Modulating oxygen vacancies on bismuth-molybdate hierarchical hollow microspheres for photocatalytic selective alcohol oxidation with hydrogen peroxide production

In-situ construct CuInS2/Bi/Bi2MoO6 S-scheme/Schottky dual heterojunctions catalyst for enhanced photocatalytic degradation of diclofenac sodium

In this paper, the S-scheme/Schottky heterojunction photocatalyst (CuInS2/Bi/Bi2MoO6, CIS/Bi/BMO) was successfully constructed via a facile in-situ solvothermal method, aimed at enhancing its photocatalytic performance. The results of the study on the photocatalytic degradation of diclofenac sodium (DCF) under simulated solar light irradiation revealed that the as-prepared composite exhibited remarkable catalytic efficiency in comparison to the pristine Bi2MoO6 and CuInS2. The plasmonic bismuth (Bi) was formed during the solvothermal process. Subsequently, CuInS2 and Bi were grown on the surface of Bi2MoO6 leading to forming CIS/BMO S-scheme heterojunction, along with a Schottky junction between Bi and Bi2MoO6. The use of ethylene glycol as a support was the main reason for the significant improvement in photocatalytic efficiency in the degradation of DCF. Moreover, the probable photocatalytic mechanisms for the degradation of DCF had been proposed based on the active species quenching experiments. The eleven degradation products were detected by HPLC-MS, and the degradation reaction pathway of DCF was deduced. Additionally, the CIS/Bi/BMO photocatalyst exhibited a consistently high removal rate after four cycles. This study proposes a new strategy for designing efficient S-scheme/Schottky heterojunction photocatalysts for solar energy conversion.

Recent progress in defect-engineered metal oxides for photocatalytic environmental remediation

Rapid industrial advancement over the last few decades has led to an alarming increase in pollution levels in the ecosystem. Among the primary pollutants, harmful organic dyes and pharmaceutical drugs are directly released by industries into the water bodies which serves as a major cause of environmental deterioration. This warns of a severe need to find some sustainable strategies to overcome these increasing levels of water pollution and eliminate the pollutants before being exposed to the environment. Photocatalysis is a well-established strategy in the field of pollutant degradation and various metal oxides have been proven to exhibit excellent physicochemical properties which makes them a potential candidate for environmental remediation. Further, with the aim of rapid industrialization of photocatalytic pollutant degradation technology, constant efforts have been made to increase the photocatalytic activity of various metal oxides. One such strategy is the introduction of defects into the lattice of the parent catalyst through doping or vacancy which plays a major role in enhancing the catalytic activity and achieving excellent degradation rates. This review provides a comprehensive analysis of defects and their role in altering the photocatalytic activity of the material. Various defect-rich metal oxides like binary oxides, perovskite oxides, and spinel oxides have been summarized for their application in pollutant degradation. Finally, a summary of existing research, followed by the existing challenges along with the potential countermeasures has been provided to pave a path for the future studies and industrialization of this promising field.

Hollow Nanoreactors for Controlled Photocatalytic Behaviors: Fundamental Theory, Structure-Performance Relationship, and Catalytic Advantages

Hollow nanoreactors (HoNRs) have regarded as an attractive catalytic material for photocatalysis due to their exceptional capabilities in enhancing light harvesting, facilitating charge separation and transfer, and optimizing surface reactions. Developing novel HoNRs offers new options to realize controllable catalytic behavior. However, the catalytic mechanism of photocatalysis occurring in HoNRs has not yet been fully revealed. Against this backdrop, this review elaborates on three aspects: 1) the fundamental theoretical insights of HoNRs-driven photocatalytic kinetics; 2) structure-performance relationship of HoNRs to photocatalysis; 3) catalytic advantages of HoNRs in photocatalytic applications. Specifically, the review focuses on the fundamental theories of HoNRs for photocatalysis and their structural advantages for strengthening light scattering, promoting charge separation and transfer, and facilitating surface reaction kinetics, and the relationship between key structural parameters of HoNRs and their photocatalytic performance is in-depth discussed. Also, future prospects and challenges are proposed. It is anticipated that this review paper will pave the way for forthcoming investigations in the realm of HoNRs for photocatalysis.

New visible-light-driven Bi2MoO6/Cs3Sb2Br9 heterostructure for selective photocatalytic oxidation of toluene to benzaldehyde

Herein, new Bi2MoO6/Cs3Sb2Br9 heterostructure (BiMo/CSB) was investigated for the first time as a visible-light-driven photocatalyst for C(sp3)-H bond activation using molecular oxygen as a green oxidant and toluene as a model substrate. The optimized BiMo/CSB photocatalyst exhibited enhanced toluene oxidation activity (2,346 μmol g-1h-1), which was almost two- and five-fold that of pristine CSB (1,165 μmol g-1h-1) and BiMo (482 μmol g-1h-1), respectively. The improved photocatalytic performance was essentially attributed to the formation of staggered band energy lineup in the BiMo/CSB hybrid, which promoted S-scheme charge transfer across the BiMo/CSB heterointerface as supported by ultraviolet photoelectron spectroscopy (UPS), density functional theoretical (DFT), time-resolve photoluminescence (TRPL), and photoelectrochemical studies. Spin-trapping electron paramagnetic resonance (EPR) and radical scavenging studies revealed that photoinduced hole, molecular oxygen, and superoxide radical are key active species in this photocatalytic system. The developed BiMo/CSB catalyst provided good selectivity toward benzaldehyde product (94-98 %), presumably due to the inhibiting effect of benzyl alcohol on benzaldehyde oxidation. No significant change in structure and morphology was observed for the spent catalyst, however small negative shift of Sb 3d and Bi 4f binding energy was found suggesting partial reduction of Sb3+ and Bi3+. This work not only provides a new visible-light-driven photocatalyst for C(sp3)-H bond activation but also opens the doors for exploitation of the conversion and functionalization of this inert bond toward the production of high value-added organic chemicals.

Co-construction of oxygen doping and van der walls heterojunction in O-CB/ZnIn2S4 promoting photocatalytic production and activation of H2O2 for the degradation of antibiotics

The in situ production of H2O2 by photocatalysis have shown a sustainable strategy for water remediation, but the peroxide evolution capacity are still unsatisfactory. Herein, we ingeniously design oxygen-doped carbon black/zinc indium sulfide (O-CB/ZnIn2S4) composites for photocatalytic production and activation of H2O2 to degrade antibiotics. The rich oxygen dopants and van der walls heterojunction between O-CB and ZnIn2S4 promoted charge transfer, oxygen adsorption and reduction for peroxide generation. The optimized O-CB/ZnIn2S4-2 composites exhibited ultrahigh H2O2 production rate (1985 μmol/g/h) in pure water (pH=7) without sacrificial reagents and aeration assistance, which was 2 times, 3 times, and 12 times higher than CB/ZnIn2S4-2, ZnIn2S4 and O-CB, respectively. Additionally, O-CB/ZnIn2S4-2 composites exhibited considerable amount of OH of 30 μmol/L in 60 min, which was originated from the reduction of innergenerate-H2O2 by photogenerated electrons and direct photolysis. The degradation and quenching experiments shows that the innergenerate-H2O2 contributed to the rapid degradation and deep mineralization of tetracycline antibiotics(tetracycline, oxytetracycline, chlortetracycline hydrochloride). Moreover, intermediates analysis and toxicity estimation further confirm the significant mineralization and toxicity decrease during the degradation of oxytetracycline by O-CB/ZnIn2S4-2. The work provides deep insights into the crucial role of dopants and heterojunction in promoting H2O2 production and activation.

Enhancing Photocatalytic Degradation via the Synergetic Effect of Vacancies and Built-In Potential in a BiOCl/BiVO4 p-n Heterojunction

Photoinduced charge separation and surface reactions are essential for ensuring high quantum efficiency of the photochemical and photophysical processes. BiVO4-based heterojunctions are promising materials for high-performance photocatalysts; however, their photocatalytic performance is significantly lower than the theoretical limit due to the sluggish water oxidation dynamics and rapid recombination of charge carriers on the catalyst surface. To address these issues, oxygen vacancies (OVs) are introduced to a rationally designed BiVO4-based heterojunction using built-in potential and gradient OVs to promote the separation of carriers and increase the photocatalytic activity. The heterojunctions with OVs exhibit a 2-fold increase in the photocatalytic activity for phenol degradation compared with that of pristine BiVO4. Additionally, density functional theory is applied to elucidate the synergistic mechanism of light absorption and charge separation in BiOCl/BiVO4 p-n heterojunction photocatalysts containing vacancies. The obtained results demonstrate a synergistic effect of vacancies and the built-in potential, providing a pathway for defect engineering in photocatalytic processes.

Enhanced Photocatalytic Activity of Hyper-Cross-Linked Polymers Toward Amines Oxidation Coupled with H2 O2 Generation through Extending Monomer's Conjugation Degree

Visible-light-driven amines oxidation coupled with hydrogen peroxide (H₂ O₂ ) generation is a promising way to convert solar energy to chemical energy. Herein, a series of hyper-cross-linked polymers (HCPs) photocatalysts with different arenes monomers, including benzene (BE), diphenyl (DP), p-terphenyl (TP), or p-quaterphenyl (QP), were synthesized by simple Friedel-Crafts alkylation reaction. Owing to the maximum monomer's conjunction degree and excellent oxygen (O₂ ) adsorption capacity, QP-HCPs exhibited highest photocatalytic activity for benzylamine oxidation coupled with H₂ O₂ generation under the irradiation of 455 nm Blue LED lamp. More than 99 % of benzylamine could be converted to N-benzylidenebenzylamine within 60 min. In addition, nearly stoichiometric H₂ O₂ was synchronously obtained with a high production rate of 9.3 mmol g_cat ^-1 h^-1 . Our work not only demonstrated that the photocatalytic activity of HCPs photocatalysts significantly depends on monomer's conjunction degree, but also provided a new strategy for converting solar energy to chemical energy.

Interspersing CdS nanodots into iodine vacancy-rich BiOI sphere for photocatalytic lignin valorization

Flower-like BiOI was decorated by CdS nanodots and followed by the introduction of iodine vacancies (V_I) for photocatalytic sodium lignosulfonate (SLS) valorization under visible light. The iodine vacancies could adjust the band configuration, strengthen the light absorption and act as electron traps, while the intimate contact between BiOI and CdS nanodots provides a high-speed channel for charge transfer. As a consequence, the photocatalytic performance of SLS conversion into value-added vanillin was greatly improved over CdS/BiOI-V_I compared with those of CdS, BiOI and CdS/BiOI. The highest yield of vanillin is 10.95 mg/g_SLS over CdS/BiOI-V_I, about 5, 8.7, 1.3 times those of CdS, BiOI, CdS/BiOI, respectively, and exceeding most related photocatalysts reported elsewhere. More significantly, as to the lignin from Masson pine and alkali lignin, the corresponding vanillin yield can reach 7.04 and 6.54 mg/g_lignin, respectively, under the same condition, which suggests the great potential and universality for photocatalytic lignin valorization over such CdS/BiOI-V_I heterostructure.

Visible Light-Active Ternary Heterojunction Photocatalyst for Efficient CO2 Reduction with Simultaneous Amine Oxidation and Sustainable H2O2 Production

The present work described a unique approach for CO₂ reduction to methanol along with the oxidation of various amines to the corresponding imines and photocatalytic H₂O₂ production from H₂O and molecular O₂ using a heterojunction photocatalyst made up of ZnIn₂S₄/Ni₁₂P₅/g-C₃N₄(NCZ) under visible light irradiation. The photocatalysts were synthesized via a high-temperature treatment of nickel and phosphorous precursors with g-C₃N₄ followed by decoration of ZnIn₂S₄. The synthesized photocatalysts were characterized using various spectroscopic and microscopic techniques. The density functional theory (DFT) studies suggested the participation of the valence band maximum (VBM) from Ni₁₂P₅ and the conduction band maximum (CBM) from ZnIn₂S₄ in the ternary NCZ heterojunction. The ternary composite exhibited superior photocatalytic activity compared to that of its individual components due to the formation of a heterojunction, thereby enhancing the transfer efficiency of electrons from the conduction band of g-C₃N₄ to that of ZnIn₂S₄ using Ni₁₂P₅ as an electron bridge. Moreover, the reduced band gap of the ternary heterojunction played a key role in its higher efficiency.

Oxygen vacancies assist a facet effect to modulate the microstructure of TiO2 for efficient photocatalytic O2 activation

Defect engineering is recognized as an effective route to obtaining highly active photocatalytic materials. However, the current understanding of the role of defects in photocatalysts mainly comes from their independent functional analysis, ignoring the synergy between defects and the chemical environment, especially with crystal facets. Herein, oxygen vacancy (V_O)-rich TiO₂ nanostructures with different dominant exposed facets were prepared, and the microstructural changes induced by the synergy between the V_O and facet effect and the performance difference of photocatalytic O₂ activation were explored. The results showed that the combination of high concentration V_O and the {101} facet is more conducive to improving the photocatalytic performance of TiO₂, which is significantly superior to the combination of low concentration V_O and the {101} facet as well as the combination of high concentration V_O and the {001} facet. The experimental and theoretical results clarified the dependence of each stage of photocatalysis on two factors. Specifically, V_O plays a more significant role in energy band regulation, improving the dynamic behavior of photogenerated charges and enhancing the adsorption and activation of O₂, while the facet effect made more contributions to reducing the thermodynamic energy barrier of ROS formation and conversion. The excellent ability of O₂ activation enables T101-V_O to show potential application characteristics in the removal of RhB and bacterial disinfection. This work established a link between defect and facet effects, providing new insights into understanding defect function in photocatalysts.

Electrostatic interaction and surface S vacancies synergistically enhanced the photocatalytic degradation of ceftriaxone sodium

ZnIn₂S₄ ultrathin 2D nanosheets with a positive surface charge are synthesized by a hydrothermal method and different contents of surface S vacancies are induced via heat treatment of as-prepared ZnIn₂S₄ (ZIS). As the S vacancies contents increased, the photocatalytic degradation efficiency of ceftriaxone (CTRX) sodium is promoted. Especially, ZIS-300 shows the best degradation efficiency (88.8%) for an initial CTRX concentration of 10 mg L^-1 in 2 h. It is found that S vacancies cause the electron density of surface metal atoms (Zn, In) to be decreased, which makes the effective adsorption and activation of ceftriaxone anions through electrostatic adsorption interactions. Meanwhile, S vacancies also serve as active centers to promote the absorption of O₂ and gather electrons to form •O₂^- species. The photogenerated holes quickly transfer to the surface of the catalyst to directly degrade the adsorbed CTRX. Thus, the photocatalytic CTRX degradation efficiency is significantly improved. Finally, a possible mechanism for over defective ZIS is proposed. This work provides a feasible strategy for the efficient degradation of antibiotics from the perspective of electrostatic adsorption and molecule activation.

Synthesis of Z-schemes 0D–3D heterojunction bi-functional photocatalyst with ZnInCuS alloyed QDs supported BiOI MF for H2O2 production and N2 fixation

Photocatalytic H2O2 and NH3 production on Zn–Cu–In–S QDs coupled with BiOI MFs via a Z-scheme charge transfer dynamic.

Construction of a Z-scheme Ag2MoO4/BiOBr heterojunction for photocatalytically removing organic pollutants

How to facilitate photogenerated-carrier separation is an important step in developing excellent semiconductor photocatalysts for environmental pollutant removal. Herein, Ag₂MoO₄ (AMO) nanoparticles were assembled onto the surface of BiOBr (BOB) nanosheets to construct a highly efficient Z-scheme AMO/BOB heterojunction photocatalyst. Several analytical techniques were used to elucidate the characteristics and photocatalytic mechanism of the AMO/BOB heterojunction. Photodegradation experiments for removing methylene blue under simulated-sunlight irradiation reveal that a 20%AMO/BOB heterojunction exhibits excellent photodegradation activity with η(30 min) = 93.8% and k_app = 0.08638 min^-1, which were greater by 4.5 and 5.6 times in comparison with that of pure BOB and AMO, respectively. Based on the experimental and density functional theory (DFT) calculation results, it is proposed that the Z-scheme carrier transfer/separation mechanism dominates the enhanced photodegradation performance of the composite photocatalysts. Additionally, the potential application of AMO/BOB photocatalysts in degrading various organic pollutants (including organic dyes, antibiotics and other serious organic pollutants) was also investigated.

Synthesis of Fe3O4@CdS@CQDs ternary core-shell heterostructures as a magnetically recoverable photocatalyst for selective alcohol oxidation coupled with H2O2 production

Photocatalytic aerobic oxidation of aromatic alcohols to corresponding aldehydes coupled with producing hydrogen peroxide (H₂O₂) represents one of the most efficient strategies for converting solar energy into chemical energy. In this work, a magnetically recoverable photocatalyst of Fe₃O₄@CdS@CQDs ternary core-shell heterostructures is elaborately fabricated through the hydrothermal growth of CdS on Fe₃O₄ nanospheres with in-situ incorporation of carbon quantum dots (CQDs) and used for selective alcohol oxidation coupled with H₂O₂ production. The Fe₃O₄@CdS@CQDs photocatalyst possess distinct advantages of full solar spectral absorption, efficient charge separation, and high stability. The Fe₃O₄-nanosphere cores not only endow photocatalyst with the characteristics of magnetic recovery but also form Fe₃O₄@CdS Z-scheme heterojunction to prevent CdS from photocorrosion. The in-situ modified CQDs act as charge mediators to accelerate the photogenerated electron-hole separation and afford active sites to facilitate H₂O₂ production. As a result, the Fe₃O₄@CdS@CQDs photocatalyst exhibits excellent performance in selectively converting benzyl alcohol to benzaldehyde accompanied with H₂O₂ production. The generation rates of benzaldehyde and H₂O₂ reach up to 57.22 and 27.06 mmol·g_CdS^-1·h^-1, respectively. This work highlights a rational construction of magnetic heterostructure photocatalyst and its application in the photo-redox coupling reactions.

Cellulose-Derived Carbon Dot-Guided Growth of ZnIn2 S4 Nanosheets for Photocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran

Cellulose-derived carbon (CC) dot-directed growth of ZnIn₂ S₄ was achieved through hydrothermal treatment of carboxylated cellulose followed by in situ growth of ZnIn₂ S₄ nanosheets. The carbon dots inherited from carboxylated cellulose equip plenty of surface carboxyl groups, which induce the ionic interaction with Zn²⁺ and In³⁺ and the guided growth of ZnIn₂ S₄ . As a result, the nanosheets of ZnIn₂ S₄ are evenly and intimately grown on the small carbon dots, providing high-speed channels for charges transfer. In conjunction with the reinforced visible-light capture and good conductivity of carbon dots, the resultant CC/ZnIn₂ S₄ shows an outstanding photocatalytic activity. As a proof-of-concept, visible-light-driven 5-hydroxymethylfurfural oxidation into 2,5-diformylfuran was conducted. The evolution of 2,5-diformylfuran over the optimal CC/ZnIn₂ S₄ sample can reach ∼2980 μmol g^-1 , about 3.4 times that of pristine ZnIn₂ S₄ . Additionally, the apparent quantum yield could attain 3.4 % at a wavelength of 400 nm.

Piezocatalytic and Photocatalytic Hydrogen Peroxide Evolution of Sulfide Solid Solution Nano-Branches from Pure Water and Air

Hydrogen peroxide (H₂ O₂ ) as a useful chemical has a wide range of applications, and the development of efficient semiconducting materials for H₂ O₂ production is deemed as a promising strategy to realize the energy conversion. In this paper, Cd_x Zn_1-x S (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1) nano-branches are fabricated and the piezocatalytic and photocatalytic H₂ O₂ evolution performance are studied. Under ultrasound condition, the H₂ O₂ yield of as-synthesized solid solutions is all higher than those of pristine ZnS and CdS, and optimal evolution rate achieves 21.9 µmol g^-1 h^-1 for Cd_0.5 Zn_0.5 S without any sacrificial agent, while it is increased to 151.6 µmol g^-1 h^-1 under visible light irradiation. The piezo/photoelectrochemical tests, piezoresponse force microscopy (PFM), and computational simulation reveal that the nano-branch structure benefits the mechanical energy conversion more, favoring the H₂ O₂ evolution for Cd_0.5 Zn_0.5 S, and a higher concentration of charge carriers is generated in photocatalysis. The active radical trapping and in situ electron spin resonance (ESR) experiments demonstrate that both of the H₂ O₂ generation pathways are originated from oxygen reduction by the sequential two-step single-electron reaction. This work opens a door for promoting the H₂ O₂ production from nanostructure and solid solution design.

Enhanced photocatalytic benzyl alcohol oxidation over Bi4Ti3O12 ultrathin nanosheets

Ultrathin Bi₄Ti₃O₁₂ nanosheets (NS) with the thickness about 3.9 nm were successfully synthesized by a hydrothermal method and were used as a photocatalyst for the oxidation of benzyl alcohol (BA) to benzaldehyde (BAD). The photocatalytic performance of NS is about 8 times higher than that of bulk Bi₄Ti₃O₁₂. In-situ FTIR of pyridine adsorption and NH₃-TPD reveal that NS has more surface Lewis acid sites (Ti⁴⁺) for the adsorption and activation of BA. The photogenerated electrons (e^-) and holes (h⁺) of NS can be fully used to produce the superoxide radicals and carbon-centered radicals, respectively. The monolayer nanosheet structure of NS not only greatly promotes the separation of photogenerated carriers, but also achieves the efficient activation of BA molecules via the CO⋯Ti coordination. This work successfully reveals the surface/interface interactions between the surface active sites of a photocatalyst and the reactive molecules via using ultrathin nanosheet as a molecular platform.

Facile synthesis of a nano titanium catalyst and its performance in selective oxidation of aromatic and pyridinic alcohols under visible light

The oxidation of alcohols to the corresponding carbonyl compounds is of great significance in chemical synthesis and fine chemical production.

A review on hierarchical Bi2MoO6 nanostructures for photocatalysis applications

This overview provides comprehensive understanding and development trends of hierarchical Bi2MoO6 nanostructures as photocatalysts for efficient photocatalysis applications.

One-pot preparation of multicomponent photocatalyst with (Zn, Co, Ni)(O, S)/Ga2O3 nanocomposites to significantly enhance hydrogen production

To enhance the production of hydrogen, multicomponent photocatalyst (Zn, Co, Ni)(O, S)/Ga2O3 nanocomposites were synthesized and optimized with different amounts of Ga precursor in a relatively low-temperature process.