Evidence of coexisting microemulsion droplets in oil-in-water emulsions revealed by 2D DOSY 1H NMR

Regulation of Microlocalization of Antioxidants by Surfactant Micelles in Oil-in-Water Emulsions

The mass transport effect of aqueous micelles on antioxidants and oxidation products in emulsions may alter the rate, degree, and pathway of lipid oxidation. In this study, the dynamic mass transport of oxidation products and endogenous tocopherol during storage at different micelle concentrations was monitored by UV-vis spectrophotometry and high-performance liquid chromatography. Furthermore, the microlocalization of tocopherol in micelles was investigated using 1H nuclear magnetic resonance and nuclear Overhauser effect spectroscopy, fluorescence measurements, and molecular dynamics simulation. It was demonstrated that high-concentration micelles enhanced the emulsion stability by promoting the mass transport of hydroperoxides and endogenous antioxidants. The enhancement of micelles was a superposition effect of concentration, interaction sites, and binding force between tocopherols and Tween 20 molecules. Tween 20 concentration-induced favorable changes of microlocalization of tocopherol and dynamic mass transport demonstrated a new integrated perspective to control lipid oxidation.

The role of micro-structures in the aqueous phase of emulsion in lipid oxidation process

The instability of emulsions depended on participation of many physical structures in the emulsion. The walnut oil emulsion stabilized by sunflower phospholipid was used to study the potential relationship between the micro-structures in aqueous phase and the overall physicochemical stability of the emulsion. The vesicles and micro- structures (<70 nm, containing trace amounts of triglycerides) was observed by Cryo-TEM in the aqueous phase of emulsions. The content of triglycerides decreased gradually with the instability of the emulsion. The increase of phospholipid concentration inhibited the formation of lipid hydroperoxides (LOOH). However, the degradation of LOOH occurred preferentially in the aqueous micro- structures of high concentrations of phospholipids emulsions. These micro- structures did not affect the distribution of LOOH in the initial emulsion, but affected the distribution of malondialdehyde (MDA). This study provided insights into understanding the oxidative stability of emulsions - highlighting the role of micro- structures in the aqueous phase.

Intact NMR Approach Quickly Reveals Synchronized Microstructural Changes in Oil-in-Water Nanoemulsion Formulations

A soft-core oil-in-water (o/w) nanoemulsion (NE) is composed of nanometer (nm) sized oil droplets, stabilized by a surfactant layer and dispersed in a continuous bulky water phase. Characterization of the o/w NE molecule arrangements non-invasively, particularly the drug phase distribution (DPD) and its correlation to oil globule size (OGS), remains a challenge. Here we demonstrated the analytical methods of intact 19F Nuclear Magnetic Resonance (NMR) and 1H diffusion ordered spectroscopy (DOSY) NMR for their specificity in measuring DPD and OGS, respectively, on three NE formulations containing the active ingredient difluprednate (DFPN) at the same concentration. The results illustrated synchronized molecular rearrangement reflected in the DPD and OGS upon alterations in formulation. Addition of surfactant resulted in a higher DPD in the surfactant layer, and concomitantly smaller OGS. Mechanic perturbation converted most of the NE globules to the smaller thermodynamically stable microemulsion (ME) globules, changing both DPD and OGS to ME phase. These microstructure changes were not observed using 1D 1H NMR; and dynamic light scattering (DLS) was only sensitive to OGS of ME globule in mechanically perturbed formulation. Collectively, the study illustrated the specificity and essential role of intact NMR methods in measuring the critical microstructure attributes of soft-core NE systems quickly, accurately, and non-invasively. Therefore, the selected NMR approach can be a unique diagnostic tool of molecular microstructure or Q3 property in o/w NE formulation development, and quality assurance after manufacture process or excipient component changes.

Advancements in Characterization Techniques for Microemulsions: From Molecular Insights to Macroscopic Phenomena

Microemulsions are thermodynamically stable, optically isotropic, transparent, or semi-transparent mixed solutions composed of two immiscible solvents stabilized by amphiphilic solutes. This comprehensive review explores state-of-the-art techniques for characterizing microemulsions, which are versatile solutions essential across various industries, such as pharmaceuticals, food, and petroleum. This article delves into spectroscopic methods, nuclear magnetic resonance, small-angle scattering, dynamic light scattering, conductometry, zeta potential analysis, cryo-electron microscopy, refractive index measurement, and differential scanning calorimetry, examining each technique's strengths, limitations, and potential applications. Emphasizing the necessity of a multi-technique approach for a thorough understanding, it underscores the importance of integrating diverse analytical methods to unravel microemulsion structures from molecular to macroscopic scales. This synthesis provides a roadmap for researchers and practitioners, fostering advancements in microemulsion science and its wide-ranging industrial applications.

Recent advances in understanding the interfacial activity of antioxidants in association colloids in bulk oil

The chemical stability of edible oils rich in polyunsaturated fatty acids (PUFAs) is a major challenge within the food and supplement industries, as lipid oxidation reduces oil quality and safety. Despite appearing homogeneous to the human eye, bulk oils are actually multiphase heterogeneous systems at the nanoscale level. Association colloids, such as reverse micelles, are spontaneously formed within bulk oils due to the self-assembly of amphiphilic molecules that are present, like phospholipids, free fatty acids, and/or surfactants. In bulk oil, lipid oxidation often occurs at the oil-water interface of these association colloids because this is where different reactants accumulate, such as PUFAs, hydroperoxides, transition metals, and antioxidants. Consequently, the efficiency of antioxidants in bulk oils is governed by their chemical reactivity, but also by their ability to be located close to the site of oxidation. This review describes the impact of minor constituents in bulk oils on the nature of the association colloids formed. And then the formation of mixed reverse micelles (LOOH, (co)surfactants, or antioxidations) during the peroxidation of bulk oils, as well as changes in their composition and structure over time are also discussed. The critical importance of selecting appropriate antioxidants and surfactants for the changes of interface and colloid, as well as the inhibition of lipid oxidation is emphasized. The knowledge presented in this review article may facilitate the design of bulk oil products with improved resistance to oxidation, thereby reducing food waste and improving food quality and safety.

Monitoring galactolipid digestion and simultaneous changes in lipid-bile salt micellar organization by real-time NMR spectroscopy

The use of Nuclear Magnetic Resonance spectroscopy for studying lipid digestion in vitro most often consists of quantifying lipolysis products after they have been extracted from the reaction medium using organic solvents. However, the current sensitivity level of NMR spectrometers makes possible to avoid the extraction step and continuously quantify the lipids directly in the reaction medium. We used real-time 1H NMR spectroscopy and guinea pig pancreatic lipase-related protein 2 (GPLRP2) as biocatalyst to monitor in situ the lipolysis of monogalactosyl diacylglycerol (MGDG) in the form of mixed micelles with the bile salt sodium taurodeoxycholate (NaTDC). Residual substrate and lipolysis products (monogalactosyl monoacylglycerol (MGMG); monogalactosylglycerol (MGG) and octanoic acid (OA) were simultaneously quantified throughout the reaction thanks to specific proton resonances. Lipolysis was complete with the release of all MGDG fatty acids. These results were confirmed by thin layer chromatography (TLC) and densitometry after lipid extraction at different reaction times. Using diffusion-ordered NMR spectroscopy (DOSY), we could also estimate the diffusion coefficients of all the reaction compounds and deduce the hydrodynamic radius of the lipid aggregates in which they were present. It was shown that MGDG-NaTDC mixed micelles with an initial hydrodynamic radius rH of 7.3 ± 0.5 nm were changed into smaller micelles of NaTDC-MGDG-MGMG of 2.3 ± 0.5 nm in the course of the lipolysis reaction, and finally into NaTDC-OA mixed micelles (rH of 2.9 ± 0.5 nm) and water soluble MGG. These results provide a better understanding of the digestion of galactolipids by PLRP2, a process that leads to the complete micellar solubilisation of their fatty acids and renders their intestinal absorption possible.

Tiny, yet impactful: Detection and oxidative stability of very small oil droplets in surfactant-stabilized emulsions

HYPOTHESIS

The shelf life of multiphase systems, e.g. oil-in-water (O/W) emulsions, is severely limited by physical and/or chemical instabilities, which degrade their texture, macroscopic appearance, sensory and (for edible systems) nutritional quality. One prominent chemical instability is lipid oxidation, which is notoriously complex. The complexity arises from the involvement of many physical structures present at several scales (1-10,000 nm), of which the smallest ones are often overlooked during characterization.

EXPERIMENTS

We used cryogenic transmission electron microscopy (cryo-TEM) to characterize the coexisting colloidal structures at the nanoscale (10-200 nm) in rapeseed oil-based model emulsions stabilized by different concentrations of a nonionic surfactant. We assessed whether the oxidative and physical instabilities of the smallest colloidal structures in such emulsions may be different from those of larger colloidal structures.

FINDINGS

By deploying cryo-TEM, we analyzed the size of very small oil droplets and of surfactant micelles, which are typically overlooked by dynamic light scattering when larger structures are concomitantly present. Their size and oil content were shown to be stable over incubation, but lipid oxidation products were overrepresented in these very small droplets. These insights highlight the importance of the fraction of "tiny droplets" for the oxidative stability of O/W emulsions.

Sophorolipid-based microemulsion delivery system: Multifaceted enhancement of physicochemical properties of xanthohumol

Xanthohumol (XN) has numerous compelling physiological activities, but the poor solubility and stability severely limit its utilization. Therefore, a microemulsion (ME) delivery system based on biosurfactant sophorolipids (SLs) was established and its improvement on physicochemical properties of XN was investigated. The results showed that the systems increased the solubility of XN by about 4000 times, and its half-life during storage was extended to over 150 days. Partial replacement of Tween 80 with SL did not greatly affect their ability to form O/W subregions (in the high aqueous phase), but further improved the solubilization efficiency, storage stability, and antioxidant properties of XN. In vitro models revealed the release profile of XN from the systems followed non-Fickian diffusion, and the ME structure markedly strengthened its digestive stability and bioaccessibility. These results indicated that SL-based ME systems had great potential as a green solubilization and delivery method for XN and other hydrophobic drugs.

Fast Dynamics of Difluprednate in Micelles or Swollen-Micelles Revealed by 19F Nuclear Magnetic Resonance Spin Relaxation Rates

Knowledge of molecular rotational dynamics is critical to interpret solution nuclear magnetic resonance (NMR) spectroscopy. The observation of sharp solute NMR signals in micelles contradicted the surfactant viscosity effects noted in the Stokes-Einstein-Debye (SED) equation. Herein, the ¹⁹F spin relaxation rates of difluprednate (DFPN) drug dissolved in polysorbate-80 (PS-80) micelles and castor oil swollen micelles (s-micelle) were measured and adequately fit using an isotropic diffusion model based spectral density function. Despite the high viscosity of PS-80 and castor oil, the fitting results revealed fast 4 and 12 ns dynamics of DFPN in both micelle globules. The observation of the fast ns motion in the viscous surfactant/oil micelle phase demonstrated motion decoupling between solute molecules inside micelles and the micelle itself in an aqueous solution. These observations support the role of intermolecular interaction in governing the rotational dynamics of small molecules, versus the viscosity of the solvent molecules as defined in the SED equation.

HRMAS-NMR and simulation study of the self-assembly of surfactants on carbon nanotubes

Polyethoxylated surfactants, such as those of the Tween and Pluronic series, are commonly used to disperse carbon nanotubes (CNTs) and other nanoparticles. However, the current understanding of the nature of interactions between these surfactants and CNTs is limited. The nature of the interactions between surfactants (Tween-80 [T80] and Pluronic F68 [PF68]) and CNTs was investigated using high-resolution magic angle spinning nuclear magnetic resonance (HRMAS-NMR) and coarse-grained molecular dynamics (MD) simulations. HRMAS-NMR revealed that T80 molecules interact with single-walled CNTs (SWCNTs) and multi-walled CNTs (MWCNTs) via the oleyl chain, whereas PF68 molecules interact with the surface of SWCNTs and MWCNTs via the polypropylene oxide residues. The polyethylene oxide chains were oriented towards the external aqueous environment. The HRMAS-NMR results were supported by MD simulations, and the latter provided further insights into the nature of the interactions.

Environmentally-Friendly Pesticidal Activities of Callicarpa and Karomia Essential Oils from Vietnam and Their Microemulsions

There is an ongoing interest to identify alternative pesticidal agents to avoid the chronic problems associated with synthetic pesticides. Essential oils have shown promise as botanical pest control agents. In the present study, the essential oils of four members of the Lamiaceae (Callicarpa candicans, C. erioclona, C. macrophylla, and Karomia fragrans; Vietnamese names: Nàng nàng, Tu châu lông mem, Tu châu lá to and Cà diện, respectively), obtained from wild populations in Vietnam, have been obtained by hydrodistillation and analyzed by gas chromatography-mass spectrometry. The essential oils were formulated into microemulsions and the essential oils and their microemulsions were screened for mosquito larvicidal activity against Aedes aegypti, Aedes albopictus, Culex quinquefasciatus, and for molluscicidal activity against Pomacea canaliculata. Atractylone and (E)-caryophyllene dominated the volatiles of C. candicans (CCEO) and C. erioclona (CEEO), while the major component in C. macrophylla (CMEO) and K. fragrans (KFEO) was (E)-caryophyllene. The essential oils and microemulsions of both C. candicans and C. erioclona exhibited excellent larvicidal activity against all three mosquito species (Ae. aegypti, Ae. albopictus, and Cx. quinquefasciatus) with LC₅₀ values <10 μg/mL. Additionally, the larvicidal activity of the microemulsions were significantly improved compared with their free essential oils, especially for C. candicans and C. erioclona. All four essential oils and their microemulsions showed excellent molluscicidal activity with LC₅₀ <10 μg/mL. In most cases, the essential oils and microemulsions showed greater pesticidal activity against target organisms than the non-target freshwater fish, Oreochromis niloticus. The in silico studies on physicochemical and ADMET properties of the major components in the studied essential oils were also investigated and most of the compounds possessed a favorable ADMET profile. Computational modeling studies of the studied compounds demonstrated a favorable binding interaction with the mosquito odorant-binding protein target and support atractylone, β-selinene, and caryophyllene oxide as potential inhibitors. Based on the observed pesticidal activities of the essential oils and their microemulsions, the Callicarpa species and K. fragrans should be considered for potential cultivation and further exploration as botanical pesticidal agents.

Updated insight into the characterization of nano-emulsions

INTRODUCTION

In most of the studies, nano-emulsion characterization is limited to their size distribution and zeta potential. In this review, we present an updated insight of the characterization methods of nano-emulsions, including new or unconventional experimental approaches to explore in depth the nano-emulsion properties.

AREA COVERED

We propose an overview of all the main techniques used to characterize nano-emulsions, including the most classical ones, up to in vitro, ex vivo and in vivo evaluation. Innovative approaches are then presented in the second part of the review that presents innovative, experimental techniques less known in the field of nano-emulsion such as the nanoparticle tracking analysis, small-angle X-ray scattering, Raman spectroscopy, and nuclear magnetic resonance. Finally, in the last part we discuss the use of lipophilic fluorescent probes and imaging techniques as an emerging tool to understand the nano-emulsion droplet stability, surface decoration, release mechanisms, and in vivo fate.

EXPERT OPINION

This review is mostly intended for a broad readership and provides key tools regarding the choice of the approach to characterize nano-emulsions. Innovative and uncommon methods will be precious to disclose the information potentially reachable behind a formulation of nano-emulsions, not always known in first intention and with conventional methods.

Stabilization of Carbon Nanotubes and Graphene by Tween-80: Mechanistic Insights from Spectroscopic and Simulation Studies

Polyoxyethylene sorbitan monooleate is commonly used to obtain stable dispersions of nanoparticles (NPs) such as carbon nanotubes (CNTs) and graphene. However, the mechanism underlying dispersion is poorly understood. The present study aimed at investigating the mechanism of stabilization of carbon NPs (CNPs), namely, single-walled CNTs (SWCNTs), multi-walled CNTs (MWCNTs), and graphene, by Tween-80 using attenuated total internal reflection-Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. Molecular dynamics (MD) simulations were performed to identify, at the atomic scale, the significant interactions that underlie the adsorption and the stabilizing effect of Tween-80 on CNPs, in this way corroborating the spectroscopy results. Spectroscopic analysis revealed that the alkyl chain tether to SWCNT, MWCNT, and graphene surface, presumably through π-π interactions between the carbon-carbon double bond in the alkyl chain and the aromatic rings of CNPs. The hydrophilic polyethoxylate chains extend into the aqueous environment and stabilize the suspension by steric hindrance. MD simulations also showed that Tween-80 molecules interact with the CNP surface via the alkyl chain, thus corroborating spectroscopy results. MD simulations additionally revealed that Tween-80 aggregates on the CNP surface shifted from planar to micelle-like with increasing Tween-80 ratios, underscoring concentration-dependent changes in the nature of these interactions.

Mechanism of the Micellar Solubilization of Curcumin by Mixed Surfactants of SDS and Brij35 via NMR Spectroscopy

The micellar solubilization mechanism of curcumin by mixed surfactants of SDS and Brij35 was investigated at the molecular scale by NMR spectroscopy. Through the investigation of the micelle formation process, types and structures of mixed micelles and solubilization sites, the intrinsic factors influencing the solubilization capacity were revealed. For systems with α_SDS = 0.5 and 0.2, the obtained molar solubilization ratios (MSRs) are consistent with the MSR_ideal values. However, for α_SDS = 0.8, the solubilization capacity of curcumin is weakened compared to the MSR_ideal. Furthermore, only one single mixed SDS/Brij35 micelles are formed for α_SDS = 0.5 and 0.2. However, for α_SDS = 0.8, there are separate SDS-rich and Brij35-rich mixed micelles formed. In addition, NOESY spectra show that the interaction patterns of SDS and Brij35 in mixed micelles are similar for three systems, as are the solubilization sites of curcumin. Therefore, for α_SDS = 0.5 and 0.2 with single mixed micelles formed, the solubility of curcumin depends only on the mixed micelle composition, which is almost equal to the surfactant molar ratio. Although curcumin is solubilized in both separate micelles at α_SDS = 0.8, a less stable micelle structure may be responsible for the low solubility. This study provides new insights into the investigation and application of mixed micelle solubilization.

Interfacial protein-protein displacement at fluid interfaces

Protein blends are used to stabilise many traditional and emerging emulsion products, resulting in complex, non-equilibrated interfacial structures. The interface composition just after emulsification is dependent on the competitive adsorption between proteins. Over time, non-adsorbed proteins are capable of displacing the initially adsorbed ones. Such rearrangements are important to consider, since the integrity of the interfacial film could be compromised after partial displacement, which may result in the physical destabilisation of emulsions. In the present review, we critically describe various experimental techniques to assess the interfacial composition, properties and mechanisms of protein displacement. The type of information that can be obtained from the different techniques is described, from which we comment on their suitability for displacement studies. Comparative studies between model interfaces and emulsions allow for evaluating the impact of minor components and the different fluid dynamics during interface formation. We extensively discuss available mechanistic physical models that describe interfacial properties and the dynamics of complex mixed systems, with a focus on protein in-plane and bulk-interface interactions. The potential of Brownian dynamic simulations to describe the parameters that govern interfacial displacement is also addressed. This review thus provides ample information for characterising the interfacial properties over time in protein blend-stabilised emulsions, based on both experimental and modelling approaches.

Multiphase Drug Distribution and Exchange in Oil-in-Water Nanoemulsion Revealed by High-Resolution 19F qNMR

An oil-in-water (o/w) nanoemulsion (NE), composed of oil globules, stabilized by a surfactant, and dispersed in an aqueous phase, is increasingly developed in complex drug formulation. Kinetically stable NEs are used to formulate hydrophobic drugs and typically provide higher dosage strengths and better content uniformity. However, little is known accurately about drug distribution in its multiphase solution, especially for the possible drug presence in the surfactant (s) phase, the interface layer between the dispersed oil (o) and the continuous water (w) phases. Here, high-resolution ¹⁹F quantitative NMR spectroscopy was applied directly and noninvasively on an o/w NE drug product containing difluprednate (DFPN). The well-resolved ¹⁹F peaks of DFPN depended on the shielding molecules in each phase, which revealed mass-balanced DFPN distribution in multiple phases of (w), (s), and (o) of NE globules at a quantity of 1.8 ± 0.1, 35 ± 2, and 59 ± 3% per labeled content, respectively. Furthermore, the dilution-dependent ¹⁹F peak line broadening and shift suggested a millisecond dynamic exchange between the NE and the less-noticed smaller but thermodynamically stable microemulsion (ME) globules in NE solution. The high-resolution NMR result revealed that the drug availability could be quickly achieved using an o/w NE formulation because of the drug multiphase distribution and the ME-assisted fast drug exchange among globules.

Product selectivity in the photoreaction of aryl sulfonates and mesylate of estrone derivatives in sustainable and micellar media: a steady-state investigation

The photochemical reaction of sulfonate steroids in a sustainable environment was carried out successfully under steady-state conditions. Significant selectivity in photoproduct formation was also observed.

Water reorientation dynamics in colloidal water-oil emulsions

We study the molecular-scale properties of colloidal water-oil emulsions consisting of 120-290 nm oil droplets embedded in water. This type of emulsion can be prepared with low concentrations of surfactants and is usually kinetically stable. Even though colloidal water-oil emulsions are used ubiquitously, their molecular properties are still poorly understood. Here we study the orientational dynamics of water molecules in these emulsions using polarization resolved pump-probe infrared spectroscopy, for varying surfactant concentrations, droplet sizes, and temperatures. We find that the majority of the water molecules reorients with the same time constant as in bulk water, while a small fraction of the water molecules reorients on a much longer time scale. These slowly reorienting water molecules are interacting with the surface of the oil droplets. The fraction of slowly orienting water molecules is proportional to the oil volume fraction, and shows a negligible dependence on the average droplet size. This finding indicates that the total surface area of the oil droplets is quite independent of the average droplet size, which indicates that the larger oil droplets are quite corrugated, showing large protrusions into the water phase.

Induced selectivity in the photochemistry of estrone derivatives in sustainable and micellar environment: preparative and mechanistic studies

In this study, we carried out preparative and mechanistic studies on the photochemical reaction of a series of 3-acylestrone derivatives in confined and sustainable micellar environment under steady-state conditions and the results were compared with those obtained in cyclohexane solution. The aim of this work is mainly focused to show whether the nature of the surfactant (cationic, neutral and anionic) leads to noticeable selectivity in the photoproduct formation. The 3-acylestrone derivatives underwent the photo-Fries rearrangement, with concomitant homolytic fragmentation of the ester group and [1;3]-acyl migration. This pathway afforded the ortho-acyl estrone derivatives, the main photoproducts together with estrone. However, epimerization of the ortho regioisomer 2-acetylestrone and estrone through Norrish Type I photoreaction occurred involving the fragmentation of the C-α at the carbonyl group (C-17) of the steroid. UV-visible and 2D-NMR (NOESY) spectroscopies have been employed to measure the binding constant K_b and the location of the steroids within the hydrophobic core of the micelle.

Synthesis, self-assembly and Langerin recognition studies of a resorcinarene-based glycocluster exposing a hyaluronic acid thiodisaccharide mimetic

Herein, we report the synthesis of an octavalent glycocluster exposing a thiodisaccharide mimetic of the repetitive unit of hyaluronic acid, βSGlcA(1 → 3)βSGlcNAc, constructed on a calix[4]resorcinarene scaffold by CuAAC reaction of suitable precursors. This glycocluster showed a strong tendency toward self-aggregation. DOSY-NMR and DLS experiments demonstrated the formation of spherical micelles of d ≅ 6.2 nm, in good agreement. TEM micrographs showed the presence of particles of different sizes, depending on the pH of the starting solution, thus evidencing that the negative charge on the micelle surface due to ionization of the GlcA residues plays an important role in the aggregation process. STD-NMR and DLS experiments provided evidence of the interaction between the synthetic glycocluster and Langerin, a relevant C-type lectin. This interaction was not observed in the STD-NMR experiments performed with the basic disaccharide, providing evidence of a multivalent effect.

Studying the "Rigid-Flexible" Properties of Polymeric Micelle Core-Forming Segments with a Hydrophobic Phthalocyanine Probe Using NMR and UV Spectroscopy

The aim of the performed studies was to thoroughly examine the internal structure of self-assembled nanocarriers (i.e., polymeric micelles-PMs) by means of a hydrophobic phthalocyanine probe in order to identify the crucial features that are required to enhance the photoactive probe stability and reactivity. PMs of hydrophilic poly(ethylene glycol) and hydrophobic poly(ε-caprolactone) (PCL) or poly(d,l-lactide) (PDLLA) were fabricated and loaded with tetra tert-butyl zinc(II) phthalocyanine (ZnPc-t-but₄), a multifunctional spectroscopic probe with a profound ability to generate singlet oxygen upon irradiation. The presence of subdomains, comprising "rigid" and "flexible" regions, in the studied block copolymers' micelles as well as their interactions with the probe molecules, were assessed by various high-resolution NMR measurements [e.g., through-space magnetic interactions by the 1D NOE effect, pulsed field gradient spin-echo, and spin-lattice relaxation time (T₁) techniques]. The studies of the impact of the core-type microenvironment on the ZnPc-t-but₄ photochemical performance also included photobleaching and reactive oxygen species measurements. ZnPc-t-but₄ molecules were found to exhibit spatial proximity effects with both (PCL and PDLLA) hydrophobic polymer chains and interact with both subdomains, which are characterized by different rigidities. It was deduced that the interfaces between particular subdomains constitute an optimal host space for probe molecules, especially in the context of photochemical stability, photoactivity (i.e., for significant enhancement of singlet oxygen generation rates), and aggregation prevention. The present contribution proves that the combination of an appropriate probe, high-resolution NMR techniques, and UV-vis spectroscopy enables one to gain complex information about the subtle structure of PMs essential for their application as nanocarriers for photoactive compounds, for example, in photodynamic therapy, nanotheranostics, combination therapy, or photocatalysis, where the micelles constitute the optimal microenvironment for the desired photoreactions.

Hydrophobically Functionalized Poly(Acrylic Acid) Comprising the Ester-Type Labile Spacer: Synthesis and Self-Organization in Water

One of the most important properties of hydrophobically functionalized polyelectrolytes (HF-PEs) and their assemblies is their ability to encapsulate hydrophobic/amphiphilic agents and provide release on demand of the entrapped payload. The aim of the present work was to synthesize and study self-organization behavior in aqueous solution of hydrophobically functionalized poly(acrylic acid) (PAA) comprising the ester-type pH labile moiety with various degrees of hydrophobization and side-chain lengths in the absence and presence of appropriate mono- and polyvalent electrolytes (i.e., NaCl or CaCl₂). The synthesis and purification of hydrophobically functionalized PAA were performed under mild conditions in order to avoid chemical degradation of the polymers. The modified polyelectrolytes self-assembly in aqueous systems was monitored using diffusion-ordered nuclear magnetic resonance (DOSY NMR). The performed studies, supported by the all-atoms molecular dynamics simulations, revealed a strong dependence of polyelectrolyte self-assembled state on concentration—specific concentration regions with the coexistence of both smaller and larger aggregates were observed (values of hydrodynamic diameter D_H around one nanometer and between two to six nanometers, respectively). Our investigations enabled us to gain crucial information about the self-assembly of the hydrophobically functionalized poly(acrylic acid) and opened the possibility of understanding and predicting its performance under various conditions.

Identification and characterization of bilgewater emulsions

Literature on bilgewater focuses on empirically determined treatment methods and lacks specific information on emulsion characteristics. Therefore, this review discusses potential emulsion stabilization mechanisms that occur in bilgewater and evaluates common approaches to study their behavior. Current knowledge on emulsion formation, stabilization, and destabilization is outlined to provide researchers and bilgewater treatment operators with the knowledge needed to determine emulsion prevention and treatment strategies. Furthermore, a broad assessment of bilgewater emulsion characterization techniques, from general water quality analysis to advanced droplet stability characterization methods are discussed in detail. Lastly, a survey of typical bilgewater characteristics and information on standard synthetic bilgewater mixtures used in the testing of oil pollution abatement equipment are presented. Overall, the goal of this article is to provide a better understanding of physical and thermodynamic properties of emulsions to help improve bilgewater treatment and management.

Integration of PEG 400 into a self-nanoemulsifying drug delivery system improves drug loading capacity and nasal mucosa permeability and prolongs the survival of rats with malignant brain tumors

Introduction: Kolliphor^® EL (K-EL) is among the most useful surfactants in the preparation of emulsions. However, it is associated with low hydrophobic drug loading in the resulting emulsified formulation.

Methods: In this study, a formulation for intranasal administration of butylidenephthalide (Bdph), a candidate drug against glioblastoma (GBM), was prepared. Physical characteristics of the formulation such as particle size, zeta potential, conductivity, and viscosity were assessed, as well as its cytotoxicity and permeability, in order to optimize the formulation and improve its drug loading capacity.

Results: The optimized formulation involved the integration of polyethylene glycol 400 (PEG 400) in K-EL to encapsulate Bdph dissolved in dimethyl sulfoxide (DMSO), and it exhibited higher drug loading capacity and drug solubility in water than the old formulation, which did not contain PEG 400. Incorporation of PEG 400 as a co-surfactant increased Bdph loading capacity to up to 50% (v/v), even in formulations using Kolliphor^® HS 15 (K-HS15) as a surfactant, which is less compatible with Bdph than K-EL. The optimized Bdph formulation presented 5- and 2.5-fold higher permeability and cytotoxicity, respectively, in human GBM than stock Bdph. This could be attributed to the high drug loading capacity and the high polarity index due to DMSO, which increases the compatibility between the drug and the cell. Rats bearing a brain glioma treated with 160 mg/kg intranasal emulsified Bdph had a mean survival of 37 days, which is the same survival time achieved by treatment with 320 mg/kg stock Bdph. This implies that the optimized emulsified formulation required only half the Bdph dose to achieve an efficacy similar to that of stock Bdph in the treatment of animals with malignant brain tumor.

Nuclear Magnetic Resonance (NMR) Spectroscopy in Food Science: A Comprehensive Review

Nuclear magnetic resonance (NMR) spectroscopy is a robust method, which can rapidly analyze mixtures at the molecular level without requiring separation and/or purification steps, making it ideal for applications in food science. Despite its increasing popularity among food scientists, NMR is still an underutilized methodology in this area, mainly due to its high cost, relatively low sensitivity, and the lack of NMR expertise by many food scientists. The aim of this review is to help bridge the knowledge gap that may exist when attempting to apply NMR methodologies to the field of food science. We begin by covering the basic principles required to apply NMR to the study of foods and nutrients. A description of the discipline of chemometrics is provided, as the combination of NMR with multivariate statistical analysis is a powerful approach for addressing modern challenges in food science. Furthermore, a comprehensive overview of recent and key applications in the areas of compositional analysis, food authentication, quality control, and human nutrition is provided. In addition to standard NMR techniques, more sophisticated NMR applications are also presented, although limitations, gaps, and potentials are discussed. We hope this review will help scientists gain some of the knowledge required to apply the powerful methodology of NMR to the rich and diverse field of food science.

A Simple and Noninvasive DOSY NMR Method for Droplet Size Measurement of Intact Oil-In-Water Emulsion Drug Products

In a typical oil-in-water emulsion drug product, oil droplets with varied sizes are dispersed in a water phase and stabilized by surfactant molecules. The size and polydispersity of oil droplets are critical quality attributes of the emulsion drug product that can potentially affect drug bioavailability. More critically, to ensure accuracy in characterization of the finished drug product, analytical methods should introduce minimal physical perturbation (e.g., temperature variation or dilution) before the analysis. The classical methods of dynamic light scattering or electron microscopy can be used but they generally require sample dilution or harsh preparation conditions, respectively. By contrast, the size distribution of emulsion formulations can be assessed with a simple and noninvasive solution nuclear magnetic resonance method, namely, two-dimensional Diffusion Ordered SpectroscopY. The two-dimensional Diffusion Ordered SpectroscopY method probed signal decay of methyl resonances from oil and sorbate molecules and was applied to 3 types of U.S.-marketed emulsion drug products, that is, difluprednate, cyclosporine, and propofol, yielding measured droplet sizes of 40-280 nm in diameter. The high precision of ±6 nm of the new nuclear magnetic resonance method allows analytical differentiation of lot-to-lot and brand-to-brand droplet size differences in emulsion drug products, critical for drug-quality development, control, and surveillance.