Multivariate optimization of solvent bar microextraction combined with HPLC-UV for determination of trace amounts of vincristine in biological fluids

A rapid and sensitive LC-ESI-MS/MS method for determining vincristine in micro-volumes of plasma for pediatric cancer patients

Vincristine is a natural vinca alkaloid drug, which is widely used in pediatric cancer treatment with dose-dependent neurotoxicity. Thus far, little is known about the association between neurotoxicity and plasma vincristine concentration, which markedly varies among individuals. Routine therapeutic drug monitoring (TDM) can be seen as a reliable strategy to improve efficacy and reduce side effects. Therefore, a rapid, sensitive, and reproducible method is critical for the clinical implementation of TDM. In this study, micro-volume (50 μL) human plasma samples were prepared by a simple one-step protein precipitation method with acetonitrile. Chromatographic separation of vincristine and its internal standard vincristine-d₃ from background noise was achieved on a Kinetex C18 column (2.1 mm × 50 mm, 1.7 μm) with a gradient elution program at a flow rate of 0.3 mL min^-1 in 4 min. The mass spectrometric detection was performed in electrospray ionization multiple reaction monitoring mode using the ion transitions of 825.4 → 765.1 for vincristine, and 828.2 → 768.2 for vincristine-d₃, respectively. As a result, no matrix effect was observed. The lower limit of quantification was 0.5 ng mL^-1 with a precision of 14.6% and an accuracy of 97.4%. The calibration curve was linear from 0.5 to 100 ng mL^-1 (r² > 0.99, n = 8). The intra- and inter-batch precision and accuracy, recovery, and stability of the new method were all within the acceptable criteria. The method was successfully applied to monitor the vincristine concentration for six pediatric cancer patients. Arguably, such proactive TDM of vincristine may be helpful to manage the treatment for these cancer patients.

Proactive therapeutic drug monitoring of vincristine in pediatric and adult cancer patients: current supporting evidence and future efforts

Vincristine (VCR), an effective antitumor drug, has been utilized in several polytherapy regimens for acute lymphoblastic leukemia, neuroblastoma and rhabdomyosarcoma. However, clinical evidence shows that the metabolism of VCR varies greatly among patients. The traditional based body surface area (BSA) administration method is prone to insufficient exposure to VCR or severe VCR-induced peripheral neurotoxicity (VIPN). Therefore, reliable strategies are urgently needed to improve efficacy and reduce VIPN. Due to the unpredictable pharmacokinetic changes of VCR, therapeutic drug monitoring (TDM) may help to ensure its efficacy and to manage VIPN. At present, there is a lot of supporting evidence for the suitability of applying TDM to VCR therapy. Based on the consensus guidelines drafted by the International Association of Therapeutic Drug Monitoring and Clinical Toxicology (IATDMCT), this review aimed to summarize various available data to evaluate the potential utility of VCR TDM for cancer patients. Of note, valuable evidence has accumulated on pharmacokinetics variability, pharmacodynamics, drug exposure-clinical response relationship, biomarkers for VIPN prediction, and assays for VCR monitoring. However, there are still many relevant clinical pharmacological questions that cannot yet be answered merely based on insufficient evidence. Currently, we cannot recommend a therapeutic exposure range and cannot yet provide a dose-adaptation strategy for clinicians and patients. In areas where the evidence is not yet sufficient, more research is needed in the future. The precision medicine of VCR cannot rely on TDM alone and needs to consider the clinical, environmental, genetic background and patient-specific factors as a whole.

Development of the DNA-based voltammetric biosensor for detection of vincristine as anticancer drug

In the article presented herein, a deoxyribonucleic acid (DNA) biosensor is introduced for Vincristine determination in pharmaceutical preparations based on the modification of screen printed electrode (SPE) with double-stranded DNA (ds-DNA), polypyrrole (PP), peony-like CuO:Tb³⁺ nanostructure (P-L CuO:Tb³⁺ NS). The developed sensor indicated a wide linear response to Vincristine concentration ranged from 1.0 nM to 400.0 μM with a limit of detection as low as .21 nM. The intercalation of Vincristine with DNA guanine led to the response. The optimized parameters for the biosensor performance were ds-DNA/Vincristine interaction time, DNA concentration and type of buffer solution. The docking investigation confirm the minor groove interaction between guanine base at surface of or ds-DNA/PP/P-L CuO:Tb³⁺ NS/SPE and Vincristine. The proposed sensor could successfully determine Vincristine in Vincristine injections and biological fluids, with acceptable obtains.

Sensitive determination of vincristine in plasma of children with leukaemia using vortex-assisted dispersive liquid-liquid microextraction based on hydrophobic deep eutectic solvent

Vincristine has a wide spectrum of clinical activity and is currently used in the treatment of leukemia. Despite its high therapeutic properties, vincristine has common side effects. Accordingly, it is desirable to determine vincristine in plasma for the use of the drug with strict monitoring. In the present research, for the first time a hydrophobic deep eutectic solvent (DES) composed of methyltrioctylammonium chloride (MTOAC) and n-butanol in a molar ratio of 1 : 3 was used as the extractant in dispersive liquid-liquid microextraction (DLLME) for the extraction and determination of vincristine in the plasma of children with leukemia prior to its analysis by high-performance liquid chromatography-ultraviolet detection (HPLC-UV). Under optimal experimental conditions, the method showed good linearity with a correlation coefficient (R 2) of 0.9986 in the linear range of 0.06-300 μg L-1, low limit of detection of 0.02 μg L-1 and acceptable extraction efficiency (EE) of 88.4%. In the final stage of the study, this proposed technique was successfully applied to determine vincristine in real plasma, and the obtained results demonstrated the ability of the synthesized DES to extract drugs from biological fluids.

Preconcentration and Determination of Clomiphene Citrate Using Hollow- Fiber Liquid-phase Mixroextraction Coupled with HPLC-UV Detection

Background:

Currently, ovulation stimulation with clomiphene citrate is the most commonly used treatment in infertility. It stimulates the secretion of gonadotropins necessary for the release of an egg.

Objective:

In this study, a microextraction method of liquid phase was utilized using hollow fiber with high-performance liquid chromatography and ultraviolet (HPLC-UV) detector for pre-concentration and measuring clomiphene citrate in plasma.

Method:

Clomiphene citrate was extracted from a 15 ml sample solution with pH=11 in an organic solvent (Octanol), which was located in the vent wall of the fiber. Subsequently, the drug was introduced into an internal organic solvent into an acidic pH=2 receptor that was located inside the fiber. In the following, effective factors in microextraction including pH of the donor phases and acceptor phases, type of organic solvent, ion phase strength, extraction time and stirring speed were investigated and optimized.

Results:

After extracting the drug with an optimal pre-concentration factor of 212, extraction recovery was 91%, the detection limit was 1.50 ng/ml, limiting the linearity of 5-1000 ng/mL and %RSD=6.98.

Conclusion:

The proposed method was successfully implemented and optimized for trace detection of clomiphene citrate in plasma, therefore the clinical and investigational application of this method is facilitated by this study.

Recent applications of microextraction sample preparation techniques in biological samples analysis

Analysis of biological samples is affected by interfering substances with chemical properties similar to those of the target analytes, such as drugs. Biological samples such as whole blood, plasma, serum, urine and saliva must be properly processed for separation, purification, enrichment and chemical modification to meet the requirements of the analytical instruments. This causes the sample preparation stage to be of undeniable importance in the analysis of such samples through methods such as microextraction techniques. The scope of this review will cover a comprehensive summary of available literature data on microextraction techniques playing a key role for analytical purposes, methods of their implementation in common biological samples, and finally, the most recent examples of application of microextraction techniques in preconcentration of analytes from urine, blood and saliva samples. The objectives and merits of each microextration technique are carefully described in detail with respect to the nature of the biological samples. This review presents the most recent and innovative work published on microextraction application in common biological samples, mostly focused on original studies reported from 2017 to date. The main sections of this review comprise an introduction to the microextraction techniques supported by recent application studies involving quantitative and qualitative results and summaries of the most significant, recently published applications of microextracion methods in biological samples. This article considers recent applications of several microextraction techniques in the field of sample preparation for biological samples including urine, blood and saliva, with consideration for extraction techniques, sample preparation and instrumental detection systems.

Solvent bar microextraction combined with HPLC-DAD for simultaneous determination of diuretics in human urine and plasma samples

BACKGROUND

A simple and powerful microextraction procedure, the solvent bar microextraction (SBME), was used for the simultaneous determination of two diuretics, furosemide and spironolactone in human urine and plasma samples, using high-performance liquid chromatography coupled with diode array detection (HPLC-DAD).

METHODS

The appropriate amount (2 µL) of 1-octanol as an organic solvent confined within (2.5 cm) of a porous hollow fiber micro-tube, sealed at both ends was used for this procedure. The conditions for the SBME were optimized in water and the analytical performance were examined in spiked human urine and plasma samples.

RESULTS

The optimized method exhibited good linearity (R2 > 0.997) over the studied range of higher than 33 to 104 µg L-1 for furosemide and spironolactone in urine and plasma samples, illustrating a satisfactory precision level with RSD values between 2.1% and 9.1%.

DISCUSSION

The values of the limits of detection were found to be in the range of 6.39 to 9.67 µg L-1, and extraction recovery˃ 58.8% for both diuretics in urine and plasma samples. The applicability and effectiveness of the proposed method for the determination of furosemide and spironolactone in patient urine samples were tested.

CONCLUSION

In comparison with reference methods, the attained results demonstrated that SBME combined with HPLC-DAD was proved to be simple, inexpensive, and promising analytical technology for the simultaneous determination of furosemide and spironolactone in urine and plasma samples.

A Comprehensive Review on Developed Pharmaceutical Analysis Methods by Iranian Analysts in 2018

This article summarizes the publishing activities including bioanalytical and pharmaceutical analyses researches carried out in Iran in 2018 in order to connect academic researchers to those in industry, medical care units and hospitals. A wide spectrum of analytical methods has been used to determine and/or evaluate drug levels in the biological samples, based on physical, chemical and biochemical principles. We have compiled a concise survey of the literature covering 125 reports and tabulated the relevant analytical parameters. Chromatographic and electrochemical methods were found to be the technique of choice for many workers and almost 83% studies were performed by using these methods. This is the first annual review of the literature searching in SCOPUS database for published bioanalytical and pharmaceutical analysis researches in Iran.

Microextraction approaches for bioanalytical applications: An overview

Biological samples are usually complex matrices due to the presence of proteins, salts and a variety of organic compounds with chemical properties similar to those of the target analytes. Therefore, sample preparation is often mandatory in order to isolate the analytes from troublesome matrices before instrumental analysis. Because the number of samples in drug development, doping analysis, forensic science, toxicological analysis, and preclinical and clinical assays is steadily increasing, novel high throughput sample preparation approaches are calling for. The key factors in this development are the miniaturization and the automation of the sample preparation approaches so as to cope with most of the twelve principles of green chemistry. In this review, recent trends in sample preparation and novel strategies will be discussed in detail with particular focus on sorptive and liquid-phase microextraction in bioanalysis. The actual applicability of selective sorbents is also considered. Additionally, the role of 3D printing in microextraction for bioanalytical methods will be pinpointed.

Hollow fiber liquid-phase microextraction based on the use of a rotating extraction cell: A green approach for trace determination of rhodamine 6G and methylene blue dyes

In this work, a novel mode of hollow fiber liquid-phase microextraction (HF-LPME) technique namely rotating extraction cell solvent bar microextraction (REC-SBME) was introduced. The proposed method was applied for the preconcentration of methylene blue (MB) and rhodamine 6G (RG) in some real samples, including soft drink, lipstick, environmental water, and wastewater samples. In the extraction setup, two pieces of hollow fibers were fixed on a mechanical support and immersed in a rotating extraction cell containing the sample solution during the extraction process. The rotation of the extraction cell by using an electric motor led to an enhancement in the mass transfer of the dyes from the sample solution into the organic acceptor phase. In the developed procedure, the UV-Vis spectrophotometry and HPLC-UV/Vis were employed as detection methods for the analysis of the acceptor phase and the obtained results were compared. Optimization of the extraction factors affecting the method, including organic solvent type, sample solution pH, extraction time, rotational rate, the volume of sample and acceptor solutions, salt addition, and temperature was performed in order to obtain the best preconcentration factor. Linear dynamic range obtained by HPLC-UV/Vis and spectrophotometry was observed in the ranges of 2.5-1200 ng mL^-1 for RG and 1.6-600 ng mL^-1 for MB with R² more than 0.9971. Also, relative standard deviation (RSD) values (n = 3) less than 3.8% were obtained. The good conformity of the obtained results makes UV-Vis spectrophotometric method an ideal tool for routine analysis of trace dyes in the complex matrices after REC-SBME.

Solvent stir bar microextraction technique with three-hollow fiber configuration for trace determination of nitrite in river water samples

In this work, trace determination of nitrite in river water samples was studied using solvent stir bar microextraction system with three-hollow fiber configuration (3HF-SSBME) as a preconcentration step prior to UV-Vis spectrophotometry. The obtained results showed that the increase in the number of solvent bars can improve the extraction performance by increasing the contact area between acceptor and sample solutions. The extraction process relies on the well-known oxidation-reduction reaction of nitrite with iodide excess in acidic donor phase to form triiodide, and then its extraction into organic acceptor phase using a cationic surfactant. Various extraction parameters affecting the method were optimized and examined in detail. Detection limit of 1.6 μg L^-1 and preconcentration factor of 282 can be attained after an extraction time of 8 min under the optimum conditions of this technique. The proposed method showed a linear response up to 1000 μg L^-1 (r² = 0.996) with relative standard deviation values less than 4.0%. The accuracy of the developed method was assessed using the Griess technique. Finally, the proposed method was successfully employed for quantification of nitrite in river water samples (Ghezelozan, Zanjan, Iran).