Graphitic carbon nitride/BiOCl composites for sensitive photoelectrochemical detection of ciprofloxacin

CuInS2/Red Phosphorus Nanosheet Interleaved Heterostructures with Improved Interfacial Charge Transfer for Photoelectrochemical Aptasensing

Accelerating the migration of interfacial carriers in heterojunctions is crucial for achieving highly sensitive photoelectrochemical (PEC) sensing. In this study, we developed three-dimensional (3D)/two-dimensional (2D) CuInS2/red phosphorus nanosheet (CuInS2/RP NS) n-n heterojunction functional materials with enhanced interfacial charge transfer capabilities for PEC sensing. The 3D CuInS2 serves as a conductive layer, providing excellent electronic conductivity and superior electron absorption and transport properties. In contrast, the ultrathin RP NS acts as a transport layer that enhances carrier mobility. The 3D/2D heterojunction ensures a large interface contact surface, shortening the carrier transport distance. A well-aligned band position generates a substantial built-in electric field, providing a significant driving force for efficient carrier separation and migration, thereby improving response sensitivity. A PEC aptamer sensor was constructed based on the synthesized heterostructure for ciprofloxacin detection. The detection limit of the CuInS2/RP NS aptamer sensor for ciprofloxacin is 2.03 × 10-15 mg·mL-1, with a linear range from 1.0 × 10-14 to 1.0 × 10-5 mg·mL-1. This work presents a strategy for enhancing the photoelectric response by modulating the interface structure of heterojunctions, thereby opening new prospects for the application of highly sensitive PEC sensors in antibiotic detection.

Preparation of Novel Layered High Entropy Bismuth-Based Materials and their Photocatalytic Degradation Mechanism

We prepared BiOCl, BiO(ClBr), BiO(ClBrI), and BiO[ClBrI(CO3)0.5] materials using a simple coprecipitation method. It was found that adjusting the number of anions in the anion layer was conducive to adjusting the band structure of BiOX and could effectively promote the migration and separation of photogenerated carriers, thus improving the photocatalytic activity. We first selected methyl orange (MO) as the study pollutant and compared it with BiOCl, BiO(ClBr), and BiO(ClBrI). The first-order kinetic constants of MO degradation by BiO[ClBrI(CO3)0.5] increased by 90.3, 33.9, and 3.1 times, respectively. The photocatalytic degradation rate of methylene blue by BiO[ClBrI(CO3)0.5] was 89.5%, indicating the excellent photocatalytic performance of BiO[ClBrI(CO3)0.5]. The stability of BiO[ClBrI(CO3)0.5] was demonstrated through cyclic experiments and XRD analysis before and after the reaction. The photocatalytic degradation of MO by BiO[ClBrI(CO3)0.5] showed that h+ and 1O2 were the main active oxidizing species and •O2- was the secondary active substance. Overall, our work provides new ideas for the synthesis and degradation of organic pollutants by using two-dimensional anionic high-entropy materials.

Recent advances in photoelectrochemical platforms based on porous materials for environmental pollutant detection

Human health and ecology are seriously threatened by harmful environmental contaminants. It is essential to develop efficient and simple methods for their detection. Environmental pollutants can be detected using photoelectrochemical (PEC) detection technologies. The key ingredient in the PEC sensing system is the photoactive material. Due to the unique characteristics, such as a large surface area, enhanced exposure of active sites, and effective mass capture and diffusion, porous materials have been regarded as ideal sensing materials for the construction of PEC sensors. Extensive efforts have been devoted to the development and modification of PEC sensors based on porous materials. However, a review of the relationship between detection performance and the structure of porous materials is still lacking. In this work, we present an overview of PEC sensors based on porous materials. A number of typical porous materials are introduced separately, and their applications in PEC detection of different types of environmental pollutants are also discussed. More importantly, special attention has been paid to how the porous material's structure affects aspects like sensitivity, selectivity, and detection limits of the associated PEC sensor. In addition, future research perspectives in the area of PEC sensors based on porous materials are presented.

Carbon Quantum Dots Accelerating Surface Charge Transfer of 3D PbBiO2I Microspheres with Enhanced Broad Spectrum Photocatalytic Activity-Development and Mechanism Insight

The development of a highly efficient, visible-light responsive catalyst for environment purification has been a long-standing exploit, with obstacles to overcome, including inefficient capture of near-infrared photons, undesirable recombination of photo-generated carriers, and insufficient accessible reaction sites. Hence, novel carbon quantum dots (CQDs) modified PbBiO₂I photocatalyst were synthesized for the first time through an in-situ ionic liquid-induced method. The bridging function of 1-butyl-3-methylimidazolium iodide ([Bmim]I) guarantees the even dispersion of CQDs around PbBiO₂I surface, for synchronically overcoming the above drawbacks and markedly promoting the degradation efficiency of organic contaminants: (i) CQDs decoration harness solar photons in the near-infrared region; (ii) particular delocalized conjugated construction of CQDs strength via the utilization of photo-induced carriers; (iii) π-π interactions increase the contact between catalyst and organic molecules. Benefiting from these distinguished features, the optimized CQDs/PbBiO₂I nanocomposite displays significantly enhanced photocatalytic performance towards the elimination of rhodamine B and ciprofloxacin under visible/near-infrared light irradiation. The spin-trapping ESR analysis demonstrates that CQDs modification can boost the concentration of reactive oxygen species (O₂^•-). Combined with radicals trapping tests, valence-band spectra, and Mott-Schottky results, a possible photocatalytic mechanism is proposed. This work establishes a significant milestone in constructing CQDs-modified, bismuth-based catalysts for solar energy conversion applications.

Recent trends on electrochemical determination of antibiotic Ciprofloxacin in biological fluids, pharmaceutical formulations, environmental resources and foodstuffs: Direct and indirect approaches

In the last few decades, pharmaceuticals, credited with saving millions of lives, have emerged as a new class of environmental contaminants. These compounds can have both chronic and acute harmful effects on aquatic ecosystems and consequently on human health. Therefore, there is an urgent need for the development of extremely sensitive, portable, and low-cost devices to perform analysis. In the present review article, recent reports on the application of various voltammetric and photo-electrochemical techniques using different electrode materials for the determination of antibiotic Ciprofloxacin (CIPRO) are reported. This review provides an insight into direct and indirect electrochemical approaches as well as the photoelectrochemical methods used for the determination of CIPRO. Emphasis is put on the applications of unmodified and modified carbon-based electrodes considering the modifier, supporting electrolytes, analytical method, concentration range, limit of detection, and real matrices. Carbon-based electrodes are the most used materials attributed to their commercial availability, reduced cost, high chemical stability, and non-toxicity.

Bandgap Funneling in Bismuth-Based Hybrid Perovskite Photocatalyst with Efficient Visible-Light-Driven Hydrogen Evolution

The photocatalytic system using hydrohalic acid (HX) for hydrogen production is a promising strategy to generate clean and renewable fuels as well as value-added chemicals (such as X₂ /X₃ ^- ). However, it is still challenging to develop a visible-light active and strong-acid resistive photocatalyst. Hybrid perovskites have been recognized as a potential photocatalyst for photovoltaic HX splitting. Herein, a novel environmentally friendly mixed halide perovskite MA₃ Bi₂ Cl_9-x I_x with a bandgap funnel structure is developed, i.e., confirmed by energy dispersive X-ray analysis and density functional theory calculations. Due to gradient neutral formation energy within iodine-doped MA₃ Bi₂ Cl₉ , the concentration of iodide element decreases from the surface to the interior across the MA₃ Bi₂ Cl_9-x I_x perovskite. Because of the aligned energy levels of iodide/chloride-mixed MA₃ Bi₂ Cl_9-x I_x , a graded bandgap funnel structure is therefore formed, leading to the promotion of photoinduced charge transfer from the interior to the surface for efficient photocatalytic redox reaction. As a result, the hydrogen generation rate of the optimized MA₃ Bi₂ Cl_9-x I_x is enhanced up to ≈341 ± 61.7 µmol h^-1 with a Pt co-catalyst under visible light irradiation.

Bismuth Oxychloride Nanomaterials Fighting for Human Health: From Photodegradation to Biomedical Applications

Environmental pollution and various diseases seriously affect the health of human beings. Photocatalytic nanomaterials (NMs) have been used for degrading pollution for a long time. However, the biomedical applications of photocatalytic NMs have only recently been investigated. As a typical photocatalytic NM, bismuth oxychloride (BiOCl) exhibits excellent photocatalytic performance due to its unique layered structure, electronic properties, optical properties, good photocatalytic activity, and stability. Some environmental pollutants, such as volatile organic compounds, antibiotics and their derivatives, heavy metal ions, pesticides, and microorganisms, could not only be detected but also be degraded by BiOCl-based NMs due to their excellent photocatalytic and photoelectrochemical properties. In particular, BiOCl-based NMs have been used as theranostic platforms because of their CT and photoacoustic imaging abilities, as well as photodynamic and photothermal performances. However, some reviews have only profiled the applications of dye degradation, hydrogen or oxygen production, carbon dioxide reduction, or nitrogen fixation of BiOCl NMs. There is a notable knowledge gap regarding the systematic study of the relationship between BiOCl NMs and human health, especially the biomedical applications of BiOCl-based NMs. As a result, in this review, the recent progress of BiOCl-based photocatalytic degradation and biomedical applications are summarized, and the improvement of BiOCl-based NMs in environmental and healthcare fields are also discussed. Finally, a few insights into the current status and future perspectives of BiOCl-based NMs are given.

1D/2D constructed Bi2S3/Bi2O2CO3 direct Z-Scheme heterojunction: A versatile photocatalytic material for boosted photodegradation, photoreduction and photoelectrochemical detection of water-based contaminants

In this work, two-dimensional Bi₂O₂CO₃ disk is synthesized, followed by the growth of Bi₂S₃ over Bi₂O₂CO₃ via topotactic transformation by controlling the amount of thiourea under hydrothermal conditions. The synthesized composite catalyst is investigated for photocatalytic oxidation and reduction of tetracycline hydrochloride and hexavalent chromium under visible light irradiation. High interfacial contact between the Bi₂O₂CO₃ disk0 and Bi₂S₃ fiber is confirmed via high-resolution microscopic imaging. Enhanced light absorption and increased charge carrier separation is observed after the formation of the Bi₂S₃/Bi₂O₂CO₃ composite. The Bi₂S₃/Bi₂O₂CO₃ composite grown using 1 mmol of thiourea shows approximately 98% degradation of tetracycline hydrochloride after 120 min and 99% Cr(VI) reduction after 90 min of photochemical reaction under visible light irradiation. The charge separation is due to the formed internal electric field at the interface, which upon light irradiation follows a z-scheme charge transfer hindering the recombination at the Bi₂S₃ and Bi₂O₂CO₃ interface, thereby contributing efficiently to the photochemical process. In addition, the mechanism of the photochemical reaction for the degradation of pollutants is supported using quencher and probe experiments. Furthermore, photoelectrochemical detection of antibiotic in aqueous solution is conducted to understand the sensing feasibility of the synthesized system.

Recent advances in biosensors for antibiotic detection: Selectivity and signal amplification with nanomaterials

Antibiotics are widely used in the prevention and treatment of infectious diseases in animals due to its bactericidal or bacteriostatic action. Residual antibiotics and their metabolites pose great threats to human and animal health, such as potential carcinogenic and mutagenic effects, and bacterial resistances. Therefore, it is necessary and urgent to accurately monitor trace amounts of antibiotics in food samples. Up to now, many analytical methods have been reported for the determination of antibiotics. Biosensors with the advantages of high sensitivity, rapid response, easy miniaturization, and low price have been widely applied to the detection of antibiotics residues in past decades. This review offered an in-depth evaluation of recognition elements for antibiotic residues in diverse food matrices. In addition, it presented a systematical and critical review on signal amplification via various materials, focusing on recently developed nanomaterials. Finally, the review provided an outlook on the future concepts to help upgrade the sensing techniques for antibiotics in food.

Sulfur-doped graphitic carbon nitride incorporated bismuth oxychloride/Cobalt based type-II heterojunction as a highly stable material for photoelectrochemical water splitting

Cobalt incorporated sulfur-doped graphitic carbon nitride with bismuth oxychloride (Co/S-gC₃N₄/BiOCl) heterojunction is prepared by an ultrasonically assisted hydrothermal treatment. The heterojunction materials have employed in photoelectrochemical (PEC) water splitting. The PEC activity and stability of the materials are promoted by constructing an interface between the visible light active semiconductor photocatalyst and cocatalysts. The photocurrent density of Co-9% S-gC₃N₄/BiOCl has attained 393.0 μA cm^-2 at 1.23 V vs. RHE, which is 7-fold larger than BiOCl and ~3-fold higher than 9% S-gC₃N₄/BiOCl. The enhanced PEC activity can be attributed to the improved electron-hole charge separation and the boosted charge transfer is confirmed by photoluminescence (PL) and electrochemical impedance spectroscopy (EIS) analysis. The fabricated Co/S-gC₃N₄/BiOCl nanohybrid material has exhibited high stability of up to 10,800 s (3 h) at 1.23 V vs. RHE during PEC water splitting reaction and the obtained photo-conversion efficiency is 3.7-fold greater than S-gC₃N₄/BiOCl and 17-fold higher than BiOCl. The FESEM and HRTEM images have revealed the formation of heterojunction interface between S-gC₃N₄ and BiOCl and the elemental mapping has confirmed the presence of cobalt over S-gC₃N₄/BiOCl. The heterojunction interface has facilitated the photo-excited charge separation and transport across the electrode/electrolyte interface and also the flat-band potential, which is confirmed by Mott-Schottky analysis.

Recent development of antibiotic detection in food and environment: the combination of sensors and nanomaterials

In recent years, the abuse of antibiotics has led to the pollution of soil and water environment, not only poultry husbandry and food manufacturing will be influenced to different degree, but also the human body will produce antibody. The detection of antibiotic content in production and life is imperative. In this review, we provide comprehensive information about chemical sensors and biosensors for antibiotic detection. We classify the currently reported antibiotic detection technologies into chromatography, mass spectrometry, capillary electrophoresis, optical detection, and electrochemistry, introduce some representative examples for each technology, and conclude the advantages and limitations. In particular, the optical and electrochemical methods based on nanomaterials are discussed and evaluated in detail. In addition, the latest research in the detection of antibiotics by photosensitive materials is discussed. Finally, we summarize the pros and cons of various antibiotic detection methods and present a discussion and outlook on the expansion of cross-scientific areas. The synthesis and application of optoelectronic nanomaterials and aptamer screening are discussed and prospected, and the future trends and potential impact of biosensors in antibiotic detection are outlined.Graphical abstract.

A photoelectrochemical aptasensor for the determination of bisphenol A based on the Cu (I) modified graphitic carbon nitride

Bisphenol A (BPA) has been penetrating every corner of our daily life via the entities of children's toys, food containers and electronic equipment. The ubiquitous exposure of BPA urges the implementation of supervising its emission in environment. This work designs a method of photoelectrochemical (PEC) aptasensing for the determination of BPA based on the Cu(I) modified carbon nitride (Cu/g-C₃N₄). The Cu/g-C₃N₄ was prepared by solvothermal reaction with the ionic liquid bis(1-hexadecyl-3-methylimidazolium) tetrachlorocuprate (II) as Cu source. Cu/g-C₃N₄ displays excellent PEC performances due to the introduction of Cu(I). The visible light absorption capacity and conductivity of g-C₃N₄ can be enhanced by introducing Cu(I). With the help of BPA-binding aptamer immobilized on the surface of Cu/g-C₃N₄, the Cu/g-C₃N₄ PEC aptasensor has adopted for the determination of BPA. The PEC aptasensor exhibits a well-fitted linear correlation between the response photocurrent signal and the logarithm of the concentration of BPA. The PEC aptasensor shows a distinguished capability of BPA detection with a wide detection range of 5.00 × 10^-11 to 5.00 × 10^-5 g L^-1 and low detection limit of 1.60 × 10^-11 g L^-1 (at S/N = 3). This work provides a profound insight for detecting BPA in environmental water.

Carbon Nitride Nanosheet and Myoglobin Modified Electrode for Electrochemical Sensing Investigations

Background:

Carbon-based nanomaterials, especially carbon nitride (C3N4) has attracted tremendous interest in biosensor applications. Meanwhile, the mechanism of redox protein sensing and related electrocatalytic reactions can provide a valid basis for understanding the process of biological redox reaction.

Objective:

The aim of this paper is to construct a new electrochemical enzyme sensor to achieve direct electron transfer of myoglobin (Mb) on CILE surface and display electrocatalytic reduction activity to catalyze trichloroacetic acid (TCA) and H2O2.

Methods:

The working electrode was fabricated based on ionic liquid modified Carbon Paste Electrode (CILE) and C3N4 nanosheets were modified on the CILE surface, then Mb solution was fixed on C3N4/CILE surface and immobilized by using Nafion film. The as-prepared biosensor displayed satisfactory electrocatalytic ability towards the reduction of TCA and H2O2 in an optimum pH 7.0 buffer solution.

Results:

The results indicated that C3N4 modified electrode retained the activity of the enzyme and displayed quasi-reversible redox behavior in an optimum pH 7.0 buffer solution. The electrochemical parameters of the immobilized Mb on the electrode surface were further calculated with the results of the electron transfer number (n) as 1.27, the charge transfer coefficient (α) as 0.53 and the electrontransfer rate constant (ks) as 3.32 s-1, respectively. The Nafion/Mb/C3N4/CILE displayed outstanding electrocatalytic reduction activity to catalyze trichloroacetic acid and H2O2.

Conclusion:

The Nafion/Mb/C3N4/CILE displayed outstanding electrocatalytic reduction, which demonstrated the promising applications of C3N4 nanosheet in the field electrochemical biosensing.

A ratiometric fluorometric ciprofloxacin assay based on the use of riboflavin and carbon dots

Carbon dots (CDs) were hydrothermally synthesized from selenious yeast. They were further coupled with riboflavin to form a dually emitting probe for ciprofloxacin (CIP). Under 370 nm excitation, the probe displays dual (blue and green) emissions with peaks at 443 and 510 nm. When CIP is added, the blue fluorescence of the CDs is enhanced while the green fluorescence remains unaffected. The ratio of the relative fluorescence intensities at 443 and 510 nm increases linearly in the 0.5-200 μM CIP concentration range. The fluorescent probe is selective and has a 0.13 μM detection limit. Satisfactory recoveries (97.9-101.1%) were received when the probe was used to quantify CIP in spiked water and human serum samples. Graphical abstractBlue-emissive carbon dots were prepared from selenious yeast via a hydrothermal method, and then coupled with riboflavin as a ratiometric fluorometric probe for ciprofloxacin determination.

Fluorometric determination of ciprofloxacin using molecularly imprinted polymer and polystyrene microparticles doped with europium(III)(DBM)3phen

The authors describe a microparticle-based system for the detection of the fluoroquinolone antibiotic ciprofloxacin. The method is using the tris(dibenzoylmethane)(1,10-phenanthroline)europium(III) luminophore in polystyrene microparticles along with a molecularly imprinted polymer (MIP) for ciprofloxacin. If ciprofloxacin is captured by the MIP, it quenches the fluorescence of the luminophores. Fluorescence drops linearly in the 0.5-100 μg L^-1 ciprofloxacin concentration range, and the detection limit is 92 ng L^-1. The method was applied to the analysis of fish samples to assess the analytical performance of the probe. Recoveries ranged from 85.4 to 86.6%, and relative standard deviations between 2.1 and 3.9% (for n = 5). Graphical abstract Schematic presentation of a microparticle-based probe using the tris(dibenzoylmethane)(1,10-phenanthroline)europium(III) luminophore in polystyrene particles along with a molecularly imprinted polymer for ciprofloxacin. After removal of template, carboxylic groups left in the probe can bind to ciprofloxacin through hydrogen bonds.

Synthesis of BiOCl using Cl source from industrial wastewater and its application for wastewater treatment

Cl^- in industrial wastewater from glyphosate production has been used as Cl source to synthesize BiOCl photocatalyst via a simple solvothermal route. The crystalline, morphology, specific surface area and optical properties of photocatalysts prepared under various conditions have been investigated. BiOCl photocatalyst prepared in acidic solution shows the highest crystallinity and without impurities and microcellular structure. The degradation of industrial wastewater contaminants demonstrates the possibility of this BiOCl used in industrial wastewater treatment and phosphorus recycling through the subsequent phosphorus recovery processes. This study not only sheds light on the possibility of photocatalysts' preparation in situ using industrial wasterwater as raw materials and the feasibility of using photocatalysis technology in wastewater treatment area, but also the chloride ions have been removed as an available resource and the corrosion to treatment facilities has been slowed down. The phosphorus and nitrogen resources can be recycled by other subsequent recycle recoveries. It offers a novel way for the wastewater treatment process in succession from photocatalysts' manufacture to contaminants disposal.

Highly efficient detection of ciprofloxacin in water using a nitrogen-doped carbon electrode fabricated through plasma modification

We developed a novel electrochemical sensor based on nitrogen plasma modification to effectively detect ciprofloxacin in water.

Emerging trends in sensors based on carbon nitride materials

A new class of functional materials, carbon nitrides, has recently attracted the attention of researchers.

Integrated BiPO4 nanocrystal/BiOBr heterojunction for sensitive photoelectrochemical sensing of 4-chlorophenol

A sensor platform was constructed by using a BiPO₄ nanocrystal/BiOBr heterojunction, which displayed superior performance for monitoring 4-chlorophenol.

Dahlia-shaped BiOClxI1-x structures prepared by a facile solid-state method: Evidence and mechanism of improved photocatalytic degradation of rhodamine B dye

A rapid and cheap solid-state chemical process was employed to synthesize BiOCl_xI_1-x (x=1.0, 0.75, 0.5, 0.25, 0) solid solutions with dahlia-shaped hierarchitectures. The dahlia-shaped BiOCl_xI_1-x hierarchitectures were effectively constructed by nanoplates with a thickness about 5-13nm. The band gap structure of the solid solutions can be modulated by adjusting the composition ratio of Cl and I, which has a significant effect on the photocatalytic activity of the solid solutions. The dahlia-shaped BiOCl_xI_1-x (x=0.75) solid solution exhibits excellent adsorption and effective photocatalytic performances for rhodamine B (RhB) under visible light irradiation, which degraded more than 98% of RhB within 60min under the visible light irradiation, it is higher than the reported bismuth oxyhalides materials. The trapping experiments confirmed that O^2- and h⁺ played the major role in the photocatalytic process and the possible photocatalytic reaction mechanism was illustrated.

Photoelectrochemical sensing of bisphenol a based on graphitic carbon nitride/bismuth oxyiodine composites

Graphitic carbon nitride/bismuth oxyiodine composites with excellent photoelectrochemical performance had been designed for sensitive PEC monitoring platform of bisphenol A.