3D graphene aerogel composite of 1D-2D Nb2O5-g-C3N4 heterojunction with excellent adsorption and visible-light photocatalytic performance

A systematic review on Nb2O5-based photocatalysts: Crystallography, synthetic methods, design strategies, and photocatalytic mechanisms

With the increasing popularity of photocatalytic technology and the highly growing issues of energy scarcity and environmental pollution, there is an increasing interest in extremely efficient photocatalytic systems. The widespread immense attention and applicability of Nb2O5 photocatalysts can be attributed to their multiple benefits, including strong redox potentials, non-toxicity, earth abundance, corrosion resistance, and efficient thermal and chemical stability. However, the large-scale application of Nb2O5 is currently impeded by the barriers of rapid recombination loss of photo-activated electron/hole pairs and the inadequacy of visible light absorption. To overcome these constraints, plentiful design strategies have been directed at modulating the morphology, electronic band structure, and optical properties of Nb2O5. The current review offers an extensive analysis of Nb2O5-based photocatalysts, with a particular emphasis on crystallography, synthetic methods, design strategies, and photocatalytic mechanisms. Finally, an outline of future research directions and challenges in developing Nb2O5-based materials with excellent photocatalytic performance is presented.

Aerogel for Highly Efficient Photocatalytic Degradation

Photocatalysis is one of the effective ways to degrade pollutant antibiotics. Agar is used as the adsorption module to provide abundant pore structure. Carbon dots (CDs) are selected as light energy conversion components. Graphitic carbon nitride (g-C3N4) is used as the main material of the catalyst. Agar/CDs/g-C3N4-functionalized aerogel with a unique 3D pore structure is assembled. The Agar/CDs/g-C3N4 aerogel shows the highest photocurrent density, which is 3.7 times that of agar, 2.4 times that of 3-g-C3N4 and 1.6 times that of Agar/g-C3N4 aerogel. Compared with 3-g-C3N4 and Agar/g-C3N4 aerogel, which can completely remove AMX after 75 min, Agar/CDs/g-C3N4 aerogel can degrade amoxicillin (AMX) completely after 45 min of illumination. The reason is that Agar/CDs/g-C3N4 aerogel has a larger specific surface area, richer functional groups, a wider spectral range, higher photocurrent density and better carrier migration and separation efficiency. It is a good strategy with which to combine the effects of each component in the ternary system for the efficient photocatalysis of organic pollutants.

Graphene-based photocatalysts for degradation of organic pollution

Compared with the traditional wastewater treatment technology, semiconductor photocatalysis is a rapidly emerging environment-friendly and efficient Advanced Oxidation Process for degradation of refractory organic contaminants. Single-component semiconductor photocatalysts exhibit poor photocatalytic performance and cannot meet the requirements of wastewater treatment. The combination of semiconductor photocatalysts and Graphene can effectively improve the photocatalytic activity and stability of semiconductor photocatalysts. This review focuses on the synergistic effect of several types of semiconductors with Graphene for photocatalytic degradation of organic pollutants. After a brief introduction of the photodegradation mechanism of semiconductor materials and the basic description of Graphene, the synthesis, characterization and degradation performance of various Graphene-based semiconductor photocatalysts are emphatically introduced.

Laser flash photolysis study of Nb2O5/g-C3N4 heterostructures as efficient photocatalyst for molecular H2 evolution

Improvements of visible light activity, slow recombination rate, stability, and efficiency are major challenges facing photocatalyst technologies today. Utilizing heterostructures of g-C₃N₄ (bandgap ∼2.7eV) with Nb₂O₅ (bandgap ∼3.4eV) as an alternative materials for the first time, we tried to overcome such challenges in this work. Heterostructures of Nb₂O₅/g-C₃N₄ have been synthesized via hydrothermal technique. And then a time-resolved laser flash photolysis of those heterostructures has been analyzed, focusing on seeking how to improve photocatalytic efficiency for molecular hydrogen (H₂) evolution. The transient absorption spectra and the lifetime of charge carriers at different wavelengths have been observed for Nb₂O₅/g-C₃N₄, where g-C₃N₄ was used for a control. The role of hole scavenger (methanol) has also been investigated for the purpose of boosting charge trapping and H₂ evolution. The long lifetime of Nb₂O₅/g-C₃N₄ heterostructures (6.54165 μs) compared to g-C₃N₄ (3.1651897 μs) has successfully supported the increased H₂ evolution of 75 mmol/h.g. An enhancement in the rate of H₂ evolution (160 mmol/h.g) in the presence of methanol has been confirmed. This study not only deepens our understanding of the role of scavenger, but also enables a rigorous quantification of the recombination rate crucial for photocatalytic applications in relation with efficient H₂ production.

A Flexible and Weavable Lignocellulose-Based Photocatalyst Supported by Natural Three-Dimensional Porous Juncus effusus for Highly Efficient Degradation of Environmental Contaminants

Lignocellulosic biomass is a potential biotemplate for disposing the burden of the uncontrollable accumulation of environmental contaminants disrupting the hydrophytic ecosystems. Herein, an efficient solar-driven catalyst was prepared using a natural three-dimensional (3D) porous lignocellulose-based Juncus effusus (JE) fiber for wastewater treatment. Owing to the exquisite 3D microstructure and abundant hydroxyl groups, the two-dimensional lamellar graphitic carbon nitride/graphene oxide (g-C₃N₄/GO) nanocomposites were successfully synthesized and decorated on the carboxymethylated JE fiber via the electrostatic self-assembly method. The as-prepared g-C₃N₄/GO-JE (CNG-JE) photocatalyst exhibits excellent light absorption efficiency and a superior ability to accelerate photogenerated electron migration. The outstanding adsorption performance toward pollutants also contributes to the photodegradation property of CNG-JE, showing highly efficient degradation of C.I. Reactive Red 120 (99.8%), C.I. Acid Yellow 11 (99.8%), methylene blue (99.4%), Cr(VI) (98.8%), and tetracycline (87.2%). Most importantly, the lignocellulose-based CNG-JE fibers could be fabricated into a photocatalyst textile due to their flexible and weavable properties. In actual application, the CNG-JE textile can be reused for at least five cycles under the sun, demonstrating that the flexible CNG-JE textile is practical and recyclable. This study may provide a platform for constructing efficient, flexible, and weavable biomass-based porous materials for cost-effective and sustainable catalytic applications.

Two-dimensional material-based functional aerogels for treating hazards in the environment: synthesis, functional tailoring, applications, and sustainability analysis

Environmental pollution is a global problem that endangers human health and ecological balance. As a new type of functional material, two-dimensional material (2DM)-based aerogel is one of the most promising candidates for pollutant detection and environmental remediation. The porous, network-like, interconnected three-dimensional (3D) structure of 2DM-based aerogels can not only preserve the characteristics of the original 2DMs, but also bring many distinct physical and chemical properties to offer abundant active sites for adsorbing and combining pollutants, thereby facilitating highly efficient monitoring and treatment of hazardous pollutants. In this review, the synthesis methods of 2DM aerogels and their broad environmental applications, including various sensors, adsorbents, and photocatalysts for the detection and treatment of pollutants, are summarized and discussed. In addition, the sustainability of 2DM aerogels compared to other water purification materials, such as activated carbon, 2DMs, and other aerogels are analyzed by the Sustainability Footprint method. According to the characteristics of different 2DMs, special focuses and perspectives are given on the adsorption properties of graphene, MXene, and boron nitride aerogels, as well as the sensing and photocatalytic properties of transition metal dichalcogenide/oxide and carbon nitride aerogels. This comprehensive work introduces the synthesis, modification, and functional tailoring strategies of different 2DM aerogels, as well as their unique characteristics of adsorption, photocatalysis, and recovery, which will be useful for the readers in various fields of materials science, nanotechnology, environmental science, bioanalysis, and others.

Surface engineering of copper sulfide-titania-graphitic carbon nitride ternary nanohybrid as an efficient visible-light photocatalyst for pollutant photodegradation

Advanced photocatalyst is a key for photocatalytic water purification in the environmental pollutant remediation. In this study, graphitic carbon nitride (g-CN) modified by CuS and TiO₂ ternary nanohybrid (CuS-TiO₂-g-CN) with close interfacial contact among CuS, TiO₂ and g-CN was fabricated through a facile and green method. Compared to the binary g-CN-based counterparts, the CuS-TiO₂-g-CN possesses multiple photo-generated charge transfers owing to the synergistic action of CuS, TiO₂ and g-CN. And hence the separation efficiency of photo-generated electron-hole pairs can be improved for the CuS-TiO₂-g-CN. The optical and photoelectrochemical measurements prove that the CuS-TiO₂-g-CN has narrower band gap energy and higher transient photocurrent density than those of g-CN and TiO₂-g-CN. Therefore, the CuS-TiO₂-g-CN shows notably higher photocatalytic activity and stability towards the degradation of Rhodamine B (RhB) than g-CN and TiO₂-g-CN under visible-light irradiation. Moreover, a possible visible-light photocatalytic mechanism of CuS-TiO₂-g-CN for degrading RhB was also proposed on the basis of the experimental results and literature reports.

Progress on photocatalytic semiconductor hybrids for bacterial inactivation

Due to its use of green and renewable energy and negligible bacterial resistance, photocatalytic bacterial inactivation is to be considered a promising sterilization process. Herein, we explore the relevant mechanisms of the photoinduced process on the active sites of semiconductors with an emphasis on the active sites of semiconductors, the photoexcited electron transfer, ROS-induced toxicity and interactions between semiconductors and bacteria. Pristine semiconductors such as metal oxides (TiO₂ and ZnO) have been widely reported; however, they suffer some drawbacks such as narrow optical response and high photogenerated carrier recombination. Herein, some typical modification strategies will be discussed including noble metal doping, ion doping, hybrid heterojunctions and dye sensitization. Besides, the biosafety and biocompatibility issues of semiconductor materials are also considered for the evaluation of their potential for further biomedical applications. Furthermore, 2D materials have become promising candidates in recent years due to their wide optical response to NIR light, superior antibacterial activity and favorable biocompatibility. Besides, the current research limitations and challenges are illustrated to introduce the appealing directions and design considerations for the future development of photocatalytic semiconductors for antibacterial applications.

Exfoliation of 2D materials by saponin in water: Aerogel adsorption / photodegradation organic dye

The biggest challenge for the paint industry is to clean the contaminated waste dye solution before it released into the water or to reuse it to create new paint and to protect the water from environmental pollution. Here in this work, exfoliating layered transition metal dichalcogenide materials prepare to the exfoliated 2D materials thin sheets in water with the assistance of natural saponin. Then, the three-dimensional (3D) MoS₂-aerogel composite was synthesized by using greenway exfoliated two-dimensional (2D) MoS₂ thin sheets to form MoS₂-aerogel composite. The prepared 3D MoS₂-aerogel composite demonstrates excellent 94% methylene blue (MB) dye adsorption ability over 5 min. Moreover, the adsorbed MB of the MoS₂-aerogel shows ∼80% dye degradation activity in the presence of visible light. Therefore, these synthesized 3D MoS₂-aerogel composite could be an excellent candidate for photocatalytic applications in the future.

Nb2O5-Based Photocatalysts

Photocatalysis is one potential solution to the energy and environmental crisis and greatly relies on the development of the catalysts. Niobium pentoxide (Nb2O5), a typically nontoxic metal oxide, is eco-friendly and exhibits strong oxidation ability, and has attracted considerable attention from researchers. Furthermore, unique Lewis acid sites (LASs) and Brønsted acid sites (BASs) are observed on Nb2O5 prepared by different methods. Herein, the recent advances in the synthesis and application of Nb2O5-based photocatalysts, including the pure Nb2O5, doped Nb2O5, metal species supported on Nb2O5, and other composited Nb2O5 catalysts, are summarized. An overview is provided for the role of size and crystalline phase, unsaturated Nb sites and oxygen vacancies, LASs and BASs, dopants and surface metal species, and heterojunction structure on the Nb2O5-based catalysts in photocatalysis. Finally, the challenges are also presented, which are possibly overcome by integrating the synthetic methodology, developing novel photoelectric characterization techniques, and a profound understanding of the local structure of Nb2O5.

1D/2D Heterostructured Photocatalysts: From Design and Unique Properties to Their Environmental Applications

With the progress of dissimilar dimensional materials, 1D and 2D materials have been extensively investigated as heterogeneous photocatalysts, which realize the unique dimensionality-dependent advantages and mitigate the disadvantages during the environmental and sustainable energy applications. The progress in 1D/2D heterogeneous photocatalysts stems from the combination of different growth modes between 1D and 2D nanostructures and the judicious control to establish the oriented 1D/2D interface. To promote this field, it is necessary to gain insights into the interface engineering in the 1D/2D heterogeneous photocatalysts. This mini-review summarizes the designed synthesis and application of dimensional heterogeneous photocatalysts from 1D and 2D materials. Some typical research to overview the advantages of different types of interface engineered 1D/2D heterogeneous photocatalysts for various photocatalytic processes is highlighted in detail. At last, this review ends by drawing on more design strategies for such 1D/2D heterogeneous photocatalysts, which may inspire further developments of efficient dissimilar dimensional heterogeneous photocatalysts.

From 2D Graphene Nanosheets to 3D Graphene-based Macrostructures

The combination of exceptional functionalities offered by 3D graphene-based macrostructures (GBMs) has attracted tremendous interest. 2D graphene nanosheets have a high chemical stability, high surface area and customizable porosity, which was extensively researched for a variety of applications including CO₂ adsorption, water treatment, batteries, sensors, catalysis, etc. Recently, 3D GBMs have been successfully achieved through few approaches, including direct and non-direct self-assembly methods. In this review, the possible routes used to prepare both 2D graphene and interconnected 3D GBMs are described and analyzed regarding the involved chemistry of each 2D/3D graphene system. Improvement of the accessible surface of 3D GBMs where the interface exchanges are occurring is of great importance. A better control of the chemical mechanisms involved in the self-assembly mechanism itself at the nanometer scale is certainly the key for a future research breakthrough regarding 3D GBMs.