Biosynthesis of adipic acid via microaerobic hydrogenation of cis,cis-muconic acid by oxygen-sensitive enoate reductase

Development of a Thermodynamically Favorable Multi-enzyme Cascade Reaction for Efficient Sustainable Production of ω-Amino Fatty Acids and α,ω-Diamines

Aliphatic ω-amino fatty acids (ω-AFAs) and α,ω-diamines (α,ω-DMs) are essential monomers for the production of nylons. Development of a sustainable biosynthesis route for ω-AFAs and α,ω-DMs is crucial in addressing the challenges posed by climate change. Herein, we constructed an unprecedented thermodynamically favorable multi-enzyme cascade (TherFavMEC) for the efficient sustainable biosynthesis of ω-AFAs and α,ω-DMs from cheap α,ω-dicarboxylic acids (α,ω-DAs). This TherFavMEC was developed by incorporating bioretrosynthesis analysis tools, reaction Gibbs free energy calculations, thermodynamic equilibrium shift strategies and cofactor (NADPH&ATP) regeneration systems. The molar yield of 6-aminohexanoic acid (6-ACA) from adipic acid (AA) was 92.3 %, while the molar yield from 6-ACA to 1,6-hexanediamine (1,6-HMD) was 96.1 %, which were significantly higher than those of previously reported routes. Furthermore, the biosynthesis of ω-AFAs and α,ω-DMs from 20.0 mM α,ω-DAs (C6-C9) was also performed, giving 11.2 mM 1,6-HMD (56.0 % yield), 14.8 mM 1,7-heptanediamine (74.0 % yield), 17.4 mM 1,8-octanediamine (87.0 % yield), and 19.7 mM 1,9-nonanediamine (98.5 % yield), respectively. The titers of 1,9-nonanediamine, 1,8-octanediamine, 1,7-heptanediamine and 1,6-HMD were improved by 328-fold, 1740-fold, 87-fold and 3.8-fold compared to previous work. Therefore, this work holds great potential for the bioproduction of ω-AFAs and α,ω-DMs.

Metabolic Engineering of Escherichia coli for the Biosynthesis of 3-Phenylpropionic Acid and 3-Phenylpropyl Acetate

3-Phenylpropionic acid (3PPA) and its derivative 3-phenylpropyl acetate (3PPAAc) are important aromatic compounds with broad applications in the cosmetics and food industries. In this study, we constructed a plasmid-free 3PPA-producing Escherichia coli strain and designed a novel 3PPAAc biosynthetic pathway. A module containing tyrosine ammonia lyase and enoate reductase, evaluated under the control of different promoters, was combined with phenylalanine-overproducing strain E. coli ATCC31884, enabling the plasmid-free de novo production of 218.16 ± 43.62 mg L^-1 3PPA. The feasibility of the pathway was proved by screening four heterologous alcohol acetyltransferases, which catalyzed the transformation of 3-phenylpropyl alcohol into 3PPAAc. Afterward, 94.59 ± 16.25 mg L^-1 3PPAAc was achieved in the engineered E. coli strain. Overall, we have not only demonstrated the potential of de novo synthesis of 3PPAAc in microbes for the first time but also provided a platform for the future of biosynthesis of other aromatic compounds.

Recent advances and perspectives on production of value-added organic acids through metabolic engineering

Organic acids are important consumable materials with a wide range of applications in the food, biopolymer and chemical industries. The global consumer organic acids market is estimated to increase to $36.86 billion by 2026. Conventionally, organic acids are produced from the chemical catalysis process with petrochemicals as raw materials, which posts severe environmental concerns and conflicts with our sustainable development goals. Most of the commonly used organic acids can be produced from various organisms. As a state-of-the-art technology, large-scale fermentative production of important organic acids with genetically-modified microbes has become an alternative to the chemical route to meet the market demand. Despite the fact that bio-based organic acid production from renewable cheap feedstock provides a viable solution, low productivity has impeded their industrial-scale application. With our deeper understanding of strain genetics, physiology and the availability of strain engineering tools, new technologies including synthetic biology, various metabolic engineering strategies, omics-based system biology tools, and high throughput screening methods are gradually established to bridge our knowledge gap. And they were further applied to modify the cellular reaction networks of potential microbial hosts and improve the strain performance, which facilitated the commercialization of consumable organic acids. Here we present the recent advances of metabolic engineering strategies to improve the production of important organic acids including fumaric acid, citric acid, itaconic acid, adipic acid, muconic acid, and we also discuss the current challenges and future perspectives on how we can develop a cost-efficient, green and sustainable process to produce these important chemicals from low-cost feedstocks.

Microbial production of valuable chemicals by modular co-culture strategy

Nowadays, microbial synthesis has become a common way for producing valuable chemicals. Traditionally, microbial production of valuable chemicals is accomplished by a single strain. For the purpose of increasing the production titer and yield of a recombinant strain, complicated pathways and regulation layers should be fine-tuned, which also brings a heavy metabolic burden to the host. In addition, utilization of various complex and mixed substrates further interferes with the normal growth of the host strain and increases the complexity of strain engineering. As a result, modular co-culture technology, which aims to divide a target complex pathway into separate modules located at different single strains, poses an alternative solution for microbial production. Recently, modular co-culture strategy has been employed for the synthesis of different natural products. Therefore, in this review, various chemicals produced with application of co-cultivation technology are summarized, including co-culture with same species or different species, and regulation of population composition between the co-culture members. In addition, development prospects and challenges of this promising field are also addressed, and possible solution for these issues were also provided.

Research Progress on the Construction of Artificial Pathways for the Biosynthesis of Adipic Acid by Engineered Microbes

Adipic acid is an important bulk chemical used in the nylon industry, as well as in food, plasticizers and pharmaceutical fields. It is thus considered one of the most important 12 platform chemicals. The current production of adipic acid relies on non-renewable petrochemical resources and emits large amounts of greenhouse gases. The bio-production of adipic acid from renewable resources via engineered microorganisms is regarded as a green and potential method to replace chemical conversion, and has attracted attention all over the world. Herein we review the current status of research on several artificial pathways for the biosynthesis of adipic acid, especially the reverse degradation pathway, which is a full biosynthetic method and has achieved the highest titer of adipic acid so far. Other artificial pathways including the fatty acid degradation pathway, the muconic acid conversion pathway, the polyketide pathway, the α-ketopimelate pathway and the lysine degradation pathway are also discussed. In addition, the challenges in the bio-production of adipic acid via these artificial pathways are analyzed and the prospects are presented with the intention of providing some significant points for the promotion of adipic acid biosynthesis.

Current Progress in Production of Building-Block Organic Acids by Consolidated Bioprocessing of Lignocellulose

Several organic acids have been indicated among the top value chemicals from biomass. Lignocellulose is among the most attractive feedstocks for biorefining processes owing to its high abundance and low cost. However, its highly complex nature and recalcitrance to biodegradation hinder development of cost-competitive fermentation processes. Here, current progress in development of single-pot fermentation (i.e., consolidated bioprocessing, CBP) of lignocellulosic biomass to high value organic acids will be examined, based on the potential of this approach to dramatically reduce process costs. Different strategies for CBP development will be considered such as: (i) design of microbial consortia consisting of (hemi)cellulolytic and valuable-compound producing strains; (ii) engineering of microorganisms that combine biomass-degrading and high-value compound-producing properties in a single strain. The present review will mainly focus on production of organic acids with application as building block chemicals (e.g., adipic, cis,cis-muconic, fumaric, itaconic, lactic, malic, and succinic acid) since polymer synthesis constitutes the largest sector in the chemical industry. Current research advances will be illustrated together with challenges and perspectives for future investigations. In addition, attention will be dedicated to development of acid tolerant microorganisms, an essential feature for improving titer and productivity of fermentative production of acids.

Exploring functionality of the reverse β-oxidation pathway in Corynebacterium glutamicum for production of adipic acid

BACKGROUND

Adipic acid, a six-carbon platform chemical mainly used in nylon production, can be produced via reverse β-oxidation in microbial systems. The advantages posed by Corynebacterium glutamicum as a model cell factory for implementing the pathway include: (1) availability of genetic tools, (2) excretion of succinate and acetate when the TCA cycle becomes overflown, (3) initiation of biosynthesis with succinyl-CoA and acetyl-CoA, and (4) established succinic acid production. Here, we implemented the reverse β-oxidation pathway in C. glutamicum and assessed its functionality for adipic acid biosynthesis.

RESULTS

To obtain a non-decarboxylative condensation product of acetyl-CoA and succinyl-CoA, and to subsequently remove CoA from the condensation product, we introduced heterologous 3-oxoadipyl-CoA thiolase and acyl-CoA thioesterase into C. glutamicum. No 3-oxoadipic acid could be detected in the cultivation broth, possibly due to its endogenous catabolism. To successfully biosynthesize and secrete 3-hydroxyadipic acid, 3-hydroxyadipyl-CoA dehydrogenase was introduced. Addition of 2,3-dehydroadipyl-CoA hydratase led to biosynthesis and excretion of trans-2-hexenedioic acid. Finally, trans-2-enoyl-CoA reductase was inserted to yield 37 µg/L of adipic acid.

CONCLUSIONS

In the present study, we engineered the reverse β-oxidation pathway in C. glutamicum and assessed its potential for producing adipic acid from glucose as starting material. The presence of adipic acid, albeit small amount, in the cultivation broth indicated that the synthetic genes were expressed and functional. Moreover, 2,3-dehydroadipyl-CoA hydratase and β-ketoadipyl-CoA thiolase were determined as potential target for further improvement of the pathway.

Environmental benefits of soy-based bio-adhesives as an alternative to formaldehyde-based options

The restrictions imposed on the use of formaldehyde in wood panel adhesives have been the driving force behind the development of formaldehyde-free resins for the manufacture of wood products. Considering as a boundary condition the idea that the use of fossil-based raw materials should be replaced by biological options, there is growing interest in the environmental assessment of different alternatives for soy-based adhesives, as possible options to replace commonly used synthetic resins. This report includes the environmental profiles of soy-based adhesives taking into account the life cycle assessment (LCA) methodology. In addition, in order to increase their potential to replace synthetic resins, a sensitivity analysis of the main contributors to environmental damage was performed, thus giving an open guide for further research and improvement. This study aims to provide innovative alternatives and new trends in the field of environmentally friendly bio-adhesives for the wood panel industry.

Adsorption of adipic acid in Al/B-N/P nanocages: DFT investigations

Drug delivery clusters based on nanocages recently have been the most capable to study. Adipic acid (ADPA) interaction mechanism over nanocages of X(Al/B)12Y(N/P)12 was investigated. We analyzed various electronic, chemical, and spectroscopic properties with nanocages of the adsorbed ADPA molecule. Adsorption energies were calculated to study the adsorption of ADPA with nanocages. Raman enhanced surface scattering is used to track the drug as an effective approach to vibrational spectroscopy. Detection of the drug has been investigated using the SERS properties of nanocages. Title drug acts as a donor of electrons and adsorbs at the electrophilic site of nanocages. Variations in chemical descriptors to recognize the sensing property of ADPA-nanocages are also noted. Analysis of various properties explains enhancement which makes it possible to detect the drug in other products. • Interaction of adipic acid with fullerene-like metal nanocages • Enhancement of spectral properties • Changes in charge transfer values in nanocage-drug system • Docking studies identify the drug delivery property.

Microbial engineering for the production of C2-C6 organic acids

Covering: up to the end of 2020Organic acids, as building block compounds, have been widely used in food, pharmaceutical, plastic, and chemical industries. Until now, chemical synthesis is still the primary method for industrial-scale organic acid production. However, this process encounters some inevitable challenges, such as depletable petroleum resources, harsh reaction conditions and complex downstream processes. To solve these problems, microbial cell factories provide a promising approach for achieving the sustainable production of organic acids. However, some key metabolites in central carbon metabolism are strictly regulated by the network of cellular metabolism, resulting in the low productivity of organic acids. Thus, multiple metabolic engineering strategies have been developed to reprogram microbial cell factories to produce organic acids, including monocarboxylic acids, hydroxy carboxylic acids, amino carboxylic acids, dicarboxylic acids and monomeric units for polymers. These strategies mainly center on improving the catalytic efficiency of the enzymes to increase the conversion rate, balancing the multi-gene biosynthetic pathways to reduce the byproduct formation, strengthening the metabolic flux to promote the product biosynthesis, optimizing the metabolic network to adapt the environmental conditions and enhancing substrate utilization to broaden the substrate spectrum. Here, we describe the recent advances in producing C₂-C₆ organic acids by metabolic engineering strategies. In addition, we provide new insights as to when, what and how these strategies should be taken. Future challenges are also discussed in further advancing microbial engineering and establishing efficient biorefineries.

Recent Advances in the Microbial Synthesis of Hemoglobin

Hemoglobin is a cofactor-containing protein with heme that plays important roles in transporting and storing oxygen. Hemoglobins have been widely applied as acellular oxygen carriers, bioavailable iron-supplying agents, and food-grade coloring and flavoring agents. To meet increasing demands and overcome the drawbacks of chemical extraction, the biosynthesis of hemoglobin has become an attractive alternative. Several hemoglobins have recently been synthesized by various microorganisms through metabolic engineering and synthetic biology. In this review, we summarize the novel strategies that have been used to biosynthesize hemoglobin. These strategies can also serve as references for producing other heme-binding proteins.

Fully biological production of adipic acid analogs from branched catechols

Microbial production of adipic acid from lignin-derived monomers, such as catechol, is a greener alternative to the petrochemical-based process. Here, we produced adipic acid from catechol using catechol 1,2-dioxygenase (CatA) and a muconic acid reductase (MAR) in Escherichia coli. As the reaction progressed, the pH of the media dropped from 7 to 4-5 and the muconic acid isomerized from the cis,cis (ccMA) to the cis,trans (ctMA) isomer. Feeding experiments suggested that cells preferentially uptook ctMA and that MAR efficiently reduced all muconic isomers to adipic acid. Intrigued by the substrate promiscuity of MAR, we probed its utility to produce branched chiral diacids. Using branched catechols likely found in pretreated lignin, we found that while MAR fully reduced 2-methyl-muconic acid to 2-methyl-adipic acid, MAR reduced only one double bond in 3-substituted muconic acids. In the future, MAR's substrate promiscuity could be leveraged to produce chiral-branched adipic acid analogs to generate branched, nylon-like polymers with reduced crystallinity.

Genetic Manipulation of a Lipolytic Yeast Candida aaseri SH14 Using CRISPR-Cas9 System

A lipolytic yeast Candida aaseri SH14 that can utilise long-chain fatty acids as the sole carbon source was isolated from oil palm compost. To develop this strain as a platform yeast for the production of bio-based chemicals from renewable plant oils, a genetic manipulation system using CRISPR-Cas9 was developed. Episomal vectors for expression of Cas9 and sgRNA were constructed using an autonomously replicating sequence isolated from C. aaseri SH14. This system guaranteed temporal expression of Cas9 for genetic manipulation and rapid curing of the vector from transformed strains. A β-oxidation mutant was directly constructed by simultaneous disruption of six copies of acyl-CoA oxidases genes (AOX2, AOX4 and AOX5) in diploid cells using a single sgRNA with 70% efficiency and the Cas9 vector was efficiently removed. Blocking of β-oxidation in the triple AOX mutant was confirmed by the accumulation of dodecanedioic acid from dodecane. Targeted integration of the expression cassette for C. aaseri lipase2 was demonstrated with 60% efficiency using this CRISPR-Cas9 system. This genome engineering tool could accelerate industrial application of C. aaseri SH14 for production of bio-based chemicals from renewable oils.

One-Pot Biocatalytic Transformation of Adipic Acid to 6-Aminocaproic Acid and 1,6-Hexamethylenediamine Using Carboxylic Acid Reductases and Transaminases

Production of platform chemicals from renewable feedstocks is becoming increasingly important due to concerns on environmental contamination, climate change, and depletion of fossil fuels. Adipic acid (AA), 6-aminocaproic acid (6-ACA) and 1,6-hexamethylenediamine (HMD) are key precursors for nylon synthesis, which are currently produced primarily from petroleum-based feedstocks. In recent years, the biosynthesis of adipic acid from renewable feedstocks has been demonstrated using both bacterial and yeast cells. Here we report the biocatalytic conversion/transformation of AA to 6-ACA and HMD by carboxylic acid reductases (CARs) and transaminases (TAs), which involves two rounds (cascades) of reduction/amination reactions (AA → 6-ACA → HMD). Using purified wild type CARs and TAs supplemented with cofactor regenerating systems for ATP, NADPH, and amine donor, we established a one-pot enzyme cascade catalyzing up to 95% conversion of AA to 6-ACA. To increase the cascade activity for the transformation of 6-ACA to HMD, we determined the crystal structure of the CAR substrate-binding domain in complex with AMP and succinate and engineered three mutant CARs with enhanced activity against 6-ACA. In combination with TAs, the CAR L342E protein showed 50-75% conversion of 6-ACA to HMD. For the transformation of AA to HMD (via 6-ACA), the wild type CAR was combined with the L342E variant and two different TAs resulting in up to 30% conversion to HMD and 70% to 6-ACA. Our results highlight the suitability of CARs and TAs for several rounds of reduction/amination reactions in one-pot cascade systems and their potential for the biobased synthesis of terminal amines.

Production of adipic acid by short- and long-chain fatty acid acyl-CoA oxidase engineered in yeast Candida tropicalis

In this study, to produce adipic acid, mutant strains of Candida tropicalis KCTC 7212 deficient of AOX genes encoding acyl-CoA oxidases which are important in the β-oxidation pathway were constructed. Production of adipic acid in the mutants from the most favorable substrate C12 methyl laurate was significantly increased. The highest level of production of adipic acid was obtained in the C. tropicalis ΔAOX4::AOX5 mutant of 339.8 mg L^-1 which was about 5.4-fold higher level compared to the parent strain. The C. tropicalis ΔAOX4::AOX5 mutant was subjected to fed-batch fermentation at optimized conditions of agitation rate of 1000 rpm, pH 5.0 and methyl laurate of 3% (w/v), giving the maximum level of adipic acid of 12.1 g L^-1 and production rate of 0.1 g L^-1 h^-1.

Advances in bio-based production of dicarboxylic acids longer than C4

Growing concerns of environmental pollution and fossil resource shortage are major driving forces for bio-based production of chemicals traditionally from petrochemical industry. Dicarboxylic acids (DCAs) are important platform chemicals with large market and wide applications, and here the recent advances in bio-based production of straight-chain DCAs longer than C4 from biological approaches, especially by synthetic biology, are reviewed. A couple of pathways were recently designed and demonstrated for producing DCAs, even those ranging from C5 to C15, by employing respective starting units, extending units, and appropriate enzymes. Furthermore, in order to achieve higher production of DCAs, enormous efforts were made in engineering microbial hosts that harbored the biosynthetic pathways and in improving properties of biocatalytic elements to enhance metabolic fluxes toward target DCAs. Here we summarize and discuss the current advantages and limitations of related pathways, and also provide perspectives on synthetic pathway design and optimization for hyper-production of DCAs.