Preparation of highly stable fullerene C60 decorated graphene oxide nanocomposite and its sensitive electrochemical detection of dopamine in rat brain and pharmaceutical samples

Implications of analytical nanoscience in pharmaceutical and biomedical fields: A critical view

This review summarizes recent progress performed in the design and application of analytical tools and methodologies using nanomaterials for pharmaceutical analysis, and specifically new nanomedicines at distinct phases of development and translation from preclinical to clinical stages. Over the last 10-15 years, a growing number of studies have utilized various nanomaterials, including carbon-based, metallic nanoparticles, polymeric nanomaterials, materials based on biological molecules, and composite nanomaterials as tools for improving the analysis of pharmaceutical products. New and more complex nanomaterials are currently being explored to influence different stages of the analytical process. These materials provide unique properties to support the extraction of analytes in complex samples, increase the selectivity and efficiency of chromatographic separations, and improve the analytical properties of many sensor applications. Indeed, nanomaterials, including electrochemical detection approaches and biosensing, are expanding at a remarkable rate. Furthermore, the analytical performance of numerous approaches to determine drugs in different matrices can be significantly improved in terms of precision, detection limits, selectivity, and time of analysis. However, the quality control and metrological characterization of the currently synthesized nanomaterials still depend on the development of new and improved analytical methodologies, and the application of specific and improved instrumentation. Therefore, there is still much to explore about the properties of nanomaterials which need to be determined even more precisely and accurately.

BSA nanoclusters-based sensor for detection of dopamine in schizophrenia from biofluids

OBJECTIVE

To develop nontoxic and stable fluorescent emission B-Cu nanoclusters (NCs) for the specific detection of dopamine at low concentrations in cerebrospinal fluid (CSF).

SIGNIFICANCE

Fluorescent gold and copper NCs conjugated with proteins, such as bovine serum albumin (BSA), offer photostability and healthcare potential. This study focused on fabricating B-Cu NCs that exhibited superior characteristics for sensitive dopamine detection.

METHODS

The study employed various instrumental techniques including attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), spectrofluorometry, and transmission electron microscopy (TEM) to characterize the formulated B-Cu NCs. The NCs were synthesized, resulting in particle size ∼300 nm. The highest observed fluorescence was recorded at 24542.81 relative fluorescence units (RFU).

RESULTS

The introduction of dopamine at concentrations of 0.1, 0.2, 0.3, and 0.4 ng/mL led to decreased fluorescence in both B-Au and B-Cu NCs due to an electron transport system. This reduction in fluorescence allowed dopamine concentration analysis in phosphate buffer and biological fluids such as blood plasma and CSF. B-Cu NCs showed potential as a biosensing system for point-of-care (POC) applications, specifically for diagnosing schizophrenia.

CONCLUSION

The study successfully synthesized stable and nontoxic B-Cu NCs with enhanced fluorescent emission properties. These NCs exhibited the capacity to detect dopamine at low concentrations in CSF. The study's findings hold promise for future applications, particularly in the development of a B-Cu NCs-based biosensing system for convenient POC detection of schizophrenia by both patients and clinicians. The potential impact of this technology on healthcare and biomedical fields is substantial.

Recent Development of Nano-Carbon Material in Pharmaceutical Application: A Review

Carbon nanomaterials have attracted researchers in pharmaceutical applications due to their outstanding properties and flexible dimensional structures. Carbon nanomaterials (CNMs) have electrical properties, high thermal surface area, and high cellular internalization, making them suitable for drug and gene delivery, antioxidants, bioimaging, biosensing, and tissue engineering applications. There are various types of carbon nanomaterials including graphene, carbon nanotubes, fullerenes, nanodiamond, quantum dots and many more that have interesting applications in the future. The functionalization of the carbon nanomaterial surface could modify its chemical and physical properties, as well as improve drug loading capacity, biocompatibility, suppress immune response and have the ability to direct drug delivery to the targeted site. Carbon nanomaterials could also be fabricated into composites with proteins and drugs to reduce toxicity and increase effectiveness in the pharmaceutical field. Thus, carbon nanomaterials are very effective for applications in pharmaceutical or biomedical systems. This review will demonstrate the extraordinary properties of nanocarbon materials that can be used in pharmaceutical applications.

Collective movement and thermal stability of fullerene clusters on the graphene layer

Understanding the motion characteristics of fullerene clusters on the graphene surface is critical for designing surface manipulation systems. Toward this purpose, using the molecular dynamics method, we evaluated six clusters of fullerenes including 1, 2, 3, 5, 10, and 25 molecules on the graphene surface, in the temperature range of 25 to 500 K. First, the surface motion of clusters is studied at 200 K and lower temperatures, in which fullerenes remain as a single group. The trajectories of the motion as well as the diffusion coefficients indicate the reduction of surface mobility as a response to the increase of the fullerene number. The clusters show normal diffusion at the temperature of 25 K, while they follow the super-diffusion regime at higher temperatures. The separation of fullerenes occurs at 300 K and higher temperatures. Due to the increase of vdW attraction with the increase of the fullerene number, the separation of fullerenes in larger clusters occurs at higher temperatures. The thermal energy at 500 K is sufficient to divide the large C60 clusters into smaller clusters. This energy level is related to the saturation of the interaction energy experienced by individual fullerenes, which can be estimated from the potential energy analysis. The results of simulations reveal that the separation occurs at the edge of clusters. Moreover, we studied the thermal stability of multilayer fullerene clusters on graphene. The simulation results indicate the tendency of multilayer clusters to locate on the surface, which implies the wetting property of C60s on the graphene layer.

Electrochemical sensing system for the analysis of emerging contaminants in aquatic environment: A review

This survey distinguishes understudied spaces of arising impurity research in wastewaters and the habitat, and suggests bearing for future checking. Thinking about the impeding effect of toxins on human wellbeing and biological system, their discovery in various media including water is fundamental. This review sums up and assesses the latest advances in the electrochemical detecting of emerging contaminants (ECs). This survey is expected to add to the advancement in electrochemical applications towards the ECs. Different electrochemical insightful procedures like Amperometry, Voltammetry has been examined in this overview. The improvement of cutting edge nanomaterial-based electrochemical sensors and biosensors for the discovery of drug compounds has accumulated monstrous consideration because of their benefits, like high affectability and selectivity, continuous observing, and convenience has been reviewed in this survey. This survey likewise features the diverse electrochemical treatment procedures accessible for the removal of ECs.

Rosaniline Hydrochloride Encapsulated MCM-48: Fluorescent and Electrochemical Sensor for Dopamine

The dye Rosaniline hydrochloride (RANH) has been successfully incorporated in MCM-48 (designated as RANH@MCM-48) and characterized by various spectroscopic methods including FT-IR, SEM, EDX and N₂ adsorption-desorption isotherm. RANH@MCM-48 in aqueous medium acts as fluorescence "on" sensor for neurotransmitter dopamine (DA) in presence of its main biological interfering agent ascorbic acid or vitamin c (AA) along with Glucose, Cholesterol and Uric acid (UA). The limits of detection (LOD) were found to be 65 nM and 51 nM respectively in absence and in presence of AA. The interaction of DA to RANH@MCM-48 is found to be reversible with respect to EDTA^2-. The fluorescence intensity vs. pH plot shows a narrow fluorescence window of 7.2 to 8.8. RANH@MCM-48 has been successfully applied for DA detection in artificial cerebrospinal fluid (ACF) and bovine serum albumin (BSA) with LOD values 27 nM and 22.5 nM respectively. Platinum disc electrode has been modified with RANH@MCM-48 which showed distinct oxidation peaks with a separation of 0.188 V in cyclic voltammetry (CV). The LOD for DA in presence of AA determined from oxidation current is 77.5 nM. The voltammetric detection of DA is found to be free from common interfering species Na⁺, K⁺, Ca²⁺, Fe²⁺, UA, Cholesterol and Glucose. RANH@MCM-48 has been found to be a very effective fluorescence and voltammetric sensor for DA with very low  LOD.

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.

Toward the Development of Disposable Electrodes Based on Holmium Orthovanadate/f-Boron Nitride: Impacts and Electrochemical Performances of Emerging Inorganic Contaminants

Rare-earth metal orthovanadates have great technological relevance in the family of rare-earth compounds owing to their excellent physical and chemical properties. A significant number of studies have been carried out on this class of compounds to exploit their electrochemical properties in virtue of variable oxidation states. But holmium vanadate (HoV) and its morphology selective synthesis have not been considered, which can have potential applications similar to the rest of the family. In this work, we propose the synthesis of superior architectures of HoV with a functionalized boron nitride (f-BN) nanocomposite. The synergistic effect between HoV and f-BN can have a positive effect on the physical characteristics of the nanocomposite, which can be explored for its electrochemical capacity. Here, HoV incorporated with f-BN is explored for the electrochemical detection of Hg²⁺ ions, which is known for its toxicity-induced environmental health hazards. The structural and compositional revelation reveals higher conductivity and faster electron transfer in the composite, which facilitates a wide working range (0.02-53.8 and 64.73-295.4 μM), low limit of detection (5 nM), higher sensitivity (66.6 μA μM^-1 cm^-2), good selectivity over 10-fold higher concentration of other interfering compounds compared to Hg²⁺ ion concentration, and good cycles stability (30 segments) toward Hg²⁺ ion detection. This also envisages the morphology selective synthesis and utilization of other rare-earth metals, whose electrochemical capacities are unexplored.

A simple one-step electrochemical deposition of bioinspired nanocomposite for the non-enzymatic detection of dopamine

A simple and cost-effective electrochemical synthesis of carbon-based nanomaterials for electrochemical biosensor is of great challenge these days. Our study describes a single-step electrochemical deposition strategy to prepare a nanocomposite of electrochemically reduced graphene oxide (ErGO), multi-walled carbon nanotubes (MWCNTs), and polypyrrole (PPy) in an aqueous solution of pH 7.0 for dopamine (DA) detection. The ErGO/MWCNTs/PPy nanocomposites show enhanced electrochemical performance due to the strong π–π* stacking interactions among ErGO, MWCNTs, and PPy. The efficient interaction of the nanocomposites is confirmed by evaluating its physical and electrochemical characteristics using field-emission scanning electron microscopy, Raman spectroscopy, electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The deposited nanocomposites are highly stable on the substrates and possess high surface areas, which is vital to improve the sensitivity and selectivity for DA detection. The controlled deposition of the ErGO/MWCNTs/PPy nanocomposites can provide enhanced electrochemical detection of DA. The sensor demonstrates a short time response within 2 s and is a highly sensitive approach for DA detection with a dynamic linear range of 25–1000 nM (R2 = 0.999). The detection limit is estimated to be 2.3 nM, and the sensor sensitivity is calculated to be 8.96 μA μM−1 cm−2, with no distinct responses observed for other biological molecules.

Tuning the Intermolecular Electron Transfer of Low-Dimensional and Metal-Free BCN/C60 Electrocatalysts via Interfacial Defects for Efficient Hydrogen and Oxygen Electrochemistry

The development of low-dimensional (LD) supramolecular materials with multifunctional electrocatalytic properties has sparked the attention of the catalysis community. Herein, we report the synthesis of a new class of 0D-2D heterostructures composed of boron carbon nitride nanosheets (BCN NSs) and fullerene molecules (C₆₀/F) that exhibit multifunctional electrocatalytic properties for the hydrogen evolution/oxidation reactions (HER/HOR) and the oxygen evolution/reduction reactions (OER/ORR). The electrocatalytic properties were studied with varying F:BCN weight ratios to optimize the intermolecular electron transfer (ET) from the BCN NSs to the electron-accepting C₆₀ molecules. The nanohybrid supramolecular material with 10 wt % F in BCN NSs (10% F/BCN) exhibited the largest Raman and C 1s binding energy shifts, which were associated with greater cooperativity interactions and enhanced ET processes at the F/BCN interface. This synergistic interfacial phenomenon resulted in highly active catalytic sites that markedly boosted electrocatalytic activity of the material. The 10% F/BCN showed the highest tetrafunctional catalytic performance, outperforming the OER catalytic activity of commercial RuO₂ catalysts with a η₁₀ of 390 mV and very competitive onset potential values of -0.042 and 0.92 V vs RHE for HER and ORR, respectively, and a current density value of 1.47 mA cm^-2 at 0.1 V vs RHE with an ultralow ΔG_H* value of -0.03 eV toward the HOR process. Additionally, the 10% F/BCN catalyst was also used as both cathode and anode in a water splitting device, delivering a cell potential of 1.61 V to reach a current density of 10 mA cm^-2.

CoFe2O4 supported g-C3N4 nanocomposite for the sensitive electrochemical detection of dopamine

The CoFe2O4@g-CN modified electrode has been applied for the real-time detection of DA in human biological samples with appreciable recovery results.

Tin disulfide nanorod-graphene-β-cyclodextrin nanocomposites for sensing dopamine in rat brains and human blood serum

In the present work describes a facile synthesis of tin disulfide (SnS₂) nanorods decorated graphene-β-cyclodextrin (SnS₂/GR-β-CD) nanocomposite for robust and novel dopamine (DA) electrochemical biosensor applications. The DA biosensor was fabricated using the glassy carbon electrode (GCE) modified with SnS₂/GR-β-CD nanocomposite. The sonochemical and hydrothermal methods have been used for the synthesis of SnS₂/GR-β-CD. Different physicochemical methods were used to confirm the formation of the GR-β-CD, SnS₂, and SnS₂/GR-β-CD nanocomposite. The cyclicvoltammetric cathodic current response of DA was 5 folds higher than those observed at bare, β-CD, SnS₂-β-CD, and GR-β-CD modified GCEs. Under optimised conditions, the biosensor's DPV response current is linear to DA from the concentration of 0.01-150.76 μM. The detection limit of the biosensor was 4 nM. The SnS₂/GR-β-CD biosensor shows an excellent selectivity towards DA in the presence of common interfering species, including ascorbic acid and uric acid. Also, the as-prepared nanocomposite-modified electrode exhibited satisfactory long-term stability, sensitivity (2.49 μAμM^-1 cm^-2) along with reusability for detection of DA. The fabricated SnS₂/GR-β-CD biosensor was successfully used for the detection of DA in the rat brain and human blood serum samples.

Nanomaterials for Healthcare Biosensing Applications

In recent years, an increasing number of nanomaterials have been explored for their applications in biomedical diagnostics, making their applications in healthcare biosensing a rapidly evolving field. Nanomaterials introduce versatility to the sensing platforms and may even allow mobility between different detection mechanisms. The prospect of a combination of different nanomaterials allows an exploitation of their synergistic additive and novel properties for sensor development. This paper covers more than 290 research works since 2015, elaborating the diverse roles played by various nanomaterials in the biosensing field. Hence, we provide a comprehensive review of the healthcare sensing applications of nanomaterials, covering carbon allotrope-based, inorganic, and organic nanomaterials. These sensing systems are able to detect a wide variety of clinically relevant molecules, like nucleic acids, viruses, bacteria, cancer antigens, pharmaceuticals and narcotic drugs, toxins, contaminants, as well as entire cells in various sensing media, ranging from buffers to more complex environments such as urine, blood or sputum. Thus, the latest advancements reviewed in this paper hold tremendous potential for the application of nanomaterials in the early screening of diseases and point-of-care testing.

A highly sensitive sensor based on ordered mesoporous ZnFe2O4 for electrochemical detection of dopamine

Accurate and sensitive detection of dopamine (DA) is fundamental to monitor and diagnose certain neurological diseases. Herein, highly ordered mesoporous ZnFe₂O₄ (OM-ZnFe₂O₄) is prepared via a facile nanocasting method and shows the highly sensitive in the electrochemical detection of DA. The optimized OM-ZnFe₂O₄-40 shows the most excellent activity for DA oxidation in a wide linear range from 2 to 600 nM with a quick response time of 5 s, high sensitivity of 0.094 nA nM^-1 and a lower detection limit of 0.4 nM (S/N = 3). The electrode modified with OM-ZnFe₂O₄ is further successfully used to monitor the increase of DA concentration induced by K⁺-stimulation of living PC12 cells in a neurological environment. This work offers a simple and powerful strategy for designing electrodes for detecting DA in biological systems.

Electroanalysis of Catecholamine Drugs using Graphene Modified Electrodes

Background:

Catecholamine drugs are a family of electroactive pharmaceutics, which are widely analyzed through electrochemical methods. However, for low level online determination and monitoring of these compounds, which is very important for clinical and biological studies, modified electrodes having high signal to noise ratios are needed. Numerous materials including nanomaterials have been widely used as electrode modifies for these families during the years. Among them, graphene and its family, due to their remarkable properties in electrochemistry, were extensively used in modification of electrochemical sensors.

Objective:

In this review, working electrodes which have been modified with graphene and its derivatives and applied for electroanalyses of some important catecholamine drugs are considered.

A sandwich-type electrochemical aptasensor for Mycobacterium tuberculosis MPT64 antigen detection using C60NPs decorated N-CNTs/GO nanocomposite coupled with conductive PEI-functionalized metal-organic framework

The present work described a novel sandwich-type electrochemical aptasensor for rapid and sensitive determination of Mycobacterium tuberculosis MPT64 antigen. Herein, a novel carbon nanocomposite composed of fullerene nanoparticles, nitrogen-doped carbon nanotubes and graphene oxide (C₆₀NPs-N-CNTs/GO) was facilely synthesized for the first time, which not only possessed a large specific surface area and excellent conductivity, but also exhibited outstanding inherent electroactive property, and therefore served as nanocarrier and redox nanoprobe simultaneously. Gold nanoparticles (AuNPs) was then uniformly anchored onto the surface of such nanocomposite via Au-N bonds to bind with MPT64 antigen aptamer Ⅱ (MAA Ⅱ), forming the tracer label to realize generation and amplification of electrochemical signal. Additionally, conductive polyethyleneimine (PEI)-functionalized Fe-based metal-organic framework (P-MOF) was used as a sensing platform to absorb bimetallic core-shell Au-Pt nanoparticles (Au@Pt), which could accelerate electron transfer and increase the immobilization of MPT64 antigen aptamer Ⅰ (MAA Ⅰ). After the typical sandwich-type protein-aptamer recognition, the inherent electroactivity of the tracer label was provoked by tetraoctylammonium bromide (TOAB), leading to a well-defined current response. Under the optimum condition, the proposed aptasensor showed a wide linear range for MPT64 detection from 1 fg/mL to 1 ng/mL with a limit of detection (LOD) as low as 0.33 fg/mL. More importantly, it was successfully used for MPT64 antigen detection in human serum, exhibiting a promising prospect for TB diagnosis in clinical practice.

Hybrids of Fullerenes and 2D Nanomaterials

Fullerene has a definite 0D closed-cage molecular structure composed of merely sp2-hybridized carbon atoms, enabling it to serve as an important building block that is useful for constructing supramolecular assemblies and micro/nanofunctional materials. Conversely, graphene has a 2D layered structure, possessing an exceptionally large specific surface area and high carrier mobility. Likewise, other emerging graphene-analogous 2D nanomaterials, such as graphitic carbon nitride (g-C3N4), transition-metal dichalcogenides (TMDs), hexagonal boron nitride (h-BN), and black phosphorus (BP), show unique electronic, physical, and chemical properties, which, however, exist only in the form of a monolayer and are typically anisotropic, limiting their applications. Upon hybridization with fullerenes, noncovalently or covalently, the physical/chemical properties of 2D nanomaterials can be tailored and, in most cases, improved, significantly extending their functionalities and applications. Here, an exhaustive review of all types of hybrids of fullerenes and 2D nanomaterials, such as graphene, g-C3N4, TMDs, h-BN, and BP, including their preparations, structures, properties, and applications, is presented. Finally, the prospects of fullerene-2D nanomaterial hybrids, especially the opportunity of creating unknown functional materials by means of hybridization, are envisioned.

Voltammetric sensing based on the use of advanced carbonaceous nanomaterials: a review

This review (with 210 references) summarizes recent developments in the design of voltammetric chemical sensors and biosensors based on the use of carbon nanomaterials (CNMs). It is divided into subsections starting with an introduction into the field and a description of its current state. This is followed by a large section on various types of voltammetric sensors and biosensors using CNMs with subsections on sensors based on the use of carbon nanotubes, graphene, graphene oxides, graphene nanoribbons, fullerenes, ionic liquid composites with CNMs, carbon nanohorns, diamond nanoparticles, carbon dots, carbon nanofibers and mesoporous carbon. The third section gives conclusion and an outlook. Tables are presented on the application of such sensors to voltammetric detection of neurotransmitters, metabolites, dietary minerals, proteins, heavy metals, gaseous molecules, pharmaceuticals, environmental pollutants, food, beverages, cosmetics, commercial goods and drugs of abuse. The authors also describe advanced approaches for the fabrication of robust functional carbon nano(bio)sensors for voltammetric quantification of multiple targets. Graphical Abstract Featuring execellent electrical, catalytic and surface properies, CNMs have gained enormous attention for designing voltammetric sensors and biosensors. Functionalized CNM-modified electrode interfaces have demonstrated their prominent role in biological, environmental, pharmaceutical, chemical, food and industrial analysis.

One-Pot Green Synthesis of Graphene Nanosheets Encapsulated Gold Nanoparticles for Sensitive and Selective Detection of Dopamine

We report a simple new approach for green preparation of gallic acid supported reduced graphene oxide encapsulated gold nanoparticles (GA-RGO/AuNPs) via one-pot hydrothermal method. The as-prepared composites were successfully characterized by using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray powder diffraction techniques (XRD), scanning electron microscope (SEM), high resolution transmission electron microscopy (HRTEM) and elemental analysis. The GA-RGO/AuNPs modified electrode behaves as a hybrid electrode material for sensitive and selective detection of dopamine (DA) in presence of ascorbic acid (AA) and uric acid (UA). The GA-RGO/AuNPs modified electrode displays an excellent electrocatalytic activity towards the oxidation of DA and exhibits a wide linear response range over the DA concentrations from 0.01-100.3 μM with a detection limit (LOD) of 2.6 nM based on S/N = 3. In addition, the proposed sensor could be applied for the determination of DA in human serum and urine samples for practical analysis.

Gold nanocages decorated biocompatible amine functionalized graphene as an efficient dopamine sensor platform

Nanocomposite of gold nanocages and chemically modified graphene oxide (GNCs/CMG) was synthesized in N,N-dimethylformamide (DMF) for sensitive detection of dopamine (DA). DA is widely spread in central nervous system which can regulates essential body functions like movement and emotional behaviour. In this regard sensitive and fast detection of DA level in human body is still challenging considering its interference with other biomolecules in biological samples. CMG was synthesized through amine modification of graphene oxide (GO) with DMF at relatively high temperature followed by attachment of GNCs, fabricated using a galvanic replacement between silver nanocubes and HAuCl₄ solution in the DMF. X-ray diffraction (XRD) pattern of GNCs/CMG nanocomposite revealed high crystallization of GNCs attached to the graphene nanosheets and microscopic images revealed relatively uniform decoration of GNCs on the surface of CMG. Nanocomposite modified glassy carbon electrode (GNCs/CMG/GCE) was used to investigate the electrochemical behaviour of DA with cyclic voltammetry and amperometry techniques. The linear range for dopamine was between 0.1 and 80μM with a low detection limit of 0.02μM. Furthermore, GNCs/CMG/GCE exhibited satisfying reproducibility, long-term stability and high selectivity for DA detection in large amount of ascorbic acid with good results for determination in human serum samples.

Plasmon-Induced Hot Electrons on Mesoporous Carbon for Decomposition of Organic Pollutants under Outdoor Sunlight Irradiation

In this study, a 4 in. CMK-8-Nafion membrane was fabricated using three-dimensional cubic ordered mesoporous carbon CMK-8 blended with a Nafion polymer. Plasmon-resonance hot electrons and holes from Au nanoparticles (NPs) combined with this CMK-8-Nafion membrane resulted in the effective decomposition of methyl orange (MO) due to the synergetic work of hot carriers with mesoporous carbon; a sample of Au/CMK-8-Nafion exposed to outdoor sunlight radiation for 150 min successfully removed 97% of MO. Fourier transform infrared spectroscopy (FTIR) was employed to examine the generation of hydroxyl groups (OH-) during decomposition. Finally, the spatial distribution of hydroxyl groups was also investigated across the different coverage densities of plasmonic Au NPs.

Fluorescent Gold Nanoclusters for Selective Detection of Dopamine in Cerebrospinal fluid

Since the last two decades, protein conjugated fluorescent gold nanoclusters (NCs) owe much attention in the field of medical and nanobiotechnology due to their excellent photo stability characteristics. In this paper, we reported stable, nontoxic and red fluorescent emission BSA-Au NCs for selective detection of L-dopamine (DA) in cerebrospinal fluid (CSF). The evolution was probed by various instrumental techniques such as UV-vis spectroscopy, High resolution transmission electron microscopy (HTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), photoluminescence spectroscopy (PL). The synthesised BSA-Au NCs were showing 4–6 nm with high fluorescent ~8% Quantum yield (QY). The fluorescence intensity of BSA-Au NCs was quenched upon the addition of various concentrations of DA via an electron transfer mechanism. The decrease in BSA-Au NCs fluorescence intensity made it possible to determine DA in PBS buffer and the spiked DA in CSF in the linear range from 0 to 10 nM with the limit of detection (LOD) 0.622 and 0.830 nM respectively. Best of our knowledge, as-prepared BSA-Au NCs will gain possible strategy and good platform for biosensor, drug discovery, and rapid disease diagnosis such as Parkinson’s and Alzheimer diseases.

A novel ionic liquid functionalized graphene oxide supported gold nanoparticle composite film for sensitive electrochemical detection of dopamine

A simple and sensitive electrochemical sensor for detection of dopamine has been developed based on ionic liquid functionalized graphene oxide supported gold nanoparticles (GO-IL-AuNPs) coated onto a glassy carbon electrode.

Highly stable biomolecule supported by gold nanoparticles/graphene nanocomposite as a sensing platform for H2O2 biosensor application

Highly stable biomolecule supported by AuNPs assisted with graphene nanocomposite as a sensing platform for H₂O₂ biosensor application.