Engineering 3D hierarchical thorn-like PtPdNiCu alloyed nanotripods with enhanced performances for methanol and ethanol electrooxidation

Interface Engineering of PdPt Ultrafine Ethanol Electro-Oxidation Nanocatalysts by Bacterial Soluble Extracellular Polymeric Substances (s-EPS) to Break through Sabatier Principle

Unsatisfactory performance of ethanol oxidation reaction (EOR) catalysts hinders the application of direct ethanol fuel cells (DEFCs), while traditional alloy catalysts (like PdPt) is cursed by Sabatier principle due to countable active site types. However, bacterial soluble extracellular polymeric substances (s-EPS) owning abundent functional groups may help breacking through it by contrusting different active sites on PdPt and inducing them to play synergy effect, which is called interface engineering. Using s-EPS to engineer catalysts is more green and consumes lower energy compared to chemical reagents. Herein, PdPt alloy nanoparticles (≈2.1 nm) are successfully in situ synthesized by/on s-EPS of Bacillus megaterium, an ex-holotype. Tryptophan residuals are proved as the main reductant. In EOR, PdPt@s-EPS shows higher activity (3.89 mA cm-2) than Pd@s-EPS, Pt@s-EPS, Pt/C and most reported akin catalysts. Its stability and durability are excellent, too. DFT modelling further demonstrates that, interface engineering by s-EPS breaks through Sabatier principle, by the synergy of diverse sites owning different degrees of d-p orbital hybridization. This work not only makes DEFCs closer to practice, but provides a facile and green strategy to design more catalysts.

"Two-in-One" PtPdCu Trimetallic Multifunctional Nanoparticles-Mediated Dual-Signal-Integrated Aptasensor for Ultradetection of Enrofloxacin

Balancing the accuracy and simplicity of aptasensors is a challenge in their construction. This study addresses this issue by leveraging the remarkable loading capacity and peroxidase-like catalytic activity of PtPdCu trimetallic nanoparticles, which reduces the reliance on precious metals. A dual-signal readout aptasensor for enrofloxacin (ENR) detection is designed, incorporating DNA dynamic network cascade reactions to further amplify the output signal. Exploiting the strong loading capacity of PtPdCu nanoparticles, they are self-assembled with thionine (Thi) to form a signal label capable of generating signals in two independent modes. The label exhibits excellent enzyme-like catalytic activity and enhances electron transfer capabilities. Differential pulse voltammetry (DPV) and square-wave voltammetry (SWV) are employed to independently read signals from the oxidation-reduction reaction of Thi and the catalytic oxidation of hydroquinone (HQ) to benzoquinone (BQ) by H2O2. The introduced DNA dynamic network cascade reaction modularizes sample processing and electrode surface signal generation, avoiding electrode contamination and efficiently increasing the output of the catalyzed hairpin assembly (CHA) cycle. Under optimized conditions, the developed aptasensor demonstrates detection limits of 0.112 (DPV mode) and 0.0203 pg/mL (SWV mode). Additionally, the sensor successfully detected enrofloxacin in real samples, expanding avenues for designing dual-mode signal amplification strategies.

Synthesis of Solvent-Mediated Morphology-Controlled PdSn Alloy Nanocatalysts and their Application in Electrocatalysis of Ethylene Glycol and Ethanol

2D nanodendrites (NDs) and nanosheets (NSs) have been regarded as efficient nanocatalysts for enhancing the electrocatalytic performance due to their low coordinated sites and abundant electrocatalytic centers. Nevertheless, it remains challenging to construct advanced NDs and NSs in a single reaction system. Herein, by tuning the volume ratios of mixed solvents, the reduction and diffusion rate of Sn2+ on Pd NSs template was rationally controlled to prepare PdSn NDs and PdSn NSs. Ascribed to the open 2D nanostructure, high specific surface area, and robust synergistic effect, the as-prepared PdSn NDs and PdSn NSs exhibited distinguished electrocatalytic activities for ethylene glycol oxidation reaction (EGOR) and ethanol oxidation reaction (EOR), as well as commendable electrocatalytic durability, which were far superior to the Pd NSs and commercial Pd/C. In addition, the PdSn NDs exhibited enhanced reaction kinetics because the characteristic branch structure exposed a high density of active sites. This work may provide significant guidance for preparing excellent nanocatalysts with various morphological features by simply optimizing the content of the coexisting solvents.

Green Synthesis of PtPdNiFeCu High-Entropy Alloy Nanoparticles for Glucose Detection

High-entropy alloys have long been used as a new type of alloy material and have attracted widespread concern because of their excellent performance, including their stable microstructure and particular catalytic properties. To design a safer preparation method, we report a novel approach targeting green synthesis, using tea polyphenols to prepare PtPdNiFeCu high-entropy alloy nanoparticles for glucose detection. The fabricated sensors were characterized by transmission electron microscopy and electrochemical experiments. Physical characterization showed that the nanoparticle has better dispersibility, and the average particle size is 7.5 nm. The electrochemical results showed that Tp-PtPdNiFeCu HEA-NPs had a high sensitivity of 1.264 μA mM-1 cm-2, a low detection limit of 4.503 μM, and a wide detection range of 0 - 10 mM. In addition, the sensor has better stability and selectivity for glucose detection.

Facile Synthesis of Multifunctional Ni(OH)2 -Supported Core-Shell Ni@Pd Nanocomposites for the Electro-Oxidation of Small Organic Molecules

In the domain of proton exchange membrane fuel cells (PEMFCs), the development of efficient and durable catalysts for the electro-oxidation of small organic molecules, especially of alcohols (methanol, ethanol, ethylene glycol, et al.) has always been a hot topic. A large number of related electrocatalysts with splendid performance have been designed and synthesized till now, while the preparation processes of most of them are demanding on experimental operations and conditions. Herein, we put forward a facile and handy method for the preparation of multifunctional Ni(OH)2 -supported core-shell Ni@Pd nanocomposites (Ni(OH)2 /Ni@Pd NCs) with the assistance of galvanic replacement reaction (GRR) at room temperature and ambient pressure. As expected, the Ni(OH)2 substrate can prevent the aggregation of core-shell (CS) Ni@Pd nanoparticles (NPs) and inhibit the formation of COads and further prevent Pd from being poisoned. The synergistic effect between CS Ni@Pd NPs and Ni(OH)2 substrate and the electronic effect between Pd shell and Ni core contribute to the outstanding electrocatalytic performance for methanol, ethanol, and ethylene glycol oxidation in alkaline condition. This study provides a succinct method for the design and preparation of efficient Pd-based electrocatalysts for alcohol electro-oxidation.

Engineering composition-varied Au/PtTe hetero-junction-abundant nanotrough arrays as robust electrocatalysts for ethanol electrooxidation

Pt-based multi-metallic electrocatalysts containing hetero-junctions are found to have superior catalytic performance to composition-equivalent counterparts. However, in bulk solution, controllable preparation of Pt-based hetero-junction electrocatalyst is an extremely random work owing to the complexity of solution reactions. Herein, we develop an interface-confined transformation strategy, subtly achieving Au/PtTe hetero-junction-abundant nanostructures by employing interfacial Te nanowires as sacrificing templates. By controlling the reaction conditions, composition-varied Au/PtTe can be easily obtained, such as Au₇₅/Pt₂₀Te₅, Au₅₅/Pt₃₄Te₁₁, and Au₅/Pt₆₉Te₂₆. Moreover, each Au/PtTe hetero-junction nanostructure appears to be an array consisting of side-by-side Au/PtTe nanotrough units and can be directly used as a catalyst layer without further post-treatment. All Au/PtTe hetero-junction nanostructures show better catalytic activity towards ethanol electrooxidation than commercial Pt/C because of the combining contributions of Au/Pt hetero-junctions and the collective effects of multi-metallic elements, where Au₇₅/Pt₂₀Te₅ exhibits the best electrocatalytic performance among three Au/PtTe nanostructures owing to its optimal composition. This study may provide technically feasible guidance for further maximizing the catalytic activity of Pt-based hybrid catalysts.

Electro-Design of Bimetallic PdTe Electrocatalyst for Ethanol Oxidation: Combined Experimental Approach and Ab Initio Density Functional Theory (DFT)-Based Study

An alternative electrosynthesis of PdTe, using the electrochemical atomic layer deposition (E-ALD) method, is reported. The cyclic voltammetry technique was used to analyze Au substrate in copper (Cu²⁺), and a tellurous (Te⁴⁺) solution was used to identify UPDs and set the E-ALD cycle program. Results obtained using atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques reveal the nanometer-sized flat morphology of the systems, indicating the epitaxial characteristics of Pd and PdTe nanofilms. The effect of the Pd:Te ratio on the crystalline structure, electronic properties, and magnetic properties was investigated using a combination of density functional theory (DFT) and X-ray diffraction techniques. Te-containing electrocatalysts showed improved peak current response and negative onset potential toward ethanol oxidation (5 mA; -0.49 V) than Pd (2.0 mA; -0.3 V). Moreover, DFT ab initio calculation results obtained when the effect of Te content on oxygen adsorption was studied revealed that the d-band center shifted relative to the Fermi level: -1.83 eV, -1.98 eV, and -2.14 eV for Pd, Pd₃Te, and Pd₃Te₂, respectively. The results signify the weakening of the CO-like species and the improvement in the PdTe catalytic activity. Thus, the electronic and geometric effects are the descriptors of Pd₃Te₂ activity. The results suggest that Pd₂Te₂ is a potential candidate electrocatalyst that can be used for the fabrication of ethanol fuel cells.

Simple Synthesis of PdAg Porous Nanowires as Effective Catalysts for Polyol Oxidation Reaction

The development of efficient and stable Pd-based electrocatalysts is extremely important to facilitate the development of catalysts for polyol oxidation reactions. To synthesize Pd-based catalysts with excellent catalytic performance, a series of PdAg porous nanowires (PdAg PNWs) with different elemental ratios was constructed by facile synthesis using a seed-mediated method. The synthesized PdAg PNWs have a rough surface and a porous one-dimensional structure, which optimize the specific surface area and surface area of catalysts, thereby providing more active sites for catalysts. PdAg PNWs benefited from the geometric effect of porous nanowires and the synergy between Pd and Ag, showing excellent catalysis (8243.0 and 4137.0 mA mg_Pd^-1) for the ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). Among them, the optimal Pd₆₂Ag₃₈ PNWs show the highest catalytic activity (6.0 times and 3.9 times higher than Pd/C) and stability compared with Pd₅₇Ag₄₃ PNWs, Pd₅₁Ag₄₉ PNWs, and Pd/C for EGOR and GOR. At the same time, this porous one-dimensional structure also endows PdAg PNWs with faster electron transfer capabilities than Pd/C. This work will likely provide an effective strategy for constructing cost-effective catalysts.

Ultrathin and Porous 2D PtPdCu Nanoalloys as High-Performance Multifunctional Electrocatalysts for Various Alcohol Oxidation Reactions

We precisely synthesized two-dimensional (2D) PtPdCu nanostructures with the morphology varying from porous circular nanodisks (CNDs) and triangular nanoplates (TNPs) to triangular nanoboomerangs (TNBs) by tuning the molar ratios of metal precursors. The PtPdCu trimetallic nanoalloys exhibit superior electrocatalytic performances to alcohol oxidation reactions due to their unique structural features and the synergistic effect. Impressively, PtPdCu TNBs exhibit a high mass activity of 3.42 mg_Pt+Pd^-1 and 1.06 A·mg_Pt^-1 for ethanol and methanol oxidation compared to PtPd, PtCu, and pure Pt, which is 3.93 and 4.07 times that of commercial Pt/C catalysts, respectively. Moreover, 2D PtPdCu TNPs and PtPdCu CNDs also show a highly improved electrocatalytic activity. Furthermore, as all-in-one electrocatalysts, PtPdCu nanoalloys display excellent electrocatalytic activity and stability toward the oxidation of other alcohol molecules, such as isopropyl alcohol, glycerol, and ethylene glycol. The enhanced mechanism was well proposed to be the abundant active sites and upshifted d-band center based on density functional theory calculations.

Fucoidan-Mediated Anisotropic Calcium Carbonate Nanorods of pH-Responsive Drug Release for Antitumor Therapy

The shape of nanoparticles can determine their physical properties and then greatly impact the physiological reactions on cells or tissues during treatment. Traditionally spherical nanoparticles are more widely applied in biomedicine but are not necessarily the best. The superiority of anisotropic nanoparticles has been realized in recent years. The synthesis of the distinct-shaped metal/metal oxide nanoparticles is easily controlled. However, their biotoxicity is still up for debate. Hence, we designed CaCO3 nanorods for drug delivery prepared at mild condition by polysaccharide-regulated biomineralization in the presence of fucoidan with sulfate groups. The CaCO3 nanorods with a pH sensitivity–loaded antitumor drug mitoxantrone hydrochloride (MTO) showed excellent antitumor efficacy for the HeLa cells and MCF-7 cells in vitro. We believe that anisotropic nanoparticles will bring forth an emblematic shift in nanotechnology for application in biomedicine.

Core@shell PtAuAg@PtAg Hollow Nanodendrites as Effective Electrocatalysts for Methanol and Ethylene Glycol Oxidation

Pt-based catalysts with core@shell structures are widely used in alcohol oxidations due to their excellent catalytic performance. In this work, we synthesized a series of core@shell PtAuAg@PtAg hollow nanodendrites (HNDs) with different compositions by a simple seed-mediated method. The PtAuAg@PtAg HNDs with a hollow core and dendritic shell exhibit excellent catalytic performance for ethylene glycol oxidation reaction (EGOR) and methanol oxidation reaction (MOR). Among these, Pt₃₈Au₂₉Ag₃₃ HNDs have the highest mass activity (12364.0 mA mg_Pt^-1/3278.0 mA mg_Pt^-1) for EGOR and MOR, which is 4.2 times and 5.3 times higher than that of commercial Pt/C (2941.0 mA mg_Pt^-1/617.6 mA mg_Pt^-1), respectively. More importantly, after successive cyclic voltammetry tests, the retained mass activities of Pt₃₈Au₂₉Ag₃₃ HNDs are 3913.8 mA mg_Pt^-1 and 348.3 mA mg_Pt^-1, which are much higher than that of commercial Pt/C as well. The excellent catalytic performance of PtAuAg@PtAg HNDs can be attributed to the structure of HNDs, which can greatly increase the surface area and active sites, as well as the electronic and synergistic effects among Pt, Au, and Ag. This research may provide new ideas for the development of high-efficiency hollow catalytic materials for EGOR and MOR.

Surface Plasmon Resonance Boost Electrocatalytic Alcohol Oxidation over Three-Dimensional PdM (M = Au, Ag, Cu) Nanosheet Assemblies

Photoelectrocatalytic nanomaterials are promising for direct alcohol fuel cells, but the construction of high-efficiency catalysts remains difficult. We herein successfully synthesized three-dimensional (3D) PdM nanosheet assemblies (PdM NSAs, M = Au, Ag, and Cu) through a seed-mediated growth method, which displayed a typical 3D nanoflower morphology assembled from many two-dimensional ultrathin nanosheets. Due to the open 3D structure and the synergistic and electronic effects between Pd and Ag, the optimized PdAg NSAs showed the highest mass activity (9378 mA mg^-1) for the ethylene glycol oxidation reaction. More interestingly, when irradiated with visible light, the mass activity increased to 14 590 mA mg^-1, 12.1 times higher than that of the commercial Pd/C (1205 mA mg^-1). In addition, the as-obtained catalysts also showed better long-term durability than that of the commercial Pd/C under the condition of with or without visible-light illumination. This work highlights the utilization of light energy in designing excellent photoelectrocatalysts to promote the photoelectrocatalytic performance of anode catalysts for fuel cells.

Metal-organic interface engineering for coupling palladium nanocrystals over functionalized graphene as an advanced electrocatalyst of methanol and ethanol oxidation

Adjusting the surface structures and electronic structures of metal nanocrystals (NCs) by the metal-organic interface interaction is an emerging strategy to enhance their electrocatalytic behavior. In this work, the d-phenylalanine-functionalized graphene (DPHE-GS) anchoring Pd NCs (denoted as Pd/DPHE-GS) was fabricated via the diazo-reaction followed by a simple chemical reduction. Owing to the metal-organic interface interaction between Pd NCs and DPHE, the size, distribution and electronic structures of Pd NCs on the surface of DPHE-GS can be adjusted. Therefore, the Pd/DPHE-GS shows the highest electrocatalytic activity and the most robust long-term durability and stability towards methanol and ethanol oxidation reaction (MOR and EOR) compared to the commercial Pd/C and other counterparts. This work presents an effective interface engineering strategy to enhance electrocatalytic property.

Rational design of Cu3PdN nanocrystals for selective electroreduction of carbon dioxide to formic acid

The selective electrochemical reduction of CO₂ yields value-added products that are important renewable energy resources for carbon recycling. In this study, Cu₃PdN nanocrystals (NCs) exhibited higher electrocatalytic activity for carbon dioxide (CO₂) reduction to formic acid (HCOOH) than as-prepared Cu₃N and Cu₃Pd NCs. In addition, the reaction yielded small amounts of CO (<5%), H₂, and HCOOH as the main products, and the electrocatalytic activity of the Cu NCs was significantly enhanced by modification with N and Pd. This work demonstrates a simple and effective strategy for improving the electrochemical reduction of CO₂.

Significant promotion effects of Ag oxide towards Pd catalysis for ethanol and methanol oxidation reactions

Ag oxides play a crucial role in promoting the catalysis of Pd both for ethanol and methanol oxidation reactions.