Synthesis of a novel molecularly imprinted organic–inorganic hybrid polymer for the selective isolation and determination of fluoroquinolones in tilapia

Computer-aided design of molecularly imprinted polymer reinforced by double hybrid monomers for selective purification of hydroxycamptothecin

A kind of hydroxycamptothecin (HCPT) hybrid molecularly imprinted polymer (AT/MA-HMIPs) with high selectivity and hard silicon skeleton was successfully prepared based on double hybrid monomers. The relationship between templates and functional monomers was studied through computer molecular simulation and experiments. Three single-monomer molecularly imprinted polymers were prepared as controls. The Langmuir isotherm and pseudo-second-order kinetic models were found to fit well with the adsorption results. The maximum adsorption capacity was 18.79 mg/g, and equilibrium was reached within 20 min. Moreover, it shows excellent selectivity (imprinting factor is 10.73) and good recoverability (after 10 adsorption-desorption cycles, the adsorption capacity only decreases by 7.75%) for HCPT. The purity of HCPT can reach 80.86% after being put into a solid phase extraction column and used in an actual sample, and the yield was 61.43%. This study lays the fundament for the development of excellent HCPT molecularly imprinted composites.

Development of a New Solid-Phase Extraction Base Method for Free Saccharide Content Estimation of Meningococcal Conjugate Vaccines

GlaxoSmithKline (GSK) is currently developing a fully liquid presentation to ease the administration of the licensed quadrivalent conjugate vaccine (Menveo) against meningococcal serogroup A, C, W, and Y (MenACWY) infections. Herein, we report a new method for determining the free saccharide (FS) content of CRM₁₉₇-MenACWY conjugated antigens, with the aim of improving accuracy and reproducibility. Mathematical models have been used to support technical knowledge in reducing the need for experimental development. This results in an improved, faster, and platform-based technique for FS separation with one single pretreatment applicable to all antigens of the multivalent meningococcal vaccine.

Determination of fluoroquinolones in chicken muscle by molecularly imprinted graphitic carbon nitride-based solid-phase extraction and ultra-performance liquid chromatography

A graphitic carbon nitride was synthesised and nalidixic acid (NA) based molecularly imprinted microspheres (MIMs) were polymerised on its surface to create a composite material. After characterisation and evaluation of its absorption ability, the composite was used to prepare a solid-phase extraction (SPE) cartridge for purification of fluoroquinolones in chicken muscle, analysed by ultra-performance liquid chromatography. The cartridge showed high absorption capacities (378-559 μg) and high recoveries (92.1-99.4%) for eight fluoroquinolones, and could be reused at least 20 times. The limits of detection for the 8 drugs were 0.2-0.8 ng g^-1, and recoveries from standard fortified blank chicken muscle samples were 71.9-96.8%. This is the first study reporting the use of molecularly imprinted graphitic carbon nitride composite to determine the residue of veterinary drug in foods of animal origin.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Synthesis of molecularly imprinted polymers for extraction of fluoroquinolones in environmental, food and biological samples

In recent years, fluoroquinolones have been found present in important water resources and food sources which compromises the food quality and availability, thereby, causing risks to the consumer. Despite the recent advancement in the development of analytical instrumentation for routine monitoring of fluoroquinolones in water, food, and biological samples, sample pre-treatment is still a major bottleneck of the analytical methods. Therefore, fast, selective, sensitive, and cost-effective sample preparation methods prior to instrumental analysis for fluoroquinolones residues in environmental, food and biological samples are increasingly important. Solid-phase extraction using different adsorbents is one of the most widely used pre-concentration/clean-up techniques for analysis of fluoroquinolones. Molecularly imprinted polymers (MIPs) serve as excellent effective adsorbent materials for selective extraction, separation, clean-up and preconcentration of various pollutants in different complex matrices. Therefore, synthesis of MIPs remains crucial for their applications in sample preparation as this offers much-needed selectivity in the extraction of compounds in complex samples. In this study, the progress made in the synthesis of MIPs for fluoroquinolones and their applications in water, food and biological samples were reviewed. The present review discusses the selection of all the elements of molecular imprinting for fluoroquinolones, polymerization processes and molecular recognition mechanisms. In conclusion, the related challenges and gaps are given to offer ideas for future research focussing on MIPs for fluoroquinolones.

Fabrication of Water-Compatible Molecularly Imprinted Resin in a Hydrophilic Deep Eutectic Solvent for the Determination and Purification of Quinolones in Wastewaters

A novel water-compatible molecularly imprinted resin was prepared in a green solvent deep eutectic solvent (DES). Resorcinol and melamine, as functional monomers with an abundant hydrophilic group, such as –OH, –NH₂ and –NH–, were introduced into the molecularly imprinted resin (MIR). Three DESs (choline chloride-ethylene glycol, tetramethylammonium bromide-ethylene glycol and tetramethylammonium chloride-ethylene glycol) were used to synthesize the molecularly imprinted resin and the resulting deep eutectic solvent-based molecularly imprinted resins were characterized by particle size analysis, elemental analysis, scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The resulting deep eutectic solvent-based molecularly imprinted resins were then applied to the adsorption of quinolones (ofloxacin) in water. The adsorption process of deep eutectic solvent-based molecularly imprinted resin followed the static adsorption model, Langmuir isotherm (R² ≥ 0.9618) and kinetic model pseudo-second-order (R² > 0.9814). The highest theory adsorption ability of the three kinds of deep eutectic solvent-based molecularly imprinted resins was more than 23.79 mg/g. The choline chloride-ethylene glycol-based MIR was applied to solid-phase extraction for the determination and purification of quinolones (e.g., ciprofloxacin and ofloxacin). The detection limit of deep eutectic solvent-based molecularly imprinted resin-solid-phase extraction method was less than 0.018 mg/L. The recoveries of the deep eutectic solvent-based molecularly imprinted resin-solid-phase extraction method at three spiked levels were 88.7–94.5%, with a relative standard deviation of ≤4.8%. The novel deep eutectic solvent-based molecularly imprinted resin-solid-phase extraction method is a simple, selective and accurate pre-treatment method and can be used to determine the quinolones in environmental water.

Novel coordination imprinted polymer monolithic column applied to the solid-phase extraction of flumequine from fish samples

In this study, a coordination imprinted polymer (CIP) solid-phase extraction (SPE) method was developed to determine the residues of flumequine (FLU) in fish samples. Silanized graphene oxide-doped CIP (SGO-CIP) monolithic column was prepared using FLU-Zn²⁺ as template in the presence of SGO. The synthesis conditions of SGO-CIP column were optimized by the response surface methodology. Under the optimum conditions, this column showed high specificity to FLU, and the adsorption capacity reached 61.74 ng mg^-1. The enrichment factor of the monolithic column was over 40-fold. Various factors affecting the extraction efficiency of SGO-CIP column during SPE were tested to achieve optimal enrichment and to reduce non-specific adsorption. FLU in fish was detected by using a high-performance liquid chromatography-fluorescence detection system. The detection limit was as low as 0.32 ng g^-1 and the recovery was as high as 95.2%, with relative standard deviations of below 5.9%. This simple and sensitive method may be applicable to the determination of FLU residues in foods.

Preparation of a surface-grafted imprinted ceramic membrane for selective separation of molybdate anion from water solutions

A surface-grafted imprinted ceramic membrane (IIP-PVI/CM) for recognizing molybdate (Mo(VI)) anion was prepared by surface-initiated graft-polymerization. Firstly, raw alumina ceramic membrane (CM) was deposited with SiO₂ active layer by situ hydrolysis deposition method. Subsequently, γ-methacryloxy propyl trimethoxyl silane (MPS) was used as a coupling agent to introduce double bonds onto the SiO₂ layer (MPS-CM). Then, 1-vinylimidazole (VI) was employed as a functional monomer to graft-polymerization onto the MPS-CM (PVI-CM). During the graft-polymerization, the influence factors of grafting degree of PVI were investigated in detail. Under optimum conditions (monomer concentration 20wt%, temperature 70°C, initiator amount 1.1wt% and reaction time 8h), the grafting degree of 20.39g/100g was obtained. Further, Mo(VI) anion was used as a template to imprint in the PVI-CM by employing 1,6-dibromohexane as a cross-linking agent, and then Mo(VI) was removed, obtaining the IIP-PVI/CM with many imprinted cavities for Mo(VI). Thereafter, static adsorption and dynamic separation properties of IIP-PVI/CM for Mo(VI) were studied. Results indicate that IIP-PVI/CM shows a specific selectivity for Mo(VI) with the adsorption capacity of 0.69mmol/100g, and the selectivity coefficient of IIP-PVI/CM is 7.48 for molybdate to tungstate anions. During the dynamic separation, IIP-PVI/CM has also good selectivity for separation of Mo(VI) and W(VI) anions.

Determination of ciprofloxacin in Jiaozhou Bay using molecularly imprinted solid-phase extraction followed by high-performance liquid chromatography with fluorescence detection

A high selective pre-treatment method for the cleanup and preconcentration of ciprofloxacin in natural seawater samples was developed based on molecularly imprinted solid-phase extraction (MISPE). The ciprofloxacin imprinted polymers were synthesized and the characteristics of obtained polymers were evaluated by scanning electron microscopy, Fourier transform infrared spectroscopy and binding experiments. The imprinted materials showed high adsorption ability for ciprofloxacin and were applied as special solid-phase extraction sorbents for selective separation of ciprofloxacin. An off-line MISPE procedure was optimized and the developed MISPE method allowed direct purification and enrichment of the ciprofloxacin from the aqueous samples prior to high-performance liquid chromatography analysis. The recoveries of spiked seawater on the MISPE cartridges ranged from 75.2 to 112.4% and the relative standard deviations were less than 4.46%. Five seawater samples from Jiaozhou Bay were analyzed and ciprofloxacin was detected in two samples with the concentrations of 0.24 and 0.38μgL(-1), respectively.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.