Effect of vitamin-E integration on delivery of prostaglandin analogs from therapeutic lenses

In Situ Gelling Eye Drops of Tacrolimus with Improved Ocular Delivery and Therapeutic Efficacy

In situ gelling eye drops of tacrolimus (FK506 Gel) were developed to address the formulation challenge of tacrolimus for anterior ocular inflammatory diseases. Both in silico and in vitro investigations were conducted to screen a suitable cyclodextrin species to increase the drug solubility. Guanosine was employed as the gelator and combined with inclusion complexes of tacrolimus in the presence of borate anions to obtain FK506 Gel, which gelated when came into contact with cations in tear fluid and led to the formation of a nanofibrous hydrogel. The versatility of our design to improve the solubility and ocular retention of the hydrophobic drug was demonstrated in vivo with coumarin 6 as a model drug. A mouse dry eye model was used to evaluate the therapeutic effects of FK506 Gel, which, in combination with the biocompatibility study, suggested that FK506 Gel served as a superior treatment for anterior ocular inflammatory diseases.

Extended release of ciprofloxacin from commercial silicone-hydrogel and conventional hydrogel contact lenses containing vitamin E diffusion barriers

SIGNIFICANCE

Vitamin E could be used as a coating with commercial silicone hydrogel lenses to extend the release of various ophthalmic drugs. This concept could provide a promising approach to improve overall ocular therapeutic outcomes for topical ocular drugs.

PURPOSE

This study aimed to develop a contact lens-based ocular drug delivery system using vitamin E as a diffusion barrier to extend the release duration of ciprofloxacin.

METHODS

Five commercial lenses were soaked for 24 hours in various concentrations of vitamin E dissolved in ethanol (0.0125 to 0.2 g/mL). The lenses were loaded with ciprofloxacin for 24 hours in 3 mL of 3 mg/mL of ciprofloxacin/acetic acid solution. The drug release was evaluated in 3 mL of phosphate-buffered saline solution. At t = 0.5, 1, 2, 4, 6, 8, 12, 16, and 24 hours, the amount of ciprofloxacin released was measured using a UV-VIS spectrophotometer at 270 nm.

RESULTS

There was a decrease in ciprofloxacin loading with increasing amounts of vitamin E loaded into the silicone hydrogel lenses. For each lens type, there was an optimal amount of vitamin E loaded that extended the release duration of the drug from 1 hour (without vitamin E) to as long as 16 hours. In contrast, vitamin E loaded into hydrogel lenses had no effect on the amounts of drugs loaded or the release duration.

CONCLUSIONS

Vitamin E can be used as a diffusion barrier with commercially available silicone hydrogel lenses to provide sustained release of ciprofloxacin. The results suggest that vitamin E may form blockages in channels within a silicone hydrogel lens material, thereby forcing a longer path for drugs to diffuse into and out of the lens material. There is an optimal amount of vitamin E that needs to be loaded to extend the release duration, and this is lens material dependent.

Oleogels: Versatile Novel Semi-Solid System for Pharmaceuticals

Oleogels is a novel semi-solid system, focusing on its composition, formulation, characterization, and diverse pharmaceutical applications. Due to their stability, smoothness, and controlled release qualities, oleogels are frequently utilized in food, cosmetics, and medicinal products. Oleogels are meticulously formulated by combining oleogelators like waxes, fatty acids, ethyl cellulose, and phytosterols with edible oils, leading to a nuanced understanding of their impact on rheological characteristics. They can be characterized by methods like visual inspection, texture analysis, rheological measurements, gelation tests, and microscopy. The applications of oleogels are explored in diverse fields such as nutraceuticals, cosmetics, food, lubricants, and pharmaceutics. Oleogels have applications in topical, transdermal, and ocular drug delivery, showcasing their potential for revolutionizing drug administration. This review aims to enhance the understanding of oleogels, contributing to the evolving landscape of pharmaceutical formulations. Oleogels emerge as a versatile and promising solution, offering substantial potential for innovation in drug delivery and formulation practices.

From Eye Care to Hair Growth: Bimatoprost

BACKGROUND

Bimatoprost has emerged as a significant medication in the field of medicine over the past several decades, with diverse applications in ophthalmology, dermatology, and beyond. Originally developed as an ocular hypotensive agent, it has proven highly effective in treating glaucoma and ocular hypertension. Its ability to reduce intraocular pressure has established it as a first-line treatment option, improving management and preventing vision loss. In dermatology, bimatoprost has shown promising results in the promotion of hair growth, particularly in the treatment of alopecia and hypotrichosis. Its mechanism of action, stimulating the hair cycle and prolonging the growth phase, has led to the development of bimatoprost-containing solutions for enhancing eyelash growth.

AIM

The aim of our review is to provide a brief description, overview, and studies in the current literature regarding the versatile clinical use of bimatoprost in recent years. This can help clinicians determine the most suitable individualized therapy to meet the needs of each patient.

METHODS

Our methods involve a comprehensive review of the latest advancements reported in the literature in bimatoprost formulations, which range from traditional eye drops to sustained-release implants. These innovations offer extended drug delivery, enhance patient compliance, and minimize side effects.

RESULTS

The vast literature published on PubMed has confirmed the clinical usefulness of bimatoprost in lowering intraocular pressure and in managing patients with glaucoma. Numerous studies have shown promising results in dermatology and esthetics in promoting hair growth, particularly in treating alopecia and hypotrichosis. Its mechanism of action involves stimulating the hair cycle and prolonging the growth phase, leading to the development of solutions that enhance eyelash growth. The global use of bimatoprost has expanded significantly, with applications growing beyond its initial indications. Ongoing research is exploring its potential in glaucoma surgery, neuroprotection, and cosmetic procedures.

CONCLUSIONS

Bimatoprost has shown immense potential for addressing a wide range of therapeutic needs through various formulations and advancements. Promising future perspectives include the exploration of novel delivery systems such as contact lenses and microneedles to further enhance drug efficacy and patient comfort. Ongoing research and future perspectives continue to shape its role in medicine, promising further advancements and improved patient outcomes.

Novel Drug Delivery Systems for the Management of Fungal Keratitis

Fungal keratitis (FK) is a dangerous corneal infection that is common in tropical and subtropical areas. Its incidence is extremely high, and ocular trauma and contact lenses can lead to FK, but its common treatment such as using topical antifungal eye drop instillation is often less effective because of several drawbacks of the drugs typically used, including limited ocular penetration, high frequency of dosing, poor biocompatibility, and the potential for severe drug reactions. Therefore, the development of novel drug delivery devices for the treatment of FK is urgent. The urgent need for novel drug delivery devices to treat FK has led to the development of several techniques, including nanoparticles (NPs), in situ forming hydrogels, contact lenses, and microneedles (MNs). However, it is important to note that the main mechanisms differ between these techniques. NPs can transport large amounts of drugs and be taken up by cells owing to their large surface area and small size. In situ forming hydrogels can significantly extend the residence time of drugs because of their strong adhesive properties. Contact lenses, with their comfortable shape and drug-carrying capacity, can also act as drug delivery devices. MNs can create channels in the cornea, bypassing its barrier and enhancing drug bioavailability. This article will go over novel medication delivery techniques for treating FK and make a conclusion about their advantages and limitations in anticipation to serve the best option for the individual therapy of FK.

Sustained Delivery of Olopatadine from Vitamin-E Loaded Contact Lenses

Purpose: Topical antihistamines, such as olopatadine hydrochloride, an H1 receptor antagonist, are commonly prescribed for treating allergic conjunctivitis. Drug delivery via eye drops has many deficiencies including a short residence time due to tear drainage via the nasolacrimal duct, which results in a low bioavailability and potential for side effects. These deficiencies could be mitigated by a drug-eluting contact lens such as the recently approved ACUVUE® THERAVISION™ WITH KETOTIFEN which is a daily disposable etafilcon, a drug-eluting contact lens with ketotifen (19 μg per lens). Here, we investigate the feasibility of designing a drug-eluting lens with sustained release of olopatadine for treating allergies using an extended wear lens. Methods: Nanobarrier depots composed of vitamin-E (VE) are formed through direct entrapment by ethanol-driven swelling. The drug-loaded lenses are characterized for transparency and water content. In vitro release is measured under sink conditions and fitted to a diffusion control release model to determine diffusivity and partition coefficient. Results: In vitro studies indicate that ACUVUE OASYS® and ACUVUE TruEye™ lenses loaded with ∼0.3 g of VE/g of hydrogel effectively prolong olopatadine dynamics by 7-fold and 375-fold, respectively. Incorporation of VE into the lenses retains visible light transmission and other properties. Conclusion: The VE incorporation in commercial lenses significantly increases the release duration offering the possibility of antiallergy extended wear lenses.

Recent advancements in nanomaterial-laden contact lenses for diagnosis and treatment of glaucoma, review and update

Despite the existence of numerous eye drops in the market, most of them are not sufficiently effective because of quick clearance and the barriers within the eye. To increase the delivery of the drugs to the eye, various new formulations have been explored in recent decades. These formulations aim to enhance drug retention and penetration, while enabling sustained drug release over extended periods. One such innovative approach is the utilization of contact lenses, which were originally designed for cosmetic purposes and vision correction. Contact lenses have appeared as a promising formulation for ocular drug delivery, as they can increase the bioavailability of drugs in the eye and diminish unwanted side effects. They are specifically appropriate for treating chronic eye conditions, making them an area of interest for researchers in the field of ophthalmology. This review outlines the promising potential of nanomaterial-laden contact lenses for diagnosis and treatment of glaucoma. It classifies therapeutic approaches based on nanomaterial type, summarizes diagnostic advances, discusses improvement of contact lenses properties, covers marketing perspectives, and acknowledges the challenges of these innovative contact lenses for glaucoma management.

Technological Advances in a Therapy of Primary Open-Angle Glaucoma: Insights into Current Nanotechnologies

Glaucoma is a leading cause of irreversible blindness and is characterized by increased intraocular pressure (IOP) and progressive optic nerve damage. The current therapeutic approaches for glaucoma management, such as eye drops and oral medications, face challenges including poor bioavailability, low patient compliance, and limited efficacy. In recent years, nanotechnology has emerged as a promising approach to overcome these limitations and revolutionize glaucoma treatment. In this narrative review, we present an overview of the novel nanotechnologies employed in the treatment of primary open-angle glaucoma. Various nanosystems, including liposomes, niosomes, nanoparticles, and other nanostructured carriers, have been developed to enhance the delivery and bioavailability of antiglaucoma drugs. They offer advantages such as a high drug loading capacity, sustained release, improved corneal permeability, and targeted drug delivery to the ocular tissues. The application of nanotechnologies in glaucoma treatment represents a transformative approach that addresses the limitations of conventional therapies. However, further research is needed to optimize the formulations, evaluate long-term safety, and implement these nanotechnologies into clinical practice. With continued advancements in nanotechnology, the future holds great potential for improving the management and outcomes of glaucoma, ultimately preserving vision and improving the lives of millions affected by this debilitating disease.

A Physiology-Based Mathematical Model to Understand Drug Delivery from Contact Lenses to the Back of the Eye

OBJECTIVE

Therapeutic contact lenses, able to store drug and deliver it to the eye surface in a sustained fashion, gained interest as an effective and patient-friendly alternative to eye drops. Recent animal studies also demonstrated the presence of therapeutic drug levels in the back of the eye after wearing drug-loaded contact lenses, thus opening the possibility of treating the posterior segment without need of invasive intraocular injections. The drug pathways from contact lenses to the back of the eye require further investigation.

METHODS

A mechanistic mathematical model was developed to evaluate the drug concentration over time in the tears, sclera and choroid, retina, aqueous humor and vitreous humor after the application of a therapeutic contact lens. The main drug transport mechanisms of the eye and the barrier properties of the different tissues were included in the model. Validation was performed by comparison with experimental data in literature.

RESULTS

The model predictions of drug concentration over time reflected the experimental data both in the anterior and posterior segment of the eye. The model can differentiate between contributions to transport from different pathways.

CONCLUSIONS

The model constitutes a first step towards the possibility of predicting the ocular drug distribution and the treatment efficacy in the early stage of contact lens development, and it may help reduce both the need for in vivo tests (with ethical and economic advantages) and the gap between the lens design and clinical application. It also allows for an improved understanding of drug transport in the eye.

Review of Potential Drug-Eluting Contact Lens Technologies

The field of ophthalmology is expanding exponentially, both in terms of diagnostic and therapeutic capabilities, as well as the worldwide increasing incidence of eye-related diseases. Due to an ageing population and climate change, the number of ophthalmic patients will continue to increase, overwhelming healthcare systems and likely leading to under-treatment of chronic eye diseases. Since drops are the mainstay of therapy, clinicians have long emphasised the unmet need for ocular drug delivery. Alternative methods, i.e., with better compliance, stability and longevity of drug delivery, would be preferred. Several approaches and materials are being studied and used to overcome these drawbacks. We believe that drug-loaded contact lenses are among the most promising and are a real step toward dropless ocular therapy, potentially leading to a transformation in clinical ophthalmic practice. In this review, we outline the current role of contact lenses in ocular drug delivery, focusing on materials, drug binding and preparation, concluding with a look at future developments.

Nutritional Factors: Benefits in Glaucoma and Ophthalmologic Pathologies

Glaucoma is a chronic optic neuropathy that can lead to irreversible functional and morphological damage if left untreated. The gold standard therapeutic approaches in managing patients with glaucoma and limiting progression include local drops, laser, and/or surgery, which are all geared at reducing intraocular pressure (IOP). Nutrients, antioxidants, vitamins, organic compounds, and micronutrients have been gaining increasing interest in the past decade as integrative IOP-independent strategies to delay or halt glaucomatous retinal ganglion cell degeneration. In our minireview, we examine the various nutrients and compounds proposed in the current literature for the management of ophthalmology diseases, especially for glaucoma. With respect to each substance considered, this minireview reports the molecular and biological characteristics, neuroprotective activities, antioxidant properties, beneficial mechanisms, and clinical studies published in the past decade in the field of general medicine. This study highlights the potential benefits of these substances in glaucoma and other ophthalmologic pathologies. Nutritional supplementation can thus be useful as integrative IOP-independent strategies in the management of glaucoma and in other ophthalmologic pathologies. Large multicenter clinical trials based on functional and morphologic data collected over long follow-up periods in patients with IOP-independent treatments can pave the way for alternative and/or coadjutant therapeutic options in the management of glaucoma and other ocular pathologies.

In vitro-in vivo correlation of drug release profiles from medicated contact lenses using an in vitro eye blink model

There is still a paucity of information on how in vitro release profiles from drug-loaded contact lenses (CLs) recorded in 3D printed eye models correlate with in vivo profiles. This work aims to evaluate the release profiles of two drug-loaded CLs in a 3D in vitro eye blink model and compare the obtained results with the release in a vial and the drug levels in tear fluid previously obtained from an animal in vivo study. In vitro release in the eye model was tested at two different flow rates (5 and 10 µL/min) and a blink speed of 1 blink/10 s. Model CLs were loaded with two different drugs, hydrophilic pravastatin and hydrophobic resveratrol. The release of both drugs was more sustained and lower in the 3D eye model compared to the in vitro release in vials. Interestingly, both drugs presented similar release patterns in the eye model and in vivo, although the total amount of drugs released in the eye model was significantly lower, especially for resveratrol. Strong correlations between percentages of pravastatin released in the eye model and in vivo were found. These findings suggest that the current 3D printed eye blink model could be a useful tool to measure the release of ophthalmic drugs from medicated CLs. Nevertheless, physiological parameters such as the composition of the tear fluid and eyeball surface, tear flow rates, and temperature should be optimized in further studies.

Therapeutic contact lenses for the treatment of corneal and ocular surface diseases: advances in extended and targeted drug delivery

The eye is one of the most important organs in the human body providing critical information on the environment. Many corneal diseases can lead to vision loss affecting the lives of people around the world. Ophthalmic drug delivery has always been a major challenge in the medical sciences. Since traditional methods are less efficient (∼ 5%) at delivering drugs to ocular tissues, contact lenses have generated growing interest in ocular drug delivery due to their potential to enhance drug bioavailability in ocular tissues. The main techniques used to achieve sustained release are discussed in this review, including soaking in drug solutions, incorporating drug into multilayered contact lenses, use of vitamin E barriers, molecular imprinting, nanoparticles, micelles and liposomes. The most clinically relevant results on different eye pathologies are presented. In addition, this review summarizes the benefits of contact lenses over eye drops, strategies for incorporating drugs into lenses to achieve sustained release, results of in vitro and in vivo studies, and the recent advances in the commercialization of therapeutic contact lenses for allergic conjunctivitis.

Industry chain and challenges of microalgal food industry-a review

Currently, the whole world is facing hunger due to the increase in the global population and the rising level of food consumption. Unfortunately, the impact of environmental, climate, and political issues on agriculture has resulted in limited global food resources. Thus, it is important to develop new food sources that are environmentally friendly and not subject to climate or space limitations. Microalgae represent a potential source of nutrients and bioactive components for a wide range of high-value products. Advances in cultivation and genetic engineering techniques provide prospective approaches to widen their application for food. However, there are currently problems in the microalgae food industry in terms of assessing nutritional value, selecting processes for microalgae culture, obtaining suitable commercial strains of microalgae, etc. Additionally, the limitations of real data of market opportunities for microalgae make it difficult to assess their actual potential and to develop a better industrial chain. This review addresses the current status of the microalgae food industry, the process of commercializing microalgae food and breeding methods. Current research progress in addressing the limitations of microalgae industrialization and future prospects for developing microalgae food products are discussed.

Glaucoma Treatment and Hydrogel: Current Insights and State of the Art

Aqueous gels formulated using hydrophilic polymers (hydrogels) and those based on stimuli-responsive polymers (in situ gelling or gel-forming systems) attract increasing interest in the treatment of several eye diseases. Their chemical structure enables them to incorporate various ophthalmic medications, achieving their optimal therapeutic doses and providing more clinically relevant time courses (weeks or months as opposed to hours and days), which will inevitably reduce dose frequency, thereby improving patient compliance and clinical outcomes. Due to its chronic course, the treatment of glaucoma may benefit from applying gel technologies as drug-delivering systems and as antifibrotic treatment during and after surgery. Therefore, our purpose is to review current applications of ophthalmic gelling systems with particular emphasis on glaucoma.

Contact lenses for pravastatin delivery to eye segments: Design and in vitro-in vivo correlations

Oral administration of cholesterol-lowering statins, HMG-CoA reductase inhibitors, is associated with beneficial effects on eye conditions. This work aims to design contact lenses (CLs) that can sustainedly deliver pravastatin and thus improve the ocular efficacy while avoiding systemic side effects of statins. Bioinspired hydrogels were prepared with monomers that resemble hydrophobic (ethylene glycol phenyl ether methacrylate) and amino (2-aminoethyl methacrylamide hydrochloride) functionalities of the active site of HMG-CoA. Best performing CLs loaded >6 mg/g, in vitro fulfilled the release demands for daily wearing, and showed anti-inflammatory activity (lowering TNF-α). High hydrostatic pressure sterilization preserved the stability of both the drug and the hydrogel network. Ex vivo tests revealed the ability of pravastatin to accumulate in cornea and sclera and to penetrate through transscleral route. In vivo tests (rabbits) confirmed that, compared to eye drops and for the same dose, CLs provided significantly higher pravastatin levels in tear fluid within 1 to 7 h of wearing. Moreover, after 8 h wearing pravastatin was present in cornea, sclera, aqueous humour and vitreous humour. Strong correlations between percentages of drug released in vitro and in vivo were found. Effects of volume and proteins on release rate and Levy plots were identified.

In vitro and in vivo evaluation of brimonidine loaded silica nanoparticles-laden silicone contact lenses to manage glaucoma

Glaucoma is treated by frequent instillation of 0.2% w/v brimonidine tartrate eye drop solution, which showed poor ocular bioavailability of 1-3%. Medicated contact lenses can be used to improve the ocular drug bioavailability. However, drug loading in the contact lens matrix showed high burst release and changes the optophysical properties of the contact lens material. In this paper, a novel brimonidine loaded silica nanoparticles-laden silicone contact lenses (Bri-Si) were designed to achieve controlled drug delivery without altering the optophysical properties of the contact lens. Silica nanoparticles were prepared by polymerizing octadecyltrimethoxysilane (OTMS) molecules at the oil/water interface of microemulsion. Traditional soaking method (Bri-SM), direct brimonidine-loading method (Bri-DL) and microemulsion-laden contact lens (Bri-ME) were developed for comparison. The Bri-Si lens showed improved swelling, transmittance, oxygen permeability and lysozyme adherence compared to Bri-SM, Bri-DL and Bri-ME lenses. The Bri-DL lens showed high brimonidine leaching during extraction and sterilization steps, with low cumulative drug release. While, Bri-Si lens show controlled brimonidine release for 144 h. In a rabbit tear fluid model, the Bri-Si lens showed high brimonidine concentration for 96 h compared to Bri-ME lens and eye drop therapy. Based on histopathological studies of cornea, the Bri-Si lens was found to be safe for human applications. The data demonstrated the novel application of silica nanoparticles to control brimonidine release from the contact lens without altering the optophysical properties of the contact lens.

Transport of Vitamin E from Ethanol/Water Solution into Contact Lenses and Impact on Drug Transport

Purpose: Contact lens-based drug delivery has many advantages over eye drops including higher bioavailability and sustained release. Commercial contact lenses release drug rapidly necessitating integration of control-release mechanisms into the lenses such as incorporation of vitamin E diffusion barriers. In prior publications, vitamin E barriers are loaded by placing the lenses in vitamin E-ethanol solution, followed by the ethanol extraction. In this article, we investigate feasibility of manufacturing vitamin E barriers by soaking contact lenses in vitamin E dissolved in ethanol-water solutions to minimize swelling. Methods: Contact lenses are soaked in solutions of vitamin E dissolved in ethanol-water mixtures. The dynamics of vitamin E transport into the measured and fitted to diffusion equation to determine diffusivity and partition coefficient. Vitamin E loaded lenses are imaged and transport of hydrophilic drug timolol is measured. Results: The partition coefficient of vitamin E increases more than 5 and 10-fold when the water content in the loading solution reaches 15% and 25% (v/v), respectively. The solubility of vitamin E in the solutions decreases as water fraction increases but the increase in partition coefficient allows for loading > 20% vitamin E in the lens. The barriers manufactured by this approach are effective at sustaining release of glaucoma drug timolol. Conclusions: Vitamin E barriers can be incorporated into contact lenses by soaking in solutions of vitamin E in water and ethanol. Vitamin E barriers extended hydrophilic drug release and the reduced swelling is beneficial in minimizing the possibility of lens damage during loading of vitamin E.

Bimatoprost-Loaded Silica Shell-Coated Nanoparticles-Laden Soft Contact Lenses to Manage Glaucoma: In Vitro and In Vivo Studies

Currently, glaucoma is managed by frequent instillation of bimatoprost eye drop therapy, which showed very poor ocular bioavailability. Contact lens is widely used as medical device to improve the drug retention on the ocular tissues. However, the traditional methods of drug loading in the contact lens matrix showed high burst release and changes the optophysical properties of the contact lens material. In this paper, a novel bimatoprost-loaded silica shell nanoparticles-laden soft contact lenses were developed to achieve sustain drug delivery without altering the optophysical properties of the contact lens. Silica-shell nanoparticles were prepared using octyltrimethoxysilane (OTMS) and microemulsion. Traditional soaking method (SM-BT), direct bimatoprost loading method (DL-BT), and microemulsion-laden contact lens (ME-BT) were developed for comparison. The silica shell-coated nanoparticles-laden soft contact lenses (SiS-BT) showed improved swelling, transmittance, oxygen permeability, and lysozyme adherence compared to SM-BT, DL-BT, and ME-BT lenses. The DL-BT and ME-BT batch showed high bimatoprost lost/leaching during extraction and sterilization steps, with low cumulative drug release. Also, SiS-BT lens showed sustain bimatoprost release for 96 h. In a rabbit tear fluid model, the SiS-BT lens showed high bimatoprost concentration for 72 h compared to ME-BT lens and eye drop therapy. Based on histopathological studies of cornea, the SiS-BT lens was found to be safe for human applications. The data demonstrated the novel application of silica shell nanoparticles to deliver bimatoprost from the contact lens for extended period of time without altering the optophysical properties of the contact lens.

Reported evidence of vitamin E protection against cataract and glaucoma

Cataract and glaucoma are the major causes of severe visual loss and blindness in older adults. This review article describes the currently available basic and clinical evidence regarding vitamin E protection against these eye diseases in the chronologic order of the publications. Experimental evidence has suggested both that oxidative stress due to the accumulation of free radicals plays a role in the pathogenesis of cataracts and glaucoma and that the process can be prevented or ameliorated by vitamin E. The results of observational studies have been inconsistent regarding the association between blood vitamin E levels and the risk of age-related cataract or glaucoma. Despite the encouraging effects of vitamin E from case series, case-control studies, and cross-sectional studies in humans, the effects on cataract formation and/or progression have not been consistent among prospective and randomized control studies; few randomized control studies have tested the effects of supplemental vitamin E on glaucoma development or progression. Given the high prevalence of cataract and glaucoma in the elderly population, even a modest reduction in the risk for these eye diseases would potentially have a substantial public health impact; however, the potential benefits of vitamin E on cataract or glaucoma remain inconclusive and need to be carefully considered.

Commercial soft contact lenses engineered with zwitterionic silver nanoparticles for effectively treating microbial keratitis

The introduction of various drugs onto commercial soft contact lenses (CLs) has emerged as a potentially effective strategy for treating microbial keratitis (MK) because drug-loaded CLs can maintain a controlled drug concentration which leaded to enhanced drug bioavailability and reduced side effects in ocular tissues. In this study, silver nanoparticles modified with zwitterionic poly (carboxybetaine-co-dopamine methacrylamide) copolymer (PCBDA@AgNPs) as novel anti-infective therapeutics were prepared and firmly immobilized onto soft CLs through mussel-inspired surface chemistry. The obtained PCBDA@AgNPs coated CL (PCBDA@AgNPs-CL) remained the excellent transparency of commercial CLs and exhibited strong and broad-spectrum antimicrobial activities. We systematically explored the mechanism and found that the functional CLs can effectively inhibit the growth of microbial biofilms via a synergic "resist-kill-remove" strategy due to the zwitterionic surface and sustained release of silver ions. Significantly, in vitro cell cytotoxicity and in vivo subcutaneous implantation experiments proved the significant biosafety of PCBDA@AgNPs-CL. Furthermore, PCBDA@AgNPs-CL was successfully employed for the in vivo treatment of MK rabbit models, demonstrating excellent abilities to eradicate microbe-induced ocular infections and to prevent the destruction and irreversible structural alterations of corneal tissues. Collectively, PCBDA@AgNPs-CL is therefore a highly promising therapeutic device to significantly boost the efficacy for MK treatment.

Soft Contact Lenses as Drug Delivery Systems: A Review

This review describes the role of contact lenses as an innovative drug delivery system in treating eye diseases. Current ophthalmic drug delivery systems are inadequate, particularly eye drops, which allow about 95% of the active substance to be lost through tear drainage. According to the literature, many interdisciplinary studies have been carried out on the ability of contact lenses to increase the penetration of topical therapeutic agents. Contact lenses limit drug loss by releasing the medicine into two layers of tears on either side of the contact lens, eventually extending the time of contact with the ocular surface. Thanks to weighted soft contact lenses, a continuous release of the drug over an extended period is possible. This article reviewed the various techniques to deliver medications through contact lenses, examining their advantages and disadvantages. In addition, the potential of drug delivery systems based on contact lenses has been extensively studied.

Controlled bimatoprost release from graphene oxide laden contact lenses: In vitro and in vivo studies

Ocular drug delivery using contact lenses may be able to substitute for eye drop therapy. However, issues with hydrophobic drugs (like bimatoprost that is used to treat glaucoma) such as low drug uptake using a simple soaking method into preformed contact lenses and alteration in the swelling and transmittance of lenses restricts the application for drug delivery. This research uses graphene oxide (GO) to control the release of bimatoprost from contact lenses along with improvements in the drug uptake, and lens swelling and transmittance. GO was loaded into silicone hydrogel contact lenses by adding the GO at the same time as lenses were polymerized. These lenses were soaked in bimatoprost. Alternatively contact lenses, either with or without GO, were produced by adding bimatoprost during lens polymerization. GO improved contact lens swelling due to its water binding capacity and lens transmittance due to the molecular dispersion of bimatoprost on the surface of the GO which prevented the local precipitation of the drug. The bimatoprost uptake was not improved in the presence of GO. However, its in vitro release profile was improved. Adding bimatoprost and GO at the same time as lenses were polymerized (DL-GO-BMT) significantly decreased the loss of drug during extraction and sterilization in comparison to contact lenses (DL-BMT) without GO. As the amount of GO was increased, the DL-GO-BMT lenses showed a significant decrease in the burst and cumulative release of bimatoprost. Ocular irritation and histopathology reports demonstrated the safety of GO contact lens. The in vivo pharmacokinetic studies in the rabbit tear fluid showed significant improvement in mean residence time (MRT) and area under the curve (AUC) with DL-GO-0.2 μg-BMT-100 contact lens in comparison to eye drop solution. The study demonstrated that the addition of GO to contact lenses can control the release of bimatoprost as well as improved the lens swelling and transmittance. However, further optimization is needed to modulate the release of drug within the therapeutic level to manage glaucoma.

Pharmaceutical-loaded contact lenses as an ocular drug delivery system: A review of critical lens characterization methodologies with reference to ISO standards

Therapeutic contact lenses for ocular drug delivery have received considerable interest as they can potentially enhance ocular bioavailability, increase patient compliance, and reduce side effects. Along with the successful in vitro and in vivo studies on sustained drug delivery through contact lenses, lens critical properties such as water content, optical transparency and modulus have also been investigated. Aside from issues such as drug stability or burst release, the potential for the commercialization of pharmaceutical-loaded lenses can be limited by the alteration of lens physical and chemical properties upon the incorporation of therapeutic or non-therapeutic components. This review outlines advances in the use of pharmaceutical-loaded contact lenses and their relevant characterization methodologies as a potential ocular drug delivery system from 2010 to 2020, while summarizing current gaps and challenges in this field. A key reference point for this review is the relevant ISO standards on contact lenses, relating to the associated characterization methodologies. The content of this review is categorized based on the chemical, physical and mechanical properties of the loaded lens with the shortcomings of such analytical technologies examined.

Effect of Carbon Chain Length, Ionic Strength, and pH on the In Vitro Release Kinetics of Cationic Drugs from Fatty-Acid-Loaded Contact Lenses

This paper explores the use of fatty acids in silicone hydrogel contact lenses for extending the release duration of cationic drugs. Drug release kinetics was dependent on the carbon chain length of the fatty acid loaded in the lens, with 12-, 14- and 18-carbon chain length fatty acids increasing the uptake and the release duration of ketotifen fumarate (KTF) and tetracaine hydrochloride (THCL). Drug release kinetics from oleic acid-loaded lenses was evaluated in phosphate buffer saline (PBS) at different ionic strengths (I = 167, 500, 1665 mM); the release duration of KTF and THCL was decreased with increasing ionic strength of the release medium. Furthermore, the release of KTF and THCL in deionized water did not show a burst and was significantly slower compared to that in PBS. The release kinetics of KTF and THCL was significantly faster when the pH of the release medium was decreased from 7.4 towards 5.5 because of the decrease in the relative amounts of oleate anions in the lens mostly populated at the polymer–pore interfaces. The use of boundary charges at the polymer–pore interfaces of a contact lens to enhance drug partition and extend its release is further confirmed by loading cationic phytosphingosine in contact lenses to attract an anionic drug.

Sustained bimatoprost release using gold nanoparticles laden contact lenses

Contact lenses are ideally suited for sustained ocular drug delivery to bypass the issues associated with eye drop therapy. However, drugs such as bimatoprost loaded by the conventional soaking method show poor drug uptake, high burst release, and altered critical lens properties. In this study, the effect of gold nanoparticles (GNPs) on bimatoprost loading/uptake from the soaking solution and its release kinetics from the lens was investigated. In one method, GNP solutions of varying strength were loaded into the bimatoprost soaking solution (mM-SS batches), and in another method, the GNPs were included in the contact lens matrix during casting (mM-GN-L batches). The GNPs were spherical with average size of 21.1 nm and -20.1 mV zeta potential. The swelling, oxygen permeability, and optical transmittance of the lens were improved compared to those of the lens drug-loaded by the conventional soaking method (SM-L). The mM-GN-L batches showed significant improvement in drug uptake from the soaking solution compared to the SM-L and mM-SS batches. The in vitro studies showed relatively low burst and sustained bimatoprost release up to 72 h compared to 24 h with the SM-L batch. The ability to sustain drug release improved proportionally with an increase in the amount of GNPs in the lens. The presence of GNPs lowered protein adherence. The GNP-laden lenses were deemed safe in ocular irritation and histopathology reports (rabbit model). Further, they showed higher drug retention in the rabbit tear fluid compared to the SM-L lens. In conclusion, the presence of GNPs in contact lenses increased drug uptake from the soaking solution, and improved the in vitro and in vivo release kinetics without affecting the critical properties of the contact lenses for therapeutic application.

CLEAR - Contact lens technologies of the future

Contact lenses in the future will likely have functions other than correction of refractive error. Lenses designed to control the development of myopia are already commercially available. Contact lenses as drug delivery devices and powered through advancements in nanotechnology will open up further opportunities for unique uses of contact lenses. This review examines the use, or potential use, of contact lenses aside from their role to correct refractive error. Contact lenses can be used to detect systemic and ocular surface diseases, treat and manage various ocular conditions and as devices that can correct presbyopia, control the development of myopia or be used for augmented vision. There is also discussion of new developments in contact lens packaging and storage cases. The use of contact lenses as devices to detect systemic disease has mostly focussed on detecting changes to glucose levels in tears for monitoring diabetic control. Glucose can be detected using changes in colour, fluorescence or generation of electric signals by embedded sensors such as boronic acid, concanavalin A or glucose oxidase. Contact lenses that have gained regulatory approval can measure changes in intraocular pressure to monitor glaucoma by measuring small changes in corneal shape. Challenges include integrating sensors into contact lenses and detecting the signals generated. Various techniques are used to optimise uptake and release of the drugs to the ocular surface to treat diseases such as dry eye, glaucoma, infection and allergy. Contact lenses that either mechanically or electronically change their shape are being investigated for the management of presbyopia. Contact lenses that slow the development of myopia are based upon incorporating concentric rings of plus power, peripheral optical zone(s) with add power or non-monotonic variations in power. Various forms of these lenses have shown a reduction in myopia in clinical trials and are available in various markets.

Therapeutic Ophthalmic Lenses: A Review

An increasing incidence of eye diseases has been registered in the last decades in developed countries due to the ageing of population, changes in lifestyle, environmental factors, and the presence of concomitant medical conditions. The increase of public awareness on ocular conditions leads to an early diagnosis and treatment, as well as an increased demand for more effective and minimally invasive solutions for the treatment of both the anterior and posterior segments of the eye. Despite being the most common route of ophthalmic drug administration, eye drops are associated with compliance issues, drug wastage by lacrimation, and low bioavailability due to the ocular barriers. In order to overcome these problems, the design of drug-eluting ophthalmic lenses constitutes a non-invasive and patient-friendly approach for the sustained drug delivery to the eye. Several examples of therapeutic contact lenses and intraocular lenses have been developed, by means of different strategies of drug loading, leading to promising results. This review aims to report the recent advances in the development of therapeutic ophthalmic lenses for the treatment and/or prophylaxis of eye pathologies (i.e., glaucoma, cataract, corneal diseases, or posterior segment diseases) and it gives an overview of the future perspectives and challenges in the field.

Extended Delivery of Pirfenidone with Novel, Soft Contact Lenses In Vitro and In Vivo

Purpose: The aim of this study was to fabricate pirfenidone (PFD)-loaded soft contact lenses (SCLs), explore their characteristics, and evaluate their efficiency on extended delivery of PFD in vitro and in vivo. Methods: PFD-loaded SCLs were fabricated by embedding an insert of PFD and polyvinyl alcohol (PVA) into 2 layers of silicone elastomer. The optical transparency, water content, and protein deposition were measured. Transformed human corneal epithelial cells were used to test the cytotoxicity of SCLs. The release rate of PFD by SCLs in vitro was evaluated by an ultraviolet-visible spectrophotometer. Toxicity of SCLs was assessed by inspection of ocular surface irritation in rabbits before and after contact lens wear. The concentrations of PFD in tears and aqueous humor of rabbits' eyes as a function of time were determined by high-performance liquid chromatography for SCLs and 30 μL of 0.5% PFD eye drops. Results: SCLs possessed good light transmittance. Blank SCLs had poor water content (0.548% ± 0.330), and an improved water content was found in PVA film-loaded SCLs (11.022% ± 1.508, P = 0.010). No lysozyme and human serum albumin were found in SCLs. There was no significant toxicity of SCLs in vitro and in vivo. SCLs prolonged the residence time of PFD in tears and aqueous humor of rabbit eyes by 5 times compared with the eye drop instillation while around 1/10 of the eye drop dosage was loaded in SCLs. Conclusions: PFD-loaded SCLs can significantly prolong the residence time of PFD and may be a promising ocular drug delivery system.

Profile of tear lipid mediator as a biomarker of inflammation for meibomian gland dysfunction and ocular surface diseases: Standard operating procedures

Human tear is a biological fluid rich in lipids that is increasingly collected in clinical and biological research. The repertoire of small lipids or lipid mediators (often termed eicosanoids or oxylipins) found in human tear provides insight into metabolism of fatty acids and physiology of the ocular surface and Meibomian glands. Disturbances in the tear lipid mediators profile also occur during inflammation of the ocular surface that is not directly linked to lipid metabolism. The changes in the levels of pro-inflammatory and pro-resolution lipid mediators in the tear help assess the severity and stage of inflammation in ocular surface tissues. Mass spectrometry, used in the evaluation of tear lipid mediators, is an emerging tool in clinical diagnostics and personalized medicine. Here we describe the reproducibility, accuracy, and precision of quantifying lipid mediators in human tears, with a suggested method for tear collection and sample handling. The ranges of lipid mediators concentrations in tear fluid of healthy and diseased individuals with Meibomian gland dysfunction are reported, as well as the impact of age and disease on individual lipid mediators. We would like to recommend a set of guidelines, which can be further discussed in workshops. This will facilitate harmonization of future tear lipid mediators data across different instrument platforms in various laboratories. We hope that other fields requiring lipid mediators assays will also benefit from such an effort.

Evaluation of commercial soft contact lenses for ocular drug delivery: A review

Soft contact lenses have generated growing interest in ocular drug delivery due to their potential to enhance drug bioavailability in ocular tissues. Commercially available soft contact lenses offer several advantages for ocular drug delivery as they are manufactured on a large scale, which guarantees the availability of a consistent and reproducible product, and their favorable safety profile is well-established through broad clinical use. Here we review the rationale for using commercially available soft contact lenses for ocular drug delivery; summarize the evolution of the materials used in contact lens fabrication; and explore various methods used to improve the drug release characteristics and its tissue penetration. While significant progress has been made, several issues still require further attention for the commercial launch of a viable drug-eluting contact lens product, including control of initial burst release, shelf-life stability, and drug loss during processing or storage.

Rebaudioside A/TPGS mixed nanomicelles as promising nanocarriers for nimodipine ocular delivery

Nimodipine (NMD), a calcium channel blocker, has demonstrated benefits in treating glaucoma. However, its ocular therapeutic application remains limited due to its poor aqueous solubility, which restrains the development of an ophthalmic formulation. Thus, the present study aimed to formulate an NMD micelle ophthalmic solution to enhance the potential of NMD in an ocular topical formulation to treat glaucoma. The NMD micelle ophthalmic solution was formulated with nanocarriers composed of rebaudioside A and D-α-tocopheryl polyethylene glycol 1000 succinate. Spherical mixed micelles were optimized and obtained at a small micelle size 13.429 ± 0.181 nm with a narrow size distribution (polydispersity index 0.166 ± 0.023) and high encapsulation efficiency rate (99.59 ± 0.09%). Compared with free NMD, NMD in micelles had much greater in vitro membrane permeability and antioxidant activity. The NMD micelle ophthalmic solution was well tolerated in rabbit eyes. It profoundly improved the in vivo intraocular permeation of NMD, and in vivo intraocular pressure reduction and improved miosis were also observed. Accordingly, this NMD micelle ophthalmic solution might be a promising ocular formulation to treat glaucoma. Graphical abstract.

Contact Lenses as Drug Delivery System for Glaucoma: A Review

Glaucoma is an optical neuropathy associated to a progressive degeneration of retinal ganglion cells with visual field loss and is the main cause of irreversible blindness in the world. The treatment has the aim to reduce intraocular pressure. The first therapy option is to instill drugs on the ocular surface. The main limitation of this is the reduced time of the drug staying on the cornea. This means that high doses are required to ensure its therapeutic effect. A drug-loaded contact lens can diffuse into the post lens tear film in a constant and prolonged flow, resulting in an increased retention of the drug on the surface of the cornea for up to 30 min and thus providing a higher drug bioavailability, increasing the therapeutic efficacy, reducing the amount of administered drug, and thereby provoking fewer adverse events. Several different systems of drug delivery have been studied in recent decades; ranging from more simple methods of impregnating the lenses, such as soaking, to more complex ones, such as molecular imprinting have been proposed. Moreover, different drugs, from those already commercially available to new substances such as melatonin have been studied to improve the glaucoma treatment efficacy. This review describes the role of contact lenses as an innovative drug delivery system to treat glaucoma.

Extended release of dexamethasone from oleogel based rods

HYPOTHESIS

Topical and systemic methods are not able to deliver ophthalmic drugs for treatment of retinal diseases. Consequently, invasive monthly intravitreal injections through the eyeball are required to deliver retinal drugs. A reduction in the frequency of the injection through extended release of the drugs could have significant clinical benefits.

EXPERIMENTS

Oleogels containing ethyl cellulose as the gelator at 10% (wt%) in soybean oil were loaded with dexamethasone above the solubility limit and expunged from a syringe to create cylindrical rods for extended drug delivery. The devices were imaged to explore particle distribution and drug release was measured under sink conditions in buffer. A model was developed and fitted to data to determine effective drug diffusivity.

FINDINGS

Dexamethasone is released slowly due to the presence of the drug particles that serve as drug depots. The release increases from 600 to 3000 h as the drug loading is increased from 3% to 28%. The release profiles can be modeled by considering drug dissolution and diffusion, as well as the tortuosity of the matrix due to the presence of the voids formed after the drug particles have dissolved. The proposed approach is promising as the release profiles of the drug are comparable to commercial devices.

Formation of Drug-Participating Catanionic Aggregates for Extended Delivery of Non-Steroidal Anti-Inflammatory Drugs from Contact Lenses

This paper focuses on extending drug release duration from contact lenses by incorporating catanionic aggregates. The aggregates consist of a long-chain cationic surfactant, i.e., cetalkonium chloride (CKC), and an oppositely charged anti-inflammatory amphiphilic drug. We studied three non-steroidal anti-inflammatory (NSAID) drugs with different octanol–water partition coefficients; diclofenac sodium (DFNa), flurbiprofen sodium (FBNa), and naproxen sodium (NPNa). Confirmation of catanionic aggregate formation in solution was determined by steady and dynamic shear rheology measurements. We observed the increased viscosity, shear thinning, and viscoelastic behavior characteristic of wormlike micelles; the rheological data are reasonably well described using a Maxwellian fluid model with a single relaxation time. In vitro release experiments demonstrated that the extension in the drug release time is dependent on the ability of a drug to form viscoelastic catanionic aggregates. Such aggregates retard the diffusive transport of drug molecules from the contact lenses. Our study revealed that the release kinetics depends on the CKC concentration and the alkyl chain length of the cationic surfactant. We demonstrated that more hydrophobic drugs such as diclofenac sodium show a more extended release than less hydrophobic drugs such as naproxen sodium.

Effect of a Cationic Surfactant on Microemulsion Globules and Drug Release from Hydrogel Contact Lenses

The present study evaluates the in vitro release of diclofenac sodium (DFNa) from contact lenses based on poly-2-hydroxyethyl methacrylate (pHEMA) hydrogels containing an embedded microemulsion to extend release duration. The oil (ethyl butyrate)-in-water microemulsion systems are prepared with two non-ionic surfactants, Brij 97 or Tween 80, together with a long-alkyl chain cationic surfactant, cetalkonium chloride (CKC). Without CKC, Brij 97 or Tween 80-based microemulsions showed average droplet sizes of 12 nm and 18 nm, respectively. The addition of CKC decreased the average droplet sizes to 2–5 nm for both non-ionic surfactants. Such significant reduction in the average droplet size corresponds to an increase in the DFNa release duration as revealed by the in vitro experiments. Contact lens characterization showed that important properties such as optical transparency and water content of Brij 97-based contact lenses with cationic microemulsions was excellent. However, the optical transparency of the corresponding Tween 80 based contact lenses was unsatisfactory. The results indicate that cationic microemulsion-laden contact lenses can benefit from combinatory effects of microemulsions and cationic surfactant at low CKC weight percentage, e.g., with the release of 70% of the drug in 45, 10, and 7 h for B97-CKC-0.45%, CKC-0.45%, and control lenses, respectively. However, the microemulsion effect on extending DFNa release became negligible at the highest CKC weight percentage (1.8%).