In-situ deposition of gold nanoparticles onto polydopamine-decorated g-C3N4 for highly efficient reduction of nitroaromatics in environmental water purification

Silver decorated zeolite embedded in bionanocomposite hydrogels based on cross-linked carboxymethyl cellulose for excellent catalytic hydrogenation of azo dyes

Herein, bionanocomposite beads based on Carboxymethyl cellulose/Dextrant sulfate (CMC/DS) embedding silver nanoparticle-functionalized zeolite (AgZ) were developed and proposed as catalysts for catalytic hydrogenation of Direct Red 16 (DR16) azo dye under different experimental parameters. The obtained results showed that AgZ incorporation into the polymer matrix produced highly porous structures with improved thermal stability. For antibacterial application, it was shown that the engineered bionanocomposites were effective against all tested bacteria. The CMC-DS-AgZ catalysts showed good catalytic performances for the hydrogenation of DR16 in various real-life water samples and even in presence of several mineral salts, however with a high efficiency (99 %) obtained for the catalyst prepared at elevated AgZ content (with a kapp rate constant of 0.239 min-1). Moreover, the hydrogenation study of various azo dyes highlighted the satisfactory application potential of the catalysts and their versatility. The catalyst beads showed good recyclability for five successive cycles without any significant loss of efficiency or stability. The proposed mechanism for DR16 catalytic hydrogenation on C3-D1-AgZ revealed that AgZ could enhance the catalytic activity of the beads by facilitating the formation of AgH intermediates. Finally, the green synthesized materials were shown to be viable and potential candidates for the purification of environmental media.

Advances in MXene-based technologies for the remediation of toxic phenols: A comprehensive review

The pressing global issue of organic pollutants, particularly phenolic compounds derived primarily from industrial wastes, poses a significant threat to the environment. Although progress has been made in the development of low-cost materials for phenolic compound removal, their effectiveness remains limited. Thus, there is an urgent need for novel technologies to comprehensively address this issue. In this context, MXenes, known for their exceptional physicochemical properties, have emerged as highly promising candidates for the remediation of phenolic pollutants. This review aims to provide a comprehensive and critical evaluation of MXene-based technologies for the removal of phenolic pollutants, focusing on the following key aspects: (1) The classification and categorization of phenolic pollutants, highlighting their adverse environmental impacts, and emphasizing the crucial need for their removal. (2) An in-depth discussion on the synthesis methods and properties of MXene-based composites, emphasizing their suitability for environmental remediation. (3) A detailed analysis of MXene-based adsorption, catalysis, photocatalysis, and hybrid processes, showcasing current advancements in MXene modification and functionalization to enhance removal efficiency. (4) A thorough examination of the removal mechanisms and stability of MXene-based technologies, elucidating their operating conditions and stability in pollutant removal scenarios. (5) Finally, this review concludes by outlining future challenges and opportunities for MXene-based technologies in water treatment, facilitating their potential applications. This comprehensive review provides valuable insights and innovative ideas for the development of versatile MXene-based technologies tailored to combat water pollution effectively.

Impacting the Surface Chemistry of NiAu by Immobilizing on MgO/N-Rich Nanoporous Carbon Heterostructures for Boosting Catalytic Activities

Tuning the physical and chemical interaction between metal-metal' (M-M') and metal-support is an ideal way to realize enhanced catalytic activity of metal nanoparticles (NPs). As a proof of concept, herein we report the fabrication of nickel-gold (Ni-Au) alloy nanoparticles attached to N-doped nanoporous carbon (NPC) intervened with MgO (Ni73Au27@MgO-NPC), achieved through the impregnation of metal precursors into Schiff-base network polymer (SNP) framework along with Mg(OH)2 and pyrolysis at 800 °C in N2 atmosphere. With high stability and heterogeneity, the nickel rich Ni73Au27@MgO-NPC exhibited higher catalytic activities with turnover frequencies of 29,272 h-1 (hydrogenation of p-nitrophenol), 93,843 h-1 (degradation of methyl orange), and 2,218 h-1 (epoxidation of stilbene), compared to commercial 10 wt % Pd/C. Enhanced catalytic activity is correlated to the synchronized electron density enhancement in Au, by Ni and MgO/N-rich nanoporous carbon heterostructures, as evident from detailed X-ray photoelectron spectroscopic studies.

Light harvesting enhancement through band structure engineering in graphite carbon nitride / polydopamine nanocomposite photocatalyst: Addressing persistent organophosphorus pesticide pollution in water systems

Organophosphorus pesticides, particularly profenofos (PF), pose a significant threat to the food supply and human health due to their persistence, toxicity, and resistance to natural breakdown processes. An urgent need exists for an environmentally friendly solution, and photocatalysis emerges as a practical, cost-effective option. However, challenges like poor light responsiveness and difficulties in material separation and reusability persist. To address these issues, we developed a nanocomposite consisting of graphite carbon nitride (g-C3N4) doped with polydopamine (pDA) through a hydrothermal synthesis method. This innovative nanocomposite was employed as a photocatalyst to degrade PF. Various analytical techniques, including UV-DRS, FT-IR, XRD, HR-TEM, and EDAX, were utilized to characterize the synthesized nanocomposite. The strategically modulated band gaps of the nanocomposite enable efficient absorption of UV light, facilitating the robust photocatalytic degradation of PF (96.4%). Our study explored photodegradation using different g-C3N4/pDA catalyst dosages, varied PF concentrations, and pH levels (3, 5, 9, and 11) under UV light. Our findings promise applications in wastewater management, offering an efficient catalyst for PF degradation. This marks a significant stride in addressing challenges related to pesticide pollution in the environment.

Alkoxysilane-Mediated Decoration of Si Nanowires Vertical Arrays with Au Nanoparticles as Improved SERS-Active Platforms

The search for improved transducers to fabricate better-performing (bio)sensors is a challenging but rewarding endeavor aiming to better diagnose and treat diseases. In this paper, we report on the decoration of a dense vertical array of ultrathin silicon nanowires (Si NWs), produced by metal-assisted chemical etching, with 20 nm gold nanoparticles (Au NPs) for surface-enhanced Raman scattering (SERS) applications. To optimize the production of a uniform 3D SERS active platform, we tested different Si NW surface functionalizations with various alkoxysilanes before Au decoration. Scanning electron microscopy investigations confirm that Au NPs decorate both bare and (3-glycidiloxypropyl)trimethoxysilane (GPTMS)-modified Si NWs with a high surface coverage uniformity. The SERS response of the decorated NWs was probed using a model dye system (methylene blue; MB) at 633 and 785 nm excitation wavelengths. The GPTMS-modified NWs present the highest enhancements of 2.9 and 2.6 for the 450 cm-1 and 1625 cm-1 peaks under 785 nm excitation and of 10.8 and 5.3 for the 450 cm-1 and 1625 cm-1 peaks under 633 nm excitation. These results demonstrate the perspective role of Si NWs decorated with Au NPs as a low-cost 3D SERS platform.

Synthesis and characterization of Pd0 nanoparticles supported over hydroxyapatite nanospheres for potential application as a promising catalyst for nitrophenol reduction

Nitrophenols, which are defined as an important toxic and carcinogenic pollutant in agricultural and industrial wastewater due to their solubility in water, form of resistance against all organisms in water resources. It is vital that these compounds, which are highly toxic as well as highly explosive, are removed from the aquatic ecosystem. In this paper, we reported the preparation and advanced characterization of Pd0 nanoparticles supported over hydroxyapatite nanospheres (Pd0@nano-HAp). The catalytic efficiency of the Pd0@nano-HAp catalyst was examined in the reduction of nitrophenols in water in the presence of NaBH4 as reducing agent and the great activity of catalyst have been specified against 2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol and 2,4,6-trinitrophenol compounds with 70.6, 82.4, 27.6 and 41.4 min-1 TOFinitial values, respectively. Another important point is that the Pd0@nano-HAp catalyst has perfect reusability performance (at 5th reuse between 68.5 and 92.8 %) for the reduction of nitrophenols. In addition, catalytic studies were carried out at different temperatures in order to determine thermodynamic parameters such as Ea, ΔH≠ and ΔS≠.

Polymer hydrogels for stabilization of inorganic nanoparticles and their application in catalysis for degradation of toxic chemicals

Poly(styrene-N-isopropylmethacrylamide-methacrylic acid) core-shell [P(SNM)CS] microgel particles were synthesised by seed-mediated emulsion polymerisation method. Silver nanoparticles were loaded into shell of P(SNM)CS microgels by in situ reduction of Ag⁺ ions. Synthesised core-shell microgels and hybrid core-shell microgels were characterised by using Fourier transformed infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), UV-Visible spectroscopy and Dynamic light scattering (DLS). Stability of Ag nanoparticles within P(SNM)CS system was also investigated over the time using UV-Visible spectroscopy. Catalytic properties of silver nanoparticles loaded microgel system [Ag-P(SNM)CS] were studied by reducing Eosin-Y and Methylene blue with NaBH₄ in water. The values of observed rate constant (k_obs) were determined under different reaction conditions. The hybrid system was capable to degrade both dyes and may be used for degradation of several other toxic chemicals efficiently.

Chitosan-based carbon nitride-polydopamine‑silver composite dressing with antibacterial properties for wound healing

Infection represents a major clinical barrier that delays wound healing, while the overuse of antibiotics can lead to bacterial resistance. Hence, it is of particular important to develop a new type of dressing to combat bacterial resistance. Herein, a carbon nitride-polydopamine‑silver complex (C₃N₄-PDA-Ag) was prepared using the photocatalyst C₃N₄ and silver nanoparticles (Ag NPs) to achieve a synergistic antimicrobial effect. The solution casting method was then employed to further modify the C₃N₄-PDA-Ag complex by compounding it with chitosan (CS), thereby forming a C₃N₄-PDA-Ag@CS film. The results revealed that the C₃N₄-PDA-Ag@CS film exhibits superior antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa compared to the CS group. The hemolysis, cytotoxicity, and in vivo implantation experiments indicated that the composite film possesses excellent in vitro and in vivo biocompatibility. In addition, the composite dressing promoted wound healing in infected mice by facilitating collagen deposition and accelerating epidermal regeneration. Collectively, the findings of this study clearly demonstrate that the C₃N₄-PDA-Ag@CS composite dressing has excellent antibacterial properties, biocompatibility, and enhances wound healing, thus providing a strategy for the application of photocatalytic materials for the treatment of infected wounds.

Green synthesis of reduced graphene oxide/chitosan/gold nanoparticles composites and their catalytic activity for reduction of 4-nitrophenol

Gold nanoparticles (AuNPs) have attracted extensive attention in the past few years due to their unique properties and great potential application in catalysis. However, the application of AuNPs remains a significant challenge due to the lack of high efficiency and stability caused by aggregation. Immobilization of AuNPs on appropriate support shows promising results in avoiding aggregation and improving catalytic activity. In this work, reduced graphene oxide/chitosan/gold nanoparticles (rGO/CHS/AuNPs) composites were prepared using chitosan with different molecular weights (MW) as a reducing agent and stabilizer, and characterized by FT-IR, XRD, XPS, SEM, FESEM, EDS, TEM, HRTEM, and TGA. The preparation conditions of rGO/CHS/AuNPs composites, including chitosan MW, CHS/GO mass ratio, reaction temperature and time, and HAuCl₄ concentration were investigated in detail. The results indicated that reduction activity of chitosan for GO increased with the decrease of chitosan MW. The C/O ratio of rGO reduced by low molecular weight chitosan (LMWC) with viscosity-average molecular weight (Mv) of 21 kDa was 6.34. Small spherical AuNPs were uniformly immobilized on the rGO surface. The particle size of AuNPs increased from 9.29 to 13.03 nm as chitosan MW decreased from 465 to 21 kDa. The rGO/CHS/AuNPs showed good catalytic activity for the reduction of 4-NP in the presence of NaBH₄. The catalytic activity of rGO/CHS/AuNPs was closely related to chitosan MW. rGO/CHS/AuNPs synthesized by LMWC with Mv of 21 kDa showed the highest kinetic rate constant of 0.2067 min^-1. The results of this experimental study could be useful in the development of effective catalysts for the reduction of aromatic nitro compounds.

Structural and Molecular Fusion MRI Nanoprobe for Differential Diagnosis of Malignant Tumors and Follow-Up Chemodynamic Therapy

Enhanced imaging techniques using contrast agents enable high-resolution structural imaging to reveal space-occupying lesions but rarely provide detailed molecular information. To this end, we report a structural and molecular fusion magnetic resonance imaging (MRI) nanoprobe for differential diagnosis between benign and malignant tumors. This fusion nanoprobe, termed FFT NPs, follows a working mechanism involving a T₁-/T₂-weighted magnetic resonance tuning effect (MRET) between a magnetic Fe₃O₄ core and a paramagnetic Fe-tannic acid (Fe-TA) shell. The FFT NPs with an "always-on" inert T₂ signal provide structural MRI (sMRI) contrast of tumors while affording an activated T₁ signal in the presence of ATP, which is overproduced during the rapid growth of malignant tumors to enable molecular MRI (mMRI) of tumor lesions. We propose the use of the ratiometric mMRI:sMRI intensity to assist in the differential diagnosis of malignant 4T1 tumors from benign L929 fibroblast tumors. Furthermore, the dissociated FFT NPs were found to be able to catalyze H₂O₂ conversion in 4T1 tumors to generate excess reactive oxygen species (ROS) for chemodynamic therapy. The described fusion nanoprobe strategy enables the differential diagnosis of tumors from a combined spatial and molecular perspective with one-stop MRI imaging with potential applications in precision intervention.

Photocatalytically Active Semiconductor Cu3P Unites with Flocculent TiN for Efficient Removal of Sulfamethoxazole

Sulfamethoxazole is a widely—used antibiotic with high water solubility and low biodegradability, which was considered a refractory environmental pollutant. Hence, a series of functionalized hybrids uniting Cu3P with TiN were prepared. The Cu3P/TiN—x composites remarkably removed the sulfamethoxazole in solution compared with Cu3P and TiN alone. All the as—prepared Cu3P/TiN—x hybrids integrated the advantages of strong adsorption and photocatalysis and achieved removal rates above 70% of sulfamethoxazole. Among the composites, the Cu3P/TiN—2 with a 1:1 molar ratio of Cu: Ti reached a 90% removal rate under dark adsorption for 30 min and subsequent photodegradation for 120 min. The enhanced performance of the Cu3P/TiN—x composites is attributed to the introduced flocculent TiN with a large specific surface area and high conductivity that provide more reactive sites and high electron transferability. Meanwhile, the strong corrosion resistance and chemical stability were also beneficial to the improved performance. Cycling experiments further demonstrate the stability and reliability of the composites. In addition, the capture experiments indicated that the superoxide radical (·O2−) and hydroxyl radical (·OH) played a major role in sulfamethoxazole degradation.

Ni-Pd-Incorporated Fe3O4 Yolk-Shelled Nanospheres as Efficient Magnetically Recyclable Catalysts for Reduction of N-Containing Unsaturated Compounds

The use of metal-based heterogeneous catalysts for the degradation of N-containing organic dyes has attracted much attention due to their excellent treatment efficiency and capability. Here, we report the synthesis of heterometals (Ni and Pd)-incorporated Fe3O4 (Ni-Pd/Fe3O4) yolk-shelled nanospheres for the catalytic reduction of N-containing organic dyes using a facile combination of solvothermal treatment and high-temperature annealing steps. Benefiting from the magnetic properties and the yolk-shelled structure of the Fe3O4 support, as well as the uniformly dispersed active heterometals incorporated in the shell and yolk of spherical Fe3O4 nanoparticles, the as-prepared Ni-Pd/Fe3O4 composite shows excellent recyclability and enhanced catalytic activity for three N-containing organic dyes (e.g., 4-nitrophenol, Congo red, and methyl orange) compared with its mono metal counterparts (e.g., Ni/Fe3O4 and Pd/Fe3O4). In the 4-nitrophenol reduction reaction, the catalytic activity of Ni-Pd/Fe3O4 was superior to many Fe3O4-supported nanocatalysts reported within the last five years. This work provides an effective strategy to boost the activity of iron oxide-based catalytic materials via dual or even multiple heterometallic incorporation strategy and sheds new light on environmental catalysis.

Gold Nanomaterials and their Composites as Electrochemical Sensing Platforms for Nitrite Detection

Nitrite is one of the abundant toxic components existing in the environment and is likely to have a great potential to affect human health badly. For that reason, it has become crucial to build a reliable nitrite detection method. In recent years, several nitrite monitoring systems have been proposed. Compared with traditional analytical strategies, the electrochemical approach has a bunch of advantages, including low cost, rapid response, easy operation, simplicity, etc. In this case, noble metal nanomaterials, especially Au-based nanomaterials, have attracted attention in electrode modification because of higher catalytic activity, facile mass transfer, and broad active area for determining nitrite. This review is based on the state-of-the-art, which includes a variety of nanomaterials that have been coupled with AuNPs for the creation of nanocomposites, and the construction as well as development of electrochemical sensors for nitrite detection over the last few years (2016-2022). A background study on synthesizing different morphological AuNPs and nanocomposites has also been introduced. The fabrication methods and sensing capabilities of modified electrodes are given special consideration.

Swift reduction of nitroaromatics by gold nanoparticles anchored on steam-activated carbon black via simple preparation

Gold (Au) nanoparticles supported on certain platforms display highly efficient activity on nitroaromatics reduction. In this study, steam-activated carbon black (SCB) was used as a platform to fabricate Au/SCB composites via a green and simple method for 4-nitrophenol (4-NP) reduction. The obtained Au/SCB composites exhibit efficient catalytic performance in reduction of 4-NP (rate constant k_app = 2.1925 min^-1). The effects of SCB activated under different steam temperature, Au loading amount, pH, and reaction temperature and NaBH₄ concentration were studied. The structural advantages of SCB as a platform were analyzed by various characterizations. Especially, the result of N₂ adsorption-desorption method showed that steam activating process could bring higher surface area (from 185.9689 to 249.0053 m²/g), larger pore volume (from 0.073268 to 0.165246 cm³/g), and more micropore for SCB when compared with initial CB, demonstrating the suitable of SCB for Au NP anchoring, thus promoting the catalytic activity. This work contributes to the fabrication of other supported metal nanoparticle catalysts for preparing different functional nanocomposites for different applications.

Metal Ion-Directed Functional Metal-Phenolic Materials

Metal ions are ubiquitous in nature and play significant roles in assembling functional materials in fields spanning chemistry, biology, and materials science. Metal-phenolic materials are assembled from phenolic components in the presence of metal ions through the formation of metal-organic complexes. Alkali, alkali-earth, transition, and noble metal ions as well as metalloids interacting with phenolic building blocks have been widely exploited to generate diverse hybrid materials. Despite extensive studies on the synthesis of metal-phenolic materials, a comprehensive summary of how metal ions guide the assembly of phenolic compounds is lacking. A fundamental understanding of the roles of metal ions in metal-phenolic materials engineering will facilitate the assembly of materials with specific and functional properties. In this review, we focus on the diversity and function of metal ions in metal-phenolic material engineering and emerging applications. Specifically, we discuss the range of underlying interactions, including (i) cation-π, (ii) coordination, (iii) redox, and (iv) dynamic covalent interactions, and highlight the wide range of material properties resulting from these interactions. Applications (e.g., biological, catalytic, and environmental) and perspectives of metal-phenolic materials are also highlighted.

UV-assisted ultrafast construction of robust Fe3O4/polydopamine/Ag Fenton-like catalysts for highly efficient micropollutant decomposition

Fenton-like catalysts represent a family of promising materials to degrade micropollutants from contaminated water. However, the practical applications of Fenton-like catalysts are mainly limited by low catalytic degradation efficiency and stability. Herein, for the first time, rapid fabrication of Ag-decorated Fe₃O₄/polydopamine (FPA) microspheres was achieved via the help of UV irradiation, and the designed FPA microspheres were employed as Fenton-like catalysts to degrade micropollutants. Results showed that UV irradiation could activate the generation of the polydopamine shell and accelerate the Ag deposition, which played a crucial role in the rapid synthesis of highly active and stable FPA catalysts. Relative to reported catalysts, these FPA microspheres exhibited outstanding catalytic degradation performance, achieving 94.38% removal of tetracycline within 60 min. This work will provide a convenient strategy in the sustainable and efficient purification of wastewater to improve the quality of human life.

Fabrication of photo-Fenton self-cleaning PVDF composite membrane for highly efficient oil-in-water emulsion separation

The anti-fouling performance of membranes is an important performance in the separation of oil/water.

Evaluating the metabolic functional profiles of the microbial community and alfalfa (Medicago sativa) traits affected by the presence of carbon nanotubes and antimony in drained and waterlogged sediments

Antimony (Sb) is the ubiquitous re-emerging contaminant greatly accumulated in sediments which has been revealed risky to ecological environment. However, the impacts of Sb (III/V) on microbes and plants in sediments, under different water management with presence of engineering materials are poorly understood. This study conducted sequential incubation of sediments (flooding, draining and planting) with presence of multiwall carbon nanotubes (MWCNTs) and Sb to explore the influence on microbial functional diversity, Sb accumulation and alfalfa traits. Results showed that water management and planting led to greater impacts of sediment enzyme activities and microbial community metabolic function and bioavailable Sb fractions (defined as sum of acid-soluble fraction and reducible fraction, F1 + F2). Available fractions of Sb (V) showed higher correlation to microbial metabolism (r = 0.933) than that of Sb (III) (r = -0.480) in planting stage. MWCNTs with increasing concentrations (0.011%, w/w) positively correlated to microbial community metabolic function in planting stage whereas resulted in decreasing of Sb (III/V) concentrations in alfalfa, although 0.01% MWCNT led to increase of Sb (V) and decrease of Sb (V) by 50.97% and 32.68% respectively. This study provided information for investigating combined ecological impacts of heavy metal and engineering materials under different water managing sediments.

One-Dimensional CdS/Carbon/Au Plasmonic Nanoarray Photoanodes via In Situ Reduction-Graphitization Approach toward Efficient Solar Hydrogen Evolution

Photoelectrochemical (PEC) hydrogen evolution has been acknowledged as a promising "green" technique to convert solar energy into clean chemical fuel. Photoanodes play a key role in determining the performance of PEC systems, spurring numerous efforts to develop advanced materials as well as structures to improve the photoconversion efficiency. In this work, we report the rational design of a plasmonic hierarchical nanorod array, composed of oriented one-dimensional (1D) CdS nanorods decorated with a uniformly wrapped graphite-like carbon (C_PDA) layer and Au nanoparticles (Au NPs), as highly efficient photoanode materials. An interfacial in situ reduction-graphitization method has been conducted to prepare the CdS/C_PDA/Au nanoarchitecture, where polydopamine (PDA) coating was used as a C source and a reductant. The CdS/C_PDA/Au nanoarray photoanode demonstrates superior photoconversion efficiency with a photocurrent density of 8.74 mA/cm² and an IPCE value (480 nm) of 30.2% (at 1.23 V vs RHE), under simulated sunlight irradiation, which are 12.7 and 13.5 times higher than pristine CdS. The significant enhancement of PEC performance is mainly benefited from the increase of the entire quantum yield and efficiency due to the formation of a Schottky rectifier, localized surface plasmon resonance (LSPR)-enhanced light absorption, and promoted hot-electron injection from interlayered graphene-like carbon. More importantly, thanks to the inhibited charge carrier recombination process and transferred oxidation reaction sites, the fabricated CdS/C_PDA/Au photoelectrode exhibits lengthened electron lifetimes and better photostability, illustrating its wonderful potential for future PEC application.

Biogenic Synthesis of Gold Nanoparticles on a Green Support as a Reusable Catalyst for the Hydrogenation of Nitroarene and Quinoline

Direct attachment of gold nanoparticles to a green support without the use of an external reducing agent and using it for removing toxic pollutants from wastewater, i. e., reduction of nitroarene to amine, are described. A novel approach involving the reduction of gold by the jute plant (Corchorus genus) stem-based (JPS) support itself to form nanoparticles (AuNPs) to be used as a catalytic system ('dip-catalyst') and its catalytic activity for the hydrogenation of series of nitroarenes in aqueous media are presented. AuNPs/JPS catalyst was characterized using SEM, UV-Vis, FTIR, TEM, XPS, and ICP-OES. Confined area elemental mapping exhibits uniform and homogeneous distribution of AuNPs on the support surface. TEM shows multi-faceted AuNPs in the range of 20-30 nm. The reactivity of AuNPs/JPS for the transfer hydrogenation of nitroarene as well as hydrogenation of quinoline under molecular H₂ pressure was evaluated. Sodium borohydride, when used as the hydrogen source, demonstrates a high catalytic efficiency in the transfer hydrogenation reduction of 4-nitrophenol (4-NP). Quinoline is quantitatively and chemoselectively hydrogenated to 1,2,3,4-tetrahydroquinoline (py-THQ) using molecular hydrogen. Reusability studies show that AuNPs are stable on the support surface and their selectivity is not affected.

Fabrication of self-assembled 0D-2D Bi2MoO6-g-C3N4 photocatalytic composite membrane based on PDA intermediate coating with visible light self-cleaning performance

A Self-cleaning surface can efficaciously solve the problem of irreversible contamination buildup on filtration membranes. Photocatalytic membranes were fabricated via vacuum assisted layer-by-layer (LBL) self-assembly of 0D-2D Bi₂MoO₆-g-C₃N₄ on a PDA coated thin-film composite PVDF substrate by Schiff base reaction. The rejection rate of the simulated polysaccharide was more than 90%, and that of the simulated protein was more than 80%. The combination of the membrane and the photocatalyst promoted the degradation of tetracycline hydrochloride by the composite membrane to 67.85% when original membranes had minor effect. Under visible light, reversible radiation pollutants (R_r) gradually replaced irreversible pollutants (R_ir) as the main pollutants. The flux recovery ratio (FRR) of 0D-2D Bi₂MoO₆-g-C₃N₄/PVDF membrane was 85% after being irradiated with visible light for 30 min. The flux recovery rate of contaminated photocatalytic membrane remained 75%, and the rejection was maintained in a stable range after four cycles of the cleaning operation under visible light. The results indicated that the excellent photocatalytic performance of 0D-2D Bi₂MoO₆-g-C₃N₄ photocatalysis material and the increase of multi-dimensional functional layer morphology on pollutant contact area improved the mechanical stability, interception performance and self-cleaning performance of the composite membrane. This work not only builds a new type of composite coating membranes, but also help us to further understand the relationship between the dimensions of photocatalytic materials and the improvement of photocatalytic membrane performance.

Preparation of UiO-66-NH2@PDA under Water System for Chemical Warfare Agents Degradation

There is an urgent need to develop catalytic degradation technologies for chemical warfare agents (CWAs) that are environmentally friendly and do not require secondary treatment. UiO-66-NH₂ and other metal–organic frameworks (MOFs) based on zirconium have been shown to promote the catalytic degradation of CWAs. At the same time, MOFs have been studied, and they have shown interesting properties in CWA removal because of their ultrahigh surface area, tunable structures, and periodically distributed abundant catalytic sites. However, MOFs synthesized by conventional methods are mostly powdery crystals that are difficult to process and have poor mechanical stability, which largely limit the development of MOFs in practical applications. An emerging trend in MOF research is hybridization with flexible materials. Polymers possess a variety of unique attributes, such as flexibility, thermal and chemical stability, and process ability, and these properties can be combined with MOFs to make a low-cost and versatile material that also provides convenience for the subsequent integration of such MOFs into independent substrates or textiles. In this article, we used a green and simple method to coat the surface of UiO-66-NH₂ with polydopamine (PDA), PDA can promote the catalytic hydrolysis of UiO-66-NH₂ to DMNP (a simulant of chemical warfare agents). Additionally, it can adsorb the toxic hydrolysis product p-nitrophenol, avoiding the trouble of secondary treatment. The half-life of UiO-66-NH₂ coated with polydopamine (UiO-66-NH₂@PDA) for catalytic hydrolysis is 8.9 min, and that of pure UiO-66-NH₂ is 20 min. We speculate that the surface coated with PDA can improve the diffusion of DMNP to the active sites of UiO-66-NH₂.

Zinc oxide pieces obtained by pressing and slip casting: physical, structural and photocatalytic properties

Photocatalysis is a promising alternative for the decontamination of effluents. In this paper, immobilized ZnO-based photocatalysts were obtained by pressing and by slip casting. The cylindrical pieces were heat-treated at 800°C. The samples were characterized by the method based on the principle of Archimedes, XRD, FTIR, Raman, diffuse reflectance and SEM. The samples obtained by slip casting presented lower apparent density (3.12 ± 0.04 g/cm³), higher apparent porosity (44.87 ± 0.47%) and smaller grain size (0.48 ± 0.05 µm) when compared to the pressed samples, with mean apparent density of 5.37 ± 0.08 g/cm³, apparent porosity of 1.56 ± 0.10% and grain size of 0.64 ± 0.02 µm. The performances of the samples were attested by the photocatalytic degradation of Rhodamine B (RhB) under UV-C irradiation (maximum intensity at 254 nm). The samples obtained by slip casting showed photocatalytic degradation between 80% and 90%, while the pressed samples showed degradation between 40% and 60%. The reuse of the photocatalysts was evaluated over five cycles of photocatalytic degradation, in which there was no loss of performance of the samples obtained by slip casting; however, the pressed samples showed a loss of photocatalytic efficiency starting from the third-cycle. Photocatalytic assays were carried out with different dye concentrations, in which the slip casting samples showed better photocatalytic efficiency (degradation of 80% for a RhB concentration of 10 mg/L) due to higher porosity and surface area compared to pressed samples, and there was a loss of performance in higher concentrations.

Fabrication of stable high-performance urchin-like CeO2/ZnO@Au hierarchical heterojunction photocatalyst for water remediation

In this paper, the urchin-like CeO₂/ZnO@Au photocatalyst was rationally designed and prepared through hydrothermal method, chemical precipitation and photo reduction deposition. The optimal photocatalyst (CZA8) degraded Rhodamine B (RhB), 4-nitrophenol (4-NP) and Naproxen (NPX) about 100% within 20 min, 91.4% within 60 min and 88.9% within 30 min under Xe lamp illumination, respectively. Besides, the CZA8 possesses outstanding photo corrosion resistance capacity which has been verified with the cycle degradation experiments. The photocatalyst displays excellent light response and efficient separation of photo-induced carriers due to the fabrication of type-II heterojunction, the presence of surface plasmon resonance (SPR) effect and as well as the oxygen vacancy. The oxygen vacancy was systematically characterized by XPS, PL and Raman. Moreover, the photocatalytic degradation pathways are proposed based on the LC-MS results. Finally, a novel photocatalytic mechanism for photocatalytic oxidation of RhB, 4-NP and NPX is discussed and schematically illuminated.

Fe/N co-doped mesoporous carbon derived from cellulose-based ionic liquid as an efficient heterogeneous catalyst toward nitro aromatic compound reduction reaction

Iron and nitrogen-doped carbon substances with abundant active sites that related to dispersion of heteroatom species (Fe and N) on the surface of carbonous structure, are promising choice for eco-friendly catalytic reactions. Herein, cellulose-based ionic liquid (IL) derivative not only employed as the both nitrogen and iron heteroatom precursors, but also has been used as the green and biodegradable substrate. The non-noble Fe-NC@550, was successfully fabricated by convenient carbonization of cellulose-based IL. Further, the FeCl₄^- anion was used as the iron precursor and also it has been applied to elevate the SSA (specific surface area) of catalyst (from 40.96 to 160.42 m²/g) due to the presence of chlorine. On the basis of several pertinent physicochemical and experimental outcomes, the structure of the catalyst was successfully proved in different synthetic steps. As expected, the Fe-NC@550 exhibited the substantial efficiency toward hydrogenation of nitroarenes with high TOF value and also remarkable reusability.

Microwave-assisted fabrication of g-C3N4 nanosheets sustained Bi2S3 heterojunction composites for the catalytic reduction of 4-nitrophenol

In this work, we report a stable g-C₃N₄, Bi₂S₃, and g-C₃N₄/Bi₂S₃ composite catalysts were prepared via a facile one-pot microwave-assisted method and characterized. The orthorhombic phase and nearly spherical shape of the particles with an average diameter of 5-25 nm of g-C₃N₄/Bi₂S₃ composite were obtained from XRD and TEM. The composite also exhibits a high surface area (32.15 m²/g), which may provide convenient transportation and diffusion for substrate molecule. The optical studies were displayed the g-C₃N₄/Bi₂S₃ composite has a sharp absorption band in the visible region, higher charge separation, and reduced recombination rate. These results show that the Bi₂S₃ NPs have good crystallinity and are uniformly deposited on the surface of the g-C₃N₄ sheet. The catalytic performance of the g-C₃N₄/Bi₂S₃ composite for the reduction of 4-NP to 4-AP was exhibited approximately 100%, which is 1.48 and 2.34 times higher than the Bi₂S₃ and g-C₃N₄ catalysts, respectively. The pseudo-first-order rate constant was estimated as 1.648 × 10 ^-2 min^-1 for the reduction of 4-NP using g-C₃N₄/Bi₂S₃ composite in 1 h reaction time. The effect of catalyst dosage (0-30 mg) was also investigated for the reduction of 4-NP using g-C₃N₄/Bi₂S₃ composite catalyst. Moreover, the reusability of the g-C₃N₄/Bi₂S₃ composite was exhibited a better reduction of the 4-NP even after 5 cycles and it was found that 8% reduction in the initial reduction rate. The obtained results from this study show that g-C₃N₄/Bi₂S₃ composite has the potential efficiency and stability to make it an ideal catalyst for the reduction of toxic effluents and wastewater treatment.

Gold nanoparticles capped with polysaccharides extracted from pineapple gum: Evaluation of their hemocompatibility and electrochemical sensing properties

In the present work, gold nanoparticles were synthesized through a green route by using, for the first time, polysaccharides extracted from pineapple gum (PG) as the reducing and capping agent. The obtained nanoparticles (AuNPs-PG) were characterized by UV-VIS, FTIR, TEM, FESEM, EDX, XRD, and zeta potential measurements, which confirmed that PG was effective to produce AuNPs with an average diameter of 10.3 ± 1.6 nm. The AuNPs-PG were employed as the modifier of glassy carbon paste electrodes (CPE/AuNPs-PG), which were applied as sensitive electrochemical sensors to the determination of the antihistamine drug promethazine hydrochloride (PMZ). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements showed that the AuNPs-PG could enhance the electronic transfer properties of the glassy carbon paste, which was due to their large surface area and high electrical conductivity. After optimization of the instrumental parameters of square wave voltammetry (SWV) through a Box-Behnken factorial design, a linear relationship between the anodic peak current and PMZ concentration was obtained in the range from 2.0 to 15.7 μmol L^-1 in McIlvaine buffer solution pH 5.0. The detection and quantification limits were found to be equal to 1.33 and 4.44 μmol L^-1, respectively. The developed sensors could successfully quantify PMZ in different commercial pharmaceutical formulations, with satisfactory levels of accuracy and precision. In addition to improving the analytical features of the electrodes, hemocompatibility assays carried out on erythrocytes and leukocytes showed that the AuNPs-PG do not exhibit toxic effects on the referred cells. This interesting behavior enables their use in biocompatible electrochemical sensing platforms as well as for future biomedical investigations.

Sol-gel synthesis and characterization of Co3O4/CeO2 nanocomposites and its application for photocatalytic discoloration of organic dye from aqueous solutions

Herein, Co₃O₄/CeO₂ nanocomposite was synthesized by the modified Pechini method. Citric, maleic, succinic, and trimsic acids were used as a stabilizer, and the variation affected the morphology and size of the synthesized nanocomposites. Subsequently, the formation of Co₃O₄/CeO₂ nanocomposites was confirmed by various analyses. Furthermore, the particles were considered for size and morphology by SEM and HRTEM analyses, and the sample that used trimsic acid as the stabilizer was designated as the goal sample to continue the route. The optimum sample was used to investigate the photocatalytic properties of the synthesized nanocomposite. The UV-light photocatalyst test was performed in neutral, alkaline, and acidic states against two aqueous solutions containing color contamination of methylene blue and erythrosine B dyes. The results showed decolorization at 85% for methylene blue and 90% for erythrosine B over 120 min test time.

Highly Efficient Silver Catalyst Supported by a Spherical Covalent Organic Framework for the Continuous Reduction of 4-Nitrophenol

Developing new materials and novel technologies for the highly efficient treatment of toxic organic pollutants is highly desirable. Chemical reduction based on heterogeneous substrate/noble metal catalysts and the reducing agent NaBH₄ has become an effective method in recent years. Here, a spherical covalent organic framework (SCOF) was designed to provide basic sites for Ag ions, by which small Ag NPs were immobilized on the SCOF to form Ag NPs@SCOF microspheres. The prepared microspheres exhibited a high catalytic reduction ability toward 4-nitrophenol (4-NP). An optimized permeation flux of 2000 L m^-2 h^-1 (LMH) and a more than 99% 4-NP reduction efficiency were obtained with flow-through experiments, which are far better than the reported results (below 200 LMH). Moreover, the microspheres could maintain stable catalytic performance under a continuous flow-through process. Our work provides an efficient material and technology that can be applied to easily treat toxic organic pollutants.

Preparation of CuSe-PDA/g-C3N4 and its visible-light photocatalytic performance to dye degradation

CuSe as an excellent photocatalytic semiconductor material has wildly used in the field of photocatalysis. In this paper, CuSe-PDA/g-C₃N₄ was designed and synthesized, and the photocatalytic performance of CuSe was further enhanced by the addition of polydopamine (PDA) and graphite phase carbon nitride (g-C₃N₄). The as-prepared CuSe-PDA/g-C₃N₄ was characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), and elemental mapping. The specific surface area and porous characteristics of the material were also studied by N₂ adsorption-desorption isotherm, which the specific surface area were 186.6 m²/g and pore size were of 3.1 nm by BET data analysis. The photocatalytic conditions for the degradation of methylene blue (MB) by CuSe-PDA/g-C₃N₄ were optimized in the experiment. The results showed that the photocatalytic performance of CuSe-PDA/g-C₃N₄ under visible-light illumination were better than CuSe and PDA owing to the narrow band gap energy and delayed electron-hole recombination. Under the optimized conditions, the removal rate reach to 99% of 50 mg/L MB within 60 min irradiation time. Moreover, the MB removal rate was over 90% through six repeated experiments, which proved that the CuSe-PDA/g-C₃N₄ composite nanomaterials have good stability and reusability.

Synthesis of CeO2 hollow microspheres with oxidase-like activity and their application in the catalytic degradation of p-nitrophenol

CeO₂ materials have received wide attention given their oxidase-like activity without the need for an unstable oxide substrate in the catalytic process. Nevertheless, their application and mechanism in the catalytic oxidation of refractory organic pollutants needs further study. Herein, CeO₂ hollow microspheres (HMS) with an intrinsic oxidase-like activity were synthesised via a template-free hydrothermal method and their effectiveness in degrading p-nitrophenol(p-NP) was investigated. HMS showed a maximum p-NP degradation rate of 76.5% at a CeO₂ dosage of 40 mg, 2 h reactive time, at 30°C and pH of 4.8 when the concentration of p-NP was 20 mg L^-1. The catalytic activity of CeO₂ HMS also exhibited good thermal stability and reusability. These results provide strong evidence that CeO₂ HMS can be utilised as an oxidase mimetic for the efficient catalytic degradation of refractory organic pollutants. A possible mechanism for the degradation of p-NP is also discussed.