Enhanced stability and activity of an antimicrobial peptide in conjugation with silver nanoparticle

Nanocomposites: silver nanoparticles and bacteriocins obtained from lactic acid bacteria against multidrug-resistant Escherichia coli and Staphylococcus aureus

Drug-resistant bacteria such as Escherichia coli and Staphylococcus aureus represent a global health problem that requires priority attention. Due to the current situation, there is an urgent need to develop new, more effective and safe antimicrobial agents. Biotechnological approaches can provide a possible alternative control through the production of new generation antimicrobial agents, such as silver nanoparticles (AgNPs) and bacteriocins. AgNPs stand out for their antimicrobial potential by employing several mechanisms of action that can act simultaneously on the target cell such as the production of reactive oxygen species and cell wall rupture. On the other hand, bacteriocins are natural peptides synthesized ribosomally that have antimicrobial activity and are produced, among others, by lactic acid bacteria (LAB), whose main mechanism of action is to produce pores at the level of the cell membrane of bacterial cells. However, these agents have disadvantages. Nanoparticles also have limitations such as the tendency to form aggregates, which decreases their antibacterial activity and possible cytotoxic effects, and bacteriocins have a narrow spectrum of action, require high doses to be effective, and can be degraded by proteases. Given these limitations, nanoconjugates of these two agents have been developed that can act synergistically in the control of pathogenic bacteria resistant to antibiotics. This review focuses on knowing relevant aspects of the antibiotic resistance of E. coli and S. aureus, the characteristics of these new generation antibacterial agents, and their effect alone or forming nanoconjugates that are more effective against the multiresistant mentioned bacteria.

Solid lipid nanoparticle formulation maximizes membrane-damaging efficiency of antimicrobial nisin Z peptide

Solid lipid nanoparticles (SLNs) can protect and deliver naturally derived or synthetic biologically active products to target sites in vivo. Here, an SLN formulation produces a measured four-fold reduction in inhibitory concentration of an antimicrobial peptide nisin Z against S. aureus as compared to the free peptide, indicating the successful delivery and enhanced effectiveness of the SLN-encapsulated bacteriocin. Spherical SLNs of size 79.47 ± 2.01 nm and zeta potential of -9.8 ± 0.3 mV were synthesised. The lipid formulation maximizes the membrane-damaging mode of action of the free peptide with more and larger-sized pores formed on bacterial membranes treated with nisin Z SLNs as measured from scanning electron microscopy and transmission electron microscopy. Flow cytometry measurements precisely quantified an enhanced dye leakage from pre-labeled bacterial cells when treated with nisin Z-loaded SLNs compared to free peptide. The lipid formulation accelerated cell death by killing all the cells within half an hour compared to the equivalent concentration of free peptide which was not bactericidal. Molecular dynamics simulations revealed a mechanism of SLN facilitated binding to the lipid II bacterial cell wall precursor via enhanced adsorption of nisin Z at the inner bacterial cell membrane bilayer. These findings confirmed the potential of SLN formulations for the effective delivery of therapeutic peptides for next-generation antibiotics that are active at low concentrations with the potential to mitigate antimicrobial resistance.

Advances in Transdermal Delivery of Antimicrobial Peptides for Wound Management: Biomaterial-Based Approaches and Future Perspectives

Antimicrobial peptides (AMPs), distinguished by their cationic and amphiphilic nature, represent a critical frontier in the battle against antimicrobial resistance due to their potent antimicrobial activity and a broad spectrum of action. However, the clinical translation of AMPs faces hurdles, including their susceptibility to degradation, limited bioavailability, and the need for targeted delivery. Transdermal delivery has immense potential for optimizing AMP administration for wound management. Leveraging the skin's accessibility and barrier properties, transdermal delivery offers a noninvasive approach that can circumvent systemic side effects and ensure sustained release. Biomaterial-based delivery systems, encompassing nanofibers, hydrogels, nanoparticles, and liposomes, have emerged as key players in enhancing the efficacy of transdermal AMP delivery. These biomaterial carriers not only shield AMPs from enzymatic degradation but also provide controlled release mechanisms, thereby elevating stability and bioavailability. The synergistic interaction between the transdermal approach and biomaterial-facilitated formulations presents a promising strategy to overcome the multifaceted challenges associated with AMP delivery. Integrating advanced technologies and personalized medicine, this convergence allows the reimagining of wound care. This review amalgamates insights to propose a pathway where AMPs, transdermal delivery, and biomaterial innovation harmonize for effective wound management.

Heterologous expression of the novel dimeric antimicrobial peptide LIG in Pichia pastoris

The antimicrobial peptide (AMP) LI is a fusion product of antimicrobial peptide LL37 produced by human neutrophils and Indolicidin secreted by bovine neutrophils. LI retained the antimicrobial activity of the parental peptides and showed high cell selectivity. In this study, the flexible linker Gly-Ser-Gly (G-S-G) was used to ligate LI into dimeric LIG, and constructed the Pichia pastoris (P. pastoris) expression vector pPIC9K-6×His-3×FLAG-LIG. The total protein expression of P. pastoris GS115 reached the highest level (189.6 mg/L) after 96 h induction with 3 % methanol at the initial pH value of 7.0. Finally, 5.9 mg/L of recombinant LIG (rLIG) was obtained after enterokinase digestion and purification. The rLIG had high antimicrobial activity and low hemolytic activity. Compared with monomer LI, GSG linked dimeric LIG, which had no significant change in antimicrobial activity and had good salt ions stability. In this study, the dimeric antimicrobial peptide LIG was successfully expressed, which provided a new idea for the expression of AMPs in the P. pastoris expression system, and had important significance for the application of AMPs.

Quantified instant conjugation of peptides on a nanogold surface for tunable ice recrystallization inhibition

The adverse effects of recrystallization limit the application of cryopreservation in many fields. Peptide-based materials play an essential role in the antifreezing area because of their excellent biocompatibility and abundant ice-binding sites. Peptide-gold nanoparticle conjugates can effectively reduce time and material costs through metal-thiol interactions, but controlled modification remains an outstanding issue, which makes it difficult to elucidate the antifreezing effects of antifreeze peptides at different densities and lengths. In this study, we developed an instant peptide capping on gold nanoparticles with butanol-assisted dehydration and provided a controllable quantitative coupling within a certain range. This chemical dehydration makes it possible to fabricate peptide-gold nanoparticle conjugates in large batches at minute levels. Based on this, the influence of the peptide density and sequence length on the antifreezing behaviors of the conjugates was investigated. The results evidenced that the antifreezing property of the flexible peptide conjugated on a rigid core is related to both the density and length of the peptide. In a certain range, the density is proportional to the antifreeze, while the length is negatively correlated with it. We proposed a rapidly controllable method for synthesizing peptide-gold nanoparticle conjugates, which may provide a universal approach for the development of subsequent recrystallization-inhibiting materials.

Multifunctional nanocoating for enhanced titanium implant osseointegration

Preventing bacterial infection and promoting osseointegration are essential for the long-term success of titanium (Ti) implants. In this study, we developed a multifunctional nanocoating on Ti mini-implants to simultaneously address these challenges. The nanocoating consists of self-assembled antimicrobial peptides GL13K and silver nanoparticles, referred to as Ag-GL. Our results showed that the Ag-GL coating did not alter the surface morphology of the mini-implants. Ag-GL coated mini-implants demonstrated a two orders of magnitude reduction in colony-forming unit (CFU) values compared to the noncoated eTi group, resulting in minimal inflammation and no apparent bone destruction in a bacterial infection in vivo model. When evaluating osseointegration properties, micro-CT analysis, histomorphometric analysis, and pull-out tests revealed that the Ag-GL coating significantly enhanced osseointegration and promoted new bone formation in vivo.

Conjugation of antimicrobial peptides to enhance therapeutic efficacy

The growing prevalence of antimicrobial resistance (AMR) has brought with it a continual increase in the numbers of deaths from multidrug-resistant (MDR) infections. Since the current arsenal of antibiotics has become increasingly ineffective, there exists an urgent need for discovery and development of novel antimicrobials. Antimicrobial peptides (AMPs) are considered to be a promising class of molecules due to their broad-spectrum activities and low resistance rates compared with other types of antibiotics. Since AMPs also often play major roles in elevating the host immune response, the molecules may also be called "host defense peptides." Despite the great promise of AMPs, the majority remain unsuitable for clinical use due to issues of structural instability, degradation by proteases, and/or toxicity to host cells. Moreover, AMP activities in vivo can be influenced by many factors, such as interaction with blood and serum biomolecules, physiological salt concentrations or different pH values. To overcome these limitations, structural modifications can be made to the AMP. Among several modifications, physical and chemical conjugation of AMP to other biomolecules is widely considered an effective strategy. In this review, we discuss structural modification strategies related to conjugation of AMPs and their possible effects on mode of action. The conjugation of fatty acids, glycans, antibiotics, photosensitizers, polymers, nucleic acids, nanoparticles, and immobilization to biomaterials are highlighted.

Strong infiltrative HHC36 antimicrobial peptide/silver nanoparticles-loaded carboxymethyl chitosan/sodium alginate hydrogel for acne vulgaris therapy

Acne is a common chronic skin inflammatory disease closely related toCutibacterium acnes(C. acnes), which affects the life quality of patients worldwide, especially adolescents and young adults. However, the physical barrier of the skin makes drugs difficult to infiltrate effectively into infected site, causing acne hard to cure and easy to recur. Herein, we developed an antibacterial skin dressing with strong infiltration of antibacterial agents which can co-delivery small-molecular antimicrobial agents through stratum corneum deeply into dermis, achieving high antimicrobial efficacy. The antibacterial dressings were constructed with carboxymethyl chitosan/sodium alginate (CMCS/SA) hydrogel loading with HHC36 (an antimicrobial peptide) and silver nanoparticles (AgNPs) conjugates (Ag-H2/CMCS/SA hydrogel). The released Ag-H2from Ag-H2/CMCS/SA hydrogel can early infiltrate into dermis, co-delivery HHC36 and AgNPs due to the infiltration and targeting of HHC36, presenting the superior antibacterial effect compared to HHC36 or AgNPs alone and killing 100%C. acnesand 100%Staphylococcus epidermidis(S. epidermidis) at a very low concentration of Ag-H2(15μg ml-1A g with 7.1μg ml-1HHC36). Meanwhile, Ag-H2/CMCS/SA hydrogel was biocompatible due to the natural polysaccharides carboxymethyl chitosan and sodium alginate. The HaCaT cells spread well in Ag-H2/CMCS/SA hydrogel. These results indicate that the co-delivery small-molecular antimicrobial agents is a promising strategy and Ag-H2/CMCS/SA hydrogel has a great potential in the therapy of acne.

Comparison of the Antibacterial Effect of Silver Nanoparticles and a Multifunctional Antimicrobial Peptide on Titanium Surface

Titanium implantation success may be compromised by Staphylococcus aureus surface colonization and posterior infection. To avoid this issue, different strategies have been investigated to promote an antibacterial character to titanium. In this work, two antibacterial agents (silver nanoparticles and a multifunctional antimicrobial peptide) were used to coat titanium surfaces. The modulation of the nanoparticle (≈32.1 ± 9.4 nm) density on titanium could be optimized, and a sequential functionalization with both agents was achieved through a two-step functionalization method by means of surface silanization. The antibacterial character of the coating agents was assessed individually as well as combined. The results have shown that a reduction in bacteria after 4 h of incubation can be achieved on all the coated surfaces. After 24 h of incubation, however, the individual antimicrobial peptide coating was more effective than the silver nanoparticles or their combination against Staphylococcus aureus. All tested coatings were non-cytotoxic for eukaryotic cells.

Nanomedicine for drug resistant pathogens and COVID-19 using mushroom nanocomposite inspired with bacteriocin – A Review

Multidrug resistant (MDR) pathogens have become a major global health challenge and have severely threatened the health of society. Current conditions have gotten worse as a result of the COVID-19 pandemic, and infection rates in the future will rise. It is necessary to design, respond effectively, and take action to address these challenges by investigating new avenues. In this regard, the fabrication of metal NPs utilized by various methods, including green synthesis using mushroom, is highly versatile, cost-effective, eco-compatible, and superior. In contrast, biofabrication of metal NPs can be employed as a powerful weapon against MDR pathogens and have immense biomedical applications. In addition, the advancement in nanotechnology has made possible to modify the nanomaterials and enhance their activities. Metal NPs with biomolecules composite to prevents their microbial adhesion and kills the microbial pathogens through biofilm formation. Bacteriocin is an excellent antimicrobial peptide that works well as an augmentation substance to boost the antimicrobial effects. As a result, we concentrate on the creation of new, eco-compatible mycosynthesized metal NPs with bacteriocin nanocomposite via electrostatic, covalent, or non-covalent bindings. The synergistic benefits of metal NPs with bacteriocin to combat MDR pathogens and COVID-19, as well as other biomedical applications, are discussed in this review. Moreover, the importance of the adverse outcome pathway (AOP) in risk analysis of manufactured metal nanocomposite nanomaterial and their future possibilities also discussed.

Silver-Nanoparticle-Embedded Short Amphiphilic Peptide Nanostructures and Their Plausible Application to Reduce Bacterial Infections

The microbiota-gut-brain axis (GBA) plays a critical role in the development of neurodegenerative diseases. Dysbiosis of the intestinal microbiome causes a significant alteration in the gut microbiota of Alzheimer's disease (AD) patients, followed by neuroinflammatory processes. Thus, AD beginning in the gut is closely related to an imbalance in gut microbiota, and hence a multidomain approach to reduce this imbalance by exerting positive effects on the gut microbiota is needed. In one example, a tyrosine-based short peptide amphiphile (sPA) was used to synthesize antibacterial AgNPs-sPA nanostructures. Such nanostructures showed high biocompatibility and low cytotoxicity, and therefore work as model drug delivery agents for addressing local bacterial infections. These may have therapeutic value for the treatment of microbiota-triggered progression of neurodegenerative diseases.

Immobilization Systems of Antimicrobial Peptide Ib−M1 in Polymeric Nanoparticles Based on Alginate and Chitosan

The development of new strategies to reduce the use of traditional antibiotics has been a topic of global interest due to the resistance generated by multiresistant microorganisms, including Escherichia coli, as etiological agents of various diseases. Antimicrobial peptides are presented as an alternative for the treatment of infectious diseases caused by this type of microorganism. The Ib−M1 peptide meets the requirements to be used as an antimicrobial compound. However, it is necessary to use strategies that generate protection and resist the conditions encountered in a biological system. Therefore, in this study, we synthesized alginate and chitosan nanoparticles (Alg−Chi NPs) using the ionic gelation technique, which allows for the crosslinking of polymeric chains arranged in nanostructures by intermolecular interactions that can be either covalent or non-covalent. Such interactions can be achieved through the use of crosslinking agents that facilitate this binding. This technique allows for immobilization of the Ib−M1 peptide to form an Ib−M1/Alg−Chi bioconjugate. SEM, DLS, and FT-IR were used to determine the structural features of the nanoparticles. We evaluated the biological activity against E. coli ATCC 25922 and Vero mammalian cells, as well as the stability at various temperatures, pH, and proteases, of Ib−M1 and Ib−M1/Alg-Chi. The results showed agglomerates of nanoparticles with average sizes of 150 nm; an MIC of 12.5 µM, which was maintained in the bioconjugate; and cytotoxicity values close to 40%. Stability was maintained against pH and temperature; in proteases, it was only evidenced against pepsin in Ib−M1/Alg-Chi. The results are promising with respect to the use of Ib−M1 and Ib−M1/Alg−Chi as possible antimicrobial agents.

Targeting necroptosis as an alternative strategy in tumor treatment: From drugs to nanoparticles

Over last decades, most antitumor therapeutic strategies have focused on apoptosis, however, apoptosis resistance and immunological silence usually led to treatment failure. In this sense, triggering other programmed cell death such as necroptosis may achieve a better therapeutic efficacy and has gained widespread attentions in tumor therapy. Studies in this field have identified several types of necroptosis modulators and highlighted the therapeutic potential of necroptotic cell death in cancer. Nanoparticles further provide possibilities to improve therapeutic outcomes as an efficient drug delivery system, facilitating tumor targeting and controlled cargo release. Furthermore, some nanoparticles themselves can trigger/promote programmed necrosis through hyperthermia, ultrasound and autophagy blockage. These investigations have entered necroptosis for consideration as a promising strategy for tumor therapy, though numerous challenges remain and clinical applications are still distant. In this review, we would briefly introduce molecular mechanism and characteristics of necroptosis, and then summarize recent progress of programmed necrosis and their inducers in tumor therapy. Furthermore, the antitumor strategies that take advantages of nanoparticles to induce necroptosis are also discussed.

Present status and future directions of intracanal medicaments

Two fundamental goals of endodontic treatment are to prevent or treat apical periodontitis. From a predictive perspective, several variables can affect the outcome of root canal treatment. Some of these variables depend on intraoperative factors, which include irrigation technique, size of the apical preparation, use of intracanal medicaments or the number of appointments necessary to complete the treatment. However, the outcome may also be affected by host and microbial factors. The intensity of periradicular bone loss or tissue damage, the presence of preoperative pain and associated conditions such as mechanical allodynia and central sensitization, the anatomical complexity of the apical portion of the canal, and the virulence and longevity of the bacterial infection can all have a profound influence on the outcome. Furthermore, numerous medical conditions have been reported to decrease the capability of the immune system to heal the periapical tissues. It is the clinician's responsibility to analyse these variables and incorporate them into the disinfection strategy to maximize the chances of healing. This narrative review will focus on the present status of intracanal medicaments, the clinical indications for their use and future directions for research.

Hybrid nanocoatings of self-assembled organic-inorganic amphiphiles for prevention of implant infections

Antimicrobial coatings are one of the most promising strategies to prevent bacterial infections in orthopedic and dental implants. Combining antimicrobial agents with different antimicrobial mechanisms might have synergistic effects and be more potent. Others have shown that nanocomposites of silver nanoparticles (AgNPs) decorated with antimicrobial peptides (AMPs) show increased potency as free agents in solution. However, similar nanocomposites have not been explored to coat biomaterials through cooperative weak electrostatic attraction forces between AMP, AgNPs and substrates in need of protection against infection. In this work, we synthesized self-assembled antimicrobial amphiphiles of an AMP, GL13K. Then, we decorated the AMP nanostructures with AgNPs, which were finally used to coat etched Ti (eTi) surfaces. The strong hydrogen bonding between the AMP amphiphiles and the polar eTi yielded a robust and stable coating. When compared to single AgNP or single AMP coatings, our hybrid nanocoatings had notably higher in vitro antimicrobial potency against multiple bacteria strains related to implant infection. The hybrid coating also showed relevant antimicrobial activity in an in vivo subcutaneous infection model in rats. This work advances the application of AgNP/AMP nanocomposites as effective coatings for prevention of implant infections. STATEMENT OF SIGNIFICANCE: High morbidity, mortality and elevated costs are associated with orthopedic and dental implant infections. Conventional antibiotic treatment is ineffective due to barrier-like extracellular polymeric substances in biofilms and the increasing threat from antibiotic resistance. Antimicrobial coatings are one of the most promising strategies, but the performance is usually unsatisfactory, especially when tested in vivo. Here, we present a hybrid nanocoating with different modes of action to prevent implant infections using self-assembled antimicrobial peptide (AMP) amphiphiles decorated with silver nanoparticles (AgNPs). When compared to single AgNP or AMP coatings, our hybrid nanocoatings showed significant increases in antimicrobial potency against multiple implant infection-related bacterial strains in vitro and in an in vivo rat subcutaneous infection model.

Nanoencapsulated Lippia rotundifolia antimicrobial peptide: synthesis, characterization, antimicrobial activity, and cytotoxicity evaluations

Antimicrobial peptides (AMP) are promising novel antibiotics but exhibit low stability and can be toxic. The AMP encapsulation can be used to protect the drug and control its release rates. The Lr-AMP1f encapsulated into chitosan nanoparticle (NP) by ionic gelation method reached 90% efficiency. The results indicated that the hydrodynamic particle size of NPs increased from 196.1 ± 3.14 nm (free NP) to 228.1 ± 12.22 nm (nanoencapsulated Lr-AMP1f), while the atomic force microscope showed the spherical shape. The Zeta potential of the nanoencapsulated Lr-AMP1f was high (+ 35 mV). These AMP-loaded NPs exhibited stability for up to 21 days of storage. The minimum inhibitory concentration (MIC) of free Lr-AMP1f was 8 µg/mL for E. coli and S. epidermidis. However, the nanoencapsulated Lr-AMP1f produced a bacteriostatic effect against both bacteria at 8 µg/mL. The MIC of nanoencapsulated Lr-AMP1f was 16 µg/mL for E. coli and 32 for S. epidermidis. Nanoencapsulated Lr-AMP1f was nontoxic to HEK293 cells. Promisingly, chitosan NP can be used as a vehicle for the antibacterial application of new AMP (Lr-AMP1f).

Nanoparticles approach to eradicate bacterial biofilm-related infections: A critical review

Biofilm represents one of the crucial factors for the emergence of multi-drug resistance bacterial infections. The high mortality, morbidity and medical device-related infections are associated with biofilm formation, which requires primarily seek alternative treatment strategies. Recently, nanotechnology has emerged as a promising method for eradicating bacterial biofilm-related infection. The efficacy of nanoparticles (NPs) against bacterial infections interest great attention, and the researches on the subject are rapidly increasing. However, the majority of studies continue to focus on the antimicrobial effects of NPs in vitro, while only a few achieved in vivo and very few registered as clinical trials. The present review aimed to organize the scattered available information regarding NPs approach to eradicate bacterial biofilm-related infections. The current review highlighted the advantages and disadvantages associated with this approach, in addition to the challenges that prevent reaching the clinical applications. It was appeared that the production of NPs either as antimicrobials or as drug carriers requires further investigations to overcome the obstacles associated with their kinetic and biocompatibility.

Defensins: The natural peptide antibiotic

Defensins are a family of cationic antimicrobial peptides active against a broad range of infectious microbes including bacteria, viruses and fungi, playing important roles as innate effectors and immune modulators in immunological control of microbial infection. Their antibacterial properties and unique mechanisms of action have garnered considerable interest in developing defensins into a novel class of natural antibiotic peptides to fend off pathogenic infection by bacteria, particularly those resistant to conventional antibiotics. However, serious pharmacological and technical obstacles, some of which are unique to defensins and others are common to peptide drugs in general, have hindered the development and clinical translation of defensins as anti-infective therapeutics. To overcome them, several technologies have been developed, aiming for improved functionality, prolonged circulation time, enhanced proteolytic stability and bioavailability, and efficient and controlled delivery and release of defensins to the site of infection. Additional challenges include the alleviation of potential toxicity of defensins and their cost-effective manufacturing. In this review, we briefly introduce defensin biology, focus on various transforming strategies and practical techniques developed for defensins and their derivatives as antibacterial therapeutics, and conclude with a summation of future challenges and possible solutions.

Ceragenin-Coated Non-Spherical Gold Nanoparticles as Novel Candidacidal Agents

BACKGROUND

Infections caused by Candida spp. have become one of the major causes of morbidity and mortality in immunocompromised patients. Therefore, new effective fungicides are urgently needed, especially due to an escalating resistance crisis.

METHODS

A set of nanosystems with rod- (AuR), peanut- (AuP), and star-shaped (AuS) metal cores were synthesized. These gold nanoparticles were conjugated with ceragenins CSA-13, CSA-44, and CSA-131, and their activity was evaluated against Candida strains (n = 21) through the assessment of MICs (minimum inhibitory concentrations)/MFCs (minimum fungicidal concentrations). Moreover, in order to determine the potential for resistance development, serial passages of Candida cells with tested nanosystems were performed. The principal mechanism of action of Au NPs was evaluated via ROS (reactive oxygen species) generation assessment, plasma membrane permeabilization, and release of the protein content. Finally, to evaluate the potential toxicity of Au NPs, the measurement of hemoglobin release from red blood cells (RBCs) was carried out.

RESULTS

All of the tested nanosystems exerted a potent candidacidal activity, regardless of the species or susceptibility to other antifungal agents. Significantly, no resistance development after 25 passages of Candida cells with AuR@CSA-13, AuR@CSA-44, and AuR@CSA-131 nanosystems was observed. Moreover, the fungicidal mechanism of action of the investigated nanosystems involved the generation of ROS, damage of the fungal cell membrane, and leakage of intracellular contents. Notably, no significant RBCs hemolysis at candidacidal doses of tested nanosystems was detected.

CONCLUSIONS

The results provide rationale for the development of gold nanoparticles of rod-, peanut-, and star-shaped conjugated with CSA-13, CSA-44, and CSA-131 as effective candidacidal agents.

Conjugation of Silver Nanoparticles with De Novo Engineered Cationic Antimicrobial Peptides: An Exploratory Proposal

Background

Cationic antimicrobial peptides have broad antimicrobial activity and provide a novel way of targeting multidrug-resistant bacteria in the era of increasing antimicrobial resistance. Current developments show positive prospects for antimicrobial peptides and silver nanoparticles (AgNPs) individually.

Objective

The primary objective is to propose another method for enhancing antimicrobial activity by conjugating AgNPs with cationic antimicrobial peptides, with a subsequent preliminary assessment of the minimum inhibitory concentration of multidrug-resistant bacteria. The secondary objective is to evaluate the safety of the conjugated compound and assess its viability for in vivo use.

Methods

The proposal involves 3 stages. First, WLBU2C, a modified version of the antimicrobial peptide WLBU2 with an added cysteine group, needs to be synthesized using a standard Fmoc procedure. It can then be stably conjugated with AgNPs ideally through photochemical means. Second, the WLBU2C-AgNP conjugate should be tested for antimicrobial activity according to the Clinical & Laboratory Standards Institute manual on standard minimum inhibitory concentration testing. Third, the cytotoxicity of the conjugate should be tested using cell lysis assays if the above stages are completed.

Results

I-TASSER (iterative threading assembly refinement) simulation revealed that the modified peptide WLBU2C has a secondary structure similar to that of the original WLBU2 peptide. No other results have been obtained at this time.

Conclusions

The addition of AgNPs to already developed de novo–engineered antimicrobial peptides provides an opportunity for the development of potent antimicrobials. Future prospects include emergency last-line therapy and treatment for current difficult-to-eradicate bacterial colonization, such as in cystic fibrosis, implantable medical devices, cancer, and immunotherapy. As I do not anticipate funding at this time, I hope this proposal provides inspiration to other researchers.

International Registered Report Identifier (IRRID)

PRR1-10.2196/28307

Agarose oligosaccharide- silver nanoparticle- antimicrobial peptide- composite for wound dressing

Marine polysaccharides or oligosaccharides have potential to promote wound healing due to their biocompatibility and physicochemical properties. However, microbial infection delays wound healing process, and novel antimicrobial wound dressings are urgently needed. Here, agarose oligosaccharides (AGO) obtained from marine red algae were used as a reducing and stabilizer for green synthesis of silver nanoparticles (AgNPs), and further successfully connected with odorranain A (OA), one of antimicrobial peptides (AMPs), to obtain a novel composite nanomaterial (AGO-AgNPs-OA). Transmission electron microscopy (TEM) and Malvern particle size analyzer showed that AGO-AgNPs-OA was spherical or elliptic with average size of about 100 nm. Circular dichroism (CD) spectroscopy showed that AGO-AgNPs stabilized the α-helical structure of OA. AGO-AgNPs-OA showed stronger anti-bacterial activities than AGO-AgNPs, and had good biocompatibility and significant promoting effect on wound healing. Our data suggest that AMPs conjugated marine oligosaccharides and AgNPs may be effective and safe antibacterial materials for wound therapy.

Charge-reversal silver clusters for targeted bacterial killing

Bacterial infections have become a common global health problem, causing a wide range of properties and life loss. The development of a highly efficient, low-toxicity and targeted bacterial agent is urgently needed. As a conventional antibacterial agent, silver nanoparticles have been used for a long time, but they are still unable to achieve targeted bacterial killing. Herein, we have prepared surface positively (Ag(+) nanoparticles) and negatively (Ag(-) nanoparticles) charged silver nanoparticles by reduction of AgNO3 to construct Ag(-)/Ag(+) clusters. The zeta potential of the Ag(-)/Ag(+) nanoclusters could be controlled by changing the ratio of Ag(-) nanoparticles to Ag(+) nanoparticles. The surface negatively changed silver nanoparticles were prepared from the reaction of methyl maleic anhydride with the amino on the surface positively changed silver nanoparticles. In the acidic environment, Ag(-) nanoparticles undergo charge reversal, and Ag(-)/Ag(+) clusters with negatively charged nanoparticles and big-size are transformed into positively charged nanoparticles with small size. The in vitro experimental results demonstrate that the positively charged nanoparticles can be well adsorbed on the negatively charged bacteria, exhibiting a high bactericidal ability. Furthermore, the in vivo skin wound healing experiment showed that the Ag(-)/Ag(+) clusters could serve as an efficient antibacterial agent to combat bacterial infection.

Antimicrobial peptides towards clinical application: Delivery and formulation

Antimicrobial peptides hold promise to supplement small molecules antibiotics and combat the multidrug resistant microbes. There are however technical hurdles towards the clinical applications, largely due to the inherent limitations of peptides including stability, cytotoxicity and bioavailability. Here we review recent studies concerning the delivery and formulation of antimicrobial peptides, by categorizing the different strategies as driven by physical interactions or chemical conjugation reactions, and carriers ranging from inorganic based ones (including gold, silver and silica based solid nanoparticles) to organic ones (including micelle, liposome and hydrogel) are covered. Besides, targeted delivery of antimicrobial peptides or using antimicrobial peptides as the targeting moiety, and responsive release of the peptides after delivery are also reviewed. Lastly, strategies towards the increase of oral bioavailability, from both physical or chemical methods, are highlighted. Altogether, this article provides a comprehensive review of the recent progress of the delivery and formulation of antimicrobial peptides towards clinical application.

Enhanced Antibacterial and Anti-Biofilm Activities of Antimicrobial Peptides Modified Silver Nanoparticles

Background

The biofilms could protect bacteria from antibiotics and promote the production of drug-resistant strains, making the bacteria more difficult to be eradicated. Thus, we developed an AMP@PDA@AgNPs nanocomposite, which is formed by modifying silver nanoparticles (AgNPs) with antimicrobial peptides (AMP) modified nanocomposite to destroy biofilm in this study.

Methods

The AMP@PDA@AgNPs nanocomposite was prepared with polymerization method and characterized by using ultraviolet-visible (UV-vis) spectroscopy, dynamic light scattering (DLS), Fourier transform-infrared spectroscopy (FT-IR), and transmission electron microscope (TEM). The antibacterial effects of the nanocomposite were investigated by using agar diffusion method and minimum inhibitory concentration (MIC) test. The quantitative analysis of the biofilm formation by the nanocomposite was conducted using crystal violet staining and confocal laser scanning microscope (CLSM).

Results

The DLS and TEM analysis showed it was a spherical nanocomposite with 200 nm size and well dispersed . The results of UV-vis and FT-IR confirmed the presence of AMP and AgNPs. The nanocomposite had an excellent biocompatibility at 100 μg/mL. And the AMP@PDA@AgNPs nanocomposite showed superior antimicrobial activity against both Gram-negative (E. coli, P. aeruginosa) and Gram-positive (S. aureus) bacteria than AgNPs or AMP. Importantly, the mRNA expression of biofilm-related genes were decreased under the action of the nanocomposites.

Conclusion

An AMP@PDA@AgNPs nanocomposite with good biocompatibility was successfully prepared. The nanocomposite could destruct bacterial biofilms by inhibiting the expression of biofilm-related genes. The synergistic strategy of AMPs and AgNPs could provide a new perspective for the treatment of bacterial infection.

Antimicrobial Peptides and Proteins: From Nature's Reservoir to the Laboratory and Beyond

Rapid rise of antimicrobial resistance against conventional antimicrobials, resurgence of multidrug resistant microbes and the slowdown in the development of new classes of antimicrobials, necessitates the urgent development of alternate classes of therapeutic molecules. Antimicrobial peptides (AMPs) are small proteins present in different lifeforms in nature that provide defense against microbial infections. They have been effective components of the host defense system for a very long time. The fact that the development of resistance by the microbes against the AMPs is relatively slower or delayed compared to that against the conventional antibiotics, makes them prospective alternative therapeutics of the future. Several thousands of AMPs have been isolated from various natural sources like microorganisms, plants, insects, crustaceans, animals, humans, etc. to date. However, only a few of them have been translated commercially to the market so far. This is because of some inherent drawbacks of the naturally obtained AMPs like 1) short half-life owing to the susceptibility to protease degradation, 2) inactivity at physiological salt concentrations, 3) cytotoxicity to host cells, 4) lack of appropriate strategies for sustained and targeted delivery of the AMPs. This has led to a surge of interest in the development of synthetic AMPs which would retain or improve the antimicrobial potency along with circumventing the disadvantages of the natural analogs. The development of synthetic AMPs is inspired by natural designs and sequences and strengthened by the fusion with various synthetic elements. Generation of the synthetic designs are based on various strategies like sequence truncation, mutation, cyclization and introduction of unnatural amino acids and synthons. In this review, we have described some of the AMPs isolated from the vast repertoire of natural sources, and subsequently described the various synthetic designs that have been developed based on the templates of natural AMPs or from de novo design to make commercially viable therapeutics of the future. This review entails the journey of the AMPs from their natural sources to the laboratory.

Nanomedicine-based antimicrobial peptide delivery for bacterial infections: recent advances and future prospects

Background

Antimicrobial peptides (AMPs) have gained wide interest as viable alternatives to antibiotics owing to their potent antimicrobial effects and the low propensity of resistance development. However, their physicochemical properties (solubility, charge, hydrophobicity/hydrophilicity), stability issues (proteolytic or enzymatic degradation, aggregation, chemical degradation), and toxicities (interactions with blood components or cellular toxicities) limit their therapeutic applications.

Area covered

Nanomedicine-based therapeutic delivery is an emerging concept. The AMP loaded nanoparticles have been prepared and investigated for their antimicrobial effects. In this review, we will discuss different nanomedicine-based AMP delivery systems including metallic nanoparticles, lipid nanoparticles, polymeric nanoparticles, and their hybrid systems along with their future prospects for potent antimicrobial efficacy.

Expert opinion

Nanomedicine-based AMP delivery is a recent approach to the treatment of bacterial infections. The advantageous properties of nanoparticles including the enhancement of AMP stability, controlled release, and targetability make them suitable for the augmentation of AMP activity. Modifications in the nanomedicine-based approach are required to overcome the problems of nanoparticle instability, shorter residence time, and toxicity. Future rigorous studies for both the AMP loaded nanoparticle preparation and characterization, and detailed evaluations of their in vitro and in vivo antimicrobial effects and toxicities, are essential.

Advances of peptides for antibacterial applications

In the past few decades, peptide antibacterial products with unique antibacterial mechanisms have attracted widespread interest. They can effectively reduce the probability of drug resistance of bacteria and are biocompatible, so they possess tremendous development prospects. This review provides recent research and analysis on the basic types of antimicrobial peptides (including poly (amino acid)s, short AMPs, and lipopeptides) and factors to optimize antimicrobial effects. It also summarizes the two most important modes of action of antimicrobial peptides and the latest developments in the application of AMPs, including antimicrobial agent, wound healing, preservative, antibacterial coating and others. Finally, we discuss the remaining challenges to improve the antibacterial peptides and propose prospects in the field.

Rediscovery of antimicrobial peptides as therapeutic agents

In recent years, the occurrence of antibiotic-resistant pathogens is increasing rapidly. There is growing concern as the development of antibiotics is slower than the increase in the resistance of pathogenic bacteria. Antimicrobial peptides (AMPs) are promising alternatives to antibiotics. Despite their name, which implies their antimicrobial activity, AMPs have recently been rediscovered as compounds having antifungal, antiviral, anticancer, antioxidant, and insecticidal effects. Moreover, many AMPs are relatively safe from toxic side effects and the generation of resistant microorganisms due to their target specificity and complexity of the mechanisms underlying their action. In this review, we summarize the history, classification, and mechanisms of action of AMPs, and provide descriptions of AMPs undergoing clinical trials. We also discuss the obstacles associated with the development of AMPs as therapeutic agents and recent strategies formulated to circumvent these obstacles.

Combining Antimicrobial Peptides with Nanotechnology: An Emerging Field in Theranostics

The emergence of multidrug-resistant pathogens and their rapid adaptation against new antibiotics is a major challenge for scientists and medical professionals. Different approaches have been taken to combat this problem, which includes rationally designed potent antimicrobial peptides (AMPs) and several nanoparticles and quantum dots. AMPs are considered as a new generation of super antibiotics that hold enormous potential to fight against bacterial resistance by the rapidly killing planktonic as well as their biofilm form while keeping low toxicity profile against eukaryotic cells. Various nanoparticles and quantum dots have proved their effectiveness against a vast array of infections and diseases. Conjugation and functionalization of nanoparticles with potentially active antimicrobial peptides have added advantages that widen their applications in the field of drug discovery as well as delivery system including imaging and diagnostics. This article reviews the current progress and implementation of different nanoparticles and quantum dots conjugated antimicrobial peptides in terms of bio-stability, drug delivery, and therapeutic applications.

Nano-vehicles give new lease of life to existing antimicrobials

Antibiotic resistance has become one of the greatest challenges for modern medicine, and new approaches for the treatment of bacterial infections are urgently needed to avoid widespread vulnerability again to infections that have so far been easily treatable with existing drugs. Among the many approaches investigated to overcome this challenge is the use of engineered nanostructures for the precise and targeted delivery of existing antimicrobial agents in a fashion that will potentiate their effect. This idea leans on lessons learned from pioneering research in cancer, where the targeted delivery of anti-cancer drugs to mammalian cells has been a topic for some time. In particular, new research has demonstrated that nanomaterials can be functionalised with active antimicrobials and, in some cases, with targeting molecules that potentiate the efficiency of the antimicrobials. In this mini-review, we summarise results that demonstrate the potential for nanoparticles, dendrimers and DNA nanostructures for use in antimicrobial delivery. We consider material aspects of the delivery vehicles and ways in which they can be functionalised with antibiotics and antimicrobial peptides, and we review evidence for their efficacy to kill bacteria both in vitro and in vivo. We also discuss the advantages and limitations of these materials and highlight the benefits of DNA nanostructures specifically for their versatile potential in the present context.

Nanoformulation approach for improved stability and efficiency of lactoperoxidase

Lactoperoxidase is a glycosylated protein with a molecular mass of 78 kDa, which being excreted in several mammalian secretions. Lactoperoxidase is included in many biological processes and well-known to have biocidal actions, attending as active antibiotics and antiviral agents. This wide-spectrum of biocidal activities mediates via a definite inhibitory system named lactoperoxidase system which acts a potent role in the innate immune response since its activity is not restricted by the antimicrobial effect, but might act a significant role in the hydrolysis of many toxins like aflatoxin. Hence with the current progresses in technology, nanoparticles can offer chances as an active candidate that might be utilized for stabilizing and potentiating the activity of LPO for use in several applications. Due to the variability functions of LPO, this enzyme considers an active target to be encapsulated or coated to NPs for developing novel nanocombinations with controlled surface characteristics. The development of approaches which might enhance conformational stabilization for several weeks of LPO via nanoformulation could improve the biopharmaceutical applicability of this bioactive ingredient. Nanoformulation of LPO enhances novel functions that can be useful in many biotechnological applications like food industry, cosmetic and pharmaceutical applications or to deliver and encapsulate bioactive components.

Characterization of alginate-capped nanosilver by fractal and entropy analysis on its transmission electron microphotographs

The study employs conventional techniques and quantitative image analysis tools to characterize alginate-capped nanosilver synthesized by green methods. Sodium Alginate (0.5 %, 1 % and 2 %) was used as a reducing and stabilizing agent. Presence of particles was confirmed by UV-vis Spectroscopy, with absorbance maxima of 412-413 nm for 0.5 %, 1 % and 2 % of polymer. Hydrodynamic sizes of particles recorded for 0.5 %, 1 % and 2 % polymer were 128.4 ± 1.5, 129.9 ± 3.6 and 148.6 ± 1.0 nm by DLS. TEM revealed roughly spherical to cuboidal particles ranging from 15-20 nm and clusters of 100 nm and Energy Dispersive X-ray Spectroscopy confirmed the presence of silver in the particles. Analysis of the TEM images was done in MATLAB R2016b using histogram equalisation for image enhancement and entropy filtering for image segmentation. These techniques revealed the surface pores and polymer distribution around the particle. Statistical analysis (ANOVA) was performed for the measured fractal dimensions of nanoparticles with polymer coating, width of particle together with polymer coating, and thickness of only polymer coating around the particle for various study groups. Significant differences (p < 0.05) were found both between and within the study groups for fractal dimensions of nanoparticles with polymer coating, width of nanoparticles and thickness of polymer coating alone. The analysis was successful in confirming presence and thickness of polymer layer on particles.

Enhanced cytotoxicity of highly water-soluble gold nanoparticle-cyclopeptide conjugates in cancer cells

Conjugation of cytostatic drugs to nanomaterials seeks to improve their low bioavailability and selectivity to overcome the important associated side effects. In this work, we aimed to synthesize water-soluble gold nanoparticles as transporters for synthetic cyclic peptides with a potential anticancer activity but with a limited bioavailability. The highly water-soluble nanoparticles (2.5 nm diameter gold core) are coated with a mixture of polyethylene glycol linkers, one bearing a terminal hydroxyl group for increasing dispersibility in water, and the second bearing a carboxylic acid group for peptide conjugation through amide bond formation. Peptide-functionalized particles have a 9.7 ± 1.8 nm hydrodynamic diameter and are highly water-soluble and stable in solution for at least one year. The morphology of the gold cores as well as their organic coating was studied using Transmission Electron Microscopy, showing that the attachment of a limited number of peptides per nanoparticle leads to a uneven organic coating of two different thicknesses, one of 2.0 ± 0.6 nm formed by polyethylene glycol linkers, and a second of 3.6 ± 0.5 nm which includes the peptide. GNP significantly enhance the internalization of the cyclic peptide BPC734 in cells as compared to peptide in solution, with improved uptake in cancerous HT29 cells. Cytotoxicity studies show that peptide BPC734 in solution is toxic in the micromolar range, whereas peptide-functionalized particles are toxic at nanomolar peptide concentrations and with a significantly higher toxicity for cancerous cells. All these results, besides the stability and expected passive tumor targeting, make these particles a promising option for improving the bioavailability, efficacy, and selectivity in cancer therapy.

Very Strong, Super-Tough, Antibacterial, and Biodegradable Polymeric Materials with Excellent UV-Blocking Performance

In this work, inspired by the dynamic sacrificial hydrogen bonds in biological materials, a very strong, super-tough, antibacterial, and cost-effective biodegradable poly(vinyl alcohol) (PVA) nanocomposite material was developed by incorporating the nanoscale antibacterial agent TA@LS-Ag. TA@LS-Ag was prepared from the green biomass tannic acid (TA) and sodium lignosulfonate (LS), and was facilely incorporated into the PVA matrix with a homogeneously interspersed nanoparticle size of about 20 nm. The PVA nanocomposite film with 2 wt % addition of TA@LS-Ag achieved the highest specific toughness of 262 J g^-1 among the PVA-based films to date, which is far higher than that of natural spider silk (150-190 J g^-1 ), as well as a very high tensile strength of 131.6 MPa. The excellent tensile strength and superior toughness were attributed to synergy of the nanophase separation structure and the intense hydrogen-bonding interactions between the nanoparticles and PVA matrix. The PVA/TA@LS-Ag nanocomposite films exhibited good antibacterial properties, despite the extremely low silver content (0.032-0.32 wt ‰). TA@LS-Ag also endowed the PVA films with excellent antioxidant and UV-shielding performance. As the biomass-derived LS and TA and the PVA matrix are all biodegradable, this work offers a facile strategy for preparing high-performance antibacterial and biodegradable polymeric materials.

An Update on Antimicrobial Peptides (AMPs) and Their Delivery Strategies for Wound Infections

Bacterial infections occur when wound healing fails to reach the final stage of healing, which is usually hindered by the presence of different pathogens. Different topical antimicrobial agents are used to inhibit bacterial growth due to antibiotic failure in reaching the infected site, which is accompanied very often by increased drug resistance and other side effects. In this review, we focus on antimicrobial peptides (AMPs), especially those with a high potential of efficacy against multidrug-resistant and biofilm-forming bacteria and fungi present in wound infections. Currently, different AMPs undergo preclinical and clinical phase to combat infection-related diseases. AMP dendrimers (AMPDs) have been mentioned as potent microbial agents. Various AMP delivery strategies that are used to combat infection and modulate the healing rate-such as polymers, scaffolds, films and wound dressings, and organic and inorganic nanoparticles-have been discussed as well. New technologies such as Clustered Regularly Interspaced Short Palindromic Repeat (CRISPR)-associated protein (CRISPR-Cas) are taken into consideration as potential future tools for AMP delivery in skin therapy.

Rational Design of Functional Peptide-Gold Hybrid Nanomaterials for Molecular Interactions

Gold nanoparticles (AuNPs) have been extensively used for decades in biosensing-related development due to outstanding optical properties. Peptides, as newly realized functional biomolecules, are promising candidates of replacing antibodies, receptors, and substrates for specific molecular interactions. Both peptides and AuNPs are robust and easily synthesized at relatively low cost. Hence, peptide-AuNP-based bio-nano-technological approaches have drawn increasing interest, especially in the field of molecular targeting, cell imaging, drug delivery, and therapy. Many excellent works in these areas have been reported: demonstrating novel ideas, exploring new targets, and facilitating advanced diagnostic and therapeutic technologies. Importantly, some of them also have been employed to address real practical problems, especially in remote and less privileged areas. This contribution focuses on the application of peptide-gold hybrid nanomaterials for various molecular interactions, especially in biosensing/diagnostics and cell targeting/imaging, as well as for the development of highly active antimicrobial/antifouling coating strategies. Rationally designed peptide-gold nanomaterials with functional properties are discussed along with future challenges and opportunities.

Towards Robust Delivery of Antimicrobial Peptides to Combat Bacterial Resistance

Antimicrobial peptides (AMPs), otherwise known as host defence peptides (HDPs), are naturally occurring biomolecules expressed by a large array of species across the phylogenetic kingdoms. They have great potential to combat microbial infections by directly killing or inhibiting bacterial activity and/or by modulating the immune response of the host. Due to their multimodal properties, broad spectrum activity, and minimal resistance generation, these peptides have emerged as a promising response to the rapidly concerning problem of multidrug resistance (MDR). However, their therapeutic efficacy is limited by a number of factors, including rapid degradation, systemic toxicity, and low bioavailability. As such, many strategies have been developed to mitigate these limitations, such as peptide modification and delivery vehicle conjugation/encapsulation. Oftentimes, however, particularly in the case of the latter, this can hinder the activity of the parent AMP. Here, we review current delivery strategies used for AMP formulation, focusing on methodologies utilized for targeted infection site release of AMPs. This specificity unites the improved biocompatibility of the delivery vehicle with the unhindered activity of the free AMP, providing a promising means to effectively translate AMP therapy into clinical practice.

Anti-bacterial activity of inorganic nanomaterials and their antimicrobial peptide conjugates against resistant and non-resistant pathogens

This review details the antimicrobial applications of inorganic nanomaterials of mostly metallic form, and the augmentation of activity by surface conjugation of peptide ligands. The review is subdivided into three main sections, of which the first describes the antimicrobial activity of inorganic nanomaterials against gram-positive, gram-negative and multidrug-resistant bacterial strains. The second section highlights the range of antimicrobial peptides and the drug resistance strategies employed by bacterial species to counter lethality. The final part discusses the role of antimicrobial peptide-decorated inorganic nanomaterials in the fight against bacterial strains that show resistance. General strategies for the preparation of antimicrobial peptides and their conjugation to nanomaterials are discussed, emphasizing the use of elemental and metallic oxide nanomaterials. Importantly, the permeation of antimicrobial peptides through the bacterial membrane is shown to aid the delivery of nanomaterials into bacterial cells. By judicious use of targeting ligands, the nanomaterial becomes able to differentiate between bacterial and mammalian cells and, thus, reduce side effects. Moreover, peptide conjugation to the surface of a nanomaterial will alter surface chemistry in ways that lead to reduction in toxicity and improvements in biocompatibility.

Modulation of protein-graphene oxide interactions with varying degrees of oxidation

The degree of oxidation of graphene oxide (GO) has been shown to be important for its toxicity and drug-loading efficiency. However, the effect of its variations on GO-protein interaction remains unclear. Here, we evaluate the effect of the different oxidation degrees of GO on its interaction with human ubiquitin (8.6 kDa) using solution state nuclear magnetic resonance (NMR) spectroscopy in combination with other biophysical techniques. Our findings show that the interaction between the protein and the different GO samples is weak and electrostatic in nature. It involves fast dynamic exchange of the protein molecules from the surface of the GO. As the oxidation degree of the GO increases, the extent of the interaction with the protein changes. The interaction of the protein with GO can thus be modulated by tuning the degree of oxidation. This study opens up new avenues to design appropriate graphenic materials for use in various biomedical fields such as drug delivery, biomedical devices and imaging.

Nanomaterials with active targeting as advanced antimicrobials

With a growing health threat of bacterial resistance to antibiotics, the nanomaterials have been extensively studied as an alternative. It is assumed that antimicrobial nanomaterials can affect bacteria by several mechanisms simultaneously and thereby overcome antibiotic resistance. Another promising potential use is employing nanomaterials as nanocarriers for antibiotics in order to overcome bacterial defense mechanisms. The passive targeting of nanomaterials is the often used strategy for bacterial treatment, including intracellular infections of macrophages. Furthermore, the specific targeting enhances the efficacy of antimicrobials and reduces side effects. This review aims to discuss advantages, disadvantages, and challenges of nanomaterials in the context of the targeting strategies for antimicrobials as advanced tools for treatments of bacterial infections. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Functional Nanomaterials for the Detection and Control of Bacterial Infections

Infections with multidrug-resistant bacteria that are difficult to treat with commonly used antibiotics have spread globally, raising serious public health concerns. Conventional bacterial detection techniques are time-consuming, which may delay treatment for critically ill patients past the optimal time. There is an urgent need for rapid and sensitive diagnosis and effective treatments for multidrug-resistant pathogenic bacterial infections. Advances in nanotechnology have made it possible to design and build nanomaterials with therapeutic and diagnostic capabilities. Functional nanomaterials that can specifically interact with bacteria offer additional options for the diagnosis and treatment of infections due to their unique physical and chemical properties. Here, we summarize the recent advances related to the preparation of nanomaterials and their applications for the detection and treatment of bacterial infection. We pay particular attention to the toxicity of therapeutic nanoparticles based on both in vitro and in vivo assays. In addition, the major challenges that require further research and future perspectives are briefly discussed.

Succinylated casein-coated peptide-mesoporous silica nanoparticles as an antibiotic against intestinal bacterial infection

Increasing drug resistance necessitates the discovery of novel bactericides. Human defensin (HD) peptides can eliminate resistant bacteria and are promising candidates for next-generation antibiotics. T7E21R-HD5 is a potent bactericide designed by site mutations at enteric HD5. To facilitate the development of T7E21R-HD5 into an intestinal antibiotic, we employed a mesoporous silica nanoparticle (MSN) as the peptide carrier. Despite its ineffectiveness at killing bacteria, the MSN intensified the outer membrane penetration and inner membrane permeabilization abilities of T7E21R-HD5 and thus enhanced its antibacterial action against multidrug resistant (MDR) E. coli, which broadened the role of MSNs in drug delivery. For the reduction in T7E21R-HD5 losses in the stomach, we further modified MSN@T7E21R-HD5 with succinylated casein (SCN), a milk protein that can be specifically degraded by intestinal protease. SCN coating decreased T7E21R-HD5 release from the MSNs, especially in a highly acidic environment. The controlled release of MSN@T7E21R-HD5 from SCN encapsulation was confirmed in the presence of trypsin. MSN@T7E21R-HD5@SCN was nontoxic to host cells, and it was capable of inactivating MDR E. coli in vivo and alleviating intestinal inflammation by suppressing the production of inflammatory factors TNF-α, IL-1β, and MMP-9. This study provides a peptide-based nanobiotic with efficacy to combat intestinal infection, especially against drug-resistant bacteria. The biocompatible and readily prepared MSN/SCN delivery system may benefit further intestinal antibiotic design and promote the drug transformation of additional enterogenic functional molecules.

Advances in Lipid and Metal Nanoparticles for Antimicrobial Peptide Delivery

Antimicrobial peptides (AMPs) have been described as excellent candidates to overcome antibiotic resistance. Frequently, AMPs exhibit a wide therapeutic window, with low cytotoxicity and broad-spectrum antimicrobial activity against a variety of pathogens. In addition, some AMPs are also able to modulate the immune response, decreasing potential harmful effects such as sepsis. Despite these benefits, only a few formulations have successfully reached clinics. A common flaw in the druggability of AMPs is their poor pharmacokinetics, common to several peptide drugs, as they may be degraded by a myriad of proteases inside the organism. The combination of AMPs with carrier nanoparticles to improve delivery may enhance their half-life, decreasing the dosage and thus, reducing production costs and eventual toxicity. Here, we present the most recent advances in lipid and metal nanodevices for AMP delivery, with a special focus on metal nanoparticles and liposome formulations.