Structure and site evolution of molybdenum carbide catalysts upon exposure to oxygen

Innovative flow-through reaction system for the sustainable production of phenolic monomers from lignocellulose catalyzed by supported Mo2C

Molybdenum carbide supported on activated carbon (β-Mo2C/AC) has been tested as catalyst in the reductive catalytic fractionation (RCF) of lignocellulosic biomass both in batch and in Flow-Through (FT) reaction systems. High phenolic monomer yields (34 wt.%) and selectivity to monomers with reduced side alkyl chains (up to 80 wt.%) could be achieved in batch in the presence of hydrogen. FT-RCF were made with no hydrogen feed, thus via transfer hydrogenation from ethanol. Similar selectivity could be attained in FT-RCF using high catalyst/biomass ratios (0.6) and high molybdenum loading (35 wt.%) in the catalyst, although selectivity decreased with lower catalyst/biomass ratios or molybdenum contents. Regardless of these parameters, high delignification of the lignocellulosic biomass and similar monomer yields were observed in the FT mode (13-15 wt.%) while preserving the holocellulose fractions in the delignified pulp. FT-RCF system outperforms the batch reaction mode in the absence of hydrogen, both in terms of activity and selectivity to reduced monomers that is attributed to the two-step non-equilibrium processes and the removal of diffusional limitations that occur in the FT mode. Even though some molybdenum leaching was detected, the catalytic performance could be maintained with negligible loss of activity or selectivity for 15 consecutive runs.

The Impact of Oxygen Surface Coverage and Carbidic Carbon on the Activity and Selectivity of Two-Dimensional Molybdenum Carbide (2D-Mo2C) in Fischer-Tropsch Synthesis

Transformations of oxygenates (CO2, CO, H2O, etc.) via Mo2C-based catalysts are facilitated by the high oxophilicity of the material; however, this can lead to the formation of oxycarbides and complicate the identification of the (most) active catalyst state and active sites. In this context, the two-dimensional (2D) MXene molybdenum carbide Mo2CTx (Tx are passivating surface groups) contains only surface Mo sites and is therefore a highly suitable model catalyst for structure-activity studies. Here, we report that the catalytic activity of Mo2CTx in Fischer-Tropsch (FT) synthesis increases with a decreasing coverage of surface passivating groups (mostly O*). The in situ removal of Tx species and its consequence on CO conversion is highlighted by the observation of a very pronounced activation of Mo2CTx (pretreated in H2 at 400 °C) under FT conditions. This activation process is ascribed to the in situ reductive defunctionalization of Tx groups reaching a catalyst state that is close to 2D-Mo2C (i.e., a material containing no passivating surface groups). Under steady-state FT conditions, 2D-Mo2C yields higher hydrocarbons (C5+ alkanes) with 55% selectivity. Alkanes up to the kerosine range form, with value of α = 0.87, which is ca. twice higher than the α value reported for 3D-Mo2C catalysts. The steady-state productivity of 2D-Mo2C to C5+ hydrocarbons is ca. 2 orders of magnitude higher relative to a reference β-Μo2C catalyst that shows no in situ activation under identical FT conditions. The passivating Tx groups of Mo2CTx can be reductively defunctionalized also by using a higher H2 pretreatment temperature of 500 °C. Yet, this approach leads to a removal of carbidic carbon (as methane), resulting in a 2D-Mo2C1-x catalyst that converts CO to CH4 with 61% selectivity in preference to C5+ hydrocarbons that are formed with only 2% selectivity. Density functional theory (DFT) results attribute the observed selectivity of 2D-Mo2C to C5+ alkanes to a higher energy barrier for the hydrogenation of surface alkyl species relative to the energy barriers for C-C coupling. The removal of O* is the rate-determining step in the FT reaction over 2D-Mo2C, and O* is favorably removed in the form of CO2 relative to H2O, consistent with the observation of a high CO2 selectivity (ca. 50%). The absence of other carbon oxygenates is explained by the energetic favoring of the direct over the hydrogen-assisted dissociative adsorption of CO.

Influence of Carbonization Conditions on Structural and Surface Properties of K-Doped Mo2C Catalysts for the Synthesis of Methyl Mercaptan from CO/H2/H2S

The cooperative transition of sulfur-containing pollutants of H2S/CO/H2 to the high-value chemical methyl mercaptan (CH3SH) is catalyzed by Mo-based catalysts and has good application prospects. Herein, a series of Al2O3-supported molybdenum carbide catalysts with K doping (denoted herein as K-Mo2C/Al2O3) are fabricated by the impregnation method, with the carbonization process occurring under different atmospheres and different temperatures between 400 and 600 °C. The CH4-K-Mo2C/Al2O3 catalyst carbonized by CH4/H2 at 500 °C displays unprecedented performance in the synthesis of CH3SH from CO/H2S/H2, with 66.1% selectivity and a 0.2990 g·gcat-1·h-1 formation rate of CH3SH at 325 °C. H2 temperature-programmed reduction, temperature-programmed desorption, X-ray diffraction and Raman and BET analyses reveal that the CH4-K-Mo2C/Al2O3 catalyst contains more Mo coordinatively unsaturated surface sites that are responsible for promoting the adsorption of reactants and the desorption of intermediate products, thereby improving the selectivity towards and production of CH3SH. This study systematically investigates the effects of catalyst carbonization and passivation conditions on catalyst activity, conclusively demonstrating that Mo2C-based catalyst systems can be highly selective for producing CH3SH from CO/H2S/H2.

Soft-template derived Ni/Mo2C hetero-sheet arrays for large current density hydrogen evolution reaction

Practical structural design and electronic regulation are significant for synthesising efficient electrocatalysts. Therefore, a facile soft-template approach has been applied to successfully grow Ni/Mo₂C heterojunction nanosheet arrays on nickel foam (NF) skeleton (NS-Ni/Mo₂C@NF) using polyvinylpyrrolidone (PVP) as a soft template. The density functional theory (DFT) calculations reveal that abundant Ni/Mo₂C heterojunction in NS-Ni/Mo₂C@NF can provide many active sites with a moderate hydrogen adsorption free energy (ΔG_H*, 0.037 eV). Benefiting from this nanosheet array structure and abundant Ni/Mo₂C heterojunctions, the NS-Ni/Mo₂C@NF catalyst can efficiently catalyze HER, especially at large current densities. As a result, only 151 and 271 mV overpotentials are needed to deliver 100 and 1000 mA/cm² HER, respectively. More importantly, the hydrogen production testing with NS-Ni/Mo₂C@NF as the working electrode can run stably for 500 h without activity decay under the current density of 500 mA/cm² commonly used in industrial water electrolyzers, indicating that NS-Ni/Mo₂C@NF has broad application prospects.

Two-dimensional molybdenum carbide 2D-Mo2C as a superior catalyst for CO2 hydrogenation

Early transitional metal carbides are promising catalysts for hydrogenation of CO₂. Here, a two-dimensional (2D) multilayered 2D-Mo₂C material is prepared from Mo₂CT_x of the MXene family. Surface termination groups T_x (O, OH, and F) are reductively de-functionalized in Mo₂CT_x (500 °C, pure H₂) avoiding the formation of a 3D carbide structure. CO₂ hydrogenation studies show that the activity and product selectivity (CO, CH₄, C₂–C₅ alkanes, methanol, and dimethyl ether) of Mo₂CT_x and 2D-Mo₂C are controlled by the surface coverage of T_x groups that are tunable by the H₂ pretreatment conditions. 2D-Mo₂C contains no T_x groups and outperforms Mo₂CT_x, β-Mo₂C, or the industrial Cu-ZnO-Al₂O₃ catalyst in CO₂ hydrogenation (evaluated by CO weight time yield at 430 °C and 1 bar). We show that the lack of surface termination groups drives the selectivity and activity of Mo-terminated carbidic surfaces in CO₂ hydrogenation.

The development of robust and efficient catalysts for CO₂ hydrogenation to value-added chemicals is an urgent task. Here the authors report two-dimensional carbide catalyst based on earth-abundant molybdenum that hydrogenates CO₂ with high activity, stable performance and tunable selectivity.

Quantification of Active Site Density and Turnover Frequency: From Single-Atom Metal to Nanoparticle Electrocatalysts

Single-atom catalysts (SACs) featuring atomically dispersed metal cations covalently embedded in a carbon matrix show significant potential to achieve high catalytic performance in various electrocatalytic reactions. Although considerable advances have been achieved in their syntheses and electrochemical applications, further development and fundamental understanding are limited by a lack of strategies that can allow the quantitative analyses of their intrinsic catalytic characteristics, that is, active site density (SD) and turnover frequency (TOF). Here we show an in situ SD quantification method using a cyanide anion as a probe molecule. The decrease in cyanide concentration triggered by irreversible adsorption on metal-based active sites of a model Fe-N-C catalyst is precisely measured by spectrophotometry, and it is correlated to the relative decrease in electrocatalytic activity in the model reaction of oxygen reduction reaction. The linear correlation verifies the surface-sensitive and metal-specific adsorption of cyanide on Fe-N x sites, based on which the values of SD and TOF can be determined. Notably, this analytical strategy shows versatile applicability to a series of transition/noble metal SACs and Pt nanoparticles in a broad pH range (1-13). The SD and TOF quantification can afford an improved understanding of the structure-activity relationship for a broad range of electrocatalysts, in particular, the SACs, for which no general electrochemical method to determine the intrinsic catalytic characteristics is available.

Surface phase structures responsible for the activity and deactivation of the fcc MoC (111)-Mo surface in steam reforming: a systematic kinetic and thermodynamic investigation

Multiscale investigation on MoC surface phase evolution to clarify surface structures responsible for reactivity and deactivation in steam reforming.

Relevant aspects of the conversion of guaiacol as a model compound for bio-oil over supported molybdenum oxycarbide catalysts

Molybdenum supported over activated carbon has been carburized under carbothermal hydrogen reduction conditions at different temperatures in order to modify the carburization degree and evaluated for guaiacol conversion.

Molybdenum and tungsten carbides can shine too

In this perspective, we argue that transition metal carbides such as molybdenum and tungsten hold great potential for the catalytic conversions of future feedstocks due to their ability to remain active in the presence of impurities in the feedstock.

Acetic acid hydrodeoxygenation on molybdenum carbide catalysts

Kinetics and site requirements of acetic acid hydrodeoxygenation on molybdenum carbide – a stable and selective catalyst under atmospheric hydrogen pressure.

Effect of Platinum, Gold, and Potassium Additives on the Surface Chemistry of CdI2-Antitype Mo2C

Transition metal carbides are versatile materials for diverse industrial applications including catalysis, where their relatively low cost is very attractive. In this work, we present a rather extensive density functional theory study on the energetics of adsorption of a selection of atomic and molecular species on two Mo terminations of the CdI₂ antitype phase of Mo₂C. Moreover, the coadsorption of CO in the presence of preadsorbed metal atoms and its dissociative adsorption in the absence and presence of preadsorbed Pt and K were investigated. By using CO as a probe to understand the structural/electronic effects of the preadsorption of the metal atoms on the Mo₂C(001) surface, we showed that K further enhances CO adsorption/activation on the surface, in contrast to the precious metals considered. Moreover, it was observed that the presence of both Pt and K stabilizes the transition state for the C-O bond dissociation, lowering the activation barrier for the dissociation of the C-O bond by about 0.3 and 0.4 eV, respectively.

Bifunctional Molybdenum Polyoxometalates for the Combined Hydrodeoxygenation and Alkylation of Lignin-Derived Model Phenolics

Reductive catalytic fractionation of biomass has recently emerged as a powerful lignin extraction and depolymerization method to produce monomeric aromatic oxygenates in high yields. Here, bifunctional molybdenum-based polyoxometalates supported on titania (POM/TiO₂ ) are shown to promote tandem hydrodeoxygenation (HDO) and alkylation reactions, converting lignin-derived oxygenated aromatics into alkylated benzenes and alkylated phenols in high yields. In particular, anisole and 4-propylguaiacol were used as model compounds for this gas-phase study using a packed-bed flow reactor. For anisole, 30 % selectivity for alkylated aromatic compounds (54 % C-alkylation of the methoxy groups by methyl balance) with an overall 72 % selectivity for HDO at 82 % anisole conversion was observed over H₃ PMo₁₂ O₄₀ /TiO₂ at 7 h on stream. Under similar conditions, 4-propylguaiacol was mainly converted into 4-propylphenol and alkylated 4-propylphenols with a selectivity to alkylated 4-propylphenols of 42 % (77 % C-alkylation) with a total HDO selectivity to 4-propylbenzene and alkylated 4-propylbenzenes of 4 % at 92 % conversion (7 h on stream). Higher catalyst loadings pushed the 4-propylguaiacol conversion to 100 % and resulted in a higher selectivity to propylbenzene of 41 %, alkylated aromatics of 21 % and alkylated phenols of 17 % (51 % C-alkylation). The reactivity studies coupled with catalyst characterization revealed that Lewis acid sites act synergistically with neighboring Brønsted acid sites to simultaneously promote alkylation and hydrodeoxygenation activity. A reaction mechanism is proposed involving activation of the ether bond on a Lewis acid site, followed by methyl transfer and C-alkylation. Mo-based POMs represent a versatile catalytic platform to simultaneously upgrade lignin-derived oxygenated aromatics into alkylated arenes.

Theoretical study about Mo2C(101)-catalyzed hydrodeoxygenation of butyric acid to butane for biomass conversion

To explore the conversion mechanism of fatty acids to long-chain alkanes using molybdenum carbide catalysts, the full potential energy surface of the hydrogenation of butyric acid to butane on the H-pre-covered hexagonal Mo₂C(101) surface has been systematically computed.

Exterior and small carbide particle promoted platinum electrocatalyst for efficient methanol oxidation

Carbides have a synergistic effect on noble metal based electrocatalysts.

Catalytic deoxygenation on transition metal carbide catalysts

We highlight the evolution and tunability of catalytic function of transition metal carbides under oxidative and reductive environments for selective deoxygenation reactions.