A facile in situ synthesis of highly active and reusable ternary Ag-PPy-GO nanocomposite for catalytic oxidation of hydroquinone in aqueous solution

Towards the design of mechanical flexible electrodes for sensing: Self-standing polypyrrole-copper nanocomposites

Self-standing electrodes with intrinsic conductivity and high electrocatalytic activity emerge as an alternative to existing sensors given their promising flexibility and wearability. Herein we demonstrate the fabrication of flexible sensors based on a hybrid nanocomposite of self-supported polypyrrole electrodes modified with copper nanoparticles (PPy-Cu) for the electrochemical detection of dopamine. The surface morphology and composition of flexible nanocomposite electrodes was studied using scanning electron microscopy (SEM), in combination with elemental mapping through energy dispersive X-ray spectroscopy (EDS). Surface characterization by X-ray photoelectron spectroscopy (XPS) revealed that copper exists in both Cu(0) and Cu(II) forms. The incorporation of copper nanoparticles in the self-standing polypyrrole matrix introduced additional electroactive sites, further enhancing charge transfer, and improving the device's sensitivity. The sensing capability of self-standing PPy-Cu electrodes was evaluated using chronoamperometric measurements and optimized at various copper electrodeposition times. PPy-Cu 120s showed great performance for dopamine sensing with a low limit of detection of 1.19 μM and a linear range of 2.5 μM-250 μM. Additionally, the self-standing sensor is comprised entirely of Polypyrrole, a biocompatible polymer, and Copper nanoparticles, making it sustainable and environmentally friendly. These encouraging results pave the way for the development of next-generation flexible sensors for the detection of neurotransmitters and environmentally relevant analytes.

Silver Nanoparticle-Embedded Conductive Hydrogels for Electrochemical Sensing of Hydroquinone

In this work, a conductive hydrogel was successfully synthesized, taking advantage of the high number density of active amino and hydroxyl groups in carboxymethyl chitosan and sodium carboxymethyl cellulose. These biopolymers were effectively coupled via hydrogen bonding with the nitrogen atoms of the heterocyclic rings of conductive polypyrrole. The inclusion of another biobased polymer, sodium lignosulfonate (LS), was effective to achieve highly efficient adsorption and in-situ reduction of silver ions, leading to silver nanoparticles that were embedded in the hydrogel network and used to further improve the electro-catalytic efficiency of the system. Doping of the system in the pre-gelled state led to hydrogels that could be easily attached to the electrodes. The as-prepared silver nanoparticle-embedded conductive hydrogel electrode exhibited excellent electro-catalytic activity towards hydroquinone (HQ) present in a buffer solution. At the optimum conditions, the oxidation current density peak of HQ was linear over the 0.1-100 μM concentration range, with a detection limit as low as 0.12 μM (signal-to-noise of 3). The relative standard deviation of the anodic peak current intensity was 1.37% for eight different electrodes. After one week of storage in a 0.1 M Tris-HCl buffer solution at 4 °C, the anodic peak current intensity was 93.4% of the initial current intensity. In addition, this sensor showed no interference activity, while the addition of 30 μM CC, RS, or 1 mM of different inorganic ions does not have a significant impact on the test results, enabling HQ quantification in actual water samples.

Self-Assembled Silver Nanoparticles Decorated on Exfoliated Graphitic Carbon Nitride/Carbon Sphere Nanocomposites as a Novel Catalyst for Catalytic Reduction of Cr(VI) to Cr(III) from Wastewater and Reuse for Photocatalytic Applications

Silver nanoparticles decorated on an exfoliated graphitic carbon nitride/carbon sphere (AgNP/Eg-C₃N₄/CS) nanocomposites were synthesized by an adsorption method with a self-assembled process. These nanoparticles were characterized by different techniques like UV-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), Raman spectroscopy, scanning electron spectroscopy (SEM), transmission electron spectroscopy (TEM), electrochemical impedance spectroscopy (EIS), and ζ potential. AgNP/Eg-C₃N₄/CS nanocomposites showed a higher catalytic reduction activity for the conversion of Cr(VI) into Cr(III) with formic acid (FA) at 45 °C when compared to bulk graphitic carbon nitride (Bg-C₃N₄, Eg-C₃N₄, CS, and Eg-C₃N₄/CS). The kinetic rate constants were determined as a function of catalyst dosage, concentration of Cr(VI), pH, and temperature for the AgNP/Eg-C₃N₄/CS nanocomposite. This material showed higher reduction efficiency (98.5%, k = 0.0621 min^-1) with turnover frequency (0.0158 min^-1) for the reduction of Cr(VI) to Cr(III). It also showed great selectivity and high stability after six repeated cycles (98.5%). Further, the reusability of the Cr(III)-AgNP/Eg-C₃N₄/CS nanocomposite was also investigated for the photocatalytic degradation of methylene blue (MB) under visible light irradiation with various time intervals and it showed good degradation efficiency (α = 97.95%). From these results, the AgNP/Eg-C₃N₄/CS nanocomposite demonstrated higher catalytic activity, improved environmental friendliness, lower cost for the conversion of toxic Cr(VI) to Cr(III) in solutions, and also good reusability.

Effective and reliable platform for nonenzymatic nanomolar-range quinol detection in water samples using ceria doped polypyrrole nanocomposite embedded on graphitic carbon nitride nanosheets

A glassy carbon electrode modification by a novel ternary nanocomposite of advantageously united ceria, polypyrrole, and graphitic carbon nitride (CeO₂/Ppy@g-C₃N₄) is reported here. It can be used to tailor the sensor surface for the electrochemical detection of nanomolar-level quinol (Qnl), a chemical widely used as a developing agent in photography and lithography, as a cosmetic, and as an antioxidant in rubber and food industries. The occupational exposure of Qnl may occur by inhalation or dermal contact, leading to lot of health hazards. The synthesized nanocomposite was characterized by various analytical techniques such as UV-Vis, Fourier transformed infrared (FTIR), X-ray powder diffraction, field emission scanning electron microscopy, high-resolution transmission electron microscopy, Raman, thermogravimetric analysis, energy-dispersive X-ray spectroscopy, selected area electron diffraction, and elemental mapping analyses. The oxidation current of Qnl is linear to its concentration in the range of 0.01-260 μM and the lowest detection and quantification limit are found to be 1.5 nM and 0.004 μM, respectively, with a sensitivity of 283.33 μA mM^-1 cm^-2. The performance of the modified electrode was compared with those of high-performance liquid chromatography, which indicates that the proposed sensor can be used as an effective and reliable platform for nano-molar detection of Qnl in various environmental and biological fluids.

Identification of key oxidative intermediates and the function of chromium dopants in PKU-8: catalytic dehydrogenation of sec-alcohols with tert-butylhydroperoxide

t-BuOO* activated by Cr-PKU-8 from TBHP is the key intermediate to the highly selective dehydrogenation of sec-alcohols.

Ultrasonic Assisted Synthesis of Size-Controlled Cu-Metal-Organic Framework Decorated Graphene Oxide Composite: Sustainable Electrocatalyst for the Trace-Level Determination of Nitrite in Environmental Water Samples

Excess levels of nitrite ion in drinking water interact with amine functionalized compounds to form carcinogenic nitrosamines, which cause stomach cancer. Thus, it is indispensable to develop a simple protocol to detect nitrite. In this paper, a Cu-metal-organic framework (Cu-MOF) with graphene oxide (GO) composite was synthesized by ultrasonication followed by solvothermal method and then fabricated on a glassy carbon (GC) electrode for the sensitive and selective determination of nitrite contamination. The SEM image of the synthesized Cu-MOF showed colloidosome-like structure with an average size of 8 μm. Interestingly, the Cu-MOF-GO composite synthesized by ultrasonic irradiation followed by solvothermal process produce controlled size of 3 μm colloidosome-like structure. This was attributed to the formation of an exfoliated sheet-like structure of GO by ultrasonication in addition to the obvious influence of GO providing the oxygen functional groups as a nucleation node for size-controlled growth. On the other hand, the composite prepared without ultrasonication exhibited 6.6 μm size agglomerated colloidosome-like structures, indicating the crucial role of ultrasonication for the formation of size-controlled composites. XPS results confirmed the presence of Cu(II) in the as-synthesized Cu-MOF-GO based on the binding energies at 935.5 eV for Cu 2p_3/2 and 955.4 eV for Cu 2p_1/2. The electrochemical impedance studies in [Fe(CN)₆]^3-/4- redox couple at the composite fabricated electrode exhibited more facile electron transfer than that with Cu-MOF and GO modified electrodes, which helped to utilize Cu-MOF-GO for trace level determination of nitrite in environmental effluent samples. The Cu-MOF-GO fabricated electrode offered a superior sensitive platform for nitrite determination than the Cu-MOF and GO modified electrodes demonstrating oxidation at less positive potential with enhanced oxidation current. The present sensor detects nitrite in the concentration range of 1 × 10^-8 to 1 × 10^-4 M with the lowest limit of detection (LOD) of 1.47 nM (S/N = 3). Finally, the present Cu-MOF-GO electrode was successfully exploited for nitrite ion determination in lake and dye contaminated water samples.

Ultrasonic energy-assisted in-situ synthesis of Ru0/PANI/g-C3N4 nanocomposite: Application for picomolar-level electrochemical detection of endocrine disruptor (Bisphenol-A) in humans and animals

Bisphenol A (BPA) is an endocrine-disrupting chemical which resembles structurally the hormone estrogen. Even a trace amount of BPA can bind estrogen receptors resulting in the inducement of reproductive disorders, cancers and problems related to sexual growth such as manliness in female and womanliness in male. So the determination of BPA in human and animal bodies is very essential. For this purpose, a new nanocomposite composed of ruthenium nanoparticles, polyaniline and graphitic carbon nitride (Ru⁰/PANI/g-C₃N₄) has been synthesized ultrasonically (40 ± 3 kHz, 200 W). A modification on glassy carbon electrode (GCE) with the nanocomposite detects BPA in human and animal urine samples with wide linear range (0.01-1.1 µM) and the limit of detection is pico molar-level. The synthesized nanocomposite was characterized by Ultraviolet-Visible and Fourier Transform-Infra Red spectroscopies, thermo gravimetric analysis, transmission electron microscopy, X-ray diffraction study, energy dispersive X-ray analysis, and elemental mapping analysis. This sensing system is selective, stable and reusable, by which the detection of BPA in various physiological fluids is very much possible.

Ultrasonic synthesis of CuO nanoflakes: A robust electrochemical scaffold for the sensitive detection of phenolic hazard in water and pharmaceutical samples

Hydroquinone (HQ), a phenolic compound is expansively used in many industrial applications and due to the utilization of HQ, water pollution tragedies frequently found by the improper handling and accidental outflows. When HQ is adsorbed directly through the skin that create toxic effects to human by affecting kidney, liver, lungs, and urinary tract and hence, a highly selective and sensitive technique is required for its quantification. Herein, we have developed the ultrasonic synthesis of copper oxide nanoflakes (CuO-NFs) using ultrasonic bath (20 kHz, 100 W) and successfully employed for the sensitive detection of the environmental hazardous pollutant HQ. The formed CuO-NFs were confirmed by X-ray diffraction, field emission scanning electron microscopy (FE-SEM), FT-IR spectroscopy and UV-visible spectroscopy and fabricated with the screen-printed carbon electrode (SPCE). The SEM images exhibited the uniform CuO-NFs with an average width of 85 nm. The linker-free CuO-NFs fabricated electrode showed the appropriate wide range of concentrations from 0.1 to 1400 µM and the limit of detection was found to be 10.4 nM towards HQ. The fabricated sensor having long term stability and sensitivity was successfully applied for the environmental and commercial real sample analysis and exhibited good recovery percentage, implying that the SPCE/CuO-NFs is an economically viable and benign robust scaffold for the determination of HQ.

Sunlight-Driven Photothermal Effect of Composite Eggshell Membrane Coated with Graphene Oxide and Gold Nanoparticles

Eggshell membrane (ESM), which consists of unique interwoven shell membrane fibers, provides a unique supporting platform for functional nanoparticles in catalysis and sensing. This work reports a novel strategy for fabricating sunlight-driven photothermal conversion composite membranes by loading graphene oxide (GO) and gold nanoparticles (AuNPs) on the three-dimension (3D) network structured eggshell membrane. Surface morphologies and chemical elements were characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. High photothermal conversion under simulated sunlight irradiation, which may be caused by the synergistic effect of GO and AuNPs, was achieved by coating both GO and AuNPs onto ESM. The temperature of ESM modified with AuNPs, and then GO increased from 26.0 °C to 49.0 °C after 10 min of light irradiation. Furthermore, the nanoscaled GO and AuNPs could add benefit to the heating localization of the obtained composite membrane. It is expected this biocompatible ESM modified with GO and AuNPs would have great potential in drug release and photothermal therapy applications.

Clean synthesis of RGO/Mn3O4 nanocomposite with well-dispersed Pd nanoparticles as a high-performance catalyst for hydroquinone oxidation

In this study, a well-dispersed Pd nanoparticle (NP)-supported RGO/Mn₃O₄ (G/M/Pd) composite was synthesized by a clean synthetic route, where galvanic replacement reaction simply occurred between Mn₃O₄ and a palladium salt, thereby avoiding the use of harsh reducing and capping agents. The G/M/Pd composite served as a robust catalyst for the catalytic oxidation of hydroquinone (HQ) to benzoquinone (BQ) with H₂O₂ in an aqueous solution. Oxidation was completed in only 4 min, with a turnover frequency (TOF) of 3613 h^-1; this TOF is one hundred times those of previously reported Pd- and Ag-based catalysts. The superior performance was related to the electronic inductive effect between Mn₃O₄ and Pd NPs, which was verified by density functional theory calculations. Trapping experiments revealed that the oxidation of HQ was considerably related to the ·OH radicals generated from the decomposition of H₂O₂. In addition, the influencing factors were further investigated, including catalyst and HQ concentrations, solution pH, solvents, and various inorganic and organic interferences. Moreover, the G/M/Pd catalyst exhibits diverse applications for the catalytic oxidation of HQ derivatives with high TOFs.

Rational design of a polypyrrole-based competent bifunctional magnetic nanocatalyst

The combination of conducting polymers with semiconductors for the fabrication of organic/inorganic hybrid nanocatalysts is one of the most promising research areas for many applications. In this work, the synthesized nanocomposite combines several advantages such as the photoresponse shift from the UV region toward visible light by narrowing the band gap of the semiconductor, magnetic separation ability and dual applications including the catalytic reduction of p-nitrophenol (PNP) and the photocatalytic degradation of methylene blue (MB) dye. In addition to the core magnetite nanoparticles (NPs), the synthesized nanocomposite contains polypyrrole (PPY) and TiO₂ shells that are decorated with silver metal NPs to prevent electron–hole recombination and to enhance the catalytic performance. Indeed, the catalytic PNP reduction experiments reveal that the synthesized nanocomposite exhibits significantly high catalytic activity with a rate constant of 0.1169 min⁻¹. Moreover, the photocatalytic experiments show that the synthesized nanophotocatalyst has a boosting effect toward MB dye degradation under normal daytime visible light irradiation with a rate constant of 6.38 × 10⁻² min⁻¹. The synergetic effect between silver NPs, PPY and TiO₂ is thought to play a fundamental role in enhancing the photocatalytic activity.

An efficient method to synthesize a magnetic nanocomposite with dual catalytic activities with a synergetic effect between Ag nanoparticles, polypyrrole and TiO₂ is described.

Synthesis of AuNPs@RGO nanosheets for sustainable catalysis toward nitrophenols reduction

A facile, green and one-pot synthesis strategy for the convenient preparation of well-dispersed gold nanoparticles (AuNPs) decorated reduced graphene oxide (RGO) without using any other toxic chemicals and reductants is reported herein. The synthesized AuNPs@RGO hybrid nanomaterials were characterized by UV-visible absorption spectroscopy, FT-IR, XRD, Raman, SEM, TEM and EDX analysis. The AuNPs@RGO acts as an efficient catalyst for the reduction of organic nitroaromatics (2- & 4-nitro phenols) in the presence of NaBH₄. This newly synthesized hybrid AuNPs@RGO has superior catalytic activity over any other Au-nanomaterials ever reported. The rate of nitro aromatics reduction is found to be dependent on concentrations of substrate, reductant and catalyst. The mechanisms for the synthesis and catalytic reduction have been studied and discussed.

Engineered Artificial Nanochannels for Nitrite Ion Harmless Conversion

Inspired by the delicate functions of living organisms to transport or transform nitrite ions (NO₂^-), a bioinspired smart nanochannel that can realize harmless conversion of NO₂^- into N₂ is developed by immobilizing a NO₂^--responsive functional molecule, p-phenylenediamine, onto a single conical polyethylene terephthalate nanochannel. Subsequently, the aromatic primary amine groups could be triggered to transform into a phenyldiazonium molecule based on the acid-activated NO₂^--binding process. The nanochannel exhibits specific selectivity and highly ultratrace recognition of NO₂^-. Fascinatingly, the transformed phenyldiazonium molecules could be triggered to generate phenol groups and release N₂ by ultraviolet light activation, achieving NO₂^- harmless conversion. This system could provide inspiration to construct artificial nanofluidic devices for ion-sensing and nitrogen cycle fields.

A novel highly selective and sensitive detection of serotonin based on Ag/polypyrrole/Cu2O nanocomposite modified glassy carbon electrode

A silver/polypyrrole/copper oxide (Ag/PPy/Cu₂O) ternary nanocomposite was prepared by sonochemical and oxidative polymerization simple way, in which Cu₂O was decorated with Ag nanoparticles, and covered by polyprrole (PPy) layer. The as prepared materials was characterized by UV-vis-spectroscopy (UV-vis), FT-IR, X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM) with EDX, high resolution transmission electron microscopy (HR-TEM) and X-ray photoelectron spectroscopy (XPS). Sensing of serotonin (5HT) was evaluated electrocatalyst using polypyrrole/glassy carbon electrode (PPy/GCE), polypyrrole/copper oxide/glassy carbon electrode (PPy/Cu₂O/GCE) and silver/polypyrrole/copper oxide/glassy carbon electrode (Ag/PPy/Cu₂O/GCE). The Ag/PPy/Cu₂O/GCE was electrochemically treated in 0.1MPBS solution through cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The peak current response increases linearly with 5-HT concentration from 0.01 to 250 µmol L^-1 and the detection limit was found to be 0.0124 μmol L^-1. It exhibits high electrocatalytic activity, satisfactory repeatability, stability, fast response and good selectivity against potentially interfering species, which suggests its potential in the development of sensitive, selective, easy-operation and low-cost serotonin sensor for practical routine analyses. The proposed method is potential to expand the possible applied range of the nanocomposite material for detection of various concerned electro active substances.

A simple sonochemical approach to fabricate a urea biosensor based on zinc phthalocyanine/graphene oxide/urease bioelectrode

A novel zinc phthalocyanine/graphene oxide (ZnPh/GO) nanocomposite modified glassy carbon electrode (GCE) was prepared by using sonochemical approach and simple drop casting method. Urease (Urs) was used as the specific enzyme for urea detection and was physically immobilized onto the surface of ZnPh/GO nanocomposite. The fabricated ZnPh/GO/Urs matrix was successfully characterized by UV-vis-spectroscopy, FT-IR spectroscopy, scanning electron microscopy (SEM), raman spectrum, thermogravimetric analysis, cyclic voltammetric (CV) and amperometric techniques. The electrocatalytic performance of the ZnPh/GO/Urs electrode was investigated by urea biosensor. Our results demonstrate that the modified electrode has excellent electrocatalytic activity towards the sensing of urea in 0.1 M phosphate buffer solution (PBS, pH 7.2). The biosensor tolerated a wide linear concentration range for urea from 0.4 to 22 μM (R² = 0.991), with a detection limit of 0.034 µM (S/N = 3). The ZnPh/GO/Urs bioectrode has several excellent properties, including a fast response time, high reproducibility and stability.

Fabrication of g-C3N4/NiO heterostructured nanocomposite modified glassy carbon electrode for quercetin biosensor

Herein, we report a one-pot synthesis of structurally uniform and electrochemically active graphitic carbon nitride/nickel oxide (g-C₃N₄/NiO) nanocomposite and an investigation on the electrocatalytic oxidation of quercetin (QR). The synthesized g-C₃N₄/NiO nanocomposite has uniform surface distribution, which was characterized with scanning electron microscopy (SEM). Moreover, the composition of synthesized g-C₃N₄/NiO nanocomposite was characterized by UV-vis-spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR spectra), BET, SEM and HRTEM. The g-C₃N₄/NiO was electrochemically treated in 0.1 MPBS solution through cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The peak current response increases linearly with QR concentration from 0.010 μM to 250 µM with a fast response time of less than 2 s and a detection limit of 0.002 μM. To further evaluate the feasibility of using this sensor for real sample analysis, QR content in various real samples including green tea, green apple, honey suckle were determined and satisfactory results were achieved.

Efficacious separation of electron-hole pairs in CeO2-Al2O3 nanoparticles embedded GO heterojunction for robust visible-light driven dye degradation

Herein, we have developed a facile and one pot synthesis of ternary CeO₂-Al₂O₃@GO nanocomposite via wet chemical method. The structural and morphological characteristics of the synthesized nanocomposite was investigated using UV-DRS, FT-IR, XRD, FE-SEM, HR-TEM, EDX and TGA analysis. The CeO₂-Al₂O₃@GO composite was tested for its ability to photocatalytically degrade Rhodamine B (RhB) under visible light illumination. The influence of various operational parameters such as pH, catalyst dosage and initial dye concentration on the photo degradation was investigated in detail. The synthesized CeO₂-Al₂O₃@GO composite shows greater photocatalytic degradation of RhB (99.0%) under visible light irradiation than the raw CeO₂, Al₂O₃, and GO catalysts and any other reported nanocomposite materials. The recyclability results also demonstrate the excellent stability and reusability of the CeO₂-Al₂O₃@GO nanocomposite. This work will be beneficial in the field of industrial and engineering applications in the degradation of organic pollutants. Also, a study of this kind will definitely stimulate many researches in the recently emerging field of solar-driven water splitting.

Catalytic hydrogenation performance of an in situ assembled Au@g-C3N4–PANI nanoblend: synergistic inter-constituent interactions boost the catalysis

A novel gold–graphitic carbon nitride–polyaniline (Au@g-C₃N₄–PANI) nanoblend was synthesized via in situ oxidative polymerization of aniline using auric acid as an oxidant in the presence of g-C₃N₄.