Dye-labeled polystyrene latex microspheres prepared via a combined swelling-diffusion technique

Universal All-In-One Lateral Flow Immunoassay with Triple Signal Amplification for Ultrasensitive and Simple Self-Testing of Treponema pallidum Antibodies

Lateral flow immunoassay (LFIA) is valued for its simplicity and rapidity for on-site screening, however, it experienced false negatives in real sample analysis due to low sensitivity. Although many signal amplification techniques can improve the sensitivity, they usually require additional complicated steps. To address these issues, taking Treponema pallidum (T. pallidum) antibodies as a model detecting target, herein, we report an all-in-one LFIA (AIO-LFIA) with triple-step signal amplification to significantly improve sensitivity while maintaining simplicity. This LFIA utilizes a biotin-streptavidin system for initial signal amplification, followed by introducing a release controller with a specific imprinted structure for timed multicomponent release, which avoids the extra steps when adding components in traditional LFIA. Particularly, a 3D-printed programmed metal in situ growth (MISG) device is integrated to localize signal enhancement at specific sites, overcoming limitations of traditional MISG and substantially reducing reagent usage and assay time, and the nitrocellulose membrane surface was much cleaner than the conventional approach, which facilitates signal readout. After optimization, the proposed AIO-LFIA is capable of visual detection down to 1 pg/mLT. pallidum antibodies in 15 min, 1000-fold lower than the gold nanoparticle-based LFIA. In clinical testing of 152 samples, the AIO-LFIA can distinguish all positive samples, outperforming commercial LFIA which missed those positive samples with relatively low antibody levels. Thus, this study presents a universal ultrasensitive and reliable AIO-LFIA strategy for infectious diseases self-testing, providing an effective promising prospect to address the challenge over emerging infectious diseases in the future.

Methyl methacrylate-modified polystyrene microspheres: an effective strategy to enhance the fluorescence of Eu-complexes

The in vitro detection applications of europium complex-doped microspheres mainly rely on strong fluorescence intensity and a well-defined morphology. In this work, using methyl methacrylate-modified polystyrene microspheres has been proven an effective strategy to enhance the fluorescence and morphology of Eu-complexes. The experimental results showed that the modification resulted in the formation of a porous structure within the polystyrene microspheres, enhancing the doping uniformity and facilitating a more significant accumulation of fluorescent molecules. Furthermore, because of their encapsulation ability, microspheres efficiently confine the fluorescent molecules within them. In addition, the nano-scale porous structure endowed the microspheres with enhanced properties without compromising solvent swelling capability, thereby significantly boosting the fluorescence performance of porous PSMMA. In lateral flow immunoassays (LFIAs), PSMMA-Eu microspheres were effectively utilized to detect fentanyl with exceptional sensitivity by capitalizing on these benefits, capable of detecting concentrations as low as 0.10 ng mL-1. This technology has significant potential for rapid point-of-care screening and clinical applications.

Transient stimulated Raman scattering spectroscopy and imaging

Stimulated Raman scattering (SRS) has been developed as an essential quantitative contrast for chemical imaging in recent years. However, while spectral lines near the natural linewidth limit can be routinely achieved by state-of-the-art spontaneous Raman microscopes, spectral broadening is inevitable for current mainstream SRS imaging methods. This is because those SRS signals are all measured in the frequency domain. There is a compromise between sensitivity and spectral resolution: as the nonlinear process benefits from pulsed excitations, the fundamental time-energy uncertainty limits the spectral resolution. Besides, the spectral range and acquisition speed are mutually restricted. Here we report transient stimulated Raman scattering (T-SRS), an alternative time-domain strategy that bypasses all these fundamental conjugations. T-SRS is achieved by quantum coherence manipulation: we encode the vibrational oscillations in the stimulated Raman loss (SRL) signal by femtosecond pulse-pair sequence excited vibrational wave packet interference. The Raman spectrum was then achieved by Fourier transform of the time-domain SRL signal. Since all Raman modes are impulsively and simultaneously excited, T-SRS features the natural-linewidth-limit spectral line shapes, laser-bandwidth-determined spectral range, and improved sensitivity. With ~150-fs laser pulses, we boost the sensitivity of typical Raman modes to the sub-mM level. With all-plane-mirror high-speed time-delay scanning, we further demonstrated hyperspectral SRS imaging of live-cell metabolism and high-density multiplexed imaging with the natural-linewidth-limit spectral resolution. T-SRS shall find valuable applications for advanced Raman imaging.

Dual Emissive Zn(II) Naphthalocyanines: Synthesis, Structural and Photophysical Characterization with Theory-Supported Insights towards Soluble Coordination Compounds with Visible and Near-Infrared Emission

Metal phthalocyaninates and their higher homologues are recognized as deep-red luminophores emitting from their lowest excited singlet state. Herein, we report on the design, synthesis, and in-depth characterization of a new class of dual-emissive (visible and NIR) metal naphthalocyaninates. A 4-N,N-dimethylaminophen-4-yl-substituted naphthalocyaninato zinc(II) complex (Zn-NMe2Nc) and the derived water-soluble coordination compound (Zn-NMe3Nc) exhibit a near-infrared fluorescence from the lowest ligand-centered state, along with a unique push-pull-supported luminescence in the visible region of the electromagnetic spectrum. An unprecedentedly broad structural (2D-NMR spectroscopy and mass spectrometry) as well as photophysical characterization (steady-state state and time-resolved photoluminescence spectroscopy) is presented. The unique dual emission was assigned to two independent sets of singlet states related to the intrinsic Q-band of the macrocycle and to the push-pull substituents in the molecular periphery, respectively, as predicted by TD-DFT calculations. In general, the elusive chemical aspects of these macrocyclic compounds are addressed, involving both reaction conditions, thorough purification, and in-depth characterization. Besides the fundamental aspects that are investigated herein, the photoacoustic properties were exemplarily examined using phantom gels to assess their tomographic imaging capabilities. Finally, the robust luminescence in the visible range arising from the push-pull character of the peripheral moieties demonstrated a notable independence from aggregation and was exemplarily implemented for optical imaging (FLIM) through time-resolved multiphoton micro(spectro)scopy.

Radiolabeling of Micro-/Nanoplastics via In-Diffusion

Micro- and nanoplastics are emerging pollutants with a concerning persistence in the environment. Research into their environmental impact requires addressing challenges related to sensitively and selectively detecting them in complex ecological media. One solution with great potential for alleviating these issues is using radiolabeling strategies. Here, we report the successful introduction of a 64Cu radiotracer into common microplastics, namely polyethylene, polyethylene terephthalate, polystyrene, polyamide, and polyvinylidene dichloride, which allows the sensitive detection of mere nanograms of substance. Utilizing a Hansen Solubility Parameter screening, we developed a swelling and in-diffusion process for tetraphenylporphyrin-complexed 64Cu, which permits one-pot labeling of polymer particles.

Tissue Clearing To Localize Microplastics via Three-Dimensional Imaging of Whole Organisms

Understanding the biological impacts of plastic pollution requires an effective methodology to detect unlabeled microplastics in environmental samples. Detecting unlabeled microplastics in an organism generally requires a digestion protocol, which results in the loss of spatial information on the distribution of microplastic within the organism and could lead to the disappearance of the smaller plastics. Fluorescence microscopy allows visualization of ingested microplastics but many labeling strategies are nonspecific and label biomass, thus limiting our ability to distinguish internalized plastics. While prelabeled plastics can be used to avoid nonspecific labeling, this approach precludes the detection of environmental microplastics in organisms. Also, using prelabeled microplastics can affect the viability of the organism and impact plastic uptake. Thus, a method was developed that employs nonspecific labeling with a tissue-clearing technique. Briefly, unlabeled microplastics are stained with a fluorescent dye after ingestion by the organism. The tissue-clearing technique then removes tissue-bound dye while rendering the structurally intact organism transparent. The internalized plastics remain stained and can be visualized in the cleared tissue with fluorescence microscopy. The technique is demonstrated using polystyrene beads in living aquatic organismsTigriopus californicusandDaphnia magnaand by spiking a model vertebrate (Cephalochordata) with different microplastics.

Toxicity and Biodistribution of Fragmented Polypropylene Microplastics in ICR Mice

Currently, polypropylene (PP) is used in various products, thus leading to high daily exposure in humans. Thus, it is necessary to evaluate the toxicological effects, biodistribution, and accumulation of PP microplastics in the human body. In this study, administration of two particle sizes of PP microplastics (approximately 5 and 10-50 µm) did not lead to any significant changes in several toxicological evaluation parameters, including body weight and pathological examination, compared with the control group in ICR mice. Therefore, the approximate lethal dose and no-observed-adverse-effect level of PP microplastics in ICR mice were established as ≥2000 mg/kg. Furthermore, we manufactured cyanine 5.5 carboxylic acid (Cy5.5-COOH)-labeled fragmented PP microplastics to monitor real-time in vivo biodistribution. After oral administration of the Cy5.5-COOH-labeled microplastics to the mice, most of the PP microplastics were detected in the gastrointestinal tract and observed to be out of the body after 24 h in IVIS Spectrum CT. Therefore, this study provides a new insight into the short-term toxicity, distribution, and accumulation of PP microplastics in mammals.

Controlling Molecular Dye Encapsulation in the Hydrophobic Core of Core-Shell Nanoparticles for In Vivo Imaging

Polymeric nanoparticles with a hydrophobic core are valuable biomedical materials with potential applications in in vivo imaging and drug delivery. These materials are effective at protecting vulnerable molecules, enabling them to serve their functions in hydrophilic physiological environments; however, strategies that allow the chemical composition and molecular weight of polymers to be tuned, forming nanoparticles to control the functional molecules, are lacking. In this article, we review strategies for designing core-shell nanoparticles that enable the effective and stable encapsulation of functional molecules for biomedical applications. IR-1061, which changes its optical properties in response to the microenvironment are useful for in vitro screening of the in vivo stability of polymeric nanoparticles. An in vitro screening test can be performed by dispersing IR-1061-encapsulated polymer nanoparticles in water, saline, buffer solution, aqueous protein solution, etc., and measuring the absorption spectral changes. Through the screening, the effects of the polarity, molecular weight, and the chiral structure of polymers consisting of polymer nanoparticles on their stability have been revealed. Based on the findings presented here, more methodologies for the effective application of various biomolecules and macromolecules with complex high-dimensional structures are expected to be developed.

Fluorescent Polypropylene Nanoplastics for Studying Uptake, Biodistribution, and Excretion in Zebrafish Embryos

Nanoplastics (NPs) are emerging environmental pollutants and are a significant concern for human health. The small size of NPs allows them to accumulate within and adversely affect various tissues by penetrating the gastrointestinal barrier. However, most toxicity studies on NPs have been based on commercial polystyrene nanoparticles. Among plastics, polypropylene (PP) is one of the most widely used, and it is continuously micronized in the environment. Although PP has high potential for forming NPs by weathering, little is known about the biological effects of polypropylene nanoplastics (PPNPs) due to a lack of particle models. Here, we present a simple and high-yield method for PPNP production by nonsolvent-induced phase separation. The synthesized PPNPs were spherical in shape, with an average diameter of 562.15 ± 118.47 nm and a high yield of over 84%. These PPNPs were fluorescently labeled by the combined swelling-diffusion method to study their biodistribution after exposure to developing zebrafish embryos (ZFEs). We found that the fluorescent PPNPs were internalized by ingestion, distributed in the intestine of developing ZFEs, and eventually excreted. This study will aid evaluations of the potential risks of environmentally relevant plastics at the nanoscale.

Designing highly emissive over-1000 nm near-infrared fluorescent dye-loaded polystyrene-based nanoparticles for in vivo deep imaging

Polystyrene-based nanoparticles (PSt NPs) prepared by emulsion polymerization are promising organic matrices for encapsulating over-thousand-nanometer near-infrared (OTN-NIR) fluorescent dyes, such as thiopyrilium IR-1061, for OTN-NIR dynamic live imaging. Herein, we propose an effective approach to obtain highly emissive OTN-NIR fluorescent PSt NPs (OTN-PSt NPs) in which the polarity of the PSt NPs was adjusted by changing the monomer ratio (styrene to acrylic acid) in the PSt NPs and the dimethyl sulfoxide concentration in the IR-1061 loading process. Moreover, OTN-PSt NPs covalently modified with poly(ethylene glycol) (PEG) (OTN-PSt-PEG NPs) showed high dispersion stability under physiological conditions and minimal cytotoxicity. Notably, the optimized OTN-PSt-PEG NPs were effective in the dynamic live imaging of mice. This methodology is expected to facilitate the design of certain polar thiopyrilium dye-loaded OTN-NIR fluorescent imaging probes with high emissivity.

By changing the ratio of acrylic acid to styrene, the loading amount of fluorescent dye can be increased and the optical properties of the resulting bioimaging probe can be improved.

Ultra-bright Raman dots for multiplexed optical imaging

Imaging the spatial distribution of biomolecules is at the core of modern biology. The development of fluorescence techniques has enabled researchers to investigate subcellular structures with nanometer precision. However, multiplexed imaging, i.e. observing complex biological networks and interactions, is mainly limited by the fundamental ‘spectral crowding’ of fluorescent materials. Raman spectroscopy-based methods, on the other hand, have a much greater spectral resolution, but often lack the required sensitivity for practical imaging of biomarkers. Addressing the pressing need for new Raman probes, herein we present a series of Raman-active  nanoparticles (Rdots) that exhibit the combined advantages of ultra-brightness and compact sizes (~20 nm). When coupled with the emerging stimulated Raman scattering (SRS) microscopy, these Rdots are brighter than previously reported Raman-active organic probes by two to three orders of magnitude. We further obtain evidence supporting for SRS imaging of Rdots at single particle level. The compact size and ultra-brightness of Rdots allows immunostaining of specific protein targets (including cytoskeleton and low-abundant surface proteins) in mammalian cells and tissue slices with high imaging contrast. These Rdots thus offer a promising tool for a large range of studies on complex biological networks.

Raman-based imaging of biomarkers is often challenging due to low sensitivity. Here, the authors use a swelling-diffusion approach to develop a series of Raman probes that are both ultra-bright and compact in size, and demonstrate multiplexed imaging of specific protein targets in cells and tissue slices.

In situ investigation of particle clustering dynamics in colloidal assemblies using fluorescence microscopy

Colloidal self-assembly is a process in which dispersed matter spontaneously form higher-order structures without external intervention. During self-assembly, packed particles are subject to solvent-evaporation induced dynamic structuring phases, which leads to microscale defects called the grain boundaries. While it is imperative to precisely control detailed grain boundaries to fabricate well-defined self-assembled crystals, the understanding of the colloidal physics that govern grain boundaries remains a challenge due to limited resolutions of current visualization approaches. In this work, we experimentally report in situ particle clustering dynamics during evaporative colloidal assembly by studying a novel microscale laser induced fluorescence technique. The fluorescence microscopy measures the saturation levels with high fidelity to identify distinct colloidal structuring regimes during self-assembly as well as cracking mechanics. The techniques discussed in this work not only enables unprecedented levels of colloidal self-assembly analysis but also have potential to be used for various sensing applications with microscopic resolutions.

TADF Dye-Loaded Nanoparticles for Fluorescence Live-Cell Imaging

Thermally activated delayed fluorescence (TADF) molecules offer nowadays a powerful tool in the development of novel organic light emitting diodes due to their capability of harvesting energy from non-emissive triplet states without using heavy-metal complexes. TADF emitters have very small energy difference between the singlet and triplet excited states, which makes thermally activated reverse intersystem crossing from the triplet states back to the singlet manifold viable. This mechanism generates a long-lived delayed fluorescence component which can be explored in the sensing of oxygen concentration, local temperature, or used in time-gated optical cell-imaging, to suppress interference from autofluorescence and scattering. Despite this strong potential, until recently the application of TADF outside lighting devices has been hindered due to the low biocompatibility, low aqueous solubility and poor performance in polar media shown by the vast majority of TADF emitters. To achieve TADF luminescence in biological media, careful selection or design of emitters is required. Unfortunately, most TADF molecules are not emissive in polar media, thus complexation with biomolecules or the formation of emissive aggregate states is required, in order to retain the delayed fluorescence that is characteristic of these compounds. Herein, we demonstrate a facile method with great generalization potential that maintains the photophysical properties of solvated dyes by combining luminescent molecules with polymeric nanoparticles. Using an established swelling procedure, two known TADF emitters are loaded onto polystyrene nanoparticles to prepare TADF emitting nanomaterials able to be used in live-cell imaging. The obtained particles were characterized by optical spectroscopy and exhibited the desired TADF emission in aqueous media, due to the polymeric matrix shielding the dye from solvent polarity effects. The prepared nanoparticles were incubated with live human cancer cells and showed very low cytotoxicity and good cellular uptake, thus making fluorescence microscopy imaging possible at low dye concentrations.

Depth-resolved NIR-II fluorescence mesoscope

NIR-II fluorescence imaging is a promising method for visualizing biological structures in deep tissue, owing to the advantages of significantly suppressed optical scattering and diminished autofluorescence in biological tissues. However, few NIR-II fluorescence imaging approaches can simultaneously achieve a large field of view, high resolution and superior penetration depth, while exhibiting optical sectioning capability. In this paper, we present a novel NIR-II fluorescence mesoscopy system based on the f-θ scanning scheme and confocal detection to overcome these limitations. When used with NIR-II fluorescent dyes, our setup performs NIR-II fluorescence imaging on samples as large as 7.5×7.5 mm2 with a lateral resolution of 6.3 µm. In addition, our system provides a depth-resolved imaging ability and zooming function. We successfully demonstrate in vivo cerebrovascular imaging of a mouse with local ischemia. Thus, our system provides new opportunities to explore the mechanism of cerebrovascular disease.

Low microalgae availability increases the ingestion rates and potential effects of microplastics on marine copepod Pseudodiaptomus annandalei

Microplastics have aroused great concern for their potential threats to marine organisms. This study investigated the interaction between three sizes of microplastics (0.5, 2, and 10 μm) and the marine copepod Pseudodiaptomus annandalei under two different microalgae concentrations (1 × 10³ and 1 × 10⁵ cells/mL). The results revealed that low microalgae supply increased microplastic ingestion through enhancing the encounter rates, and moreover increased the retention time of 0.5 μm microplastics. When the microalgae concentration was 1 × 10³ cells/mL, 0.5 μm microplastics could be observed in the copepods after depuration in clear seawater for 24 h, but almost totally excreted at 1 × 10⁵ cells/mL of microalgae. In addition, 0.5 μm microplastics induced significant effects on the ingestion of microalgae by P. annandalei both after 24 h of exposure and depuration. These results suggest that low microalgae availability may increase the ingestion and retention of microplastics in marine copepods, which might increase the ecological risk of microplastics.

Hybrid Nanoparticle Platform for Nanoscale Scintillation Proximity Assay

β-particle emitting radionuclides, such as 3H, 14C, 32P, 33P, and 35S, are important molecular labels due to their small size and the prevalence of these atoms in biomolecules but are challenging to selectively detect and quantify within aqueous biological samples and systems. Here, we present a core-shell nanoparticle-based scintillation proximity assay platform (nanoSPA) for the separation-free, selective detection of radiolabeled analytes. nanoSPA is prepared by incorporating scintillant fluorophores into polystyrene core particles and encapsulating the scintillant-doped cores within functionalized silica shells. The functionalized surface enables covalent attachment of specific binding moieties such as small molecules, proteins, or DNA that can be used for analyte-specific detection. nanoSPA was demonstrated for detection of 3H-labeled analytes, the most difficult biologically relevant β-emitter to measure due to the low energy β-particle emission, using three model assays that represent covalent and non-covalent binding systems that necessitate selectivity over competing 3H-labeled species. In each model, nmol quantities of target were detected directly in aqueous solution without separation from unbound 3H-labeled analyte. The nanoSPA platform facilitated measurement of 3H-labeled analytes directly in bulk aqueous samples without surfactants or other agents used to aid particle dispersal. Selectivity for bound 3H-analytes over unbound 3H analytes was enhanced up to 30-fold when the labeled species was covalently bound to nanoSPA, and 4- and 8-fold for two non-covalent binding assays using nanoSPA. The small size and enhanced selectivity of nanoSPA should enable new applications compared to the commonly used microSPA platform, including the potential for separation-free, analyte-specific cellular or intracellular detection.

Selective plane illumination microscopy (SPIM) with time-domain fluorescence lifetime imaging microscopy (FLIM) for volumetric measurement of cleared mouse brain samples

We have developed an imaging technique which combines selective plane illumination microscopy with time-domain fluorescence lifetime imaging microscopy (SPIM-FLIM) for three-dimensional volumetric imaging of cleared mouse brains with micro- to mesoscopic resolution. The main features of the microscope include a wavelength-adjustable pulsed laser source (Ti:sapphire) (near-infrared) laser, a BiBO frequency-doubling photonic crystal, a liquid chamber, an electrically focus-tunable lens, a cuvette based sample holder, and an air (dry) objective lens. The performance of the system was evaluated with a lifetime reference dye and micro-bead phantom measurements. Intensity and lifetime maps of three-dimensional human embryonic kidney (HEK) cell culture samples and cleared mouse brain samples expressing green fluorescent protein (GFP) (donor only) and green and red fluorescent protein [positive Förster (fluorescence) resonance energy transfer] were acquired. The results show that the SPIM-FLIM system can be used for sample sizes ranging from single cells to whole mouse organs and can serve as a powerful tool for medical and biological research.

Supermultiplexed optical imaging and barcoding with engineered polyynes

Optical multiplexing has a large impact in photonics, the life sciences and biomedicine. However, current technology is limited by a 'multiplexing ceiling' from existing optical materials. Here we engineered a class of polyyne-based materials for optical supermultiplexing. We achieved 20 distinct Raman frequencies, as 'Carbon rainbow', through rational engineering of conjugation length, bond-selective isotope doping and end-capping substitution of polyynes. With further probe functionalization, we demonstrated ten-color organelle imaging in individual living cells with high specificity, sensitivity and photostability. Moreover, we realized optical data storage and identification by combinatorial barcoding, yielding to our knowledge the largest number of distinct spectral barcodes to date. Therefore, these polyynes hold great promise in live-cell imaging and sorting as well as in high-throughput diagnostics and screening.

Polystyrene-Core, Silica-Shell Scintillant Nanoparticles for Low-Energy Radionuclide Quantification in Aqueous Media

β-particle emitting radionuclides are useful molecular labels due to their abundance in biomolecules. Detection of β-emission from 3H, 35S, and 33P, important biological isotopes, is challenging due to the low energies (Emax ≤ 300 keV) and short penetration depths (≤0.6 mm) in aqueous media. The activity of biologically relevant β-emitters is usually measured in liquid scintillation cocktail (LSC), a mixture of energy-absorbing organic solvents, surfactants, and scintillant fluorophores, which places significant limitations on the ability to acquire time-resolved measurements directly in aqueous biological systems. As an alternative to LSC, we developed polystyrene-core, silica-shell nanoparticle scintillators (referred to as nanoSCINT) for quantification of low-energy β-particle emitting radionuclides directly in aqueous solutions. The polystyrene acts as an absorber for energy from emitted β-particles and can be loaded with a range of hydrophobic scintillant fluorophores, leading to photon emission at visible wavelengths. The silica shell serves as a hydrophilic shield for the polystyrene core, enabling dispersion in aqueous media and providing better compatibility with water-soluble analytes. While polymer and inorganic scintillating microparticles are commercially available, their large size and/or high density complicates effective dispersion throughout the sample volume. In this work, nanoSCINT nanoparticles were prepared and characterized. nanoSCINT responds to 3H, 35S, and 33P directly in aqueous solutions, does not exhibit a change in scintillation response between pH 3.0 and 9.5 or with 100 mM NaCl, and can be recovered and reused for activity measurements in bulk aqueous samples, demonstrating the potential for reduced production of LSC waste and reduced total waste volume during radionuclide quantification. The limits of detection for 1 mg/mL nanoSCINT are 130 nCi/mL for 3H, 8 nCi/mL for 35S, and <1 nCi/mL for 33P.

Dual-stimuli responsive injectable microgel/solid drug nanoparticle nanocomposites for release of poorly soluble drugs

An in situ forming implant (ISFI) for drug delivery combines the potential to improve therapeutic adherence for patients with simple administration by injection. Herein, we describe the preparation of an injectable nanocomposite ISFI composed of thermoresponsive poly(N-isopropylacrylamide) based microgels and solid drug nanoparticles. Monodisperse poly(N-isopropylacrylamide) or poly(N-isopropylacrylamide-co-allylamine) microgels were prepared by precipitation polymerisation with mean diameters of approximately 550 nm at 25 °C. Concentrated dispersions of these microgels displayed dual-stimuli responsive behaviour, forming shape persistent bulk aggregates in the presence of both salt (at physiological ionic strength) and at body temperature (above the lower critical solution temperature of the polymer). These dual-stimuli responsive microgels could be injected into an agarose gel tissue mimic leading to rapid aggregation of the particles to form a drug depot. Additionally, the microgel particles aggregated in the presence of other payload nanoparticles (such as dye-containing polystyrene nanoparticles or lopinavir solid drug nanoparticles) to form nanocomposites with high entrapment efficiency of the payload. The resulting microgel and solid drug nanoparticle nanocomposites displayed sustained drug release for at least 120 days, with the rate of release tuned by blending microgels of poly(N-isopropylacrylamide) with poly(N-isopropylacrylamide-co-allylamine) microgels. Cytotoxicity studies revealed that the microgels were not toxic to MDCK-II cells even at high concentrations. Collectively, these results demonstrate a novel, easily injectable, nanocomposite ISFI that provides long-term sustained release for poorly water-soluble drugs without a burst release.

Detection of microspheres in vivo using multispectral optoacoustic tomography

We introduce a new approach to detect individual microparticles that contain NIR fluorescent dye by multispectral optoacoustic tomography in the context of the hemoglobin-rich environment within murine liver. We encapsulated a near infrared (NIR) fluorescent dye within polystyrene microspheres, then injected them into the ileocolic vein, which drains to the liver. NIR absorption was determined using multispectral optoacoustic tomography. To quantitate the minimum diameter of microspheres, we used both colorimetric and spatial information to segment the regions in which the microspheres appear. Regional diameter was estimated by doubling the maximum regional distance. We found that the minimum microsphere size threshold for detection by multispectral optoacoustic tomography images is 78.9 µm.

High-performance dissolved oxygen sensors based on platinum(ii) porphyrin embedded in polystyrene beads

A ratiometric dissolved oxygen sensor synthesized via a swelling method exhibits high sensitivity, good reversibility and photo-stability.

Temperature Response of Rhodamine B-Doped Latex Particles. From Solution to Single Particles

Nanoparticle-based temperature imaging is an emerging field of advanced applications. Herein, the sensitivity of the fluorescence of rhodamine B-doped latex nanoparticles toward temperature is described. Submicrometer size latex particles were prepared by a surfactant-free emulsion polymerization method that allowed a simple and inexpensive way to incorporate rhodamine B into the nanoparticles. Also, rhodamine B-coated latex nanoparticles dispersed in water were prepared in order to address the effect of the dye location in the nanoparticles on their temperature dependence. A better linearity of the temperature dependence emission of the rhodamine B-embedded latex particles, as compared to that of free rhodamine B dyes or rhodamine B-coated latex particles, is observed. Temperature-dependent fluorescence measurements by fluorescent confocal microscopy on individual rhodamine B-embedded latex particles were found similar to those obtained for fluorescent latex nanoparticles in solution, indicating that these nanoparticles could be good candidates to probe thermal processes as nanothermometers.

The effect of fluorophore incorporation on fluorescence enhancement in colloidal photonic crystals

Diffusion-swelling dye incorporation method improves photonic structure-induced emission enhancement.

Anomalous Fluorescence Enhancement from Double Heterostructure 3D Colloidal Photonic Crystals--A Multifunctional Fluorescence-Based Sensor Platform

Augmenting fluorescence intensity is of vital importance to the development of chemical and biochemical sensing, imaging and miniature light sources. Here we report an unprecedented fluorescence enhancement with a novel architecture of multilayer three-dimensional colloidal photonic crystals self-assembled from polystyrene spheres. The new technique uses a double heterostructure, which comprises a top and a bottom layer with a periodicity overlapping the excitation wavelength (E) of the emitters, and a middle layer with a periodicity matching the fluorescence wavelength (F) and a thickness that supports constructive interference for the excitation wavelength. This E-F-E double heterostructure displays direction-dependent light trapping for both excitation and fluorescence, coupling the modes of photonic crystal with multiple-beam interference. The E-F-E double heterostructure renders an additional 5-fold enhancement to the extraordinary FL amplification of Rhodamine B in monolithic E CPhCs, and 4.3-fold acceleration of emission dynamics. Such a self-assembled double heterostructue CPhCs may find significant applications in illumination, laser, chemical/biochemical sensing, and solar energy harvesting. We further demonstrate the multi-functionality of the E-F-E double heterostructure CPhCs in Hg (II) sensing.

Synthesis of Fluorophore-Doped Polystyrene Microspheres: Seed Material for Airflow Sensing

Kiton red 620 (KR620) doped polystyrene latex microspheres (PSLs) were synthesized via soap-free emulsion polymerization to be utilized as a relatively nontoxic, fluorescent seed material for airflow characterization experiments. Poly(styrene-co-styrenesulfonate) was used as the PSL matrix to promote KR620 incorporation. Additionally, a bicarbonate buffer and poly(diallyldimethylammonium chloride), polyD, cationic polymer were added to the reaction solution to stabilize the pH and potentially influence the electrostatic interactions between the PSLs and dye molecules. A design of experiments (DOE) approach was used to efficiently investigate the variation of these materials. Using a 4-factor, 2-level response surface design with a center point, a series of experiments were performed to determine the dependence of these factors on particle diameter, diameter size distribution, fluorescent emission intensity, and KR620 retention. Using statistical analysis, the factors and factor interactions that most significantly affect the outputs were identified. These particles enabled velocity measurements to be made much closer to walls and surfaces than previously. Based on these results, KR620-doped PSLs may be utilized to simultaneously measure the velocity and mixing concentration, among other airflow parameters, in complex flows.

In-situ fabrication of macroporous films for dye-sensitised solar cells: formation of the scattering layer and the gelation of electrolytes

Dye-sensitised solar cells (DSCs) are a promising substitute for conventional silicon solar cells. A scattering layer of submicrometer pores or particles has been widely introduced to achieve a high light-harvesting efficiency. However, many such fabrication processes require high temperatures and multiple steps to prepare the scattering layer. Here, we have developed an in-situ fabrication process for a macroporous (MP) scattering film. The macropores were formed inside the assembled cell via the dissolution of polystyrene (PS) spheres from a PS/TiO₂ composite layer caused by exposure to an electrolyte solution. Specifically, the in-situ MP scattering layer decreased the transmittance of the electrode film from 58% to below 1%. The DSCs using these MP scattering layers exhibited an increase in the efficiency of 22%. Moreover, the dissolution of the PS improved the cell stability because of the gelation of the electrolyte solution; the efficiency of the DSCs was maintained at 80% of its initial value after ageing for 20 days, whereas the efficiency of the bare-electrode DSCs was found to have decreased by 50%. We believe that in-situ porous scattering layers show great promise for next-generation flexible DSCs. Moreover, this approach can be extended to various applications that utilize porous film/liquid systems.