Multifunctional Cu/Ag quantum dots on TiO 2 nanotubes as highly efficient photocatalysts for enhanced solar hydrogen evolution

Recent developments in atomically precise metal nanocluster-based photocatalysts for hydrogen production

Photocatalytic hydrogen production offers a sustainable approach for utilising light energy, providing a promising solution to global energy challenges. The efficiency of this process relies on developing photocatalysts with broad light responsiveness and effective charge carrier separation capabilities. Atomically precise metal nanoclusters (NCs) have emerged as a highly favourable class of materials for this role due to their unique atomic arrangements, ultrasmall size, quantum confinement effects, and plenty of surface-active sites. These exceptional properties endow NCs with semiconductor-like behaviour, allowing for the generation of electrons and holes under light excitation, thus driving the hydrogen production reaction. Moreover, their robust light-absorption properties across the UV to near-IR spectrum, coupled with tuneable optical properties controlled by their composition and structure, promise NCs as next-generation photocatalysts. This review explores recent developments in the application of NCs for photocatalytic hydrogen production, emphasising strategies to enhance charge carrier separation and transfer efficiency, as well as photostability. The discussion also highlights the challenges and future opportunities in using NCs for efficient hydrogen production.

Synthesis of Ag/Cu decorated 3D self-assembled nanowire TiO2 photocatalyst for hydrogen production: a promising pathway towards sustainable energy generation

Here, synthesis and characterization of TiO2 with different morphologies along with the cost-effective bimetallic decoration on optimized 3D self-assembled nanowire TiO2 (NWT) photocatalyst (Ag/Cu-NWT) with overwhelming hydrogen production rate is reported. All the photocatalysts were well characterized by different characterization techniques. Initially, the effect of morphology change obtained by changing the NaOH concentration has been studied for TiO2. Morphology obtained at 10 M NaOH solution, i.e., NWT (678 μmol/g), showed better hydrogen production than morphology obtained at 5 M (410 μmol/g), 15 M (210 μmol/g), and 20 M (160 μmol/g) NaOH solutions. Further, with the aim to achieve comparable or better activity low-cost photocatalyst as compared to Pt-TiO2 system, NWT was decorated with various Cu percentages and then with a minimal percentage of Ag on an optimized Cu-NWT photocatalyst. The observed trend for photocatalytic hydrogen production has been found to be P25 TiO2 < NWT < 1.0Cu-NWT < 0.5Pt-NWT ≤ 0.1Ag/1.0Cu-NWT. The marked increase by a factor of 103 in hydrogen production for the optimized bimetallic 0.1Ag/1.0Cu-NWT (10,184 μmol/g) photocatalyst compared to P25 TiO2 (99 μmol/g), nearly threefold increment in hydrogen production than an optimized 1.0 Cu-NWT (3907 μmol/g) photocatalyst and comparable hydrogen production as compared to 0.5Pt-NWT (10,050 μmol/g) may be attributed to the successful synthesis of a highly porous NWT morphology, which offers large surface area, increased light absorption combined with the synergistic effects of surface plasmon resonance (SPR), and the Schottky barrier for H+ reduction to H2 gas. The optimization of TiO2 morphology and an inexpensive bimetallic decoration strategy opens up promising opportunities for the development of cost-effective photocatalysts in the realm of energy and environment.

Promoted photocatalytic N2 fixation to ammonia over floatable TiO2/Bi/Carbon cloth through relay pathway

The floatable photocatalyst at N2-water interface allows the adequate supply of N2 reactant and the utilization of photothermal energy for photocatalytic N2 fixation, however, the presence of non-volatile NO3- product poses a challenge to the stability as it easily covers the catalytic active sites. Herein, a floatable TiO2/Bi/CC (Carbon cloth) photocatalyst was designed, in which the non-volatile NO3- can be transformed to the volatile NH3 via the newly synergistic relay photocatalysis pathway (N2 → NO3- → NH3) between TiO2 (N2 → NO3-) and Bi (NO3- → NH3). Attractively, the spontaneous NO3- → NO2- step occurs on Bi component to promote the relay pathway performing. Therefore, TiO2/Bi/CC system displays better long-term stability than TiO2/CC, and moreover, it achieves a higher NH3 yield of 8.28 mmol L-1 h-1 g-1 (i.e. 4.14 mmol h-1 m-2) than that 1.46 mmol L-1 h-1 g-1 for TiO2/Bi powder. Importantly, the N2 fixation products by TiO2/Bi/CC effectively promote lettuce growth and enhance lettuce nutrient contents, which further validates the feasibility of this system in large-scale application of crop cultivation.

Boosted C-C coupling with Cu-Ag alloy sub-nanoclusters for CO2-to-C2H4 photosynthesis

The selective photocatalytic conversion of CO2 and H2O to high value-added C2H4 remains a great challenge, mainly attributed to the difficulties in C-C coupling of reaction intermediates and desorption of C2H4* intermediates from the catalyst surface. These two key issues can be simultaneously overcome by alloying Ag with Cu which gives enhanced activity to both reactions. Herein, we developed a facile stepwise photodeposition strategy to load Cu-Ag alloy sub-nanoclusters (ASNCs) on TiO2 for CO2 photoreduction to produce C2H4. The optimized catalyst exhibits a record-high C2H4 formation rate (1110.6 ± 82.5 μmol g-1 h-1) with selectivity of 49.1 ± 1.9%, which is an order-of-magnitude enhancement relative to current work for C2H4 photosynthesis. The in situ FT-IR spectra combined with DFT calculations reveal the synergistic effect of Cu and Ag in Cu-Ag ASNCs, which enable an excellent C-C coupling capability like Ag and promoted C2H4* desorption property like Cu, thus advancing the selective and efficient production of C2H4. The present work provides a deeper understanding on cluster chemistry and C-C coupling mechanism for CO2 reduction on ASNCs and develops a feasible strategy for photoreduction CO2 to C2 fuels or industrial feedstocks.

Synergistic Photoelectrochemical and Photocatalytic Properties of the Cobalt Nanoparticles-Embedded TiVO4 Thin Film

To optimize the semiconductor properties of TiVO4 thin films and enhance their performance, we incorporated cobalt nanoparticles as an effective co-catalyst consisting of a non-noble metal. Through an investigation into the impact of cobalt loading on spray pyrolyzed TiVO4 thin films, we observed a significant enhancement in the photoelectrochemical (PEC) performance. This was accomplished by carefully optimizing the concentrations of Co2+ (3 mM) to fabricate a composite electrode, resulting in a higher photocurrent density for the TiVO4:Co photoanode. When an applied potential of 1.23 V (vs RHE) was used, the photocurrent density reached 450 μA/cm2, approximately 5 times higher than that of bare TiVO4. We conducted a thorough characterization of the composite structure and optical properties. Additionally, electrochemical impedance spectroscopy analysis indicated that the TiVO4/Co thin film exhibited a smaller semicircle, indicating a significant improvement in charge transfer at the interface. In comparison to bare TiVO4, the TiVO4/Co composite exhibited a notable improvement in photocatalytic activity when degrading methylene blue (MB) dye, a widely employed model dye. Under light illumination, a TiVO4/Co thin film exhibited a notable dye degradation rate of 97% within a 45 min duration. The scalability of our fabrication method makes it suitable for large-area devices intended for sunlight-driven PEC seawater splitting studies.

Fabrication of Z-Type TiN@(A,R)TiO2 Plasmonic Photocatalyst with Enhanced Photocatalytic Activity

Plasmonic effect-enhanced Z-type heterojunction photocatalysts comprise a promising solution to the two fundamental problems of current TiO₂-based photocatalysis concerning low-charge carrier separation efficiency and low utilization of solar illumination. A plasmonic effect-enhanced TiN@anatase-TiO₂/rutile-TiO₂ Z-type heterojunction photocatalyst with the strong interface of the N-O chemical bond was synthesized by hydrothermal oxidation of TiN. The prepared photocatalyst shows desirable visible light absorption and good visible-light-photocatalytic activity. The enhancement in photocatalytic activities contribute to the plasma resonance effect of TiN, the N-O bond-connected charge transfer channel at the TiO₂/TiN heterointerface, and the synergistically Z-type charge transfer pathway between the anatase TiO₂ (A-TiO₂) and rutile TiO₂ (R-TiO₂). The optimization study shows that the catalyst with a weight ratio of A-TiO₂/R-TiO₂/TiN of approximately 15:1:1 achieved the best visible light photodegradation activity. This work demonstrates the effectiveness of fabricating plasmonic effect-enhanced Z-type heterostructure semiconductor photocatalysts with enhanced visible-light-photocatalytic activities.

The Role of the Ferroelectric Polarization in the Enhancement of the Photocatalytic Response of Copper-Doped Graphene Oxide-TiO2 Nanotubes through the Addition of Strontium

To evaluate the potential role of in situ formed Sr-Ti-O species as a ferroelectric component able to enhance the photocatalytic properties of an adjacent TiO₂ semiconductor, Cu-doped/graphene oxide (GO)/TiO₂ nanotubes (TiNTs) composites (with 0.5 wt % Cu and 1.0 wt % GO) have been synthesized while progressive amounts of strontium (up to 1.0 wt %) were incorporated at the surface of the composite through incipient wetness impregnation followed by post-thermal treatment at 400 °C. The different resulting photocatalytic systems were then first deeply characterized by means of N₂ adsorption-desorption measurements, X-ray diffraction (XRD), UV-vis diffuse reflectance (UV-vis DR), Raman and photoluminescence (PL) spectroscopies, and scanning electron microscopy (SEM) (with energy-dispersive X-ray (EDX) spectroscopy and Z-mapping). In a second step, optimization of the kinetic response of the Sr-containing composites was performed for the formic acid photodegradation under UV irradiation. The Sr-containing Cu/GO/TiNT composites were then fully characterized by electrochemical impedance spectroscopy (EIS) for their dielectric properties showing clearly the implication of polarization induced by the Sr addition onto the stabilization of photogenerated charges. Finally, a perfect correlation between the photocatalytic kinetic evaluation and dielectric properties undoubtedly emphasizes the role of ferroelectric polarization as a very valuable approach to enhance the photocatalytic properties in an adjacent semiconductor.

A review on hierarchical Bi2MoO6 nanostructures for photocatalysis applications

This overview provides comprehensive understanding and development trends of hierarchical Bi2MoO6 nanostructures as photocatalysts for efficient photocatalysis applications.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

Metal chalcogenide-based core/shell photocatalysts for solar hydrogen production: Recent advances, properties and technology challenges

Metal chalcogenides play a vital role in the conversion of solar energy into hydrogen fuel. Hydrogen fuel technology can possibly tackle the future energy crises by replacing carbon fuels such as petroleum, diesel and kerosene, owning to zero emission carbon-free gas and eco-friendliness. Metal chalcogenides are classified into narrow band gap (CdS, Cu₂S, Bi₂S_3, MoS_2, CdSe and MoSe₂) materials and wide band gap materials (ZnS, ZnSe and ZnTe). Composites of these materials are fabricated with different architectures in which core-shell is one of the unique composites that drastically improve the photo-excitons separation, where chalcogenides in the core can be well protected for sustainable uses. Thus,the core-shell structures promote the design and fabrication of composites with the required characteristics. Interestingly, the metal chalcogenides as a core-shell photocatalyst can be classified into type-I, reverse type-I, type-II and S-type nanocomposites, which can effectively influence and significantly enhance the rate of hydrogen production. In this direction, this review is undertaken to provide a comprehensive overview of the advanced preparation processes, properties of metal chalcogenides, and in particular, photocatalytic performance of the metal chalcogenides as a core-shell photocatalysts for solar hydrogen production.

Recent advances in photocatalytic decomposition of water and pollutants for sustainable application

Photoinduced reduction and oxidation, the important processes in photocatalytic water splitting and organic degradation, have generated increasing interest to address the energy and environmental issues. In this review, the recent developments in bandgap and interfacial engineering for enhanced light absorption, efficient charge separation and interfacial reaction are focused toward the applications in photocatalytic water splitting and organic degradation. In photoinduced reduction for hydrogen evolution, three major strategies are discussed: cocatalysts, sacrificial agents and heterojunctions. In photoinduced oxidation for organic degradation, three types of emerging pollutants of current concerns are highlighted: organic dyes, pharmaceuticals and volatile organic compounds. The key challenges of promising photocatalysts are discussed for future development and practical application.

Supercritically exfoliated Bi2Se3 nanosheets for enhanced photocatalytic hydrogen production by topological surface states over TiO2

Owing to the unique electronic properties of layered materials, topological insulators have interestingly grabbed much attention in the field of photocatalytic water splitting. Nowadays, 2D layered materials were composited with semiconductor photocatalysts, encourage much as it provides enormous active sites and also significantly prevent photogenerated charge recombination. Especially, Bi₂Se₃ possesses exceptional properties like topologically preserved conducting surface states with bulk insulating behavior and high surface area, which provides unconventional electron dynamics, resulting in facile electron transport and effective charge separation to photocatalyst. So far, several methods have been attempted to synthesize few-layered Bi₂Se₃ nanosheets from its bulk crystals. Here, a unique attempt is made and succeeded to exfoliate bulk Bi₂Se₃ to few layered nanosheets via surfactant free supercritical fluid processing using N-Methyl-2-pyrrolidone (NMP) as an exfoliating agent, with a short reaction time of 15 min. The exfoliation of Bi₂Se₃ crystal was confirmed by several characterization techniques, such as XRD, SEM, Raman, and HR-TEM. Furthermore, different weight percentages of exfoliated Bi₂Se₃ sheets/anatase TiO₂ nanoparticles were prepared and examined the photocatalytic activity using glycerol as a hole scavenger. Among them, 15 wt.% Bi₂Se₃ coupled TiO₂ nanocomposite showed enormous hydrogen evolution rate of 84.9 mmol h^-1g^-1_cat, which is 80 times higher than that of TiO₂ nanoparticles. In addition, the photostability of the nanocomposite was also verified, where it retains 94% of activity even after 4 cycles of continuous experiments. The improved rate of H₂ production was understood by theoretical calculations that topologically preserved conducting surface states of co-catalyst, Bi₂Se₃ nanosheets is supported to high mobile and scatter free electrons. It mediates the transport of electrons with TiO₂ nanoparticles that helped the effective charge separation. Thus, it proves a promising candidate for photocatalytic hydrogen production.

Photocatalytic hydrogen production by ternary heterojunction composites of silver nanoparticles doped FCNT-TiO2

Silver nanoparticles doped with FCNT-TiO₂ heterogeneous catalyst was prepared via one-step chemical reduction process and their efficacy was tested for hydrogen production under solar simulator. Crystallinity, purity, optical properties, and morphologies of the catalysts were examined by X-Ray diffraction, Raman spectroscopy, UV-Visible diffuse reflectance spectra, and Transmission Electron Microscopy. The chemical states and interface interactions were studied by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The optimized catalyst showed 19.2 mmol g^-1 h^-1 of hydrogen production, which is 28.5 and 7 times higher than the pristine TiO₂ nanoparticles and FCNT-TiO₂ nanocomposite, respectively. The optimized catalyst showed stability up to 50 h under the solar simulator irradiation. The natural solar light irradiated catalyst showed ~2.2 times higher hydrogen production rate than the solar simulator irradiation. A plausible reaction mechanism of Ag NPs/FCNT-TiO₂ photocatalyst was elucidated by investigating the beneficial co-catalytic role of Ag NPs and FCNTs for enhanced hydrogen production.

Optimization of N doping in TiO2 nanotubes for the enhanced solar light mediated photocatalytic H2 production and dye degradation

Herein, we report the optimization of nitrogen (N) doping in TiO₂ nanotubes to achieve the enhanced photocatalytic efficiencies in degradation of dye and H₂ gas evolution under solar light exposure. TiO₂ nanotubes have been produced via hydrothermal process and N doping has been tuned by varying the concentration of urea, being the source for N, by solid-state dispersion process. The structural analysis using XRD showed the characteristic occupancy of N into the structure of TiO₂ and the XPS studies showed the existence of Ti-N-Ti network in the N-doped TiO₂ nanotubes. The obtained TEM images showed the formation of 1D tube-like structure of TiO₂. Diffuse reflectance UV-Vis absorption spectra demonstrated that the N-doped TiO₂ nanotubes can efficiently absorb the photons of UV-Vis light of the solar light. The optimized N-doped TiO₂ nanotubes (TiO₂ nanotubes vs urea @ 1:1 ratio) showed the highest degradation efficiency over methyl orange dye (∼91% in 90 min) and showed the highest rate of H₂ evolution (∼19,848 μmol h^-1.g^-1) under solar light irradiation. Further, the recyclability studies indicated the excellent stability of the photocatalyst for the durable use in both the photocatalytic processes. The observed efficiency was ascribed to the optimized doping of N-atoms into the lattices of TiO₂, which enhanced the optical properties by forming new energy levels of N atoms near the valence band maximum of TiO₂, thereby increased the overall charge separation and recombination resistance in the system. The improved reusability of photocatalyst is attributed to the doping-induced structural stability in N-doped TiO₂. From the observed results, it has been recognized that the established strategy could be promising for synthesizing N-doped TiO₂ nanotubes with favorable structural, optical and photocatalytic properties towards dye degradation and hydrogen production applications.

3D Urchin-Like CuO Modified W18O49 Nanostructures for Promoted Photocatalytic Hydrogen Evolution under Visible Light Irradiation

Photocatalytic hydrogen evolution is a promising “green chemistry” route driven by sunlight for the direct water splitting into value-added hydrogen energy. Herein, with the object of exploring the effect of CuO loading on W₁₈O₄₉ photocatalytic activity, a 3D Urchin-like CuO modified W₁₈O₄₉ (CuO/W₁₈O₄₉) microspheres with different CuO loadings were synthesized via thermochemical precipitation combined with solvent-thermal method. The obtained CuO/W₁₈O₄₉ microspheres were analyzed by means of X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL), etc. The results infer that the urchin-like 3D morphology with a high surface area and abundant 1D nanowires promotes electron transfer, the introduction of CuO further increases the number of active sites, thereby ensuring fast interfacial charge transfer to improve photocatalytic performance. During photocatalytic H₂ evolution from water splitting, 5 wt.% CuO/W₁₈O₄₉ shows the optimal performance, the H₂ yield is almost 3.22 times that of the undoped counterparts. This work presents that oxygen-vacancy-rich heterojunction nanocomposites can be used as a new strategy to design materials with high photocatalytic activity.

Probing into the double identity of Cu in bimetallic CuAg-TNTA hot-electron devices for photo-hydrogen conversion

The dual identities of Cu are hot electron acceptor and electron generator in the bimetal/TiO2 hot-electron device.

Photocatalytic hydrogen production from dye contaminated water and electrochemical supercapacitors using carbon nanohorns and TiO2 nanoflower heterogeneous catalysts

In this research, efficient and novel catalysts based on hierarchical carbon nanohorns-titanium nanoflowers have been prepared by one-pot solvothermal process. Hydrogen generation from dye-contaminated water and dye degradation along with electrochemical supercapacitance performance have been investigated using the synthesized hierarchical catalyst to produce 4500 μmol g^-1 h^-1 of hydrogen from the photocatalytically generated aqueous methylene blue and methyl orange dyes, which were degraded up to 90% under natural solar light irradiation. These results offer a new path to generate hydrogen from the aqueous dyes. The catalysts electrode showed 164.6 F g^-1 supercapacitance at 5 mV s^-1 scan rate, which is nearly 1.3 and 1.65-times higher than that of pristine titanium nanoflower and carbon nanohorns electrodes, respectively. Such superior results were achieved due to good crystallinity, improved optical absorption strength, strong chemical composition between the two components, and hierarchical morphology as demonstrated from XRD, UV-DRS, TEM, XPS, and Raman spectral characterizations.

Current developments and future trends in photocatalytic glycerol valorization: process analysis

Challenges and opportunities in photocatalytic glycerol valorization to hydrogen and value-added liquid products: process analysis and parametric study.

Highly efficient solar light-driven photocatalytic hydrogen production over Cu/FCNTs-titania quantum dots-based heterostructures

The need for clean and eco-friendly energy sources has increased enormously over the years due to adverse impacts caused by the detrimental fossil fuel energy sources on the environment. This work reports the safest and most efficient route for hydrogen generation using solar light receptive functionalized carbon nanotubes-titania quantum dots (FCNT-TQDs) as photocatalysts under the influence of solar light irradiation. Predominantly, dual capability of CNT as co-catalyst and photo-sensitizer reduced the recombination rate of charge carriers, and facilitated the efficient light harvesting. The bulk production of hydrogen via water harvesting is considered, wherein photocatalyst synthesized was tuned by the optimum addition of copper to achieve higher production rate of hydrogen up to 54.4 mmol h^-1g^-1, nearly 25-folds higher than that of pristine TiO₂ quantum dots. Addition of copper has a crucial role in improving the rate of hydrogen generation. The ternary composite exhibited 5.4-times higher hydrogen production compared to FCNT-TQDs composite.

Sustainable hydrogen production for the greener environment by quantum dots-based efficient photocatalysts: A review

Nano-size photocatalysts exhibit multifunctional properties that opened the door for improved efficiency in energy, environment, and health care applications. Among the diversity of catalyst Quantum dots are a class of nanomaterials having a particle size between 2 and 10 nm, showing unique optoelectrical properties that are limited to some of the metal, metal oxide, metal chalcogenides, and carbon-based nanostructures. These unique characteristics arise from either pristine or binary/ternary composites where noble metal/metal oxide/metal chalcogenide/carbon quantum dots are anchored on the surface of semiconductor photocatalyst. It emphasized that properties, as well as performance of photocatalytic materials, are greatly influenced by the choice of synthesis methods and experimental conditions. Among the chemical methods, photo-deposition, precipitation, and chemical reduction, are the three most influential synthesis approaches. Further, two types of quantum dots namely metal based and carbon-based materials have been highlighted. Based on the optical, electrical and surface properties, quantum dots based photocatalysts have been divided into three categories namely (a) photocatalyst (b) co-catalyst and (c) photo-sensitizer. They showed enhanced photocatalytic performance for hydrogen production under visible/UV-visible light irradiation. Often, pristine metal chalcogenides as well as metal/metal oxide/carbon quantum dots attached to a semiconductor particle exhibit enhanced the photocatalytic activity for hydrogen production through absorption of visible light. Alternatively, noble metal quantum dots, which provide plenty of defects/active sites facilitate continuous hydrogen production. For instance, production of hydrogen in the presence of sacrificial agents using metal chalcogenides, metal oxides, and coinage metals based catalysts such as CdS/MoS₂ (99,000 μmol h^-1g^-1) TiO₂-Ni(OH)₂ (47,195 μmol h^-1g^-1) and Cu/Ag-TiO₂ nanotubes (56,167 μmol h^-1g^-1) have been reported. Among the carbon-based nanostructures, graphitic C₃N₄ and carbon quantum dots composites displayed enhanced hydrogen gas (116.1 μmol h^-1) production via overall water splitting. This review accounts recent findings on various chemical approaches used for quantum dots synthesis and their improved materials properties leading to enhanced hydrogen production particularly under visible light irradiation. Finally, the avenue to improve quantum efficiency further is proposed.

Hierarchical Ag/Bi2MoO6 hollow nanoboxes with high photocatalytic performance

Well-ordered hierarchical Ag/Bi₂MoO₆ hollow nanoboxes are obtained through an artful hydrothermal method. Ag₃PO₄ nanocubes serve as growth templates and precursor sources of Ag. Ag₃PO₄ is reduced to Ag nanoparticles, which are dispersed on the nanosheet-built hierarchical Bi₂MoO₆ nanoboxes. With the investigation of intermediate products, the growth process of Ag/Bi₂MoO₆ is studied. Due to the hierarchical hollow structure and the introduction of Ag, the Ag/Bi₂MoO₆ nanoboxes exhibit enhanced visible-light absorption and photocatalytic performance compared to the pristine Bi₂MoO₆ microboxes.

Wide spectrum photocatalytic activity in lanthanide-doped upconversion nanophosphors coated with porous TiO2 and Ag-Cu bimetallic nanoparticles

Approaches towards maximum utilization of solar light spectrum for photocatalysis have currently attracted great interest. The combination of profoundly different properties, such as, upconversion, semiconducting and plasmonic properties can produce a favorable path in efficient utilization of the different regions of solar light reaching to earth. In this regard, design and fabrication of microstructures consisting of upconverting lanthanide doped nanophosphors coated with porous semiconducting material, TiO₂ and decorated with plasmonic Ag-Cu bimetallic nanoparticles is presented in this work. These microstructures display great stability and exceptional photocatalytic activity by absorbing wide spectrum from ultraviolet to near infrared. The photocatalytic activity could be attributed to the synergistic effects between the different components and the efficient energy transfer between them. The development of such sort of hybrid microstructures could pave way for the development of new materials for the efficient utilization of the wide spectrum of sunlight.

Photocatalytic Decomposition of Gaseous HCHO over Ag Modified TiO₂ Nanosheets at Ambient Temperature

Ag nanoparticles loaded onto TiO₂ nanosheets with exposed {001} facets were synthesized by solvothermal hydrolysis and photoreduction deposition methods. The results suggested that Ag NPs were uniformly dispersed on the surface of anatase TiO₂ NSs with a metallic state. The Raman scattering and visible light absorption performances of Ag/TiO₂ NSs were enhanced by Ag NPs due to their surface plasmon resonance effect. Photocatalytic oxidation experiments for HCHO were carried out under visible light, and the enhanced photocatalytic activity of Ag/TiO₂ NSs can be attributed to the synergistic effects of the following factors: (1) the {001} facets, which possessed higher surface energy, showed higher photocatalytic activity; (2) the Ag NPs, the increased oxygen vacancies, and O₂ adsorption on {001} facets can trap photoelectrons, thus inhibiting the recombination of photoelectrons and holes; (3) the Ag NPs can extend the light response range of TiO₂ into visible light. The in situ FTIR results showed that higher mineralization efficiency of HCHO was achieved on Ag/TiO₂ NSs than on Ag/TiO₂ NPs. Additionally, the mechanism for HCHO photocatalytic oxidation was also discussed.

Visible light photocatalytic mineralization of 17α-ethinyl estradiol (EE2) and hydrogen evolution over silver and strontium modified TiO2 nanoparticles: mechanisms and phytotoxicity assessment

This study focusses on the novel synthesis of silver and strontium modified TiO₂ nanocomposite through a sol–gel method, which was then utilized for visible light degradation of EE2 and hydrogen production for the first time.

Porous TiO₂-Based Gas Sensors for Cyber Chemical Systems to Provide Security and Medical Diagnosis

Gas sensors play an important role in our life, providing control and security of technical processes, environment, transportation and healthcare. Consequently, the development of high performance gas sensor devices is the subject of intense research. TiO₂, with its excellent physical and chemical properties, is a very attractive material for the fabrication of chemical sensors. Meanwhile, the emerging technologies are focused on the fabrication of more flexible and smart systems for precise monitoring and diagnosis in real-time. The proposed cyber chemical systems in this paper are based on the integration of cyber elements with the chemical sensor devices. These systems may have a crucial effect on the environmental and industrial safety, control of carriage of dangerous goods and medicine. This review highlights the recent developments on fabrication of porous TiO₂-based chemical gas sensors for their application in cyber chemical system showing the convenience and feasibility of such a model to provide the security and to perform the diagnostics. The most of reports have demonstrated that the fabrication of doped, mixed and composite structures based on porous TiO₂ may drastically improve its sensing performance. In addition, each component has its unique effect on the sensing properties of material.