Effects of emulsifier hydrophile-lipophile balance and emulsifier concentration on the distributions of gallic acid, propyl gallate, and α-tocopherol in corn oil emulsions

Encapsulation of Black Rice Bran Extract in a Stable Nanoemulsion: Effects of Thermal Treatment, Storage Conditions, and In Vitro Digestion

This study aimed to improve the dispersibility of phenolic compounds from black rice bran through the encapsulation process within nanoemulsion. The study focused on assessing the stability of the nanoemulsions, which were prepared using a combination of surfactants with distinct hydrophilic-lipophilic balance (HLB) values and sunflower oil under different thermal treatments and storage conditions. The study revealed a significant correlation between the mixed surfactant HLB value and the nanoemulsions properties, including average particle size, polydispersity index (PDI), and ζ-potential. Specifically, an increase in the HLB value was associated with a decrease in the initial average particle size. The encapsulated polyphenols exhibited remarkable stability over a storage period of up to 30 days at different temperatures with no significant changes observed in particle size or PDI. The study also investigated the impact of different ionic strengths (0.2, 0.5, and 1.00 mol L-1 NaCl) on the physical stability and antioxidant black rice bran extract nanoemulsion, and the results revealed that adding NaCl influenced the particle size and surface charge of the nanoemulsions. Total phenolic content and DPPH results demonstrated a significant impact of salt concentration on antioxidant properties, with varying trends observed among the HLB formulations. Furthermore, the behavior of the encapsulated extracts during digestion was examined, and their antioxidant activity was evaluated.

The effect of α-tocopherol incorporated into different carriers on the oxidative stability of oil in water (O/W) emulsions

The effect of the antioxidant activity of α-tocopherol incorporated into different carriers on the oxidative stability of oil in water emulsion was investigated. The antioxidant activity of free and encapsulated α-tocopherol was measured in a 2,2-diphenyl-1-picrylhydrazyl reaction. Apart from α-tocopherol micelles, the samples showed similar antioxidant activity. The number of primary oxidation products in the emulsion with tocopherol liposomes and niosomes was lower than in the emulsion with micelles. During storage, the lipid peroxides gradually increased, whereas in emulsion with no α-tocopherol carriers added they remained constant. The content of the conjugated dienes first increased, and after 14 days at the end of testing time it remained stable in both types of emulsions. Our results might suggest that α-tocopherol when encapsulated into carriers exhibits lower antioxidant activity. The results obtained could be due to the better solubility of α-tocopherol in lipid droplets and thus the lower availability for the interfacial region, which is thought to be the place of the most pronounced lipid oxidation.

Efficiency of δ-Tocopherol in Inhibiting Lipid Oxidation in Emulsions: Effects of Surfactant Charge and of Surfactant Concentration

Charged interfaces may play an important role in the fate of chemical reactions. Alterations in, for instance, the interfacial acidity of emulsions induced by the charge of the surfactant head group and associated counterions may change the ionization status of antioxidants, modifying their effective concentrations. The chemical reactivity between interfacial reactants and charged species of opposite charge (protons, metallic ions, etc.) is usually interpreted in terms of pseudophase ion-exchange models, treating the distribution of charged species in terms of partitioning and ion exchange. Here, we focus on analyzing the effects of charged interfaces on the oxidative stability of soybean oil-in-water (o/w) emulsions prepared with anionic (sodium dodecyl sulfate, SDS), cationic (cetyltrimethylammonium bromide, CTAB) and neutral (Tween 20) surfactants, and some of their mixtures, in the presence and absence of δ-tocopherol (δ-TOC). We have also determined the effective concentrations of δ-TOC in the oil, interfacial and aqueous regions of the intact emulsions. In the absence of δ-TOC, the relative oxidative stability order was CTAB < TW20 ~ TW20/CTAB < SDS. Surprisingly, upon the addition of δ-TOC, the relative order was SDS ≈ TW20 << TW20/CTAB < CTAB. These apparently surprising results can be rationalized in terms of the nice correlation that exists between the relative oxidative stability and the effective interfacial concentrations of δ-TOC in the various emulsions. The results emphasize the importance of considering the effective interfacial concentrations of antioxidants in interpreting their relative efficiency in emulsions.

Pharmacokinetic and toxicological overview of propyl gallate food additive

The progressive use of food additives in "ultra-processed" food has increased attention to them. Propyl gallate (PG) is an essential synthetic preservative that commonly used in food, cosmetics, and pharmacies as an antioxidant. This study aimed to outline the existing evidence on the toxicological studies of PG including its physicochemical properties, metabolism, and pharmacokinetics effects. The methods include updated searches for the relevant databases. The EFSA has evaluated the use of PG in food industry. It establishes an acceptable daily intake (ADI) of 0.5 mg/kg bw per day. Based on exposure assessment, it can be concluded that at the current level of use, PG is not of safety concern.

Distributions of α- and δ-TOCopherol in Intact Olive and Soybean Oil-in-Water Emulsions at Various Acidities: A Test of the Sensitivity of the Pseudophase Kinetic Model

During the last years, the formalism of the pseudophase kinetic model (PKM) has been successfully applied to determine the distributions of antioxidants and their effective interfacial concentrations, and to assess the relative importance of emulsion and antioxidant properties (oil and surfactant nature, temperature, acidity, chemical structure, hydrophilic-liphophilic balance (HLB), etc.) on their efficiency in intact lipid-based emulsions. The PKM permits separating the contributions of the medium and of the concentration to the overall rate of the reaction. In this paper, we report the results of a specifically designed experiment to further test the suitability of the PKM to evaluate the distributions of antioxidants among the various regions of intact lipid-based emulsions and provide insights into their chemical reactivity in multiphasic systems. For this purpose, we employed the antioxidants α- and δ-TOCopherol (α- and δ-TOC, respectively) and determined, at different acidities well below their pKa, the interfacial rate constants k_I for the reaction between 16-ArN₂⁺ and α- and δ-TOC, and the antioxidant distributions in intact emulsions prepared with olive and soybean oils. Results show that the effective interfacial concentration of δ-TOC is higher than that of α-TOC in 1:9 (v/v) soybean and 1:9 olive oil emulsions. The effective interfacial concentrations of tocopherols are much higher (15-96-fold) than the stoichiometric concentrations, as the effective interfacial concentrations of both δ-TOC and α-TOC in soybean oil emulsions are higher (2-fold) than those in olive oil emulsions. Overall, the results demonstrate that the PKM grants an effective separation of the medium and concentration effects, demonstrating that the PKM constitutes a powerful non-destructive tool to determine antioxidant concentrations in intact emulsions and to assess the effects of various factors affecting them.

Biochemistry of Antioxidants: Mechanisms and Pharmaceutical Applications

Natural antioxidants from fruits and vegetables, meats, eggs and fish protect cells from the damage caused by free radicals. They are widely used to reduce food loss and waste, minimizing lipid oxidation, as well as for their effects on health through pharmaceutical preparations. In fact, the use of natural antioxidants is among the main efforts made to relieve the pressure on natural resources and to move towards more sustainable food and pharmaceutical systems. Alternative food waste management approaches include the valorization of by-products as a source of phenolic compounds for functional food formulations. In this review, we will deal with the chemistry of antioxidants, including their molecular structures and reaction mechanisms. The biochemical aspects will also be reviewed, including the effects of acidity and temperature on their partitioning in binary and multiphasic systems. The poor bioavailability of antioxidants remains a huge constraint for clinical applications, and we will briefly describe some delivery systems that provide for enhanced pharmacological action of antioxidants via drug targeting and increased bioavailability. The pharmacological activity of antioxidants can be improved by designing nanotechnology-based formulations, and recent nanoformulations include nanoparticles, polymeric micelles, liposomes/proliposomes, phytosomes and solid lipid nanoparticles, all showing promising outcomes in improving the efficiency and bioavailability of antioxidants. Finally, an overview of the pharmacological effects, therapeutic properties and future choice of antioxidants will be incorporated.

Tocopherols as antioxidants in lipid-based systems: The combination of chemical and physicochemical interactions determines their efficiency

Lipid oxidation is a major concern in the food, cosmetic, and pharmaceutical sectors. The degradation of unsaturated lipids affects the nutritional, physicochemical, and organoleptic properties of products and can lead to off-flavors and to the formation of potentially harmful oxidation compounds. To prevent or slow down lipid oxidation, different antioxidant additives are used alone or in combination to achieve the best possible efficiency with the minimum possible quantities. In manufactured products, that is, heterogeneous systems containing lipids as emulsions or bulk phase, the efficiency of an antioxidant is determined not only by its chemical reactivity, but also by its physical properties and its interaction with other compounds present in the products. The antioxidants most widely used on the industrial scale are probably tocopherols, either as natural extracts or pure synthetic molecules. Considerable research has been conducted on their antioxidant activity, but results regarding their efficiency are contradictory. Here, we review the known mechanisms behind the antioxidant activity of tocopherols and discuss the chemical and physical features that determine their efficacy. We first describe their chemical reactivity linked with the main factors that modulate it between efficient antioxidant capacity and potential prooxidant effects. We then describe their chemical interactions with other molecules (phenolic compounds, metals, vitamin C, carotenes, proteins, and phospholipids) that have potential additive, synergistic, or antagonist effects. Finally, we discuss other physical parameters that influence their activity in complex systems including their specific interactions with surfactants in emulsions and their behavior in the presence of association colloids in bulk oils.

Lipid oxidation in emulsions and bulk oils: a review of the importance of micelles

Lipid oxidation is a major cause of quality deterioration in food products. In these foods, lipids are often present in a bulk or in emulsified forms. In both systems, the rate, extent and pathway of oxidation are highly dependent on the presence of colloidal structures and interfaces because these are the locations where oxidation normally occurs. In bulk oils, reverse micelles (association colloids) are present and are believed to play a crucial role on lipid oxidation. Conversely, in emulsions, surfactant micelles are present that also play a major role in lipid oxidation pathways. After a brief description of lipid oxidation and antioxidants mechanisms, this review discusses the current understanding of the influence of micellar structures on lipid oxidation. In particular, is discussed the major impact of the presence of micelles in emulsions, or reverse micelles (association colloids) in bulk oil on the oxidative stability of both systems. Indeed, both micelles in emulsions and associate colloids in bulk oils are discussed in this review as nanoscale structures that can serve as reservoirs of antioxidants and pro-oxidants and are involved in their transport within the concerned system. Their role as nanoreactors where lipid oxidation reactions occur is also commented.

Effects of Surfactant Volume Fraction on the Antioxidant Efficiency and on The Interfacial Concentrations of Octyl and Tetradecyl p-Coumarates in Corn Oil-in-Water Emulsions

Surfactants have been used for decades in the food industry for the preparation of lipid-based emulsified food stuffs. They play two main roles in the emulsification processes: first they decrease the interfacial tension between the oil and water, facilitating droplet deformation and rupture; second, they reduce droplet coalescence by forming steric barriers. However, addition of surfactants to binary oil-water mixtures also brings up the formation of three-dimensional interfacial layers, surrounding each emulsion droplet, that significantly alter chemical reactivity. This is the case, for instance, in the inhibition reaction between antioxidants and the lipid radicals formed in the course of the spontaneous oxidation reaction of unsaturated lipids, which are commonly employed in the preparation of food-grade emulsions. The rate of the inhibition reaction depends on the effective concentrations of antioxidants, which are mostly controlled by the amount of surfactant employed in the preparation of the emulsion. In this work, we analyze the effects of the surfactant Tween 20 on the oxidative stability and on the effective concentrations of two model antioxidants derived from cinnamic acid, determining their interfacial concentrations in the intact emulsions to avoid disrupting the existing equilibria and biasing results. For this purpose, a recently developed methodology was employed, and experimental results were interpreted on the grounds of a pseudophase kinetic model.

Modeling Chemical Reactivity at the Interfaces of Emulsions: Effects of Partitioning and Temperature

Bulk phase chemistry is hardly ever a reasonable approximation to interpret chemical reactivity in compartmentalized systems, because multiphasic systems may alter the course of chemical reactions by modifying the local concentrations and orientations of reactants and by modifying their physical properties (acid-base equilibria, redox potentials, etc.), making them-or inducing them-to react in a selective manner. Exploiting multiphasic systems as beneficial reaction media requires an understanding of their effects on chemical reactivity. Chemical reactions in multiphasic systems follow the same laws as in bulk solution, and the measured or observed rate constant of bimolecular reactions can be expressed, under dynamic equilibrium conditions, in terms of the product of the rate constant and of the concentrations of reactants. In emulsions, reactants distribute between the oil, water, and interfacial regions according to their polarity. However, determining the distributions of reactive components in intact emulsions is arduous because it is physically impossible to separate the interfacial region from the oil and aqueous ones without disrupting the existing equilibria and, therefore, need to be determined in the intact emulsions. The challenge is, thus, to develop models to correctly interpret chemical reactivity. Here, we will review the application of the pseudophase kinetic model to emulsions, which allows us to model chemical reactivity under a variety of experimental conditions and, by carrying out an appropriate kinetic analysis, will provide important kineticparameters.

A comprehensive review on polarity, partitioning, and interactions of phenolic antioxidants at oil-water interface of food emulsions

There has been a growing interest in developing effective strategies to inhibit lipid oxidation in emulsified food products by utilization of natural phenolic antioxidants owing to their growing popularity over the past decades. However, due to the complexity of emulsified systems, the inhibition mechanism of phenolic antioxidants against lipid oxidation is rather complicated and not yet fully understood. In order to highlight the importance of polarity of phenolic antioxidants in emulsified systems according to the polar paradox, this review covers the recent progress on chemical, enzymatic, and chemoenzymatic lipophilization techniques used to modify the polarity of antioxidants. The partitioning behavior of phenolic antioxidants at the oil-water interface, which can be influenced by the presence of synthetic surfactants and/or antioxidant emulsifiers (e.g., polysaccharides, proteins, and phospholipids), is discussed. In addition, the emerging phenolic antioxidants among phenolic acids, flavonoids, tocopherols, and stilbenes applied in food emulsions are elaborated. As well, the interactions of polar-nonpolar antioxidants are stressed as a promising strategy to induce synergistic interactions at oil-water interface for improved oxidative stability of emulsions.

Comparison of antioxidant activities of selected phenolic compounds in O/W emulsions and bulk oil

Antioxidant activities of 1-o-galloylglycerol (GG), propyl gallate, rosmarinic acid (RA), tocopherols (TOC), and 1:1 combinations of GG/RA and GG/TOC were evaluated using in vitro assays including 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS⁺), and ferric reducing antioxidant power (FRAP). Soybean oil stripped of TOC was utilized as bulk oil and as the oil phase in O/W emulsions for accelerated oxidation test with the selected phenolic compounds. Efficacies of antioxidants were evaluated by monitoring total oxidation (TOTOX) values and fatty acid profiles of oil and O/W samples during the accelerated oxidation. In bulk oil, GG outperformed other singular antioxidants, preventing 39.04% of oxidation for ω-3 fatty acids with a TOTOX value of 166.68. In emulsions, TOC outperformed other singular antioxidants, preventing 38.04% of oxidation with a TOTOX value of 196.72. Considering the polarities of the antioxidants and our testing systems, these results provide supporting evidence for the polar paradox theory.

Interfacial Concentrations of Hydroxytyrosol Derivatives in Fish Oil-in-Water Emulsions and Nanoemulsions and Its Influence on Their Lipid Oxidation: Droplet Size Effects

Reports on the effect of droplet size on the oxidative stability of emulsions and nanoemulsions are scarce in the literature and frequently contradictory. Here, we have employed a set of hydroxytyrosol (HT) esters of different hydrophobicity and fish oil-in-water emulsified systems containing droplets of different sizes to evaluate the effect of the droplet size, surfactant, (Φ_I) and oil (Φ_O) volume fractions on their oxidative stability. To quantitatively unravel the observed findings, we employed a well-established pseudophase kinetic model to determine the distribution and interfacial concentrations of the antioxidants (AOs) in the intact emulsions and nanoemulsions. Results show that there is a direct correlation between antioxidant efficiency and the concentration of the AOs in the interfacial region, which is much higher (20–200 fold) than the stoichiometric one. In both emulsified systems, the highest interfacial concentration and the highest antioxidant efficiency was found for hydroxytyrosol octanoate. Results clearly show that the principal parameter controlling the partitioning of antioxidants is the surfactant volume fraction, Φ_I, followed by the O/W ratio; meanwhile, the droplet size has no influence on their interfacial concentrations and, therefore, on their antioxidant efficiency. Moreover, no correlation was seen between droplet size and oxidative stability of both emulsions and nanoemulsions.

A new family of hydroxytyrosol phenolipids for the antioxidant protection of liposomal systems

Hydroxytyrosol (HT) is a well-known olive oil polyphenol for its high antioxidant capacity and important cardio and neuroprotective effects. However, its use in lipidic systems is limited, due to its hydrophilic character. In this study, we approach the particular structure of xanthophylls and synthetize HT esters specially designed for the protection of liposomal systems. These HT esters contain two polyphenolic moieties separated by a lipophilic alkyl spacer of different length (12, 16 or 22 carbons). To evaluate the antioxidant activity of these compounds against the 2,2'-azobis(2-amidinopropane) hydrochloride induced oxidation, soybean phospholipid liposomes were used. Fluorescence quenching studies were used to assess the insertion of the compounds in the liposomes. The synthetized HT derivatives were able to protect liposomes from induced oxidation when added to the suspensions. The rank of activity was severely influenced by the alkyl chain length of the spacer molecule, being the C12 derivative the most active antioxidant, with an increase in the oxidative stability of liposomes of 2.2 times when compared with the control. The incorporation of compounds during liposome preparation improved the antioxidant capacity of all HT derivatives by about 2.8 times, when compared to the control. This is probably due to a similar transmembrane position with both polyphenolic rings located at the phospholipid polar heads. The synthesis of bis-ester derivatives seems to be a promising strategy to fine-tune antioxidant molecules at biomembranes, thus increasing the oxidative stability of liposomal systems by improving the antioxidant activity of hydrophilic phenolic compounds with high free radical scavenging activity.

Evaluating drug distribution and release in ophthalmic emulsions: Impact of release conditions

The purpose of this study is to investigate the process of drug distribution and mechanism of drug release of ophthalmic emulsions in the context of factors associated with the drug release. Cyclosporine and difluprednate emulsions were chosen as model systems. A kinetic method was used to quantitatively evaluate the drug distribution within a simplified biphasic (emulsion) system. The impacts of release associated factors were investigated, including the amount of sodium dodecyl sulfate (SDS), ethanol, and ionic strength in the release medium as well as the temperature. SDS and ethanol were found to significantly enhance both rate and extent of drug diffusion from oil to aqueous phase for both cyclosporine and difluprednate emulsions. The ionic strength was found to decrease the rate and extent of cyclosporine transfer from oil to aqueous phase but had little impact on the transfer of difluprednate between phases. Diffusion of cyclosporine to aqueous phase exhibited a decreasing trend with increasing temperature due to its atypical temperature dependent solubility in water. Based on our previous method to investigate the impact of formulation variables on drug diffusion and the findings in the current study, a biphasic release model for emulsions is proposed and discussed. Lastly, the underlying relationship of three key quality attributes (i.e., globule size distribution, drug distribution, and release characteristics) and their effect on product quality and performance were discussed. This study provides a fundamental insight into the drug distribution and release in complex emulsion systems. It also elucidates the critical variables for the development of in vitro release method to support regulatory assessment of ophthalmic emulsions and formulation development.

Behavior of Hexanal, (E)-Hex-2-enal, 4-Hydroxyhex-2-enal, and 4-Hydroxynon-2-enal in Oil-in-Water Emulsions

The reactivity of hexanal, (E)-hex-2-enal, 4-hydroxyhex-2-enal, and 4-hydroxynon-2-enal in oil-in-water emulsions and their respective compartments, in the presence and absence of protein, was studied at 40 °C. In aqueous buffer, hexanal oxidized to hexanoic acid. In the presence of protein, an additional loss occurred, presumably as a result of adduct formation with cysteine. Similarly, (E)-hex-2-enal oxidized to (E)-hex-2-enoic acid in aqueous buffer, and the results suggested that this acid is also able to form adducts with proteins. 4-Hydroxyalk-2-enals showed the highest reactivity in all models evaluated. Especially in protein-containing systems, they were not detectable anymore or their initial concentration was seriously reduced. 4-Hydroxynon-2-enal was the most reactive of the substances studied. The reactivity of the aldehydes was influenced by their partition within emulsions, which was remarkably not correlated with their hydrophobicity. These findings need to be considered when using these aldehydes as lipid oxidation markers in foods.

Roles and action mechanisms of herbs added to the emulsion on its lipid oxidation

Quality of food emulsions is mainly determined by their physicochemical stability such as lipid oxidation, and herbs as antioxidative food materials are added to improve their quality and shelf-life. Despite the extensive researches, the chemistry and implications of herb addition in the lipid oxidation of emulsions are still confusing. This review intended to provide the information on the roles and action mechanisms of herbs in the lipid oxidation of food emulsions, with focuses on polyphenols. Polyphenols act as antioxidants mainly via reactive oxygen species scavenging and metal chelating; however, their oxidation products and reducing capacity to more reactive metal ions increase the lipid oxidation. Factors such as structure, concentration, and distribution determine their anti- or prooxidant role. Interactions, synergism and antagonism, among polyphenol compounds and the effects of tocopherols derived from oil on the antioxidant activity of herbs were also described with the involving action mechanisms.

A simple and effective strategy to enhance the stability and solid-liquid interfacial interaction of an emulsion by the interfacial dilational rheological properties

The development of an emulsion is an important challenge in many fields, such as agrochemicals, pharmaceutics, paints, cosmetics, inkjet printing, and food science. However, the traditional strategies that refer to the empirical value and complex secondary additives cannot reflect the influence of the structure, content, compound, and adsorption of emulsifiers. Here, we propose a simple and effective strategy to develop the emulsion, wherein the emulsifiers are chosen based on the dilational rheological properties of the interfacial films at the molecular level. The dilational rheological properties of polyoxyethylene (80) castor oil (EL-80), sorbitan monostearate (Span 60), and their emulsions were explored by the oscillating drop method. Based on the dilational rheological properties, the emulsions were prepared by the phase inversion emulsification technique. The results showed that the emulsion was stable and realized effective solid-liquid interfacial interaction, which was attributed to the large dilational modulus (intermolecular interaction) at the oil/water interface and loss modulus (molecular diffusion exchange) at the air/water interface. These factors reduced the Ostwald ripening and coalescence, and finally increased the spreading diameter. Additionally, the prochloraz 25% emulsion in water (EW) and difenoconazole 20% EW were developed to verify the feasibility of the strategy. Therefore, this research advances the understanding of an emulsion by interfacial dilational rheological properties, which can provide a simple and effective strategy to develop a stable emulsion and achieve an effective solid-liquid interfacial interaction of the emulsion.

Influence of AO chain length, droplet size and oil to water ratio on the distribution and on the activity of gallates in fish oil-in-water emulsified systems: Emulsion and nanoemulsion comparison

The distribution of a homologous series of polyphenol derivatives of increasing lipophilicity has been determined in fish oil-in-water emulsions and nanoemulsions by the pseudophase model. One of the hypotheses on which the pseudophase model is based, is that its application is independent of the size of emulsion droplets. In agreement with our hypothesis, results showed that the smaller droplet size found in nanoemulsions does not affect partition constants of gallic acid (GA) and its esters. The antioxidant efficiency of GA and gallates in the emulsified systems used, correlated positively with the concentration of antioxidant at the interfacial region. The increase in the oil/water ratio increased the overall oxidative stability of emulsions but decreased the antioxidant efficiency of the more lipophilic derivatives. This can be assigned to the fact that, increasing the oil phase volume, the interfacial concentration decreased for the more lipophilic antioxidants.

Enzymatic glycerolysis-interesterification of palm stearin-olein blend for synthesis structured lipid containing high mono- and diacylglycerol

The objective of this research was to evaluate enzymatic glycerolysis-interesterification to synthesize structured lipids (SLs) containing high monoacylglycerol (MAG) and diacylglycerol (DAG) from a palm stearin-olein blend (PS-PO blend). The results showed that the optimum conditions for the solvent to fat ratio, glycerol to fat ratio, and enzyme concentration were 2:1 (v/w), 1.5:1, and 15% (w/w), respectively. The conversion rate of MAG and DAG decreased at a high glycerol to fat ratio, low solvent to fat ratio, and high enzyme concentration due to an increase in viscosity and low agitation effectiveness. The emulsion capacity and stability of the SLs were 60.19% and 96.80%, respectively. The hardness of the SLs increased about 3.1-fold. The MAG, DAG, and triacylglycerol conversion rates were 0.45, 0.48, and 1.02%/h, respectively. Thus, glycerolysis-interesterification of a PS-PO blend increased DAG and MAG concentrations and further improved the hardness, emulsion capacity, and emulsion stability of the SLs.

Targeting Antioxidants to Interfaces: Control of the Oxidative Stability of Lipid-Based Emulsions

The oxidation of lipid-based emulsions and nanoemulsions strongly affects their overall quality and safety. Moreover, introduction of oxidatively unstable emulsions into biological systems either as an energy source in parenteral nutrition or as delivery systems of bioactives may promote oxidation "in situ" leading to the overproduction of reactive oxygen species, initiating new harmful oxidative reactions and increasing the oxidative damage. Addition of antioxidants, AOs, may help to prevent the oxidative degradation of unsaturated lipids. Nevertheless, prediction of the optimal antioxidant or set of antioxidants and their efficiency is still far from being completely understood because the site of reaction is often uncertain and because the effective concentrations of reactants in the different regions of the emulsion have been frequently overlooked. Furthermore, the absence of quantitative relationships between the hydrophobicity of the antioxidants and their partitioning among the oil, water, and interfacial regions hampers their optimal use. Here we investigated the effects of gallic acid and some of its alkyl derivatives on the oxidative stability of soybean oil-in-water emulsions and determined their effective concentrations in the different regions of the emulsion (aqueous, oil, and interface). The results provide physical evidence for the crucial role played by the interfacial region in the reaction between antioxidants and lipid radicals: a direct relationship between interfacial concentrations and the oxidative stability could be established. The results indicate that AOs accumulate in the interfacial region, where the effective concentration is 20-180 times higher than the stoichiometric concentrations. Control of the hydrophobicity of the AOs and of the surfactant concentration allows control of interfacial concentrations: the lower the concentration of surfactant employed, the higher the effective interfacial concentration.

A Kinetic Approach to Determining Drug Distribution in Complex Biphasic Systems

Pharmaceutical emulsions contain multiple components, such as micellar, aqueous, and oil phases, leading to complex drug transfer and equilibrium phenomena. These complex components present challenges for the bioequivalence assessment of the drug products. The objective of the study was to develop a method that can probe the underlying mechanism and process of drug distribution. The concept of drug partitioning into biphasic systems was used to simplify the complex transfer phenomenon. A kinetic method was developed taking into account the biphasic diffusion. Using this approach, both the rate (kinetics) and the extent (equilibrium) of distribution can be determined. For method development purpose, 3 model compounds (triamcinolone acetonide, difluprednate, and cyclosporine), with expected partition coefficient values ranging from 2 to 6, were tested using the kinetic method and the traditional shake-flask method. The values obtained by the 2 methods for all compounds correlated well (r² = 0.825). Various organic and aqueous solvents which are commonly encountered in formulations were also tested to determine the impact of phase composition on drug distribution. The kinetic method was found to offer more flexibility in terms of solvent composition and can lead to better understanding for drug distribution and potential drug release in complex biphasic systems.

Enhancement of the antioxidant efficiency of gallic acid derivatives in intact fish oil-in-water emulsions through optimization of their interfacial concentrations

The antioxidant (AO) efficiencies and the distributions of gallic acid (GA) and a series of alkyl gallates (propyl, PG, butyl, BG, octyl, OG and lauryl, LG) were determined in intact fish oil-in-water emulsions. The efficiency of the AOs in inhibiting the oxidation of the fish oil lipids increases upon increasing AO hydrophobicity up to a maximum (∼3-fold) at the octyl derivative, after which the efficiency decreases (LG). The observed non-linear variation in the efficiency with the AO alkyl chain length parallels those of the percentages of AOs in the interfacial region and of their interfacial concentrations, but does not parallel that of the percentage of AOs in the oil region. The interfacial AO concentrations are 20-100 times greater than the stoichiometric (added) antioxidant concentration, depending on the interfacial surfactant volume fraction ΦI, meanwhile the AO concentrations in the oil are similar or slightly higher (1-6 fold) and the concentrations in the aqueous region are much smaller (0.8-10 fold). The effects of the oil to water (o : w) ratio on the interfacial concentrations are complex and depend on both the hydrophobicity of the AO and ΦI. An increase in the o : w ratio favors incorporation of hydrophilic AOs to the interfacial region of emulsions but it decreases the incorporation of hydrophobic AOs. Results provide, for the first time, experimental evidence supporting the interfacial region of emulsions as the main site of production of lipid radicals. Results also provide physical evidence that the efficiency of AOs depends on their interfacial concentrations, which can be modulated by increasing the hydrophobicity of the AOs and by employing the minimum amount of surfactant necessary to stabilize the emulsions. Changes in the o : w ratio can also be used to modulate the interfacial concentrations of hydrophobic (OG, LG, and to a lesser extent BG) or hydrophilic (GA) AOs, but not those of AOs of intermediate hydrophobicity (PG).

Micellar Parameters of Aqueous Solutions of Tween 20 and 60 at Different Temperatures: Volumetric and Viscometric Study

Density, viscosity and speed of sound of aqueous solutions of nonionic surfactants such as polyoxyethylene (20) sorbitan monolaurate (Tween 20) and polyoxyethylene (20) sorbitan monostearate (Tween 60) at T = 293, 303 and 313 K are reported. From these measured values different parameters such as, for example, isentropic compressibility, molecular free length, acoustic impedance, primary hydration numbers and internal pressure have been calculated and employed to discuss molecular packing, structural alteration and molecular interactions. The variation in these parameters with temperature indicates that the mobility of surfactant molecules increases the disordered state of the liquid (surfactant + water) due to irregular packing of the molecules. Also, for Tween 20 solutions, more conversion to bulk water of the structured water molecules was observed, obtaining lower compressibilities and higher values of hydration numbers as well as internal pressure for a given T.

Formulation of oil-in-water emulsions for pesticide applications: impact of surfactant type and concentration on physical stability

Oil-in-water (O/W) emulsions can be utilized as effective pesticide delivery systems in the agricultural industry. In this study, the effects of hydrophile-lipophile balance (HLB), concentration, and location of surfactants on the formation and physical stability of O/W emulsions suitable for pesticide applications was investigated using dynamic light scattering and vertical laser profiling. A non-polar pesticide (lambda-cyhalothrin) was used as a model. The pesticide emulsion with the highest stability was obtained using a commercial non-ionic surfactant (polyoxyethylene castor oil ether, EL-20) with a required HLB value of 10.5. Emulsion stability increased as the surfactant concentration was increased from 2 to 6%, which was attributed to the formation of smaller oil droplets during emulsification. Emulsions prepared with the surfactant initially in the oil phase were more stable than those prepared with it initially in the aqueous phase. The optimum formulation of the pesticide emulsion was determined as follows: 5% lambda-cyhalothrin (active ingredient) and 6% EL-20 (surfactant) dissolved in 5% S-200 (aromatic hydrocarbon, as oil phase), then deionized water up to 100%, which met the quality indicators set by the FAO standards. The present study is expected to provide useful information to improve the stability of pesticide emulsions for commercial applications.

Physical evidence that the variations in the efficiency of homologous series of antioxidants in emulsions are a result of differences in their distribution

BACKGROUND

The relationships between the hydrophilic-lipophilic balance (HLB) of antioxidants (AOs) and their distributions and efficiencies in emulsions are not fully understood. Recent reports indicate that, for series of homologous antioxidants of different hydrophobicity, the variation of their efficiency with the HLB of the AO increases with the alkyl chain length up to a maximum (C₃ -C₈ ester) followed by a decrease (cut-off effect).

RESULTS

We determined the distributions of a series of caffeic acid derivatives in intact soybean emulsions by employing a specifically designed chemical probe located in the interfacial region of the emulsion. We also determined the AO efficiencies in the very same emulsions. We demonstrate that the variation of the percentage of AO in the interfacial region of soybean oil-in-water emulsions with the AO HLB parallels that of their antioxidant efficiency.

CONCLUSION

The results provide physical evidence that the variations in the efficiency of homologous series of antioxidants in emulsions are the result of differences in their distribution. The results confirm that, with other things being equal, there is a direct relationship between the percentage of AO in the interfacial region of the emulsions and their efficiency, providing a natural explanation, based on molecular properties, of the cut-off effect. © 2016 Society of Chemical Industry.

Protective effect of gallic acid on the thermal oxidation of corn and soybean oils during high temperature heating

The comparative protective effects of gallic acid with well-known synthetic antioxidants (tert-butylhydroquinone, butylated hydroxylanisole, propylgallate) on the thermal oxidations of corn and soybean oils during heating for 8 h at 180°C were studied. The quantitative effects of gallic acid at three different concentrations on the time-course thermal oxidations in the two different vegetable oils were also studied for a prolonged heating of 6 days at 180°C. Gallic acid at 200 ppm exhibited higher protective activity than the synthetic antioxidants at the same concentration. Gallic acid also exhibited persistently strong protective activity, in a concentration dependent manner, on the changes in oxidation indices in corn and soybean oils throughout the prolonged heating period (6 days) at 180°C. The present results clearly suggested that gallic acid would be a potential natural substitute of synthetic antioxidants for the protection of vegetable oils during high temperature heating.

Interfacial Concentrations of Hydroxytyrosol and Its Lipophilic Esters in Intact Olive Oil-in-Water Emulsions: Effects of Antioxidant Hydrophobicity, Surfactant Concentration, and the Oil-to-Water Ratio on the Oxidative Stability of the Emulsions

We determined the interfacial molarities of the antioxidants, AOs, hydroxytyrosol (HT), and HT fatty acid esters with chain lengths of 1 to 16 carbons in intact olive oil/water/Tween 20 emulsions. The results were compared with chain length effects on the oxidative stability of the same emulsions, and a direct correlation was established. Both (AOI) molarities (varying 50-250 times greater than the stoichiometric 3.5 × 10(-3) M AO concentration) and antioxidant efficiencies show similar parabola-like dependences on AO chain length with a maximum at C8, consistent with the "cut-off" effect often observed at longer chain lengths. Results should aid in understanding the complex structure-reactivity relationships between AO efficiencies in emulsified systems and their hydrophobilic-hydrophobic balance.

Novel montelukast sodium-loaded stable oral suspension bioequivalent to the commercial granules in rats

To develop a montelukast sodium-loaded stable oral suspension bioequivalent to the commercial granules in rats, several montelukast sodium-loaded suspensions were prepared with a suspending agent, stabilizers and anti-aggregation agents, and their stabilities were investigated by visually observing the sedimentation phenomenon and determining the concentration of the degradation product. Moreover, dissolution and pharmacokinetic studies of the optimized formulation were examined in rats compared to commercial montelukast sodium-loaded granules. Avicel RC-591 (Avicel), a suspending agent, prevented the sedimentation of these suspensions at >2.496 (w/v) per cent composition. Amongst the stabilizers tested, fumaric acid provided the lowest concentration of montelukast sulphoxide (a degradation product) in these suspensions at 40 °C, demonstrating its excellent stabilizing activity. Furthermore, as an anti-aggregation agent, glycerin gave lower amounts of degradation product than those with poloxamer 407 and Tween 80. In particular, montelukast-loaded oral suspension, an aqueous suspension containing montelukast sodium/Avicel/fumaric acid/glycerin at a concentration of 312/2496/15.6/62.4 (mg/100 ml), and the commercial granules exhibited similar dissolution profiles in 0.5% (w/v) aqueous solution of sodium lauryl sulphate. Moreover, the pharmacokinetics in rats provided by this suspension was comparable to that of the commercial granules, suggesting that they were bioequivalent. In addition, it was physically and chemically stable at 40 °C for at least 6 months. Thus, this montelukast sodium-loaded oral suspension, with bioequivalence to the commercial granules and excellent stability, could be a prospective dosage form for the treatment of asthma.

Phospholipids in foods: prooxidants or antioxidants?

Lipid oxidation is one of the major causes of quality deterioration in natural and processed foods and thus a large economic concern in the food industry. Phospholipids, especially lecithins, are already widely used as natural emulsifiers and have been gaining increasing interest as natural antioxidants to control lipid oxidation. This review summarizes the fatty acid composition and content of phospholipids naturally occurring in several foods. The role of phospholipids as substrates for lipid oxidation is discussed, with a focus on meats and dairy products. Prooxidant and antioxidant mechanisms of phospholipids are also discussed to get a better understanding of the possible opportunities for using phospholipids as food antioxidants.

Optimizing the efficiency of antioxidants in emulsions by lipophilization: tuning interfacial concentrations

Antioxidant efficiencies in emulsions can be optimized by tailoring interfacial concentrations.

A Physicochemical Study of the Effects of Acidity on the Distribution and Antioxidant Efficiency of Trolox in Olive Oil-in-Water Emulsions

The efficiency of antioxidants to inhibit the oxidation of lipid-based emulsions depends on several factors including their nature and their concentration at the reaction site. Here, we have analyzed the effects of acidity and of surfactant concentration on the distribution and efficiency of the vitamin E analog Trolox (TR) in stripped olive oil-in-water emulsions stabilized with Tween 20. The distribution was assessed in the intact emulsions by employing a kinetic method that exploits the reaction between the hydrophobic 4-hexadecylbenzenediazonium ions and TR. Kinetic results are interpreted on the grounds of the pseudophase model. The effects of TR on the oxidative stability of the emulsion were determined at different pH values by monitoring the formation of conjugated dienes over time. The results show that the efficiency of TR increases upon increasing pH even though its concentration in the interfacial region decreases.

Assessing Interactions between Lipophilic and Hydrophilic Antioxidants in Food Emulsions

Dietary lipids containing high concentrations of polyunsaturated fatty acids are considered to be beneficial to human health, yet their incorporation within formulated foods is complicated by their susceptibility to oxidation. Lipid oxidation in foods is inhibited through the incorporation of antioxidants, yet the list of antioxidants approved for food use is small, and consumers frequently demand foods without synthetic additives. As a consequence, food processors are now tasked with improving the efficacy of approved, "natural" (i.e., nonsynthetic) antioxidants; a rational strategy for doing so involves localizing the antioxidants at the interface where oxidation usually occurs and regenerating the consumed antioxidants after the oxidation event has occurred. The present study describes a procedure to evaluate antioxidant interactions in oil-in-water food emulsions, which is based on controlled oxidation reactions induced in the dispersed oil phase by the lipophilic radical generator, 2,2'-azobis(2,4-dimethylvaleronitrile). The extent of lipid oxidation is measured spectroscopically by following the loss of an oxidatively labile, lipophilic probe (methyl eleostearate), the synthesis of which is described here. Using this procedure, the ability of various aqueous phase solvated antioxidants (ascorbic acid, gallic acid, (-)-epicatechin, (-)-epigallocatechin-3-gallate) to regenerate lipid phase solvated α-tocopherol was evaluated. In all cases, the test compounds were able to inhibit oxidation reactions; however, these effects were not profoundly synergistic, and the maximum synergistic interaction observed was only ∼ 3% using ascorbic acid.

To Model Chemical Reactivity in Heterogeneous Emulsions, Think Homogeneous Microemulsions

Two important and unsolved problems in the food industry and also fundamental questions in colloid chemistry are how to measure molecular distributions, especially antioxidants (AOs), and how to model chemical reactivity, including AO efficiency in opaque emulsions. The key to understanding reactivity in organized surfactant media is that reaction mechanisms are consistent with a discrete structures-separate continuous regions duality. Aggregate structures in emulsions are determined by highly cooperative but weak organizing forces that allow reactants to diffuse at rates approaching their diffusion-controlled limit. Reactant distributions for slow thermal bimolecular reactions are in dynamic equilibrium, and their distributions are proportional to their relative solubilities in the oil, interfacial, and aqueous regions. Our chemical kinetic method is grounded in thermodynamics and combines a pseudophase model with methods for monitoring the reactions of AOs with a hydrophobic arenediazonium ion probe in opaque emulsions. We introduce (a) the logic and basic assumptions of the pseudophase model used to define the distributions of AOs among the oil, interfacial, and aqueous regions in microemulsions and emulsions and (b) the dye derivatization and linear sweep voltammetry methods for monitoring the rates of reaction in opaque emulsions. Our results show that this approach provides a unique, versatile, and robust method for obtaining quantitative estimates of AO partition coefficients or partition constants and distributions and interfacial rate constants in emulsions. The examples provided illustrate the effects of various emulsion properties on AO distributions such as oil hydrophobicity, emulsifier structure and HLB, temperature, droplet size, surfactant charge, and acidity on reactant distributions. Finally, we show that the chemical kinetic method provides a natural explanation for the cut-off effect, a maximum followed by a sharp reduction in AO efficiency with increasing alkyl chain length of a particular AO. We conclude with perspectives and prospects.

Transfer of antioxidants at the interfaces of model food emulsions: distributions and thermodynamic parameters

Knowledge on the driving force for the hydrophobic effect that partitions antioxidants (AOs) between the oil (O), aqueous (W) and interfacial (I) regions of food emulsions is crucial to predict their efficiency in inhibiting lipid oxidation and to preserve the organoleptic properties of lipid-based foods. Here, we have investigated the effects of temperature and surfactant volume fraction (ΦI) on the distribution of two representative AOs, the water insoluble α-tocopherol (TOC) and the oil insoluble caffeic acid (CA), in a model food emulsion composed of stripped corn oil, acidic water and the nonionic surfactant Tween 20. The distribution of the AOs is assessed in the intact emulsions by employing a well-established kinetic method based on the reaction between a hydrophobic arenediazonium ion and the AOs. The variations of the observed rate constant, kobs, with ΦI are interpreted on the grounds of the pseudophase kinetic model, which provides values for the interfacial rate constant kI and the partition constants between the aqueous-interfacial (P) and oil-interfacial (P) regions of the emulsions. From the variations of P, P and kI at a series of temperatures, we determined the Gibbs free energy, enthalpy and entropy values for the transfer of CA from the water to the interfacial (W → I) region and of TOC from the oil to the interfacial (O → I) regions of the emulsions, and the activation parameters for the reaction in the interfacial region. Activation energy values are in line with those expected for a bimolecular reaction. Results show that the W → I and O → I transfer processes are spontaneous and entropy driven.

Antioxidant activity of alkyl gallates and glycosyl alkyl gallates in fish oil in water emulsions: relevance of their surface active properties and of the type of emulsifier

The antioxidant activity of gallic acid and a series of alkyl gallates (C4-C18) and glycosylated alkyl gallates (C4-C18) on fish oil-in-water emulsions was studied. Three types of emulsifiers, lecithin, Tween-20 and sodium dodecyl sulphate (SDS) were tested. A nonlinear behavior of the antioxidant activity of alkyl gallates when increasing alkyl chain length was observed for emulsions prepared with lecithin. Medium-size alkyl gallates (C6-C12) were the best antioxidants. In contrast, for emulsions prepared with Tween-20, the antioxidants seem to follow the polar paradox. Glucosyl alkyl gallates were shown previously to be better surfactants than alkyl gallates. Nevertheless, they exhibited a worse antioxidant capacity than their corresponding alkyl gallates, in emulsions prepared with lecithin or Tween-20, indicating the greater relevance of having three OH groups at the polar head in comparison with having improved surfactant properties but just a di-ortho phenolic structure in the antioxidant.

A direct correlation between the antioxidant efficiencies of caffeic acid and its alkyl esters and their concentrations in the interfacial region of olive oil emulsions. The pseudophase model interpretation of the "cut-off" effect

Recently published results for a series of homologous antioxidants, AOs, of increasing alkyl chain length show a maximum in AO efficiency followed by a significant decrease for the more hydrophobic AOs, typically called the "cut-off" effect. Here we demonstrate that in olive oil emulsions both antioxidant efficiencies and partition constants for distributions of AOs between the oil and interfacial regions, PO(I), show a maximum at the C8 ester. A reaction between caffeic acid, CA, and its specially synthesised C1-C16 alkyl esters, and a chemical probe is used to estimate partition constants for AO distributions and interfacial rate constants, kI, in intact emulsions based on the pseudophase kinetic model. The model provides a natural interpretation for both the maximum and the "cut-off" effect. More than 70% of the CA esters are in the interfacial region even at low surfactant volume fraction, ΦI=0.005.