Oxidative C(OH) C bond cleavage of secondary alcohols to acids over a copper catalyst with molecular oxygen as the oxidant

Selective Depolymerization of Lignin Towards Isolated Phenolic Acids Under Mild Conditions

The selective transformation of lignin to value-added biochemicals (e. g., phenolic acids) in high yields is incredibly challenging due to its structural complexity and many possible reaction pathways. Phenolic acids (PA) are key building blocks for various aromatic polymers, but the isolation of PAs from lignin is below 5 wt.% and requires harsh reaction conditions. Herein, we demonstrate an effective route to selectively convert lignin extracted from sweet sorghum and poplar into isolated PA in a high yield (up to 20 wt.% of lignin) using a low-cost graphene oxide-urea hydrogen peroxide (GO-UHP) catalyst under mild conditions (<120 °C). The lignin conversion yield is up to 95 %, and the remaining low molecular weight organic oils are ready for aviation fuel production to complete lignin utilization. Mechanistic studies demonstrate that pre-acetylation allows the selective depolymerization of lignin to aromatic aldehydes with a decent yield by GO through the Cα activation of β-O-4 cleavage. A urea-hydrogen peroxide (UHP) oxidative process is followed to transform aldehydes in the depolymerized product to PAs by avoiding the undesired Dakin side reaction due to the electron-withdrawing effect of the acetyl group. This study opens a new way to selectively cleave lignin side chains to isolated biochemicals under mild conditions.

Recent advances in computational studies on Cu-catalyzed aerobic reactions: cooperation of copper catalysts and dioxygen

O2, one of the ideal oxidants, suffers from low solubility, low oxidizability, low selectivity and a triplet ground state when applied in organic synthesis. Biomimetic copper catalysis has been demonstrated to be a powerful method for activating and transforming O2 to conduct aerobic reactions for a long time. On the other hand, the structures of Cu-O2 complexes are complex with diverse downstream reactions, whereas active copper intermediates were rarely identified by experimental methods, making the mechanisms of many Cu-catalyzed aerobic reactions far from clear. In this context, computational studies emerged as an effective alternative to mechanistic studies on Cu-catalyzed aerobic reactions. This review introduces the relevant computational studies since 2012, focusing on showing the cooperation of copper catalysts and O2 in dehydrogenation, oxygenation and coupling reactions.

Aerobic oxidative C-C bond cleavage and functionalization for the synthesis of value-added chemicals

The aerobic oxidative cleavage of C-C bonds is an attractive and sustainable route for constructing valuable molecules such as esters, nitriles, and amides. Traditionally homogeneous catalytic systems for C-C bond cleavage required harsh conditions, stoichiometric oxidants, and noble metal catalysts to overcome the thermodynamic and kinetic barriers of C-C bonds, imposing environmental concerns of the transformation. Therefore, developing efficient, low-cost, and environmentally benign methods for C-C bond cleavage is of great importance and a cutting-edge area in modern chemistry. This feature article summarizes the sustainable aerobic oxidative C-C bond cleavage method developed by our group in the past 5 years. Fundamental principles in catalyst design, substrate scope, and mechanism for C-C bond cleavage are also discussed.

Aerobic Oxidative Cleavage of C(OH)-C Bonds to Produce Aromatic Aldehydes Catalyzed by CuI -1,10-phenanthroline Complex

Effective cleavage and functionalization of C(OH)-C bonds is of great importance for the production of value-added chemicals from renewable biomass resources such as carbohydrates, lignin and their derivatives. The efficiency and selectivity of oxidative cleavage of C(OH)-C bonds are hindered by their inert nature and various side reactions associated with the hydroxyl group. The oxidative conversion of secondary alcohols to produce aldehydes is particularly challenging because the generated aldehydes tend to be over-oxidized to acids or the other side products. Noble-metal based catalysts are necessary to get satisfactory aldehyde yields. Herein, for the first time, the efficient aerobic oxidative conversion of secondary aromatic alcohols into aromatic aldehydes is reported using non-noble metal catalysts and environmentally benign oxygen, without any additional base. It was found that CuI -1,10-phenanthroline (Cu-phen) complex showed outstanding performance for the reactions. The C(OH)-C bonds of a diverse array of aromatic secondary alcohols were effectively cleaved and functionalized, selectively affording aldehydes with excellent yields. Detailed mechanism study revealed a radical mediated pathway for the oxidative reaction. We believe that the findings in this work will lead to many explorations in non-noble metal catalyzed oxidative reactions.

Cobalt nanoparticles-catalyzed aerobic oxygenation and esterification of alkynes via C≡C bonds cleavage

An unprecedented efficient protocol is developed for the oxidative cleavage of C≡C bonds in alkynes to produce structure-diverse esters using heterogeneous cobalt nanoparticles as catalyst with molecular oxygen as the oxidant. A diverse set of mono- and multisubstituted aromatic and aliphatic alkynes can be effectively cleaved and converted into the corresponding esters. Characterization analysis and control experiments indicate high surface area and pore volume, as well as nanostructured nitrogen-doped graphene-layer coated cobalt nanoparticles are possibly responsible for excellent catalytic activity. Mechanistic studies reveal that ketones derived from alkynes under oxidative conditions are formed as intermediates, which subsequently are converted to esters through a tandem sequential process. The catalyst can be recycled up to five times without significant loss of activity.

Direct conversion of lignin to functionalized diaryl ethers via oxidative cross-coupling

Efficient valorization of lignin, a sustainable source of functionalized aromatic products, would reduce dependence on fossil-derived feedstocks. Oxidative depolymerization is frequently applied to lignin to generate phenolic monomers. However, due to the instability of phenolic intermediates, repolymerization and dearylation reactions lead to low selectivity and product yields. Here, a highly efficient strategy to extract the aromatic monomers from lignin affording functionalized diaryl ethers using oxidative cross-coupling reactions is described, which overcomes the limitations of oxidative methods and affords high-value specialty chemicals. Reaction of phenylboronic acids with lignin converts the reactive phenolic intermediates into stable diaryl ether products in near-theoretical maximum yields (92% for beech lignin and 95% for poplar lignin based on the content of β-O-4 linkages). This strategy suppresses side reactions typically encountered in oxidative depolymerization reactions of lignin and provides a new approach for the direct transformation of lignin into valuable functionalized diaryl ethers, including key intermediates in pharmaceutical and natural product synthesis.

The Formation of a Unique 2D Isonicotinate Polymer Driven by Cu(II) Aerobic Oxidation

The isolation and structural characterization of a unique Cu(II) isonicotinate (ina) material with 4-acetylpyridine (4-acpy) is provided. The formation of [Cu(ina)₂(4-acpy)]_n (1) is triggered by the Cu(II) aerobic oxidation of 4-acpy using O₂. This gradual formation of ina led to its restrained incorporation and hindered the full displacement of 4-acpy. As a result, 1 is the first example of a 2D layer assembled by an ina ligand capped by a monodentate pyridine ligand. The Cu(II)-mediated aerobic oxidation with O₂ was previously demonstrated for aryl methyl ketones, but we extend the applicability of this methodology to heteroaromatic rings, which has not been tested so far. The formation of ina has been identified by ¹H NMR, thus demonstrating the feasible but strained formation of ina from 4-acpy in the mild conditions from which 1 was obtained.

Protocol for the preparation of amorphous manganese oxide and its application as heterogeneous catalyst in the direct synthesis of amides and nitriles

The cleavage and functionalization of carbon-carbon (C–C) bonds has emerged as a powerful tool for preparing value-added chemicals. In this protocol, we describe the preparation of amorphous manganese oxide and its application as a heterogeneous catalyst in the direct synthesis of amides via successive cleavage and amidation of C–C bonds in alcohols. Furthermore, we describe how a slight modification of reaction conditions allows for the cleavage and cyanation of alcohols to access sterically hindered nitriles.

For complete details on the use and execution of this protocol, please refer to He et al. (2022).

•

Heterogeneous MnO_x-catalyzed cleavage and amidation/cyanation of alcohols

•

Convenient preparation of MnO_x in large scale

•

Recycling and reusing of MnO_x

•

Wide substrate scope and gram-scale synthesis allowable

Publisher’s note: Undertaking any experimental protocol requires adherence to local institutional guidelines for laboratory safety and ethics.

Selective Degradation of Styrene-Related Plastics Catalyzed by Iron under Visible Light*

Efficient degradation of plastics, the vital challenge for a sustainable future, stands in need of better chemical recycling procedures that help produce commercially valuable small molecules and redefine plastic waste as a rich source of chemical feedstock. However, the corresponding chemical recycling methods, while being generally restricted to polar polymers, need improvement. Particularly, degradation of chemically inert nonpolar polymers, the major constitutes of plastics, suffers from low selectivity and very harsh transformation conditions. Herein, an efficient method was developed for selective degradation of styrene-related plastics under gentle conditions through multiple oxidation of sp³ C-H bonds and sp³ C-C bonds. The procedure was catalyzed with inexpensive iron salts under visible light, using oxygen as green oxidant. Furthermore, simple iron salts could be used to degrade plastics in the absence of solvent under natural conditions, highlighting the potential application of iron salts as additives for degradable plastics.

Oxidative α-C-C Bond Cleavage of 2° and 3° Alcohols to Aromatic Acids with O2 at Room Temperature via Iron Photocatalysis

The selective α-C-C bond cleavage of unfunctionalized secondary (2°) and tertiary alcohols (3°) is essential for valorization of macromolecules and biopolymers. We developed a blue-light-driven iron catalysis for aerobic oxidation of 2° and 3° alcohols to acids via α-C-C bond cleavages at room temperature. The first example of oxygenation of the simple tertiary alcohols was reported. The iron catalyst and blue light play critical roles to enable the formation of highly reactive O radicals from alcohols and the consequent two α-C-C bond cleavages.

Selective valorization of lignin to phenol by direct transformation of Csp2-Csp3 and C-O bonds

Phenol is an important commodity chemical in the industry, which is currently produced using fossil feedstocks. Here, we report a strategy to produce phenol from lignin by directly deconstructing C_sp2-C_sp3 and C-O bonds under mild conditions. It was found that zeolite catalyst could efficiently catalyze both the direct C_sp2-C_sp3 bond breakage to remove propyl structure and aliphatic β carbon-oxygen (C_β-O) bond hydrolysis to form OH group on the aromatic ring. The yield of phenol could reach 10.9 weight % with a selectivity of 91.8%. In this unique route, water was the only reactant besides lignin. A scale-up experiment showed that 4.1 g of pure phenol could be obtained from 50.0 g of lignin. The reaction pathway was proposed by a combination of control experiments and density functional theory studies. This work opens the way for producing phenol from lignin by direct transformation of C_sp2-C_sp3 and C-O bonds in lignin.

Cobalt Nanoparticles-Catalyzed Widely Applicable Successive C-C Bond Cleavage in Alcohols to Access Esters

Selective cleavage and functionalization of C-C bonds have important applications in organic synthesis and biomass utilization. However, functionalization of C-C bonds by controlled cleavage remains difficult and challenging because they are inert. Herein, we describe an unprecedented efficient protocol for the breaking of successive C-C bonds in alcohols to form esters with one or multiple carbon atoms less using heterogeneous cobalt nanoparticles as catalyst with dioxygen as the oxidant. A wide range of alcohols including inactive long-chain alkyl aryl alcohols undergo smoothly successive cleavage of adjacent -(C-C)_n - bonds to afford the corresponding esters. The catalyst was used for seven times without any decrease in activity. Characterization and control experiments disclose that cobalt nanoparticles are responsible for the successive cleavage of C-C bonds to achieve excellent catalytic activity, while the presence of Co-N_x has just the opposite effect. Preliminary mechanistic studies reveal that a tandem sequence reaction is involved in this process.

Dehydroxyalkylative halogenation of C(aryl)-C bonds of aryl alcohols

We herein report Cu mediated side-directed dehydroxyalkylative halogenation of aryl alcohols. C(aryl)-C bonds of aryl alcohols were effectively cleaved, affording the corresponding aryl chlorides, bromides and iodides in excellent yields. Aryl alcohols could serve as both aromatic electrophilic and radical synthetic equivalents during the reaction.

Synthesis of thioethers, arenes and arylated benzoxazoles by transformation of the C(aryl)-C bond of aryl alcohols

Transformation of aryl alcohols into high-value functionalized aromatic compounds by selective cleavage and functionalization of the C(aryl)–C(OH) bond is of crucial importance, but very challenging by far. Herein, for the first time, we report a novel and versatile strategy for activation and functionalization of C(aryl)–C(OH) bonds by the cooperation of oxygenation and decarboxylative functionalization. A diverse range of aryl alcohol substrates were employed as arylation reagents via the cleavage of C(aryl)–C(OH) bonds and effectively converted into corresponding thioether, arene, and arylated benzoxazole products in excellent yields, in a Cu based catalytic system using O₂ as the oxidant. This study offers a new way for aryl alcohol conversion and potentially offers a new opportunity to produce high-value functionalized aromatics from renewable feedstocks such as lignin which features abundant C(aryl)–C(OH) bonds in its linkages.

Aryl alcohols served as aryl agents by effective activation of C(aryl)–C(OH) bonds, and were transformed into corresponding thioether, arene, and arylated benzoxazole products in excellent yields.

Catalytic Lignin Depolymerization to Aromatic Chemicals

In recent decades, research on lignin depolymerization and its downstream product transformation has drawn an enormous amount of attention from academia to industry worldwide, aiming at harvesting aromatic compounds from this abundant and renewable biomass resource. Although the lignin conversion can be traced back to the 1930s and various noncatalytic and catalytic methods have been explored to depolymerize lignin via direct lignin conversion research or lignin models conversion studies, the complexity of the lignin structure, various linkages, the high stability of lignin bonds, and the diverse fragments condensation process make lignin depolymerization to monomers a highly challenging task. For the potential practical utilization of lignin, compared with lignin conversion to liquid fuel with extra H₂ consumption, maintaining the aromatic structure and preparing high-value aromatic chemicals from renewable lignin is more profitable. Therefore, lignin depolymerization to easy-to-handle aromatic monomers with acceptable conversion and selectivity is of great importance. In this article, we present our recent studies on lignin's catalytic conversion to aromatic chemicals. First, we introduce our research on protolignin depolymerization via a fragmentation-hydrogenolysis process in alcohol solvents. Then, focusing on the catalytic cleavage of lignin C-C and C-O bonds, we shed light on a recapitulative adjacent functional group modification (AFGM) strategy for the conversion of lignin models. AFGM strategy begins with the adjacent functional group modification of the target C-C or C-O bond to directly decrease the bond dissociation enthalpy (BDE) of targeted bonds or generate new substrate sites to introduce the cleavage reagent for further conversion. Subsequently, on the basis of these two concepts from AFGM, we summarize our strategies on lignin depolymerization, which highlight the effects of lignin structure, catalyst character, and reaction conditions on the efficiency of strategies. In short, the key point for lignin depolymerization to aromatics is promoting the lignin conversion and restraining the condensation. Compared with the complex research on direct lignin conversion, this bottom-up research approach, beginning with lignin model research, can make the conversion mechanism study clear and provide potential methods for the protolignin/technical lignin conversion. In addition, one of our perspectives for lignin utilization is that the products from lignin conversion can be used as monomers for artificial polymerization, such as the simple phenol (PhOH) and other potential acid compounds, or that lignin derivative molecules can be used to synthesize high-value synthetic building blocks.

Acyl radical to rhodacycle addition and cyclization relay to access butterfly flavylium fluorophores

Transition metal-catalyzed C–H activation and radical reactions are two versatile strategies to construct diverse organic skeletons. Here we show the construction of a class of flavylium fluorophores via the merge of radical chemistry and C–H activation starting from (hetero)aryl ketones and alkynes. This protocol is not only applicable to aryl ketones but also to heteroaryl ketones such as thiophene, benzothiophene and benzofuran, thus leading to structural diversity. Mechanism studies, including control experiments, intermediate separation, radical trapping, EPR and ESI-HRMS experiments, demonstrate that the key step lies in the addition of the acyl radical generated by the copper-catalyzed C–C bond cleavage of aryl ketone to the rhodacycle formed via the C–H activation of aryl ketone. The flavylium fluorophores feature butterfly symmetrical configuration, nearly planar skeleton and delocalized positive charge, and exhibit intriguing photophysical properties, such as tunable absorption and emission wavelengths and high quantum yields.

Structural diversity of organic fluorophores is of importance for several applications (fluorescent markers, photosensitizers, etc.). Here the authors report a method to merge radical chemistry with C–H activation to construct a brand-new class of flavylium fluorophores starting from (hetero)aryl ketones and alkynes.

Catalytic Scissoring of Lignin into Aryl Monomers

Lignin is an aromatic polymer, which is the biggest and most sustainable reservoir for aromatics. The selective conversion of lignin polymers into aryl monomers is a promising route to provide aromatics, but it is also a challenging task. Compared to cellulose, lignin remains the most poorly utilized biopolymer due to its complex structure. Although harsh conditions can degrade lignin, the aromatic rings are usually destroyed. This article comprehensively analyzes the challenges facing the scissoring of lignin into aryl monomers and summarizes the recent progress, focusing on the strategies and the catalysts to address the problems. Finally, emphasis is given to the outlook and future directions of this research.

Metal-Free Aerobic Oxidative Selective C-C Bond Cleavage in Heteroaryl-Containing Primary and Secondary Alcohols

A transition-metal-free aerobic oxidative selective C-C bond-cleavage reaction in primary and secondary heteroaryl alcohols is reported. This reaction was highly efficient and tolerated various heteroaryl alcohols, generating a carboxylic acid derivative and a neutral heteroaromatic compound. Experimental studies combined with density functional theory calculations revealed the mechanism underlying the selective C-C bond cleavage. This strategy also provides an alternative simple approach to carboxylation reaction.

Cleavage of lignin model compounds and ligninox using aqueous oxalic acid

Aqueous oxalic acid cleaves oxidised β-O-4 lignin model compounds by two distinct mechanisms that are dependent on the presence of the hydroxymethyl substituent.

Stepwise degradation of hydroxyl compounds to aldehydes via successive C–C bond cleavage

Stepwise degradation of hydroxyl compounds to aldehydes via successive cleavage of C–C bonds was achieved by using a bimetallic catalytic system (PdCl₂ + CuCl) without any ligands and additives.

Iron-catalyzed oxidative C–C(vinyl) σ-bond cleavage of allylarenes to aryl aldehydes at room temperature with ambient air

The iron-catalyzed C−C single bond cleavage and oxidation of allylarenes without the assistance of heteroatoms/directing groups to produce aryl aldehydes is disclosed.

Copper-catalyzed domino sequences: a new route to pyrido-fused quinazolinones from 2'-haloacetophenones and 2-aminopyridines

A new pathway to access pyrido-fused quinazolinones via a Cu(OAc)2-catalyzed domino sequential transformation between 2'-haloacetophenones and 2-aminopyridines was demonstrated. The solvent and base exhibited a remarkable effect on the transformation, in which the combination of DMSO and NaOAc emerged as the best system. Cu(OAc)2·H2O was more active towards the reaction than numerous other catalysts. This methodology is new and would be complementary to previous protocols for the synthesis of pyrido-fused quinazolinones.

Directing group assisted copper-mediated aroylation of phenols using 2-bromoacetophenones

A new directing group assisted method for the synthesis of aryl esters is described. In this Cu(ii)-mediated reaction, 2-formylphenols and 2-acetylphenols are easily converted into aryl esters via treatment with a new aroylating agent 2-bromoacetophenone. In addition, a new external bromine free method for the synthesis of important synthons 2,2-dibromoacetophenones from 2-bromoacetophenones is described.

Promoting effect of solvent on Cu/CoO catalyst for selective glycerol oxidation under alkaline conditions

Cu/CoO catalysts were employed for the selective oxidation of glycerol in the aqueous phase under basic conditions.

Selective glycerol oxidation over ordered mesoporous copper aluminum oxide catalysts

Ordered mesoporous Cu–Al₂O₃ catalysts were employed for the selective oxidation of glycerol into value-added products. Co-solvents such as ethanol, 1-propanol, and tert-butanol strongly improve the reaction kinetics.