Environmentally benign benzyl alcohol oxidation and C-C coupling catalysed by amide functionalized 3D Co(II) and Zn(II) metal organic frameworks

Copper Accumulation Efficiency in Different Recombinant Microorganism Strains Available for Bioremediation of Heavy Metal-Polluted Waters

The aim of this research was to investigate the bioremediation conditions of copper in synthetic water. In the present study, copper ions accumulation efficiency was determined using various genetically modified strains of Saccharomyces cerevisiae (EBY100, INVSc1, BJ5465, and GRF18), Pichia pastoris (X-33, KM71H), Escherichia coli (XL10 Gold, DH5α, and six types of BL21 (DE3)), and Escherichia coli BL21 (DE3) OverExpress expressing two different peroxidases. Viability tests of yeast and bacterial strains showed that bacteria are viable at copper concentrations up to 2.5 mM and yeasts up to 10 mM. Optical emission spectrometry with inductively coupled plasma analysis showed that the tolerance of bacterial strains on media containing 1 mM copper was lower than the tolerance of yeast strains at the same copper concentration. The E. coli BL21 RIL strain had the best copper accumulation efficiency (4.79 mg/L of culture normalized at an optical density of 1.00), which was 1250 times more efficient than the control strain. The yeast strain S. cerevisiae BJ5465 was the most efficient in copper accumulation out of a total of six yeast strains used, accumulating over 400 times more than the negative control strain. In addition, E. coli cells that internally expressed recombinant peroxidase from Thermobifida fusca were able to accumulate 400-fold more copper than cells that produced periplasmic recombinant peroxidases.

Electrocatalytic Behavior of an Amide Functionalized Mn(II) Coordination Polymer on ORR, OER and HER

The new 3D coordination polymer (CP) [Mn(L)(HCOO)]n (Mn-CP) [L = 4-(pyridin-4-ylcarbamoyl)benzoate] was synthesised via a hydrothermal reaction using the pyridyl amide functionalized benzoic acid HL. It was characterized by elemental, FT-IR spectroscopy, single-crystal and powder X-ray diffraction (PXRD) analyses. Its structural features were disclosed by single-crystal X-ray diffraction analysis, which revealed a 3D structure with the monoclinic space group P21/c. Its performance as an electrocatalyst for oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER) reactions was tested in both acidic (0.5 M H2SO4) and alkaline (0.1 M KOH) media. A distinct reduction peak was observed at 0.53 V vs. RHE in 0.1 M KOH, which corresponds to the oxygen reduction, thus clearly demonstrating the material's activity for the ORR. Tafel analysis revealed a Tafel slope of 101 mV dec-1 with mixed kinetics of 2e- and 4e- pathways indicated by the Koutecky-Levich analysis. Conversely, the ORR peak was not present in 0.5 M H2SO4 indicating no activity of Mn-CP for this reaction in acidic media. In addition, Mn-CP demonstrated a noteworthy activity toward OER and HER in acidic media, in contrast to what was observed in 0.1 M KOH.

Experimental and computational investigation of a green Knoevenagel condensation catalyzed by zeolitic imidazolate framework-8

ZIF-8 is a highly porous, stable, and abundant surface area material that can be used as an environmentally friendly catalyst for Knoevenagel condensations. The effects of the ratio of the reactants (benzaldehyde (BA):ethyl cyanoacetate (ECA)), reaction temperature, and catalyst concentration were systematically investigated using a ZIF-8 catalyst and water as the solvent. ZIF-8 (3-5 wt%) showed excellent catalytic performance with an almost complete conversion of BA in less than 6 h with a BA:ECA molar ratio of 1:2 at different temperatures. At 60 °C, the BA conversion rate and product selectivity of the reaction reached their highest values after 4 h with a BA:ECA molar ratio of 1:1. When employing 5.0 wt% ZIF-8, almost complete BA conversion was achieved after 3 h at room temperature. ZIF-8 also demonstrated good recyclability with almost no change in its catalytic activity over five cycles. The proposed reaction mechanism is based on the catalytic activity of the basic N sites on the surface of ZIF-8, and is supported by density functional theory calculations. The present approach provides a promising strategy for the construction of simple and environmentally friendly ZIF-8 catalysts.

Designing and Construction of Polyaromatic Group Containing Cd(II)-based Coordination Polymers for Solvent-free Strecker-type Cyanation of Acetals

In the present work, we have synthesized and characterized two novel Cd(II) coordination polymers, [Cd4(L1)4(DMF)6]n.3n(DMF) (1) and [Cd2(L2)2(DMF)3]n.2n(DMF) (2), and studied their catalytic application. They were synthesized via solvothermal reaction...

Metal-Organic Frameworks as Versatile Heterogeneous Solid Catalysts for Henry Reactions

Metal–organic frameworks (MOFs) have become one of the versatile solid materials used for a wide range of applications, such as gas storage, gas separation, proton conductivity, sensors and catalysis. Among these fields, one of the more well-studied areas is the use of MOFs as heterogeneous catalysts for a broad range of organic reactions. In the present review, the employment of MOFs as solid catalysts for the Henry reaction is discussed, and the available literature data from the last decade are grouped. The review is organized with a brief introduction of the importance of Henry reactions and structural properties of MOFs that are suitable for catalysis. The second part of the review discusses the use of MOFs as solid catalysts for the Henry reaction involving metal nodes as active sites, while the third section provides data utilizing basic sites (primary amine, secondary amine, amides and urea-donating sites). While commenting on the catalytic results in these two sections, the advantage of MOFs over other solid catalysts is compared in terms of activity by providing turnover number (TON) values and the structural stability of MOFs during the course of the reaction. The final section provides our views on further directions in this field.

Oxidation of Organic Compounds with Peroxides Catalyzed by Polynuclear Metal Compounds

The review describes articles that provide data on the synthesis and study of the properties of catalysts for the oxidation of alkanes, olefins, and alcohols. These catalysts are polynuclear complexes of iron, copper, osmium, nickel, manganese, cobalt, vanadium. Such complexes for example are: [Fe2(HPTB)(m-OH)(NO3)2](NO3)2·CH3OH·2H2O, where HPTB-¼N,N,N0,N0-tetrakis(2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane; complex [(PhSiO1,5)6]2[CuO]4[NaO0.5]4[dppmO2]2, where dppm-1,1-bis(diphenylphosphino)methane; (2,3-η-1,4-diphenylbut-2-en-1,4-dione)undecacarbonyl triangulotriosmium; phenylsilsesquioxane [(PhSiO1.5)10(CoO)5(NaOH)]; bi- and tri-nuclear oxidovanadium(V) complexes [{VO(OEt)(EtOH)}2(L2)] and [{VO(OMe)(H2O)}3(L3)]·2H2O (L2 = bis(2-hydroxybenzylidene)terephthalohydrazide and L3 = tris(2-hydroxybenzylidene)benzene-1,3,5-tricarbohydrazide); [Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane). For comparison, articles are introduced describing catalysts for the oxidation of alkanes and alcohols with peroxides, which are simple metal salts or mononuclear metal complexes. In many cases, polynuclear complexes exhibit higher activity compared to mononuclear complexes and exhibit increased regioselectivity, for example, in the oxidation of linear alkanes. The review contains a description of some of the mechanisms of catalytic reactions. Additionally presented are articles comparing the rates of oxidation of solvents and substrates under oxidizing conditions for various catalyst structures, which allows researchers to conclude about the nature of the oxidizing species. This review is focused on recent works, as well as review articles and own original studies of the authors.

Cobalt-Based Metal Organic Frameworks as Solids Catalysts for Oxidation Reactions

Metal organic frameworks (MOFs) are porous crystalline solids whose frameworks are constituted by metal ions/nodes with rigid organic linkers leading to the formation of materials having high surface area and pore volume. One of the unique features of MOFs is the presence of coordinatively unsaturated metal sites in their crystalline lattice that can act as Lewis acid sites promoting organic transformations, including aerobic oxidation reactions of various substrates such as hydrocarbons, alcohols, and sulfides. This review article summarizes the existing Co-based MOFs for oxidation reactions organized according to the nature of substrates like hydrocarbon, alcohol, olefin, and water. Both aerobic conditions and peroxide oxidants are discussed. Emphasis is placed on comparing the advantages of using MOFs as solid catalysts with respect to homogeneous salts in terms of product selectivity and long-term stability. The final section provides our view on future developments in this field.

1D Zn(II) Coordination Polymers as Effective Heterogeneous Catalysts in Microwave-Assisted Single-Pot Deacetalization-Knoevenagel Tandem Reactions in Solvent-Free Conditions

The new 1D CPs [Zn(L1)(H2O)4]n.nH2O (1) and [Zn(L2)(H2O)2]n (2) [L1 = 1,1′-(ethane-1,2-diyl)bis(6-oxo-1,6-dihydropyridine-3-carboxylic acid); L2 = 1,1′-(propane-1,3-diyl)bis(6-oxo-1,6-dihydropyridine-3-carboxylic acid)] were prepared from flexible dicarboxylate pro-ligands (H2L1 and H2L2). Both CPs 1 and 2 were characterized by elemental, FTIR, and powder X-ray diffraction analysis. Their geometry and the structural features were unveiled by single-crystal X-ray diffraction analysis. The underlying topology of the CPs was illustrated by the topological analysis of the H-bonded structure of CP 1, which revealed a 3,4,6-connected trinodal net. On the other hand, topological analysis on the hydrogen-bonded network of CP 2 showed a 2,3,3,4,6,7-connected hexanodal net. The thermal stability of the CPs was investigated by thermogravimetric analysis. CPs 1 and 2 act as heterogeneous catalysts in one-pot tandem deacetalization–Knoevenagel condensation reactions under environmentally mild conditions. CPs 1 exhibits a yield of ca. 91% in a microwave-assisted solvent-free medium, whereas a slightly lower yield was obtained for CP 2 (87%) under the same experimental protocol. The recyclability of catalyst 1 was also assessed. To our knowledge, these are the first Zn(II)-based CPs to be applied as heterogeneous catalysts for the above tandem reactions under environmentally friendly conditions.

Versatility of Amide-Functionalized Co(II) and Ni(II) Coordination Polymers: From Thermochromic-Triggered Structural Transformations to Supercapacitors and Electrocatalysts for Water Splitting

The new 2D coordination polymers (CPs) [M(L)₂(H₂O)₂]_n [M = Co^II (1) and Ni^II (2); L = 4-(pyridin-3-ylcarbamoyl)benzoate] were synthesized from pyridyl amide-functionalized benzoic acid (HL). They were characterized by elemental, Fourier transform infrared, thermogravimetric, powder X-ray diffraction (PXRD), and single-crystal X-ray diffraction (XRD) structural analyses. Single-crystal XRD analysis revealed the presence of a 2D polymeric architecture, and topological analyses disclose a 2,4-connected binodal net. A thermochromic effect leads to the production of two new CPs, 1' and 2', by heating at ca. 220 °C, accompanied by a color change from orange to purple in the case of 1 and from blue to green in the case of 2. The transformation of 1 to 1' takes place through an intermediate (1a) with a different twist of the L^- ligand, leading to the formation of a 1D polymeric architecture, as proven by single-crystal XRD analysis. The addition of water or keeping 1' or 2' in air for several days leads to regeneration of 1 or 2, respectively. The thermochromic-triggered structural transformations of 1 and 2 were further substantiated by PXRD and UV-vis ground-state diffuse-reflectance absorption studies. The supercapacitance ability of the CPs 1 and 2 and a Ni-Co composite (made from mixing the CPs 1 and 2) was investigated by electroanalytical techniques, such as cyclic voltammetry and electrochemical impedance spectroscopy. The CP 2 exhibits the highest specific capacity of 273.8 C g^-1 at an applied current density of 1.5 A g^-1. These newly developed CPs further act as electrocatalysts for the water-splitting reaction.

A mechanistic insight into the rapid and selective removal of Congo Red by an amide functionalised Zn(ii) coordination polymer

New CPs [Zn(μ-1κOO':2κN-L)(H₂O)(BDC)_0.5]_n·n(DMF) (1), [Cd(μ-1κO:2κN-L)₂(H₂O)₂]_n (2), and [Pb(μ-1κOO':2κO'-L)(μ-1κO:2κO':3κN-L)]_n (3) [L = 4-(pyridin-3-ylcarbamoyl)benzoate; BDC = benzene-1,4-dicarboxylate] were synthesized and characterized by elemental, FT-IR, powder, and single-crystal X-ray diffraction analyses. Single crystal X-ray diffraction analysis discloses 1D polymeric architectures for 1 and 2 and a 2D one for 3. The topological analysis exemplifies a 2,2,3-connected 3-nodal net with the point symbol {8²·12}₂{8}₃ for 1, a 2,4-connected bimodal net for 2, and a 3,4,7-connected trinodal net for 3. CP 1 shows a selective removal of the Congo Red (CR) dye amongst various dyes. It can be recycled and reused without any significant loss of its dye removal efficiency. An insight into the selective removal of the Congo dye is provided by in silico studies, being accounted for by anion-π, cation-π, and π-π stacking interactions, involving the Zn(ii) ion, phenyl rings, and O_carboxylate of L, and the phenyl rings, naphthalene rings, and O_sulfonate of CR.

Guedes da Silva MF, Pombeiro AJL. Zn(II)-to-Cu(II) Transmetalation in an Amide Functionalized Complex and Catalytic Applications in Styrene Oxidation and Nitroaldol Coupling

The mononuclear zinc(II) complex cis-[ZnL2(H2O)2] (1; L = 4-(pyridin-3-ylcarbamoyl)benzoate) was synthesized and characterized. By soaking crystals of 1 in a mixture of DMF-H2O solution containing a slight excess of Cu(NO3)2 × 3H2O a transmetalation reaction occurred affording the related copper(II) complex trans-[CuL2(H2O)2] (2). The structures of the compounds were authenticated by single crystal X-ray diffraction revealing, apart from a change in the isomerism, an alteration in the relative orientation of the chelating carboxylate groups and of the pyridine moieties. H-bond interactions stabilize both geometries and expand them into two-dimensional (2D) networks. The transmetalation was confirmed by SEM-EDS analysis. Moreover, the thermodynamic feasibility of the transmetalation is demonstrated by density-functional theory (DFT) studies. The catalytic activities of 1 and 2 for the oxidation of styrene and for the nitroaldol (Henry) C-C coupling reaction were investigated. The copper(II) compound 2 acts as heterogeneous catalyst for the microwave-assisted oxidation of styrene with aqueous hydrogen peroxide, yielding selectively (>99%) benzaldehyde up to 66% of conversion and with a turnover frequency (TOF) of 132 h-1. The zinc(II) complex 1 is the most active catalyst (up to 87% yield) towards the nitroaldol (Henry) coupling reaction between benzaldehyde and nitro-methane or -ethane to afford the corresponding β-nitro alcohols. The reaction of benzaldehyde with nitroethane in the presence of 1 produced 2-nitro-1-phenylpropanol in the syn and the anti diastereoisomeric forms, with a considerable higher selectivity towards the former (66:34).

An in situ approach to functionalize metal–organic frameworks with tertiary aliphatic amino groups

Tertiary aliphatic amino modified UiO-67/66(Zr), IRMOF-n(Zn) and MIL-101(Fe) were synthesized by a facile and efficient one-pot strategy under the corresponding metal catalysis.