Facile bioinspired synthesis of iron oxide encapsulating silica nanocapsules

Nanocomposite colloids prepared by the Ouzo effect

HYPOTHESIS

The organization of nanoparticles within nanocomposite colloids can imbue added functionality to these suprastructures. We hypothesize that the arrangement of nanoparticles in nanocomposite colloids can be systematically controlled by inducing co-precipitation of oil and a hydrophilic polymer in the presence of nanoparticles with a range of wetting properties. This process will produce oil core/polymer shell nanocapsules with nanoparticles strategically positioned within the suprastructures.

EXPERIMENTS

Coprecipitation of oil and polymer in the presence of nanoparticles is performed in glass capillary microfluidics. Silica nanoparticles of varying surface properties and morphology are used to investigate the relationship between nanoparticle wetting properties and nanocolloid morphology. The features of the nanocomposites formed are investigated using electron microscopy, sessile drop, and zeta potential measurements.

FINDINGS

When spherical nanoparticles with wetting properties ranging from hydrophilic to hydrophobic are used, the nanocomposite morphologies formed range from nanoparticles partially engulfed in the polymer shell to nanoparticles embedded in the oil core of the nanocapsule. The number of nanoparticles introduced in the nanocomposite is adjusted by changing their concentration in the precursor solution. The structure of nanocolloids formed with non-spherical or hollow silica nanoparticles depends on their wetting properties.

Effect of Inlet Air Temperature and Quinoa Starch/Gum Arabic Ratio on Nanoencapsulation of Bioactive Compounds from Andean Potato Cultivars by Spray-Drying

Nanoencapsulation of native potato bioactive compounds by spray-drying improves their stability and bioavailability. The joint effect of the inlet temperature and the ratio of the encapsulant (quinoa starch/gum arabic) on the properties of the nanocapsules is unknown. The purpose of this study was to determine the best conditions for the nanoencapsulation of these compounds. The effects of two inlet temperatures (96 and 116 °C) and two ratios of the encapsulant (15 and 25% w/v) were evaluated using a factorial design during the spray-drying of native potato phenolic extracts. During the study, measurements of phenolic compounds, flavonoids, anthocyanins, antioxidant capacity, and various physical and structural properties were carried out. Higher inlet temperatures increased bioactive compounds and antioxidant capacity. However, a higher concentration of the encapsulant caused the dilution of polyphenols and anthocyanins. Instrumental analyses confirmed the effective encapsulation of the nuclei in the wall materials. Both factors, inlet temperature, and the encapsulant ratio, reduced the nanocapsules' humidity and water activity. Finally, the ideal conditions for the nanoencapsulation of native potato bioactive compounds were determined to be an inlet temperature of 116 °C and an encapsulant ratio of 15% w/v. The nanocapsules obtained show potential for application in the food industry.

Native Potato Starch and Tara Gum as Polymeric Matrices to Obtain Iron-Loaded Microcapsules from Ovine and Bovine Erythrocytes

Iron deficiency leads to ferropenic anemia in humans. This study aimed to encapsulate iron-rich ovine and bovine erythrocytes using tara gum and native potato starch as matrices. Solutions containing 20% erythrocytes and different proportions of encapsulants (5, 10, and 20%) were used, followed by spray drying at 120 and 140 °C. Iron content in erythrocytes ranged between 2.24 and 2.52 mg of Fe/g; microcapsules ranged from 1.54 to 2.02 mg of Fe/g. Yields varied from 50.55 to 63.40%, and temperature and encapsulant proportion affected moisture and water activity. Various red hues, sizes, and shapes were observed in the microcapsules. SEM-EDS analysis revealed the surface presence of iron in microcapsules with openings on their exterior, along with a negative zeta potential. Thermal and infrared analyses confirmed core encapsulation within the matrices. Iron release varied between 92.30 and 93.13% at 120 min. Finally, the most effective treatments were those with higher encapsulant percentages and dried at elevated temperatures, which could enable their utilization in functional food fortification to combat anemia in developing countries.

Recent Studies and Progress in the Intratumoral Administration of Nano-Sized Drug Delivery Systems

Over the last 30 years, diverse types of nano-sized drug delivery systems (nanoDDSs) have been intensively explored for cancer therapy, exploiting their passive tumor targetability with an enhanced permeability and retention effect. However, their systemic administration has aroused some unavoidable complications, including insufficient tumor-targeting efficiency, side effects due to their undesirable biodistribution, and carrier-associated toxicity. In this review, the recent studies and advancements in intratumoral nanoDDS administration are generally summarized. After identifying the factors to be considered to enhance the therapeutic efficacy of intratumoral nanoDDS administration, the experimental results on the application of intratumoral nanoDDS administration to various types of cancer therapies are discussed. Subsequently, the reports on clinical studies of intratumoral nanoDDS administration are addressed in short. Intratumoral nanoDDS administration is proven with its versatility to enhance the tumor-specific accumulation and retention of therapeutic agents for various therapeutic modalities. Specifically, it can improve the efficacy of therapeutic agents with poor bioavailability by increasing their intratumoral concentration, while minimizing the side effect of highly toxic agents by restricting their delivery to normal tissues. Intratumoral administration of nanoDDS is considered to expand its application area due to its potent ability to improve therapeutic effects and relieve the systemic toxicities of nanoDDSs.

Iron oxide nanoparticles carried by probiotics for iron absorption: a systematic review

BACKGROUND

One-third of the world's population has anemia, contributing to higher morbidity and death and impaired neurological development. Conventional anemia treatment raises concerns about iron bioavailability and gastrointestinal (GI) adverse effects. This research aims to establish how iron oxide nanoparticles (IONPs) interact with probiotic cells and how they affect iron absorption, bioavailability, and microbiota variation.

METHODS

Pointing to the study of the literature and developing a review and critical synthesis, a robust search methodology was utilized by the authors. The literature search was performed in the PubMed, Scopus, and Web of Science databases. Information was collected between January 2017 and June 2022 using the PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) protocols for systematic reviews and meta-analyses. We identified 122 compatible research articles.

RESULTS

The research profile of the selected scientific articles revealed the efficacy of IONPs treatment carried by probiotics versus conventional treatment. Therefore, the authors employed content assessment on four topics to synthesize previous studies. The key subjects of the reviewed reports are the characteristics of the IONPs synthesis method, the evaluation of cell absorption and cytotoxicity of IONPs, and the transport of IONPs with probiotics in treating anemia.

CONCLUSIONS

To ensure a sufficient iron level in the enterocyte, probiotics with the capacity to attach to the gut wall transport IONPs into the enterocyte, where the maghemite nanoparticles are released.

Efficient polymer-mediated delivery system for thiocyclam: Nanometerization remarkably improves the bioactivity toward green peach aphids

The unscientific application of synthetic pesticides has brought various negative effects on the environment, hindering the sustainable development of agriculture. Nanoparticles can be applied as carriers to improve pesticide delivery, showing great potential in the development of pesticide formulation in recent years. Herein, a star polymer (SPc) was constructed as an efficient pesticide nanocarrier/adjuvant that could spontaneously assemble with thiocyclam or monosultap into a complex, through hydrophobic association and hydrogen bonding, respectively, with the pesticide-loading contents of 42.54% and 19.3%. This complexation reduced the particle sizes of thiocyclam from 543.54 to 52.74 nm for pure thiocyclam, and 3 814.16 to 1 185.89 nm for commercial preparation (cp) of thiocyclam. Interestingly, the introduction of SPc decreased the contact angles of both pure and cp thiocyclam on plant leaves, and increased the plant uptake of cp thiocyclam to 2.4-1.9 times of that without SPc. Meanwhile, the SPc could promote the bioactivity of pure/cp thiocyclam against green peach aphids through leaf dipping method and root application. For leaf dipping method, the 50% lethal concentration decreased from 0.532 to 0.221 g/L after the complexation of pure thiocyclam with SPc, and that decreased from 0.390 to 0.251 g/L for cp thiocyclam. SPc seems a promising adjuvant for nanometerization of both pure and cp insecticides, which is beneficial for improving the delivery efficiency and utilization rate of pesticides.

Revealing the role of tunable amino acid residues in elastin-like polypeptides (ELPs)-mediated biomimetic silicification

Elastin-like polypeptides (ELPs) are attractive materials for the green preparation of silica nanoparticles via biomimetic silicification. However, the critical factors affecting the ELP-mediated silicification remain unclear. Herein, the role of tunable amino acid residues of ELPs in silicification was studied using three ELPs (ELPs[V9F-40], ELPs[KV8F-40], and ELPs[K5V4F-40]) and their fusion proteins (ELPs[V9F-40]-SpyCatcher, ELPs[KV8F-40]-SpyCatcher, and ELPs[K5V4F-40]-SpyCatcher) with different contents of lysine residues. Bioinformatics methods were employed for the first time to reveal the key physicochemical parameters correlated with silicification. The specific activity of ELPs was increased with the promotion of lysine content with a high correlation coefficient (R = 0.899). Furthermore, exogenous acidic protein SpyCatcher would hinder the interactions between the silica precursors and ELPs, leading to the significantly decrease in specific activity. The isoelectric point (pI) of ELPs presented the highest correlation to silicification with a coefficient of 0.963. The charges of the ELPs [K5V4F-40] at different pH were calculated based on the sequence or structure. Interestingly, the excellent correlation between charges based on structure and specific activity was obtained. Collectively, the novel methods developed here may pave a new way for rational design of ELPs or other peptides for efficient and green preparation of silica nanomaterials for biomedicine, biocatalysis, and biosensor.

Magnetic Nanoparticles for Protein Separation and Purification

Proteins are essential for various functions such as brain activity and muscle contraction in humans. Even though food is a source of proteins, the bioavailability of proteins in most foods is usually limited due to matrix interaction with other biomolecules. Thus, it is essential to extract these proteins and provide them as a nutraceutical supplement to maintain protein levels and avoid protein deficiency. Hence, protein purification and extraction from natural sources are highly significant in biomedical applications. Chromatography, crude mechanical disruption, use of extractive chemicals, and electrophoresis are some of the methods applied to isolate specific proteins. Even though these methods possess several advantages, they are unable to extract specific proteins with high purity. A suitable alternative is the use of nanoparticles, which can be beneficial in protein purification and extraction. Notably, magnetic iron and iron-based nanoparticles have been employed in protein extraction processes and can be reused via demagnetization due to their magnetic property, smaller size, morphology, high surface-to-volume ratio, and surface charge-mediated property. This chapter is a summary of various magnetic nanoparticles (MNPs) that can be used for the biomolecular separation of proteins.

Recent advancement of bioinspired nanomaterials and their applications: A review

With the advancement in the field of nanotechnology, different approaches for the synthesis of nanomaterials have been formulated, among which the bioinspired or biomimetic nanoplatforms have been utilized for different biomedical applications. In this context, bioinspired or biomimetic nanoparticles (NPs) have been synthesized in which the inspiration for synthesis is taken from nature or its components. Innovations in bioengineering tools and bio-conjugation chemistry have enabled scientists to develop novel types of such nanoplatforms. They have several advantages over normal synthesis protocols. In this review, we 1) summarized nanomaterial types and their advancements in bioinspired nanotechnology therapies; 2) discussed the major types, novel preparation methods, and synthesis progress of NPs in current biomedical fields; 3) gave a brief account of the need for synthesizing NPs via a bioinspired route rather than their common route; 4) highlighted the updated information on the biomimetic synthesis of different types of NPs; and 5) provided future perspectives in the synthesis of novel NPs for their potential applications in biomedical sciences.

Theranostics platform of Abemaciclib using magnetite@silica@chitosan nanocomposite

The current study was designed to synthesize a nanoformula comprising of magnetite nanoparticles (MN) with mesoporous silica (MS), which was in turn coated with chitosan (CS) and further loaded with a chemotherapeutic agent, Abemaciclib (ABE). The prepared formula, MN@MS@CS@ABE, was characterized by XRD, FTIR, HRTEM, FESEM, DLS, VSM, BET, and BJH. The ABE loading capacity and entrapment efficiency were calculated, and an in vitro drug release experiment was conducted. Cytoxicity was studied by the MTT assay. The formula was investigated as an anticancer agent versus MCF-7 cells by performing Annexin V-FITC flow cytometry and cell cycle analysis. Furthermore, we examine the formula as a contrast agent in magnetic resonance imaging (MRI). ABE loading and encapsulation efficiency were 24.2 % and 63.4 %, respectively. The formula demonstrated sustained drug release behavior for 72 h. The MTT assay revealed a higher cytotoxicity of free ABE in MCF-7 cells compared to MN@MS@CS@ABE. Flow cytometry revealed early and late phases of apoptosis and necrosis with different percentages. The formula stimulated a reduction in signal intensity in the MR T2-weighted imaging technique. In conclusion, the current study developed a nanoformula which could be a promising theranostic agent in cancer therapy and diagnosis.

Microencapsulation of Erythrocytes Extracted from Cavia porcellus Blood in Matrices of Tara Gum and Native Potato Starch

Ferropenic anemy is the leading iron deficiency disease in the world. The aim was to encapsulate erythrocytes extracted from the blood of Cavia porcellus, in matrices of tara gum and native potato starch. For microencapsulation, solutions were prepared with 20% erythrocytes; and encapsulants at 5, 10, and 20%. The mixtures were spray-dried at 120 and 140 °C. The iron content in the erythrocytes was 3.30 mg/g and between 2.32 and 2.05 mg/g for the encapsulates (p < 0.05). The yield of the treatments varied between 47.84 and 58.73%. The moisture, water activity, and bulk density were influenced by the temperature and proportion of encapsulants. The total organic carbon in the atomized samples was around 14%. The particles had diverse reddish tonalities, which were heterogeneous in their form and size; openings on their surface were also observed by SEM. The particle size was at the nanometer level, and the zeta potential (ζ) indicated a tendency to agglomerate and precipitation the solutions. The presence of iron was observed on the surface of the atomized by SEM-EDX, and FTIR confirmed the encapsulation due to the presence of the chemical groups OH, C-O, C-H, and N-H in the atomized. On the other hand, high percentages of iron release in vitro were obtained between 88.45 and 94.71%. The treatment with the lowest proportion of encapsulants performed at 140 °C obtained the best results and could potentially be used to fortify different functional foods.