Controlled delivery of stromal derived factor-1α from poly lactic-co-glycolic acid core-shell particles to recruit mesenchymal stem cells for cardiac regeneration

Vitamin D3-incorporated chitosan/collagen/fibrinogen scaffolds promote angiogenesis and endothelial transition via HIF-1/IGF-1/VEGF pathways in dental pulp stem cells

Effective vascularization during wound healing remains a critical challenge in the regeneration of skin tissue. On the other hand, mesenchymal stem cell (MSC) to endothelial phenotype transition (MEnDoT) is a potential phenomenon grossly underexplored in vascularized skin tissue engineering. Vitamin D3 has a proven role in promoting MEnDoT. Hence, a D3-incorporated scaffold made with biocompatible materials such as chitosan, collagen and fibrinogen should be able to promote endothelial lineage transition in vitro for tissue engineering purposes. In this study, we developed vitamin D3 incorporated chitosan-collagen-fibrinogen (CCF-D3) scaffolds physically crosslinked under UV and conducted thorough physicochemical and biological assays on it compared to a control scaffold without vitamin D3. Our study for the first time reports the potential vascularization property of the CCF-D3 scaffold by inducing the transitions of dental pulp MSC to endothelial lineage via the HIF-1/IGF-1/VEGF pathways. MSC seeded on UV-exposed CCF-D3 scaffolds had higher cell viability and transitioned towards endothelial lineage was observed by elevated proliferative and endothelial-specific gene expressions and flow cytometric analysis of SCA-1+ antibody. The difference in VEGF-A and α-SMA expressions was also observed in the D3-CCF scaffold compared to the scaffolds without D3.

Ultrasound-targeted semaglutide-loaded PEG-nanoliposomes microbubble destruction protects diabetic cardiomyopathy by activating PI3K/Akt/Nrf2 signaling pathway

Objective

To investigate the ameliorative effect of Semaglutide-loaded PEG-nanoliposomes (Sem-PEG-lips) combined with ultrasound-targeted microbubble destruction (UTMD) on streptozotocin (STZ)-induced diabetic cardiomyopathy (DCM) in rodents and its potential mechanisms.

Methods

Sem-PEG-lips were prepared by the reverse phase evaporation method. Fifty STZ-induced diabetic rats were randomly divided into DCM model group, Sem or Sem-PEG-lips alone treatment group, UTMD + Sem group and UTMD + Sem-PEG-lips group (n = 10), respectively, and used the healthy rats as normal control. During the 12-week intervention, the weight and blood glucose levels of all rats were recorded. Myocardial injury and fibrosis were observed by using H&E and Masson staining. The activity of antioxidant enzymes and the expression levels of oxidative stress-related signaling pathway markers in myocardial tissues were measured by ELISA and western blotting method, respectively.

Results

Compared with DCM rats, the body weight and blood glucose levels of those in the UTMD + Sem-PEG-lips group were significantly increased and decreased, respectively (both p < 0.05). The results of H&E and Masson staining showed that myocardial fibrosis and apoptosis were both significantly improved in combination group (both p < 0.001). Further results of ELISA and Western blot analysis showed that the activity of antioxidant enzymes in ones received combination therapy were significantly higher than that in DCM model group (all p < 0.001), and the expression of PI3K/Akt/Nrf2 signaling pathway related proteins were significantly up-regulated (all p < 0.001), and all these changes were reversed by the treatment of PI3K inhibitor. results.

Conclusion

UTMD combined Sem-PEG-lips can reduce the oxidative stress of myocardial tissue in DCM rats by activating PI3K/Akt/Nrf2 signaling pathway, thereby improving diabetic myocardial injury.

The Effect of Dosing of Stromal Cell-Derived Factor 1 on Anal Sphincter Regeneration

Aim: The aim of this study is to investigate if a high dose of the stromal cell-derived factor-1 (SDF-1) plasmid improves outcome in a minipig model of chronic anal sphincter injury. Methods: Twenty-two female minipigs underwent excision of the posterior hemicircumference of the anal sphincter complex and were allowed to recover for 6 weeks. They were randomly allocated (n = 6) to receive either 5% dextrose (sham) or 2, 4, or 8 mg of SDF-1 plasmid at the defect site. Two control pigs received no surgery/treatment. Outcome measures included anal manometry at preinjury/pretreatment and 2, 4, and 8 weeks after treatment, recording the mean of eight pressure channels and the posterior channel alone, histopathology using Masson's trichrome, and immunohistochemistry using PGP9.5 for staining of neural structures, and CY3 staining for blood vessels. Data are expressed as mean ± standard error. Manometry analysis used two-way analysis of variance (ANOVA) followed by the Holm-Sidak test. Quantification of muscle/fibrosis was analyzed with a Kruskal-Wallis one-way ANOVA on ranks. Results: Posterior anal pressures were significantly decreased in sham treated animals compared with controls (p = 0.04). In contrast, mean anal pressures at the four time points were not significantly different between groups (p > 0.05). The defect area of the sham treated group showed irregular muscle bundles, while all three SDF-1 treatment groups show organized muscle bundles, with the most organization in the higher dose groups. Quantification of Masson-stained slides showed no statistically significant differences between groups, but did show increased muscle volume in the area of defect in the treatment groups compared with sham. PGP9.5 and CY3 staining showed increased fluorescence in the higher dose groups compared with sham treatment. Conclusion: A single higher dose of the plasmid encoding SDF-1 may increase muscle volume in the area of a chronic defect. Impact statement Fecal or bowel incontinence as a result of a torn anal sphincter complex remains undetected for many years. The resulting defect does not respond well to surgical repair. Regenerating the anal sphincter complex with functional muscle has been a long-term goal. Stem cells home to a site of a chronic injury and cause regeneration when a cell signaling mechanism is available. Stromal cell-derived factor-1 is one such cytokine that has been well researched by us and others to have this effect. It is easy to use clinically and has been used in other applications in humans and considered safe.

Effects of Low-Intensity Pulsed Ultrasound on the Migration and Homing of Human Amnion-Derived Mesenchymal Stem Cells to Ovaries in Rats With Premature Ovarian Insufficiency

Premature ovarian insufficiency (POI) can cause multiple sequelae and is currently incurable. Mesenchymal stem cell (MSC) transplantation might provide an effective treatment method for POI. However, the clinical application of systemic MSC transplantation is limited by the low efficiency of cell homing to target tissue in vivo, including systemic MSC transplantation for POI treatment. Thus, exploration of methods to promote MSC homing is necessary. This study was to investigate the effects of low-intensity pulsed ultrasound (LIPUS) on the migration and homing of transplanted human amnion–derived MSCs (hAD-MSCs) to ovaries in rats with chemotherapy-induced POI. For LIPUS treatment, hAD-MSCs were exposed to LIPUS or sham irradiation. Chemokine receptor expressions in hAD-MSCs were detected by polymerase chain reaction (PCR), Western blot, and immunofluorescence assays. hAD-MSC migration was detected by wound healing and transwell migration assays. Cyclophosphamide-induced POI rat models were established to evaluate the effects of LIPUS on the homing of systemically transplanted hAD-MSCs to chemotherapy-induced POI ovaries in vivo. We found that hAD-MSCs expressed chemokine receptors. The LIPUS promoted the expression of chemokine receptors, especially CXCR4, in hAD-MSCs. SDF-1 induced hAD-MSC migration. The LIPUS promoted hAD-MSC migration induced by SDF-1 through SDF-1/CXCR4 axis. SDF-1 levels significantly increased in ovaries induced by chemotherapy in POI rats. Pretreating hAD-MSCs with LIPUS increased the number of hAD-MSCs homing to ovaries in rats with chemotherapy-induced POI to some extent. However, the difference was not significant. Both hAD-MSC and LIPUS-pretreated hAD-MSC transplantation reduced ovarian injuries and improved ovarian function in rats with chemotherapy-induced POI. CXCR4 antagonist significantly reduced the number of hAD-MSCs- and LIPUS-pretreated hAD-MSCs homing to POI ovaries, and further reduced their efficacy in POI treatment. According to these findings, pretreating MSCs with LIPUS before transplantation might provide a novel, convenient, and safe technique to explore for improving the homing of systemically transplanted MSCs to target tissue.

Recent progress in nanocomposites of carbon dioxide fixation derived reproducible biomedical polymers

In recent years, the environmental problems accompanying the extensive application of biomedical polymer materials produced from fossil fuels have attracted more and more attentions. As many biomedical polymer products are disposable, their life cycle is relatively short. Most of the used or overdue biomedical polymer products need to be burned after destruction, which increases the emission of carbon dioxide (CO₂). Developing biomedical products based on CO₂ fixation derived polymers with reproducible sources, and gradually replacing their unsustainable fossil-based counterparts, will promote the recycling of CO₂ in this field and do good to control the greenhouse effect. Unfortunately, most of the existing polymer materials from renewable raw materials have some property shortages, which make them unable to meet the gradually improved quality and property requirements of biomedical products. In order to overcome these shortages, much time and effort has been dedicated to applying nanotechnology in this field. The present paper reviews recent advances in nanocomposites of CO₂ fixation derived reproducible polymers for biomedical applications, and several promising strategies for further research directions in this field are highlighted.

Development of stimulus-sensitive electrospun membranes based on novel biodegradable segmented polyurethane as triggered delivery system for doxorubicin

In this work, redox-sensitive polyurethane urea (PUU) based electrospun membranes have been exploited to chemically tether a pH-sensitive doxorubicin derivative achieved by linking a lipoyl hydrazide to the drug via a hydrazone linkage. First, the lipoyl-hydrazone-doxorubicin derivative labelled as LA-Hy-Doxo has been synthesized and characterized. Then, the molecule has been tethered, via a thiol-disulfide exchange reaction, to the redox-sensitive PUU (PolyCEGS) electrospun membrane. The redox-sensitive PolyCEGS PUU has been produced by using PCL-PEG-PCL polyol and glutathione-tetramethyl ester (GSSG-OMe)₄ as a chain extender. The LA-Hy-Doxo tethered electrospun membrane has showed a dually controlled release triggered by acidic and reducing conditions, producing a significant cytotoxic effect in human breast cancer cell lines (MCF-7) which has validated the system for the post-surgical treatment of solid tumors to contrast recurrence.

Modifying strategies for SDF-1/CXCR4 interaction during mesenchymal stem cell transplantation

Mesenchymal stem cell (MSC) transplantation is regarded as a promising candidate for the treatment of ischaemic heart disease. The major hurdles for successful clinical translation of MSC therapy are poor survival, retention, and engraftment in the infarcted heart. Stromal cell-derived factor-1/chemokine receptor 4 (SDF-1/CXCR4) constitutes one of the most efficient chemokine/chemokine receptor pairs regarding cell homing. In this review, we mainly focused on previous studies on how to regulate the SDF-1/CXCR4 interaction through various priming strategies to maximize the efficacy of mesenchymal stem cell transplantation on ischaemic hearts or to facilitate the required effects. The strengthened measures for enhancing the therapeutic efficacy of the SDF-1/CXCR4 interaction for mesenchymal stem cell transplantation included the combination of chemokines and cytokines, hormones and drugs, biomaterials, gene engineering, and hypoxia. The priming strategies on recipients for stem cell transplantation included ischaemic conditioning and device techniques.

Sodium alginate/collagen/stromal cell-derived factor-1 neural scaffold loaded with BMSCs promotes neurological function recovery after traumatic brain injury

Stem cell therapy is promising for neural repair in devastating traumatic brain injury (TBI). However, the low survival and differentiation rates of transplanted stem cells are main obstacles to efficient stem cell therapy in TBI. Stromal cell-derived factor-1 (SDF-1) and its receptor CXCR4 are key factors that regulate the survival, recruitment, and differentiation of stem cells. Herein, we synthesized a sodium alginate (SA)/collagen type I (Col)/SDF-1 hydrogel and investigated whether the SA/Col/SDF-1 hydrogel loaded with bone marrow-derived mesenchymal stem cells (BMSCs) had therapeutic effects on a TBI model. Our results showed that the SA/Col/SDF-1 scaffold could stably release SDF-1 and provide biocompatible and biodegradable microenvironment for the survival, migration, and neuronal differentiation of BMSCs in vitro. In a rat model of TBI, the SA/Col/SDF-1 hydrogel loaded with BMSCs significantly ameliorated motor and cognition dysfunction and relieved anxiety and depressive-like behaviors. In addition, the BMSCs/SA/Col/SDF-1 scaffold reduced brain lesions and neuronal cell death and mitigated neuroinflammation. Further studies demonstrated that the BMSCs/SA/Col/SDF-1 hydrogel promoted the migration of BMSCs in the lesions and partly enhanced neurogenesis by activating the SDF-1/CXCR4-mediated FAK/PI3K/AKT pathway. Taken together, our results indicate that the SA/Col/SDF-1 scaffold loaded with BMSCs exerts neuroreparative effects in a TBI rat model, and thus, it may serve as an alternative neural regeneration scaffold for brain injury repair. STATEMENT OF SIGNIFICANCE: Hydrogel facilitates the biological behaviors of transplanted stem cells for tissue regeneration. In this study, we synthesized sodium alginate (SA)/collagen type I (Col)/ scaffold to simultaneously deliver stromal cell derived factor-1 (SDF-1) and bone marrow mesenchymal stem cells (BMSCs) in a rat model of traumatic brain injury (TBI). We found that the SA/Col/SDF-1 hydrogel could continuously release SDF-1 and was conducive to the survival, migration and neuronal differentiation of BMSCs in vitro. In addition, the SA/Col/SDF-1 hydrogel loaded with BMSCs significantly ameliorated neurological deficits, mitigated neuroinflammation, promoted the recruitment of BMSCs and enhanced neurogenesis in TBI partly by activating the SDF-1/CXCR4-mediated FAK/PI3K/AKT pathway. Our results may serve as an alternative neural regeneration strategy for brain injury.

Biologics and their delivery systems: Trends in myocardial infarction

Cardiovascular disease is the leading cause of death around the world, in which myocardial infarction (MI) is a precipitating event. However, current therapies do not adequately address the multiple dysregulated systems following MI. Consequently, recent studies have developed novel biologic delivery systems to more effectively address these maladies. This review utilizes a scientometric summary of the recent literature to identify trends among biologic delivery systems designed to treat MI. Emphasis is placed on sustained or targeted release of biologics (e.g. growth factors, nucleic acids, stem cells, chemokines) from common delivery systems (e.g. microparticles, nanocarriers, injectable hydrogels, implantable patches). We also evaluate biologic delivery system trends in the entire regenerative medicine field to identify emerging approaches that may translate to the treatment of MI. Future developments include immune system targeting through soluble factor or chemokine delivery, and the development of advanced delivery systems that facilitate the synergistic delivery of biologics.

Chemokine SDF1 Mediated Bone Regeneration Using Biodegradable Poly(D,L-lactide-co-glycolide) 3D Scaffolds and Bone Marrow-Derived Mesenchymal Stem Cells: Implication for the Development of an "Off-the-Shelf" Pharmacologically Active Construct

There is an increasing need for bone substitutes for reconstructive orthopedic surgery following removal of bone tumors. Despite the advances in bone regeneration, the use of autologous mesenchymal stem cells (MSC) presents a significant challenge, particularly for the treatment of large bone defects in cancer patients. This study aims at developing new chemokine-based technology to generate biodegradable scaffolds that bind pharmacologically active proteins for regeneration/repair of target injured tissues in patients. Primary MSC were cultured from the uninvolved bone marrow (BM) of cancer patients and further characterized for "stemness". Their ability to differentiate into an osteogenic lineage was studied in 2D cultures as well as on 3D macroporous PLGA scaffolds incorporated with biomacromolecules bFGF and homing factor chemokine stromal-cell derived factor-1 (SDF1). MSC from the uninvolved BM of cancer patients exhibited properties similar to that reported for MSC from BM of healthy individuals. Macroporous PLGA discs were prepared and characterized for pore size, architecture, functional groups, thermostability, and cytocompatibility by ESEM, FTIR, DSC, and CCK-8 dye proliferation assay, respectively. It was observed that the MSC+PLGA+bFGF+SDF1 construct cultured for 14 days supported significant cell growth, osteo-lineage differentiation with increased osteocalcin expression, alkaline phosphatase secretion, calcium mineralization, bone volume, and soluble IL6 compared to unseeded PLGA and PLGA+MSC, as analyzed by confocal microscopy, biochemistry, ESEM, microCT imaging, flow cytometry, and EDS. Thus, chemotactic biomacromolecule SDF1-guided tissue repair/regeneration ability of MSC from cancer patients opens up the avenues for development of "off-the-shelf" pharmacologically active construct for optimal repair of the target injured tissue in postsurgery cancer patients, bone defects, damaged bladder tissue, and radiation-induced skin/mucosal lesions.

Protein encapsulation by electrospinning and electrospraying

Given the increasing interest in the use of peptide- and protein-based agents in therapeutic strategies, it is fundamental to develop delivery systems capable of preserving the biological activity of these molecules upon administration, and which can provide tuneable release profiles. Electrohydrodynamic (EHD) techniques, encompassing electrospinning and electrospraying, allow the generation of fibres and particles with high surface area-to-volume ratios, versatile architectures, and highly controllable release profiles. This review is focused on exploring the potential of different EHD methods (including blend, emulsion, and co-/multi-axial electrospinning and electrospraying) for the development of peptide and protein delivery systems. An overview of the principles of each technique is first presented, followed by a survey of the literature on the encapsulation of enzymes, growth factors, antibodies, hormones, and vaccine antigens using EHD approaches. The possibility for localised delivery using stimuli-responsive systems is also explored. Finally, the advantages and challenges with each EHD method are summarised, and the necessary steps for clinical translation and scaled-up production of electrospun and electrosprayed protein delivery systems are discussed.

Biodegradable Nanopolymers in Cardiac Tissue Engineering: From Concept Towards Nanomedicine

Cardiovascular diseases are the number one cause of heart failure and death in the world, and the transplantation of the heart is an effective and viable choice for treatment despite presenting many disadvantages (most notably, transplant heart availability). To overcome this problem, cardiac tissue engineering is considered a promising approach by using implantable artificial blood vessels, injectable gels, and cardiac patches (to name a few) made from biodegradable polymers. Biodegradable polymers are classified into two main categories: natural and synthetic polymers. Natural biodegradable polymers have some distinct advantages such as biodegradability, abundant availability, and renewability but have some significant drawbacks such as rapid degradation, insufficient electrical conductivity, immunological reaction, and poor mechanical properties for cardiac tissue engineering. Synthetic biodegradable polymers have some advantages such as strong mechanical properties, controlled structure, great processing flexibility, and usually no immunological concerns; however, they have some drawbacks such as a lack of cell attachment and possible low biocompatibility. Some applications have combined the best of both and exciting new natural/synthetic composites have been utilized. Recently, the use of nanostructured polymers and polymer nanocomposites has revolutionized the field of cardiac tissue engineering due to their enhanced mechanical, electrical, and surface properties promoting tissue growth. In this review, recent research on the use of biodegradable natural/synthetic nanocomposite polymers in cardiac tissue engineering is presented with forward looking thoughts provided for what is needed for the field to mature.

Evaluation of bone-regeneration effects and ectopic osteogenesis of collagen membrane chemically conjugated with stromal cell-derived factor-1 in vivo

Because the collagen membrane lacks osteoinductivity, it must be modified with bioactive components to trigger rapid bone regeneration. In this study, we aimed to evaluate the bone regeneration effects of a collagen membrane chemically conjugated with stromal cell-derived factor-1 alpha (SDF-1α) in rat models. To this end, different collagen membranes from four groups including a control group with a Bio-Oss bone substitute + collagen membrane; physical adsorption group with Bio-Oss + SDF-1α physically adsorbed on the collagen membrane; chemical cross-linking group with Bio-Oss + SDF-1α chemically cross-linked to the collagen membrane; and cell-seeding group with Bio-Oss + bone marrow mesenchymal stem cells (BMSCs) seeded onto the collagen membrane were placed in critical-sized defect models using a guided bone regeneration technique. At 4 and 8 weeks, the specimens were analyzed by scanning electron microscopy, energy-dispersive x-ray spectroscopy, micro-computed tomography, and histomorphology analyzes. Furthermore, ectopic osteogenesis was examined by histological analysis with Von Kossa staining, with the samples counterstained by hematoxylin and eosin and immunohistochemical staining. The results showed that in the chemical cross-linking group and cell-seeding group, the bone volume fraction, bone surface area fraction, and trabecular number were significantly increased and showed more new bone formation compared to the control and physical adsorption groups. Von Kossa-stained samples counterstained with hematoxylin and eosin and subjected to immunohistochemical staining of 4-week implanted membranes revealed that the chemical cross-linking group had the largest number of microvessels. The collagen membrane chemically conjugated with SDF-1α to significantly promote new bone and microvessel formation compared to SDF-1α physical adsorption and showed similar effects on new bone formation as a BMSC seeding method. This study provided a cell-free approach for shortening the bone healing time and improving the success rate of guided bone regeneration.

Nucleic Acid-Based Dual Cross-Linked Hydrogels for in Situ Tissue Repair via Directional Stem Cell Migration

In situ tissue repair holds great potential as a cell-free regenerative strategy. A critical aspect of this approach is the selection of cell instructive materials that can efficiently regulate the defect microenvironment via the release of chemoattractant factors to mobilize and recruit endogenous stem cells toward the site of implantation. Here we report the design of a DNA-based hydrogel as a drug delivery platform for the sustained release of a promising chemoattractant, SDF-1α. The hydrogel is composed of chemically cross-linked DNA strands, which are bridged via silicate nanodisks (nSi). Silicate nanodisks electrostatically interact with the negatively charged DNA backbone resulting in the formation of a dual cross-linked nanocomposite hydrogel with a combination of chemical and physical cross-link points. The formulated nanocomposites display enhanced elasticity and mechanical toughness as compared to their nonsilicate containing counterparts. Moreover, the electrostatic interaction between nSi and SDF-1α leads to sustained release of the chemokine from the hydrogels. The in vitro bioactivity assays confirm the retention of chemotactic properties of the protein after its release. Overall, the dual cross-linked DNA-based hydrogel platform could be potentially used as a cell-instructive material for the recruitment of host stem cells to guide the process of in situ tissue repair.

Reversing the Tumor Target: Establishment of a Tumor Trap

Despite the tremendous progress made in the field of cancer therapy in recent years, certain solid tumors still cannot be successfully treated. Alongside classical treatments in the form of chemotherapy and/or radiotherapy, targeted treatments such as immunotherapy that cause fewer side effects emerge as new options in the clinics. However, these alternative treatments may not be useful for treating all types of cancers, especially for killing infiltrative and circulating tumor cells (CTCs). Recent advances pursue the trapping of these cancer cells within a confined area to facilitate their removal for therapeutic and diagnostic purposes. A good understanding of the mechanisms behind tumor cell migration may drive the design of traps that mimic natural tumor niches and guide the movement of the cancer cells. To bring this trapping idea into reality, strong efforts are being made to create structured materials that imitate myelinated fibers, blood vessels, or pre-metastatic niches and incorporate chemical cues such as chemoattractants or adhesive proteins. In this review, the different strategies used (or could be used) to trap tumor cells are described, and relevant examples of their performance are analyzed.

Electrospray for generation of drug delivery and vaccine particles applied in vitro and in vivo

Also known as electrospray, electrohydrodynamic atomization has been used extensively in the last 15 years to develop polymer-based particles for drug delivery in cell and animal models. More recently, novel core-shell, multi-axial, and other electrospray particles have been developed from an array of polymers for a variety of biomedical applications. This review focuses on electrospray as a novel method of particle fabrication for drug delivery, specifically highlighting the applications of these particle systems in cell culture and animal models while also discussing polymers used for particle fabrication. Applications of electrospray particles to treat glioma, ovarian cancer, and breast cancer are reviewed. Additionally, delivery of antibiotics, gene therapy, and bacterial cells formulated in electrospray particles is discussed. Finally, vaccines as well as drug eluting particles for differentiation of stem cells and tissue engineering are highlighted. The article concludes with a discussion of where the future of electrospray technology can go to strengthen its foothold in the biomedical field.

Electrospraying: Possibilities and Challenges of Engineering Carriers for Biomedical Applications-A Mini Review

Electrospraying, a liquid atomization-based technique, has been used to produce and formulate micro/nanoparticular cargo carriers for various biomedical applications, including drug delivery, biomedical imaging, implant coatings, and tissue engineering. In this mini review, we begin with the main features of electrospraying methods to engineer carriers with various bioactive cargos, including genes, growth factors, and enzymes. In particular, this review focuses on the improvement of traditional electrospraying technology for the fabrication of carriers for living cells and providing a suitable condition for gene transformation. Subsequently, the major applications of the electrosprayed carriers in the biomedical field are highlighted. Finally, we finish with conclusions and future perspectives of electrospraying for high efficiency and safe production.

Defined Substrate by Aptamer Modification with the Balanced Properties of Selective Capture and Stemness Maintenance of Mesenchymal Stem Cells

The recruitment of endogenous mesenchymal stem cells (MSCs), as an alluring approach for in situ tissue regeneration, always accompanies with other types of cells. Therefore, it is of enormous value to bestow a substrate with the property of selective capture to MSCs. However, it was reported that when MSCs are cultured on a substrate with excessive affinity, their stemness diminished. Therefore, constructing a substrate with the balanced ability of selective capture and stemness maintenance becomes a big challenge. In this study, an Aptamer 19S (Apt19S)-modified substrate was fabricated by grafting Apt19S on a PEGylated glass substrate. The X-ray photoelectron spectroscopy results verified that the antifouling poly(ethylene glycol) (PEG) layer was created. Tracking by ellipsometry, the thicknesses of PEG layers were proved to increase with PEG concentration. The results of the quartz crystal microbalance also validated that the Apt19S densities could be modulated by the concentrations of the Apt19S solution. The results of the cell adhesion assay indicated that the modification of Apt19S caused a significant increase in the adhesion ratio and area of rBMSCs. Selective adhesion was confirmed by coculture of rBMSCs with macrophages and NIH3T3 cells, demonstrating that a higher proportion of rBMSCs adhered to the Apt19S-modified substrate. The results of specific capture were further confirmed by a flow model to simulate the body fluid flow. The comprehensive results of reverse transcription polymerase chain reaction, immunofluorescence staining, proliferation capacity, and differentiation assay showed that the stemness of rBMSCs was maintained better on a substrate with the appropriate Apt19S density. All of these results indicated that Apt19S modification is an effective strategy to endow a substrate with the specific capture ability of MSCs, and the balance between selective capture and stemness maintenance can be achieved by the precise regulation of the aptamer density.

Experimental investigation into size and sphericity of alginate micro-beads produced by electrospraying technique: Operational condition optimization

Alginate spherical hydrogel beads have several applications in biomedical and biological processes in which the bead size and sphericity are critical factors affecting mass transfer phenomena. Electrospraying technology facilitates generation of small and almost uniform beads with higher diffusion rate resulting in process performance improvement. There are several key factors affecting particle size and shape behavior of electrosprayed alginate beads meanwhile interactions between these factors introduce complexity in determining appropriate conditions to produce spherical beads with the size of interest. Thus, the need to achieve reliable products has put growing emphasis on the use of modeling methodology to establish correlations between particle size and affecting variables as well as sphericity coefficient and meaningful factors. Obviously, a more applicable model based on intentionally manipulatable factors would spark a great deal of interest for practical engineering applications. In this regard we employed a central composite design (CCD) and response surface methodology (RSM) to model the diameter and sphericity coefficient of electrosprayed alginate beads for the first time. Two quadratic models were obtained in which the effectiveness order of the variables were found. We could benefit from this RSM-based empirical model not only for better understanding the complex physics of the electrospraying process, but also for selection of factors and their levels to produce alginate micro-beads with appropriate size and sphericity. The results indicate that the alginate concentration, voltage and needle size have the strongest influence on both response variables. The quite spherical beads with a minimum size of 130 μm can be obtained at alginate concentration of 1.5%, voltage of 11 kV, and needle size of 26 G.

Localized SDF-1α Delivery Increases Pro-Healing Bone Marrow-Derived Cells in the Supraspinatus Muscle Following Severe Rotator Cuff Injury

To examine how the chemotactic agent stromal cell-derived factor-1alpha (SDF-1α) modulates the unique cellular milieu within rotator cuff muscle following tendon injury, we developed an injectable, heparin-based microparticle platform to locally present SDF-1α within the supraspinatus muscle following severe rotator cuff injury. SDF-1α loaded, degradable, N-desulfated heparin-based microparticles were fabricated, injected into a rat model of severe rotator cuff injury, and were retained for up to 7 days at the site. The resultant inflammatory cell and mesenchymal stem cell populations were analyzed compared to uninjured contralateral controls and, after 7 days, the fold-change in anti-inflammatory, M2-like macrophages (CD11b+CD68+CD163+, 4.3X fold-change) and mesenchymal stem cells (CD29+CD44+CD90+, 3.0X, respectively) was significantly greater in muscles treated with SDF-1α loaded microparticles than unloaded microparticles or injury alone. Our results indicate that SDF-1α loaded microparticles may be a novel approach to shift the cellular composition within the supraspinatus muscle and create a more pro-regenerative milieu, which may provide a platform to improve muscle repair following rotator cuff injury in the future.

Selective capture of mesenchymal stem cells over fibroblasts and immune cells on E7-modified collagen substrates under flow circumstances

A substrate with selective capture of MSCs (BMSCs) over fibroblasts (NIH3T3 cells) and immune cells (RAW264.7 cells) was developed by conjugating E7 peptides on collagen substrates.

RhBMP-2-loaded Poly(lactic-co-glycolic acid) microspheres fabricated by coaxial electrospraying for protein delivery

In this study, we fabricated recombinant human bone morphogenetic protein-2 (rhBMP-2) loaded Poly(lactic-co-glycolic acid) (PLGA) microspheres with core-shell structures and particle sizes ranging from 2.5 to 8 μm by coaxial electrospraying. The manufacturing process of core-shell microspheres by coaxial electrospraying is simpler than that with other methods, and a smaller diameter can be obtained. The microspheres were analyzed by environmental scanning electron microscopy, transmission electron microscopy (TEM), and laser scanning confocal microscopy (LSCM). Moreover, the drug release profiles and degradation of rhBMP-2-loaded PLGA microspheres in vitro were investigated for 21 days and for 7 weeks, respectively. The rhBMP-2 was stabilized by using bovine serum albumin (BSA) to ensure protein activity in the electrospraying process. Fluorescently labeled protein that was loaded into the core-shell PLGA microspheres was verified by LSCM. The distinct layered structure that existed in the manufactured core-shell microspheres can be observed by TEM. Cell Counting Kit-8 (CCK-8) indicated that the core-shell PLGA microspheres loaded with rhBMP-2 have great potential for the treatment of bone defects, for bone regeneration, and in bone tissue engineering.

Spatiotemporal presentation of exogenous SDF-1 with PLGA nanoparticles modulates SDF-1/CXCR4 signaling axis in the rodent cortex

Stromal cell-derived factor-1 (SDF-1) and its key receptor CXCR4 have been implicated in directing cellular recruitment for several pathological/disease conditions thus also gained considerable attention for regenerative medicine. One regenerative approach includes sustained release of SDF-1 to stimulate prolonged stem cell recruitment. However, the impact of SDF-1 sustained release on the endogenous SDF-1/CXCR4 signaling axis is largely unknown as auto-regulatory mechanisms typically dictate cytokine/receptor signaling. We hypothesize that spatiotemporal presentation of exogenous SDF-1 is a key factor in achieving long-term manipulation of endogenous SDF-1/CXCR4 signaling. Here in the present study, we sought to probe our hypothesis using a transgenic mouse model to contrast the spatial activation of endogenous SDF-1 and CXCR4 in response to exogenous SDF-1 injected in bolus or controlled release (PLGA nanoparticles) form in the adult rodent cortex. Our data suggests that the manner of SDF-1 presentation significantly affected initial CXCR4 cellular activation/recruitment despite having similar protein payloads over the first 24 h (∼30 ng for both bolus and sustained release groups). Yet, one week post-injection, this response was negligible. Therefore, the transient nature CXCR4 recruitment/activation in response to bolus or controlled release SDF-1 indicated that cytokine/receptor auto-regulatory mechanisms may demand more complex release profiles (i.e. delayed and/or pulsed release) to achieve sustained cellular response.

Delivery of stromal cell-derived factor 1α for in situ tissue regeneration

In situ tissue regeneration approach aims to exploit the body's own biological resources and reparative capability and recruit host cells by utilizing cell-instructive biomaterials. In order to immobilize and release bioactive factors in biomaterials, it is important to engineer the load effectiveness, release kinetics and cell recruiting capabilities of bioactive molecules by using suitable bonding strategies. Stromal cell-derived factor 1α (SDF-1α) is one of the most potent chemokines for stem cell recruitment, and SDF-1α-loaded scaffolds have been used for the regeneration of many types of tissues. This review summarizes the strategies to incorporate SDF-1α into scaffolds, including direct loading or adsorption, polyion complexes, specific heparin-mediated interaction and particulate system, which may be applied to the immobilization of other chemokines or growth factors. In addition, we discuss the application of these strategies in the regeneration of tissues such as blood vessel, myocardium, cartilage and bone.

Fabrication of ultrasound-responsive microbubbles via coaxial electrohydrodynamic atomization for triggered release of tPA

A single-step fabrication method, coaxial electrohydrodynamic atomization (CEHDA), was developed to synthesize drug-loaded microbubbles (MBs) for combination treatment of ischemic stroke. The bioactivity of therapeutic agent (tPA, tissue plasminogen activator) after preparation was evaluated, showing that CEHDA could be very promising method for producing MBs with therapeutic functions. The bubble performance and tPA release profiles were also examined by exposing the bubbles to 2MHz ultrasound of various intensities. The results showed that the mean diameter of tPA-loaded MBs was found to fluctuate about its original diameter when exposed to ultrasound and higher intensity ultrasound was more effective in triggering the burst of CEHDA MBs. High ultrasound-triggered bubble disintegration effectiveness in a short period (first 5min) fits well with the requirement of short ultrasound exposure time for human brain. Moreover, a numerical model was also applied to investigate the stability of the fabricated MBs in the bloodstream. It was found that MB dissolution time increased with initial radius, decreased with initial surface tension and increased with initial shell resistance but it was barely affected by the average excessive bloodstream pressure.

Investigation of Human Dental Pulp Cells on a Potential Injectable Poly(lactic-co-glycolic acid) Microsphere Scaffold

INTRODUCTION

Poly(lactic-co-glycolic acid) (PLGA) has been extensively explored in the tissue engineering field with good biocompatibility and biodegradability. PLGA microspheres' injectable potency makes it highly desirable in dentin-pulp complex regeneration. Therefore, we investigated the cell adhesion, proliferation, odontogenic differentiation, and matrix mineralization of human dental pulp cells (HDPCs) on a PLGA microsphere scaffold. We hypothesized that this scaffold might be suitable for dentin-pulp complex regeneration.

METHODS

PLGA microsphere scaffolds were fabricated using the double-emulsion solvent extraction technique with or without type I collagen surface modification. HDPCs were isolated from freshly extracted premolar or third molar teeth with patients' informed consent and ethical approval. Fourth-passage HDPCs (1 × 10⁵ cells/ml) were seeded onto surface-modified or -unmodified PLGA microspheres and cultured in vitro. Cell adhesion, proliferation, and alkaline phosphatase activity were evaluated at different time points. Odontogenic-related gene expression (DMP1, DSPP, COL1, OPN, and OCN) were analyzed using quantitative real-time polymerase chain reaction. After 8 weeks of culture, samples were observed under scanning electron microscopy.

RESULTS

Surface modification using type I collagen significantly enhanced HDPC attachment to the PLGA microspheres and promoted cell spreading. Alkaline phosphatase activity and odontogenic-related gene expression of HDPCs cultured with PLGA microsphere scaffolds were enhanced significantly compared with HDPCs cultured without PLGA microsphere scaffolds. After 8 weeks of culture, HDPCs combined with PLGA microspheres formed 3-dimensional structures. Partial degradation of the scaffolds and matrix mineralization were also observed.

CONCLUSIONS

HDPCs can adhere to the PLGA microspheres, proliferate and differentiate into odontoblastlike cells, and form a 3-dimensional complex with matrix mineralization. This study may provide insight into the clinical dentin-pulp complex restoration with HDPCs and PLGA microsphere constructs.

Acetalated Dextran Microparticulate Vaccine Formulated via Coaxial Electrospray Preserves Toxin Neutralization and Enhances Murine Survival Following Inhalational Bacillus Anthracis Exposure

Subunit formulations are regarded as the safest type of vaccine, but they often contain a protein-based antigen that can result in significant challenges, such as preserving antigenicity during formulation and administration. Many studies have demonstrated that encapsulation of protein antigens in polymeric microparticles (MPs) via emulsion techniques results in total IgG antibody titers comparable to alum formulations, however, the antibodies themselves are non-neutralizing. To address this issue, a coaxial electrohydrodynamic spraying (electrospray) technique is used to formulate a microparticulate-based subunit anthrax vaccine under conditions that minimize recombinant protective antigen (rPA) exposure to harsh solvents and high shear stress. rPA and the adjuvant resiquimod are encapsulated either in separate or the same acetalated dextran MPs. Using a murine model, the electrospray formulations lead to higher IgG2a subtype titers as well as comparable total IgG antibody titers and toxin neutralization relative to the FDA-approved vaccine (BioThrax). BioThrax provides no protection against a lethal inhalational challenge of the highly virulent Ames Bacillus anthracis anthrax strain, whereas 50% of the mice vaccinated with separately encapsulated electrospray MPs survive. Overall, this study demonstrates the potential use of electrospray for encapsulating protein antigens in polymeric MPs.

Electrosprayed Montelukast/poly (lactic-co-glycolic acid) particle based coating: A new therapeutic approach towards the prevention of in-stent restenosis

Drug-eluting stents (DESs), have shown promising results in prevention of in-stent restenosis after percutaneous coronary intervention (PCI). The elevated level of leukotrienes (LTs) detected in injured arteries after PCI, together with the potential role of LTs in inflammatory cascades and structural alterations in arterial wall provides the rationale for development of therapeutic strategies for prevention of in-stent restenosis using LTs receptor antagonists. Montelukast (MK) is a selective cysLT1 receptor antagonist, with anti-inflammatory and anti-proliferative properties, which has been used for treatment of various diseases. Here, we report on the fabrication of MK/PLGA particles by electrospraying, aiming towards the development of particle based coating of DESs. The electrosprayed particles incorporated with 3% and 6% w/w MK exhibited fairly spherical shape with smooth surfaces and narrow size distribution. Sustained release of MK for up to 40days was obtained for both formulations, with higher initial burst release and drug release rate for the particles with higher drug loading. The LTD4 induced proliferation and migration of human coronary artery smooth muscle cells (HCASMCs) by 35% and 85%, respectively, which was substantially antagonized using MK incorporated particles. Nevertheless, MK antagonism preserved the normal proliferation and migration of human coronary artery endothelial cells (HCAECs). Moreover, MK antagonism inhibited the LTD4 induced phenotypic transition of HCASMCs from contractile to synthetic type. The electrosprayed MK-PLGA particles can be employed as a coating for DESs to inhibit the formation of neointimal hyperplasia responsible for in-stent restenosis, yet preserve the healing rate of the stented vessel.

STATEMENT OF SIGNIFICANT

Montelukast (MK) is a selective cysLT1 receptor antagonist, with anti-inflammatory and anti-proliferative properties. The LTD4 induced proliferation and migration of human coronary artery smooth muscle cells by 35% and 85%, respectively, which was substantially antagonized using MK incorporated particles. MK antagonism preserved the normal proliferation and migration of human coronary artery endothelial cells. The MK antagonism inhibited the phenotypic transition of human coronary artery smooth muscle cells from contractile to synthetic one induced by LTD4. The electrosprayed MK-PLGA particles can be employed as coating for DESs to inhibit formation of neointimal hyperplasia, responsible for in-stent restenosis.

Cardiac Chemical Exchange Saturation Transfer MR Imaging Tracking of Cell Survival or Rejection in Mouse Models of Cell Therapy

Purpose To examine whether cardiac chemical exchange saturation transfer (CEST) imaging can be serially and noninvasively used to probe cell survival or rejection after intramyocardial implantation in mice. Materials and Methods Experiments were compliant with the National Institutes of Health Guidelines on the Use of Laboratory Animals and approved by the Institutional Animal Care and Use Committee. One million C2C12 cells labeled with either europium (Eu) 10-(2-hydroxypropyl)-1,4,7-tetraazacyclododecane-1,4,7-triacetic acid (HP-DO3A) or saline via the hypotonic swelling technique were implanted into the anterior-lateral left ventricular wall in C57BL/6J (allogeneic model, n = 17) and C3H (syngeneic model, n = 13) mice. Imaging (frequency offsets of ±15 parts per million) was performed 1, 10, and 20 days after implantation, with the asymmetrical magnetization transfer ratio (MTR_asym) calculated from image pairs. Histologic examination was performed at the conclusion of imaging. Changes in MTR_asym over time and between mice were assessed by using two-way repeated-measures analysis of variance. Results MTR_asym was significantly higher in C3H and C57BL/6J mice in grafts of Eu-HP-DO3A-labeled cells (40.2% ± 5.0 vs 37.8% ± 7.0, respectively) compared with surrounding tissue (-0.67% ± 1.7 vs -1.8% ± 5.3, respectively; P < .001) and saline-labeled grafts (-0.4% ± 6.0 vs -1.2% ± 3.6, respectively; P < .001) at day 1. In C3H mice, MTR_asym remained increased (31.3% ± 9.2 on day 10, 28.7% ± 5.2 on day 20; P < .001 vs septum) in areas of in Eu-HP-DO3A-labeled cell grafts. In C57BL/6J mice, corresponding MTR_asym values (11.3% ± 8.1 on day 10, 5.1% ± 9.4 on day 20; P < .001 vs day 1) were similar to surrounding myocardium by day 20 (P = .409). Histologic findings confirmed cell rejection in C57BL/6J mice. Estimation of graft area was similar with cardiac CEST imaging and histologic examination (R² = 0.89). Conclusion Cardiac CEST imaging can be used to image cell survival and rejection in preclinical models of cell therapy. ^© RSNA, 2016 Online supplemental material is available for this article.

Mesenchymal stem cells in cardiac regeneration: a detailed progress report of the last 6 years (2010-2015)

Mesenchymal stem cells have been used for cardiovascular regenerative therapy for decades. These cells have been established as one of the potential therapeutic agents, following several tests in animal models and clinical trials. In the process, various sources of mesenchymal stem cells have been identified which help in cardiac regeneration by either revitalizing the cardiac stem cells or revascularizing the arteries and veins of the heart. Although mesenchymal cell therapy has achieved considerable admiration, some challenges still remain that need to be overcome in order to establish it as a successful technique. This in-depth review is an attempt to summarize the major sources of mesenchymal stem cells involved in myocardial regeneration, the significant mechanisms involved in the process with a focus on studies (human and animal) conducted in the last 6 years and the challenges that remain to be addressed.

Dual-factor loaded functional silk fibroin scaffolds for peripheral nerve regeneration with the aid of neovascularization

Dual-factor loaded functional silk fibroin scaffolds enhanced peripheral nerve regeneration with the aid of neovascularization.

Controlled release of drugs in electrosprayed nanoparticles for bone tissue engineering

Generating porous topographic substrates, by mimicking the native extracellular matrix (ECM) to promote the regeneration of damaged bone tissues, is a challenging process. Generally, scaffolds developed for bone tissue regeneration support bone cell growth and induce bone-forming cells by natural proteins and growth factors. Limitations are often associated with these approaches such as improper scaffold stability, and insufficient cell adhesion, proliferation, differentiation, and mineralization with less growth factor expression. Therefore, the use of engineered nanoparticles has been rapidly increasing in bone tissue engineering (BTE) applications. The electrospray technique is advantageous over other conventional methods as it generates nanomaterials of particle sizes in the micro/nanoscale range. The size and charge of the particles are controlled by regulating the polymer solution flow rate and electric voltage. The unique properties of nanoparticles such as large surface area-to-volume ratio, small size, and higher reactivity make them promising candidates in the field of biomedical engineering. These nanomaterials are extensively used as therapeutic agents and for drug delivery, mimicking ECM, and restoring and improving the functions of damaged organs. The controlled and sustained release of encapsulated drugs, proteins, vaccines, growth factors, cells, and nucleotides from nanoparticles has been well developed in nanomedicine. This review provides an insight into the preparation of nanoparticles by electrospraying technique and illustrates the use of nanoparticles in drug delivery for promoting bone tissue regeneration.

Spatially localized recruitment of anti-inflammatory monocytes by SDF-1α-releasing hydrogels enhances microvascular network remodeling

Tissue repair processes are characterized by the biphasic recruitment of distinct subpopulations of blood monocytes, including classical ("inflammatory") monocytes (IMs, Ly6C(hi)Gr1(+)CX3CR1(lo)) and non-classical anti-inflammatory monocytes (AMs, Ly6C(lo)Gr1(-)CX3CR1(hi)). Drug-eluting biomaterial implants can be used to tune the endogenous repair process by the preferential recruitment of pro-regenerative cells. To enhance recruitment of AMs during inflammatory injury, a novel N-desulfated heparin-containing poly(ethylene glycol) diacrylate (PEG-DA) hydrogel was engineered to deliver exogenous stromal derived factor-1α (SDF-1α), utilizing the natural capacity of heparin to sequester and release growth factors. SDF-1α released from the hydrogels maintained its bioactivity and stimulated chemotaxis of bone marrow cells in vitro. Intravital microscopy and flow cytometry demonstrated that SDF-1α hydrogels implanted in a murine dorsal skinfold window chamber promoted spatially-localized recruitment of AMs relative to unloaded internal control hydrogels. SDF-1α delivery stimulated arteriolar remodeling that was correlated with AM enrichment in the injury niche. SDF-1α, but not unloaded control hydrogels, supported sustained arteriogenesis and microvascular network growth through 7 days. The recruitment of AMs correlated with parameters of vascular remodeling suggesting that tuning the innate immune response by biomaterial SDF-1α release is a promising strategy for promoting vascular remodeling in a spatially controlled manner.

Tunable Controlled Release of Bioactive SDF-1α via Protein Specific Interactions within Fibrin/Nanoparticle Composites

The chemokine, stromal cell-derived factor 1α (SDF-1α), is a key regulator of the endogenous neural progenitor/stem cell-mediated regenerative response after neural injury. Increased and sustained bioavailability of SDF-1α in the peri-injury region is hypothesized to modulate this endogenous repair response. Here, we describe poly(lactic-co-glycolic) acid (PLGA) nanoparticles capable of releasing bioactive SDF-1α in a sustained manner over 60days after a burst of 23%. Moreover, we report a biphasic cellular response to SDF-1α concentrations thus the large initial burst release in an in vivo setting may result in supratherapeutic concentrations of SDF-1α. Specific protein-protein interactions between SDF-1α and fibrin (as well as its monomer, fibrinogen) were exploited to control the magnitude of the burst release. Nanoparticles embedded in fibrin significantly reduced the amount of SDF-1α released after 72 hrs as a function of fibrin density. Therefore, the nanoparticle/fibrin composites represented a means to independently tune the magnitude of the burst phase release from the nanoparticles while perserving a bioactive depot of SDF-1α for release over 60days.