Colloidal stability of oleic- and ricinoleic-acid-coated magnetic nanoparticles in organic solvents

Aging iridium oxide catalyst inks: a formulation strategy to enhance ink processability for polymer electrolyte membrane water electrolyzers

Iridium oxide (IrO2) is recognized as a state-of-art catalyst for anodes of low-temperature polymer-electrolyte membrane water electrolyzers (PEMWE), one of the promising clean energy technologies to produce hydrogen, a critical energy carrier for decarbonization. However, typical IrO2 ink formulations are challenging to process in liquid-film coating processes because of their poor stability against gravitational settling and low viscosities. Here we report on time evolution of the microstructure of concentrated IrO2 inks in a water-rich dispersion medium, probed using a combination of rheology and X-ray scattering for up to four days. The inks progressively evolve from a predominantly liquid-like to a gel-like material with increasing aging time that can be leveraged as a formulation strategy to enhance their stability against sedimentation, and processability during electrode fabrication. We also elucidate the aging behavior by investigating the effects of ink formulation composition - ionomer concentration and solvent composition - and using the extended-DLVO theory. The implications of aging on electrode fabrication, including via direct coating onto membranes and porous transport layers, and membrane-electrode-assembly performance has also been examined. Our findings offer not only a facile but also an environmentally benign formulation strategy to enhance ink processibility, expand practical fabrication approaches, and advance PEMWE manufacturing.

Osmotic Attraction: A New Mechanism of Nanoparticle Aggregation

Solvent-induced interactions of nanoparticles in colloidal solutions can substantially affect their physicochemical and transport properties. Predicting these interactions is challenging because the natural causes of the interactions are unclear. Here, we present a comprehensive experimental and theoretical study of the coagulation stability of the surfacted magnetic colloids. The magnetite nanoparticles stabilized by erucic acid were dispersed in 19 different good solvents. The colloidal stability was reduced by the gradual addition of a precipitant. As a precipitant, 19 other liquids were used. We show that coagulation is not associated with either dispersion or magnetic interactions. The coagulation mechanism is due to the osmotic attraction of nanoparticles induced by a specific local distribution of precipitant molecules. The precipitant molecules are repelled from the hydrophobic tails of the surfactant and form a depleted zone inside the surfactant layer leading to the appearance of the osmotic attraction between the nanoparticles and their subsequent coagulation when the critical concentration of the precipitant is reached. The quantitative description of the phenomenon is carried out within the framework of the generalized Asakura-Oosawa model of the attractive depletion forces between two adjacent particles and the Langmuir adsorption model for the equilibrium concentration of precipitant molecules in the surfactant layer of nanoparticles. The calculated precipitant critical concentrations, the coagulation curves of the polydisperse systems, and the variation of the coagulation criterion occurring upon changing the surfactant are in good agreement with the experimental data. The osmotic attraction mechanism is equally suitable for nanoparticles of any nature─plasmonic, semiconductor, or magnetic. This is determined by the surfactant-solvent interactions and is generic for many solvent-mediated systems taken at arbitrary concentrations of precipitant.

Self-Assembled Artificial Nanocilia Actuators

Self-assembly of nanoparticles (NPs) is a powerful route to constructing higher-order structures. However, the programmed self-assembly of NPs into non-close-packed, 3D, shape-morphing nanocilia arrays remains elusive, whereas dynamically actuated nanometer cilia are universal in living systems. Here, a programmable self-assembly strategy is presented that can direct magnetic NPs into a highly ordered responsive artificial nanocilia actuator with exquisite nanometer 3D structural arrangements. The self-assembled artificial NP cilia can maintain their structural integrity through the interplay of interparticle interactions. Interestingly, the nanocilia can exhibit a field-responsive actuation motion through "rolling and sliding" between assembled NPs rather than bending the entire ciliary beam. It is demonstrated that oleic acid coated over the NPs acts as a lubricating bearing and enables the rolling/sliding-based actuation of the cilia.

Bio-nano interactions: binding proteins, polysaccharides, lipids and nucleic acids onto magnetic nanoparticles

The major interest in nanoparticles as an application platform for biotechnology arises from their high surface-to-volume ratio. Iron oxide nanoparticles (IONPs) are particularly appealing due to their superparamagnetic behavior, which enables bioseparation using external magnetic fields. In order to design advanced biomaterials, improve binding capacities and develop innovative processing solutions, a thorough understanding of the factors governing organic-inorganic binding in solution is critical but has not yet been achieved, given the wide variety of chemical and physical influences. This paper offers a critical review of experimental studies of the interactions between low cost IONPs (bare iron oxides, silica-coated or easily-functionalized surfaces) and the main groups of biomolecules: proteins, lipids, nucleic acids and carbohydrates. Special attention is devoted to the driving forces and interdependencies responsible of interactions at the solid-liquid interface, to the unique structural characteristics of each biomolecular class, and to environmental conditions influencing adsorption. Furthermore, studies focusing on mixtures, which are still rare, but absolutely necessary to understand the biocorona, are also included. This review concludes with a discussion of future work needed to fill the gaps in knowledge of bio-nano interactions, seeking to improve nanoparticles' targeting capabilities in complex systems, and to open the door for multipurpose recognition and bioseparation processes.

Designing Nanoparticles and Nanoalloys for Gas-Phase Catalysis with Controlled Surface Reactivity Using Colloidal Synthesis and Atomic Layer Deposition

Supported nanoparticles are commonly applied in heterogeneous catalysis. The catalytic performance of these solid catalysts is, for a given support, dependent on the nanoparticle size, shape, and composition, thus necessitating synthesis techniques that allow for preparing these materials with fine control over those properties. Such control can be exploited to deconvolute their effects on the catalyst's performance, which is the basis for knowledge-driven catalyst design. In this regard, bottom-up synthesis procedures based on colloidal chemistry or atomic layer deposition (ALD) have proven successful in achieving the desired level of control for a variety of fundamental studies. This review aims to give an account of recent progress made in the two aforementioned synthesis techniques for the application of controlled catalytic materials in gas-phase catalysis. For each technique, the focus goes to mono- and bimetallic materials, as well as to recent efforts in enhancing their performance by embedding colloidal templates in porous oxide phases or by the deposition of oxide overlayers via ALD. As a recent extension to the latter, the concept of area-selective ALD for advanced atomic-scale catalyst design is discussed.

Castor oil: a suitable green source of capping agent for nanoparticle syntheses and facile surface functionalization

Castor oil (CO) is an inedible vegetable oil (VO) that has been employed extensively as a bioresource material for the synthesis of biodegradable polymers, cosmetics, lubricants, biofuels, coatings and adhesives. It is used in medicine, pharmaceuticals and biorefineries, due to its versatile chemistry. However, there has been less focus on CO as an alternative to toxic and expensive solvents, and capping/stabilizing agents routinely used in nanoparticle syntheses. It provides a richer chemistry than edible VOs as a solvent for green syntheses of nanoparticles. CO, being the only rich source of ricinoleic acid (RA), has been used as a solvent, co-solvent, stabilizing agent and polyol for the formation of polymer-nanoparticle composites. RA is a suitable alternative to oleic acid used as a capping and/or stabilizing agent. Unlike oleic acid, it provides a facile route to the functionalization of surfaces of nanoparticles and the coating of nanoparticles with polymers. For applications requiring more polar organic solvents, RA is more preferred than oleic acid. In this review, we discuss the production, chemical and physical properties, triglyceride and fatty acid (FA) compositions and applications of CO, focusing on the use of CO and RA as well as other VOs and FAs in syntheses of nanoparticles and surface functionalization.

Nanocomposites comprised of homogeneously dispersed magnetic iron-oxide nanoparticles and poly(methyl methacrylate)

Nanocomposites with a high, uniform loading of magnetic nanoparticles are very desirable for applications such as electromagnetic shielding and cancer treatment based on magnetically induced hyperthermia. In this study, a simple and scalable route for preparing nanocomposites with a high, uniform loading of magnetic nanoparticles is presented. The magnetic iron-oxide nanoparticles were functionalized with a methacrylate-based monomer that copolymerized in a toluene solution with the methyl methacrylate (MMA) monomer. The resulting suspension of magnetic nanoparticles decorated with poly(methyl methacrylate) (PMMA) chains in toluene were colloidal, even in the presence of a magnetic field gradient. Nanocomposites were precipitated from these suspensions. The transmission electron microscopy investigation of the prepared nanocomposites revealed that the magnetic nanoparticles were homogeneously dispersed in the PMMA matrix, even in amounts up to 53 wt %. The uniform dispersion of the nanoparticles in the PMMA matrix was attributed to the good solvation of the grafted PMMA chains from the magnetic nanoparticles by the PMMA chains of the matrix. The nanocomposites were superparamagnetic and exhibited large values for the saturation magnetization of up to 36 emu/g. Moreover, the nanocomposite with the largest amount of incorporated nanoparticles exhibited relatively large values for the specific power loss when subjected to alternating magnetic fields, giving this material great potential for the magnetically induced hyperthermia-based treatment of cancer.

Surface Modification of SPIONs in PHBV Microspheres for Biomedical Applications

Surface modification of superparamagnetic iron oxide nanoparticles (SPIONs) has been introduced with lauric acid and oleic acid via co-precipitation and thermal decomposition methods, respectively. This modification is required to increase the stability of SPIONs when incorporated in hydrophobic, biodegradable and biocompatible polymers such as poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). In this work, the solid-in-oil-in-water (S/O/W) emulsion-solvent extraction/evaporation method was utilized to fabricate magnetic polymer microspheres incorporating SPIONs in PHBV. The prepared magnetic PHBV microspheres exhibited particle sizes <1 µm. The presence of functional groups of lauric acid, oleic acid and iron oxide in the PHBV microspheres was confirmed by Fourier Transform Infrared spectroscopy (FTIR). X-ray diffraction (XRD) analysis was performed to further confirm the success of the combination of modified SPIONs and PHBV. Thermogravimetric analysis (TGA) indicated that PHBV microspheres were incorporated with SPIONs^Lauric as compared with SPIONs^Oleic. This was also proven via magnetic susceptibility measurement as a higher value of this magnetic property was detected for PHBV/SPIONs^Lauric microspheres. It was revealed that the magnetic PHBV microspheres were non-toxic when assessed with mouse embryotic fibroblast cells (MEF) at different concentrations of microspheres. These results confirmed that the fabricated magnetic PHBV microspheres are potential candidates for use in biomedical applications.

Tumor targeting by lentiviral vectors combined with magnetic nanoparticles in mice

Nanomaterials conjugated or complexed with biological moieties such as antibodies, polymers or peptides appear to be suitable not only for drug delivery but also for specific cancer treatment. Here, biocompatible iron oxide magnetic nanoparticles (MNPs) with or without a silica shell coupled with lentiviral vectors (LVs) are proposed as a combined therapeutic approach to specifically target gene expression in a cancer mouse model. Initially, four different MNPs were synthesized and their physical properties were characterized to establish and discriminate their behaviors. MNPs and LVs strictly interacted and transduced cells in vitro as well as in vivo, with no toxicity or inflammatory responses. By injecting LV-MNPs complexes intravenously, green fluorescent protein (GFP) resulted in a sustained long-term expression. Furthermore, by applying a magnetic field on the abdomen of intravenous injected mice, GFP positive cells increased in livers and spleens. In liver, LV-MNPs were able to target both hepatocytes and non-parenchymal cells, while in a mouse model with a grafted tumor, intra-tumor LV-MNPs injection and magnetic plaque application next to the tumor demonstrated the efficient uptake of LV-MNPs complexes with high number of transduced cells and iron accumulation in the tumor site. More important, LV-MNPs with the application of the magnetic plaque spread in all the tumor parenchyma and dissemination through the body was prevented confirming the efficient uptake of LV-MNPs complexes in the tumor. Thus, these LV-MNPs complexes could be used as multifunctional and efficient tools to selectively induce transgene expression in solid tumor for therapeutic purposes.

STATEMENT OF SIGNIFICANCE

Our study describes a novel approach of combining magnetic properties of nanomaterials with gene therapy. Magnetic nanoparticles (MNPs) coated with or without a silica shell coupled with lentiviral vectors (LVs) were used as vehicle to target biological active molecules in a mouse cancer model. After in situ injection, the presence of MNP under the magnetic field improve the vector distribution in the tumor mass and after systemic administration, the application of the magnetic field favor targeting of specific organs for LV transduction and specifically can direct LV in specific cells (or avoiding them). Thus, our findings suggest that LV-MNPs complexes could be used as multifunctional and efficient tools to selectively induce transgene expression in solid tumor for therapeutic purposes.

Growth behavior of gold nanoparticles synthesized in unsaturated fatty acids by vacuum evaporation methods

Physical vapor evaporation of metals on low vapor pressure liquids is a simple and clean method to synthesize nanoparticles and thin films, though only little work has been conducted so far. Here, gold nanoparticles were synthesized by vacuum evaporation (VE) methods in ricinoleic acid and oleic acid, two typical unsaturated fatty acids (UFAs). The two solvents formed black aggregates after deposition and then shrunk and finally disappeared with the progress of time. By transmission electron microscopy (TEM) images, nanoparticles in ricinoleic acids formed aggregates and then dispersed by time, while in oleic acid big aggregates were not observed in all timescales. From TEM images and small angle X-ray scattering (SAXS) measurements, the mean size of the nanoparticles was about 4 nm in both ricinoleic and oleic acids. UV-Vis spectra were also taken as a function of time and the results were consistent with the growth behavior presumed by TEM images. Air exposure had an influence on the behavior of the sample triggering the nanoparticle formation in both solvents. From control experiments, we discovered that oxygen gas triggered the phenomenon and nanoparticles function as a catalyst for the oxidation of the UFAs. It stimulates the phenomenon and in ricinoleic acid, specifically, electrons are transferred from riconleic acid to the gold nanoparticles, enhancing the surface potential of the nanoparticles and the repulsive force between their electronic double layers.

Review on thermal properties of nanofluids: Recent developments

Nanofluids are dispersions of nanomaterials (e.g. nanoparticles, nanofibers, nanotubes, nanowires, nanorods, nanosheet, or droplets) in base fluids. Nanofluids have been a topic of great interest during the last one decade primarily due to the initial reports of anomalous thermal conductivity (k) enhancement in nanofluids with a small percentage of nanoparticles. This field has been quite controversial, with multiple reports of anomalous enhancement in thermal conductivity and many other reports of the thermal conductivity increase within the classical Maxwell mixing model. Several mechanisms have been proposed for explaining the observed enhancement in thermal conductivity. The role of Brownian motion, interfacial resistance, morphology of suspended nanoparticles and aggregating behavior is investigated both experimentally and theoretically. As the understanding of specific heat capacity of nanofluids is a prerequisite for their effective utilization in heat transfer applications, it is also investigated by many researchers. From the initial focus on thermophysical properties of nanofluids, the attention is now shifted to tailoring of novel nanofluids with large thermal conductivities. Further, to overcome the limitations of traditional heat transfer media, phase change materials (PCMs) and hybrid nanofluids are being developed as effective media for thermal energy storage. This review focuses the recent progress in nanofluids research from a heat transfer perspective. Emphasis is given for the latest work on thermal properties of nanofluids, phase change materials and hybrid nanofluids. The preparation of nanofluids by various techniques, methods of stabilization, stability measurement techniques, thermal conductivity and heat capacity studies, proposed mechanisms of heat transport, theoretical models on thermal conductivity, factors influencing k and the effect of nanoinclusions in PCM are discussed in this review. Sufficient background information is also provided for the beginners.

Synthesis and characterization of ZnO nanostructures using palm olein as biotemplate

BACKGROUND

A green approach to synthesize nanomaterials using biotemplates has been subjected to intense research due to several advantages. Palm olein as a biotemplate offers the benefits of eco-friendliness, low-cost and scale-up for large scale production. Therefore, the effect of palm olein on morphology and surface properties of ZnO nanostructures were investigated.

RESULTS

The results indicate that palm olein as a biotemplate can be used to modify the shape and size of ZnO particles synthesized by hydrothermal method. Different morphology including flake-, flower- and three dimensional star-like structures were obtained. FTIR study indicated the reaction between carboxyl group of palm olein and zinc species had taken place. Specific surface area enhanced while no considerable change were observed in optical properties.

CONCLUSION

Phase-pure ZnO particles were successfully synthesized using palm olein as soft biotemplating agent by hydrothermal method. The physico-chemical properties of the resulting ZnO particles can be tuned using the ratio of palm olein to Zn cation.

Double-ligand modulation for engineering magnetic nanoclusters

Magnetic nanoclusters (MNCs) are agglomerated individual magnetic nanoparticles (MNPs) that show great promise in increasing magnetic resonance imaging (MRI) sensitivity. Here, we report an effective strategy to engineer MNCs based on double-ligand modulation to enhance MRI sensitivity. The oleic acid-coated individual MNPs self-assembled and then were enveloped by polysorbate 80, using a nanoemulsion method to prepare MNCs. By modulating the amounts of the two ligands, and thus the size and magnetic content of the resultant MNCs, we were able to enormously improve MRI sensitivity.

Preparation of iron oxide nanoparticles stabilized with biomolecules: experimental and mechanistic issues

Nanoparticles (NPs) with magnetic properties based on magnetite (Fe(3)O(4), MAG) modified with oleic acid (OA), chitosan (CS) and bovine serum albumin (BSA) have been prepared. A versatile method of synthesis was employed, involving two steps: (i) co-precipitation of MAG; and (ii) nanoprecipitation of macromolecules on as-formed MAG NPs. Experimental variables have been explored to determine the set of conditions that ensure suitable properties of NPs in terms of their size, functionality and magnetic properties. It was found that the presence of OA in Fe(+2)/Fe(+3) solutions yields MAG NPs with lower aggregation levels, while increasing initial amounts of OA may change the capability of NPs to disperse in aqueous or organic media by modifying the stabilization mechanism. Incorporation of CS was verified through Fourier transform IR spectroscopy. This biopolymer stabilizes NPs by electrostatic repulsions leading to stable ferrofluids and minimal fraction of recoverable solid NPs. BSA was successfully added to NP formulations, increasing their functionality and probably their biocompatibility. In this case too stable ferrofluids were obtained, where BSA acts as a polyelectrolyte. From the proposed methodology it is possible to achieve a wide range of NPs magnetically active intended for several applications. The required properties may be obtained by varying experimental conditions.