High performance of the A-Mn2O3 nanocatalyst for persulfate activation: Degradation process of organic contaminants via singlet oxygen

Comparative study of reactive oxygen species and tetracycline degradation pathways in catalytic peroxodisulfate activation by asymmetric mesoporous TiO2 and the corresponding controlled-release materials

The removal of trace amounts of antibiotics from water environments while simultaneously avoiding potential environmental hazards during the treatment is still a challenge. In this work, green, harmless, and novel asymmetric mesoporous TiO2 (A-mTiO2) was combined with peroxodisulfate (PDS) as active components in a controlled-release material (CRM) system for the degradation of tetracycline (TC) in the dark. The formation of reactive oxygen species (ROS) and the degradation pathways of TC during catalytic PDS activation by A-mTiO2 powder catalysts and the CRMs were thoroughly studied. Due to its asymmetric mesoporous structure, there were abundant Ti3+/Ti4+ couples and oxygen vacancies in A-mTiO2, resulting in excellent activity in the activation of PDS for TC degradation, with a mineralization rate of 78.6%. In CRMs, ROS could first form during PDS activation by A-mTiO2 and subsequently dissolve from the CRMs to degrade TC in groundwater. Due to the excellent performance and good stability of A-mTiO2, the resulting constructed CRMs could effectively degrade TC in simulated groundwater over a long period (more than 20 days). From electron paramagnetic resonance analysis and TC degradation experiments, it was interesting to find that the ROS formed during PDS activation by A-mTiO2 powder catalysts and CRMs were different, but the degradation pathways for TC were indeed similar in the two systems. In PDS activation by A-mTiO2, besides the free hydroxyl radical (·OH), singlet oxygen (1O2) worked as a major ROS participating in TC degradation. For CRMs, the immobilization of A-mTiO2 inside CRMs made it difficult to capture superoxide radicals (·O2-), and continuously generate 1O2. In addition, the formation of sulfate radicals (·SO4-), and ·OH during the release process of CRMs was consistent with PDS activation by the A-mTiO2 powder catalyst. The eco-friendly CRMs had a promising potential for practical application in the remediation of organic pollutants from groundwater.

Lattice oxygen activation of MnO2 by CeO2 for the improved degradation of bisphenol A in the peroxymonosulfate-based oxidation

The structure of MnO2 was modified by constructing the composites CeO2/ MnO2 via a facile hydrothermal method. The catalytic performance of optimal composite (Mn-Ce10) in peroxymonosulfate (PMS) activation for the degradation of bisphenol A (BPA) is approximately three times higher than that of MnO2 alone. The average valence of manganese in CeO2/MnO2 is lowered compared to MnO2, which induces the generation of more free radicals, such as OH and SO4•-. In addition, the composite exhibits a higher concentration of oxygen vacancies than MnO2, facilitating bondingwith PMS to produce more singlet oxygen (1O2). Moreover, the incorporation of CeO2 activates the lattice oxygen of MnO2, improving its oxidative ability. Consequently, approximately 48% of BPA decomposition in 10min is attributed to direct oxidation in the Mn-Ce10/PMS system, whereas only 36% occurs in 30min for the MnO2/PMS system. Simulation results confirm weakened Mn-O covalency and elongated Mn-O bonds due to the activation of lattice oxygen in CeO2/MnO2, demonstrating that PMS tends to be adsorbed on the composite rather than on MnO2. This work establishes a relationship between lattice oxygen and the degradation pathway, offering a novel approach for the targeted regulation of catalytic oxidation.

Tetracycline removal using NaIO4 activated by MnSO4: Design and optimization via response surface methodology

The appearance of recalcitrant organic pollutants such as antibiotics in water bodies has gained a lot of attention owing to their adverse effects on organisms and humans. The current study aims to develop a novel approach to eliminate antibiotic tetracycline (TC) from a synthetic aqueous solution based on the advanced oxidation process triggered by MnSO4-catalyzed NaIO4. A single-factor experiment was performed to observe the impact of pH, NaIO4 concentration, and MnSO4 dosage on TC decomposition, and a three-factor, three-level response surface experiment with TC removal rate as the dependent variable was designed based on the range of factors determined from the single-factor experiment. The single-factor experiment revealed that the ranges of pH, NaIO4 concentration, and MnSO4 dosage need to be further optimized. ANOVA (analysis of variance) results showed that the data from the response surface experiment were consistent with the quadratic model with high R2 (0.9909), and the predicted values were very close to the actual values. After optimization by response surface methodology, the optimal condition obtained was pH = 6.7, [NaIO4] = 0.39 mM, and [MnSO4] = 0.12 mM, corresponding to a TC removal of 96.56%. This optimization condition was fully considered to save the dosage of the high-priced chemical NaIO4.

Singlet oxygen in the removal of organic pollutants: An updated review on the degradation pathways based on mass spectrometry and DFT calculations

The degradation of pollutants by a non-radical pathway involving singlet oxygen (1O2) is highly relevant in advanced oxidation processes. Photosensitizers, modified photocatalysts, and activated persulfates can generate highly selective 1O2 in the medium. The selective reaction of 1O2 with organic pollutants results in the evolution of different intermediate products. While these products can be identified using mass spectrometry (MS) techniques, predicting a proper degradation mechanism in a 1O2-based process is still challenging. Earlier studies utilized MS techniques in the identification of intermediate products and the mechanism was proposed with the support of theoretical calculations. Although some reviews have been reported on the generation of 1O2 and its environmental applications, a proper review of the degradation mechanism by 1O2 is not yet available. Hence, we reviewed the possible degradation pathways of organic contaminants in 1O2-mediated oxidation with the support of density functional theory (DFT). The Fukui function (FF, f-, f+, and f0), HOMO-LUMO energies, and Gibbs free energies obtained using DFT were used to identify the active site in the molecule and the degradation mechanism, respectively. Electrophilic addition, outer sphere type single electron transfer (SET), and addition to the hetero atoms are the key mechanisms involved in the degradation of organic contaminants by 1O2. Since environmental matrices contain several contaminants, it is difficult to experiment with all contaminants to identify their intermediate products. Therefore, the DFT studies are useful for predicting the intermediate compounds during the oxidative removal of the contaminants, especially for complex composition wastewater.

S modified manganese oxide for high efficiency of peroxydisulfate activation: Critical role of S and mechanism

Mn₂O₃ as a typical Mn based semiconductor has attracted growing attention due to its peculiar 3d electron structure and stability, and the multi-valence Mn on the surface is the key to peroxydisulfate activation. Herein, an octahedral structure of Mn₂O₃ with (111) exposed facet was synthesized by a hydrothermal method, which was further sulfureted to obtained a variable-valent Mn oxide for the high activation efficiency of peroxydisulfate under the light emitting diode irradiation. The degradation experiments showed that under the irradiation of 420 nm light, S modified manganese oxide showed an excellent removal for tetracycline within 90 min, which is about 40.4% higher than that of pure Mn₂O₃. In addition, the degradation rate constant k of S modified sample increased 2.17 times. Surface sulfidation not only increased the active sites and oxygen vacancies on the pristine Mn₂O₃ surface, but also changed the electronic structure of Mn due to the introduce of surface S^2-. This modification accelerated the electronic transmission during the degradation process. Meanwhile, the utilization efficiency of photogenerated electrons was greatly improved under light. Besides, the S modified manganese oxide had an excellent reuse performance after four cycles. The scavenging experiments and EPR analyses showed that •OH and ¹O₂ were the main reactive oxygen species. This study therefore provides a new avenue for further developing manganese-based catalysts towards high activation efficiency for peroxydisulfate.

Stable and recyclable FeS-CMC-based peroxydisulfate activation for effective bisphenol A reduction: performance and mechanism

In this study, a novel material, iron sulfide modified by sodium carboxymethyl cellulose (FeS-CMC), was successfully synthetized for peroxydisulfate (PDS) activation to remove bisphenol A (BPA). Characterization results showed that FeS-CMC had more attachment sites for PDS activation due to its higher specific surface area. A stronger negative potential contributed to preventing nanoparticles from reuniting in the reaction and improving the interparticle electrostatic interactions of the materials. Fourier transform infrared spectrometer (FTIR) analysis of FeS-CMC suggested that the coordination of the ligand for combining sodium carboxymethyl cellulose (CMC) with FeS was monodentate. A total of 98.4% BPA was decomposed by the FeS-CMC/PDS system after 20 min under optimized conditions (pH = 3.60, [FeS-CMC] = 0.05 g/L and [PDS] = 0.88 mM). The isoelectric point (pH_pzc) of FeS-CMC is 5.20, and FeS-CMC contributed to reducing BPA under acidic conditions but showed a negative effect under basic conditions. The presence of HCO₃^-, NO₃^- and HA inhibited BPA degradation by FeS-CMC/PDS, while excess Cl^- accelerated the reaction. FeS-CMC exhibited excellent performance in oxidation resistance with a final removal degree of 95.0%, while FeS was only 20.0%. Furthermore, FeS-CMC showed excellent reusability and still reached 90.2% after triple reusability experiments. The study confirmed that the homogeneous reaction was the primary part of the system. Surface-bound Fe(II) and S (-II) were found to be the major electron donors during activation, and the reduction of S (-II) contributed to the cycle of Fe(III)/Fe(II). Sulfate radicals (SO₄^•-), hydroxyl radicals (•OH), superoxide radicals (O₂^•-) and singlet oxygen (¹O₂) were produced at the surface of FeS-CMC and accelerated the decomposition of BPA. This study offered a theoretical basis for improving the oxidation resistance and reusability of iron-based materials in the presence of advanced oxidation processes.

A comprehensive review on persulfate activation treatment of wastewater

With increasingly serious environmental pollution and the production of various wastewater, water pollutants have posed a serious threat to human health and the ecological environment. The advanced oxidation process (AOP), represented by the persulfate (PS) oxidation process, has attracted increasing attention because of its economic, practical, safety and stability characteristics, opening up new ideas in the fields of wastewater treatment and environmental protection. However, PS does not easily react with organic pollutants and usually needs to be activated to produce oxidizing active substances such as sulfate radicals (SO₄^-) and hydroxyl radicals (OH) to degrade them. This paper summarizes the research progress of PS activation methods in the field of wastewater treatment, such as physical activation (e.g., thermal, ultrasonic, hydrodynamic cavitation, electromagnetic radiation activation and discharge plasma), chemical activation (e.g., alkaline, electrochemistry and catalyst) and the combination of the different methods, putting forward the advantages, disadvantages and influencing factors of various activation methods, discussing the possible activation mechanisms, and pointing out future development directions.

Prospecting carbon-based nanomaterials for the treatment and degradation of endocrine-disrupting pollutants

The presence of endocrine-disrupting chemicals (EDCs) in water resources has significant negative implications for the environment. Traditional technologies implemented for water treatment are not completely efficient for removing EDCs from water. Therefore, research on sustainable remediation has been mainly directed to novel decontamination approaches including nano-remediation. This emerging technology employs engineered nanomaterials to clean up the environment quickly, efficiently, and sustainably. Thus, nanomaterials have contributed to a wide variety of remediation techniques like adsorption, filtration, coagulation/flocculation, and so on. Among the vast diversity of decontamination technologies catalytic advanced oxidation processes (AOPs) outstand as simple, clean, and efficient alternatives. A vast diversity of catalysts has been developed demonstrating high efficiencies; however, the search for novel catalysts with enhanced performances continues. In this regard, nanomaterials used as nanocatalysts are exhibiting enhanced performances on AOPs due to their special nanostructures and larger specific surface areas. Therefore, in this review we summarize, compare, and discuss the recent advances on nanocatalysts, catalysts doped with metal-based nanomaterials, and catalysts doped with carbon-based nanomaterials on the degradation of EDCs. Finally, further research opportunities are identified and discussed to achieve the real application of nanomaterials to efficiently degrade EDCs from water resources.

Insight into the role of Fe in the synergetic effect of persulfate/sulfite and Fe2O3@g-C3N4 for carbamazepine degradation

In this work, the role of Fe in the synergetic effect of persulfate/sulfite and Fe₂O₃@g-C₃N₄ (FCN) for carbamazepine (CBZ) degradation was studied. Unexpectedly, Fe₂O₃ in FCN plays very different roles for sulfite [S(IV)] and persulfate (PS) activation. Specifically, since photo-generated holes (h⁺) can transform S(IV) into SO₄^-, and photo-generated electrons (e^-) can accelerate Fe(III) reduction which promotes transition metal based S(IV) activation, a synergetic effect of photocatalysis and Fe is observed in FCN/S(IV)/vis system. In contrast, in FCN/PS/vis system, both Fe(III)/Fe(II) cycle and PS activation compete for e^-. Since PS is a stronger electron acceptor, Fe(III) reduction by e^- is limited. Therefore, the contribution of Fe₂O₃ in FCN/S(IV)/vis system is 3 times higher than that in FCN/PS/vis system. Initial pH affects CBZ removal by changing surface charge of catalysts and oxidants species, while the effect varies for different catalysts and oxidants. This study provides new insight into the synergetic effect of photocatalysis and transition metal for SO₄^- generation, which contributes to catalyst design for environmental application.

Efficient purification of tetracycline wastewater by activated persulfate with heterogeneous Co-V bimetallic oxides

The persistence and wide dispersion of antibiotics have a severe impact on the ecological environment. Developing an effective method with universal applicability to remove pollutants is pretty necessary. Herein, a bimetallic oxides (Co₃V₂O₈) heterogeneous material was successfully prepared and used to activate the persulfate (PS) for purification of tetracycline (TC) wastewater. By exploring the reaction conditions and influencing factors, the removal rate of 50 mg⋅L^-1 TC reached 87.1% by Co₃V₂O₈/PS system, and the reaction rate constant was up to 0.0271 min^-1. As a highly efficient catalyst for the activation of PS, Co₃V₂O₈/PS system produces radicals of SO₄^•-, •OH, •O₂^- and ¹O₂ in the reaction process due to the Co(II) and V(IV) exchange electrons with S₂O₈^2- and O₂. Simultaneously, the internal electron exchange occurs between Co(II)/Co(III) and V(IV)/V(V), which stabilizes the content of Co(II) and V(IV). This work provides a novel activator for PS activation to degrade contaminants and contributes to a better understanding of the PS activation mechanism by transition compound.

A novel chitosan-urea encapsulated material for persulfate slow-release to degrade organic pollutants

A novel eco-friendly material (CS-U@PS) for persulfate slow-release to effectively degrade organic pollutants (methyl orange and pyrene) was synthesized using chitosan and urea as the encapsulated framework materials via an emulsion cross-linking method for the first time. The obtained CS-U@PS exhibits spherical shapes with a uniform size of approximately 2-3 µm according to the particle-size distribution and SEM image results. The slow-release mechanism was proposed through a kinetics model study and the Ritger-Peppas model fit well (r² = 0.9699) to indicate that the slow-release process is non-Fickian diffusion. The influences of urea and PS dosages and oxidative conditions on methyl orange degradation were studied, and all the results suggested that urea played an important role in PS slow-release and can also catalyze the activation of PS by iron to further produce radicals and improve the removal efficiency of pollutants. A pyrene removal rate of 90.53% was achieved in aqueous solutions and an above 80% removal rate was obtained in weakly acidic or neutral soil environments by CS-U@PS activated by Fe²⁺ with citric acid as the chelating agent. Therefore, the fabricated slow-release oxidation materials exhibit application potential for the remediation of organic polluted groundwater and soil.

Visible Light-Induced Catalyst-Free Activation of Peroxydisulfate: Pollutant-Dependent Production of Reactive Species

Activation of peroxydisulfate (PDS, S₂O₈^2-) via various catalysts to degrade pollutants in water has been extensively investigated. However, catalyst-free activation of PDS by visible light has been largely ignored. This paper reports effective visible light activation of PDS without any additional catalyst, leading to the degradation of a wide range of organic compounds of high environmental and human health concerns. Importantly, the formation of reactive species is distinctively different in the PDS visible light system with and without pollutants [e.g., atrazine (ATZ)]. In addition to SO₄^•- generated via S₂O₈^2- dissociation under visible light irradiation, O₂^•- and ¹O₂ are also produced in both systems. However, in the absence of ATZ, H₂O₂ and O₂^•- are key intermediates and precursors for ¹O₂, whereas in the presence of ATZ, a different pathway was followed to produce O₂^•- and ¹O₂. Both radical and nonradical processes contribute to the degradation of ATZ in the PDS visible light system. The active role of ¹O₂ in the degradation of ATZ besides SO₄^•- is manifested by the enhanced degradation of contaminants and electron paramagnetic resonance spectroscopy measurements in D₂O.

Monodisperse-porous Mn5O8 microspheres as an efficient catalyst for fast degradation of organic pollutants via peroxymonosulfate activation

Monodisperse-porous Mn5O8 microspheres with multiple oxidation states were used as a highly stable, efficient heterogeneous catalyst for the fast degradation of organic pollutants via peroxymonosulfate activation.

Impact of chloride ions on activated persulfates based advanced oxidation process (AOPs): A mini review

Chloride ion (Cl^-) is ever-present in aquatic environments. Different Cl^- concentration have been reported in industrial water (760 mM), surface water (<21 mM), seawater (540 mM) and groundwater (<21 mM) which could potentially accumulate into large concentrations in the sea. This mini-review examines more than 200 studies and found that Cl^- ions can react with strong oxidants (SO₄^•-, ^•OH, and HSO₅^-) generated from persulfate activation, inducing the formation of chlorine radicals, that can either (1) directly react with organics or (2) generate chlorine radicals that can participate in the conversion of the organic substrate. Although the impact of chloride radicals have been identified as either negligible, positive, or negative (inhibitive) at different Cl^- concentrations, only a few studies have considered the possible generation of chlorinated by-products. Another essential detail that is often neglected is the mutagenicity and toxicity of these products, as only a few studies have reported on the biotoxicity, AOX (adsorbable organic halogen) and the degree of mineralization of Cl^- containing persulfate activated AOPs (Advanced Oxidation Process). Future studies need to consider the chemical analysis of the degradation products as well as the mutagenicity, toxicity and the biological effects pre and post-oxidation process. This evaluation will address several key issues including the properties, occurrence, and toxicity of the chlorinated products, which can significantly benefit its application in a large-scale environmental application.

A Review of Manganese(III) (Oxyhydr)Oxides Use in Advanced Oxidation Processes

The key role of trivalent manganese (Mn(III)) species in promoting sulfate radical-based advanced oxidation processes (SR-AOPs) has recently attracted increasing attention. This review provides a comprehensive summary of Mn(III) (oxyhydr)oxide-based catalysts used to activate peroxymonosulfate (PMS) and peroxydisulfate (PDS) in water. The crystal structures of different Mn(III) (oxyhydr)oxides (such as α-Mn₂O₃, γ-MnOOH, and Mn₃O₄) are first introduced. Then the impact of the catalyst structure and composition on the activation mechanisms are discussed, as well as the effects of solution pH and inorganic ions. In the Mn(III) (oxyhydr)oxide activated SR-AOPs systems, the activation mechanisms of PMS and PDS are different. For example, both radical (such as sulfate and hydroxyl radical) and non-radical (singlet oxygen) were generated by Mn(III) (oxyhydr)oxide activated PMS. In comparison, the activation of PDS by α-Mn₂O₃ and γ-MnOOH preferred to form the singlet oxygen and catalyst surface activated complex to remove the organic pollutants. Finally, research gaps are discussed to suggest future directions in context of applying radical-based advanced oxidation in wastewater treatment processes.

Degradation of antibiotics in aqueous media using manganese nanocatalyst-activated peroxymonosulfate

ε-MnO₂ effectively activates peroxymonosulfate (PMS) for the efficient degradation of emerging pollutants. ε-MnO₂ was synthesized by a facile thermal-treatment method and its long-term stability and efficiency for the elimination of emerging pollutants, including sulfamethoxazole (SMX), sulfachloropyridazine (SCP), sulfamethazine (SMT), ciprofloxacin (CIP), and azithromycin (AZI), from aqueous media were evaluated. ε-MnO₂ was found to activate PMS more efficiently than α-MnO₂, β-MnO₂, or δ-MnO₂, owing to its high - OH-group content, unique structure, and high surface area. Sulfate (SO₄^•-), hydroxyl (•OH), and superoxide (O₂^•-) radicals, as well as singlet oxygen (¹O₂) were generated, with O₂^•- acting as the ¹O₂ precursor. The ε-MnO₂/PMS system proved to be effective in the pH range of 3.5-9.0 and the rate of SMX degradation was not significantly affected by the presence of inorganic anions or natural organic matter. The proposed pathway for the activation of PMS by ε-MnO₂ includes inner-sphere interactions between ε-MnO₂ and PMS, and electron transfer to PMS via the MnIII ↔ MnIV redox cycle, which generates reactive oxygen species. These findings provide new insight into PMS activation by less-toxic metal oxides as catalysts and demonstrate that Mn-based materials can be used to effectively treat water matrices containing emerging pollutants.