Investigating the effects of eleven key physicochemical factors on growth and lipid accumulation of Chlorella sp. as a feedstock for biodiesel production

From biomass to Energy: Investigating Chlorella pyrenoidosa's potential for fuel and carbon materials

This study investigated the bioenergy potential of Chlorella pyrenoidosa (CP) for use as fuel and carbon material through chemical and thermal characterization. The thermo-kinetic characteristics of Chlorella pyrenoidosa were assessed using isoconversional, linear regression, and non-linear regression approaches. The physicochemical analysis revealed high carbon (53.1 %), volatile (69.35 %), and low moisture (2.19 %), ash content (3.42 %). The results indicated that the non-linear model fitting method was the most accurate with the approximated activation energy (Eα) and pre-exponential Arrhenius constant (Ln A) were 124.92 ± 2.74 kJ/mol and 23.38 ± 4.63 min-1, respectively. Additionally, the inclusion of sodium bicarbonate resulted in a significant increase in BET surface area. FTIR analysis revealed several functional groups beneficial for carbon material, while XRD analysis showed a broad peak correlated with an amorphous structure. This study highlighted the potential of Chlorella pyrenoidosa biomass for various applications, including carbon material and renewable fuel.

Assessment of hydrocarbon degradation capacity and kinetic modeling of Chlorella vulgaris and Scenedesmus quadricauda for crude oil phycoremediation under mixotrophic conditions

Crude oil spills imperil aquatic ecosystems globally, prompting innovative solutions such as microalgae-based bioremediation. This study explores the potential of Chlorella vulgaris and Scenedesmus quadricauda, for crude oil spill phycoremediation under mixotrophic conditions and varying crude oil concentrations (0.5-2%). C. vulgaris demonstrated notable resilience, thriving up to 1% crude oil exposure, while S. quadricauda adapted to lower concentrations. Optimal growth for both was observed at 0.5% exposure. Chlorophyll a content in C. vulgaris increases at 0.5% exposure but declines above 1%, while a decline was noticeable in chlorophyll b in treatment groups above 1%. Carotenoid levels varied, displaying the highest levels at higher concentrations above 1.5%. Similarly, S. quadricauda showed increased chlorophyll a content at 0.5% exposure, with stable carotenoid levels and a decline in chlorophyll b content at higher concentrations. GC/MS analyses indicated C. vulgaris efficiently degraded aliphatic compounds like decane and tridecane, surpassing S. quadricauda in degrading both aliphatic and aromatic hydrocarbons. Growth kinetics was best represented by the modified Gompertz and logistic models. These findings highlight the species-specific adaptability and optimal concentration for microalgae to degrade crude oil effectively, advancing phycoremediation processes and strategies critical for environmental restoration.

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

The study effectively optimized the transesterification process of Jatropha oil to fatty acid methyl ester using response surface methodology (CCD) and Taguchi orthogonal method, leading to enhanced efficiency and product quality. The optimization of five process parameters was conducted to predict the biodiesel yield (%) from the transesterification of Jatropha oil. The procedure was made easier with the use of a nanocatalyst made from calcium oxide obtained from snail shells using the hydrothermal technique. The RSM approach yielded an optimal FAME of 94.10% under specific conditions: a methanol to oil ratio of 5 : 1, catalyst weight of 1.5 w/w, reaction temperature of 50 °C, reaction duration of 45 minutes, and an agitation speed of 250 rpm across 32 experimental trials. On the other hand, the Taguchi method predicted a higher FAME yield of 86.36% using specific operational parameters. These parameters included a methanol to oil ratio of 4 : 1, catalyst weight of 0.5 w/w, reaction temperature of 60 °C, reaction duration of 25 minutes, and an agitation speed of 200 rpm. These parameters were determined through 16 experimental trials. The RSM technique yielded impressive results with a determined coefficient of determination (R2) of 0.9943, adjusted R2 of 0.9838, predicted R2 of 0.8470, and a coefficient of variance (CV) of 0.65. On the other hand, the Taguchi method had coefficients of 0.8994, 0.7483, and 1.95. The FAME yield of RSM was slightly higher, but the Taguchi method was much more cost-efficient. The analysis of variance (ANOVA) results showed that the methanol to oil ratio had the highest influence on the yield, accounting for 49.61% of the variation. This highlights the significant impact of this factor on the overall process. The study highlights the significance of utilizing advanced techniques such as TOA and RSM, which are known for their effectiveness. The study aims to enhance the yield and efficiency of the transesterification process, thereby increasing the overall production of fatty acid methyl ester from Jatropha oil. This innovative approach efficiently generates biodiesel from renewable resources, like Jatropha oil, in a manner that is both environmentally friendly and maximizes the effectiveness of the process parameters.

Microalgae biofuels: illuminating the path to a sustainable future amidst challenges and opportunities

The development of microalgal biofuels is of significant importance in advancing the energy transition, alleviating food pressure, preserving the natural environment, and addressing climate change. Numerous countries and regions across the globe have conducted extensive research and strategic planning on microalgal bioenergy, investing significant funds and manpower into this field. However, the microalgae biofuel industry has faced a downturn due to the constraints of high costs. In the past decade, with the development of new strains, technologies, and equipment, the feasibility of large-scale production of microalgae biofuel should be re-evaluated. Here, we have gathered research results from the past decade regarding microalgae biofuel production, providing insights into the opportunities and challenges faced by this industry from the perspectives of microalgae selection, modification, and cultivation. In this review, we suggest that highly adaptable microalgae are the preferred choice for large-scale biofuel production, especially strains that can utilize high concentrations of inorganic carbon sources and possess stress resistance. The use of omics technologies and genetic editing has greatly enhanced lipid accumulation in microalgae. However, the associated risks have constrained the feasibility of large-scale outdoor cultivation. Therefore, the relatively controllable cultivation method of photobioreactors (PBRs) has made it the mainstream approach for microalgae biofuel production. Moreover, adjusting the performance and parameters of PBRs can also enhance lipid accumulation in microalgae. In the future, given the relentless escalation in demand for sustainable energy sources, microalgae biofuels should be deemed a pivotal constituent of national energy planning, particularly in the case of China. The advancement of synthetic biology helps reduce the risks associated with genetically modified (GM) microalgae and enhances the economic viability of their biofuel production.

Growth stage-related biomass, pigments, and biochemical composition of Stichococcus bacillaris, Synechococcus sp., and Trentepohlia aurea isolated from Gua Tempurung, a cave in Malaysia

As part of the lampenflora that inhabit limestone caves, microalgae play an important role in cave ecosystems but are understudied in tropical ecoregions. In the present study, the dominant eukaryotic and prokaryotic microalgae identified in lampenflora samples collected from Gua Tempurung, a cave in Malaysia, and growth stage-related microalgal attributes were determined. Stichococcus bacillaris, Synechococcus sp., and Trentepohlia aurea were selected and cultured in Bold's Basal Medium (S. bacillaris and T. aurea) or BG-11 medium (Synechococcus sp.) under laboratory conditions. The highest specific growth rate (0.72 ± 0.21 day^-1) and dry weight (0.11 ± 0.04 mg L^-1) were recorded in S. bacillaris in the early stationary phase. Trentepohlia aurea and Synechococcus sp. had the highest ash-free dry weight and total ash percentage (11.18 ± 4.64 mg L^-1 and 8.55% ± 6.73%, respectively) in the early stationary phase. Stichococcus bacillaris had the highest moisture content (84.26% ± 0.64%) in the exponential phase. Chlorophylls a and b were highest in the early stationary phase in T. aurea (0.706 ± 0.40 mg L^-1 and 1.094 ± 0.589 mg L^-1, respectively). Carotenoid levels were highest in Synechococcus sp. in the early stationary stage (0.07 ± 0.02 mg L^-1). Lipids were the major biochemical compound identified at the highest levels in Synechococcus sp. (67.87% ± 7.75%) in the early stationary phase, followed by protein recorded at the highest levels in T. aurea (57.99% ± 4.99%) in the early stationary phase. Carbohydrates were the compound identified least often with the highest recorded levels found in T. aurea (9.94% ± 0.49%) in the late stationary phase. Biomass, pigments, and biochemical accumulation varied at different growth stages in the studied microalgae, and this variation was species-specific. The present study provides a benchmark for the growth phases of aerophytic cave microalgae, which will be useful for determining their optimum harvest time and obtaining biochemical compounds of interest.

Emerging technologies and potential applications of algae in dentistry - A critical review

Algae are effective predecessors of nutrient foods and preventive drugs, gaining global attraction in recent years. It exhibits potent antiviral, antibacterial, antifungal, anti-inflammatory, antioxidant, anti-glycemic, and cholesterol-lowering properties due to their richness in highly valuable secondary metabolites. Nevertheless, algae produce valuable bioproducts, its application in dentistry is in its primitive stage. This review focuses on the emergence and emerging role of micro/macroalgae as a natural source of therapeutic, preventive, and biocompatible agents in dentistry. Several studies unveiled that Cyanobacteria, Spirulina, and Chlorella species offer high oral antibacterial and antifungal properties compared to gold standard agents. The characteristic of algae to scavenge superoxide and hydroxyl free radicals, fabricate them as an anti-oxidative and anti-cancer agent. Either alone or by synergism with pinnacle therapies they are found to produce promising curative actions against periodontitis by embattling proinflammatory cytokines. Technologies extend the functions of microalgae as a detoxifying agent, potent drug delivery system, and adjunct regenerative material in chronic periodontitis. Its application as thickening, binding, anticariogenic agent in toothpaste, antibacterial agent in mouthwash, and biocompatible agent in dental impression materials remains very primitive. Low-cost and eco-friendly technologies are needed for the production of oral hygiene products using algal biomass.

Maximizing unsaturated fatty acids production by using sugarcane agroindustry wastes in cultivation of Desmodesmus sp. in a flat plate photobioreactor

Microalgae lipid accumulation can be accomplished by different strategies rather than naturally reaching the stationary phase. Many studies employ nitrogen (N) depletion to improve lipid production; however, this approach might not be a suitable alternative when growth in wastewater is attempted. Agro-industry effluents in particular can have high concentrations of N, so nutrient removal is also required. This study evaluated two possibilities of achieving stress conditions in Desmodesmus sp. cultivation: light intensity and CO₂ concentration. The culture medium also included liquid and solid residues from the sugarcane agro-industry: vinasse and a biofertilizer produced from bagasse biochar. Optimization of growth in a flat plate photobioreactor was conducted by combining a two-level factorial design and simplex methodology. Both the highest biomass and polyunsaturated fatty acid productivities (150.2 and 21.4 mg L^-1 day^-1, respectively) were achieved near the central points (5% CO₂ in air and 1000 μmol m^-2 s^-1 light intensity). These results show the possibility of microalgae growth in a sustainable medium coupled with high-value lipid production, e.g., omegas-3, - 6, and - 9.

RSM process optimization of biodiesel production from rapeseed oil and waste corn oil in the presence of green and novel catalyst

In the scenario of global warming and pollution, the green synthesis and use of biodiesel has acquired utmost priority. Due to several limitations of homogeneous catalysis, organobase immobilized heterogeneous catalyzed production of biodiesel has come out as a favored route. The present report demonstrates the design and synthesis of Peganum harmala spice seed extract modified GO-CuFe₂O₄ (SSE@GO-CuFe₂O₄) nanocomposite as an organobase functionalized high surface area magnetic nanocatalyst. Pistachio leaves were used in the green reduction of precursor salts to synthesize CuFe₂O₄ NPs. The as-synthesized nanomaterial was characterized physicochemically by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-Ray analysis (EDX), elemental mapping, transmission electron microscopy (TEM), X-Ray diffraction (XRD), thermogravimetric analysis (TGA) and vibrating sample magnetometer techniques (VSM). Subsequently, the catalyst was explored in the efficient synthesis of biodiesels by trans-esterification of two substrates, the rapeseed oil and waste corn oil. The optimum conditions for biodiesel production were determined through response surface methodology based on Box-Behnken design including the study of calibration curves and 3D contour plots. Easy separation and workup, use of green medium, excellent reused for several times and short reaction time are outstanding benefits of this study.

Screening of symbiotic Streptomyces spp. and optimization of microalgal growth in a microalgae-actinomycetes co-culture system

Microalgal biodiesel as a substitute for fossil energy has attracted extensive attention. However, the high cost of microalgae cultivation limits the industrial production of microalgal biodiesel. The co-culture system may offer a means to increase microalgae's biomass production. In this study, Streptomyces strains were selected to construct and optimize co-culture systems with Monoraphidium sp. HDMA-11 and the algal cell biomass, lipid content, phycocyanin content, starch content, and fatty acid composition were determined. The results showed that Streptomyces nojiriensis significantly promoted Monoraphidium sp. HDMA-11 growth and a co-culture system were established. Orthogonal experiments showed that the Monoraphidium sp. HDMA-11 biomass was further increased when the initial culture pH was 7.5, the inoculation time of Streptomyces strain supernatants was 36 h, the volume ratio of microalgal actinomycetes was 1:1, and no additional acetic acid was added. Under these conditions, compared with monocultured Monoraphidium sp. HDMA-11, the cell biomass and lipid productivity of the co-culture system increased by 525.8 and 155.1%, respectively. These results suggest that S. nojiriensis supernatant potentially enhances microalgae biomass and may represent a new method to improve microalgae growth.

Physiological and Biochemical Responses of Bicarbonate Supplementation on Biomass and Lipid Content of Green Algae Scenedesmus sp. BHU1 Isolated From Wastewater for Renewable Biofuel Feedstock

In the present study, different microalgae were isolated from wastewater environment and evaluated for higher growth and lipid accumulation. The growth adaptability of all the isolated microalgae were tested for carbon source with supplementation of sodium bicarbonate in BG-11 N⁺ medium. Further based on the uptake rate of sodium bicarbonate and growth behavior, microalgal strains were selected for biofuel feedstock. During the study, growth parameters of all the isolates were screened after supplementation with various carbon sources, in which strain Scenedesmus sp. BHU1 was found highly effective among all. The efficacy of Scenedesmus sp. BHU1 strain under different sodium bicarbonate (4–20 mM) concentration, in which higher growth 1.4 times greater than control was observed at the concentration 12 mM sodium bicarbonate. In addition, total chlorophyll content (Chl-a + Chl-b), chlorophyll fluorescence (Fv/Fm, Y(II), ETR max, and NPQmax), and biomass productivity were found to be 11.514 μg/ml, 0.673, 0.675, and 31.167 μmol electrons m⁻² s⁻¹, 1.399, 59.167 mg/L/day, respectively, at the 12 mM sodium bicarbonate. However, under optimum sodium bicarbonate supplementation, 56.920% carbohydrate and 34.693% lipid content were accumulated, which showed potential of sodium bicarbonate supplementation in renewable biofuel feedstock by using Scenedesmus sp. BHU1 strain.

Study on the mechanism of biochar loaded typical microalgae Chlorella removal of cadmium

Coconut shell activated carbon (Csac) is one of the most widely used materials to remove cadmium (Cd) from contaminated water. A large diversity of microorganisms exists in various aquatic systems and may aid Cd removal by Csac. In this study, we explored the reactions of Csac with microalgae (Chlorella) in Cd-containing media. The results of scanning electron microscope (SEM) imaging, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), superconducting pulse-Fourier transform nuclear magnetic resonance (pulse-FT NMR) and X-ray photoelectron spectroscopy (XPS) indicated that Chlorella could adhere in the micropores of Csac formed Csac@Chlorella composite adsorbent loading Chlorella. Furthermore, the composite adsorbent surface had abundant functional groups such -COOH, -OH and C-O-C, which served as active sites during the adsorption process. Compared with Csac, Csac@Chlorella had an enhanced Cd adsorption capacity evidently. The results showed that pH 8, 0.2 g Csac, OD₆₈₀ of 0.1 for Chlorella were optimal conditions for maximum Cd adsorption capacity within one hour contact time. Furthermore, the Cd adsorption process was well described by the pseudo-second-order and Langmuir adsorption isotherm models. The models revealed that the adsorption process was mainly based on chemical adsorption of a single molecular layer, accompanied by electrostatic attraction, complexation and intracellular adsorption, amongst other parameters. Collectively, the findings illustrate that the microalgae (Chlorella)-Csac-Cd interaction is complex and will thus have immense interest to a broad range of biological, environmental, and geoscience communities.

Monitoring lipids profile, CO2 fixation, and water recyclability for the economic viability of microalgae Chlorella vulgaris cultivation at different initial nitrogen

The economic viability of microalgae as a bioenergy source depends on many factors. High CO₂ fixing rate, improved lipids yield, and minimum water footprint are few key parameters. This study investigates the effect of four initial nitrogen concentrations (1-, 2-, 6- and 10-mM as nitrate) on lipids yield, their classification and composition, CO₂ fixation rate, and water quality for further reuse after first cultivation. The initial 6 mM nitrate was found optimum for the growth and overall lipid productivity of Chlorella vulgaris. The maximum quantum efficiency (as Fv/Fm ratio) for algae decreases along with the cell growth profile and depletion of the initial nitrate concentration. CO₂ fixation rate increased initially and peaked during exponential growth and then declined for the rest of the cultivation period. A higher CO₂ fixation rate was recorded at 6 mM, and an overall fixation rate of CO₂ was high at 6 mM. A higher total organic carbon (TOC) is produced in recycled water at a low nitrogen concentration of 1 and 2 mM. TOC changes during the cultivation period and with each reuse of water. Water was recycled twice successfully, while growth was inhibited during the 3rd cycle. Based on all these investigations, 6 mM of initial nitrogen was found optimal at given growth conditions.

Application of Box-Behnken design to mineralization and color removal of palm oil mill effluent by electrocoagulation process

In this study, palm oil mill effluent (POME) was treated using electrocoagulation, whereby the influencing factors including voltage, electrolysis time, and electrolyte amount were optimized to achieve the highest chemical oxygen demand (COD) and color removal efficiencies. Graphite was selected as electrode material due to its performance better compared to aluminum and copper. Response surface methodology (RSM) was carried out for optimization of the electrocoagulation operating parameters. The best model obtained using Box-Behnken design (BBD) were quadratic for COD removal (R² = 0.9844), color reduction (R² = 0.9412), and oil and grease removal (R² = 0.9724). The result from the analysis of variance (ANOVA) was obtained to determine the relationship between factors and treatment efficiencies. The experimental results under optimized conditions such as voltage 14, electrolysis time of 3 h, and electrolyte amount of 13.41 g/L show that the electrocoagulation process effectively reduced the COD (56%), color (65%), and oil and grease (99%) of the POME treatment. Graphical abstract.