model of bone to facilitate measurement of adhesion forces and super-resolution imaging of osteoclasts

To elucidate processes in the osteoclastic bone resorption, visualise resorption and related actin reorganisation, a combination of imaging technologies and an applicable in vitro model is needed. Nanosized bone powder from matching species is deposited on any biocompatible surface in order to form a thin, translucent, smooth and elastic representation of injured bone. Osteoclasts cultured on the layer expressed matching morphology to ones cultured on sawed cortical bone slices. Resorption pits were easily identified by reflectance microscopy. The coating allowed actin structures on the bone interface to be visualised with super-resolution microscopy along with a detailed interlinked actin networks and actin branching in conjunction with V-ATPase, dynamin and Arp2/3 at actin patches. Furthermore, we measured the timescale of an adaptive osteoclast adhesion to bone by force spectroscopy experiments on live osteoclasts with bone-coated AFM cantilevers. Utilising the in vitro model and the advanced imaging technologies we localised immunofluorescence signals in respect to bone with high precision and detected resorption at its early stages. Put together, our data supports a cyclic model for resorption in human osteoclasts.

Osteogenic and osteoclastogenic differentiation of co-cultured cells in polylactic acid-nanohydroxyapatite fiber scaffolds

The design of bone substitutes involves the creation of a microenvironment supporting molecular cross-talk between cells and scaffolds during tissue formation and remodelling. Bone remodelling process includes the cooperation of bone-building cells and bone-resorbing cells. In this paper we developed polylactic acid (PLA) and composite PLA-nanohydroxyapatite (nHA) scaffolds with 20 and 50wt.% of nHA by electrospinning technique to be used in bone tissue engineering. The developed scaffolds have different fiber diameter, porosity with interconnected pores and mechanical properties. Taking cues from the bone environment features we investigated the differentiation of human mesenchymal stem cells (hMSCs) from bone marrow in osteoblasts and the osteoclastogenesis in the developed scaffolds in homotypic and in co-culture up to 46 days. PLA and composite PLA-nHA scaffolds induced osteogenic and osteoclastogenic differentiation. Both osteoblasts and osteoclasts displayed high expression of specific markers (osteopontin, osteocalcin, RANK, RANKL) and functions such as secretion of ALP, cathepsin K and TRAP activity on composite scaffolds especially on PLA-nHA containing 20wt.% of nHA. The heterotypic interactions between osteoblasts and osteoclasts co-cultured in the developed scaffolds triggered their functional differentiation and activation.