Molecularly imprinted polymers for bioanalytical sample preparation

Developments and Applications of Molecularly Imprinted Polymer-Based In-Tube Solid Phase Microextraction Technique for Efficient Sample Preparation

Despite advancements in the sensitivity and performance of analytical instruments, sample preparation remains a bottleneck in the analytical process. Currently, solid-phase extraction is more widely used than traditional organic solvent extraction due to its ease of use and lower solvent requirements. Moreover, various microextraction techniques such as micro solid-phase extraction, dispersive micro solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, liquid-phase microextraction, and magnetic bead extraction have been developed to minimize sample size, reduce solvent usage, and enable automation. Among these, in-tube solid-phase microextraction (IT-SPME) using capillaries as extraction devices has gained attention as an advanced "green extraction technique" that combines miniaturization, on-line automation, and reduced solvent consumption. Capillary tubes in IT-SPME are categorized into configurations: inner-wall-coated, particle-packed, fiber-packed, and rod monolith, operating either in a draw/eject system or a flow-through system. Additionally, the developments of novel adsorbents such as monoliths, ionic liquids, restricted-access materials, molecularly imprinted polymers (MIPs), graphene, carbon nanotubes, inorganic nanoparticles, and organometallic frameworks have improved extraction efficiency and selectivity. MIPs, in particular, are stable, custom-made polymers with molecular recognition capabilities formed during synthesis, making them exceptional "smart adsorbents" for selective sample preparation. The MIP fabrication process involves three main stages: pre-arrangement for recognition capability, polymerization, and template removal. After forming the template-monomer complex, polymerization creates a polymer network where the template molecules are anchored, and the final step involves removing the template to produce an MIP with cavities complementary to the template molecules. This review is the first paper to focus on advanced MIP-based IT-SPME, which integrates the selectivity of MIPs into efficient IT-SPME, and summarizes its recent developments and applications.

Advances in Bioreceptor Layer Engineering in Nanomaterial-based Sensing of Pseudomonas Aeruginosa and its Metabolites

Pseudomonas aeruginosa is a pathogen that infects wounds and burns and causes severe infections in immunocompromised humans. The high virulence, the rise of antibiotic-resistant strains, and the easy transmissibility of P. aeruginosa necessitate its fast detection and control. The gold standard for detecting P. aeruginosa, the plate culture method, though reliable, takes several days to complete. Therefore, developing accurate, rapid, and easy-to-use diagnostic tools for P. aeruginosa is highly desirable. Nanomaterial-based biosensors are at the forefront of detecting P. aeruginosa and its secondary metabolites. This review summarises the biorecognition elements, biomarkers, immobilisation strategies, and current state-of-the-art biosensors for P. aeruginosa. The review highlights the underlying principles of bioreceptor layer engineering and the design of optical, electrochemical, mass-based, and thermal biosensors based on nanomaterials. The advantages and disadvantages of these biosensors and their future point-of-care applications are also discussed. This review outlines significant advancements in biosensors and sensors for detecting P. aeruginosa and its metabolites. Research efforts have identified biorecognition elements specific and selective towards P. aeruginosa. The stability, ease of preparation, cost-effectiveness, and integration of these biorecognition elements onto transducers are pivotal for their application in biosensors and sensors. At the same time, when developing sensors for clinically significant analytes such as P. aeruginosa, virulence factors need to be addressed, such as the sensor's sensitivity, reliability, and response time in samples obtained from patients. The point-of-care applicability of the developed sensor may be an added advantage since it enables onsite determination. In this context, optical methods developed for P. aeruginosa offer promising potential.

Fabrication of a surface molecularly imprinted polymer membrane based on a single template and its application in the separation and extraction of phenytoin, phenobarbital and lamotrigine

An innovative molecularly imprinted polymer membrane (MIPM) was prepared with polyvinylidene difluoride (PVDF) as the support, phenytoin (PHT) as the single template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linking reagent, azobisisobutyronitrile as the initiator, and acetonitrile-dimethylformamide (1 : 1.5, v/v) as the porogen. These materials were characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurements and X-ray photoelectron spectroscopy. Their adsorption performances were evaluated through a series of experiments including isothermal adsorption, kinetic adsorption, selective adsorption, adsorption-desorption, reusability, and preparation reproducibility. Additionally, the application was explored by investigating the extraction recovery of MIPMs towards PHT, phenobarbital (PHB) and lamotrigine (LTG) in different matrices including methanol, normal saline (NS), phosphate buffer solution (PBS) and plasma. The results showed that MIPMs with rough and porous surfaces were successfully constructed, which offered good preparation reproducibility, reusability and selectivity. The adsorption capacities of MIPMs towards PHT, PHB and LTG were 2.312, 2.485 and 2.303 mg g-1, respectively, while their corresponding imprinting factors were 8.538, 12.122 and 4.562, respectively. The adsorption equilibrium of MIPMs was achieved within 20 min at room temperature without stirring or ultrasonication. The extraction recoveries of MIPMs for PHT, PHB or LTG in methanol, NS and PBS were more than 80% with an RSD% value of less than 3.64. In the case of plasma, the extraction recovery of MIPMs for PHT and PHB was more than 80% with an RSD% value of less than 2.41, while that of MIPMs for LTG was more than 65% with an RSD% value of less than 0.99. All the results indicated that the preparation method for MIPMs was simple, stable, and reliable, and the prepared MIPMs possessed excellent properties to meet the extraction application of PHT, PHB and LTG in different matrices.

Recent Developments in the Detection of Organic Contaminants Using Molecularly Imprinted Polymers Combined with Various Analytical Techniques

Molecularly imprinted polymers (MIPs) encompass a diverse array of polymeric matrices that exhibit the unique capacity to selectively identify a designated template molecule through specific chemical moieties. Thanks to their pivotal attributes, including exceptional selectivity, extended shelf stability, and other distinct characteristics, this class of compounds has garnered interest in the development of highly responsive sensor systems. As a result, the incorporation of MIPs in crafting distinctive sensors and analytical procedures tailored for specific analytes across various domains has increasingly become a common practice within contemporary analytical chemistry. Furthermore, the range of polymers amenable to MIP formulation significantly influences the potential utilization of both conventional and innovative analytical methodologies. This versatility expands the array of possibilities in which MIP-based sensing can be employed in recognition systems. The following review summarizes the notable progress achieved within the preceding seven-year period in employing MIP-based sensing techniques for analyte determination.

Molecular imprinted based microcryogels for thrombin purification

In addition to understanding and explaining the functions of proteins, the need for low-cost, easy and efficient purification methods has been increasing in the field of protein purification, which is also important for enzyme production. In this context, an alternative approach has been developed for the purification of thrombin, which has a crucial role in the hemostatic process, via thrombin imprinted microcryogels that allow reuse and have high selectivity. The characterization studies of the microcryogels were accomplished with micro-computed tomography (µCT), scanning electron microscopy (SEM), optical microscope, surface area measurements (BET analyses) and swelling test measurements. By scanning various parameters affecting thrombin adsorption, the maximum thrombin adsorption capacity (Qmax) was found to be 55.86 mg/g. Also, the selectivity of microcryogels was investigated with the competitive agents and reusability studies were performed. The purity of thrombin was evaluated by Fast Performance Liquid Chromatography (FPLC) method. Experimental results indicated that adsorption of thrombin by the developed microcryogels fit the Langmuir isotherm model (Qmax: 55.86 mg/g, R2: 0.9505) and pseudo-second order for three different thrombin concentrations (R2: 0.9978, R2: 0.9998, R2: 0.9999).

Modern automated microextraction procedures for bioanalytical, environmental, and food analyses

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.

Recent molecularly imprinted polymers applications in bioanalysis

Molecular imprinted polymers (MIPs) as extraordinary compounds with unique features have presented a wide range of applications and benefits to researchers. In particular when used as a sorbent in sample preparation methods for the analysis of biological samples and complex matrices. Its application in the extraction of medicinal species has attracted much attention and a growing interest. This review focus on articles and research that deals with the application of MIPs in the analysis of components such as biomarkers, drugs, hormones, blockers and inhibitors, especially in biological matrices. The studies based on MIP applications in bioanalysis and the deployment of MIPs in high-throughput settings and optimization of extraction methods are presented. A review of more than 200 articles and research works clearly shows that the superiority of MIP techniques lies in high accuracy, reproducibility, sensitivity, speed and cost effectiveness which make them suitable for clinical usage. Furthermore, this review present MIP-based extraction techniques and MIP-biosensors which are categorized on their classes based on common properties of target components. Extraction methods, studied sample matrices, target analytes, analytical techniques and their results for each study are described. Investigations indicate satisfactory results using MIP-based bioanalysis. According to the increasing number of studies on method development over the last decade, the use of MIPs in bioanalysis is growing and will further expand the scope of MIP applications for less studied samples and analytes.

Picomolar or beyond Limit of Detection Using Molecularly Imprinted Polymer-Based Electrochemical Sensors: A Review

Over the last decades, molecularly imprinted polymers (MIPs) have emerged as selective synthetic receptors that have a selective binding site for specific analytes/target molecules. MIPs are synthetic analogues to the natural biological antigen-antibody system. Owing to the advantages they exhibit, such as high stability, simple synthetic procedure, and cost-effectiveness, MIPs have been widely used as receptors/sensors for the detection and monitoring of a variety of analytes. Moreover, integrating electrochemical sensors with MIPs offers a promising approach and demonstrates greater potential over traditional MIPs. In this review, we have compiled the methods and techniques for the production of MIP-based electrochemical sensors along with the applications of reported MIP sensors for a variety of analytes. A comprehensive in-depth analysis of recent trends reported on picomolar (pM/10^-12 M)) and beyond picomolar concentration LOD (≥pM) achieved using MIPs sensors is reported. Finally, we discuss the challenges faced and put forward future perspectives along with our conclusion.

Molecular imprinted polymer combined with aptamer (MIP-aptamer) as a hybrid dual recognition element for bio(chemical) sensing applications. Review

The development of diagnostic devices based on memetic molecular recognitions are becoming highly promising due to high specificity, sensitivity, stability, and low-cost comparing to natural molecular recognition. During the last decade, molecular imprinted polymers (MIPs) and aptamer have shown dramatic enhancement in the molecular recognition characteristics for bio(chemical) sensing applications. Recently, MIP-aptamer, as an emerging hybrid recognition element, merged the advantages of the both recognition components. This dual recognition-based sensor has shown improved properties and desirable features, such as high sensitivity, low limit of detection, high stability under harsh environmental conditions, high binding affinity, and superior selectivity. Hybrid MIP-aptamer as dual recognition element, was used in the real sample analysis, such as detection of proteins, neurotransmitters, environmental pollutants, biogenic compounds, small ions, explosives, virus detections and pharmaceuticals. This review focuses on a comprehensive overview of the preparation strategies of various MIP-aptamer recognition elements, mechanism of formation of MIP-aptamer, and detection of various target molecules in different matrices.

The promise of graphene-based transistors for democratizing multiomics studies

As biological research has synthesized genomics, proteomics, metabolomics, and transcriptomics into systems biology, a new multiomics approach to biological research has emerged. Today, multiomics studies are challenging and expensive. An experimental platform that could unify the multiple omics approaches to measurement could increase access to multiomics data by enabling more individual labs to successfully attempt multiomics studies. Field effect biosensing based on graphene transistors have gained significant attention as a potential unifying technology for such multiomics studies. This review article highlights the outstanding performance characteristics that makes graphene field effect transistor an attractive sensing platform for a wide variety of analytes important to system biology. In addition to many studies demonstrating the biosensing capabilities of graphene field effect transistors, they are uniquely suited to address the challenges of multiomics studies by providing an integrative multiplex platform for large scale manufacturing using the well-established processes of semiconductor industry. Furthermore, the resulting digital data is readily analyzable by machine learning to derive actionable biological insight to address the challenge of data compatibility for multiomics studies. A critical stage of systems biology will be democratizing multiomics study, and the graphene field effect transistor is uniquely positioned to serve as an accessible multiomics platform.

Study on the preparation of molecular imprinted polymer for analysis of N-phenylglycine in human urine

N-phenylglycine (NPG) in human urine could be an important biomarker for predicting cancers, but its detection has difficulty due to its low abundance in urine. Herein, we report a molecular imprinted polymer (MIP) method to efficiently recognize NPG in urine. The MIP was prepared by precipitation polymerization, adopting NPG as the template, acrylamide (AM) as functional monomer, trimethylpropane triacrylate (TRIM) as crosslinking agent, and acetonitrile as porogen. The specificity and selectivity of MIP towards NPG in human urine were determined by comparing MIP's adsorption to the NPG and N-crotonylglycine (NTG) under the same conditions. The result β = Q_MIP-NPG/Q_MIP-NTG = 4.7 indicated the satisfactory specificity and selectivity. Parameters affecting the extraction efficiency were further optimized. Under the optimum conditions, the linear range, limit of detection, and limit of quantification of NPG were 0.5-100 mg∙L^-1, 1.6 × 10^-2 mg∙L^-1, and 5.5 × 10^-2 mg∙L^-1, respectively. Recoveries of NPG in human urine were in the range of 84.7-100.0% with RSD_S of 3.8-10.8%. The developed method demonstrated superior selectivity to the target analyte, which can be applied to separate and enrich the NPG from urine samples.

Molecularly imprinted polymers as a selective sorbent for forensic applications in biological samples-a review

Molecularly imprinted polymers (MIP) consist of a molecular recognition technology with applicability in different areas, including forensic chemistry. Among the forensic applications, the use of MIP in biological fluid analysis has gained prominence. Biological fluids are complex samples that generally require a pre-treatment to eliminate interfering agents to improve the results of the analyses. In this review, we address the development of this molecular imprinting technology over the years, highlighting the forensic applications of molecularly imprinted polymers in biological sample preparation for analysis of stimulant drugs such as cocaine, amphetamines, and nicotine.

Thin film molecularly imprinted polymer (TF-MIP), a selective and single-use extraction device for high-throughput analysis of biological samples

Enhancing selectivity, reducing matrix effects and increasing analytical throughput have been the main objectives in the development of biological sample preparation techniques. A thin film molecularly imprinted polymer (MIP) is employed for extraction and analysis of tricyclic antidepressants (TCAs) as a model class of compounds in human plasma for the first time to reach the abovementioned goals. The thin film MIPs prepared on a metal substrate can be used directly for extraction from biological matrices with no sample manipulation steps and no pre-conditioning. This method was validated with good linearity (R² > 0.99 in 1.0-500.0 ng mL^-1 range), excellent accuracy (90% -110%) and precision (RSD % value less than 15%) in pooled human plasma samples (N = 3). The limits of quantitation (LOQ) for TCAs in plasma samples were between 1.0-5.0 ng mL^-1 which are lower than the therapeutic ranges of these drugs. Kinetic and isotherm studies showed the superior performance of MIP sorbent compared to a non-imprinted polymer (NIP) sorbent in extracting TCAs from a bovine serum albumin (BSA) solution. The optimized and validated method for pooled human plasma was utilized for monitoring the concentration of TCAs in three patient samples who had been prescribed TCAs. These selective single-use thin film extraction devices are promising for efficient and fast procedures for analyzing biological samples.

Smokeless tobacco analysis: Simultaneous extraction and purification of alkaloids, volatile N-nitrosamines, and polycyclic hydrocarbons for GC-MS/MS

Several smokeless tobacco products are available in the market and comprise complex chemical matrices. Sample preparation for analysis of the multiple classes of harmful compounds in smokeless tobacco products is highly cumbersome. In this study, a simultaneous extraction scheme was developed for three toxic analyte classes in smokeless tobacco products using a two-phase solution consisting of 5% aqueous NaOH and dichloromethane in a 1:4 ratio. The dichloromethane extract was used to analyze four alkaloids directly at levels greater than parts per million; however, passing the layer through a silica cartridge for further purification and concentration was necessary for determining 18 polycyclic aromatic hydrocarbons and four volatile N-nitrosoamines at the ppt level. The multitargets were determined by using gas chromatography with tandem mass spectrometry. The limits of detection for the 18 polycyclic aromatic hydrocarbons, four volatile N-nitrosoamines, three minor alkaloids, and nicotine were 0.2-1.2, 0.2-0.4, 0.6-1.0, and 10.2 μg/g, respectively. Four different smokeless tobacco substrates were fortified with three levels of mixed standards, and the recoveries ranged between 83 and 110%. The method was highly efficient, reduced the sample amounts, solvents, and the time required by approximately 60%. The method was used to assay 18 smokeless tobacco products, and showed potentials in assaying drugs and other plant-based substrates.

Retention and molecular-recognition mechanisms of molecularly imprinted polymers for warfarin derivatives and their application for the determination of warfarin in human serum

Monodisperse molecularly imprinted polymers (MIPs) for warfarin (WF), 4'-chlorowarfarin (CWF), 4'-bromowarfarin (BWF), 4'-nitrowarfarin (NWF) and 4'-methylwarfarin (MWF) (MIP_WF, MIP_CWF, MIP_BWF, MIP_NWF and MIP_MWF, respectively) were prepared using 4-vinylpyridine (4-VPY) and ethylene glycol dimethacrylate as a functional monomer and crosslinker, respectively, by multi-step swelling and polymerization. The retention and molecular-recognition properties of those MIPs were evaluated in HILIC, and reversed- and normal-phase modes. According to ¹H NMR studies, one-to-three complex formation of one WF or CWF molecule with three 4-VPY molecules occurred. Via computational approaches, the intermolecular interaction modes and energies between WF derivatives and 4-VPYs were evaluated by semi-empirical quantum chemistry methods and density functional theory calculations. Three major possible hydrogen bonding interaction modes were identified: the interactions between the 4-hydroxy group, α-proton (methylene C-H) and α-proton (methyl C-H) of the WF derivative and the nitrogen atoms of 4-VPYs. In HILIC and normal-phase modes, the interaction energies showed satisfactory correlations with the retention factors of the WF derivatives. In reversed-phase mode, the retention factors of the WF derivatives were described by the hydrophobicity and the acidity of the 4-hydroxy groups of the WF derivatives. These results demonstrate that three hydrogen bonding interactions in HILIC and normal-phase modes, and hydrogen bonding or ionic interactions and hydrophobic interactions in reversed-phase mode play important roles in the retention and molecular-recognition of the WF derivatives on MIPs. Furthermore, MIP_BWF was successfully applied to the determination of WF in human serum by column-switching LC with high accuracy, precision and selectivity and without template-leakage problems.

Highly selective enrichment and direct determination of imazethapyr residues from milk using magnetic solid-phase extraction based on restricted-access molecularly imprinted polymers

Restricted access media magnetic molecularly imprinted polymers (RAM-MMIPs) were prepared as magnetic solid phase extraction (M-SPE) material by reversible addition fragmentation chain transfer (RAFT) technique. The resulting RAM-MMIPs had a uniform, imprinted, hydrophilic layer (63 nm), good binding capacity (34.85 mg g-1) and satisfactory selectivity. In addition, these RAM-MMIPs had a robust ability to eliminate the interference of protein macromolecules. These RAM-MMIPs were then coupled with HPLC/UV to identify imazethapyr (IM) residues in untreated milk samples. Several major factors would affect M-SPE extraction efficiency, such as the amount of RAM-MMIPs, pH, extraction time of the sample solution, and the volume ratio of the elution solvent. Under the optimal conditions, the developed method had good linearity (R2 > 0.9993), low detection limit (2.13 μg L-1), and low quantitative limit (7.15 μg L-1). These results indicated this proposed approach is an efficient method for direct enrichment and detection of IM herbicides in milk and other biological samples.

Polymer Composition Primarily Determines the Protein Recognition Characteristics of Molecularly Imprinted Hydrogels

Synthetic hydrogels with the ability to recognize and bind target proteins are useful for a number of applications, including biosensing and therapeutic agent delivery. One popular method for fabricating recognitive hydrogels is molecular imprinting. A long-standing hypothesis of the field is that these molecularly imprinted polymers (MIPs) retain the chemical and geometric profile of their protein template, resulting in subsequent ability to recognize the template in solution. Here, we systematically determined the influence of network composition, as well as the identity, amount, and extraction of imprinting templates, on the protein binding of MIPs. Network composition (i.e. the relative number of ionizable and hydrophobic groups) explained the extent of protein adsorption in all cases. The identity and amount of imprinting template, albeit a protein or synthetic polymer (PEG) of similar molecular weight, did not significantly influence the amount of protein bound. While the purification method influenced the extent of template adsorption, it did so by chemically modifying the network (acrylamide hydrolysis, increasing the acid content by up to 21%) and not by voiding occupied MIP pores. Therefore, our results indicate that material composition determines the extent to which MIPs bind template and non-template proteins.

A Novel Method for Extraction of Galegine by Molecularly Imprinted Polymer (MIP) Technique Reinforced with Graphene Oxide and Its Evaluation Using Polarography

Galega officinalis products have been used for the control of diabetes (type 2) across the world. Experimental and clinical evaluations of galegine substance produced by a medicinal plant (Galega officinalis) provided the pharmacological and chemical basis for metformin discovery which was confirmed for diabetes therapy. In this paper, the molecularly imprinted polymer (MIP) was synthesized for galegine, using galegine as a template molecule, methacrylic acid (MAA) as a functional monomer, ethylene glycol dimethacrylate (EGDMA) as a cross-linker, azobisisobutyronitrile (AIBN) as a reaction initiator, and acetonitrile as a solvent. The assisted functional groups, morphology, topographic image of surface, and crystalline structure of synthesized MIP were characterized by FT-IR spectroscopy, field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) images, and XRD diffraction pattern techniques, respectively. Also, the performance of the mentioned electrode was quantified and qualified by the differential pulse voltammetry technique (DPV). The galegine amount was determined with the polarographic technique. In this research, the galegine extraction conditions were optimized and graphene nanoparticles were used to increase the adsorption. In addition, different parameters affecting extraction were investigated such as MIP adsorbent amount, pH of solution, effect of the surfactant, and ionic compound to achieve high recovery percent. The recovery percent, limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation (RSD %) were 4.101 μg·mL^-1, 12.427 μg·mL^-1, and 1.199% (n = 3), respectively. The results show that the prepared MIP can be used as an effective and inexpensive adsorbent for preconcentration and galegine extraction from a natural sample. It is noteworthy that this developed method was used successfully to determine galegine extracted from Galega officinalis L.

Synthesis of molecularly imprinted polymers using a functionalized initiator for chiral-selective recognition of propranolol

We present a new concept of synthesis for preparation of molecularly imprinted polymers using a functionalized initiator to replace the traditional functional monomer. Using propranolol as a model template, a carboxyl-functionalized radical initiator was demonstrated to lead to high-selectivity polymer particles prepared in a standard precipitation polymerization system. When a single enantiomer of propranolol was used as template, the imprinted polymer particles exhibited clear chiral selectivity in an equilibrium binding experiment. Unlike the previous molecular imprinting systems where the active free radicals can be distant from the template-functional monomer complex, the method reported in this work makes sure that the actual radical polymerization takes place in the vicinity of the template-associated functional groups. The success of using functional initiator to synthesize molecularly imprinted polymers brings in new possibilities to improve the functional performance of molecularly imprinted synthetic receptors.

Progress in Molecularly Imprinted Polymers for Biomedical Applications

Background:

Molecularly Imprinted Polymers (MIPs), a type of biomimetic materials have attracted considerable interest owing to their cost-effectiveness, good physiochemical stability, favorable specificity and selectivity for target analytes, and long shelf life. These materials are able to mimic natural recognition entities, including biological receptors and antibodies, providing a versatile platform to achieve the desirable functionality for various biomedical applications.

Objective:

In this review article, we introduce the most recent development of MIPs to date. We first highlight the advantages of using MIPs for a broad range of biomedical applications. We then review their various methods of synthesis along with their latest progress in biomedical applications, including biosensing, drug delivery, cell imaging and drug discovery. Lastly, the existing challenges and future perspectives of MIPs for biomedical applications are briefly discussed.

Conclusion:

We envision that MIPs may be used as potential materials for diverse biomedical applications in the near future.

Solid-phase microextraction: An appealing alternative for the determination of endogenous substances - A review

The determination of endogenous substances is of great significance for obtaining important biotic information such as biological components, metabolic pathways and disease biomarkers in different living organisms (e.g. plants, insects, animals and humans). However, due to the complex matrix and the trace concentrations of target analytes, the sample preparation procedure is an essential step before the analytes of interest are introduced into a detection instrument. Solid-phase microextraction (SPME), an emerging sample preparation technique that integrates sampling, extraction, concentration, and sample introduction into one step, has gained wide acceptance in various research fields, including in the determination of endogenous compounds. In this review, recent developments and applications of SPME for the determination of endogenous substances over the past five years are summarized. Several aspects, including the design of SPME devices (sampling configuration and coating), applications (in vitro and in vivo sampling), and coupling with emerging instruments (comprehensive two-dimensional gas chromatography (GC × GC), ambient mass spectrometry (AMS) and surface enhanced Raman scattering (SERS)) are involved. Finally, the challenges and opportunities of SPME methods in endogenous substances analysis are also discussed.

Ultrasound combined with manganese-oxide nanoparticles loaded on activated carbon for extraction and pre-concentration of thymol and carvacrol in methanolic extracts of Thymus daenensis, Salvia officinalis, Stachys pilifera, Satureja khuzistanica, and mentha, and water samples

A dispersive micro solid-phase extraction (DMSPE) technique was developed using manganese-oxide nanoparticles loaded on activated carbon (Mn₃O₄-NPs-AC) as an effective sorbent combined with ultrasound for the extraction and determination of a trace amount of thymol and carvacrol in methanolic extracts of Thymus daenensis, Salvia officinalis, Stachys pilifera, Satureja khuzistanica and mentha, and water samples.

Synthesis of a molecularly imprinted polymer and its application in selective extraction of fenoprofen from wastewater

The presence of various classes of pharmaceutical drugs in different environmental compartments has been reported worldwide. In South Africa, the detection of pharmaceuticals especially the non-steroidal anti-inflammatory drugs is recent, and more studies are being done in order to fully understand their fate in the aquatic environment. With considerations for the need of better sample preparation techniques, this study synthesized a molecularly imprinted polymer for the selective extraction of a non-steroidal anti-inflammatory drug, fenoprofen in aqueous environmental samples. Batch adsorption studies showed that adsorption of fenoprofen onto the cavities of the polymer followed a Langmuir isotherm as well as a pseudo second order model implying formation of a monolayer on the surface through chemisorption. The polymer had a maximum adsorption capacity of 38.8 mg g^-1 and a Langmuir surface area of 1607 m² g^-1. The imprinted polymer was then used as the selective sorbent for solid phase extraction in the analysis of fenoprofen from wastewater followed by chromatographic determination. The analytical method gave a detection limit of 0.64 ng mL^-1 and recovery of 99.6%. The concentration of fenoprofen detected in influent and effluent samples from two wastewater treatment plants ranged from 24 to 58 ng mL^-1. The ability of the treatment plants to remove fenoprofen during wastewater processing based on the difference in concentrations in influent and effluent samples was found to be 41%. This work has shown that there is a possibility of release of fenoprofen from wastewater treatment plants into surface water sources.

Development of a folic acid molecularly imprinted polymer and its evaluation as a sorbent for dispersive solid-phase extraction by liquid chromatography coupled to mass spectrometry

This work shows the development of a molecularly imprinted polymer to determine folic acid (FA) in food extracts by using dispersive solid-phase extraction and liquid chromatography coupled to mass spectrometry (LC-MS). Herewith, combinations of monomers (methacrylic acid (MAA), 4-vinylpyridine (4VPy) and vinylbenzyl trimethylammonium chloride (VBTMAC)) and crosslinkers (ethylene glycol dimethacrylate (EGDMA) and divinyl benzene (DVB)) were tested in appropriate solvents. Isotherm tests revealed that the MIP with the highest affinity was obtained by combining VBTMAC and EGDMA. Having checked the appropriate template-monomer-crosslinker ratio, the FA MIP was analyzed for its kinetic and equilibrium binding properties, proving very high affinity (more than 2.5 mmol g-1) and MIP/NIP ratio (up to 37). The FA MIP was used to selectively isolate the compound of interest from lettuce and cookies matrices using a dispersive solid-phase extraction protocol (which exhibited appropriate recovery and repeatability, ≥79.50% and ≤13.41 (%RSD in terms of area values), respectively, as well as absence of matrix effect); the resulting extracts were analyzed by a rapid and reliable LC-MS method.

Perspectives on potentiating immunocapture-LC-MS for the bioanalysis of biotherapeutics and biomarkers

The integration of ligand-binding assay and LC-MS/MS (immunocapture-LC-MS) has unleashed the combined advantages of both powerful techniques for addressing the ever increasing bioanalytical challenges for biotherapeutics and biomarker assays. The highly specific, selective and sensitive characteristics of the immunocapture-LC-MS-based assays have enabled the determination of biotherapeutics and biomarkers in biomatrices with ease of method development, less requirements on key reagents as well as structural specificity for endogenous and engineered biomolecules. In addition, the versatile immunocapture-LC-MS technology has expanded into many challenging areas to enhance mechanistic studies of drug interactions with their targets. This paper intends to summarize our perspectives on enhancing the use of immunocapture-LC-MS in drug discovery and development for emerging new modalities.