Role of surfactants in the control of dopamine–eumelanin particle size and in the inhibition of film deposition at solid–liquid interfaces

Nonspherical Particle Stabilized Emulsions Formed through Destabilization and Arrested Coalescence

To form nonspherical emulsion droplets, the interfacial tension driving droplet sphericity must be overcome. This can be achieved through interfacial particle jamming; however, careful control of particle coverage is required. In this work, we present a scalable novel batch process to form nonspherical particle-stabilized emulsions. This is achieved by concurrently forming interfacially active particles and drastically accelerating emulsion destabilization through addition of electrolyte. To achieve this, surfactant-stabilized oil-in-water emulsions in the presence of dopamine were first produced. These emulsions were then treated with tris(hydroxymethyl)aminomethane hydrochloride buffer to both simultaneously initiate polymerization of dopamine in the emulsion continuous phase and reduce the Debye length of the system, thus accelerating droplet coalescence while forming surface-active particles. The concentration of buffer and imposed shear was then systematically varied, and the behavior at the interface was studied using pendent drop tensiometry and interfacial shear rheology. It was found that polydopamine nanoparticles formed in the emulsion continuous phase adsorbed to the reducing interface during coalescence, resulting in anisotropic droplets formed via arrested coalescence. Greater shear rates resulted in accelerated coalescence and formation of secondary droplets, whereas lower shear rates resulted in thicker interfacial films. The efficacy of this method was further demonstrated with a second system consisting of sodium dodecyl sulfate as the surfactant and polypyrrole particles, which also resulted in nonspherical droplets for optimized conditions.

The synthesis of polydopamine nano- and microspheres in microdroplets

Here we developed a microdroplet-based strategy for the rapid synthesis of uniform polydopamine nano- and microspheres. Polydopamine spheres with controllable sizes were generated within hundreds of microseconds by simply spraying water solutions of dopamine into microdroplets. Mass spectrometry revealed that dopamine was primarily oxidized into aminochrome, acting as the major building block for polydopamine. We anticipate that microdroplet chemistry will be rich in opportunities for the synthesis of functional nano- and micromaterials.

Mechanism of Self-Oxidative Copolymerization and its Application with Polydopamine-pyrrole Nano-copolymers

Currently, the copolymer of dopamine (DA) and pyrrole (PY) via chemical and electrochemical oxidation usually requires additional oxidants, and lacks flexibility in regulating the size and morphology, thereby limiting the broad applications of DA-PY copolymer in biomedicine. Herein, the semiquinone radicals produced by the self-oxidation of DA is ingeniously utilized as the oxidant to initiate the following copolymerization with PY, and a series of quinone-rich polydopamine-pyrrole copolymers (PDAm-nPY) with significantly enhanced absorption in near-infrared (NIR) region without any additional oxidant assistance is obtained. Moreover, the morphology and size of PDAm-nPY can be regulated by changing the concentration of DA and PY, thereby optimizing nanoscale PDA0.05-0.15PY particles (≈ 150 nm) with excellent NIR absorption and surface modification activity are successfully synthesized. Such PDA0.05-0.15PY particles show effective photoacoustic (PA) imaging and photothermal therapy (PTT) against 4T1 tumors in vivo. Furthermore, other catechol derivatives can also copolymerize with PY under the same conditions. This work by fully utilizing the semiquinone radical active intermediates produced through the self-oxidation of DA reduces the dependence on external oxidants in the synthesis of composite materials and predigests the preparation procedure, which provides a novel, simple, and green strategy for the synthesis of other newly catechol-based functional copolymers.

Interactions of Melanin with Electromagnetic Radiation: From Fundamentals to Applications

Melanin, especially integumentary melanin, interacts in numerous ways with electromagnetic radiation, leading to a set of critical functions, including radiation protection, UV-protection, pigmentary and structural color productions, and thermoregulation. By harnessing these functions, melanin and melanin-like materials can be widely applied to diverse applications with extraordinary performance. Here we provide a unified overview of the melanin family (all melanin and melanin-like materials) and their interactions with the complete electromagnetic radiation spectrum (X-ray, Gamma-ray, UV, visible, near-infrared), which until now has been absent from the literature and is needed to establish a solid fundamental base to facilitate their future investigation and development. We begin by discussing the chemistries and morphologies of both natural and artificial melanin, then the fundamentals of melanin-radiation interactions, and finally the exciting new developments in high-performance melanin-based functional materials that exploit these interactions. This Review provides both a comprehensive overview and a discussion of future perspectives for each subfield of melanin that will help direct the future development of melanin from both fundamental and applied perspectives.

Mesoporous Silicon Nanoparticles with Liver-Targeting and pH-Response-Release Function Are Used for Targeted Drug Delivery in Liver Cancer Treatment

This article aims to develop an aspirin-loaded double-modified nano-delivery system for the treatment of hepatocellular carcinoma. In this paper, mesoporous silica nanoparticles (MSN) were prepared by the "one-pot two-phase layering method", and polydopamine (PDA) was formed by the self-polymerization of dopamine as a pH-sensitive coating. Gal-modified PDA-modified nanoparticles (Gal-PDA-MSN) were synthesized by linking galactosamine (Gal) with actively targeted galactosamine (Gal) to PDA-coated MSN by a Michael addition reaction. The size, particle size distribution, surface morphology, BET surface area, mesoporous size, and pore volume of the prepared nanoparticles were characterized, and their drug load and drug release behavior in vitro were investigated. Gal-PDA-MSN is pH sensitive and targeted. MSN@Asp is different from the release curves of PDA-MSN@Asp and Gal-PDA-MSN@Asp, the drug release of PDA-MSN@Asp and Gal-PDA-MSN@Asp accelerates with increasing acidity. In vitro experiments showed that the toxicity and inhibitory effects of the three nanodrugs on human liver cancer HepG2 cells were higher than those of free Asp. This drug delivery system facilitates controlled release and targeted therapy.

Experimental Methods to Get Polydopamine Films: A Comparative Review on the Synthesis Methods, the Films' Composition and Properties

In 2007, polydopamine (PDA) films were shown to be formed spontaneously on the surface of all known classes of materials by simply dipping those substrates in an aerated dopamine solution at pH = 8.5 in the presence of Tris(hydroxymethyl) amino methane buffer. This universal deposition method has raised a burst of interest in surface science, owing not only to the universality of this water based one pot deposition method but also to the ease of secondary modifications. Since then, PDA films and particles are shown to have applications in energy conversion, water remediation systems, and last but not least in bioscience. The deposition of PDA films from aerated dopamine solutions is however a slow and inefficient process at ambient temperature with most of the formed material being lost as a precipitate. This incited to explore the possibility to get PDA and related films based on other catecholamines, using other oxidants than dissolved oxygen and other deposition methods. Those alternatives to get PDA and related films are reviewed and compared in this paper. It will appear that many more investigations are required to get better insights in the relationships between the preparation method of PDA and the properties of the obtained coatings.

Biofouling-Resistant Ultrafiltration Membranes via Codeposition of Dopamine and Cetyltrimethylammonium Bromide with Retained Size Selectivity and Water Flux

Biofouling is a serious problem in ultrafiltration (UF) membrane applications. Modifying the surface of membranes with low molecular weight, commercially available antibacterial chemistries is an excellent strategy to mitigate biofouling. Herein, we report a new strategy to impart antibacterial and anti-biofouling behavior without changing the support membrane's size selectivity and pure water permeance (PWP). To this end, a strong antibacterial agent, cetyltrimethylammonium bromide (CTAB), was codeposited with dopamine onto commercial polyethersulfone (PES) UF membranes in the presence of nitrogen (N₂) gas backflow. The PWP and pore size of the support membrane did not change with codeposition, confirming the benefit of N₂ backflow in mitigating the solution intrusion phenomenon. X-ray photoelectron spectroscopy (XPS), surface ζ potentials, and contact angle measurements confirmed the successful codeposition of polydopamine (PDA) and CTAB onto the membrane. Among three different CTAB concentrations systematically investigated, the membrane functionalized with CTAB at the critical micelle concentration (CMC) provided the best anti-biofouling activity against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria and retained its surface ζ potential after being stored in 1 M NaCl (pH = 6.8) for 3 months. Our results demonstrate the potential of using a facile, one-step approach to modify commercial UF membranes without compromising their pore size or flux, while simultaneously endowing antibacterial activity.

Polydopamine, harness of the antibacterial potentials-A review

Antibiotic resistance is one of the major causes of morbidity and mortality, triggered by the adhesion of microbes and to some extent the formation of biofilms. This condition has been quite challenging in the health and industrial sector. Conditions and processes required to foil these infectious and resistance are of much concern. The synthesis of PDA material, inspired by the Mytilus edulis foot protein (MEFP)5 possesses unique characteristics that allow for, adhesion, photothermal therapy, synergistic effects with other materials, biocompatibility process, etc. Therefore, their usage holds great potential for dealing with both the infectious nature and the antibiotic resistance processes. Hence, this review provides an overview of the mechanism involved in accomplishing and eradicating bacteria, the recently harnessed antibacterial effect of the PDA through other properties they possess, a way forward in tapping the benefit embedded in the PDA, and the future perspective.

Tunable Properties of Polydopamine Nanoparticles and Coated Surfaces

Polydopamine (PDA) nanoparticles and PDA-coated surfaces have wide applications due to PDA's unique reactivity and efficient coating ability on nearly any surface. However, challenges in manipulating and controlling dopamine polymerization and thus the PDA nanoparticle formations and surface coatings still exist. Here, dopamine with a tetraborate (borax)-protected catechol group was utilized to tune the properties of PDA nanoparticles and PDA coatings. This method allows us to (1) synthesize PDA nanoparticles with a narrow size distribution and low aggregation and (2) create surface coating with the desired PDA layer thickness and varying water contact angles. PDA nanoparticles and PDA-coated surfaces of varying but tunable chemical and physical properties will find wide applications. For example, such PDA-coated surfaces were successfully used to construct Ag nanoparticle patterned surfaces with varying Ag particle sizes and densities.

Recent advances in dopamine-based materials constructed via one-pot co-assembly strategy

Dopamine-based materials have attracted widespread interest due to the outstanding physicochemical and biological properties. Since the first report on polydopamine (PDA) films, great efforts have been devoted to develop new fabrication strategies for obtaining novel nanostructures and desirable properties. Among them, one-pot co-assembly strategy offers a unique pathway for integrating multiple properties and functions into dopamine-based platform in a single simultaneous co-deposition step. This review focuses on the state of the art development of one-pot multicomponent self-assembly of dopamine-based materials and summarizes various single-step co-deposition approaches, including PDA-assisted adaptive encapsulation, co-assembly of dopamine with other molecules through non-covalent interactions or covalent interactions. Moreover, emerging applications of dopamine-based materials in the fields ranging from sensing, cancer therapy, catalysis, oil/water separation to antifouling are outlined. In addition, some critical remaining challenges and opportunities are discussed to pave the way towards the rational design and applications of dopamine-based materials.

The Bioactive Polypyrrole/Polydopamine Nanowire Coating with Enhanced Osteogenic Differentiation Ability with Electrical Stimulation

Polypyrrole (PPy) is a promising conducting polymer in bone regeneration; however, due to the biological inertia of the PPy surface, it has poor cell affinity and bioactivity. Based on the excellent adhesion capacity, biocompatibility, and bioactivity of polydopamine (PDA), the PDA is used as a functional coating in tissue repair and regeneration. Herein, we used a two-step method to construct a functional conductive coating of polypyrrole/polydopamine (PPy/PDA) nanocomposite for bone regeneration. PPy nanowires (NWs) are used as the morphologic support layer, and a layer of highly bioactive PDA is introduced on the surface of PPy NWs by solution oxidation. By controlling the depositing time of PDA within 5 h, the damage of nano morphology and conductivity of the PPy NWs caused by the coverage of PDA deposition layer can be effectively avoided, and the thin PDA layer also significantly improve the hydrophilicity, adhesion, and biological activity of PPy NWs coating. The PPy/PDA NWs coating performs better biocombaitibility and bioactivity than pure PPy NWs and PDA, and has benefits for the adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 cells cultured on the surface. In addition, PPy/PDA NWs can significantly promote the osteogenesis of MC3T3-E1 in combination with micro galvanostatic electrical stimulation (ES).

Nanoparticles modified by polydopamine: Working as "drug" carriers

Inspired by the mechanism of mussel adhesion, polydopamine (PDA), a versatile polymer for surface modification has been discovered. Owing to its unique properties like extraordinary adhesiveness, excellent biocompatibility, mild synthesis requirements, as well as distinctive drug loading approach, strong photothermal conversion capacity and reactive oxygen species (ROS) scavenging facility, various PDA-modified nanoparticles have been desired as drug carriers. These nanoparticles with diverse nanostructures are exploited in multifunctions, consisting of targeting, imaging, chemical treatment (CT), photodynamic therapy (PDT), photothermal therapy (PTT), tissue regeneration ability, therefore have attracted great attentions in plenty biomedical applications. Herein, recent progress of PDA-modified nanoparticle drug carriers in cancer therapy, antibiosis, prevention of inflammation, theranostics, vaccine delivery and adjuvant, tissue repair and implant materials are reviewed, including preparation of PDA-modified nanoparticle drug carriers with various nanostructures and their drug loading strategies, basic roles of PDA surface modification, etc. The advantages of PDA modification in overcoming the existing limitations of cancer therapy, antibiosis, tissue repair and the developing trends in the future of PDA-modified nanoparticle drug carriers are also discussed.

•

Multifunctional PDA-modified drug systems are introduced in terms of classification, synthesis and drug loading strategies.

•

Basic roles of PDA surface modification in the drug systems are discussed.

•

Biomedical applications and unique advantages of the PDA-modified nanoparticle working as drug carriers are illustrated.

•

Challenges and perspectives for future development are proposed.

Polydopamine as a stable and functional nanomaterial

The mussel inspired chemistry of dopamine leading to versatile coatings on the surface of all kinds of materials in a one pot process was considered as the unique aspect of catecholamine for a long time. Only recently, research has been undertaken to valorize the simultaneous oxidation and colloid formation in dopamine solutions in the presence of an oxidant. This mini review summarizes the synthesis methods allowing to get controlled nanomaterials, either nanoparticles, hollow capsules or nanotubes and even chiral nanomaterials from dopamine solutions. Finally the applications of those nanomaterials will be described.

Direct Evidence for the Critical Role of 5,6-Dihydroxyindole in Polydopamine Deposition and Aggregation

The definitive role of the intermediate 5,6-dihydroxyindole (DHI) in the formation of polydopamine (PDA) coatings from aqueous dopamine (DA) has not been clearly elucidated and remains highly controversial. Our foray into this debate as reported in this study agrees with some reported assertions that DHI-based coatings are not synonymous with PDA coatings. Our conclusion arises from a systematic comparison of the components and properties of DHI-based coatings and PDA coatings. In addition, through careful copolymerization studies of DA and DHI, our studies reported herein unequivocally suggest that both DA and DHI are partial building blocks for PDA formation. Our results also provide additional evidence of the critical role of DHI in controlling the thickness of PDA coatings, through competitive events between PDA aggregation in solutions and deposition onto substrates. These findings highlight the complex interplay between both DHI and uncyclized DA moieties in the formation of adhesive catechol/amine materials.

Competitive self-assembly driven as a route to control the morphology of poly(tannic acid) assemblies

With an attempt to develop some supermolecular assemblies of a particular structure through a controllable method, the present study developed two distinct assembly patterns for Poly(Tannic Acid) (PTA) by means of adjusting the components and composition of a binary solvent system. The assembly mechanism was explored through the comparison of theoretical calculations and experimental results with respect to how solvent sets affect the nature of intermolecular interactions among oligomers. The results indicate that the morphology of the aggregates of PTA is determined from the nature of the intermolecular interactions among oligomers. While a cuboid shaped aggregate is likely the result of π-π stacking self-assembly, a sphere shaped morphology is formed through intermolecular hydrogen bonding among the oligomers. The results of the present work provide valuable resources to tune the aggregation morphology by quantitatively adjusting the physical properties of the binary solvent.

Preparation of lysozyme-imprinted nanoparticles on polydopamine-modified titanium dioxide using ionic liquid as a stabilizer

Molecular imprinting of proteins has evolved into an efficient approach for protein recognition and separation. However, maintaining the structural stability of proteins during the preparation process of molecularly imprinted polymers (MIPs) remains challenging. Ionic liquids (ILs), being capable of maintaining the stability of proteins, might enable effective imprinting and accurate recognition of proteins. In this study, lysozyme (Lyz)-imprinted titanium dioxide (TiO₂) nanoparticles, TiO₂@Lyz-MIPs, have been successfully prepared for selective recognition and separation of Lyz. This was achieved by the free radical polymerization of hydroxyethyl acrylate (HEA) and poly(ethylene glycol) dimethacrylate (PEGDMA) on polydopamine (PDA)-modified TiO₂ nanoparticles using an IL, choline dihydrogen phosphate (chol dhp), as the stabilizer of Lyz. It was found that both PDA modification of TiO₂ and the use of chol dhp as stabilizer improved the adsorption capacity of TiO₂@Lyz-MIPs toward Lyz. When the concentration of HEA was 7 mg mL⁻¹, the ratio of monomer to crosslinker was 20 : 1, and the concentration of chol dhp was 12.5 mg mL⁻¹, the highest imprinting factor of 4.40 was achieved. TiO₂@Lyz-MIPs exhibited relatively high adsorption capacity with the maximum adsorption capacity up to 120 mg g⁻¹, which was more than four times higher than that of the non-imprinted polymers (NIPs) counterpart, TiO₂@Lyz-NIPs. The adsorption rate of Lyz by TiO₂@Lyz-MIPs was also much higher than that of TiO₂@Lyz-NIPs. TiO₂@Lyz-MIPs could successfully separate Lyz from diluted egg white, a complex mixture of proteins. Findings from this study indicate that effective recognition cavities toward Lyz were formed on the surface of Lyz-imprinted TiO₂ nanoparticles prepared using IL as the template stabilizer. This approach may facilitate the development of MIPs for efficient protein recognition and separation.

Molecular imprinting of proteins has evolved into an efficient approach for protein recognition and separation.

Polymer-Nanoparticle Interaction as a Design Principle in the Development of a Durable Ultrathin Universal Binary Antibiofilm Coating with Long-Term Activity

Bacterial attachment and biofilm formation pose major challenges to the optimal performance of indwelling devices. Current coating methods have significant deficiencies including the lack of long-term activity, easy of application, and adaptability to diverse materials. Here we describe a coating method that could potentially overcome such limitations and yield an ultrathin coating with long-term antibiofilm activity. We utilized the interaction between polydopamine (PDA) nanoaggregates/nanoparticles and ultrahigh molecular weight (uHMW) hydrophilic polymers to generate stable coatings with broad spectrum antibiofilm activity. We used a short-term bacterial adhesion assay as an initial screening method to identify coating compositions that give superior performance and found that only selected polymers (out of 13 different types) and molecular weights gave promising antifouling activity. Optimization of PDA self-assembly, polymer-PDA interaction, and deposition on the surface using uHMW poly( N,N-dimethylacrylamide) (PDMA) (∼795 kDa) resulted in a stable ultrathin coating (∼19 nm) with excellent antifouling and antibiofilm properties (>4 weeks) against diverse bacteria (∼10⁸ CFU/mL) in shaking and flow conditions. The ultrathin coating is effective on diverse substrates including metals and polymeric substrates. The uHMW PDMA is stabilized in the coating via supramolecular interactions with PDA and generated a surface that is highly enriched with PDMA in aqueous conditions. Based on the surface analyses data, we also propose a mechanism for the stable coating formation. The molecular weight of PDMA is a crucial factor, and only uHMW polymers generate this property. An attractive feature of the coating is that it does not contain any antimicrobial agents and has the potential to prevent biofilm formation for diverse applications both short- and long-term.

Enzymatically Active Polydopamine @ Alkaline Phosphatase Nanoparticles Produced by NaIO4 Oxidation of Dopamine

Polydopamine (PDA) deposition, obtained from the oxidation of dopamine and other catecholamines, is a universal way to coat all known materials with a conformal coating which can subsequently be functionalized at will. The structural analogies between polydopamine and eumelanin, the black-brown pigment of the skin, were incited to produce stable polydopamine nanoparticles in solution, instead of amorphous precipitates obtained from the oxidation of dopamine. Herein, we demonstrate that size-controlled and colloidally stable PDA-based nanoparticles can be obtained in acidic conditions, where spontaneous auto-oxidation of dopamine is suppressed, using sodium periodate as the oxidant and a protein, like alkaline phosphatase (ALP), as a templating agent. The size of the PDA@ALP nanoparticles depends on the dopamine/enzyme ratio and the obtained particles display enzymatic activity of alkaline phosphatase, with an activity extending up to two weeks after particle synthesis. The PDA@ALP nanoparticles can be engineered in polyelectrolyte multilayered films to potentially design model biosensors.

Facile synthesis of ultrasmall polydopamine-polyethylene glycol nanoparticles for cellular delivery

Very small polydopamine (PDA) polyethylene glycol (PEG) crosslinked copolymer (PDA-PEG) nanoparticles have been prepared following a convenient one-step procedure in aqueous solution. Particle sizes and colloidal stabilities have been optimized by varying PEG in view of chain length and end group functionalities. In particular, amine-terminated PEG3000 [PEG₃₀₀₀(NH₂)₂] reacted with polydopamine intermediates so that very small, crosslinked PDA-PEG nanoparticles with sizes of less than 50 nm were formed. These nanoparticles remained stable in buffer solution and no sedimentation occurred. Chemical functionalization was straight-forward as demonstrated by the attachment of fluorescent dyes. The PDA-PEG nanoparticles revealed efficient cellular uptake via endocytosis and high cytocompatibility, thus rendering them attractive candidates for cell imaging or for drug delivery applications.

Application of polydopamine in tumor targeted drug delivery system and its drug release behavior

Inspired by the bionics of marine mussels, polydopamine (PDA), a new polymer with unique physicochemical properties was discovered. Due to its simple preparation, good biocompatibility, unique drug-loading methods, PDA has attracted tremendous attentions in field of drug delivery and imaging, and the combination of chemotherapy and other therapies or diagnostic methods, such as photothermotherapy (PTT), photoacoustic imaging (PAI), magnetic resonance imaging (MRI), etc. As an excellent drug carrier in tumor targeted drug delivery system, the drug release behavior of drug-loaded PDA-based nanoparticles is also an important factor to be considered in the establishment of drug delivery systems. Therefore, the purpose of this review is to provide a comprehensive overview of the various applications of PDA in tumor targeted drug delivery systems and to gain insight into the release behavior of the drug-loaded PDA-based nanocarriers. A sufficient understanding and discussion of these aspects is expected to provide a better way to design more rational and effective PDA-based tumor nano-targeted delivery systems. Apart from this, the prospects for the future application of PDA in this field and some unique insights are listed at the end of the article.

Polydopamine Nanomaterials: Recent Advances in Synthesis Methods and Applications

Polydopamine (PDA), the final oxidation product of dopamine or other catecholamines, attracted much attention as versatile coatings that can be used to cover the surface of almost all materials with a conformal layer of adjustable thickness ranging from a few to about 100 nm. These PDA layers can be subsequently modified with molecules carrying nucleophilic groups or with metallic nanoparticles from solutions containing metallic cations. However, during the deposition of PDA film on the surfaces, the reaction products that are simultaneously obtained from the oxidation of catecholamines in solution precipitate. Hence, some recent effort has been devoted to produce PDA in the form of nanoparticles. The aim of this short review is to give a comprehensive description of the synthesis methods yielding of PDA nanoparticles in the absence or in the presence of templating agents (polymers, polyelectrolytes, surfactants, proteins, and even some small organic molecules). We will also describe the use of thin PDA layers to coat already synthesized nanoparticles or nanotubes. Finally, several first applications of the obtained PDA nanoparticles will be described.

Recent progress in the biomedical applications of polydopamine nanostructures

Polydopamine is a dark brown-black insoluble biopolymer produced by autoxidation of dopamine. Although its structure and polymerization mechanism have not been fully understood, there has been a rapid growth in the synthesis and applications of polydopamine nanostructures in biomedical fields such as drug delivery, photothermal therapy, bone and tissue engineering, and cell adhesion and patterning, as well as antimicrobial applications. This article is dedicated to reviewing some of the recent polydopamine developments in these biomedical fields. Firstly, the polymerization mechanism is introduced with a discussion of the factors that influence the polymerization process. The discussion is followed by the introduction of various forms of polydopamine nanostructures and their recent applications in biomedical fields, especially in drug delivery. Finally, the review is summarized followed by brief comments on the future prospects of polydopamine.

Boric Acid as an Efficient Agent for the Control of Polydopamine Self-Assembly and Surface Properties

The deposition of polydopamine (PDA) films on surfaces, a versatile deposition method with respect to the nature of the used substrate, is unfortunately accompanied by deposition of insoluble precipitates in solution after a prolonged oxidation time of dopamine solutions. Therefore, there is evident interest to find methods able to stop the deposition of PDA on surfaces and to simultaneously control the self-assembly of PDA in solution to get stable colloidal aggregates. In addition to proposed methods relying on the use of polymers like poly(vinyl alcohol) and proteins like human serum albumin, we show herein that boric acid is an efficient adjuvant that is simultaneously able to stop the self-assembly of PDA in solution as well as on surfaces and to change the adhesive properties of the resulting PDA coatings.

Nanoscale Polydopamine (PDA) Meets π-π Interactions: An Interface-Directed Coassembly Approach for Mesoporous Nanoparticles

Well known for the adhesive property, mussel-inspired polydopamine (PDA) has been shown to enhance performance in a wide range of adsorption-based applications. However, imparting porous nanostructures to PDA materials for enhanced loading capacities has not been demonstrated even when surfactants were present in the synthesis. Herein, we report on the preparation of mesoporous PDA particles (MPDA) based on the assembly of primary PDA particles and Pluronic F127 stabilized emulsion droplets on water/1,3,5-trimethylbenzene (TMB) interfaces. The key to the formation of this new type of the MPDA structure is the full utilization of the π-π stacking interactions between PDA structures and the π-electron-rich TMB molecules. Remarkably, this method presents a facile approach for MPDA particles with an average diameter of ∼90 nm, slit-like pores with a peak size of ∼5.0 nm as well as hollow cavities. When used as the adsorbent for a model dye RhB, the MPDA particles achieved an ultrahigh RhB adsorption capacity of 1100 μg mg^-1, which is significantly higher than that for the PDA-reactive dyes with Eschenmoser structure. Moreover, it was demonstrated that the cavity space in MPDA can facilitate high volumetric uptake in a capillary filling/stacking manner via the π-π interactions. These developments pave a new avenue on the mechanism and the designed synthesis of functional PDA materials by organic-organic composite assembly for advanced adsorption applications.

Hydroxide ion-mediated synthesis of monodisperse dopamine-melanin nanospheres

Dopamine-melanin nanospheres are promising materials for photoprotection, structural coloration, and thermoregulation due to their unusual optical and chemical properties. Here, we report the experimental parameters which influence size of dopamine-melanin nanospheres and uniformity. Dopamine precursors are oxidatively polymerized in basic aqueous medium. Therefore, concentration of hydroxide ions significantly influences reaction rate and size of nanospheres. To investigate the effect of hydroxide ions, we adjust three different parameters which affect pH of medium: concentration of sodium hydroxide and dopamine hydrochloride, and reaction temperature. At constant temperature, concentration of hydroxide ions is linearly proportional to initial reaction rates which determine the number of nuclei for nanosphere growth. Temperature alters not only initial reaction rate but also diffusivity of molecules, leading to deviation from the relation between the reaction rate and the number of nuclei. The diameter of dopamine-melanin nanospheres can be readily controlled in a range of 80-490nm through adjusting concentration of dopamine precursor, while maintaining uniform-size distribution and dispersion stability. The synthesized nanospheres are analyzed to confirm the chemical structure, which is composed of approximately 6 indole units. Moreover, surface and chemical properties of the nanospheres are characterized to provide valuable information for surface modification and application.