Studying bubble–particle interactions by zeta potential distribution analysis

Modification of the distribution of humic acid complexations by introducing microbubbles to membrane distillation process for effective membrane fouling alleviation

Membrane fouling caused by inorganic ions and natural organic matters (NOMs) has been a severe issue in membrane distillation. Microbubble aeration (MB) is a promising technology to control membrane fouling. In this study, MB aeration was introduced to alleviate humic acid (HA) composited fouling during the treatment of simulative reverse osmosis concentrate (ROC) by vacuum membrane distillation (VMD). The objective of this work was to explore the HA fouling inhibiting effect by MB aeration and discuss its mechanism from the interfacial point of view. The results showed that VMD was effective for treating ROC, followed by a severe membrane fouling aggravated with the addition of 100 mg/L HA in feed solution, resulting in 45.7% decline of membrane flux. Analysis using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and zeta potential distribution of charged particles proved the coexistence of HA and inorganic cations (especially Ca2+), resulting in more serious membrane fouling. The introduction of MB aeration exhibited excellent alleviating effect on HA-inorganic salt fouling, with the normalized flux increased from 19.7% to 37.0%. The interfacial properties of MBs played an important role, which altered the zeta potential distributions of charged particles in HA solution, indicating that MBs adhere the HA complexations. Furthermore, this mitigating effect was limited at high inorganic cations concentration. Overall, MBs could change the potential characteristics of HA complexes, which also be used for other similar membrane fouling alleviation.

The Role of Silica Nanoparticles in Promoting the Germination of Tomato (Solanum lycopersicum) Seeds

The addition of nanoparticles has been reported to be an effective strategy for enhancing seed germination, but the underlying mechanisms whereby this occurs are unclear. In the present study, we added silica nanoparticles (SiNPs) to an aqueous growth medium in which tomato seeds were germinated. We examined the effects of SiNPs on growth and possible mechanisms of action. SiNPs had a diameter of 10-17 nm and 110-120 nm. SiNPs shortened the mean germination time from 5.24 ± 0.29 days to 4.64 ± 0.29 days. Seedling vigor, measured by criteria including length and weight, was also improved compared to the control condition. The presence of SiNPs in the seedlings was assessed using an X-ray fluorescence spectrometer. The nanoparticles may have promoted germination by enhancing water imbibition by the seeds or altering the external microenvironment. Scanning electron microscopy revealed changes in the seed coat during germination, many of which were only observed in the presence of nanoparticles. Soil bacteria affect germination; specifically, Bacillus sp. may promote germination. The number of Bacillus sp. changed in the germination medium with SiNPs compared to the control. This suggested that these bacteria could interact with SiNPs to promote germination.

Recent Developments in Generation, Detection and Application of Nanobubbles in Flotation

This paper reviews recent developments in the fundamental understating of ultrafine (nano) bubbles (NBs) and presents technological advances and reagent types used for their generation in flotation. The generation of NBs using various approaches including ultrasonication, solvent exchange, temperature change, hydrodynamic cavitation, and electrolysis was assessed. Most importantly, restrictions and opportunities with respect to the detection of NBs were comprehensively reviewed, focusing on various characterization techniques such as the laser particle size analyzer (LPSA), nanoparticle tracking (NTA), dynamic light scattering (DLS), zeta-phase light scattering (ZPALS), and zeta sizer. As a key feature, types and possible mechanisms of surfactants applied to stabilize NBs were also explored. Furthermore, flotation-assisted nano-bubbles was reported as an efficient method for recovering minerals, with a special focus on flotation kinetics. It was found that most researchers reported the existence and formation of NBs by different techniques, but there is not enough information on an accurate measurement of their size distribution and their commonly used reagents. It was also recognized that a suitable method for generating NBs, at a high rate and with a low cost, remains a technical challenge in flotation. The application of hydrodynamic cavitation based on a venturi tube and using the LPSA and NTA in laboratory scales were identified as the most predominant approaches for the generation and detection of NBs, respectively. In this regard, neither pilot- nor industrial-scale case studies were found in the literature; they were only highlighted as future works. Although the NB-stabilizing effects of electrolytes have been well-explored, the mechanisms related to surfactants remain the issue of further investigation. The effectiveness of the NB-assisted flotation processes has been mostly addressed for single minerals, and only a few works have been reported for bulk materials. Finally, we believe that the current review paves the way for an appropriate selection of generating and detecting ultrafine bubbles and shines the light on a profound understanding of its effectiveness.

Effective Separation of High-Ash Fine Coal Using Water Containing Positively Charged Nanobubbles and Polyaluminum Chloride

The coal industry is facing the challenge of treating high-ash fine coal. In this study, we proposed an effective method to handle high-ash fine coal using water containing positively charged nanobubbles (PCNBs) and polyaluminum chloride (PAC). For comparison, normal nanobubble (NB) water was tested in parallel. Flotation results of a modeled high-ash fine coal showed that compared to the use of NBs alone, an enhanced combustible recovery with a simultaneous reduction in ash recovery was obtained when using water containing PCNBs and PAC. Particle size distribution together with particle video microscopy (PVM) and the degree of entrainment analysis were conducted to understand the underpinning mechanism. It was found that the presence of PCNBs intensified the aggregation of fine coal particles, which accounted for the boosted combustible recovery. It was interesting that PAC could disrupt coal flocs induced by NBs, leading to the release of trapped kaolinite particles with alleviated clay recovery by entrapment.

Novel treatment of Microcystis aeruginosa using chitosan-modified nanobubbles

In this study, we treated harmful Microcystis aeruginosa cyanobacteria using chitosan-modified nanobubbles. The chitosan-modified nanobubbles (255 ± 19 nm) presented a positive zeta potential (15.36 ± 1.17 mV) and generated significantly (p < 0.05) more hydroxyl radicals than the negatively charged nanobubbles (-20.68 ± 1.11 mV). Therefore, the interaction between the positively charged chitosan-modified nanobubbles and negatively charged M. aeruginosa (-34.81 ± 1.79 mV) was favored. The chitosan-modified nanobubble treatment (2.20 × 10⁸ particles mL^-1) inactivated 73.16% ± 2.23% of M. aeruginosa (2.00 × 10⁶ cells mL^-1) for 24 h without causing significant cell lysis (≤0.25%) and completely inhibited the acute toxicity of M. aeruginosa toward Daphnia magna. The inactivation was correlated (r² = 0.97) with the formation of reactive oxygen species (ROS) in M. aeruginosa. These findings indicated that the hydroxyl radicals generated by the chitosan-modified nanobubbles disrupted cell membrane integrity and enhanced oxidative stress (ROS formation), thereby inactivating M. aeruginosa. Moreover, the penetration of the chitosan-modified nanobubbles and cell alterations in M. aeruginosa were visually confirmed. Our results suggested that the chitosan-modified nanobubble treatment is an eco-friendly method for controlling harmful algae. However, further studies are required for expanding its practical applications.

Comprehensive in vitro comparison of cellular and osteogenic response to alternative biomaterials for spinal implants

A variety of novel biomaterials are emerging as alternatives to conventional metals and alloys, for use in spinal implants. These promise potential advantages with respect to e.g. elastic modulus compatibility with the host bone, improved radiological imaging or enhanced cellular response to facilitate osseointegration. However, to date there is scarce comparative data on the biological response to many of these biomaterials that would give insights into the relative level of bone formation, resorption inhibition and inflammation. Thus, in this study, we aimed to evaluate and compare the in vitro biological response to standard discs of four alternative biomaterials: polyether ether ketone (PEEK), zirconia toughened alumina (ZTA), silicon nitride (SN) and surface-textured silicon nitride (ST-SN), and the reference titanium alloy Ti6Al4V (TI). Material-specific characteristics of these biomaterials were evaluated, such as surface roughness, wettability, protein adsorption (BSA) and apatite forming capacity in simulated body fluid. The activity of pre-osteoblasts seeded on the discs was characterized, by measuring viability, proliferation, attachment and morphology. Then, the osteogenic differentiation of pre-osteoblasts was compared in vitro from early to late stage by Alizarin Red S staining and real-time PCR analysis. Finally, osteoclast activity and inflammatory response were assessed by real-time PCR analysis. Compared to TI, all other materials generally demonstrated a lower osteoclastic activity and inflammatory response. ZTA and SN showed generally an enhanced osteogenic differentiation and actin length. Overall, we could show that SN and ST-SN showed a higher osteogenic effect than the other reference groups, an inhibitive effect against bone resorption and low inflammation, and the results indicate that silicon nitride has a promising potential to be developed further for spinal implants that require enhanced osseointegration.

Transition between a Pickering Emulsion and an Oil-in-Dispersion Emulsion Costabilized by Alumina Nanoparticles and a Cationic Surfactant

The transition between a novel oil-in-dispersion emulsion and an oil-in-water (O/W) Pickering emulsion triggered by pH was achieved using alumina nanoparticles in combination with a cationic surfactant. In acidic and neutral aqueous media, positively charged particles and the surfactant both at very low concentrations costabilize an oil-in-dispersion emulsion with the surfactant adsorbed at droplet interfaces and particles dispersed in the aqueous phase between the droplets. In alkaline media, however, particles become negatively charged and are hydrophobized in situ by adsorption of the surfactant to become surface-active and stabilize an O/W Pickering emulsion. The transition between the two is also possible by lowering the pH. The transformation can be achieved several times in a mixture of 0.1 wt % nanoparticles and 0.01 mM surfactant. This transition is significant, since particles can be made to either adsorb at the oil-water interface, which is beneficial for applications like biphasic catalysis, or remain dispersed in the aqueous phase, which is favorable for their recovery and reuse.

Magnetic separation of phosphate contaminants from starch wastewater using magnetic seeding

Traditional chemical precipitation of phosphates from wastewater is somewhat inefficient because it produces some ultrafine hydroxyapatite particles that are difficult to settle. In this study, magnetic seeds with a core-shell structure were prepared by sulfation roasting for magnetic flocculation of those fine particles. Zeta potential measurements show that the hydroxyapatite particles are positively charged at pH 10, whereas the magnetic seeds are negatively charged. The Derjaguin-Landau-Verwey-Overbeek calculation indicates that the van der Waals force between the magnetic seeds and hydroxyapatite particles is always attractive. Moreover, the electrostatic attraction also contributes to aggregation of the magnetic seeds and hydroxyapatite particles. Orthogonal experiments show that the main factor affecting the magnetic flocculation is the dosage of magnetic seeds, and polymeric ferric sulfate also plays an important role. Under the optimal magnetic flocculation experimental conditions, the turbidity of wastewater after magnetic separation was only 16.388 NTU, contributing to the removal of phosphate contaminants. Therefore, magnetic flocculation and magnetic separation may provide an alternative solution for efficient purification of phosphate-containing wastewater.

Antidiabetic activity enhancement in streptozotocin + nicotinamide-induced diabetic rats through combinational polymeric nanoformulation

Background: The bioactive compounds glycyrrhizin (GL) and thymoquinone (TQ) have been reported for antidiabetic activity in pure and nanoformulation (NF) form. However, the antidiabetic effect of a combined nanoformulation of these two has not been reported in the literature. Here, a combinational nanomedicine approach was investigated to enhance the antidiabetic effects of the two bioactive compounds of GL and TQ (GT), in type 2 diabetic rats in reference to metformin. Methods: Two separately prepared NFs of GL (using polymeric nanoparticles) and TQ (using polymeric nanocapsules) were mixed to obtain a therapeutic cargo of nanomedicine and then characterized with respect to particle size, stability, morphology, chemical interaction, and in vivo behavior. Additionally, NFs were evaluated for their cytotoxic effect on Vero cell lines compared to the pure form. This nanomedicine was administered orally, both independently and in combination (pure form or NF) for 21 successive days to type 2 diabetic rats and the effect assessed in term of body weight, fasting blood-glucose level, and various biochemical parameters (such as lipid-profile parameters and HbA_1c). Results: When these nanomedicines were applied in combined rather than individual forms, significant decreases in blood glucose and HbA_1c and significant improvements in body weight and lipid profile were observed, despite them containing lower amounts than the pure forms. The treatment of diabetic rats with GL and TQ, when administered independently in either pure or NF forms, did not lead to favorable trends in any studied parameters. Conclusion: The administration of combined GT NFs exhibited significant improvement in studied parameters. Improvements in antidiabetic activity could have been due to a synergistic effect of combined NFs, leading to enhanced absorption of NFs and lesser cytotoxic effects compared to pure bioactive compounds. Therefore, GT NFs demonstrated potential as a new medicinal agent for the management of diabetes.

The application of atomic force microscopy in mineral flotation

During the past years, atomic force microscopy (AFM) has matured to an indispensable tool to characterize nanomaterials in colloid and interface science. For imaging, a sharp probe mounted near to the end of a cantilever scans over the sample surface providing a high resolution three-dimensional topographic image. In addition, the AFM tip can be used as a force sensor to detect local properties like adhesion, stiffness, charge etc. After the invention of the colloidal probe technique it has also become a major method to measure surface forces. In this review, we highlight the advances in the application of AFM in the field of mineral flotation, such as mineral morphology imaging, water at mineral surface, reagent adsorption, inter-particle force, and bubble-particle interaction. In the coming years, the complementary characterization of chemical composition such as using infrared spectroscopy and Raman spectroscopy for AFM topography imaging and the synchronous measurement of the force and distance involving deformable bubble as a force sensor will further assist the fundamental understanding of flotation mechanism.

Floc behavior and removal mechanisms of cross-linked Durio zibethinus seed starch as a natural flocculant for landfill leachate coagulation-flocculation treatment

This study investigated the behavior and mechanisms of cross-linked Durio zibethinus seed starch (CDSS) flocculants for landfill leachate treatment. A physical-chemical treatment method of coagulation-flocculation process and starch modification were implemented in treating stabilized leachate from Matang Landfill, Perak, Malaysia. In practical, the removal performance of color, COD, suspended solid and turbidity for CDSS flocculants were evaluated by combining with primary coagulant of polyaluminium chloride (PAC). In this study, the application of crosslinking modification for Durio zibethinus seed waste starch flocculants showed good improvement. The impurities removal for colour, COD, suspended solid and turbidity were increased by the addition of CDSS flocculants. Furthermore, the average size of the floc was also increased from 60.24 µm to 89.5 µm. Despite, the addition of CDSS flocculants produced a reduction of PAC coagulant from 2700 mg/L to 2200 mg/L, with 500 mg/L reduction on the PAC dosage dependency. Therefore, these results affirmed the potentials of crosslinked modification for Durio zibethinus seed waste starch flocculants in landfill leachate treatment.

The pH dependent surface charging and points of zero charge. VII. Update

The pristine points of zero charge (PZC) and isoelectric points (IEP) of metal oxides and IEP of other materials from the recent literature, and a few older results (overlooked in previous searches) are summarized. This study is an update of the previous compilations by the same author [Surface Charging and Points of Zero Charge, CRC, Boca Raton, 2009; J. Colloid Interface Sci. 337 (2009) 439; 353 (2011) 1; 426 (2014) 209]. The field has been very active, but most PZC and IEP are reported for materials, which are very well-documented already (silica, alumina, titania, iron oxides). IEP of (nominally) Gd₂O₃, NaTaO₃, and SrTiO₃ have been reported in the recent literature. Their IEP were not reported in older studies.

The effect of conformational transition of gelatin-polysaccharide polyelectrolyte complex on its functional properties

The blends of gelatin and shear-thinning hydrocolloids (guar gum, kappa-carrageenan and xanthan gum) were examined to determine the effect of the conformational change on the functional properties of the solutions. The polyelectrolyte complexes of 0.5% gelatin/0.5% polysaccharide in 70 mM KCl or 70 mM NaCl were investigated by the laboratory rheometer and conductivity meter in the temperature range 25 - 45 °C. The rheological data were fitted by the power-law and Herschel-Bulkley model to obtain the flow parameters. The functional properties of the samples were substantially affected by the conformational change of the polysaccharide, as well as by the type of the hydrocolloid and salt solution. There was an evident change of viscosity and conductivity of the solutions upon heating, corresponding to the helix-coil transition of the polysaccharide at temperature about 35 °C. The type of the salt solvent had an effect on the gelation properties of the samples. Gelatin/kappa-carrageenan blend in NaCl provided a gel of high consistency at ambient temperature (20 - 25 °C), whereas the blend in KCl did not gel in the studied temperature range. The potential stability of the blends was determined by zeta-potential analysis. The low values of ζ-potential indicate that the gelatin/polysaccharide blends are electrically unstable systems which tend to coagulate. The mixtures of gelatin/polysaccharide electrostatic complexes may have a great potential in many food applications.

The role of interactions between abrasive particles and the substrate surface in chemical-mechanical planarization of Si-face 6H-SiC

The interactions between abrasive particles and the wafer surface play a significant role in the chemical-mechanical planarization (CMP) process.

The hydrophobic force for bubble–particle attachment in flotation – a brief review

Both exponential decay and power decay laws could be employed to quantitatively describe the hydrophobic force between bubble and particle.

CO2/N2 triggered switchable Pickering emulsions stabilized by alumina nanoparticles in combination with a conventional anionic surfactant

Switchable n-decane-in-water Pickering emulsions were prepared using positively charged alumina nanoparticles in combination with a trace amount of the anionic surfactant sodium dodecyl sulfate (SDS) and equal moles of a CO₂/N₂ switchable surfactant.

Preparation and in vitro evaluation of vaginal formulations including siRNA and paclitaxel-loaded SLNs for cervical cancer

Cervical cancer is one of the most life threatening types of cancer among women and is generally resistant to chemotherapy. The objective of this study was to prepare a vaginal suppository containing a chemotherapeutic agent and a genetic material that can be applied locally for cervical cancer. Paclitaxel was selected as the chemotherapeutic agent and siRNA which inhibits BCL-2 oncogene was selected as the genetic material. Bcl-2 siRNA, paclitaxel and paclitaxel/Bcl-2 siRNA combination were incorporated into solid lipid nanoparticles (SLNs) and were dispersed separately in vaginal suppositories prepared with PEG 6000. Physicochemical properties of SLNs, their cytotoxicities on HeLa cell lines and also the effect of SLNs on the total protein amount of the cells were examined followed by the investigation of release rates of the active materials from the SLNs prepared. Average diameters of all SLNs prepared were below 180nm with a positive zeta potential value between +22.20 and +48.16mV at the pH range of 4.2 and 7.4. The release of Bcl-2 siRNA from SLNs incorporated Bcl-2 siRNA and the release of paclitaxel (PTX) from PTX incorporated SLNs were completed within 12h and 36h. SLNs incorporating Bcl-2 siRNA and paclitaxel/Bcl-2 siRNA were found to be more toxic when compared to paclitaxel incorporated SLN and placebo SLN. The disintegration of the vaginal suppositories as well as the release of the SLNs was completed within 2 h. This study indicates that vaginal suppository containing SLNs can bring the advantages of the simultaneous delivery of paclitaxel and siRNA via vaginal route with no help from professionals.

Rapid and high-capacity adsorption of sulfonated anionic dyes onto basic bismuth(iii) nitrate via bidentate bridging and electrostatic attracting interactions

Rapid and high-capacity adsorption of sulfonated anionic dyes onto basic bismuth(iii) nitrate via bidentate bridging and electrostatic attractive interactions.