1
|
Piccoli V, Martínez L. Competitive Effects of Anions on Protein Solvation by Aqueous Ionic Liquids. J Phys Chem B 2024; 128:7792-7802. [PMID: 39092664 PMCID: PMC11331513 DOI: 10.1021/acs.jpcb.4c03735] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/04/2024] [Revised: 07/12/2024] [Accepted: 07/29/2024] [Indexed: 08/04/2024]
Abstract
The present study utilizes molecular dynamics simulations to examine how different anions compete for protein solvation in aqueous solutions of ionic liquids (ILs). Ubiquitin is used as model protein and studied in IL mixtures sharing the same cation, 1-ethyl-3-methylimidazolium (EMIM), and two different anions in the same solution, from combinations of dicyanamide (DCA), chloride (Cl), nitrate (NO3), and tetrafluoroborate (BF4). Our findings reveal that specific interactions between anions and the protein are paramount in IL solvation, but that combinations of anions are not additive. For example, DCA exhibits a remarkable ability to form hydrogen bonds with the protein, resulting in a significantly stronger preferential binding to the protein than other anions. However, the combination of DCA with NO3, which also forms hydrogen bonds with the protein, results in a smaller preferential solvation of the protein than the combination of DCA with chloride ions, which are weaker binders. Thus, combining anions with varying affinities for the protein surface modulates the overall ion accumulation through nonadditive mechanisms, highlighting the importance of the understanding of competition for specific interaction sites, cooperative binding, bulk-solution affinity, and overall charge compensations, on the overall solvation capacity of the solution. Such knowledge may allow for the design of novel IL-based processes in biotechnology and material science, where fine-tuning protein solvation is crucial for optimizing performance and functionality.
Collapse
Affiliation(s)
- Vinicius Piccoli
- Institute of Chemistry and
Center for Computing in Engineering & Science, Universidade Estadual de Campinas (UNICAMP), Campinas 13083-872, SP, Brazil
| | - Leandro Martínez
- Institute of Chemistry and
Center for Computing in Engineering & Science, Universidade Estadual de Campinas (UNICAMP), Campinas 13083-872, SP, Brazil
| |
Collapse
|
2
|
Gresham IJ, Johnson EC, Robertson H, Willott JD, Webber GB, Wanless EJ, Nelson ARJ, Prescott SW. Comparing polymer-surfactant complexes to polyelectrolytes. J Colloid Interface Sci 2024; 655:262-272. [PMID: 37944374 DOI: 10.1016/j.jcis.2023.10.101] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2023] [Revised: 10/12/2023] [Accepted: 10/19/2023] [Indexed: 11/12/2023]
Abstract
HYPOTHESIS Understanding the complex interactions between polymers and surfactants is required to optimise commercially relevant systems such as paint, toothpaste and detergent. Neutral polymers complex with surfactants, forming 'pearl necklace' structures that are often conceptualised as pseudo-polyelectrolytes. Here we pose two questions to test the limits of this analogy: Firstly, in the presence of salt, do these polymer-surfactant systems behave like polyelectrolytes? Secondly, do polymer-surfactant complexes resist geometric confinement like polyelectrolytes? EXPERIMENTS We test the limits of the pseudo-polyelectrolyte analogy through studying a poly(N-isopropylacrylamide) (PNIPAM) brush in the presence of sodium dodecylsulfate (SDS). Brushes are ideal for interrogating pseudo-polyelectrolytes, as neutral and polyelectrolyte brushes exhibit distinct and well understood behaviours. Spectroscopic ellipsometry, quartz crystal microbalance with dissipation monitoring (QCM-D), and neutron reflectometry (NR) were used to monitor the behaviour and structure of the PNIPAM-SDS system as a function of NaCl concentration. The ability of the PNIPAM-SDS complex to resist geometric confinement was probed with NR. FINDINGS At a fixed SDS concentration below the zero-salt CMC, increasing NaCl concentration <100 mM promoted brush swelling due to an increase in osmotic pressure, not dissimilar to a weak polyelectrolyte. At these salt concentrations, the swelling of the brush could be described by a single parameter: the effective CMC. However, at high NaCl concentrations (e.g., 500 mM) no brush collapse was observed at all (non-zero) concentrations of SDS studied, contrary to what is seen for many polyelectrolytes. Study of the polymer-surfactant system under confinement revealed that the physical volume of surfactant dominates the structure of the strongly confined system, which further differentiates it from the polyelectrolyte case.
Collapse
Affiliation(s)
- Isaac J Gresham
- School of Chemical Engineering, UNSW Sydney, Sydney, 2052, NSW, Australia
| | - Edwin C Johnson
- College of Science, Engineering and Environment, University of Newcastle, Callaghan, 2308, NSW, Australia
| | - Hayden Robertson
- College of Science, Engineering and Environment, University of Newcastle, Callaghan, 2308, NSW, Australia
| | - Joshua D Willott
- College of Science, Engineering and Environment, University of Newcastle, Callaghan, 2308, NSW, Australia
| | - Grant B Webber
- College of Science, Engineering and Environment, University of Newcastle, Callaghan, 2308, NSW, Australia
| | - Erica J Wanless
- College of Science, Engineering and Environment, University of Newcastle, Callaghan, 2308, NSW, Australia
| | | | - Stuart W Prescott
- School of Chemical Engineering, UNSW Sydney, Sydney, 2052, NSW, Australia.
| |
Collapse
|
3
|
Robertson H, Gresham IJ, Nelson ARJ, Gregory KP, Johnson EC, Willott JD, Prescott SW, Webber GB, Wanless EJ. Solvent-Modulated Specific Ion Effects: Poly( N-isopropylacrylamide) Brushes in Nonaqueous Electrolytes. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:335-347. [PMID: 38117209 PMCID: PMC10910595 DOI: 10.1021/acs.langmuir.3c02596] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2023] [Revised: 12/04/2023] [Accepted: 12/08/2023] [Indexed: 12/21/2023]
Abstract
Pertinent to cryopreservation as well as energy storage and batteries, nonaqueous electrolytes and their mixtures with water were investigated. In particular, specific ion-induced effects on the modulation of a poly(N-isopropylacrylamide) (PNIPAM) brush were investigated in various dimethyl sulfoxide (DMSO)-water solvent mixtures. Spectroscopic ellipsometry and neutron reflectometry were employed to probe changes in brush swelling and structure, respectively. In water-rich solvents (i.e., pure water and 6 mol % DMSO), PNIPAM undergoes a swollen to collapsed thermotransition with increasing temperature, whereby a forward Hofmeister series was noted; K+ and Li+ electrolytes composed of SCN- and I- salted-in (stabilized) PNIPAM chains, and electrolytes of Cl- and Br- salted-out (destabilized) the polymer. The cation was seen to play a lesser role than that of the anion, merely modulating the magnitude of the anion effect. In 70 mol % DMSO, a collapsed to swollen thermotransition was noted for PNIPAM. Here, concentration-dependent specific ion effects were observed; a forward series was observed in 0.2 mol % electrolytes, whereas increasing the electrolyte concentration to 0.9 mol % led to a series reversal. While no thermotransition was observed in pure DMSO, a solvent-induced specific ion series reversal was noted; SCN- destabilized the brush and Cl- stabilized the brush. Both series reversals are attributed to the delicate balance of interactions between the solvent, solute (ion), and substrate (brush). Namely, the stability of the solvent clusters was hypothesized to drive polymer solvation.
Collapse
Affiliation(s)
- Hayden Robertson
- College
of Science, Engineering and Environment, University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Isaac J. Gresham
- School
of Chemistry, University of Sydney, Sydney 2052, Australia
| | - Andrew R. J. Nelson
- Australian
Centre for Neutron Scattering, ANSTO, Locked Bag 2001, Kirrawee DC, New South Wales 2232, Australia
| | - Kasimir P. Gregory
- Division
of Biomedical Science and Biochemistry, Research School of Biology, The Australian National University, Canberra, Australian Capital
Territory 0200, Australia
| | - Edwin C. Johnson
- Department
of Chemistry, University of Sheffield, Dainton Building, Brook Hill, Sheffield S3 7HF, U.K.
| | - Joshua D. Willott
- College
of Science, Engineering and Environment, University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Stuart W. Prescott
- School of
Chemical Engineering, UNSW Sydney, Sydney, New South Wales 2052, Australia
| | - Grant B. Webber
- College
of Science, Engineering and Environment, University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Erica J. Wanless
- College
of Science, Engineering and Environment, University of Newcastle, Callaghan, New South Wales 2308, Australia
| |
Collapse
|
4
|
Yu Z, Ma Y, Mao L, Lian Y, Xiao Y, Chen Z, Zhang Y. Bidirectional optical response hydrogel with adjustable human comfort temperature for smart windows. MATERIALS HORIZONS 2024; 11:207-216. [PMID: 37888540 DOI: 10.1039/d3mh01376f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/28/2023]
Abstract
Smart windows are effective in reducing the energy consumption of air conditioning and lighting systems, while contributing to maintaining the comfort zone of temperature in the indoor environment. Currently used smart windows mainly rely on traditional single-phase thermochromic material in which only one abrupt optical change occurs during temperature changes, and their inherent characteristics may not be suited for a practical balance of energy saving and privacy protection. Here, we developed a novel bidirectional optically responsive smart window (BSW) with unique bidirectional optical response features by introducing sodium dodecyl sulfate (SDS)/potassium tartrate (PTH) micelles into PNIPAM hydrogel to form a composite hydrogel, which was encapsulated in two glass panels. The upper critical solution temperature (UCST) and lowest critical solution temperature (LCST) of the material can be individually adjusted and are capable of matching the human comfort zone of temperature. In addition, the smart window exhibits remarkable transparency (92.5%), visible light transmission ratio (Tlum = 91.31%), and excellent solar modulation (ΔTsol,UCST = 76.34%, ΔTsol,LCST = 76.75%). Moreover, it possesses selectivity in transmitting light in the infrared band of solar radiation and can complete the "transparent-opaque" transition in a very narrow temperature range (<1 °C). When at comfortable temperatures, the highly transparent smart windows facilitate interior light and appreciation of the view. At low temperatures, SDS/PTH micelles aggregate to form large micelles, blocking the transmission of light and protecting customer privacy. At high temperatures, PNIPAM can undergo a "sol-gel" transition, thus blocking incident solar radiation. Taken together, these proposed materials with bidirectional optical response characteristics would be harnessed as a promising platform for building energy conservation, anti-counterfeiting, information encryption, and temperature monitoring.
Collapse
Affiliation(s)
- Zhenkun Yu
- Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Hubei Provincial Engineering Center of Performance Chemicals, College of Chemistry and Chemical Engineering, Hubei University, Wuhan 430062, China.
| | - Yulin Ma
- Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Hubei Provincial Engineering Center of Performance Chemicals, College of Chemistry and Chemical Engineering, Hubei University, Wuhan 430062, China.
| | - Linhan Mao
- Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Hubei Provincial Engineering Center of Performance Chemicals, College of Chemistry and Chemical Engineering, Hubei University, Wuhan 430062, China.
| | - Yue Lian
- Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Hubei Provincial Engineering Center of Performance Chemicals, College of Chemistry and Chemical Engineering, Hubei University, Wuhan 430062, China.
| | - Yanwen Xiao
- Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Hubei Provincial Engineering Center of Performance Chemicals, College of Chemistry and Chemical Engineering, Hubei University, Wuhan 430062, China.
| | - Zhaoxia Chen
- Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Hubei Provincial Engineering Center of Performance Chemicals, College of Chemistry and Chemical Engineering, Hubei University, Wuhan 430062, China.
| | - Yuhong Zhang
- Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Hubei Provincial Engineering Center of Performance Chemicals, College of Chemistry and Chemical Engineering, Hubei University, Wuhan 430062, China.
| |
Collapse
|
5
|
Wu X, Barner-Kowollik C. Fluorescence-readout as a powerful macromolecular characterisation tool. Chem Sci 2023; 14:12815-12849. [PMID: 38023522 PMCID: PMC10664555 DOI: 10.1039/d3sc04052f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2023] [Accepted: 10/10/2023] [Indexed: 12/01/2023] Open
Abstract
The last few decades have witnessed significant progress in synthetic macromolecular chemistry, which can provide access to diverse macromolecules with varying structural complexities, topology and functionalities, bringing us closer to the aim of controlling soft matter material properties with molecular precision. To reach this goal, the development of advanced analytical techniques, allowing for micro-, molecular level and real-time investigation, is essential. Due to their appealing features, including high sensitivity, large contrast, fast and real-time response, as well as non-invasive characteristics, fluorescence-based techniques have emerged as a powerful tool for macromolecular characterisation to provide detailed information and give new and deep insights beyond those offered by commonly applied analytical methods. Herein, we critically examine how fluorescence phenomena, principles and techniques can be effectively exploited to characterise macromolecules and soft matter materials and to further unravel their constitution, by highlighting representative examples of recent advances across major areas of polymer and materials science, ranging from polymer molecular weight and conversion, architecture, conformation to polymer self-assembly to surfaces, gels and 3D printing. Finally, we discuss the opportunities for fluorescence-readout to further advance the development of macromolecules, leading to the design of polymers and soft matter materials with pre-determined and adaptable properties.
Collapse
Affiliation(s)
- Xingyu Wu
- School of Chemistry and Physics, Centre for Materials Science, Queensland University of Technology (QUT) 2 George Street Brisbane QLD 4000 Australia
| | - Christopher Barner-Kowollik
- School of Chemistry and Physics, Centre for Materials Science, Queensland University of Technology (QUT) 2 George Street Brisbane QLD 4000 Australia
- Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT) Hermann-von-Helmholtz-Platz 1 76344 Eggenstein-Leopoldshafen Germany
| |
Collapse
|
6
|
Hemmatpour H, Haddadi-Asl V, Burgers TCQ, Yan F, Stuart MCA, Reker-Smit C, Vlijm R, Salvati A, Rudolf P. Temperature-responsive and biocompatible nanocarriers based on clay nanotubes for controlled anti-cancer drug release. NANOSCALE 2023; 15:2402-2416. [PMID: 36651239 DOI: 10.1039/d2nr06801j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Administration of temperature-responsive drug carriers that release anticancer drugs at high temperatures can benefit hyperthermia therapies because of the synergistic effect of anticancer drug molecules and high temperature on killing the cancer cells. In this study, we design and characterize a new temperature-responsive nanocarrier based on a naturally occurring and biocompatible clay mineral, halloysite nanotubes. Poly(N-isopropylacrylamide) brushes were grown on the surface of halloysite nanotubes using a combination of mussel-inspired dopamine polymerization and surface-initiated atom transfer radical polymerization. The chemical structure of the hybrid materials was investigated using X-ray photoelectron spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The hybrid material was shown to have a phase transition temperature of about 32 °C, corresponding to a 40 nm thick polymer layer surrounding the nanotubes. Cell studies suggested that grafting of poly(N-isopropylacrylamide) brushes on the polydopamine-modified halloysite nanotubes suppresses the cytotoxicity caused by the polydopamine interlayer and drug release studies on nanotubes loaded with doxorubicin showed that thanks to the poly(N-isopropylacrylamide) brushes a temperature-dependent drug release is observed. Finally, a fluorescent dye molecule was covalently attached to the polymer-grafted nanotubes and stimulated emission depletion nanoscopy was used to confirm the internalization of the nanotubes in HeLa cells.
Collapse
Affiliation(s)
- Hamoon Hemmatpour
- Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands.
- Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, P.O. Box 1587-4413, Tehran, Iran
| | - Vahid Haddadi-Asl
- Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, P.O. Box 1587-4413, Tehran, Iran
| | - Thomas C Q Burgers
- Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands.
| | - Feng Yan
- Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands.
| | - Marc C A Stuart
- Electron Microscopy, Groningen Biomolecular Sciences and Biotechnology Institute, University of Groningen, Nijenborgh 7, 9747AG Groningen, The Netherlands
| | - Catharina Reker-Smit
- Department of Nanomedicine & Drug Targeting, Groningen Research Institute of Pharmacy, University of Groningen, A. Deusinglaan 1, Groningen, 9713AV, The Netherlands
| | - Rifka Vlijm
- Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands.
| | - Anna Salvati
- Department of Nanomedicine & Drug Targeting, Groningen Research Institute of Pharmacy, University of Groningen, A. Deusinglaan 1, Groningen, 9713AV, The Netherlands
| | - Petra Rudolf
- Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands.
| |
Collapse
|
7
|
Reitenbach J, Geiger C, Wang P, Vagias A, Cubitt R, Schanzenbach D, Laschewsky A, Papadakis CM, Müller-Buschbaum P. Effect of Magnesium Salts with Chaotropic Anions on the Swelling Behavior of PNIPMAM Thin Films. Macromolecules 2023. [DOI: 10.1021/acs.macromol.2c02282] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023]
Affiliation(s)
- Julija Reitenbach
- TUM School of Natural Sciences, Department of Physics, Chair for Functional Materials, Technical University of Munich, James-Franck-Str. 1, 85748 Garching, Germany
| | - Christina Geiger
- TUM School of Natural Sciences, Department of Physics, Chair for Functional Materials, Technical University of Munich, James-Franck-Str. 1, 85748 Garching, Germany
| | - Peixi Wang
- TUM School of Natural Sciences, Department of Physics, Chair for Functional Materials, Technical University of Munich, James-Franck-Str. 1, 85748 Garching, Germany
| | - Apostolos Vagias
- Heinz Maier-Leibnitz Zentrum (MLZ), Technical University of Munich, Lichtenbergstr. 1, 85748 Garching, Germany
| | - Robert Cubitt
- Institut Laue-Langevin, 6 rue Jules Horowitz, 38000 Grenoble, France
| | - Dirk Schanzenbach
- Institut für Chemie, Universität Potsdam, Karl-Liebknecht-Str. 24-25, 14476 Potsdam-Golm, Germany
| | - André Laschewsky
- Institut für Chemie, Universität Potsdam, Karl-Liebknecht-Str. 24-25, 14476 Potsdam-Golm, Germany
- Fraunhofer Institut für Angewandte Polymerforschung, Geiselbergstr. 69, 14476 Potsdam-Golm, Germany
| | - Christine M. Papadakis
- TUM School of Natural Sciences, Department of Physics, Fachgebiet Physik weicher Materie, Technical University of Munich, James-Franck-Str. 1, 85748 Garching, Germany
| | - Peter Müller-Buschbaum
- TUM School of Natural Sciences, Department of Physics, Chair for Functional Materials, Technical University of Munich, James-Franck-Str. 1, 85748 Garching, Germany
- Heinz Maier-Leibnitz Zentrum (MLZ), Technical University of Munich, Lichtenbergstr. 1, 85748 Garching, Germany
| |
Collapse
|
8
|
Robertson H, Nelson ARJ, Prescott SW, Webber GB, Wanless EJ. Cosolvent effects on the structure and thermoresponse of a polymer brush: PNIPAM in DMSO–water mixtures. Polym Chem 2023. [DOI: 10.1039/d2py01487d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/12/2023]
Abstract
Structural characterisation of thermoresponsive polymer brushes in binary DMSO–water mixtures reveals both LCST and UCST behaviour.
Collapse
Affiliation(s)
- Hayden Robertson
- College of Science, Engineering and Environment, University of Newcastle, Callaghan, Australia
| | | | | | - Grant B. Webber
- College of Science, Engineering and Environment, University of Newcastle, Callaghan, Australia
| | - Erica J. Wanless
- College of Science, Engineering and Environment, University of Newcastle, Callaghan, Australia
| |
Collapse
|
9
|
Lin M, Raghuwanshi VS, Browne C, Simon GP, Garnier G. Tailoring the humidity response of cellulose nanocrystal-based films by specific ion effects. J Colloid Interface Sci 2023; 629:694-704. [PMID: 36183648 DOI: 10.1016/j.jcis.2022.09.101] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/18/2022] [Revised: 09/15/2022] [Accepted: 09/19/2022] [Indexed: 11/21/2022]
Abstract
HYPOTHESIS The optical properties and humidity response of iridescent films made of cellulose nanocrystal (CNC) and polyethylene glycol (PEG) can be tailored by the incorporation of electrolytes chosen based on specific ion effects (SIE). EXPERIMENTS A series of inorganic salts comprising five different cations and five anions based on the Hofmeister series were mixed with CNC/PEG suspensions, followed by an air-dried process into iridescent solid films. These films were tested in changing relative humidity (RH) environments from 30% to 90% and their photonic properties and mass change monitored. The underlying structures and the mechanism of their formation were quantified in terms of interparticle distance derived from small angle X-ray scattering experiment and pitch size quantified by scanning electron microscope (SEM). FINDINGS The specific color and color range of CNC/PEG based films are controlled by a specific anion effect achieved by selection of the salt while the specific cation effect is negligible. The salting-in type anions with the same valency result in a red-shift color when films are in the dried state. The salting-in type leads to a greater color changing range during RH changes than the salting-out type. The resultant mass gain/loss trend is consistent with the color change. In contrast, cations do not show any relationships between salting-in effect and the measured properties as observed for anions. The observed SIE can be used to engineer CNC/polymer-based humidity and bio-diagnostic colorimetric indicator devices.
Collapse
Affiliation(s)
- Maoqi Lin
- Bioresource Processing Research Institute of Australia (BioPRIA), Department of Chemical and Biological Engineering, Monash University, Clayton, VIC 3800, Australia
| | - Vikram Singh Raghuwanshi
- Bioresource Processing Research Institute of Australia (BioPRIA), Department of Chemical and Biological Engineering, Monash University, Clayton, VIC 3800, Australia
| | - Christine Browne
- Bioresource Processing Research Institute of Australia (BioPRIA), Department of Chemical and Biological Engineering, Monash University, Clayton, VIC 3800, Australia
| | - George P Simon
- Department of Materials Science and Engineering, Monash University, Clayton, VIC 3800, Australia
| | - Gil Garnier
- Bioresource Processing Research Institute of Australia (BioPRIA), Department of Chemical and Biological Engineering, Monash University, Clayton, VIC 3800, Australia.
| |
Collapse
|
10
|
Jadhav RW, Khobrekar PP, Bugde ST, Bhosale SV. Nanoarchitectonics of neomycin-derived fluorescent carbon dots for selective detection of Fe 3+ ions. ANALYTICAL METHODS : ADVANCING METHODS AND APPLICATIONS 2022; 14:3289-3298. [PMID: 35968579 DOI: 10.1039/d2ay01040b] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The first-ever neomycin antibiotic-based carbon dots (Neo-CDs) were synthesized via a low-cost, eco-friendly, and single-step hydrothermal method using neomycin as a single precursor. The as-prepared Neo-CDs exhibited strong and stable blue fluorescence and were well characterized by TEM, UV-vis absorption, fluorescence emission, IR, XRD, Raman and XPS spectroscopy methods. The Neo-CDs showed a well-distributed size within the range of 4.5 to 7.8 nm, comprising various functional groups on the surface of the carbon core. The Neo-CDs exhibited exceptional emission behaviour, and fluorescence quantum yield was calculated to be 55% in double distilled water. Neo-CDs have been used as a fluorescent sensor for selective and sensitive detection of Fe3+ ions in aqueous solution in the fluorescence turn-off mode. From the set of metal ions, only the Fe3+ ion showed quenching of fluorescence due to photoinduced (PET) electron transfer from Neo-CDs to the half-filled 3d orbital of Fe3+ ions. The limit of detection for Fe3+ ions was calculated to be 0.854 μM. Further, the quenching efficiency and Stern-Volmer quenching constant have been calculated which are about 94% and 5.6 × 106 M-1, respectively.
Collapse
Affiliation(s)
- Ratan W Jadhav
- School of Chemical Sciences, Goa University, Taleigao Plateau, Goa-403 206, India.
| | - Pritesh P Khobrekar
- School of Chemical Sciences, Goa University, Taleigao Plateau, Goa-403 206, India.
| | - Sandesh T Bugde
- School of Chemical Sciences, Goa University, Taleigao Plateau, Goa-403 206, India.
| | - Sheshanath V Bhosale
- School of Chemical Sciences, Goa University, Taleigao Plateau, Goa-403 206, India.
| |
Collapse
|
11
|
Gregory KP, Elliott GR, Robertson H, Kumar A, Wanless EJ, Webber GB, Craig VSJ, Andersson GG, Page AJ. Understanding specific ion effects and the Hofmeister series. Phys Chem Chem Phys 2022; 24:12682-12718. [PMID: 35543205 DOI: 10.1039/d2cp00847e] [Citation(s) in RCA: 87] [Impact Index Per Article: 43.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
Abstract
Specific ion effects (SIE), encompassing the Hofmeister Series, have been known for more than 130 years since Hofmeister and Lewith's foundational work. SIEs are ubiquitous and are observed across the medical, biological, chemical and industrial sciences. Nevertheless, no general predictive theory has yet been able to explain ion specificity across these fields; it remains impossible to predict when, how, and to what magnitude, a SIE will be observed. In part, this is due to the complexity of real systems in which ions, counterions, solvents and cosolutes all play varying roles, which give rise to anomalies and reversals in anticipated SIEs. Herein we review the historical explanations for SIE in water and the key ion properties that have been attributed to them. Systems where the Hofmeister series is perturbed or reversed are explored, as is the behaviour of ions at the liquid-vapour interface. We discuss SIEs in mixed electrolytes, nonaqueous solvents, and in highly concentrated electrolyte solutions - exciting frontiers in this field with particular relevance to biological and electrochemical applications. We conclude the perspective by summarising the challenges and opportunities facing this SIE research that highlight potential pathways towards a general predictive theory of SIE.
Collapse
Affiliation(s)
- Kasimir P Gregory
- Discipline of Chemistry, School of Environmental and Life Sciences, The University of Newcastle, Callaghan, New South Wales 2308, Australia. .,Department of Materials Physics, Research School of Physics, Australian National University, Canberra, ACT 0200, Australia
| | - Gareth R Elliott
- Discipline of Chemistry, School of Environmental and Life Sciences, The University of Newcastle, Callaghan, New South Wales 2308, Australia.
| | - Hayden Robertson
- Discipline of Chemistry, School of Environmental and Life Sciences, The University of Newcastle, Callaghan, New South Wales 2308, Australia.
| | - Anand Kumar
- Flinders Institute of Nanoscale Science and Technology, College of Science and Engineering, Flinders University, South Australia 5001, Australia
| | - Erica J Wanless
- Discipline of Chemistry, School of Environmental and Life Sciences, The University of Newcastle, Callaghan, New South Wales 2308, Australia.
| | - Grant B Webber
- School of Engineering, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Vincent S J Craig
- Department of Materials Physics, Research School of Physics, Australian National University, Canberra, ACT 0200, Australia
| | - Gunther G Andersson
- Flinders Institute of Nanoscale Science and Technology, College of Science and Engineering, Flinders University, South Australia 5001, Australia
| | - Alister J Page
- Discipline of Chemistry, School of Environmental and Life Sciences, The University of Newcastle, Callaghan, New South Wales 2308, Australia.
| |
Collapse
|
12
|
Elashnikov R, Rimpelová S, Lyutakov O, Pavlíčková VS, Khrystonko O, Kolská Z, Švorčík V. Ciprofloxacin-Loaded Poly( N-isopropylacrylamide- co-acrylamide)/Polycaprolactone Nanofibers as Dual Thermo- and pH-Responsive Antibacterial Materials. ACS APPLIED BIO MATERIALS 2022; 5:1700-1709. [DOI: 10.1021/acsabm.2c00069] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Roman Elashnikov
- Department of Solid State Engineering, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic
| | - Silvie Rimpelová
- Department of Biochemistry and Microbiology, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic
| | - Oleksiy Lyutakov
- Department of Solid State Engineering, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic
| | - Vladimíra Svobodová Pavlíčková
- Department of Biochemistry and Microbiology, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic
| | - Olena Khrystonko
- Department of Solid State Engineering, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic
| | - Zdeňka Kolská
- Materials Centre, Faculty of Science, J. E. Purkyně University, Pasteurova 15, 40096 Ústí nad Labem, Czech Republic
| | - Václav Švorčík
- Department of Solid State Engineering, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic
| |
Collapse
|
13
|
Gregory KP, Wanless EJ, Webber GB, Craig VSJ, Page AJ. The electrostatic origins of specific ion effects: quantifying the Hofmeister series for anions. Chem Sci 2021; 12:15007-15015. [PMID: 34976339 PMCID: PMC8612401 DOI: 10.1039/d1sc03568a] [Citation(s) in RCA: 38] [Impact Index Per Article: 12.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2021] [Accepted: 10/15/2021] [Indexed: 12/23/2022] Open
Abstract
Life as we know it is dependent upon water, or more specifically salty water. Without dissolved ions, the interactions between biological molecules are insufficiently complex to support life. This complexity is intimately tied to the variation in properties induced by the presence of different ions. These specific ion effects, widely known as Hofmeister effects, have been known for more than 100 years. They are ubiquitous throughout the chemical, biological and physical sciences. The origin of these effects and their relative strengths is still hotly debated. Here we reconsider the origins of specific ion effects through the lens of Coulomb interactions and establish a foundation for anion effects in aqueous and non-aqueous environments. We show that, for anions, the Hofmeister series can be explained and quantified by consideration of site-specific electrostatic interactions. This can simply be approximated by the radial charge density of the anion, which we have calculated for commonly reported ions. This broadly quantifies previously unpredictable specific ion effects, including those known to influence solution properties, virus activities and reaction rates. Furthermore, in non-aqueous solvents, the relative magnitude of the anion series is dependent on the Lewis acidity of the solvent, as measured by the Gutmann Acceptor Number. Analogous SIEs for cations bear limited correlation with their radial charge density, highlighting a fundamental asymmetry in the origins of specific ion effects for anions and cations, due to competing non-Coulombic phenomena.
Collapse
Affiliation(s)
- Kasimir P Gregory
- Discipline of Chemistry, School of Environmental and Life Sciences, The University of Newcastle Callaghan New South Wales 2308 Australia
| | - Erica J Wanless
- Discipline of Chemistry, School of Environmental and Life Sciences, The University of Newcastle Callaghan New South Wales 2308 Australia
| | - Grant B Webber
- School of Engineering, The University of Newcastle Callaghan New South Wales 2308 Australia
| | - Vincent S J Craig
- Department of Applied Mathematics, Research School of Physics, Australian National University Canberra ACT 0200 Australia
| | - Alister J Page
- Discipline of Chemistry, School of Environmental and Life Sciences, The University of Newcastle Callaghan New South Wales 2308 Australia
| |
Collapse
|
14
|
Demulsification Treatment of Spent Metalworking Fluids by Metal Cations: The Synergistic Effect and Efficiency Evaluation. Processes (Basel) 2021. [DOI: 10.3390/pr9101807] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023] Open
Abstract
In this paper, various metal ions were utilized for the demulsification of spent metalworking fluids discharged from an automobile parts workshop. Five types of metal ions, i.e., Fe3+, Al3+, Fe2+, Ca2+ and Mg2+, combined with coagulant were systematically evaluated, and the synergistic effect as well as the optimum operating conditions were studied. The results indicated that the Ca2+ as well Mg2+ possessed hardly efficiency for the demulsification, on the contrary, Fe2+ reduced the yield of the by-product sludge and lowered the SV30 ratio, and Al3+ boosted the CODCr removal. Furthermore, Fe3+ and Al3+ had a significant synergistic effect to achieve a better transmittance and a higher CODCr/SV30 ratio which revealed that more CODCr was removed, as well as less by-product sludge was generated. For a better demulsification of spent metalworking fluids, the optimum operating conditions were gathered as follows: the dosage of metal ions was 0.08 mol/L with Al3+:Fe3+ ratio was 1.5:1, the reaction pH was 6.00, the reaction time was 18.00 min and the temperature was 323.00 K. Based on this, the CODCr removal, the SV30 ratio and the transmittance and CODCr/SV30 ratio of the spent metalworking fluids were 80.21%, 40.00%, 95.20% and 128.33 mg/mL, respectively. This combined metal ion demulsification method possessed an advantageous minimization of spent metalworking fluids, which greatly benefited the automobile parts workshops in cutting down the operating cost in environmental protection.
Collapse
|
15
|
Kamzabek D, Le Dé B, Coche-Guérente L, Miomandre F, Dubacheva GV. Thermoresponsive Fluorescence Switches Based on Au@pNIPAM Nanoparticles. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:10971-10978. [PMID: 34478305 DOI: 10.1021/acs.langmuir.1c01397] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Despite numerous studies emphasizing the plasmonic impact on fluorescence, the design of a dynamic system allowing on-demand fluorescence switching in a single nanostructure remains challenging. The reversibility of fluorescence switching and the versatility of the approach, in particular its compatibility with a wide range of nanoparticles and fluorophores, are among the main experimental difficulties. In this work, we achieve reversible fluorescence switching by coupling metal nanoparticles with fluorophores through stimuli-responsive organic linkers. As a proof of concept, we link gold nanoparticles with fluorescein through thermoresponsive poly(N-isopropylacrylamide) at a tunable grafting density and characterize their size and optical response by dynamic light scattering, absorption, and fluorescence spectroscopies. We show that the fluorescence emission of these hybrid nanostructures can be switched on-demand using the thermoresponsive properties of poly(N-isopropylacrylamide). The described system presents a general strategy for the design of nanointerfaces, exhibiting reversible fluorescence switching via external control of metal nanoparticle/fluorophore distance.
Collapse
Affiliation(s)
- Dana Kamzabek
- PPSM, CNRS, Ecole Normale Supérieure Paris-Saclay, Université Paris-Saclay, 61 Avenue Président Wilson, 94235 Cachan, France
| | - Brieuc Le Dé
- PPSM, CNRS, Ecole Normale Supérieure Paris-Saclay, Université Paris-Saclay, 61 Avenue Président Wilson, 94235 Cachan, France
| | - Liliane Coche-Guérente
- Department of Molecular Chemistry, Université Grenoble Alpes, CNRS UMR 5250, 570 rue de la chimie, CS 40700, Grenoble 38000, France
| | - Fabien Miomandre
- PPSM, CNRS, Ecole Normale Supérieure Paris-Saclay, Université Paris-Saclay, 61 Avenue Président Wilson, 94235 Cachan, France
| | - Galina V Dubacheva
- PPSM, CNRS, Ecole Normale Supérieure Paris-Saclay, Université Paris-Saclay, 61 Avenue Président Wilson, 94235 Cachan, France
- Department of Molecular Chemistry, Université Grenoble Alpes, CNRS UMR 5250, 570 rue de la chimie, CS 40700, Grenoble 38000, France
| |
Collapse
|
16
|
Besford QA, Yong H, Merlitz H, Christofferson AJ, Sommer J, Uhlmann P, Fery A. FRET-Integrated Polymer Brushes for Spatially Resolved Sensing of Changes in Polymer Conformation. Angew Chem Int Ed Engl 2021; 60:16600-16606. [PMID: 33979032 PMCID: PMC8361709 DOI: 10.1002/anie.202104204] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2021] [Indexed: 12/14/2022]
Abstract
Polymer brush surfaces that alter their physical properties in response to chemical stimuli have the capacity to be used as new surface-based sensing materials. For such surfaces, detecting the polymer conformation is key to their sensing capabilities. Herein, we report on FRET-integrated ultrathin (<70 nm) polymer brush surfaces that exhibit stimuli-dependent FRET with changing brush conformation. Poly(N-isopropylacrylamide) polymers were chosen due their exceptional sensitivity to liquid mixture compositions and their ability to be assembled into well-defined polymer brushes. The brush transitions were used to optically sense changes in liquid mixture compositions with high spatial resolution (tens of micrometers), where the FRET coupling allowed for noninvasive observation of brush transitions around complex interfaces with real-time sensing of the liquid environment. Our methods have the potential to be leveraged towards greater surface-based sensing capabilities at intricate interfaces.
Collapse
Affiliation(s)
- Quinn A. Besford
- Institute of Physical Chemistry and Polymer PhysicsLeibniz-Institut für Polymerforschung e. V.Hohe Str. 601069DresdenGermany
| | - Huaisong Yong
- Institute Theory of PolymersLeibniz-Institut für Polymerforschung e. V.Hohe Str. 601069DresdenGermany
| | - Holger Merlitz
- Institute Theory of PolymersLeibniz-Institut für Polymerforschung e. V.Hohe Str. 601069DresdenGermany
| | | | - Jens‐Uwe Sommer
- Institute Theory of PolymersLeibniz-Institut für Polymerforschung e. V.Hohe Str. 601069DresdenGermany
| | - Petra Uhlmann
- Institute of Physical Chemistry and Polymer PhysicsLeibniz-Institut für Polymerforschung e. V.Hohe Str. 601069DresdenGermany
| | - Andreas Fery
- Institute of Physical Chemistry and Polymer PhysicsLeibniz-Institut für Polymerforschung e. V.Hohe Str. 601069DresdenGermany
| |
Collapse
|
17
|
Besford QA, Yong H, Merlitz H, Christofferson AJ, Sommer J, Uhlmann P, Fery A. FRET‐Integrated Polymer Brushes for Spatially Resolved Sensing of Changes in Polymer Conformation. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202104204] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Quinn A. Besford
- Institute of Physical Chemistry and Polymer Physics Leibniz-Institut für Polymerforschung e. V. Hohe Str. 6 01069 Dresden Germany
| | - Huaisong Yong
- Institute Theory of Polymers Leibniz-Institut für Polymerforschung e. V. Hohe Str. 6 01069 Dresden Germany
| | - Holger Merlitz
- Institute Theory of Polymers Leibniz-Institut für Polymerforschung e. V. Hohe Str. 6 01069 Dresden Germany
| | | | - Jens‐Uwe Sommer
- Institute Theory of Polymers Leibniz-Institut für Polymerforschung e. V. Hohe Str. 6 01069 Dresden Germany
| | - Petra Uhlmann
- Institute of Physical Chemistry and Polymer Physics Leibniz-Institut für Polymerforschung e. V. Hohe Str. 6 01069 Dresden Germany
| | - Andreas Fery
- Institute of Physical Chemistry and Polymer Physics Leibniz-Institut für Polymerforschung e. V. Hohe Str. 6 01069 Dresden Germany
| |
Collapse
|
18
|
Pimsin N, Kongsanan N, Keawprom C, Sricharoen P, Nuengmatcha P, Oh WC, Areerob Y, Chanthai S, Limchoowong N. Ultratrace Detection of Nickel(II) Ions in Water Samples Using Dimethylglyoxime-Doped GQDs as the Induced Metal Complex Nanoparticles by a Resonance Light Scattering Sensor. ACS OMEGA 2021; 6:14796-14805. [PMID: 34151061 PMCID: PMC8209797 DOI: 10.1021/acsomega.1c00190] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/12/2021] [Accepted: 05/25/2021] [Indexed: 05/08/2023]
Abstract
This study aimed to synthesize dimethylglyoxime (DMG) (N-source)-doped graphene quantum dots (N-GQDs) via simultaneous pyrolysis of citric acid and 1.0% (w/v) DMG. The maximum excitation wavelength (λmax, ex = 380 nm) of the N-GQD solution (49% quantum yield (QY)) was a red shift with respect to that of bare GQDs (λmax, ex = 365 nm) (46% QY); at the same maximum emission wavelength (λmax, em = 460 nm), their resonance light scattering (RLS) intensity peak was observed at λmax, ex/em = 530/533 nm. FTIR, X-ray photoelectron spectroscopy, XRD, energy-dispersive X-ray spectroscopy, and transmission electron microscopy analyses were performed to examine the synthesized materials. The selective and sensitive detection of Ni2+ using the RLS intensity was performed at 533 nm under the optimum conditions consisting of both 25 mg L-1 N-GQDs and 2.5 mg L-1 DMG in the ammonium buffer solution of pH 9.0. The linearity of Ni2+ was 50.0-200.0 μg L-1 with a regression line, y = 5.031x - 190.4 (r 2 = 0.9948). The limit of detection (LOD) and the limit of quantitation (LOQ) were determined to be 20.0 and 60.0 μg L-1, respectively. The method precision expressed as % RSDs was 4.90 for intraday (n = 3 × 3) and 7.65 for interday (n = 5 × 3). This developed method afforded good recoveries of Ni2+ in a range of 85-108% when spiked with real water samples. Overall, this innovative method illustrated the identification and detection of Ni2+ as a DMG complex with N-GQDs, and the detection was highly sensitive and selective.
Collapse
Affiliation(s)
- Nipaporn Pimsin
- Materials
Chemistry Research Center, Department of Chemistry and Center of Excellence
for Innovation in Chemistry, Faculty of Science, Khon Kaen University, Khon Kaen 40002, Thailand
| | - Niradchada Kongsanan
- Materials
Chemistry Research Center, Department of Chemistry and Center of Excellence
for Innovation in Chemistry, Faculty of Science, Khon Kaen University, Khon Kaen 40002, Thailand
| | - Chayanee Keawprom
- Materials
Chemistry Research Center, Department of Chemistry and Center of Excellence
for Innovation in Chemistry, Faculty of Science, Khon Kaen University, Khon Kaen 40002, Thailand
| | - Phitchan Sricharoen
- Nuclear
Technology Research and Development Center, Thailand Institute of Nuclear Technology (Public Organization), Nakhon Nayok 26120, Thailand
| | - Prawit Nuengmatcha
- Nanomaterials
Chemistry Research Unit, Department of Chemistry, Faculty of Science
and Technology, Nakhon Si Thammarat Rajabhat
University, Nakhon
Si Thammarat 80280, Thailand
| | - Won-Chun Oh
- Department
of Advanced Materials Science and Engineering, Hanseo University, Seosan, Chungnam 31962, Republic of Korea
| | - Yonrapach Areerob
- Department
of Industrial Engineering, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand
| | - Saksit Chanthai
- Materials
Chemistry Research Center, Department of Chemistry and Center of Excellence
for Innovation in Chemistry, Faculty of Science, Khon Kaen University, Khon Kaen 40002, Thailand
| | - Nunticha Limchoowong
- Department
of Chemistry, Faculty of Science, Srinakharinwirot
University, Bangkok 10110, Thailand
| |
Collapse
|
19
|
Fang Y, Furó I. Weak Anion Binding to Poly( N-isopropylacrylamide) Detected by Electrophoretic NMR. J Phys Chem B 2021; 125:3710-3716. [PMID: 33821651 PMCID: PMC8154593 DOI: 10.1021/acs.jpcb.1c00642] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/24/2021] [Revised: 03/16/2021] [Indexed: 11/28/2022]
Abstract
Ion specific effects are ubiquitous in solutions and govern a large number of colloidal phenomena. To date, a substantial and sustained effort has been directed at understanding the underlying molecular interactions. As a new approach, we address this issue by sensitive 1H NMR methods that measure the electrophoretic mobility and the self-diffusion coefficient of poly(N-isopropylacrylamide) (PNIPAM) chains in bulk aqueous solution in the presence of salts with the anion component varied from kosmotropes to chaotropes along the Hofmeister series. The accuracy of the applied electrophoretic NMR experiments is exceptionally high, on the order of 10-10 m2/(V s), corresponding to roughly 10-4 elementary charges per monomer effectively associated with the neutral polymer. We find that chaotropic anions associate to PNIPAM with an apparent Langmuir-type saturation behavior. The polymer chains remain extended upon ion association, and momentum transfer from anion to polymer is only partial which indicates weak attractive short-range forces between anion and polymer and, thereby and in contrast to some other ion-polymer systems, the lack of well-defined binding sites.
Collapse
Affiliation(s)
- Yuan Fang
- Division of Applied Physical
Chemistry, Department of Chemistry, KTH
Royal Institute of Technology, SE-10044 Stockholm, Sweden
| | - István Furó
- Division of Applied Physical
Chemistry, Department of Chemistry, KTH
Royal Institute of Technology, SE-10044 Stockholm, Sweden
| |
Collapse
|
20
|
Johnson EC, Gresham IJ, Prescott SW, Nelson A, Wanless EJ, Webber GB. The direction of influence of specific ion effects on a pH and temperature responsive copolymer brush is dependent on polymer charge. POLYMER 2021. [DOI: 10.1016/j.polymer.2020.123287] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
21
|
Li R, Cheng C, Wang Z, Gu X, Zhang C, Wang C, Liang X, Hu D. Conformational Stability of Poly (N-Isopropylacrylamide) Anchored on the Surface of Gold Nanoparticles. MATERIALS (BASEL, SWITZERLAND) 2021; 14:443. [PMID: 33477518 PMCID: PMC7831095 DOI: 10.3390/ma14020443] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/13/2020] [Revised: 01/13/2021] [Accepted: 01/14/2021] [Indexed: 12/14/2022]
Abstract
To verify the temperature sensitive failure of poly (N-isopropylacrylamide) (PNIPAM) anchored on the surface of gold nanoparticles (AuNPs), the UV-Vis spectra with temperature variations of the following aqueous solutions respectively containing AuNPs-PNIPAM, Au-PNIPAM/PNIPAM, PNIPAM, in different media (including salt, ethanol, HCl and cetyltrimethylammoniumbromide (CTAB)), were systematically determined. The results indicated that the UV-Vis spectrum of AuNPs-PNIPAM suspension hardly changed even above the Lower Critical Solution Temperature (LCST) of PNIPAM, but that of Au-PNIPAM/PNIPAM sharply increased only in absorbance intensity. A possible mechanism of the failed temperature sensitivity of PNIPAM anchored on the surface of AuNPs was proposed. Being different from free PNIPAM molecules, a strong interaction exists among PNIPAM molecules anchored on the surface of AuNPs, restraining the change in conformation of PNIPAM. The temperature sensitivity of Au-PNIPAM/PNIPAM originates from the free PNIPAM molecules rather than the anchored PNIPAM one. The changing electrostatic interaction could effectively regulate the aggregation behavior of AuNPs-PNIPAM and enhance its sensitivity to temperature.
Collapse
Affiliation(s)
- Runmei Li
- Engineering Research Center of Historical and Cultural Heritage Protection, Ministry of Education, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062, China; (R.L.); (C.C.); (Z.W.); (C.Z.); (C.W.)
| | - Cong Cheng
- Engineering Research Center of Historical and Cultural Heritage Protection, Ministry of Education, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062, China; (R.L.); (C.C.); (Z.W.); (C.Z.); (C.W.)
| | - Zhuorui Wang
- Engineering Research Center of Historical and Cultural Heritage Protection, Ministry of Education, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062, China; (R.L.); (C.C.); (Z.W.); (C.Z.); (C.W.)
| | - Xuefan Gu
- College of Chemistry and Chemical Engineering, Xi’an Shiyou University, Xi’an 710065, China;
| | - Caixia Zhang
- Engineering Research Center of Historical and Cultural Heritage Protection, Ministry of Education, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062, China; (R.L.); (C.C.); (Z.W.); (C.Z.); (C.W.)
| | - Chen Wang
- Engineering Research Center of Historical and Cultural Heritage Protection, Ministry of Education, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062, China; (R.L.); (C.C.); (Z.W.); (C.Z.); (C.W.)
| | - Xinyue Liang
- Institute of Industrial Hygiene of Ordnance Industry, Xi’an 710065, China;
| | - Daodao Hu
- Engineering Research Center of Historical and Cultural Heritage Protection, Ministry of Education, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062, China; (R.L.); (C.C.); (Z.W.); (C.Z.); (C.W.)
| |
Collapse
|
22
|
Morales-Moctezuma MD, Spain SG. The effects of cononsolvents on the synthesis of responsive particles via polymerisation-induced thermal self-assembly. Polym Chem 2021. [DOI: 10.1039/d1py00396h] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Responsive nanogels were synthesised via RAFT-mediated polymerisation-induced thermal self-assembly in cononsolvent mixtures of water and ethanol. The solvent mixture affected the particle size, tacticity and thermal properties.
Collapse
Affiliation(s)
- Marissa D. Morales-Moctezuma
- Polymer and Biomaterials Chemistry Laboratories, Department of Chemistry, University of Sheffield, Sheffield S3 7HF, UK
| | - Sebastian G. Spain
- Polymer and Biomaterials Chemistry Laboratories, Department of Chemistry, University of Sheffield, Sheffield S3 7HF, UK
| |
Collapse
|
23
|
Competitive specific ion effects in mixed salt solutions on a thermoresponsive polymer brush. J Colloid Interface Sci 2020; 586:292-304. [PMID: 33189318 DOI: 10.1016/j.jcis.2020.10.092] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/24/2020] [Revised: 10/21/2020] [Accepted: 10/22/2020] [Indexed: 11/22/2022]
Abstract
HYPOTHESIS Grafted poly(ethylene glycol) methyl ether methacrylate (POEGMA) copolymer brushes change conformation in response to temperature ('thermoresponse'). In the presence of different ions the thermoresponse of these coatings is dramatically altered. These effects are complex and poorly understood with no all-inclusive predictive theory of specific ion effects. As natural environments are composed of mixed electrolytes, it is imperative we understand the interplay of different ions for future applications. We hypothesise anion mixtures from the same end of the Hofmeister series (same-type anions) will exhibit non-additive and competitive behaviour. EXPERIMENTS The behaviour of POEGMA brushes, synthesised via surface-initiated ARGET-ATRP, in both single and mixed aqueous electrolyte solutions was characterised with ellipsometry and neutron reflectometry as a function of temperature. FINDINGS In mixed fluoride and chloride aqueous electrolytes (salting-out ions), or mixed thiocyanate and iodide aqueous electrolytes (salting-in ions), a non-monotonic concentration-dependent influence of the two anions on the thermoresponse of the brush was observed. A new term, δ, has been defined to quantitively describe synergistic or antagonistic behaviour. This study determined the specific ion effects imparted by salting-out ions are dependent on available solvent molecules, whereas the influence of salting-in ions is dependent on the interactions of the anions and polymer chains.
Collapse
|
24
|
Yuan H, Liu G. Ionic effects on synthetic polymers: from solutions to brushes and gels. SOFT MATTER 2020; 16:4087-4104. [PMID: 32292998 DOI: 10.1039/d0sm00199f] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The ionic effects on synthetic polymers have attracted extensive attention due to the crucial role of ions in the determination of the properties of synthetic polymers. This review places the focus on specific ion effects, multivalent ion effects, and ionic hydrophilicity/hydrophobicity effects in synthetic polymer systems from solutions to brushes and gels. The specific ion effects on neutral polymers are determined by both the direct and indirect specific ion-polymer interactions, whereas the ion specificities of charged polymers are mainly dominated by the specific ion-pairing interactions. The ionic cross-linking effect exerted by the multivalent ions is widely used to tune the properties of polyelectrolytes, while the reentrant behavior of polyelectrolytes in the presence of multivalent ions still remains poorly understood. The ionic hydrophilicity/hydrophobicity effects not only can be applied to make strong polyelectrolytes thermosensitive, but also can be used to prepare polymeric nano-objects and to control the wettability of polyelectrolyte brush-modified surfaces. The not well-studied ionic hydrogen bond effects are also discussed in the last section of this review.
Collapse
Affiliation(s)
- Haiyang Yuan
- Hefei National Laboratory for Physical Sciences at the Microscale, Key Laboratory of Surface and Interface Chemistry and Energy Catalysis of Anhui Higher Education Institutes, Department of Chemical Physics, University of Science and Technology of China, No. 96, Jinzhai Road, Hefei 230026, P. R. China.
| | | |
Collapse
|
25
|
Li-Yuan Zhang, Wan XJ, Shui Y, You YH, Liu YW, Ruan SQ, Su M. The Effect of Surfactants on the Properties of Colloid Precursor Li2TiO3. RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY A 2020. [DOI: 10.1134/s0036024420030176] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
26
|
van Duinen D, Butt HJ, Berger R. Two-Stage Collapse of PNIPAM Brushes: Viscoelastic Changes Revealed by an Interferometric Laser Technique. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2019; 35:15776-15783. [PMID: 31633361 PMCID: PMC6943814 DOI: 10.1021/acs.langmuir.9b03205] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/15/2019] [Revised: 10/21/2019] [Indexed: 06/10/2023]
Abstract
Many temperature-responsive polymers exhibit a single-phase transition at the lower critical solution temperature (LCST). One exception is poly(N-isopropylacryamide) (PNIPAM). PNIPAM brush layers (51 ± 3 nm thick) that are end-grafted onto glass beads collapse in two stages. The viscoelastic changes of a PNIPAM brush layers were investigated with an interferometric laser method at different temperatures. This method is able to measure the two-stage collapse of beads coated with a polymer brush layer. When these beads are situated close to a hydrophilic glass surface, they exhibit Brownian motion. As this Brownian motion changes with temperature, the collapse of the polymer layer is revealed. The characteristic spectrum of the Brownian motion of beads is modeled by a damped harmonic oscillator, where the polymer layer acts as both spring and damping elements. The change of the Brownian motion spectrum with temperature indicates two transitions of the PNIPAM brush layer, one at 36 °C and one at 46 °C. We attribute the first transition to the LCST volume collapse of PNIPAM. Here, changes of the density and viscosity of the brush dominate. The second transition is dominated by a stiffening of the brush layer.
Collapse
|
27
|
Preparation of Ni-Doped Li2TiO3 Using an Inorganic Precipitation–Peptization Method. COATINGS 2019. [DOI: 10.3390/coatings9110701] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
The precursor for a lithium-ion sieve is prepared using an inorganic precipitation-peptization method with titanium sulfate as the titanium source and lithium acetate as the lithium source. The effects of Ni2+ (Nickel ions) doping on the stability of the sol, crystal morphology and interplanar spacing of Li2TiO3 are investigated. The results indicate that, after Ni2+ doping with varying fractions, the stability of the precursor sol first increases then decreases, and the maximum stabilization time of the precursor sol doped with 1% Ni2+ is 87 h. When doped with 1% Ni2+, the sol performance is most stable, the porous Li2TiO3 is obtained, and the specific surface area of Li2TiO3 increases by up to 1.349 m2/g from 0.911 m2/g. Accompanying the increase in calcination temperature, the inhibition of Ni2+ doping on the growth and crystallization of grains decreases. When the temperature is lower than 750 °C, Ni atoms replace the Ti atoms that are substituted for Li atoms in the original pure Li layer, forming lattice defects, resulting in the disappearance of (002) and (−131) diffraction peaks for Li2TiO3, the reduced ordering of crystal structure, a decrease in the interplanar spacing of the (002) plane, lattice expansion and an increase in the particle size to 100–200 nm. When the temperature exceeds 750 °C, with the increase of calcination temperature, the influence of Ni doping on the growth and crystallinity of grains decreases, and the (002) crystal surface starts to grow again.
Collapse
|
28
|
Humphreys BA, Johnson EC, Wanless EJ, Webber GB. Poly( N-isopropylacrylamide) Response to Salt Concentration and Anion Identity: A Brush-on-Brush Study. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2019; 35:10818-10830. [PMID: 31339320 DOI: 10.1021/acs.langmuir.9b00695] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
The stability of poly(N-isopropylacrylamide) (PNIPAM) brush-modified colloidal silica particles was compared to asymmetric and symmetric PNIPAM brush direct force measurements in the presence of 1, 10, and 500 mM aqueous salt solution of KCl, KNO3, and KSCN between 10 and 45 °C. Dynamic light scattering measurements highlighted subtle variations in the salt-mediated thermoresponse, while atomic force microscopy (AFM) force curves between a bare silica or PNIPAM brush-modified colloid probe and a planar PNIPAM brush elucidated differences in brush interactions. The AFM force curves in the presence of KCl primarily revealed steric interactions between the surfaces, while KNO3 and KSCN solutions exhibited electrosteric interactions on approach as a function of the chaotropic nature of the ion and the solution concentration. The symmetric PNIPAM brush interaction highlighted significant variations between KCl and KSCN at 1 and 500 mM concentrations, while the approach and retraction force curves were relatively similar at 10 mM concentration. The combination of these techniques enabled the stability of PNIPAM brush-modified colloidal dispersions in the presence of electrolyte to be better understood with specific ion binding and the solution Debye length playing a significant role.
Collapse
Affiliation(s)
- Ben A Humphreys
- Priority Research Centre for Advanced Particle Processing and Transport , University of Newcastle , Callaghan , NSW 2308 , Australia
| | - Edwin C Johnson
- Priority Research Centre for Advanced Particle Processing and Transport , University of Newcastle , Callaghan , NSW 2308 , Australia
| | - Erica J Wanless
- Priority Research Centre for Advanced Particle Processing and Transport , University of Newcastle , Callaghan , NSW 2308 , Australia
| | - Grant B Webber
- Priority Research Centre for Advanced Particle Processing and Transport , University of Newcastle , Callaghan , NSW 2308 , Australia
| |
Collapse
|
29
|
The Hofmeister series: Specific ion effects in aqueous polymer solutions. J Colloid Interface Sci 2019; 555:615-635. [PMID: 31408761 DOI: 10.1016/j.jcis.2019.07.067] [Citation(s) in RCA: 78] [Impact Index Per Article: 15.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/13/2019] [Revised: 07/23/2019] [Accepted: 07/24/2019] [Indexed: 12/21/2022]
Abstract
Specific ion effects in aqueous polymer solutions have been under active investigation over the past few decades. The current state-of-the-art research is primarily focused on the understanding of the mechanisms through which ions interact with macromolecules and affect their solution stability. Hence, we herein first present the current opinion on the sources of ion-specific effects and review the relevant studies. This includes a summary of the molecular mechanisms through which ions can interact with polymers, quantification of the affinity of ions for the polymer surface, a thermodynamic description of the effects of salts on polymer stability, as well as a discussion on the different forces that contribute to ion-polymer interplay. Finally, we also highlight future research issues that call for further scrutiny. These include fundamental questions on the mechanisms of ion-specific effects and their correlation with polymer properties as well as a discussion on the specific ion effects in more complex systems such as mixed electrolyte solutions.
Collapse
|
30
|
Gregory KP, Webber GB, Wanless EJ, Page AJ. Lewis Strength Determines Specific-Ion Effects in Aqueous and Nonaqueous Solvents. J Phys Chem A 2019; 123:6420-6429. [DOI: 10.1021/acs.jpca.9b04004] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Kasimir P. Gregory
- School of Environmental and Life Sciences, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Grant B. Webber
- School of Engineering, The University of Newcastle, Callaghan, New South Wales 2308, Australia
- Priority Research Centre for Advanced Particle Processing and Transport, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Erica J. Wanless
- School of Environmental and Life Sciences, The University of Newcastle, Callaghan, New South Wales 2308, Australia
- Priority Research Centre for Advanced Particle Processing and Transport, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Alister J. Page
- School of Environmental and Life Sciences, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| |
Collapse
|
31
|
Giussi JM, Cortez ML, Marmisollé WA, Azzaroni O. Practical use of polymer brushes in sustainable energy applications: interfacial nanoarchitectonics for high-efficiency devices. Chem Soc Rev 2019; 48:814-849. [PMID: 30543263 DOI: 10.1039/c8cs00705e] [Citation(s) in RCA: 80] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Abstract
The discovery and development of novel approaches, materials and manufacturing processes in the field of energy are compelling increasing recognition as a major challenge for contemporary societies. The performance and lifetime of energy devices are critically dependent on nanoscale interfacial phenomena. From the viewpoint of materials design, the improvement of current technologies inevitably relies on gaining control over the complex interface between dissimilar materials. In this sense, interfacial nanoarchitectonics with polymer brushes has seen growing interest due to its potential to overcome many of the limitations of energy storage and conversion devices. Polymer brushes offer a broad variety of resources to manipulate interfacial properties and gain molecular control over the synergistic combination of materials. Many recent examples show that the rational integration of polymer brushes in hybrid nanoarchitectures greatly improves the performance of energy devices in terms of power density, lifetime and stability. Seen in this light, polymer brushes provide a new perspective from which to consider the development of hybrid materials and devices with improved functionalities. The aim of this review is therefore to focus on what polymer brush-based solutions can offer and to show how the practical use of surface-grafted polymer layers can improve the performance and efficiency of fuel cells, lithium-ion batteries, organic radical batteries, supercapacitors, photoelectrochemical cells and photovoltaic devices.
Collapse
Affiliation(s)
- Juan M Giussi
- Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), Departamento de Química, Facultad de Ciencias Exactas, Universidad Nacional de La Plata, CONICET, Diagonal 113 y 64 (1900), La Plata, Argentina.
| | | | | | | |
Collapse
|
32
|
Goh K, Li H, Lam K. Effects of salt- and oxygen-coupled stimuli on the reactive behaviors of hemoglobin-loaded polymeric membranes. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2018.11.139] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
33
|
Humphreys BA, Prescott SW, Murdoch TJ, Nelson A, Gilbert EP, Webber GB, Wanless EJ. Influence of molecular weight on PNIPAM brush modified colloidal silica particles. SOFT MATTER 2018; 15:55-64. [PMID: 30534695 DOI: 10.1039/c8sm01824c] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
The effect of molecular weight and temperature on the phase transition and internal structure of poly(N-isopropylacrylamide) brush modified colloidal silica particles was investigated using dynamic light scattering (DLS) and small angle neutron scattering (SANS) between 15 and 45 °C. Dry particle analysis utilising transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) all confirmed the thickness of the polymer brush shell increased as a function of polymerisation time. Hydrodynamic diameter and electrophoretic mobility results revealed that the brush modified particles transitioned from swollen shells to a collapsed conformation between 15 and 35 °C. The dispersions were electrosterically stabilised over the entire temperature range investigated, with minimal thermal hysteresis recorded. Modelling of the hydrodynamic diameter enabled the calculation of a lower critical solution temperature (LCST) which increased as a function of brush thickness. The internal structure determined via SANS showed a swollen brush at low temperatures (18 and 25 °C) which decayed radially away from the substrate, while a collapsed block-like conformation with 60% polymer volume fraction was present at 40 °C. Radial phase separation was evident at intermediate temperatures (30 and 32.5 °C) with the lower molecular weight sample having a greater volume fraction of polymer in the dense inner region at these temperatures.
Collapse
Affiliation(s)
- Ben A Humphreys
- Priority Research Centre for Advanced Particle Processing and Transport, University of Newcastle, Callaghan, NSW 2308, Australia.
| | | | - Timothy J Murdoch
- Priority Research Centre for Advanced Particle Processing and Transport, University of Newcastle, Callaghan, NSW 2308, Australia.
| | - Andrew Nelson
- Australian Centre for Neutron Scattering, ANSTO, Lucas Heights, NSW 2234, Australia
| | - Elliot P Gilbert
- Australian Centre for Neutron Scattering, ANSTO, Lucas Heights, NSW 2234, Australia
| | - Grant B Webber
- Priority Research Centre for Advanced Particle Processing and Transport, University of Newcastle, Callaghan, NSW 2308, Australia.
| | - Erica J Wanless
- Priority Research Centre for Advanced Particle Processing and Transport, University of Newcastle, Callaghan, NSW 2308, Australia.
| |
Collapse
|
34
|
Murdoch TJ, Humphreys BA, Johnson EC, Webber GB, Wanless EJ. Specific ion effects on thermoresponsive polymer brushes: Comparison to other architectures. J Colloid Interface Sci 2018; 526:429-450. [DOI: 10.1016/j.jcis.2018.04.086] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2018] [Revised: 04/20/2018] [Accepted: 04/23/2018] [Indexed: 02/06/2023]
|