Plasmonic Bi metal as cocatalyst and photocatalyst: The case of Bi/(BiO) 2 CO 3 and Bi particles

Robust Bi-anchoring carbon dot/BiOCl sheet heterojunction photocatalysts toward superior photocatalytic activity

BiOCl has attracted much attention due to its robust layered structure, excellent photocatalytic activity and nontoxicity. However, its practical application is hindered by its narrowband UV photoresponse and rapid recombination of photocarriers. Herein, zero-dimensional Bi-anchoring carbon quantum dot (Bi-CD)/two-dimensional BiOCl heterojunction (Bi-CD/BiOCl) photocatalysts are designed and synthesized by a facile hydrothermal method. Under 190-1100 nm broadband light irradiation, the optimized Bi-CD/BiOCl sample exhibits a superb rhodamine B (RhB) degradation rate of nearly 100%, which is 2.3 (1.7) times that of pristine BiOCl (CD/BiOCl). Additionally, the optimized sample exhibits an RhB degradation rate of up to 88.1% even under direct outdoor light and robust durability in water solution. Experimental results combined with DFT calculations reveal that the superior photocatalytic activity arises from the synergetic effects of broader light absorption due to the incorporation of CD, extra hot electron excitation by the localized surface plasmon resonance (LSPR) effect of metallic Bi, and enhanced electron transfer across the heterojunction interface as well as the existence of more oxygen vacancy traps in BiOCl. This work gives insights into the structure and photocatalytic properties of Bi-CD/BiOCl and provides a new strategy for the design and fabrication of robust high-performance photocatalysts under wide spectrum light irradiation.

In-situ construct CuInS2/Bi/Bi2MoO6 S-scheme/Schottky dual heterojunctions catalyst for enhanced photocatalytic degradation of diclofenac sodium

In this paper, the S-scheme/Schottky heterojunction photocatalyst (CuInS2/Bi/Bi2MoO6, CIS/Bi/BMO) was successfully constructed via a facile in-situ solvothermal method, aimed at enhancing its photocatalytic performance. The results of the study on the photocatalytic degradation of diclofenac sodium (DCF) under simulated solar light irradiation revealed that the as-prepared composite exhibited remarkable catalytic efficiency in comparison to the pristine Bi2MoO6 and CuInS2. The plasmonic bismuth (Bi) was formed during the solvothermal process. Subsequently, CuInS2 and Bi were grown on the surface of Bi2MoO6 leading to forming CIS/BMO S-scheme heterojunction, along with a Schottky junction between Bi and Bi2MoO6. The use of ethylene glycol as a support was the main reason for the significant improvement in photocatalytic efficiency in the degradation of DCF. Moreover, the probable photocatalytic mechanisms for the degradation of DCF had been proposed based on the active species quenching experiments. The eleven degradation products were detected by HPLC-MS, and the degradation reaction pathway of DCF was deduced. Additionally, the CIS/Bi/BMO photocatalyst exhibited a consistently high removal rate after four cycles. This study proposes a new strategy for designing efficient S-scheme/Schottky heterojunction photocatalysts for solar energy conversion.

Efficient photocatalytic degradation of perfluorooctanoic acid by bismuth nanoparticle modified titanium dioxide

Perfluorooctanoic acid (PFOA) is potentially toxic and exceptionally stable attributed to its robust CF bond, which is hard to be removed by UV/TiO2 systems. In this research, bismuth nanoparticle (Bi NP) modified titanium oxides (Bi/TiO2) were synthesized by a simple photochemical deposition-calcination method and were applied as photocatalysts for the first time to degrade PFOA. The removal rate of 50 mg/L PFOA reached 99.3 % with 58.6 % defluorination rate after 30 min of irradiation via a mercury lamp. Bi/TiO2 exhibited superior performance in PFOA degradation compared to commercial photocatalysts (TiO2, Ga2O3, Bi2O3 and In2O3). In addition, Bi/TiO2 showed high degradation activity under actual sunlight, achieved 100 % removal rate and 59.3 % defluorination rate within 2 h. Bi NPs increase the light trapping ability of Bi/TiO2 and promote the separation of photogenerated electron-hole pairs via local surface plasmon resonance (LSPR) effect, which results in more photogenerated holes (h+) and hydroxyl radicals (OH). Combined with DFT calculations and intermediate detections, the degradation reaction is initiated from the oxidation of the PFOA carboxyl group via h+, followed by the loss of the CF2 unit step by step with the participation of OH. This work presents a novel approach for the practical implementation of TiO2-based photocatalysts to achieve highly efficient photocatalytic degradation of perfluorocarboxylic acids (PFCAs).

Bi-Doped and Bi Nanoparticles Loaded CeO2 Derived from Ce-MOF for Photocatalytic Degradation of Formaldehyde Gas and Tetracycline Hydrochloride

Bi/CeO2 (BC-x) photocatalysts are successfully prepared by solvothermal loading Bi nanoparticles and Bi-doped CeO2 derived by Ce-MOF (Ce-BTC). Formaldehyde gas (HCHO) and tetracycline hydrochloride (HTC) are used to evaluate the photocatalytic activity of the synthesized Bi/CeO2. For BC-1000 photocatalyst, the degradation of HTC by 420 nm < λ < 780 nm light reaches 91.89% for 90 min, and HCHO by 350 nm < λ < 780 nm light reaches 94.66% for 120 min. The photocatalytic cycle experiments prove that BC-1000 has good cyclic stability and repeatability. The results of photoluminescence spectra, fluorescence lifetime, photocurrent response, and electrochemical impedance spectroscopy showed that the SPR (Surface Plasmon Resonance) effect of Bi nanoparticles acted as a bridge and promoted electron transfer and enhanced the response-ability of Bi/CeO2 to visible light. Bi-doping produced more oxygen vacancies to provide adsorption sites for adsorbing oxygen and generated more ·O2 - thus promoting photocatalytic reactions. The mechanism of photocatalytic degradation is analyzed in detail utilizing active free radical capture experiments and electron paramagnetic resonance (EPR) characterization. The experimental results indicate that ·O2 - and h+ active free radicals significantly promote the degradation of pollutants.

Ultra-sensitive photoelectrochemical biosensor for determination of African swine fever virus based on surface plasmon resonance

Sensitive and specific detection of African swine fever virus (ASFV) is crucial for agricultural production and economic development due to the mortality and infectivity. In this study, a bismuth induced enhanced photoelectrochemical (PEC) biosensor based on in-situ loop mediated isothermal amplification (LAMP) was constructed using deposited bismuth nanoparticles loaded bismuth oxycarbonate (Bi/(BiO)2CO3) as photoactive material, using primers designed according to LAMP as recognition elements, and using in-situ LAMP to achieve nucleic acid amplification of target genes. As the Bi induced surface plasmon resonance (SPR) effect, enhanced light captures and effective electron hole separation, it could effectively enhance the photoelectric activity, so the prepared Bi/(BiO)2CO3 nanohybrid had higher photocurrent intensity and good stability. The constructed PEC biosensor has realized the detection of ASFV in real samples with good sensitivity, specificity and repeatability. In the range from 1.0 × 10-13 to 1.0 × 10-7 g/L, the photoelectric current decreased with the increase of the concentration of ASFV, and the detection limit was 3.0 × 10-14 g/L (about 0.048 copies/μL). Combining the advantages of LAMP with the excellent performance of PEC, it provides a simple, economical and efficient method for nucleic acid diagnosis, and also provides a new idea for biosensor detection.

Wet-chemical intercalation of Bi4TaO8Br with self-adaptive structural deformation for enhanced photocatalytic performance

A small specific surface area and severe charge carrier recombination greatly limit the photocatalytic efficiency of semiconductors. Herein, we developed a novel wet-chemical intercalation strategy by using the NaBH4 reagent for in situ intercalation-assisted expansion and surface/interface reconstruction of Bi4TaO8Br, which exhibits an enhanced specific surface area and charge carrier separation features. This work highlights intercalation of semiconductors for achieving enhanced photocatalytic performance and provides a new idea to synergistically regulate the morphology and surface/interface composition of semiconductors.

Leveraging Ligand and Composition Effects: Morphology-Tailorable Pt-Bi Bimetallic Aerogels for Enhanced (Photo-)Electrocatalysis

Metal aerogels (MAs) are emerging porous materials displaying unprecedented potential in catalysis, sensing, plasmonic technologies, etc. However, the lack of efficient regulation of their nano-building blocks (NBBs) remains a big hurdle that hampers the in-depth investigation and performance enhancement. Here, by harmonizing composition and ligand effects, Pt- and Bi-based single- and bimetallic aerogels bearing NBBs of controlled dimensions and shapes are obtained by facilely tuning the metal precursors and the applied ligands. Particularly, by further modulating the electronic and optic properties of the aerogels via adjusting the content of the catalytically active Pt component and the semiconducting Bi component, both the electrocatalytic and photoelectrocatalytic performance of the Pt-Bi aerogels can be manipulated. In this light, an impressive catalytic performance for electro-oxidation of methanol is acquired, marking a mass activity of 6.4-fold higher under UV irradiation than that for commercial Pt/C. This study not only sheds light on in situ manipulating NBBs of MAs, but also puts forward guidelines for crafting high-performance MAs-based electrocatalysts and photoelectrocatalysts toward energy-related electrochemical processes.

Reactive sputtering onto an ionic liquid, a new synthesis route for bismuth-based nanoparticles

Metallic bismuth and Bi-oxyfluoride nanoparticles (NPs) are successfully synthesized by non-reactive and reactive sputtering of a Bi target onto 1-butyl-3-methylimidazolium bis(trifluoro-methylsulfonyl)imide ([BMIM][TFSI]) ionic liquid (IL). Non-reactive sputtering is realized in pure Ar plasma, where isotropic, well crystallized and dispersed Bi NPs of 3-7 nm are obtained. The diameter and the size distribution of these NPs do not significantly vary with the power, gas pressure, and sputtering time; but these sputtering parameters seem to influence the NP concentration. Then, the introduction of O₂ and CF₄ gases in addition to Ar enables the reaction of radicals from plasma with Bi clusters at the liquid's top surface to form Bi-oxyfluoride NPs of 3-12 nm in diameter with photocatalytic activity. Hence, the reactive sputtering onto an IL is an efficient, original and promising method for synthesizing Bi-based compound NPs. Finally, we propose a mechanism based on reactions of species from plasma at the IL surface to explain the formation of Bi-compounds by reactive sputtering.

Cost-effective Bi2WO6 for efficient degradation of rhodamine B and tetracycline

The morphology-controlled synthesis of nanostructured photocatalysts by an environmentally friendly and low-cost method provides a feasible way to realize practical applications of photocatalysts. Herein, Bi2WO6 (BWO) nanophotocatalysts with mulberry shape, sheet-like, and round-cake morphologies have been successfully synthesized through a highly facile solvothermal process by simply adjusting the solvothermal temperature or utilizing selective addition of ethylene glycol as an orientation agent without using strong acids and bases and/or hazardous chemicals. The ratio of ethylene glycol and glacial acetic acid can affect the morphology and oxygen vacancy content of BWO, thereby influencing the photocatalytic performance. The photocatalytic activity of the as-prepared samples was evaluated by degradation of rhodamine B (RhB) and tetracycline under visible-light irradiation. The results indicated that all the BWO samples exhibited morphology-associated photocatalytic activity, and the sheet-like structure of BWO obtained via solvothermal treatment at 120 °C with ethylene glycol and glacial acetic acid ratio of 1:3 achieved the maximum specific surface area and possessed abundant oxygen vacancies, exhibiting outstanding photocatalytic activity for degradation of RhB and tetracycline. The degradation rate of RhB reached 100% within 20 min. To the best of our knowledge, this value is one of the most remarkable values for pristine BWO photocatalysts. Radical capture experiments demonstrated that hydroxyl radicals (·OH) play major roles compared with electrons (e-) and holes (h+) in the photocatalytic degradation process. A possible mechanism for the photocatalytic degradation of pollutants was proposed to better understand the reaction process. We believe that the more economical, efficient and greener methodology can provide guidance to develop highly efficient photocatalysts with favourable morphology and structure.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10854-022-09654-z.

High-Throughput Strategies for the Design, Discovery, and Analysis of Bismuth-Based Photocatalysts

Bismuth-based nanostructures (BBNs) have attracted extensive research attention due to their tremendous development in the fields of photocatalysis and electro-catalysis. BBNs are considered potential photocatalysts because of their easily tuned electronic properties by changing their chemical composition, surface morphology, crystal structure, and band energies. However, their photocatalytic performance is not satisfactory yet, which limits their use in practical applications. To date, the charge carrier behavior of surface-engineered bismuth-based nanostructured photocatalysts has been under study to harness abundant solar energy for pollutant degradation and water splitting. Therefore, in this review, photocatalytic concepts and surface engineering for improving charge transport and the separation of available photocatalysts are first introduced. Afterward, the different strategies mainly implemented for the improvement of the photocatalytic activity are considered, including different synthetic approaches, the engineering of nanostructures, the influence of phase structure, and the active species produced from heterojunctions. Photocatalytic enhancement via the surface plasmon resonance effect is also examined and the photocatalytic performance of the bismuth-based photocatalytic mechanism is elucidated and discussed in detail, considering the different semiconductor junctions. Based on recent reports, current challenges and future directions for designing and developing bismuth-based nanostructured photocatalysts for enhanced photoactivity and stability are summarized.

Carbon Dots Mediated In Situ Confined Growth of Bi Clusters on g-C3 N4 Nanomeshes for Boosting Plasma-Assisted Photoreduction of CO2

Synthesis of high-efficiency, cost-effective, and stable photocatalysts has long been a priority for sustainable photocatalytic CO₂ reduction reactions (CRR), given its importance in achieving carbon neutrality goals under the new development philosophy. Fundamentally, the sluggish interface charge transportation and poor selectivity of products remain a challenge in the CRR progress. Herein, this work unveils a synergistic effect between high-density monodispersed Bi/carbon dots (CDs) and ultrathin graphite phase carbon nitride (g-C₃ N₄ ) nanomeshes for plasma-assisted photocatalytic CRR. The optimal g-C₃ N₄ /Bi/CDs heterojunction displays a high selectivity of 98% for CO production with a yield up to 22.7 µmol g^-1 without any sacrificial agent. The in situ confined growth of plasmonic Bi clusters favors the production of more hot carriers and improves the conductivity of g-C₃ N₄ . Meanwhile, a built-in electric field driving force modulates the directional injection photogenerated holes from plasmonic Bi clusters and g-C₃ N₄ photosensitive units to adjacent CDs reservoirs, thus promoting the rapid separation and oriented transfer in the CRR process. This work sheds light on the mechanism of plasma-assisted photocatalytic CRR and provides a pathway for designing highly efficient plasma-involved photocatalysts.

Fabrication of Bi-Bi3O4Cl plasmon photocatalysts for removal of aqueous emerging contaminants under visible light

Photocatalytic oxidation of emerging contaminants (ECs) in water has recently gained extensive attentions. In this study, bismuth oxychloride-based plasmon photocatalysts (Bi-Bi₃O₄Cl) exhibiting high performance were successfully developed by reducing Bi³⁺ on the surface of Bi₃O₄Cl. Consequently, the photocatalysts were used to remove ECs from water. The effects of developmental process and Bi metal plasmon resonance on the photoelectric performances of Bi-Bi₃O₄Cl were investigated through a series of characterizations. The UV-vis diffuse reflection and photoluminescence spectra revealed that the light absorption range of the photocatalyst gradually increased and the electron recombination rate gradually decreased with the introduction of Bi metals. The optimal removal rates of ciprofloxacin and tetrabromobisphenol A by Bi-Bi₃O₄Cl were 93.8% and 96.4%; the respective reaction rate constants were 5.48 and 4.93 times higher than that of Bi₃O₄Cl. The mechanism study indicated that main reactants in the photocatalytic system were •O₂^- radicals and photogenerated holes, and the existence of oxygen vacancies and Bi metals promoted electron transfer in photocatalyst. In conclusion, this research produces a novel, green, highly efficient, and stable visible light photocatalyst for the removal of ECs from water.

Photocatalytic degradation of GenX in water using a new adsorptive photocatalyst

GenX, the ammonium salt of hexafluoropropylene oxide dimer acid, has been used as a replacement for perfluorooctanoic acid. Due to its widespread uses, GenX has been detected in waters around the world amid growing concerns about its persistence and adverse health effects. As relevant regulations are rapidly evolving, new technologies are needed to cost-effectively remove and degrade GenX. In this study, we developed an adsorptive photocatalyst by depositing a small amount (3 wt.%) of bismuth (Bi) onto activated-carbon supported titanate nanotubes, Bi/TNTs@AC, and tested the material for adsorption and subsequent solid-phase photodegradation of GenX. Bi/TNTs@AC at 1 g/L was able to adsorb GenX (100 µg/L, pH 7.0) within 1 h, and then degrade 70.0% and mineralize 42.7% of pre-sorbed GenX under UV (254 nm) in 4 h. The efficient degradation also regenerated the material, allowing for repeated uses without chemical regeneration. Material characterizations revealed that the active components of Bi/TNTs@AC included activated carbon, anatase, and Bi nanoparticles with a metallic Bi core and an amorphous Bi₂O₃ shell. Electron paramagnetic resonance spin-trapping, UV-vis diffuse reflectance spectrometry, and photoluminescence analyses indicated the superior photoactivity of Bi/TNTs@AC was attributed to enhanced light harvesting and generation of charge carriers due to the UV-induced surface plasmon resonance effect, which was enabled by the metallic Bi nanoparticles. ^•OH radicals and photogenerated holes (h⁺) were responsible for degradation of GenX. Based on the analysis of degradation byproducts and density functional theory calculations, photocatalytic degradation of GenX started with cleavage of the carboxyl group and/or ether group by ^•OH, h⁺, and/or e_aq^-, and the resulting intermediates were transformed into shorter-chain fluorochemicals following the stepwise defluorination mechanism. Bi/TNTs@AC holds the potential for more cost-effective degradation of GenX and other per- and polyfluorinated alkyl substances.

Non-Noble Plasmonic Metal-Based Photocatalysts

Solar-to-chemical energy conversion via heterogeneous photocatalysis is one of the sustainable approaches to tackle the growing environmental and energy challenges. Among various promising photocatalytic materials, plasmonic-driven photocatalysts feature prominent solar-driven surface plasmon resonance (SPR). Non-noble plasmonic metals (NNPMs)-based photocatalysts have been identified as a unique alternative to noble metal-based ones due to their advantages like earth-abundance, cost-effectiveness, and large-scale application capability. This review comprehensively summarizes the most recent advances in the synthesis, characterization, and properties of NNPMs-based photocatalysts. After introducing the fundamental principles of SPR, the attributes and functionalities of NNPMs in governing surface/interfacial photocatalytic processes are presented. Next, the utilization of NNPMs-based photocatalytic materials for the removal of pollutants, water splitting, CO₂ reduction, and organic transformations is discussed. The review concludes with current challenges and perspectives in advancing the NNPMs-based photocatalysts, which are timely and important to plasmon-based photocatalysis, a truly interdisciplinary field across materials science, chemistry, and physics.

Rose petals-like Bi semimetal embedded on the zeolitic imidazolate frameworks based-immunochromatographic strip to sensitively detect acetamiprid

Ultrasensitive and facile detection of Acetamiprid (ACE) is of exceptional significance to assess the environmental and biological pollution. In this study, an advanced Bi semimetal/Zeolitic imidazolate frameworks hybrid material-based immunochromatographic strip (Bi/ZIF HM-ICS) sensor was developed for the sensitive detection of ACE. The novel Bi/ZIF HM was prepared through one-pot hydrothermal reduction of Bi nanoparticles on ZIF, which was selected as a signal tag taking advantages of its excellent color intensity, strong affinity with monoclonal antibodies (mAbs), and favorable biocompatibility. Bi/ZIF HM could not only improve the utilization efficiency of mAbs but also boost the sensing performance. Under optimal conditions, the limit of detection (LOD) of the Bi/ZIF HM-ICS was 4.68 pg/mL with the linear range from 0.01 ng/mL to 6 ng/mL, which was 98-fold lower than that of traditional gold nanoparticles-based ICS (0.457 ng/mL), and the recoveries of the Bi/ZIF HM-ICS ranged from 80.27% to 118.52% with the relative standard deviation (RSD) below 3.67% in pear, apple, tomato, and cucumber. Overall, the practical application of the Bi/ZIF HM-ICS in complicated samples was realized for detecting pesticide residue, and expanding its application scope in monitoring environment.

Optimized strategies for (BiO)2CO3 and its application in the environment

Photocatalysis is a new type of technology, which has been developed rapidly for solving environmental problems such as wastewater or air pollutants in recent years. Also, the effective performance and non-secondary pollution of photocatalytic technology attract much attention from researchers. As a "sillén" phase oxide, the (BiO)₂CO₃ (BOC) is a great potential photocatalyst attributing to composed of alternate Bi₂O₂²⁺ and CO₃^2- layers, which is a benefit for transportation of electrons. Besides, BOC has attracted much attention from researchers because of its excellent characters of non-toxic, environmentally friendly, and low-cost. However, BOC has a defect on wide band gap, which is limited for the usage of visible light, so a great number of published papers focus on the modifications of BOC to improve its photocatalytic efficiency. This article mainly summarizes the modifications of BOC and its application in the environment, guiding for designing BOC-based materials with high photocatalytic activity driven by light. Moreover, the research trend and prospect of BOC photocatalyst were briefly summarized, which could lay the foundation for forming a green and efficient BOC-based photocatalytic reaction system. Importantly, this review might provide a theoretical basis and guidance for further research in this field.

Highly Selective Production of Ethanol Over Hierarchical Bi@Bi2 MoO6 Composite via Bicarbonate-Assisted Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is a sustainable and inexpensive method to solve the energy crisis and the greenhouse effect. However, the major stumbling blocks such as poor product selectivity, low yield of the multi-carbon products, and serious recombination of electron-hole pairs hinder practical application of photocatalysts. Herein, a high-performance Bi@Bi₂ MoO₆ photocatalyst, Bi nanoparticles grown on the surface of Bi₂ MoO₆ nanosheets with oxygen vacancies, was fabricated via a simple solvothermal approach. Benefiting from the abundant active sites and effective separation of photogenerated carriers of Bi₂ MoO₆ nanosheets, and the localized surface plasmon resonance effect of Bi nanoparticles, the Bi@Bi₂ MoO₆ sample exhibited great photocatalytic CO₂ reduction activity. Furthermore, adding NaHCO₃ into the system not only significantly increased the C₂ H₅ OH generation rate but also enhanced the product selectivity. In the photocatalytic measurement (0.17 mol L^-1 CO₂ -saturated NaHCO₃ solution), the highest formation rates of CO, CH₃ OH, and C₂ H₅ OH were reached at 0.85, 0.59, and 17.93 μmol g^-1  h^-1 (≈92 % selectivity), respectively.

Insights into the Mechanism of the Bi/BiVO4 Composites for Improved Photocatalytic Activity

The increasing concentration of residual ciprofloxacin (CIP) can cause potential harm to the environment. Photocatalysis has been regarded as an effective method for the degradation of CIP. Bi/BiVO4 with excellent photocatalytic performance was synthesized partial reduction with NaBH4. The structure, morphology, composition, and optical performance of BiVO4 and Bi/BiVO4 were characterized by a variety of techniques. The results showed that the Bi/BiVO4 exhibits high photocatalytic activity in the degradation of CIP. Comparison of BiVO4 and Bi/BiVO4 has lower photoluminescence intensity and higher photocurrent responses intensity. The introduction of Bi made Bi/BiVO4 have a higher charge separation efficiency and generate more active free radicals. In addition, the radical trapping experiments revealed that superoxide free radicals and holes were the main active free radicals during the degradation of CIP. The pathway of CIP degradation was investigated through high performance liquid chromatography-mass spectrometry, and a possible degradation mechanism was proposed.

Broad-spectrum response NCQDs/Bi2O2CO3 heterojunction nanosheets for ciprofloxacin photodegradation: Unraveling the unique roles of NCQDs upon different light irradiation

N-doped carbon quantum dots (NCQDs) decorated Bi₂O₂CO₃ heterojunction nanosheets have been successfully constructed by a facile hydrothermal method. The obtained NCQDs/Bi₂O₂CO₃ heterojunction exhibits a wide-spectrum absorption ability and remarkably enhanced photocatalytic activities for ciprofloxacin photodegradation from ultraviolet to near-infrared region. The critical roles of NCQDs and two different charge separation and transfer processes of NCQDs/Bi₂O₂CO₃ heterojunction under different light irradiations have been elucidated. Upon UV light irradiation, NCQDs act as electron reservoirs and a Z-scheme charge transfer process between Bi₂O₂CO₃ and NCQDs promotes electrons transfer and •O₂^- reactive species generation. Under visible and NIR light irradiation, NCQDs act as photosensitizer (hole reservoirs) to harvest solar light and a type-II heterojunction leads to an efficient charge carrier separation and thus high catalytic ability. The mechanisms and pathways of ciprofloxacin degradation driven by different lights are discussed accordingly. This work provides a versatile pathway to well design an efficient wide-spectrum response photocatalyst.

Room-temperature synthesized In-BiOBr1-xIx nanosheets with visible-light-driven superior photocatalytic activity: Degradation of dye/non-dye organic pollutants for environmental remediation

Photocatalysis is extensively investigated as a green, efficient and promising technique for environmental remediation. In this study, a series of template free In-doped BiOBr_xI_1-x photocatalysts have been successfully prepared at room temperature and characterized by various methods. Complete degradation of negatively charged methyl Orange, positively charged Rhodamine B and Methylene Blue organic dyes, and neutral and colorless non-dye organic compound of furfural was attained. The flat band potential offered the possibility of reduction of dissolved O₂ to O₂^.- in the conduction band while the trapping experiment identified the (O₂^.-)is the main radical species followed by h⁺ for the photodegradation. In-BiOBrI-0.4 had an excellent photocatalytic degradation activity which could be due to the synergetic effect between metal ion doping and solid solution formation. It further promotes visible light-harvesting ability and photoinduced charge carrier separation efficiency. The order of the reaction rate was determined and the mechanism was proposed. This work can lay a base for the design of effective photocatalyst toward environmental remediation.

Flexible Carbon-Fiber/Semimetal Bi Nanosheet Arrays as Separable and Recyclable Plasmonic Photocatalysts and Photoelectrocatalysts

In this work, we prepared flexible carbon-fiber/semimetal Bi nanosheet arrays from solvothermal-synthesized carbon-fiber/Bi₂O₂CO₃ nanosheet arrays via a reductive calcination process. The flexible carbon-fiber/semimetal Bi nanosheet arrays can function as photocatalysts and photoelectrocatalysts for 2,4-dinitorphenol oxidation. Compared with carbon-fiber/Bi₂O₂CO₃ nanosheet arrays, the newly designed flexible carbon-fiber/semimetal Bi nanosheet arrays show enhanced ultraviolet-visible (UV-vis) light absorption efficiency and photocurrent, photocatalytic, and photoelectrocatalytic activities. Photocatalytic analyses indicate that the surface plasmon resonance (SPR) of semimetal Bi occurs under solar-simulated light irradiation during the photocatalytic process. The carbon-fiber traps the hot electrons exerted from the SPR of semimetal Bi and creates holes in the semimetal Bi nanosheets, which boosts the photocatalytic activity of the carbon fiber through plasmonic sensitization. Both photocatalytic experiments and density functional theory (DFT) calculations indicate that the electrons transferred to the carbon fiber and the holes created in semimetal Bi contribute to the formation of •O₂^- and •OH, respectively. The synergistic effect between electrocatalysis and photocatalysis under the solar-simulated light results in almost complete degradation of 2,4-dinitorphenol during the photoelectrocatalytic process. This work realizes a non-noble-metal plasmonic catalyst and provides a new avenue for the commercialization of photocatalysis and photoelectrocatalysis using the separable and recyclable carbon-fiber/semimetal Bi nanosheet arrays in the environment-related field.

Spatiotemporally Synchronous Oxygen Self-Supply and Reactive Oxygen Species Production on Z-Scheme Heterostructures for Hypoxic Tumor Therapy

Photodynamic therapy (PDT) efficacy has been severely limited by oxygen (O₂ ) deficiency in tumors and the electron-hole separation inefficiency in photosensitizers, especially the long-range diffusion of O₂ toward photosensitizers during the PDT process. Herein, novel bismuth sulfide (Bi₂ S₃ )@bismuth (Bi) Z-scheme heterostructured nanorods (NRs) are designed to realize the spatiotemporally synchronous O₂ self-supply and production of reactive oxygen species for hypoxic tumor therapy. Both narrow-bandgap Bi₂ S₃ and Bi components can be excited by a near-infrared laser to generate abundant electrons and holes. The Z-scheme heterostructure endows Bi₂ S₃ @Bi NRs with an efficient electron-hole separation ability and potent redox potentials, where the hole on the valence band of Bi₂ S₃ can react with water to supply O₂ for the electron on the conduction band of Bi to produce reactive oxygen species. The Bi₂ S₃ @Bi NRs overcome the major obstacles of conventional photosensitizers during the PDT process and exhibit a promising phototherapeutic effect, supplying a new strategy for hypoxic tumor elimination.

UV-light-assisted green preparation of Bi/BiOBr/RGO composites with oxygen vacancies toward enhanced photocatalytic removal of organic dye

Concomitant formation of metallic Bi nanoparticles and oxygen vacancies was successfully achieved within Bi/BiOBr/RGO composites by green UV-light exposure.

Formamide-assisted one-step synthesis of BiOCOOH and Bi/BiOCOOH micro-/nanostructures with tunable morphologies and composition and their photocatalytic activities

A series of BiOCOOH and Bi/BiOCOOH heterojunction photocatalysts have been facilely synthesized by a one-step reaction with the assistance of formamide.

Facet-dependent photocatalytic NO conversion pathways predetermined by adsorption activation patterns

Photocatalysts with different exposed facets generally exhibit different physicochemical properties, but the underlying mechanism has not been revealed. In this study, we synthesized nanoflake-assembled flower-like Bi2O2CO3 and homodisperse nanoflakes Bi2O2CO3 with exposed {110} and {001} facets (110-BOC and 001-BOC), respectively, to probe the activation and reaction mechanism of facet-dependent reactants. The results showed that Bi2O2CO3 with exposed {001} facets exhibited superior photocatalytic activity for photocatalytic abatement of NO in the air in comparison with 110-BOC. According to the combined results of ESR spectra and DFT calculation, the superior photocatalytic activity of 001-BOC stemmed from its enhanced capability to activate the reactants (O2 and H2O), which facilitated the formation of reactive radicals to participate in the photocatalytic NO oxidation. Most significantly, the time-dependent in situ DRIFTS spectra and DFT simulation results reveal that the adsorption activation of pollutants and desorption mechanisms of products were different for 110-BOC and 001-BOC in photocatalytic NO oxidation. Due to the differences in the atomic arrangement on the {110} and {001} facets, 001-BOC enabled the transformation of NO into NO- or cis-N2O22- during adsorption activation, while 110-BOC induces the adsorption activation of NO into NO+ or N2O3. The {001} facet of Bi2O2CO3 could promote the oxidation of intermediates to final products (NO3-) and enhance NO3- desorption. These different adsorption activation patterns on {110} and {001} facets essentially predetermined the facet-dependent conversion pathways of photocatalytic NO oxidation on different facets. The findings of this work would have critical implications for the understanding of the facet-dependent reaction mechanism and the design of novel efficient catalysts.

Nanobismuth: Fabrication, Optical, and Plasmonic Properties—Emerging Applications

Along the twentieth century, the electronic properties of bismuth have been widely studied, especially in relation with its magnetoresistive and thermoelectric responses. In this context, a particular emphasis has been made on electronic confinement effects in bismuth nanostructures (or nanobismuth). In the recent years, the optical properties of bismuth nanostructures are focusing a growing interest. An increasing number of reports point at the potential of such nanostructures to support plentiful optical resonances over an ultrabroad spectral range: “interband plasmonic” resonances in the ultraviolet, visible, and near-infrared; dielectric Mie resonances in mid- and far-infrared; and conventional free-carrier plasmonic resonances in the far-infrared and terahertz. With the aim to provide a comprehensive basis for exploiting the full optical potential of bismuth nanostructures, we review the current progress in their controlled fabrication, the trends reported (from theoretical calculations and experimental observations) for their optical and plasmonic response, and their emerging applications, including photocatalysis and switchable metamaterials.

3D Aerogel of Graphitic Carbon Nitride Modified with Perylene Imide and Graphene Oxide for Highly Efficient Nitric Oxide Removal under Visible Light

3D materials are considered promising for photocatalytic applications in air purification because of their large surface areas, controllability, and recyclability. Here, a series of aerogels consisting of graphitic-carbon nitride (g-C₃ N₄ ) modified with a perylene imide (PI) and graphene oxide (GO) are prepared for nitric oxide (NO) removal under visible-light irradiation. All of the photocatalysts exhibit excellent activity in NO removal because of the strong light absorption and good planarity of PI-g-C₃ N₄ coupled with the favorable charge transport properties of GO, which slow the recombination of electron-hole pairs. The aerogel containing thiophene displays the most efficient NO removal of the aerogel series, with a removal ratio of up to 66%. Density functional theory calculations are conducted to explain this result and recycling experiments are carried out to verify the stability and recyclability of these photocatalysts.

Superior NOx photocatalytic removal over hybrid hierarchical Bi/BiOI with high non-NO2 selectivity: synergistic effect of oxygen vacancies and bismuth nanoparticles

Oxygen vacancies and bismuth nanoparticles over Bi/BiOI simultaneously contribute to the deep oxidation of NO_x and remarkable non-NO₂ selectivity.