In situ growth of Ag-SnO2 quantum dots on silver phosphate for photocatalytic degradation of carbamazepine: Performance, mechanism and intermediates toxicity assessment

Photocatalytic Removal of Metronidazole Antibiotics from Water Using Novel Ag-N-SnO2 Nanohybrid Material

In this study, we employed a straightforward synthetic approach using the sol-gel method to fabricate a novel photocatalyst, Ag and N co-doped SnO2 (Ag-N-SnO2). The synthesized photocatalysts underwent characterization through various techniques including XRD, FTIR, FESEM-EDS, TEM, UV-vis DRS, BET, and XPS. The UV-vis DRS results confirmed a reduction in the bandgap energy of Ag-N-SnO2, leading to enhanced absorption of visible light. Additionally, TEM data demonstrated a smaller particle size for Ag-N-SnO2, and BET analysis revealed a significant increase in surface area compared to SnO2.The efficiency of the Ag-N-SnO2 photocatalyst in degrading metronidazole (MNZ) under natural sunlight surpassed that of SnO2. Under optimal conditions (Ag-N-SnO2 concentration of 0.4 g/L, MNZ concentration of 10 mg/L, pH 9, and 120 min of operation), the highest MNZ photocatalytic removal reached 97.03%. The reaction kinetics followed pseudo-first-order kinetics with a rate constant of 0.026 min-1. Investigation into the mineralization of MNZ indicated a substantial decrease in total organic carbon (TOC) values, reaching around 56% in 3 h of sunlight exposure. To elucidate the photocatalytic degradation mechanism of MNZ with Ag-N-SnO2, a scavenger test was employed which revealed the dominant role of •O2-. The results demonstrated the reusability of Ag-N-SnO2 for up to four cycles, highlighting its cost-effectiveness and environmental friendliness as a photocatalyst.

Fabrication of water-floating litchi-like polystyrene-sphere-supported TiO2/Bi2O3 S-scheme heterojunction for efficient photocatalytic degradation of tetracycline

The exploration of advanced photocatalysts for antibiotic degradation is critical, but it remains a challenge due to the lack of rational structural design and in-depth insights into molecular oxygen activation. Water-floating photocatalysts could be one of the best choices owing to their technical features in terms of reasonability and efficiency involving a high oxygenation of photocatalyst surface, fully solar irradiation, and simple recycling and reuse. Herein, a floatable litchi-like architecture of a polystyrene-sphere-supported TiO2/Bi2O3 (PS@TiO2/Bi2O3) S-scheme heterojunction was skillfully constructed and evaluated for photodegradation of model tetracycline (TC) antibiotics. By integrating the advantages of floatability and S-scheme, the TC removal rate of the optimal PS@TiO2/Bi2O3-0.4 catalyst can reach 88.4% under 1 h illumination, which is higher than that of pristine Bi2O3 (60.8%) and PS@TiO2 (40.1%). Moreover, PS@TiO2/Bi2O3-0.4 exhibits high recyclability and stability, and there is no significant loss of activity after five cycles of repeated use. With the aid of liquid chromatography-mass spectrometry analysis and density functional theory calculations, a reasonable degradation pathway for TC was proposed. The present work provides a recyclable and efficient approach for the photodegradation of TC, expecting to guide the innovative exploitation of other environmental systems.

Highly flame-retardant materials of different divalent metal ions alginate/silver phosphate: Synthesis, characterizations, and synergistic phosphorus-polymetallic effects

Three kinds of divalent metal ions (Ca2+, Cu2+, Zn2+) alginate/silver phosphate (MAlg/Ag3PO4) hybrid materials were prepared via an in-situ method, and the composites were characterized by X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Fourier transform infrared spectrum (FTIR). To investigate their flame-retardant properties and phosphorus-polymetallic flame-retardant effects, the combustion behavior and flammability of the composites were assessed by using the thermogravimetric analysis (TGA), limiting oxygen index (LOI) and micro-calorimeter tests (MCC). The results show that the three composites were thermally stable, among which the LOI of CaAlg/Ag3PO4, CuAlg/Ag3PO4 and ZnAlg/Ag3PO4 were 62.6 %, 46.5 % and 79.8 %, respectively, which were much higher than the prescribed flame retardants which was 27 %. According to the TGA, the thermal stability was ZnAlg/Ag3PO4 > CaAlg/Ag3PO4 > CuAlg/Ag3PO4. The heat release capacity (HRC) of the above three materials was 49 J/(g·K), 69 J/(g·K), 41 J/(g·K), respectively, and the fire safety performance was also in the same order as the thermal stability. By using the thermogravimetric analysis coupled with Fourier transform infrared analysis (TG-FTIR) and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS), the flame retarding mechanism of MAlg/Ag3PO4 and the synergistic effect of Ag3PO4 and divalent metal ions were proposed based on the experimental data.

An update on the biological effects of quantum dots: From environmental fate to risk assessment based on multiple biological models

Quantum dots (QDs) are zero-dimension nanomaterials with excellent physical and chemical properties, which have been widely used in environmental science and biomedicine. Therefore, QDs are potential to cause toxicity to the environment and enter organisms through migration and bioenrichment effects. This review aims to provide a comprehensive and systematic analysis on the adverse effects of QDs in different organisms based on recently available data. Following PRISMA guidelines, this study searched PubMed database according to the pre-set keywords, and included 206 studies according to the inclusion and elimination criteria. CiteSpace software was firstly used to analyze the keywords of included literatures, search for breaking points of former studies, and summarize the classification, characterization and dosage of QDs. The environment fate of QDs in the ecosystems were then analyzed, followed with comprehensively summarized toxicity outcomes at individual, system, cell, subcellular and molecular levels. After migration and degradation in the environment, aquatic plants, bacteria, fungi as well as invertebrates and vertebrates have been found to be suffered from toxic effects caused by QDs. Aside from systemic effects, toxicity of intrinsic QDs targeting to specific organs, including respiratory system, cardiovascular system, hepatorenal system, nervous system and immune system were confirmed in multiple animal models. Moreover, QDs could be taken up by cells and disturb the organelles, which resulted in cellular inflammation and cell death, including autophagy, apoptosis, necrosis, pyroptosis and ferroptosis. Recently, several innovative technologies, like organoids have been applied in the risk assessment of QDs to promote the surgical interventions of preventing QDs' toxicity. This review not only aimed at updating the research progress on the biological effects of QDs from environmental fate to risk assessment, but also overcame the limitations of available reviews on basic toxicity of nanomaterials by interdisciplinarity and provided new insights for better applications of QDs.

Kinetic Effects of Ciprofloxacin, Carbamazepine, and Bisphenol on Biomass in Membrane Bioreactor System at Low Temperatures to Treat Urban Wastewater

This study analysed the kinetic results in the presence and absence of micropollutants (bisphenol A, carbamazepine, ciprofloxacin, and the mixture of the three compounds) obtained with respirometric tests with mixed liquor and heterotrophic biomass in a membrane bioreactor (MBR) working for two different hydraulic retention times (12-18 h) and under low-temperature conditions (5-8 °C). Independently of the temperature, the organic substrate was biodegraded faster over a longer hydraulic retention time (HRT) with similar doping, which was probably due to the longer contact time between the substrate and microorganisms within the bioreactor. However, low values of temperature negatively affected the net heterotrophic biomass growth rate, with reductions from 35.03 to 43.66% in phase 1 (12 h HRT) and from 37.18 to 42.77% in phase 2 (18 h HRT). The combined effect of the pharmaceuticals did not worsen the biomass yield compared with the effects caused individually.

Mechanistic insights into UV photolysis of carbamazepine and caffeine: Active species, reaction sites, and toxicity evolution

The pseudo-persistence of pharmaceutical and personal care products (PPCPs)in the aqueous environment may pose potential risks to human health and ecosystems. The UV disinfection in wastewater treatment plants is one of the essential processes before PPCPs enter the water environment, so it is crucial to elucidate the photolytic behavior and mechanism of PPCPs under UV radiation. In this work, carbamazepine (CBZ) and caffeine (CAF) were selected as typical pollutants to investigate the effect of water matrixes, humic acid, inorganic ions, and pH on the UV radiation performance. Hydroxyl radical (•OH) and singlet oxygen (¹O₂) were identified by quenching experiments and electron paramagnetic resonance (EPR) spectra as playing a dominant role in the degradation process. UPLC-TOF/MS was conducted to identify 13 and 14 possible intermediates of CBZ and CAF, respectively. Moreover, combining density functional theory (DFT) calculations (Frontier Molecular Orbital and Fukui index), hydroxylation, oxidation, and ring cleavage were proposed as the main degradation pathways of the contaminants, which occurred first at the C(7C), N(17 N) and O(18O) sites of CBZ and at the C(9C) site of CAF. The bio-acute toxicity experiment and the Ecological Structure-Activity Relationships (ECOSAR) program were performed to analyze and predict the toxicity of the intermediates of CBZ and CAF under UV radiation, respectively. The results showed that the acute toxicity of both solutions increased after UV radiation and followed with the combined toxicity. This work has great scientific value and practical environmental significance for evaluating the UV disinfection process and managing PPCPs in the aqueous environment.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

Fabrication of Ag3PO4/polyaniline-activated biochar photocatalyst for efficient triclosan degradation process and toxicity assessment

Triclosan (TCS) is a typical environmental pollutant, which seriously threatens the health of humans and organisms. A novel strategy of biochar/Ag₃PO₄/polyaniline (PANI) composite photocatalyst was synthesized by a facile chemical precipitation method to efficiently degrade TCS. XRD, Raman, ESR, etc. were used to reveal the effective associations among physiochemistry, photochemistry and photocatalytic properties of the composite. It was proved the synergistic effects of biochar (T-Bio) and PANI resulted in the decrease of Ag₃PO₄ particle size, the enhancement of adsorption, the improvement of light utilization, the increase of photogenerated carrier separation and the promotion of reactive species. The photocatalytic mechanism showed h⁺ was the main active species, O₂^- and OH played minor roles. Under the irradiation of visible light, the optimal photocatalyst (1.0% T-Bio/AP/1.0% PANI) displayed excellent photocatalytic activity with the removal rate of 85.21% for TCS within 10 min, and the apparent rate constant K' was 2.38 times of Ag₃PO₄. 11 main intermediates for TCS degradation were identified, and their toxicity was significantly reduced. The possible degradation pathways were proposed. This work is the first systematic study on the degradation behavior of TCS by Ag₃PO₄-based photocatalyst, and it provides a new approach to fabricate photocatalysts with synergistic effects and amazing photocatalytic activity by biochar.

Ba substituted SrTiO3 induced lattice deformation for enhanced piezocatalytic removal of carbamazepine from water

Removal of pharmaceuticals and personal care products (PPCPs) from water by mechanical energy-driven piezocatalysis is a promising technology for environmental remediation that highly depends on the design of efficient piezocatalyst. In this study, Ba-substituted SrTiO₃ piezoelectric materials were constructed and used for piezocatalytic degradation of carbamazepine (CBZ) from water. The Ba_0.5Sr_0.5TiO₃ (BSTO-2) achieved the optimal performance, exhibiting 94.5% removal efficiency for CBZ (10 mg/L) after 30 min in the presence of BSTO-2 (0.5 g/L) and ultrasonic vibration (40 kHz, 100 W) with the minimal energy consumption. The kinetic rate constant was up to 0.106 min^-1, which were 1.86 and 2.08 times as high as that of pure SrTiO₃ and BaTiO₃, respectively. The enhanced piezocatalytic activity was attributed to its distorted structure and modified conductivity, resulting in a higher piezoelectric response and faster interfacial charge transfer. The involved reactive species, the effects of operational condition (catalyst dosage, CBZ concentration, solution pH, anions, water matrices and different pollutants), and the possible degradation products and their toxicity were discussed in detail. The work is of great significance to develop highly efficient piezocatalysts and highlights the potential of piezocatalysis in water remediation.

Recent progress in transition metal oxide/sulfide quantum dots-based nanocomposites for the removal of toxic organic pollutants

Water is an essential solvent that is extremely necessary for the survival of life. Water pollution due to the increased utilization of water for various processes, including domestic and industrial activities, poses a special threat that contaminates both surface and ground water. In recent years, advanced oxidation processes (AOPs) have been applied to deal with wastewater problems, which is a green method used to oxidize organic contaminants with strong oxidative radical species. Among the AOPs, photocatalytic technology is one of the most promising strategies for wastewater cleaning, which fulfills the aims of environmentally friendly and sustainable development. Owing to their unique electronic, optical, and structural properties, nanoscale semiconductors have received substantial interest as materials for AOPs, particularly inspired by their superb quantum confinement effects and large surface-area-to-volume ratio, which are essential for catalytic reaction kinetics. Recent advancements have revealed that semiconductor nanocrystals, known as quantum dots (QDs), are newly emerging zero-dimensional (0-D) nanomaterials, which have garnered much attention owing to their special physiochemical characteristics such as high conductivity, thermo-chemical and opto-mechanical stability, high adsorption coefficients, and, most importantly, their admirable recyclability. In this review, we provide a clear understanding of the importance of semiconductor QD-based nanocomposites in the degradation of organic pollutants, in addition to the mechanism involved in the reaction process. Following this, the enhancement of different materials, such as metal oxides and metal sulfide QD-based nanocomposites, is discussed in the context of combating environmental pollution.

Efficient photocatalytic destruction of recalcitrant micropollutants using graphitic carbon nitride under simulated sunlight irradiation

The ubiquity of micropollutants (MPs) in aquatic environments has attracted increasing concern for public health and ecological security. Compared to conventional biological treatment, photocatalytic processes show more efficiency in degrading MPs, but they require expensive materials and complicated synthesis processes. This study developed an economic photocatalytic process to degrade micropollutants. We synthesized urea-based graphitic carbon nitride (g-C₃N₄) by a facile one-step pyrolysis method and evaluated the photocatalytic efficiency of carbamazepine (CBZ). Under simulated solar irradiation, g-C₃N₄ could achieve 100% removal efficiency of 0.1 mg/L CBZ in spiked wastewater effluent within 15 min, and 86.5% removal efficiency in wastewater influent after 20 min of irradiation. The porous structure of g-C₃N₄ promoted effective charge separation and mass transport of CBZ near the catalyst surface, enabling a high kinetic rate (0.3662 min ^-1). Reactive oxygen species trapping experiments revealed that superoxide radicals (O₂ ^•-) and holes (h⁺) were the major active radicals. Electron paramagnetic resonance (EPR) further confirmed the presence of O₂ ^•-, ^• OH, ¹O₂ and holes. The pH, light intensity and initial CBZ concentration were found to have significant impacts on the removal efficiency of CBZ. Possible reaction intermediates were identified and the degradation pathway was proposed. Multiple MPs were selected to further demonstrate photocatalytic efficiency of g-C₃N₄. The facile synthesis, superior efficiency, and versatility of g-C₃N₄ make it a promising catalyst for application in tertiary wastewater treatment processes.

Development of oxygen vacancies enriched CoAl hydroxide@hydroxysulfide hollow flowers for peroxymonosulfate activation: A highly efficient singlet oxygen-dominated oxidation process for sulfamethoxazole degradation

In this study, oxygen vacancies enriched cobalt aluminum hydroxide@hydroxysulfide (CoAl-LDH@CoS_x) hollow flowers was synthesized by in-situ etching of CoAl-LDH using sodium sulfide solution. The analysis of SEM, EDS, XRD, and XPS were used to characterize the samples. The as-synthesized 0.2CoAl-LDH@CoS_x displayed higher catalysis performance of sulfamethoxazole (SMX) degradation via the activation of PMS than the pristine CoAl-LDH. 98.5 % of SMX (40 μM) was eliminated with 0.1 g/L 0.2CoAl-LDH@CoS_x and 0.3 mM PMS at pH 6.0 in 4 min. The degradation fitted with the pseudo-first-order reaction kinetics well with rate constant of 0.89 min^-1 for 0.2CoAl-LDH@CoS_x/PMS system and 0.55 min^-1 for CoAl-LDH/PMS system. Singlet oxygen (¹O₂) was verified as dominant reactive oxygen species responsible for SMX degradation via quenching tests. Mechanism investigation suggested that the oxygen vacancies, redox cycles of Co(II)/Co(III) and S₂^2-/(S^2- and sulfate species) on the surface of 0.2CoAl-LDH@CoS_x were crucial for PMS activation. In addition, the plausible degradation pathways of SMX were proposed by analysis of the SMX degradation intermediates. This study not only reveals that 0.2CoAl-LDH@CoS_x is an efficient catalyst to activate PMS for SMX degradation, but also shed a novel insight into development of heterogeneous catalysts with oxygen vacancies.

Agro-waste extracted cellulose supported silver phosphate nanostructures as a green photocatalyst for improved photodegradation of RhB dye and industrial fertilizer effluents

The efficiency and reusability of photocatalysts are the dominant factors for their pragmatic use. The visible light induced semiconductor silver phosphate is a superior photocatalyst effective under visible light but its stability is still an undiscussed issue. To overcome this stability issue in this present manuscript, eco-friendly agro-waste extracted cellulose supported silver phosphate nanostructures have been designed for the first time through a simple chemical process. At first, silver phosphate nanostructures were synthesized by the co-precipitation method. Then, different weights of cellulose were added to the silver nitrate solution to form cellulose supported silver phosphate nanostructures. The photodegradation efficiency for each weight ratio was examined in which the photocatalyst Ag-8 nanostructures showed a high rate (0.024 min^-1) for degradation of Rhodamine B (RhB) using a low intensity tungsten bulb. Real sample analysis has also been carried out using this photocatalyst for the degradation of industrial fertilizer effluents. The degradation rate of all the nanostructures was found to be high in comparison to pristine silver phosphate as well as the extracted bare cellulose. The photocatalytic activity is enhanced because of the participation of cellulose as a support which makes an interface for silver phosphate and assists it in delaying the charge recombination period under visible light. To understand the photochemical reaction of electrons and holes, scavenger studies were also performed.

Bioactive silver phosphate/polyindole nanocomposites

Materials capable of releasing reactive oxygen species (ROS) can display antibacterial and anticancer activity, and may also have anti-oxidant capacity if they suppress intracellular ROS (e.g. nitric oxide, NO) resulting in anti-inflammatory activity. Herein we report silver phosphate (Ag₃PO₄)/polyindole (Pln) nanocomposites which display antibacterial, anticancer and anti-inflammatory activity, and have therefore potential for a variety of biomedical applications.

Materials capable of releasing reactive oxygen species (ROS) can display antibacterial and anticancer activity, and may also have antioxidant capacity if they suppress intracellular ROS (e.g. nitric oxide, NO) resulting in anti-inflammatory activity.

Research on the mechanism and reaction conditions of electrochemical preparation of persulfate in a split-cell reactor using BDD anode

Through a cyclic voltammetry (CV) curve, electron spin resonance spectroscopy (ESR) characterization and a free radical competitive trapping experiment, an analysis was performed on the mechanism of persulfate (PDS) electro-synthesis by sulfate at a boron-doped diamond (BDD) anode. It had been found that there were two pathways of PDS formation. The first was to form PDS through the interaction of sulfate radicals, which were generated from the oxidation reaction mediated by hydroxyl radicals, where the protonized bisulfate ions and sulfuric acid were oxidized by hydroxyl radicals to sulfate radicals. The second was to produce PDS by generating sulfate radicals through the direct loss of electrons from sulfate and bisulfate ions on the electrode surface. In addition, the effects of initial pH, temperature, current density and electrolyte concentration on the synthesis of PDS were investigated in the slotted anode cycle electrolysis mode. As indicated by the results, despite the small effect of the initial pH on PDS synthesis, acidic pH was slightly beneficial to the synthesis of PDS; in electrolysis, the temperature should be controlled below the thermal decomposition temperature of PDS; and in practical application, the increase of impressed current or voltage contributed little to the increase of PDS synthesis concentration and current efficiency. In the case of the impressed current exceeding the limiting current, the adoption of concentrated electrolyte solution shall improve the PDS output and current efficiency.

Through cyclic voltammetry (CV) curve, electron spin resonance spectroscopy (ESR) characterization and free radical competitive trapping experiment, an analysis was performed on the mechanism of persulfate (PDS) electro-synthesis by sulfate at boron-doped diamond (BDD) anode.

Morphology-controlled Fabrication of SnO2 /ZnO Nanocomposites with Enhanced Photocatalytic Performance

In this work, a series of novel SnO₂ /ZnO nanocomposites with different morphologies were fabricated via a facile hydrothermal technique followed by calcination in air. The morphological, structural and photocatalytic properties of the SnO₂ /ZnO nanocomposites were studied using different methods. The results showed that the synthesized nanocomposites possessed crystal phases of wurtzite hexagonal phase ZnO and tetragonal rutile phase SnO₂ . In addition, the morphologies of SnO₂ /ZnO nanocomposites strongly depended on the molar ratios of Sn and Zn. Compared with ZnO and SnO₂ , the SnO₂ /ZnO nanocomposites exhibited considerably higher degradation efficiency for the photodegradation of methylene blue and quinolone antibiotics under mercury lamp irradiation. The SZ-2 nanospheres exhibited the highest degradation efficiency of 95.81%, which was about 2.63 times higher than that of ZnO nanoparticles. Moreover, the trapping experiments confirmed that ˙OH played the dominant role in MB degradation. Finally, the charge carriers potential transfer pathway and photocatalytic degradation mechanism were put forward. This study provides an economical way to prepare hybrid nanocomposites with controlled morphology for practical applications in the photocatalytic degradation of organic dyes and residual antibiotics.