Magainin-H2 effects on the permeabilization and mechanical properties of giant unilamellar vesicles

Nanoscale Perturbations of Lipid Bilayers Induced by Magainin 2: Insights from AFM Imaging and Force Spectroscopy

This study explores the impact of the antimicrobial peptide magainin 2 (Mag2) on lipid bilayers with varying compositions. We employed high-resolution atomic force microscopy (AFM) to reveal a dynamic spectrum of structural changes induced by Mag2. Our AFM imaging unveiled distinct structural alterations in zwitterionic POPC bilayers upon Mag2 exposure, notably the formation of nanoscale depressions within the bilayer surface, which we term as "surface pores" to differentiate them from transmembrane pores. These surface pores are characterized by a limited depth that does not appear to fully traverse the bilayer and reach the opposing leaflet. Additionally, our AFM-based force spectroscopy investigation on POPC bilayers revealed a reduction in bilayer puncture force (FP) and Young's modulus (E) upon Mag2 interaction, indicating a weakening of bilayer stability and increased flexibility, which may facilitate peptide insertion. The inclusion of anionic POPG into POPC bilayers elucidated its modulatory effects on Mag2 activity, highlighting the role of lipid composition in peptide-bilayer interactions. In contrast to surface pores, Mag2 treatment of E. coli total lipid extract bilayers resulted in increased surface roughness, which we describe as a fluctuation-like morphology. We speculate that the weaker cohesive interactions between heterogeneous lipids in E. coli bilayers may render them more susceptible to Mag2-induced perturbations. This could lead to widespread disruptions manifested as surface fluctuations throughout the bilayer, rather than the formation of well-defined pores. Together, our findings of nanoscale bilayer perturbations provide useful insights into the molecular mechanisms governing Mag2-membrane interactions.

Peptide Flexibility and the Hydrophobic Moment are Determinants to Evaluate the Clinical Potential of Magainins

Using a flexibility prediction algorithm and in silico structural modeling, we have calculated the intrinsic flexibility of several magainin derivatives. In the case of magainin-2 (Mag-2) and magainin H2 (MAG-H2) we have found that MAG-2 is more flexible than its hydrophobic analog, Mag-H2. This affects the degree of bending of both peptides, with a kink around two central residues (R10, R11), whereas, in Mag-H2, W10 stiffens the peptide. Moreover, this increases the hydrophobic moment of Mag-H2, which could explain its propensity to form pores in POPC model membranes, which exhibit near-to-zero spontaneous curvatures. Likewise, the protective effect described in DOPC membranes for this peptide regarding its facilitation in pore formation would be related to the propensity of this lipid to form membranes with negative spontaneous curvature. The flexibility of another magainin analog (MSI-78) is even greater than that of Mag-2. This facilitates the peptide to present a kind of hinge around the central F12 as well as a C-terminal end prone to be disordered. Such characteristics are key to understanding the broad-spectrum antimicrobial actions exhibited by this peptide. These data reinforce the hypothesis on the determinant role of spontaneous membrane curvature, intrinsic peptide flexibility, and specific hydrophobic moment in assessing the bioactivity of membrane-active antimicrobial peptides.

Structural insights into the interaction of antifungal peptides and ergosterol containing fungal membrane

The treatment of invasive drug-resistant and potentially life-threatening fungal infections is limited to few therapeutic options that are usually associated with severe side effects. The development of new effective antimycotics with a more tolerable side effect profile is therefore of utmost clinical importance. Here, we used a combination of complementary in vitro assays and structural analytical methods to analyze the interaction of the de novo antimicrobial peptide VG16KRKP with the sterol moieties of biological cell membranes. We demonstrate that VG16KRKP disturbs the structural integrity of fungal membranes both invitro and in model membrane system containing ergosterol along with phosphatidylethanolamine lipid and exhibits broad-spectrum antifungal activity. As revealed by systematic structure-function analysis of mutated VG16KRKP analogs, a specific pattern of basic and hydrophobic amino acid side chains in the primary peptide sequence determines the selectivity of VG16KRKP for fungal specific membranes.

The potential of AFM in studying the role of the nanoscale amphipathic nature of (lipo)-peptides interacting with lipid bilayers

Antimicrobial peptides (AMPs) and lipopeptides (LPs) represent very promising molecules to fight resistant bacterial infections due to their broad-spectrum of activity, their first target, i.e. the bacterial membrane, and the rapid bactericidal action. For both types of molecules, the action mechanism starts from the membrane of the pathogen agents, producing a disorganization of their phase structure or the formation of pores of different size altering their permeability. This mechanism of action is based on physical interactions more than on a lock-and-key recognition event and it is difficult for the pathogens to rapidly develop an effective resistance. Very small differences in the sequence of both AMPs and LPs might lead to very different effects on the target membrane. Therefore, a correct understanding of their mechanism of action is required with the aim of developing new synthetic peptides, analogues of the natural ones, with specific and more powerful bactericidal activity. Atomic force microscopy (AFM), with its high resolution and the associated force spectroscopy resource, provides a valuable technique to investigate the reorganization of lipid bilayers exposed to antimicrobial or lipopeptides. Here, we present AFM results obtained by ours and other groups on the action of AMPs and LPs on supported lipid bilayers (SLBs) of different composition. We also consider data obtained by fluorescence microscopy to compare the AFM data with another technique which can be used on different lipid bilayer model systems such as SLBs and giant unilamellar vesicles. The outcomes here presented highlight the powerful of AFM-based techniques in detecting nanoscale peptide-membrane interactions and strengthen their use as an exceptional complementary tool toin vivoinvestigations. Indeed, the combination of these approaches can help decipher the mechanisms of action of different antimicrobials and lipopeptides at both the micro and nanoscale levels, and to design new and more efficient antimicrobial compounds.

Amphiphilic Gold Nanoparticles: A Biomimetic Tool to Gain Mechanistic Insights into Peptide-Lipid Interactions

Functional peptides are now widely used in a myriad of biomedical and clinical contexts, from cancer therapy and tumor targeting to the treatment of bacterial and viral infections. Underlying this diverse range of applications are the non-specific interactions that can occur between peptides and cell membranes, which, in many contexts, result in spontaneous internalization of the peptide within cells by avoiding energy-driven endocytosis. For this to occur, the amphipathicity and surface structural flexibility of the peptides play a crucial role and can be regulated by the presence of specific molecular residues that give rise to precise molecular events. Nevertheless, most of the mechanistic details regulating the encounter between peptides and the membranes of bacterial or animal cells are still poorly understood, thus greatly limiting the biomimetic potential of these therapeutic molecules. In this arena, finely engineered nanomaterials-such as small amphiphilic gold nanoparticles (AuNPs) protected by a mixed thiol monolayer-can provide a powerful tool for mimicking and investigating the physicochemical processes underlying peptide-lipid interactions. Within this perspective, we present here a critical review of membrane effects induced by both amphiphilic AuNPs and well-known amphiphilic peptide families, such as cell-penetrating peptides and antimicrobial peptides. Our discussion is focused particularly on the effects provoked on widely studied model cell membranes, such as supported lipid bilayers and lipid vesicles. Remarkable similarities in the peptide or nanoparticle membrane behavior are critically analyzed. Overall, our work provides an overview of the use of amphiphilic AuNPs as a highly promising tailor-made model to decipher the molecular events behind non-specific peptide-lipid interactions and highlights the main affinities observed both theoretically and experimentally. The knowledge resulting from this biomimetic approach could pave the way for the design of synthetic peptides with tailored functionalities for next-generation biomedical applications, such as highly efficient intracellular delivery systems.

The Central PXXP Motif Is Crucial for PMAP-23 Translocation across the Lipid Bilayer

PMAP-23, a cathelicidin-derived host defense peptide, does not cause severe membrane permeabilization, but exerts strong and broad-spectrum bactericidal activity. We have previously shown that it forms an amphipathic α-helical structure with a central hinge induced by the PXXP motif, which is implicated in the interaction of PMAP-23 with negatively charged bacterial membranes. Here, we studied the potential roles of the PXXP motif in PMAP-23 translocation across the lipid bilayer by replacing Pro residues with either α-helix former Ala (PMAP-PA) or α-helix breaker Gly (PMAP-PG). Although both PMAP-PA and PMAP-PG led to effective membrane depolarization and permeabilization, they showed less antimicrobial activity than wild-type PMAP-23. Interestingly, we observed that PMAP-23 crossed lipid bilayers much more efficiently than its Pro-substituted derivatives. The fact that the Gly-induced hinge was unable to replace the PXXP motif in PMAP-23 translocation suggests that the PXXP motif has unique structural properties other than the central hinge. Surface plasmon resonance sensorgrams showed that the running buffer almost entirely dissociated PMAP-23 from the membrane surface, while its Pro-substituted derivatives remained significantly bound to the membrane. In addition, kinetic analysis of the sensorgrams revealed that the central PXXP motif allows PMAP-23 to rapidly translocate at the interface between the hydrophilic and hydrophobic phases. Taken together, we propose that the structural and kinetic understanding of the PXXP motif in peptide translocation could greatly aid the development of novel antimicrobial peptides with intracellular targets by promoting peptide entry into bacterial cells.

Preventing Biofilm Formation and Development on Ear, Nose and Throat Medical Devices

Otorhinolaryngology is a vast domain that requires the aid of many resources for optimal performance. The medical devices utilized in this branch share common problems, such as the formation of biofilms. These structured communities of microbes encased in a 3D matrix can develop antimicrobial resistance (AMR), thus making it a problem with challenging solutions. Therefore, it is of concern the introduction in the medical practice involving biomaterials for ear, nose and throat (ENT) devices, such as implants for the trachea (stents), ear (cochlear implants), and voice recovery (voice prosthetics). The surface of these materials must be biocompatible and limit the development of biofilm while still promoting regeneration. In this respect, several surface modification techniques and functionalization procedures can be utilized to facilitate the success of the implants and ensure a long time of use. On this note, this review provides information on the intricate underlying mechanisms of biofilm formation, the large specter of implants and prosthetics that are susceptible to microbial colonization and subsequently related infections. Specifically, the discussion is particularized on biofilm development on ENT devices, ways to reduce it, and recent approaches that have emerged in this field.

Influence of lipid bilayer composition on the activity of antimicrobial quaternary ammonium ionenes, the interplay of intrinsic lipid curvature and polymer hydrophobicity, the role of cardiolipin

Incorporation of hydrophobic component into amphiphilic polycations structure is frequently accompanied by an increase of antimicrobial activity. There is, however, a group of relatively hydrophilic polycations containing quaternary ammonium moieties along mainchain, ionenes, which also display strong antimicrobial and limited hemolytic properties. In this work, an influence of a hydrophobic side group length on antimicrobial mechanism of action is investigated in a series of novel amphiphilic ionenes. High antimicrobial activity was found by determination of minimum inhibitory concentration (MIC) and minimum bactericidal, and fungicidal concentration (MBC and MFC) in both growth media and a buffer. Biocompatibility was estimated by hemolytic and mammalian cells viability assays. Mechanistic studies were performed using large unilamellar vesicles (LUVs) with different lipid composition, as simplified models of cell membranes. The investigated ionenes are potent and selective antimicrobial molecules displaying a decrease of antimicrobial activity correlated with increase of hydrophobicity. Studies using LUVs revealed that the cardiolipin is an essential component responsible for the lipid bilayer permeabilization by investigated ionens. In contrast to relatively hydrophilic ionenes, more hydrophobic polymers showed an ability to stabilize membranes composed of lipids with negative spontaneous curvature in a certain range of polymer to lipid ratio. The results substantially contribute to the understanding of antimicrobial activity of the investigated class of polymers.

A Real-Time Thermal Sensor System for Quantifying the Inhibitory Effect of Antimicrobial Peptides on Bacterial Adhesion and Biofilm Formation

The increasing rate of antimicrobial resistance (AMR) in pathogenic bacteria is a global threat to human and veterinary medicine. Beyond antibiotics, antimicrobial peptides (AMPs) might be an alternative to inhibit the growth of bacteria, including AMR pathogens, on different surfaces. Biofilm formation, which starts out as bacterial adhesion, poses additional challenges for antibiotics targeting bacterial cells. The objective of this study was to establish a real-time method for the monitoring of the inhibition of (a) bacterial adhesion to a defined substrate and (b) biofilm formation by AMPs using an innovative thermal sensor. We provide evidence that the thermal sensor enables continuous monitoring of the effect of two potent AMPs, protamine and OH-CATH-30, on surface colonization of bovine mastitis-associated Escherichia (E.) coli and Staphylococcus (S.) aureus. The bacteria were grown under static conditions on the surface of the sensor membrane, on which temperature oscillations generated by a heater structure were detected by an amorphous germanium thermistor. Bacterial adhesion, which was confirmed by white light interferometry, caused a detectable amplitude change and phase shift. To our knowledge, the thermal measurement system has never been used to assess the effect of AMPs on bacterial adhesion in real time before. The system could be used to screen and evaluate bacterial adhesion inhibition of both known and novel AMPs.

Amphipathic Peptide Antibiotics with Potent Activity against Multidrug-Resistant Pathogens

The emergence and prevalence of multidrug-resistant (MDR) bacteria have posed a serious threat to public health. Of particular concern are methicillin-resistant Staphylococcus aureus (MRSA) and blaNDM, mcr-1 and tet(X)-positive Gram-negative pathogens. The fact that few new antibiotics have been approved in recent years exacerbates this global crisis, thus, new alternatives are urgently needed. Antimicrobial peptides (AMPs) originated from host defense peptides with a wide range of sources and multiple functions, are less prone to achieve resistance. All these characteristics laid the foundation for AMPs to become potential antibiotic candidates. In this study, we revealed that peptide WW307 displayed potent antibacterial and bactericidal activity against MDR bacteria, including MRSA and Gram-negative bacteria carrying blaNDM-5, mcr-1 or tet(X4). In addition, WW307 exhibited great biofilm inhibition and eradication activity. Safety and stability experiments showed that WW307 had a strong resistance against various physiological conditions and displayed relatively low toxicity. Mechanistic experiments showed that WW307 resulted in membrane damage by selectively targeting bacterial membrane-specific components, including lipopolysaccharide (LPS), phosphatidylglycerol (PG), and cardiolipin (CL). Moreover, WW307 dissipated membrane potential and triggered the production of reactive oxygen species (ROS). Collectively, these results demonstrated that WW307 represents a promising candidate for combating MDR pathogens.

Beneficial Impacts of Incorporating the Non-Natural Amino Acid Azulenyl-Alanine into the Trp-Rich Antimicrobial Peptide buCATHL4B

Antimicrobial peptides (AMPs) present a promising scaffold for the development of potent antimicrobial agents. Substitution of tryptophan by non-natural amino acid Azulenyl-Alanine (AzAla) would allow studying the mechanism of action of AMPs by using unique properties of this amino acid, such as ability to be excited separately from tryptophan in a multi-Trp AMPs and environmental insensitivity. In this work, we investigate the effect of Trp→AzAla substitution in antimicrobial peptide buCATHL4B (contains three Trp side chains). We found that antimicrobial and bactericidal activity of the original peptide was preserved, while cytocompatibility with human cells and proteolytic stability was improved. We envision that AzAla will find applications as a tool for studies of the mechanism of action of AMPs. In addition, incorporation of this non-natural amino acid into AMP sequences could enhance their application properties.

A Review of Single-Cell Adhesion Force Kinetics and Applications

Cells exert, sense, and respond to the different physical forces through diverse mechanisms and translating them into biochemical signals. The adhesion of cells is crucial in various developmental functions, such as to maintain tissue morphogenesis and homeostasis and activate critical signaling pathways regulating survival, migration, gene expression, and differentiation. More importantly, any mutations of adhesion receptors can lead to developmental disorders and diseases. Thus, it is essential to understand the regulation of cell adhesion during development and its contribution to various conditions with the help of quantitative methods. The techniques involved in offering different functionalities such as surface imaging to detect forces present at the cell-matrix and deliver quantitative parameters will help characterize the changes for various diseases. Here, we have briefly reviewed single-cell mechanical properties for mechanotransduction studies using standard and recently developed techniques. This is used to functionalize from the measurement of cellular deformability to the quantification of the interaction forces generated by a cell and exerted on its surroundings at single-cell with attachment and detachment events. The adhesive force measurement for single-cell microorganisms and single-molecules is emphasized as well. This focused review should be useful in laying out experiments which would bring the method to a broader range of research in the future.

Spectroscopic Analysis of the Binding of Paraquat and Diquat Herbicides to Biosubstrates

The study of the interaction of persistent organic pollutants with biosubstrates helps to unravel the pathways for toxicity, however, few mechanistic data are present in the literature for these systems. We analyzed the binding of paraquat (PQ) and diquat (DQ) herbicides to natural calf thymus DNA and a DNA G-quadruplex by spectrophotometric titrations, ethidium bromide exchange tests, viscometry, and melting experiments. The interaction with bovine serum albumin (BSA) protein was studied spectrofluorimetrically at different temperatures. The retention of the targets on positive, negative, and neutral micellar aggregates and liposomes was analyzed by ultrafiltration experiments. Despite some favorable features, PQ and DQ only externally bind natural DNA and do not interact with DNA oligonucleotides. Both herbicides bind bovine serum albumin (BSA). PQ binds BSA mainly according to an electrostatics-driven process. However, ultrafiltration data also show that some hydrophobic contribution participates in the features of these systems. The practical problems related to unfavorable spectroscopic signals and inner filter effects are also discussed. Overall, both herbicides show a low affinity for nucleic acids and weak penetration into liposomes; in addition, the equilibrium constants values found for BSA system suggest optimal conditions for transport in the body.

Daptomycin Strongly Affects the Phase Behavior of Model Lipid Bilayers

Daptomycin (DAP) is a calcium-dependent cyclic lipopeptide with great affinity for negatively charged phospholipids bearing the phosphatidylglycerol (PG) headgroup and has been used since 2003 as a last resort antibiotic in the treatment of severe infections caused by Gram-positive bacteria. The first step of its mechanism of action involves the interaction with the bacterial membrane, which not only represents a physical barrier but also accommodates transmembrane proteins, such as receptors, transporters, and enzymes, whose activity is crucial for the survival of bacteria. This results in a less efficient development of resistance strategies by pathogens compared to common antibiotics that activate or inhibit biochemical pathways connected to specific target proteins. Although already on the market, the molecular mechanism of action of DAP is still a controversial subject of investigation and it is most likely the result of a combination of distinct effects. Understanding how DAP targets the membrane of pathogens could be of great help in finding its analogues that could better avoid the development of resistance. Here, exploiting fluorescence microscopy and atomic force microscopy (AFM), we demonstrated that DAP affects the thermodynamic behavior of lipid mixtures containing PG moieties. Regardless of whether the PG lipids are in the liquid or solid phase, DAP preferably interacts with this headgroup and is able to penetrate more deeply into the lipid bilayer in the regions where this headgroup is present. In particular, considering the results of an AFM/spectroscopy investigation, DAP appears to produce a stiffening effect of the domains where PG lipids are mainly in the fluid phase, whereas it causes fluidification of the domains where PG lipids are in the solid phase.

Antimicrobial peptides as therapeutic agents: opportunities and challenges

The rapid development of microbial resistance to conventional antibiotics has accelerated efforts to find anti-infectives with a novel mode-of-action, which are less prone to bacterial resistance. Intense nonclinical and clinical research is today ongoing to evaluate antimicrobial peptides (AMPs) as potential next-generation antibiotics. Currently, multiple AMPs are assessed in late-stage clinical trials, not only as novel anti-infective drugs, but also as innovative product candidates for immunomodulation, promotion of wound healing, and prevention of post-operative scars. The efforts to translate AMP-based research findings into pharmaceutical product candidates are expected to accelerate in coming years due to technological advancements in multiple areas, including an improved understanding of the mechanism-of-action of AMPs, smart formulation strategies, and advanced chemical synthesis protocols. At the same time, it is recognized that cytotoxicity, low metabolic stability due to sensitivity to proteolytic degradation, and limited oral bioavailability are some of the key weaknesses of AMPs. Furthermore, the pricing and reimbursement environment for new antimicrobial products remains as a major barrier to the commercialization of AMPs.

Model lipid systems and their use to evaluate the phase state of biomembranes, their mechanical properties and the effect of non-conventional antibiotics: the case of daptomycin

The lipid bilayer is the basis of the structure and function of the cell membrane. The study of the molecular phenomena that affect biological membranes has a great impact on the understanding of cellular physiology. To understand these phenomena, it has become increasingly necessary to develop simple synthetic models that allow the most basic details of such processes to be reproduced. In this short communication, we took advantage of the properties of two well-established lipid model systems, GUVs and SLBs, with compositions mimicking the cell membrane present in mammals and bacteria, to study the thermotropic phase behavior of lipids as well as the effect of daptomycin, a cyclic lipopeptide used as an antibiotic. The study of mechanical and thermodynamical properties of these model systems could contribute to establish a theoretical framework to develop more efficient strategies for biological control.

Predicting asymmetric phospholipid microstructures in solutions

Asymmetric phospholipid microstructures, such as asymmetric phospholipid membranes, have potential applications in biological and medicinal processes. Here, we used the dissipative particle dynamics simulation method to predict the asymmetric phospholipid microstructures in aqueous solutions. The asymmetric phospholipid membranes, tubes and vesicles are determined and characterized by the chain density distributions and order parameters. The phase diagrams are constructed to evaluate the effects of the chain length on the asymmetric structure formations at equilibrium states, while the average radius of gyration and shape factors are calculated to analyze the asymmetric structure formations in the non-equilibrium processes. Meanwhile, we predicted the mechanical properties of the asymmetric membranes by analyzing the spatial distributions of the interface tensions and osmotic pressures in solutions.

Membrane Remodeling by the Lytic Fragment of SticholysinII: Implications for the Toroidal Pore Model

Sticholysins are pore-forming toxins of biomedical interest and represent a prototype of proteins acting through the formation of protein-lipid or toroidal pores. Peptides spanning the N-terminus of sticholysins can mimic their permeabilizing activity and, together with the full-length toxins, have been used as a tool to understand the mechanism of pore formation in membranes. However, the lytic mechanism of these peptides and the lipid shape modulating their activity are not completely clear. In this article, we combine molecular dynamics simulations and experimental biophysical tools to dissect different aspects of the pore-forming mechanism of StII_1-30, a peptide derived from the N-terminus of sticholysin II (StII). With this combined approach, membrane curvature induction and flip-flop movement of the lipids were identified as two important membrane remodeling steps mediated by StII_1-30. Pore formation by this peptide was enhanced by the presence of the negatively curved lipid phosphatidylethanolamine in membranes. This lipid emerged not only as a facilitator of membrane interactions but also as a structural element of the StII_1-30 pore that is recruited to the ring upon its assembly. Collectively, these, to our knowledge, new findings support a toroidal model for the architecture of the pore formed by StII_1-30 and provide new molecular insight into the role of phosphatidylethanolamine as a membrane component that can easily integrate into the ring of toroidal pores, thus probably aiding in their stabilization. This study contributes to a better understanding of the molecular mechanism underlying the permeabilizing activity of StII_1-30 and peptides or proteins acting via a toroidal pore mechanism and offers an informative framework for the optimization of the biomedical application of this and similar molecules.