Hydrothermal conversion of waste cartons into a magnetic carbon-iron composite for use as an efficient and recyclable dye adsorbent

Synthesis of green nanosorbent from bovine serum albumin and curcumin for magnetic solid phase extraction of pesticides from food samples

For the first time, a magnetic carbon nanocomposite was synthesized using one-step hydrothermal procedure, employing bovine serum albumin, curcumin, and ferric ammonium citrate. Additionally, the application of this novel composite as an adsorbent for magnetic dispersive solid phase extraction of fungicides and pesticides from water and food samples is a unique aspect of this study. Under optimum conditions (salt concentration: 5.0% w/v, pH: 7.0, desorption solvent: ethanol, sorbent amount: 20 mg, extraction time: 20 min, desorption time: 3 min, stirring rate: 500 rpm, sample volume: 30 mL, extraction temperature: room temperature, and desorption solvent volume: 150 μL) linearity (2.5 to 1400 ng mL-1), coefficients of determination (R2 ≥ 0.997), limits of detection (0.75 to 1.5 ng mL-1), and limits of quantification (2.5 to 5.0 ng mL-1) were achieved. The method validation results showed extraction recovery ranging from 71.2% to 93.4%, and preconcentration factors ranging from 142.5 to 186.1.

Constructing mesoporous biochar derived from waste carton: Improving multi-site adsorption of dye wastewater and investigating mechanism

The development of cost-efficient biochar adsorbent with a simple preparation method is essential to constructing efficient wastewater treatment system. Here, a low-cost waste carton biochar (WCB) prepared by a simple two-step carbonization was applied in efficiently removing Rhodamine B (RhB) in aqueous environment. The maximum ability of WCB for RhB adsorption was 222 mg/g, 6 and 10 times higher than both of rice straw biochar (RSB) and broadbean shell biochar (BSB), respectively. It was mainly ascribed to the mesopore structure (3.0-20.4 nm) of WCB possessing more spatial sites compared to RSB (2.2 nm) and BSB (2.4 nm) for RhB (1.4 nm✕1.1 nm✕0.6 nm) adsorption. Furthermore, external mass transfer (EMT) controlled mass transfer resistance (MTR) of the RhB sorption process by WCB which was fitted with the Langmuir model well. Meanwhile, the adsorption process was dominated by physisorption through van der Waals forces and π-π interactions. A mixture of three dyes in river water was well removed by using WCB. This work provides a straightforward method of preparing mesoporous biochar derived from waste carton with high-adsorption capacity for dye wastewater treatment.

Fe-C-based materials: synthesis modulation for the remediation of environmental pollutants-a review

Presently, the rapid pace in the discovery of emerging aquatic pollutants is increasing the demand for the remediation and treatment of our natural resources. Regarding this, nanotechnology is being considered the potential solution for contaminated water remediation with techniques such as filtration, adsorption, catalysis, and desalination. For this purpose, zerovalent iron (ZVI) is being widely used in the remediation of environmental pollutants due to its large specific surface area and high reactivity. However, ZVI is easy to agglomerate and oxidize, limiting its application in the real environment. Therefore, the present study was designed to discuss the preparation and characterization methods of ZVI composite materials, factors affecting adsorption, the removal effect, and adsorption mechanism of different pollutants by Fe-C materials because the optimization and modification of nano-zero-valent iron is a hot research topic nowadays in this field. Moreover, this paper does also analyze the possibility of the practical application prospects of the team's technology for preparing iron-carbon materials. Thus, this information will be helpful for the development and application of Fe-C-based technologies for water and soil remediation and the prediction of the future research direction of Fe-C composite materials.

Comparative study on the removal of organic pollutants by magnetic composite and pre-magnetized zero-valent iron activated persulfate

The rapid development of global logistics has led to the overuse of packaging cartons, causing problems for municipal solid waste disposal. Diverse methods of exploiting the potential value of waste cartons are needed. Herein, we fabricated a magnetic composite (MC) from waste cartons via a one-step hydrothermal treatment and characterized. Using methylene blue (MB) as a model organic pollutant, tests of the activation of persulfate (PS) via the MC for the removal of MB were performed. Meanwhile, a comparison with activation with pre-magnetized zero-valent iron (Pre-ZVI/PS) was made. The comparative results show that the removal of MB was successfully accomplished with both Pre-ZVI/PS and MC/PS. Specifically, MC/PS could remove almost 100 % of MB, with the COD removal efficiency reaching over 70 % when the MB concentration was 50 mg/L at 80 min under different pH conditions. Even when reused twice, the MC still displayed robust activation performance. Additionally, we evaluated the lifetime of magnetic memory for Pre-ZVI, and first found its consecutive loss of pre-magnetization over 30 days, corresponding to the incremental attenuation of reaction rate constants in the Pre-ZVI-activated PS process. Overall, activating PS using the MC is a promising advanced oxidation technology and also provides a valuable reference on the valorization of lignocellulosic biomass.

One-pot hydrothermal preparation of manganese-doped carbon microspheres for effective deep removal of hexavalent chromium from wastewater

Mn-doped activated carbon microspheres (MnO_x/ACS) with super-high adsorption capacities and deep removal capability for hexavalent chromium (Cr(VI)) were successfully prepared via an ammonium persulfate-assisted hydrothermal method followed by potassium oxalate activation using KMnO₄ and sucrose as raw materials. Their -physical and chemical properties, as well as those of Mn-doped non-activated carbon spheres (MnO_x/CS), were characterized by XRD, SEM, TEM, EDS-mapping, XPS, N₂ adsorption-desorption, ICP-AES, and elemental analysis. It was found that the manganese oxide (MnO_x) particles were uniformly embedded within the carbon spheres via layer-by-layer capture, and the MnO_x/ACS exhibited strong redox activity because of the multivalent nature of MnO_x, resulting in excellent adsorption performance via reduction. In particular, MnO_x/ACS-4 with a Mn content of 1.06 wt% and a specific surface area of 1405.7 m² g^-1 achieved a maximum adsorption capacity of 660.7 mg g^-1; this can reduce Cr(VI) content to less than 0.05 mg L^-1, which meets the corresponding Chinese drinking water quality standard when the initial concentration of Cr(VI) is less than 400 mg L^-1. Furthermore, this highly efficient method can be extended to prepare V-, Mo-, or W-doped carbon microspheres with significantly enhanced adsorption performance for Cr(VI) compared to bare activated carbon sphere, indicating their good application prospect for the deep removal for heavy metal ions from wastewater.