Enhanced removal of uranium(VI) from aqueous solution by a novel Mg-MOF-74-derived porous MgO/carbon adsorbent

The use of bimetallic metal-organic frameworks as restoration materials for pollutants removal from water environment

Bimetallic metal-organic frameworks (BMOFs) are a class of functional porous materials constructed by coordination between nodes containing two different metal ions and organic ligands. Studies have shown that the catalytic activity of BMOFs is greatly improved owing to the adjustment of charge distribution and the increase of active sites as well as the synergistic effect between the bimetals, and the advantages of their large specific surface area, high porosity, unique structure and dispersed active centres make them available as important organic materials applied in the field of wastewater treatment. In this review, the preparation and construction methods for BMOFs in recent years are summarized, and we focus on their removal of different types of pollutants in the aqueous environment, including ions, dyes, pharmaceuticals or personal care products, phenolic compounds and microorganisms, as well as their corresponding removal mechanisms. In addition, we provide an outlook on their future opportunities and challenges in wastewater treatment.

Exploring recyclable alginate-enhanced GCN-LDO sponge for U(VI) and Cd(II) removal: Insights from batch and column studies

Developing effective water treatment materials, particularly through proven adsorption methods, is crucial for removing heavy metal contaminants. This study synthesizes a cost-effective three-dimensional material encapsulating graphitic carbon nitride-layered double oxide (GCN-LDO) in sodium alginate (SA) through the freeze-drying method. The material is applied to remove uranium (U(VI)) and cadmium (Cd(II)) in real water systems. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analyses conclusively verified the elemental composition and successful encapsulation of GCN-LDO within the SA matrix. Removal effectiveness was tested under various conditions, including adsorbent dose, ionic strength, contact time, temperature, different initial pollutant concentrations, and the impact of co-existing ions. The adsorption of U(VI) and Cd(II) conformed to the pseudo-second-order (PSO) kinetic model, signifying a chemical interaction between the sodium alginate-graphitic carbon nitride-layered double oxide (SA-GCN-LDO) sponge and the metal ions. The Langmuir isotherm indicated monolayer, homogeneous adsorption for U(VI) and Cd(II) with capacities of 158.25 and 165.00 mg/g. SA-GCN-LDO recyclability was found in up to seven adsorption cycles with a removal efficacy of 70%. The temperature effect study depicts the exothermic nature of the U(VI) and Cd(II) ion removal process. Various mechanisms involved in U(VI) and Cd(II) removal were proposed. Further, continuous fixed bed column studies were performed, and Thomas and the Yoon-Nelson model were studied. These insights from this investigation contribute to advancing our knowledge of the material's performance within the context of U(VI) and Cd(II) adsorption, paving the way for optimized and sustainable water treatment solutions.

Preparation and mechanism study of hydrogen bond induced enhanced composited gelatin microsphere probe

Fluorescent probes offer rapid and efficient detection of metal ions. However, their properties, including high biotoxicity and low detection limits, often limit their utility in biological systems. In this study, we used a microfluidic approach to fabricate photocrosslinked gelatin microspheres with a micropore, providing a straightforward method for loading fluorescent probes into these microspheres based on the adsorption effect and hydrogen bonding interaction. The gelatin microsphere loaded probes, GelMA/TPA-DAP and GelMA/TPA-ISO-HNO were designed and obtained. The results show that these probes exhibit obviously low biotoxicity compared to the original molecular probes TPA-DAP and TPA-ISO-HNO. Simultaneously, it is found that GelMA/TPA-DAP and GelMA/TPA-ISO-HNO have better detection sensitivity, the detection limits are 35.4 nM for Cu2+, 16.5 nM for Co2+ and 20.5 nM for Ni2+ for GelMA/TPA-DAP probe. Compared to the original TPA-DAP they are improved by 37.2 %, 26.3 % and 22.6 % respectively. The corresponding coordination constants were 10.8 × 105, 4.11×105 and 6.04×105, which is larger than homologous TPA-DAP. Similar results were also verified in the GelMA/TPA-ISO-HNO probe. The mechanism was investigated in detail by theoretical simulations and advanced spectral analysis. The density functional theory (DFT) simulations show that the probes are anchored inside the microspheres and the molecular structure is modified due to the hydrogen bonding interaction between the microsphere and the molecular probe, which makes GelMA/TPA-DAP exhibit stronger coordination capacity with metal ions than homologous TPA-DAP. In addition, the adsorption effect also provided some synergistic enhancement contribution. Meanwhile, cellular experiments have also shown that the composite microspheres can improve the biocompatibility of the probe and will provide a wider range of applications towards bioassay. This simple and effective method will provide a convenient way to improve the performance of fluorescent probes and their biological applications.

Adsorbents for the Uranium Capture from Seawater for a Clean Energy Source and Environmental Safety: A Review

On the global level, uranium is considered the main nuclear energy source, and its removal from terrestrial ores is enough to last until the end of the current century. Therefore, a major focus is attracted toward the capture of uranium from a sustainable source (seawater). Uranium recovery from seawater has been reported over the last few decades, and recently many efforts have been devoted to the preparation of such adsorbents with higher selectivity and adsorption capacity. The purpose of this review is to report the advancement in adsorbent preparation and modification of porous materials. It also discusses challenges such as adsorbent selectivity, low uranium concentration in seawater, contact time, biofouling, and the solution to the problems necessary to ensure a better adsorption performance of the adsorbent.

Synergetic and advanced isotherm investigation for the enhancement influence of zeolitization and β-cyclodextrin hybridization on the retention efficiency of U(vi) ions by diatomite

In synergetic investigations, the adsorption effectiveness of diatomite-based zeolitic structure (ZD) as well as its β-cyclodextrin (CD) hybrids (CD/ZD) towards uranium ions (U(vi)) was evaluated to examine the influence of the transformation procedures. The retention behaviors and mechanistic processes have been demonstrated through analyzing the steric and energetic factors employing the modern equilibrium approach (a monolayer model with a single energy level). After the saturation phase, the uptake characteristics of U(vi) were dramatically improved to 297.5 mg g-1 after the CD blending procedure versus ZD (262.3 mg g-1) or 127.8 mg g-1. The steric analysis indicated a notable increase in binding site levels after the zeolitization steps (Nm = 85.7 mg g-1) as well as CD implementation (Nm = 91.2 mg g-1). This finding clarifies the reported improvement in the ability of CD/ZD to effectively retain the U(vi) ions. Furthermore, every single active site of the CD/ZD material has the capacity to adsorb around four ions, which are aligned according to a vertical pattern. The energetic aspects, specifically Gaussian energy (<8 kJ mol-1) along with retention energy (<40 kJ mol-1), validate the regulated influences of the physical mechanistic processes. The physical adsorption of U(vi) seems to depend on various intermolecular forces, such as van der Waals forces, in conjunction with zeolitic ion exchanging pathways (0.6-25 kJ mol-1). The thermodynamic assets have been evaluated to confirm the exothermic together with spontaneous adsorption U(vi) by ZD and its blend with CD (CD/ZD).

Phosphorylated hollow carbon-based material derived from ZIF-8 and its U(VI) adsorptive performance

Inspired by its large specific surface area, and tunable chemical and physical properties, a hollow carbon-based mater8ial derived from ZIF-8 with phosphate groups (HCM-PO4) was prepared for the elimination of U(VI). The structural and surface features of HCM and HCM-PO4 were thoroughly examined using techniques such as SEM, TEM, and XRD. The resulting carbon material, HCM-PO4, exhibits a higher BET surface area of 571.2 m2·g-1, featuring a hollow structure. The removal procedure of HCM-PO4 for U(VI) aligns with the quasi-secondary kinetic model. Furthermore, the theoretical sorption capacity of HCM-PO4 was found to be 482.30 mg·g-1 at 298.15 K. The results obtained from XPS, FT-IR, and EDS analysis of HCM-PO4 after adsorption revealed the coordination of the phosphate group for U(VI), contributing significantly to the adsorption process. In brief, the HCM-PO4 demonstrates excellent adsorptive ability, positioning it as a hopeful expectant to remove U(VI) from wastewater.

One-step synthesis of phospho-rich, silica-enhanced chitosan aerogel for the efficient adsorption of uranium(VI)

In this study, an amorphous silica reinforced, phosphoric-crosslinked chitosan foam (P-CTS@SixOy) was prepared. The introduction of amorphous silica not only increased the affinity of the adsorbent for uranium, but also improved the stability of the material. The number of active sites of P-CTS@SixOy was increased by the introduction of phosphate groups. The material exhibited excellent uranium adsorption performance with the removal capacity and efficiency of 850.5 mg g-1 and 98.1 %, respectively. After regenerations, the morphology of P-CTS@SixOy still maintained, and the uranium adsorption efficiency remained above 90 %, manifesting the excellent cycle performance of P-CTS@SixOy. In the dynamic adsorption experiment, P-CTS@SixOy successfully concentrated the volume of uranium-containing solution, and exhibited excellent uranium adsorption performance. The analysis of kinetics, isotherms, and thermodynamics manifested that the uranium adsorption behavior of P-CTS@SixOy was a spontaneous, endothermic, monolayer chemical adsorption process. X-ray photoelectron spectroscopy, Scanning Electron Microscope, and Fourier Transform Infrared Spectrometer were used to characterized the P-CTS@SixOy before and after adsorption, which demonstrated that the main interaction mechanism between uranium and P-CTS@SixOy was the complexation. These studies indicated the huge application prospect of P-CTS@SixOy in the treatment of large-scale uranium-containing wastewater.

Improving U(VI) retention efficiency and cycling stability of GCN-supported calcined-LDH composite: Mechanism insight and real water system applications

The synthesis and characterization of graphitic carbon nitride (GCN) and its composites with calcined layered double hydroxide (CLDH) were examined in this investigation. The goal was to assess these composites' maximum adsorption capacity (qmax) for U(VI) ions in wastewater. Several different characterization methodologies were utilized to examine the fabricated substances. These methods encompass X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The GCN-CLDH composite displayed enhanced adsorption ability towards U(VI) ions due to its high surface functionality. Langmuir adsorption isotherm analysis showed that more than 99% of U(VI) ions were adsorbed, with a qmax of 196.69 mg/g. The kinetics data exhibited a good fit for a pseudo-second-order (PSO) model. Adsorption mechanisms involving precipitation and surface complexation via Lewis's acid-base interactions were proposed. The application of the GCN-CLDH composite in groundwater demonstrated adsorption below the maximum permissible limit established by USEPA, indicating improved cycling stability. These observations underscore the capacity of the GCN-CLDH composite's proficiency in adsorbing U(VI) aqueous solutions containing radioactive metals.

Significance of MOF adsorbents in uranium remediation from water

Uranium is considered as one of the most perilous radioactive contaminants in the aqueous environment. It has shown detrimental effects on both flora and fauna and because of its toxicities on human beings, therefore its exclusion from the aqueous environment is very essential. The utilization of metal-organic frameworks (MOFs) as an adsorbent for the removal of uranium from the aqueous environment could be a good approach. MOFs possess unique properties like high surface area, high porosity, adjustable pore size, etc. This makes them promising adsorbents for the removal of uranium from contaminated water. In this paper, sources of uranium in the water environment, human health disorders, and application of the different types of MOFs as well as the mechanisms of uranium removal have been discussed meticulously.

Recent developments and challenges in uranium extraction from seawater through amidoxime-functionalized adsorbents

As per statistical estimations, we have only around 100 years of uranium life in terrestrial ores. In contrast, seawater has viable uranium resources that can secure the future of energy. However, to achieve this, environmental challenges need to be overcome, such as low uranium concentration (3.3 ppb), fouling of adsorbents, uranium speciation, oceanic temperature, and competition between elements for the active site of adsorbent (such as vanadium which has a significant influence on uranium adsorption). Furthermore, the deployability of adsorbent under seawater conditions is a gigantic challenge; hence, leaching-resistant stable adsorbents with good reusability and high elution rates are extremely needed. Powdered (nanostructured) adsorbents available today have limitations in fulfilling these requirements. An increase in the grafting density of functional ligands keeping in view economic sustainability is also a major obstacle but a necessity for high uranium uptake. To cope with these challenges, researchers reported hundreds of adsorbents of different kinds, but amidoxime-based polymeric adsorbents have shown some remarkable advantages and are considered the benchmark in uranium extraction history; they have a high affinity for uranium because of electron donors in their structure, and their amphoteric nature is responsible for effective uranium chelation under a wide range of pH. In this review, we have mainly focused on recent developments in uranium extraction from seawater through amidoxime-based adsorbents, their comparative analysis, and problematic factors that are needed to be considered for future research.

Construction of dopamine supported Mg(Ca)Al layered double hydroxides with enhanced adsorption properties for uranium

A novel dopamine-supported Mg(Ca)Al layered double hydroxide composite was synthesized by co-precipitation method. The existence of Ca²⁺ and dopamine could promote the capture of uranium on the layered double hydroxides. In batch experiments, the composite exhibited good uranium removal performance, including high adsorption capacity (687.3 mg/g), strong anti-interference and good reusability (the removal percentage was still higher than 90 % after five cycles). At low initial uranium concentration, the uranium removal percentage on the composite exceeded 99.7 % and the residual concentration of uranium in the solution was <0.03 mg/L, reaching the limited standard of the World Health Organization. The studies of adsorption kinetics and isotherm indicated that the uranium adsorption behavior on the composite conformed to the pseudo-second-order kinetic and Langmuir isotherm models, suggesting that the process was a monolayer adsorption dominated by chemical adsorption. Furthermore, the high-efficiency uranium adsorption on the Mg(Ca)Al layered double hydroxide was mainly attributed to the strong complexation between the active sites (-OH and -NH₂) and uranium, the precipitation of interlayer intercalation ions (CO₃^2- and OH^-) to uranium and the ion exchange of Ca²⁺ to uranium. Due to these advantages, the dopamine-supported Mg(Ca)Al layered double hydroxide composite is expected to be used as fine adsorbent to remove uranium from wastewater.

Preparation of biochar@chitosan-polyethyleneimine for the efficient removal of uranium from water environment

A novel chitosan-based composite with rich active sites was synthesized by uniformly dispersing biochar into the cross-linked network structure formed by chitosan and polyethyleneimine. Due to the synergistic effect of biochar (minerals) and chitosan-polyethyleneimine interpenetrating network (amino and hydroxyl), the chitosan-based composite possessed an excellent adsorption performance for uranium(VI). It could rapidly (<60 min) achieve a high adsorption efficiency (96.7 %) for uranium(VI) from water and a high static saturated adsorption capacity (633.4 mg/g), which was far superior to other chitosan-based adsorbents. Moreover, the separation for uranium(VI) on the chitosan-based composite was suitable for a variety of actual water environments and the adsorption efficiencies all exceeded 70 % in different water bodies. The soluble uranium(VI) could be completely removed by the chitosan-based composite in the continuous adsorption process, which could meet the permissible limits of the World Health Organization. In sum, the novel chitosan-based composite could overcome the bottleneck of current chitosan-based adsorption materials and become a potential adsorbent for the remediation of actual uranium(VI) contaminated wastewater.

Electrochemical conversion of CO2 using metal-organic framework catalysts

Metal-organic frameworks (MOFs) have been an excellent platform for carbon dioxide reduction reactions (CO₂RR). In this work, the feasibility of electrochemical reduction of CO₂ to obtain C₂-deep value-added products was investigated by the preparation of Mg-containing MOF-74 samples combined with transition metal cations (Ni²⁺, Co²⁺ and Zn²⁺). The prepared MOFs were used as electrocatalysts in CO₂RR. Chronoamperometric analysis coupled to ATR-FTIR spectroscopy was employed to characterize the CO₂ reduction products and subsequently via ¹H NMR. Although an isostructural crystalline structure was observed in all synthesized MOFs, the pore diameter distribution was significantly affected due to the Mg coordination along with each transition metal nuclei with the organic ligand to form the MOF-74. Our results showed that Mg-containing MOF-74 electrocatalysts combined with Ni, Co and Zn ions successfully reduced CO₂ to C₂-deep products, while the monometallic Mg-MOF-74 showed only CO₂ mineralization. An ester acetate, isopropyl alcohol, and formic acid were produced by Mg/Ni-MOF-74; isopropyl alcohol was provided by Mg/Co-MOF-74, and ethanol was generated by Mg/Zn-MOF-74. We observed that the change of the transition cation was a key factor in the selectivity of the obtained products, while the degree of Mg ions effectively incorporated into the MOF structure tuned the porosity and the electrocatalytic activity. Among them, Mg/Zn-MFOF-74 showed the highest Mg content loaded after synthesis and thus the most favorable electrocatalytic behavior towards CO₂ reduction.

Design of ion-imprinted cellulose-based microspheres for selective recovery of uranyl ions

Herein, cellulose was selected as the raw material for the production of sorbent microspheres for the selective separation of uranyl (UO₂²⁺) ions by ion-imprinting technique due to their low cost, biodegradability, and renewability. To begin, an amidoxime cellulosic derivative (AOCE) is synthesized by a Michael addition followed by an amidoximation reaction, both of which are homogeneous reactions. In the end, microspheres of ion-imprinted U-AOCE sorbent were made by mixing the developed AOCE derivative with UO₂²⁺, crosslinking the UO₂²⁺ polymer complex with glyoxal, and eluting the coordinated ions with H⁺/EDTA. U-AOCE smartly recognized the target ions for fitting the cavities generated during the UO₂²⁺-imprinting process, resulting in a much greater adsorption capacity of 382 ± 1 mg/g and enhanced adsorption selectivity for UO₂²⁺. A pseudo-second-order model fit the data well in terms of kinetics, while the Langmuir model adequately explained the isotherms, indicating chemisorption and adsorption via UO₂²⁺ chelation. The coordination between UO₂²⁺ and both the -NH₂ and -OH groups of the amidoxime units is the primary adsorption process, as shown by NMR, XPS, and FTIR studies. For UO₂²⁺ biosorption from aqueous effluents, the results of this study deliver new guidance for the design of biosorbents with high removal capability and excellent selectivity.

Selective removal of uranyl ions using ion-imprinted amino-phenolic functionalized chitosan

The recovery of uranium from aqueous effluents is very important for both the environment and the future of nuclear power. However, issues of sluggish rates and poor selectivity persist in achieving high-efficiency uranium extraction. In this study, uranyl (UO₂²⁺) ions were imprinted on an amino-phenolic chitosan derivative using an ion-imprinting method. First, 3-hydroxy-4-nitrobenzoic acid (HNB) units were joined to chitosan via amide bonding, followed by reducing the -NO₂ residues into -NH₂. The amino-phenolic chitosan polymer ligand (APCS) was coordinated with UO₂²⁺ ions, then cross-linked with epichlorohydrin (ECH), and finally the UO₂²⁺ ions were taken away. When compared to non-imprinted sorbent, the resulting UO₂²⁺ imprinted sorbent material (U-APCS) recognized the target ions preferentially, allowing for much higher adsorption capacities (q_m = 309 ± 1 mg/g) and improved adsorption selectivity for UO₂²⁺. The FTIR and XPS analyses supported the pseudo-second-order model's suggestion that chemisorption or coordination is the primary adsorption mechanism by fitting the data well in terms of kinetics. Also, the Langmuir model adequately explained the isotherms, suggesting UO₂²⁺ adsorption in the form of monolayers. The pH_ZPC value was estimated at around 5.7; thus, the optimum uptake pH was achieved between pHs 5 and 6. The thermodynamic properties support the endothermic and spontaneous nature of UO₂²⁺ adsorption.

Evaluation of a graphitic porous carbon modified with iron oxides for atrazine environmental remediation in water by adsorption

In the last decades, the growth of world agricultural activity has significantly contributed to the increased presence of emerging pollutants such as atrazine (ATZ) in aquatic ecosystems. Due to its high stability to the natural or artificial degradation processes, the ATZ environmental remediation by adsorption has been investigated. In this study, a graphitic-porous-carbon- (GPC) based material with magnetic domains was applied to remove ATZ from aqueous solution. ATZ high adsorption efficiency in a reduced time was achieved in the presence of the GPC adsorbent, leading to a detailed investigation of the mechanisms involved in the adsorption processes. Pseudo-first-order (PFO), pseudo-second-order (PSO), Ritchie, Elovich, and Weber-Morris models were applied to calculate the kinetic process efficiency. Likewise, adsorption isotherms based on Langmuir, Freundlich, Temkin, and Redlich-Peterson models were applied for a detailed understanding of the adsorption mechanisms. GPC was successfully applied for ATZ remediation in natural waters, confirming its high potential for treating natural waters contaminated by ATZ using adsorption process. The material can also be recovered and reused for up to 4 application cycles due to its magnetic properties, showing that in addition to ATZ adsorption efficiency, its sustainable use can be achieved.

Self-cleaning and regenerable nano zero-valent iron modified PCN-224 heterojunction for photo-enhanced radioactive waste reduction

The expansion of large-scale nuclear power causes a substantial volume of radioactive wastewater containing uranium to be released into the environment. Because of uranium's toxicity and bioaccumulation, it is critical to develop the efficient and sustainable materials for selective removal of uranium (VI). Herein, a regenerable anti-biofouling nano zero-valent iron doped porphyrinic zirconium metal-organic framework (NZVI@PCN-224) heterojunction system was successfully fabricated. Due to the Schottky-junction effect at the NZVI/MOF interface, the NZVI nanomaterial immobilized on PCN-224 could improve interfacial electron transfer and separation efficiency, and enhance entire reduction of highly soluble U(VI) to less soluble U(IV), involving photocatalytic reduction and chemical reduction. Meanwhile, the photocatalytic effect also prompts the NZVI@PCN-224 to produce more biotoxic reactive oxygen species (ROS), resulting in high anti-microbial and anti-algae activities. Under dark conditions, NZVI@PCN-224 with a large specific surface area could provide sufficient oxo atoms as the uranium binding sites and show the highest uranium-adsorbing capability of 57.94 mg/g at pH 4.0. After eight adsorption-desorption cycles, NZVI@PCN-224 still retained a high uranium adsorption capacity of 47.98 mg/g and elimination efficiency (91.72%). This sorption/reduction/anti-biofouling synergistic strategy of combining chelation, chemical reduction and photocatalytic performance inspires new insights for highly efficient treatment of liquid radioactive waste.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

A critical and recent developments on adsorption technique for removal of heavy metals from wastewater-A review

This review provides a quantitative description of the nano-adsorbent processing and its viability against wastewater detoxification by extracting heavy metal ions. The impact of nano-adsorbent functionalities on specific essential attributes such as the surface area, segregation, and adsorption capacity were comprehensively evaluated. A detailed analysis has been presented on the characteristics of nanomaterials through their limited resistance to adsorb some heavy metal ions. Experimental variables such as the adsorbent dosage, pH, substrate concentration, response duration, temperature, and electrostatic force that influence the uptake of metal ions have been studied. Besides, separate models for the adsorption kinetics and isothermal adsorption have been investigated to understand the mechanism behind adsorption. Here, we reviewed the different adsorbent materials with nano-based techniques for the removal of heavy metals from wastewater and especially highlighted the nano adsorption technique. The influencing factors such as pH, temperature, dosage time, sorbent dosage, adsorption capacities, ion concentration, and mechanisms related to the removal of heavy metals by nano composites are highlighted. Lastly, the application potentials and challenges of nano adsorption for environmental remediation are discussed. This critical review would benefit engineers, chemists, and environmental scientists involved in the utilization of nanomaterials for wastewater treatment.

A critical review of uranium contamination in groundwater: Treatment and sludge disposal

Dissolved uranium in groundwater at high concentrations is an emerging global threat to human and ecological health due to its radioactivity and chemical toxicity. Uranium can enter groundwater by geochemical reactions, natural deposition from minerals, mining, uranium ore processing, and spent fuel disposal. Although much progress has been made in uranium remediation in recent years, most published reviews on uranium treatment have focused on specific methods, particularly adsorption. This article systematically reviews the major treatment technologies, explains their mechanism and progress of uranium removal, and compares their performance under various environmental conditions. Of all treatment methods, adsorption has received much attention due to its ease of use and adaptability under various conditions. However, salinity and competition from other ions limit its application in actual field conditions. Biosorption and bioremediation are also promising methods due to their low-cost and chemical-free operation. Strong base anion exchange resins are more effective at typical groundwater pH conditions. Advanced oxidation processes like photocatalysis produce less sludge and are effective even at low uranium concentrations. Electrocoagulation shows significantly improved performance when organic ligands are added prior to treatment. The significant advantages of membrane filtration are high removal efficiency and the ability to recover uranium. While each technology has its merits and demerits, no single technology is entirely suitable under all conditions. One major area of concern with all technologies is the need to dispose of liquid and solid waste generated after treatment safely. Future research must focus on developing hybrid and state-of-the-art technologies for effective and sustainable uranium removal from groundwater. Developing holistic management strategies for uranium removal will hinge on understanding its speciation, mechanisms of fate and transport, and socio-economic conditions of the affected areas.

Modification of sludge-based biochar using air roasting-oxidation and its performance in adsorption of uranium(VI) from aqueous solutions

Modification methods for sludge-based biochar are often complex and generally ineffective. In this study, sludge-based biochars were prepared at low cost using a simple air roasting-oxidation modification method and the adsorption performance on U(VI) was investigated. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) results together indicated that more carbon-oxygen functional groups were formed on the surface of oxidized biochar (OBC) compared to unoxidized biochar (BC). The adsorption performance of 550-OBC (biochar oxidized at 550 °C) on U(VI) was explored in batch experiments. The maximum adsorption capacity was up to 490.2 mg/g at 25 °C and pH 6, exceeding most of the reported biochars. 550-OBC also showed good adsorption performance at low U(VI) concentration, with 96% removal at pH 6 and an initial U(VI) concentration of 1 mg/L. Density functional theory (DFT) calculations indicated that the H-bond length between the solvated U(VI) and functional groups on the OBC was about 1.7 Å, which forms stronger H-bonds between them compared to that between U(VI) and BC (4.21 Å), and the adsorption energy value for this complex was highly negative -31.82 kcal/mol. In addition, 550-OBC exhibited high selectivity for U(VI) adsorption and excellent regeneration performance, making it a cost-effective and high-performance adsorbent.

Covalent organic frameworks functionalized electrodes for simultaneous removal of UO22+ and ReO4- with fast kinetics and high capacities by electro-adsorption

The recovery of radioactive ions from high salinity low-level radioactive wastewater (LLRW) is important for the sustainable utilization of nuclear energy. Previous work primarily focuses on developing adsorbents that remove individual types of ions via physicochemical adsorption. Here, we report a new strategy for the simultaneous recovery of uranium (UO₂²⁺) and rhenium (ReO₄^-) as a non-radioactive surrogate of technetium from LLRW via electro-adsorption. Carboxyl functionalized covalent organic frameworks (COF-1) and cationic covalent organic frameworks (COF-2) were prepared as cathode and anode materials, respectively. The adsorption capacities were 411 mg U/g for COF-1 and 984 mg Re/g for COF-2 under 1.2 direct-current (DC) volts, 2.5 and 2.1 times higher than the capacities of the same adsorbents obtained by physicochemical adsorption. We also found that the electro-adsorption of uranium and rhenium follows pseudo-second-order kinetics with the adsorption rates of 0.45 and 1.05 g/mg/h at pH 7.0 and 298.15 K, again two times faster than those measured in physicochemical adsorption. Therefore, electro-adsorption improves both adsorption capacity and kinetics by maximizing the utility of available active sites in adsorbents and facilitating ion migration towards the adsorbents. The adsorption efficiencies for uranium and rhenium reached 65.9% and 89.2%, respectively, after electro-adsorption for 2 h. The high efficiencies can be maintained after five adsorption-desorption cycles. Furthermore, the electrodes showed high selectivity for uranium(VI) and rhenium(VII) and excellent salt resistance even in 1 mol/L NaCl solution. XPS studies revealed that covalent bonds were formed between uranium(VI) and carboxyl groups on COF-1, and rhenium(VII) was bound to cationic COF-2 through electrostatic interaction. Our asymmetric electrodes design can be extended to simultaneously and efficiently remove other types of radioactive or heavy metal ions from wastewater.

Metal-Organic Framework-Based Materials for Adsorption and Detection of Uranium(VI) from Aqueous Solution

The steady supply of uranium resources and the reduction or elimination of the ecological and human health hazards of wastewater containing uranium make the recovery and detection of uranium in water greatly important. Thus, the development of effective adsorbents and sensors has received growing attention. Metal-organic frameworks (MOFs) possessing fascinating characteristics such as high surface area, high porosity, adjustable pore size, and luminescence have been widely used for either uranium adsorption or sensing. Now pertinent research has transited slowly into simultaneous uranium adsorption and detection. In this review, the progress on the research of MOF-based materials used for both adsorption and detection of uranium in water is first summarized. The adsorption mechanisms between uranium species in aqueous solution and MOF-based materials are elaborated by macroscopic batch experiments combined with microscopic spectral technology. Moreover, the application of MOF-based materials as uranium sensors is focused on their typical structures, sensing mechanisms, and the representative examples. Furthermore, the bifunctional MOF-based materials used for simultaneous detection and adsorption of U(VI) from aqueous solution are introduced. Finally, we also discuss the challenges and perspectives of MOF-based materials for uranium adsorption and detection to provide a useful inspiration and significant reference for further developing better adsorbents and sensors for uranium containment and detection.

A conveniently synthesized redox-active fluorescent covalent organic framework for selective detection and adsorption of uranium

Uranium is a key element in the nuclear industry and also a global environmental contaminant with combined highly toxic and radioactive. Currently, the materials based on post-modification of amidoxime have been developed for uranium detection and adsorption. However, the affinity of amidoxime group for vanadium is stronger than that of uranium, which is the main challenge hindering the practical application of amidoxime-based adsorbents. Herein, we synthesized a fluorescent covalent organic framework (TFPPy-BDOH) through integrating biphenyl diamine and pyrene unit into the π-conjugated framework. TFPPy-BDOH has an excellent selectivity to uranium due to the synergistic effect of nitrogen atom in the imine bond and hydroxyl groups in conjugated framework. It can achieve ultra-fast fluorescence response time (2 s) and ultra-low detection limit (8.8 nM), which may be attributed to its intrinsic regular porous channel structures and excellent hydrophilicity. More excitingly, TFPPy-BDOH can chemically reduce soluble U (VI) to insoluble U (IV), and release the binding site to adsorb additional U (VI), achieving high adsorption capacity of 982.6 ± 49.1 mg g^-1. Therefore, TFPPy-BDOH can overcome the challenges faced by current amidoxime-based adsorbents, making it as a potential adsorbent in practical applications.

Efficient uranium adsorbent with antimicrobial function constructed by grafting amidoxime groups on ZIF-90 via malononitrile intermediate

Herein, a dual-function Zeolitic Imidazole Frameworks (ZIFs) ZIF-90 grafted with malononitrile by Knoevenagel reaction and following with an amidoximation reaction to form an efficient U (VI) adsorbent (ZIF-90-AO). The strong chelation power of amidoxime groups (AO) with uranium and ZIF-90's mesoporous structure afforded ZIF-90-AO high maximum uranium adsorption capacity of 468.3 mg/g (pH = 5). In addition, the factors affecting uranium adsorption process were investigated by a batch of adsorption tests under different adsorption conditions. ZIF-90-AO displayed good selectivity to UO₂²⁺ in the solution containing multiple co-existing ions and good regeneration property. More importantly, ZIF-90-AO showed excellent antimicrobial property against both E. coli and S. aureus. Therefore, ZIF-90-AO is a U-adsorbent with great application value for removing U (VI) from wastewater due to the high U (VI) adsorption capacity in weak acid condition and good anti-biofouling properties.

Facile One-Pot Synthesis of Zn/Mg-MOF-74 with Unsaturated Coordination Metal Centers for Efficient CO2 Adsorption and Conversion to Cyclic Carbonates

Bimetallic metal-organic frameworks (MOFs) containing two different inorganic metal nodes exhibited enhanced properties in CO₂ adsorption and catalytic conversion compared with the corresponding monometallic MOFs. In this work, the novel bimetallic Zn/Mg-MOF-74 with different ratios of Zn/Mg was synthesized successfully by a facile one-pot method. Powder X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy, scanning electron microscopy/transmission electron microscopy, N₂/CO₂ adsorption/desorption, and CO₂/NH₃-temperature-programmed desorption techniques thoroughly characterized the structure, morphology, and physicochemical properties of Zn/Mg-MOF-74. Besides the excellent CO₂ adsorption capacity (128.3 cm³/g at 273 K and 1 bar), Zn_0.75Mg_0.25-MOF-74 also showed efficient catalytic activity for the cycloaddition reaction of CO₂ and epoxides to cyclic carbonates with outstanding yield and selectivity all over 99% under solvent-free and mild conditions (60 °C, 0.8 MPa), outperforming the mechanical combination of Zn-MOF-74 and Mg-MOF-74 with the same metal contents, indicating the synergistic effect of two adjacent metals in bimetallic MOF-74. In addition, the Zn_0.75Mg_0.25-MOF-74 catalyst could be recycled for at least five runs and possess good versatility to various substrates. Finally, a feasible mechanism of the catalytic reaction was proposed. Thanks to the high surface area, affinity toward CO₂, and accessibility of multiple active sites of the unsaturated metal centers as active Lewis acid sites and O atoms from Zn-O and Mg-O as Lewis basic sites, efficient chemical fixation of CO₂ to cyclic carbonates was obtained over the Zn_0.75Mg_0.25-MOF-74 catalyst. The present facile synthesis and application of a robust bimetallic MOF catalyst offered a competitive avenue for the integration of CO₂ adsorption and CO₂ catalytic conversion.

Applications of water-stable metal-organic frameworks in the removal of water pollutants: A review

Because the pollutants produced by human activities have destroyed the ecological balance of natural water environment, and caused severe impact on human life safety and environmental security. Hence the task of water environment restoration is imminent. Metal-organic frameworks (MOFs), structured from organic ligands and inorganic metal ions, are notable for their outstanding crystallinity, diverse structures, large surface areas, adsorption performance, and excellent component tunability. The water stability of MOFs is a key requisite for their possible actual applications in separation, catalysis, adsorption, and other water environment remediation areas because it is necessary to safeguard the integrity of the material structure during utilization. In this article, we comprehensively review state-of-the-art research progress on the promising potential of MOFs as excellent nanomaterials to remove contaminants from the water environment. Firstly, the fundamental characteristics and preparation methods of several typical water-stable MOFs include UiO, MIL, and ZIF are introduced. Then, the removal property and mechanism of heavy metal ions, radionuclide contaminants, drugs, and organic dyes by different MOFs were compared. Finally, the application prospect of MOFs in pollutant remediation prospected. In this review, the synthesis methods and application in water pollutant removal are explored, which provide ways toward the effective use of water-stable MOFs in materials design and environmental remediation.

Preparation of ZnNiAl-LDHs microspheres and their adsorption behavior and mechanism on U(VI)

Ternary zinc-nickel-aluminum hydrotalcites (ZnNiAl-LDHs) were prepared by hydrothermal synthesis. The structure and morphology of the materials were characterized using X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), nitrogen adsorption-desorption (BET) and other test techniques. ZnNiAl-LDHs was applied in the treatment of uranium-containing wastewater, the effects of initial pH of the solution, adsorption temperature and contact time on its adsorption performance were systematically investigated, and the adsorption performance of ZnNiAl-LDHs and ZnAl-LDHs on uranyl ions were compared. The result showed that ZnNiAl-LDHs were 3D microspheres self-assembled from flakes, with a specific surface area of 102.02 m²/g, which was much larger than that of flake ZnAl-LDHs (18.49 m²/g), and the saturation adsorption capacity of ZnNiAl-LDHs for uranyl ions (278.26 mg/g) was much higher than that of ZnAl-LDHs for uranyl ions (189.16 mg/g), so the ternary ZnNiAl-LDHs had a more excellent adsorption capacity. In addition, kinetic and thermodynamic studies showed that the adsorption process of ZnNiAl-LDHs on uranyl ions conformed to the pseudo-second-order kinetic model and Langmuir isotherm model. The positive value of ΔH and the negative value of ΔG indicated that the adsorption process was endothermic and spontaneous. The adsorption mechanism was analyzed by X-ray energy spectroscopy (EDS), fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The results showed that the adsorption of uranyl ions by ZnNiAl-LDHs mainly consisted of complexation and ion substitution. The research results prove that ZnNiAl-LDHs is an adsorbent with low cost and excellent performance, and it has a good application prospect in the field of uranium-containing wastewater treatment.

Fabrication of Dexamethasone-Loaded Dual-Metal-Organic Frameworks on Polyetheretherketone Implants with Bacteriostasis and Angiogenesis Properties for Promoting Bone Regeneration

Polyetheretherketone (PEEK) is a biocompatible polymer, but its clinical application is largely limited due to its inert surface. To solve this problem, a multifunctional PEEK implant is urgently fabricated. In this work, a dual-metal-organic framework (Zn-Mg-MOF74) coating is bonded to PEEK using a mussel-inspired polydopamine interlayer to prepare the coating, and then, dexamethasone (DEX) is loaded on the coating surface. The PEEK surface with the multifunctional coating provides superior hydrophilicity and favorable stability and forms an alkaline microenvironment when Mg²⁺, Zn²⁺, 2,5-dihydroxyterephthalic acid, and DEX are released due to the coating degradation. In vitro results showed that the multifunctional coating has strong antibacterial ability against both Escherichia coli and Staphylococcus aureus; it also improves human umbilical vein endothelial cell angiogenic ability and enhances rat bone marrow mesenchymal stem cell osteogenic differentiation activity. Furthermore, the in vivo rat subcutaneous infection model, chicken chorioallantoic membrane model, and rat femoral drilling model verify that the PEEK implant coated with the multifunctional coating has strong antibacterial and angiogenic ability and promotes the formation of new bone around the implant with a stronger bone-implant interface. Our findings indicate that DEX loaded on the Zn-Mg-MOF74 coating-modified PEEK implant with bacteriostasis, angiogenesis, and osteogenesis properties has great clinical application potential as bone graft materials.

High-performance removal of radionuclides by porous organic frameworks from the aquatic environment: A review

Dealing with unwanted nuclear waste is still a serious issue from the point of view of humans and the environment because of its harmful and dangerous effects. Recently, porous organic frameworks (POFs) have gained an increasing concern as effective materials in the removal of various types of hazardous metal ions, especially radioactive metal ions. POFs are a unique class that included covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) with strong covalent bonds, large surface area, high adsorption capacity, tunable porosity, and a porous structure with more efficient than conventional adsorbents. This review highlights the recent developments of POFs for the rapid elimination of radionuclide. The unique characteristics, adsorption properties, and interaction mechanisms between radioactive metal ions and the POF-based materials are summarized. Also, prospects for enhancing the performance of POFs to capture radioactive metal ions are discussed.

Acid resistant functionalised magnetic nanoparticles for radionuclide and heavy metal adsorption

Coating superparamagnetic iron oxide NPs with SiO₂ has been established in order to confer stability in acidic media. Acid stability tests were carried out between pH 1 and pH 7 to determine the effectiveness of the SiO₂ passivating layer to protect the magnetic Fe₃O₄ core. Transmission Electron Microscopy (TEM) and zeta potential measurements have shown that uncoated Fe₃O₄ NPs exhibit rapid agglomeration and dissolution when exposed to acidic media, moving from a zeta potential of - 26 mV to a zeta potential of + 3 mV. In contrast, the SiO₂ coating of the Fe₃O₄ NPs shows a very high degree of stability for over 14 months and the zeta potential of these NPs remained at ∼- 39 mV throughout the acid exposure and they showed no loss in magnetisaton. Due to the use of these NPs as a potential tool for heavy metal extraction, the stability of the surface functionalisation (in this case a phosphate complex) was also assessed. With a constant zeta potential of ∼ - 29 mV for PO_x-SiO₂@Fe₃O₄ NP complex, the phosphate functionality was shown to be highly stable in the acidic conditions simulating the environment of certain nuclear wastes. ATR-FTIR was conducted after acid exposure confirming that the phosphate complex on the surface of the NPs remained present. Finally, preliminary sorption experiments were carried out with Pb(II), where the NP complexes shown complete removal of the heavy metals at pH 3 and pH 5.