Interaction of chitosan and mucin in a biomembrane model environment

Development and characterization of pH-responsive Delonix regia/mucin co-poly (acrylate) hydrogel for controlled drug delivery of metformin HCl

This study introduces a pH-responsive hydrogel developed from Delonix regia and mucin co-poly(acrylate) through free radical polymerization to enhance controlled drug delivery systems. Characterization using FTIR, DSC, TGA, SEM, PXRD, and EDX spectroscopy detailed the hydrogel's amorphous and crystalline structures, thermal stability, surface characteristics, and elemental composition. Tested at a pH of 7.4-mimicking intestinal conditions-the hydrogel demonstrated significant swelling, indicating its capability for targeted drug release. With Metformin HCl as a model drug, the hydrogel exhibited a promising sustained release profile, underscoring its potential for oral administration. Safety and biocompatibility were assessed through acute oral toxicity studies in albino rabbits, encompassing biochemical, hematological, and histopathological evaluations. X-ray imaging confirmed the hydrogel's navigability through the gastrointestinal tract, affirming its application in drug delivery. By potentially mitigating gastrointestinal side effects, enhancing patient compliance, and improving therapeutic efficacy, this Delonix regia/mucin co-poly(acrylate) hydrogel represents a step in pharmaceutical sciences, exploring innovative materials and methodologies for drug delivery.

Fabrication and optimization of chitosan-g-m-PEG-NH2 copolymer for advanced glioblastoma therapy using surface engineered lentinan loaded nanovesicles for nasal delivery

Glioblastoma multiforme (GBM) exhibits a high mortality with an incidence rate of 3-5 per 100,000 each year, which demands existence of newer approach for its treatment. The current study focuses on synthesis of novel lipidic nanovesicles (LNs) loaded with highly potent macromolecule Lentinan (LNT) and surface modified with methoxy poly (ethylene glycol; PEG) amine (m-PEG-NH2)-grafted-chitosan (CS) for intranasal delivery. The grafting procedure was optimized using Box Behnken design (BBD) to limit the use of organic solvents. The fabricated polymer showed enhanced aqueous solubility, biodegradability and mucoadhesion, resulting in higher nasal mucosa permeation (z = 53.52 μm). The presence of PEG enabled the sustained release of LNT till 48 h and assisted in achieving higher accumulation of LNT in CSF (41.7 ± 3.1 μg/mL) and a higher brain targeting potential of 96.3 ± 2.31 % (p < 0.05). In-vitro cellular studies showed the enhanced anti-GBM effect of LNT on U87 MG cells by reducing the cell viability (~2 times reduction in IC50 value) accompanied with large number of cells undergoing late apoptosis and death (p < 0.05) because of the higher cellular uptake (63.22 ± 3.01 ng/100 cells) of novel formulation. The copolymer comprising LNs were biocompatible, stable and can be used as an effective tool in the management of GBM.

Recent Progress in the Applications of Langmuir-Blodgett Film Technology

Langmuir-Blodgett (LB) film technology is an advanced technique for the preparation of ordered molecular ultra-thin films at the molecular level, which transfers a single layer of film from the air/water interface to a solid substrate for the controlled assembly of molecules. LB technology has continually evolved over the past century, revealing its potential applications across diverse fields. In this study, the latest research progress of LB film technology is reviewed, with emphasis on its latest applications in gas sensors, electrochemical devices, and bionic films. Additionally, this review evaluates the strengths and weaknesses of LB technology in the application processes and discusses the promising prospects for future application of LB technology.

Inhibition of the Naja naja venom toxicity by polymeric nanoparticles loaded with Leucas aspera methanolic extract

Background

Snakebite is a neglected tropical disease that affects millions of people worldwide. Developing effective treatments can make a significant contribution to global health efforts and public health initiatives. To reduce mortality due to snakebite, there is an immediate need to explore novel and effective treatment methodologies. In that context, nanoparticle-based drug delivery is gaining a lot of attention. Hydrophilic nanoparticles are suitable for the delivery of therapeutic peptides, proteins, and antigens.

Methods

The present investigation is aimed at evaluating the anti-ophidian potential of the methanolic extract of the ethno-medicinal herb Leucas aspera (Willd.) loaded within chitosan nanoparticles (CNP-LA), against the Indian cobra (Naja naja) venom enzymes. For this purpose, nanoparticles were prepared using the ionic gelation method to enhance the efficacy of the extract. The physicochemical and structural features of nanoparticles were investigated using dynamic light scattering (DLS), Fourier-transform Infrared (FTIR), field emission scanning electron microscopy (FE-SEM), and X-ray diffraction (XRD) techniques.

Results

It was found that CNP-LA has an average size of 260 nm with a polydispersity index of 0.132 (PDI) and zeta potential of 34.7 mV, with an encapsulation efficiency of 92.46%. The in vitro release study was performed at pH 5.0 and 7.4. Furthermore, in vitro studies indicated that CNP-LA inhibited the phospholipase A2, hemolytic, and caseinolytic activities of Naja naja venom with the percentage inhibition of 92.5%, 83.9%, and 94.5%, respectively.

Conclusion

This is the first report on the application of herbal methanolic extract loaded within chitosan nanoparticles for neutralizing snake venom enzymes with increased efficiency.

Enhanced curcumin transportation across epithelial barrier by mucus-permeable soy protein nanoparticles-mediated dual transcytosis pathways

Nanocarrier-delivered bioactive compounds are highly desirable for their improved stability and applicability, but their bioavailability is still limited due to the strong mucus and epithelial cell barriers. Herein, a series of self-assembled soy protein nanoparticles (SPNPs) with different mucus permeabilities were prepared and their delivery efficiency upon Curcumin (Cur) encapsulation was evaluated. Results demonstrated that the formed SPNPs-Cur exhibited high compatibility and cellular antioxidant accessibility. Besides, SPNPs enhanced the cellular uptake and transmembrane permeation of Cur, especially promoted the transportation of proto-Cur in addition to Cur metabolites. The SPNPs with the rapid mucus diffusion capacity presented more efficient transcytosis across the Caco-2 cell monolayer, which was mediated by a combination of paracellular and transcellular pathways. This work verified that mucus-permeable soy protein nanoparticles could be a promising delivery system for improving the bioavailability of bioactive compounds.

Development of mucoadhesive Timolol loaded chitosan-nanocomposite to treat glaucoma

Timolol Maleate is an aqueous soluble β-blocker antiglaucoma drug used to suppress intraocular pressure. Several commercially available ocular formulations are not effective in delivering to the target site due to their water-soluble property and low mucoadhesiveness. Hence, there is a requirement for a highly mucoadhesive drug-loaded nanocomposite to suppress intraocular pressure with enhanced bioavailability. Herein, we have prepared a mucoadhesive Timolol-loaded graphene quantum dot-chitosan-nanocomposite to treat glaucoma in response to lysozyme, secreted in the tear fluid. The as-prepared nanocomposite has been characterized through high resolution-transmission electron microscopic, X-ray photoelectron spectroscopic, X-ray diffraction, and Fourier transform infrared spectral studies. The nanocomposite showed 93.74 % encapsulation efficiency with a loading capacity of 7.73 %. Further, 89.26 %, 95.62 %, and 99.29 % of drug release were observed from the nanocomposite in the presence of 1, 1.5, and 2 mg/mL of lysozyme. The mucoadhesion property has been confirmed by the increment in the particle size, fluorescence spectral variations, and Fourier transform infrared spectroscopic studies in the presence of mucin nanoparticles of size 291 nm. Interestingly, mucoadhesion has been demonstrated by pointing to the quenching in the luminescence of mucin. Further, in vitro biocompatibility assay on human corneal epithelial cells showed ≥80 % cell viability. Hence, this study offers the utilization of naturally secreting enzymes for drug delivery applications instead of uncontrolled pH and temperature-triggered releases.

Preparation and Surface Characterization of Chitosan-Based Coatings for PET Materials

Poly(ethylene terephthalate)-PET-is one of the most frequently used polymers in biomedical applications. Due to chemical inertness, PET surface modification is necessary to gain specific properties, making the polymer biocompatible. The aim of this paper is to characterize the multi-component films containing chitosan (Ch), phospholipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), immunosuppressant cyclosporine A (CsA) and/or antioxidant lauryl gallate (LG) which can be utilized as a very attractive material for developing the PET coatings. Chitosan was employed owing to its antibacterial activity and also its ability to promote cell adhesion and proliferation favorable for tissue engineering and regeneration purposes. Moreover, the Ch film can be additionally modified with other substances of biological importance (DOPC, CsA and LG). The layers of varying compositions were prepared using the Langmuir-Blodgett (LB) technique on the air plasma-activated PET support. Then their nanostructure, molecular distribution, surface chemistry and wettability were determined by atomic force microscopy (AFM), time-of-flight secondary ion mass spectrometry (TOF-SIMS), X-ray photoelectron spectroscopy (XPS), contact angle (CA) measurements and the surface free energy and its components' determination, respectively. The obtained results show clearly the dependence of the surface properties of the films on the molar ratio of components and allow for a better understanding of the coating organization and mechanisms of interactions at the molecular level both inside the films and between the films and the polar/apolar liquids imitating the environment of different properties. The organized layers of this type can be helpful in gaining control over the surface properties of the biomaterial, thus getting rid of the limitations in favor of increased biocompatibility. This is a good basis for further investigations on the correlation of the immune system response to the presence of biomaterial and its physicochemical properties.

Salix subserrata Bark Extract-Loaded Chitosan Nanoparticles Attenuate Neurotoxicity Induced by Sodium Arsenate in Rats in Relation with HPLC-PDA-ESI-MS/MS Profile

Pollution is a worldwide environmental risk. Arsenic (As) is an environmental pollutant with a major health concern due to its toxic effects on multiple body organs, including the brain. Humans are exposed to As through eating contaminated food and water or via skin contact. Salix species (willow) are plants with medicinal efficacy. Salix subserrata Willd bark extract-loaded chitosan nanoparticles (SBE.CNPs) was formulated, characterized, and evaluated against As-induced neurotoxicity. The stem bark was selected for nanoparticle formulation based on HPLC-PDA-ESI-MS/MS profiling and in vitro antioxidant assessment using free radical scavenging activity. SBE.CNPs demonstrated an average un-hydrated diameter of 193.4 ± 24.5 nm and zeta potential of + 39.6 ± 0.4 mV with an encapsulation efficiency of 83.7 ± 4.3%. Compared to As-intoxicated rats, SBE.CNP-treated rats exhibited anxiolytic activity and memory-boosting as evidenced in open field test, light-dark activity box, and Y-maze. Also, it increased the antioxidant biomarkers, including superoxide dismutase and glutathione peroxidase associated with reducing the malondialdehyde levels and apoptotic activity. Besides this, SBE.CNPs maintained the brain architecture and downregulated both nuclear factor-kappa B and heme oxygenase-1 expression. These results suggest that SBE.CNP administration showed promising potent neuroprotective and antioxidative efficiencies against arsenic-induced oxidative threats.

Models using native tracheobronchial mucus in the context of pulmonary drug delivery research: Composition, structure and barrier properties

Mucus covers all wet epithelia and acts as a protective barrier. In the airways of the lungs, the viscoelastic mucus meshwork entraps and clears inhaled materials and efficiently removes them by mucociliary escalation. In addition to physical and chemical interaction mechanisms, the role of macromolecular glycoproteins (mucins) and antimicrobial constituents in innate immune defense are receiving increasing attention. Collectively, mucus displays a major barrier for inhaled aerosols, also including therapeutics. This review discusses the origin and composition of tracheobronchial mucus in relation to its (barrier) function, as well as some pathophysiological changes in the context of pulmonary diseases. Mucus models that contemplate key features such as elastic-dominant rheology, composition, filtering mechanisms and microbial interactions are critically reviewed in the context of health and disease considering different collection methods of native human pulmonary mucus. Finally, the prerequisites towards a standardization of mucus models in a regulatory context and their role in drug delivery research are addressed.

Cyclodextrin Stabilized Freeze-Dried Silica/Chitosan Nanoparticles for Improved Terconazole Ocular Bioavailability

This research assesses the beneficial effects of loading terconazole, a poorly water-soluble antifungal drug in silica/chitosan nanoparticles (SCNs) for ocular delivery. Nanoparticles were fabricated by the simple mixing of tetraethyl ortho silicate (TEOS) and chitosan HCl as sources of silica and nitrogen, respectively, along with alcoholic drug solution in different concentrations. Freeze-dried nanoparticles were fabricated using cyclodextrins as cryoprotectants. SCNs were assessed for their particle size, PDI, yield, drug loading and in vitro release studies. A 2³.3¹ full factorial experimental design was constructed to optimize the prepared SCNs. DSC, XRD, FTIR, in addition to morphological scanning were performed on the optimized nanoparticles followed by an investigation of their pharmacokinetic parameters after topical ocular application in male Albino rabbits. The results reveal that increasing the water content in the preparations causes an increase in the yield and size of nanoparticles. On the other hand, increasing the TEOS content in the preparations, caused a decrease in the yield and size of nanoparticles. The optimized formulation possessed excellent mucoadhesive properties with potential safety concerning the investigated rabbit eye tissues. The higher C_max and AUC_0–24 values coupled with a longer t_max value compared to the drug suspension in the rabbits’ eyes indicated the potential of SCNs as promising ocular carriers for poorly water-soluble drugs, such as terconazole.

Chitosan effects on monolayers of zwitterionic, anionic and a natural lipid extract from E. coli at physiological pH

Langmuir monolayers are used to simulate the biological membrane environment, acting as a mimetic system of the outer or the inner membrane leaflet. Herein, we analyze the interaction of membrane models with a partially N-acetylated chitosan (Ch35%) possessing a quasi-ideal random pattern of acetylation, full water solubility up to pH ≈ 8.5 and unusually high weight average molecular weight. Lipid monolayers containing dipalmitoyl phosphatidyl choline (DPPC), dipalmitoyl phosphatidyl ethalonamine (DPPE), dipalmitoyl phosphatidyl glycerol (DPPG) or E. coli total lipid extract were spread onto subphases buffered at pH 4.5 or 7.4. The incorporation of Ch35% chitosan caused monolayer expansion and a general trend of decreasing monolayer rigidity with Ch35% concentration. Due to its relatively high content of N-acetylglucosamine (GlcNAc) units, Ch35% interactions with negatively charged monolayers and with E. coli extract were weaker than those involving zwitterionic monolayers or lipid rafts. While the smaller interaction with negatively charged lipids was unexpected, this finding can be attributed to the degree of acetylation (35%) which imparts a small number of charged groups for Ch35% to interact. Chitosan properties are therefore determinant for interactions with model cell membranes, which explains the variability in chitosan bactericide activity in the literature. This is the first study on the effects from chitosans on realistic models of bacterial membranes under physiological pH.

Characteristic Evaluation of Gel Formulation Containing Niosomes of Melatonin or Its Derivative and Mucoadhesive Properties Using ATR-FTIR Spectroscopy

Chitosan or polyvinyl pyrrolidone (PVP) were used in combination with hydroxypropyl methylcellulose (HPMC) and poloxamer 407 (P407) as gelling agents for oral drug delivery. The performance interaction with mucin of chitosan-composed gel (F1) and PVP-composed gel (F2) was compared using attenuated total reflectance-Fourier-transform infrared (ATR-FTIR) spectroscopy at controlled temperatures of 25 and 37 °C for 1 and 5 min. F1 containing niosome-entrapped melatonin or its derivatives was investigated for mucoadhesive interaction on mucosa by ATR-FTIR spectroscopy under the same conditions. The results showed that F1-treated mucin gave a significantly lower amide I/amide II ratio than untreated mucin and F2-treated mucin did within 1 min, suggesting improved rapid affinity between mucin and chitosan. The spectra of mucosa treated with F1 incorporating niosomes of melatonin or its derivatives showed peak shifts at C=O (amide I), N-H (amide II), and carbohydrate regions and an associated decrease in the amide I/amide II ratio and increase in the carbohydrate/amide II ratio. These results indicated electrostatic interaction and hydrogen bonding between chitosan and mucin on the mucosa. In conclusion, the molecular interaction between gels and mucin/mucosa detected at amide I and amide II of proteins and the carbohydrate region could lead to an improved mucoadhesive property of the gel on the mucosa.

N-(2-hydroxy)-propyl-3-trimethylammonium, O-palmitoyl chitosan: Synthesis, physicochemical and biological properties

Two samples of N-(2-hydroxy)-propyl-3-trimethylammonium, O-palmitoyl chitosan (DPCat) with different average degrees of quaternization named as DPCat35 (DQ¯ = 35%) and DPCat80 (DQ¯ = 80%), were successfully synthesized by reacting glycidyltrimethylammonium chloride (GTMAC) with O-palmitoyl chitosan (DPCh) derivative (DS¯ = 12%). Such amphiphilic derivatives of chitosan were fully water-soluble at 1.0 < pH < 12.0 and showed significant electrostatic stability enhancement of a self-assembly micellar nanostructure (100-320 nm) due to its positively-charged out-layer. In vitro mucoadhesive and cytotoxicity essays toward healthy fibroblast cells (Balb/C 3T3 clone A31 cell), human prostate cancer (DU145) and liver cancer (HepG2/C3A) cell lines revealed that the biological properties of DPCat derivatives were strongly dependent on DQ¯. Additionally, DPCat35 had better interactions with the biological tissue and with mucin glycoproteins at pH 7.4 as well as exhibited potential to be used on the development of drug delivery systems for prostate and liver cancer treatment.

Thermosensitive hydrogels for vaginal delivery of secnidazole as an approach to overcome the systemic side-effects of oral preparations

Secnidazole (SEC) has been suggested as an alternative agent against Trichomonas vaginalis to overcome the adverse effects, antimicrobial resistance problems and poor adherence to the currently available therapy. Once no topical formulation may be found in the market until now, SEC was incorporated in thermosensitive bioadhesive systems to extend the contact time in the mucosa and to avoid a systemic drug disposition. Formulations containing 20% poloxamer 407, 1% poloxamer 188 and 1 or 2.5% chitosan showed suitable sol-gel transition temperature (> 30 °C), presenting a fast gelation time (100-115 s). Rheological, dynamic light scattering and infrared spectroscopy analysis suggested molecular interactions among polymers. Chitosan increased the mucoadhesion strength of the formulations. In addition, hydrogels showed a tendency to decrease the drug transport rate through mucosa when compared to the control. Mucin was also added onto mucosa for a more realistic simulation of permeability/retention. In the presence of this agent, hydrogels containing chitosan reduced the permeability/retention of the drug in approximately 2.0-fold when compared to the control. Therefore, the hydrogels presented suitable characteristics to remain in the vaginal environment, which would result in effective local treatment of trichomoniasis.

Characterisation of the Interaction among Oil-In-Water Nanocapsules and Mucin

Mucins are glycoproteins present in all mucosal surfaces and in secretions such as saliva. Mucins are involved in the mucoadhesion of nanodevices carrying bioactive molecules to their target sites in vivo. Oil-in-water nanocapsules (NCs) have been synthesised for carrying N,N'-(di-m-methylphenyl)urea (DMTU), a quorum-sensing inhibitor, to the oral cavity. DMTU-loaded NCs constitute an alternative for the treatment of plaque (bacterial biofilm). In this work, the stability of the NCs after their interaction with mucin is analysed. Mucin type III from Sigma-Aldrich has been used as the mucin model. Mucin and NCs were characterised by the multi-detection asymmetrical flow field-flow fractionation technique (AF4). Dynamic light scattering (DLS) and ζ-potential analyses were carried out to characterise the interaction between mucin and NCs. According to the results, loading DMTU changes the conformation of the NC. It was also found that the synergistic interaction between mucin and NCs was favoured within a specific range of the mucin:NC ratio within the first 24 h. Studies on the release of DMTU in vitro and the microbial activity of such NCs are ongoing in our lab.

Chemical and Microstructural Characterization of pH and [Ca2+] Dependent Sol-Gel Transitions in Mucin Biopolymer

Mucus is responsible for controlling transport and barrier function in biological systems, and its properties can be significantly affected by compositional and environmental changes. In this study, the impacts of pH and CaCl₂ were examined on the solution-to-gel transition of mucin, the primary structural component of mucus. Microscale structural changes were correlated with macroscale viscoelastic behavior as a function of pH and calcium addition using rheology, dynamic light scattering, zeta potential, surface tension, and FTIR spectroscopic characterization. Mucin solutions transitioned from solution to gel behavior between pH 4–5 and correspondingly displayed a more than ten-fold increase in viscoelastic moduli. Addition of CaCl₂ increased the sol-gel transition pH value to ca. 6, with a twofold increase in loss moduli at low frequencies and ten-fold increase in storage modulus. Changing the ionic conditions—specifically [H⁺] and [Ca²⁺] —modulated the sol-gel transition pH, isoelectric point, and viscoelastic properties due to reversible conformational changes with mucin forming a network structure via  non-covalent cross-links between mucin chains.

Interaction of chitosan derivatives with cell membrane models in a biologically relevant medium

HYPOTHESIS

The interaction of chitosan, a natural biopolymer with various biomedical applications, with lipid Langmuir films has been widely investigated as a simple model for cell membranes. However, to ensure polymer solubility, up to now only acidic subphases with pH significantly below biological fluids have been used. To increase the biological significance of these investigations, here we evaluated the effects of two chitosan derivatives (low molecular weight - CH, and positively charged - CH-P40) on phospholipid films (either zwitterionic DPPC or anionic DPPG) using phosphate buffered saline solutions (PBS) as a subphase.

EXPERIMENTS

Surface pressure - area (π-A) isotherms were used to evaluate the expansion and changes in film elasticity, while Sum-Frequency Generation (SFG) vibrational spectroscopy provided information about the chain conformation of lipids.

FINDINGS

It was found that chitosans caused a small expansion of the DPPC film by its insertion within the monolayer. In contrast, they distinctly expanded DPPG monolayers by both chitosan insertion within the lipid monolayer and by interacting with the anionic head group. Therefore, PBS buffer can be used as a subphase for more biologically relevant studies of chitosan interactions with Langmuir films, shedding light on why chitosan is antibacterial but not toxic to mammals, as the interaction mechanism depends on lipid headgroup charge.

Mucin Thin Layers: A Model for Mucus-Covered Tissues

The fate of macromolecules of biological or pharmacological interest that enter the mucus barrier is a current field of investigation. Studies of the interaction between the main constituent of mucus, mucins, and molecules involved in topical transmucoidal drug or gene delivery is a prerequisite for nanomedicine design. We studied the interaction of mucin with the bio-inspired arginine-derived amphoteric polymer d,l-ARGO7 by applying complementary techniques. Small angle X-ray scattering in bulk unveiled the formation of hundreds of nanometer-sized clusters, phase separated from the mucin mesh. Quartz microbalance with dissipation and neutron reflectometry measurements on thin mucin layers deposited on silica supports highlighted the occurrence of polymer interaction with mucin on the molecular scale. Rinsing procedures on both experimental set ups showed that interaction induces alteration of the deposited hydrogel. We succeeded in building up a new significant model for epithelial tissues covered by mucus, obtaining the deposition of a mucin layer 20 Å thick on the top of a glycolipid enriched phospholipid single membrane, suitable to be investigated by neutron reflectometry. The model is applicable to unveil the cross structural details of mucus-covered epithelia in interaction with macromolecules within the Å discreteness.

Interaction Between Chitosan and Mucin: Fundamentals and Applications

The term chitosan (CS) refers to a family of aminopolysaccharides derived from chitin. Among other properties, CS is nontoxic, mucoadhesive and can be used for load and transport drugs. Given these and other physicochemical and biological properties, CS is an optimal biopolymer for the development of transmucosal drug delivery systems, as well as for the treatment of pathologies related to mucosal dysfunctions. Mucins are glycoprotein macromolecules that are the major components of mucus overlaying epithelia. CS interacts with mucin and adsorbs on and changes the rheology of mucus. However, CS and mucins denote families of polymers/macromolecules with highly variable chemical structure, properties, and behavior. To date, their interactions at the molecular level have not been completely unraveled. Also, the properties of complexes composed of CS and mucin vary as a function of the sources and preparation of the polymers. As a consequence, the mucoadhesion and drug delivery properties of such complexes vary as well. The breadth of this review is on the molecular interactions between CS and mucin. In particular, in vitro and ex vivo characterization methods to investigate both the interactions at play during the formation of CS-mucin complexes, and the advances on the use of CS for transmucosal drug delivery are addressed.

The potential of mucoadhesive polymer in enhancing efficacy of direct immersion vaccination against Flavobacterium columnare infection in tilapia

Vaccination is the most effective approach for prevention of infectious diseases in aquaculture. Although immersion vaccination is more applicable compared to in-feed/oral administration and injection, this method suffers from low potency as the efficiency of uptake of antigens through mucosal membranes is limited. In this study, we have successfully developed a mucoadhesive vaccine delivery system to enhance the efficacy of direct immersion vaccination against Flavobacterium columnare, the causative agent of columnaris disease in red tilapia. A formalin-killed negatively charged, bacterial cell suspension was used to prepare a mucoadhesive vaccine by electrostatic coating with positively charged chitosan. Our results demonstrate that the chitosan-complexed vaccine greatly increases its mucoadhesiveness, thus increasing the chances of vaccine uptake by the gill mucosa and improving the protection obtained against columnaris infection. The surface charge of the chitosan-complexed vaccine was altered from anionic to cationic after chitosan modification. Tilapia were vaccinated with the prepared chitosan-complexed vaccine by immersion. The challenge test was then carried out 30 and 60 days post vaccination, which resulted in a high level of mortalities in the non-vaccinated and uncomplexed vaccine groups. A high relative percentage survival (RPS) of vaccinated fish was noted with the mucoadhesive vaccine. Our results indicated that the naked vaccine failed to protect the fish from columnaris infection, which is consistent with the mucoadhesive assays performed during the study showing that the naked vaccine was unable to bind to mucosal surfaces. This system is therefore an effective method for immersion vaccination in order to deliver the antigen preparation to the mucosal surface membrane of the fish.

Microfluidic Nanoassembly of Bioengineered Chitosan-Modified FcRn-Targeted Porous Silicon Nanoparticles @ Hypromellose Acetate Succinate for Oral Delivery of Antidiabetic Peptides

Microfluidics technology is emerging as a promising strategy in improving the oral delivery of proteins and peptides. Herein, a multistage drug delivery system is proposed as a step forward in the development of noninvasive therapies. Undecylenic acid-modified thermally hydrocarbonized porous silicon (UnPSi) nanoparticles (NPs) were functionalized with the Fc fragment of immunoglobulin G for targeting purposes. Glucagon-like peptide-1 (GLP-1) was loaded into the NPs as a model antidiabetic drug. Fc-UnPSi NPs were coated with mucoadhesive chitosan and ultimately entrapped into a polymeric matrix with pH-responsive properties by microfluidic nanoprecipitation. The final formulation showed a controlled and narrow size distribution. The pH-responsive matrix remained intact in acidic conditions, dissolving only in intestinal pH, resulting in a sustained release of the payload. The NPs presented high cytocompatibility and increased levels of interaction with intestinal cells when functionalized with the Fc fragment, which was supported by the validation of the Fc-fragment integrity after conjugation to the NPs. Finally, the Fc-conjugated NPs showed augmented GLP-1 permeability in an intestinal in vitro model. These results highlight the potential of microfluidics as an advanced technique for the preparation of multistage platforms for oral administration. Moreover, this study provides new insights on the potential of the Fc receptor transcytotic capacity for the development of targeted therapies.

Glycol chitosan functionalized asenapine nanostructured lipid carriers for targeted brain delivery: Pharmacokinetic and teratogenic assessment

Blood brain barrier (BBB) is a complex, tight barrier between endothelial cells of cerebral blood vessels. It acts as a physical barrier and provides access to only those moieties which are necessary for proper brain functioning. However, this selective prudence also acts as a hindrance in therapeutic targeting of brain necessitating pharmaceutical intervention. Intranasal drug delivery is one such approach which we have exploited here for targeted brain delivery of asenapine by glycol chitosan coated nanostructured lipid carrier (GC-ANLC). The best formulation was characterized for particle size (184.2±5.59nm), zeta potential (18.83±1.18mV), entrapment efficiency (83.52±2.59%) and surface morphology (spherical and smooth). In-vitro drug-release study showed that Higuchi model (r²=0.9938, AIC=52.94) dictated asenapine release from GC-ANLC. Cell compatibility study suggested biocompatibility of GC-ANLC with A549 cell line as well as nasal epithelial cell membrane. After intranasal delivery, Charles-Foster rats demonstrated approximately 2.3 and 4 fold higher systemic and brain bioavailability of GC-ANLC compared to asenapine solution (ASM). Embryo fetal toxicity study was further conducted to investigate the teratogenic effect of GC-ANLC. In conclusion, prepared GC-ANLC could be used as a promising drug carrier for delivery of asenapine via intranasal route with better pharmacokinetic and safety profile.

Accumulation of phosphatidylcholine on gut mucosal surface is not dominated by electrostatic interactions

The accumulation of phosphatidylcholine (PC) in the intestinal mucus layer is crucial for the protection of colon epithelia from the bacterial attack. It has been reported that the depletion of PC is a distinct feature of ulcerative colitis. Here we addressed the question how PC interacts with its binding proteins, the mucins, which may establish the hydrophobic barrier against colonic microbiota. In the first step, the interactions of dioleoylphosphatidylcholine (DOPC) with two mucin preparations from porcine stomach, have been studied using dynamic light scattering, zeta potential measurement, and Langmuir isotherms, suggesting that mucin binds to the surface of DOPC vesicles. The enthalpy of mucin-PC interaction could be determined by isothermal titration calorimetry. The high affinity to PC found for both mucin types seems reasonable, as they mainly consist of mucin 2, a major constituent of the flowing mucus. Moreover, by the systematic variation of net charges, we concluded that the zwitterionic DOPC has the strongest binding affinity that cannot be explained within the electrostatic interactions between charged molecules.

The properties of the mucus barrier, a unique gel--how can nanoparticles cross it?

The key criterion for a nanoparticle drug-delivery system is the ability to produce substantial bioavailability without damaging the physiological protective mechanisms. The main area for drug delivery is the aerodigestive tract. All epithelial surfaces have a membrane-bound layer and in the lung this layer is surmounted by a gel layer. In the gastrointestinal tract the membrane-bound mucin layer is covered by a mucus bilayer. The pore sizes of mucus gels are around 100 to 200 nm. Consequently, only nanoparticles in this size range could potentially penetrate without modification of these layers. To study nanoparticle permeation with results that pertain to in vivo conditions, native mucus mucin preparations must be used. Strategies to increase pores in mucus gels are discussed herein.

Mucoadhesive nanostructured lipid carriers (NLCs) as potential carriers for improving oral delivery of curcumin

PURPOSE

To examine effects of polymer types on the mucoadhesive properties of polymer-coated nanostructured lipid carriers (NLCs). Experiment: Curcumin-loaded NLCs were prepared using a warm microemulsion technique followed by coating particle surface with mucoadhesive polymers: polyethylene glycol400 (PEG400), polyvinyl alcohol (PVA), and chitosan (CS). The physicochemical properties and entrapment efficacy were examined. In vitro mucoadhesive studies were assessed by wash-off test. In addition, the stability of mucoadhesive NLCs in gastrointestinal fluids and the pattern of drug release were also investigated.

FINDINGS

The obtained nanoparticles showed spherical shape with size ranging between 200 nm and 500 nm and zeta potential between -37 and -9 mV depending on the type of polymer coating. Up to 80% drug entrapment efficacy was observed. In vitro mucoadhesive studies revealed that PEG-NLCs and PVA-NLCs were adhered strongly to freshly porcine intestinal mucosa, more than 2-fold mucoadhesive compared to CS-NLCs and uncoated-NLCs. The particle size of all polymer-coated NLCs could be maintained in both simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) suggesting good physical stability in physiological fluid. In contrast, uncoated-NLCs showed particle aggregation in SGF. In vitro dissolution studies revealed a fast release characteristic.

Sulfonate-modified phenylboronic acid-rich nanoparticles as a novel mucoadhesive drug delivery system for vaginal administration of protein therapeutics: improved stability, mucin-dependent release and effective intravaginal placement

Effective interaction between mucoadhesive drug delivery systems and mucin is the basis of effective local placement of drugs to play its therapeutic role after mucosal administration including vaginal use, which especially requires prolonged drug presence for the treatment of gynecological infectious diseases. Our previous report on phenylboronic acid-rich nanoparticles (PBNPs) demonstrated their strong interaction with mucin and mucin-sensitive release profiles of the model protein therapeutics interferon (IFN) in vitro, but their poor stability and obvious tendency to aggregate over time severely limited future application. In this study, sulfonate-modified PBNPs (PBNP-S) were designed as a stable mucoadhesive drug delivery system where the negative charges conferred by sulfonate groups prevented aggregation of nanoparticles and the phenylboronic acid groups ensured effective interaction with mucin over a wide pH range. Results suggested that PBNP-S were of spherical morphology with narrow size distribution (123.5 nm, polydispersity index 0.050), good stability over a wide pH range and 3-month storage and considerable in vitro mucoadhesion capability at vaginal pH as shown by mucin adsorption determination. IFN could be loaded to PBNP-S by physical adsorption with high encapsulation efficiency and released in a mucin-dependent manner in vitro. In vivo near-infrared fluorescent whole animal imaging and quantitative vaginal lavage followed by enzyme-linked immunosorbent assay (ELISA) assay of IFN demonstrated that PBNP-S could stay in the vagina and maintain intravaginal IFN level for much longer time than IFN solution (24 hours vs several hours) without obvious histological irritation to vaginal mucosa after vaginal administration to mice. In summary, good stability, easy loading and controllable release of protein therapeutics, in vitro and in vivo mucoadhesive properties and local safety of PBNP-S suggested it as a promising nanoscale mucoadhesive drug delivery system for vaginal administration of protein therapeutics.

Adsorption according to the Langmuir–Freundlich model is the detection mechanism of the antigen p53 for early diagnosis of cancer

The Langmuir–Freundlich model is used to explain the adsorption of the p53 biomarker onto an immunosensor for early detection of cancer.

Vibrational spectroscopy for probing molecular-level interactions in organic films mimicking biointerfaces

Investigation into nanostructured organic films has served many purposes, including the design of functionalized surfaces that may be applied in biomedical devices and tissue engineering and for studying physiological processes depending on the interaction with cell membranes. Of particular relevance are Langmuir monolayers, Langmuir-Blodgett (LB) and layer-by-layer (LbL) films used to simulate biological interfaces. In this review, we shall focus on the use of vibrational spectroscopy methods to probe molecular-level interactions at biomimetic interfaces, with special emphasis on three surface-specific techniques, namely sum frequency generation (SFG), polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface-enhanced Raman scattering (SERS). The two types of systems selected for exemplifying the potential of the methods are the cell membrane models and the functionalized surfaces with biomolecules. Examples will be given on how SFG and PM-IRRAS can be combined to determine the effects from biomolecules on cell membrane models, which include determination of the orientation and preservation of secondary structure. Crucial information for the action of biomolecules on model membranes has also been obtained with PM-IRRAS, as is the case of chitosan removing proteins from the membrane. SERS will be shown as promising for enabling detection limits down to the single-molecule level. The strengths and limitations of these methods will also be discussed, in addition to the prospects for the near future.