Mesoporous nanostructures of NiCo-LDH/ZnCo2O4 as an efficient electrocatalyst for oxygen evolution reaction

Construction of porous flower-like Ru-doped CoNiFe layered double hydroxide for supercapacitors and oxygen evolution reaction catalysts

In recent years, ternary layered double hydroxide (LDH) has become a research hotspot for electrode materials and oxygen evolution reaction (OER) catalyst due to the enhanced synergistic effect between individual elements. However, the application of LDH is greatly limited by its low electrical conductivity and the disadvantage that nanosheets tend to accumulate and mask the active sites. Herein, a novel Ru-doped CoNiFe - LDH was prepared via a facile hydrothermal method. According to the density functional theory (DFT) calculations, the doping of Ru element could improve electron state density and band gaps of LDH and consequently boosted the electrochemical reaction kinetics as well as electrical conductivity. Furthermore, introduction of Ru atom induced the formation of porous flower-like structures in nanosheets. Compared to CoNiFe - LDH (28.9 m2/g), Ru-doped CoNiFe - LDH performed larger specific surface area of 53.1 m2/g, resulting in more electrochemically active sites. In these case, Ru-doped CoNiFe - LDH demonstrated better energy storage performance of 176.0 mAh/g at 1 A/g compared to original CoNiFe - LDH (78.9 mAh/g at 1 A/g). Besides, the assembled Ru-doped CoNiFe - LDH//activated carbon (AC) device delivered a maximum energy density of 36.4 W h kg-1 at the power density of 740.3 W kg-1 and an outstanding cycle life (78.7 % after 10,000 cycles). Meanwhile, Ru-doped CoNiFe - LDH exhibited lower overpotential (339 mV at 50 mA cm-2) and Tafel slope (93.2 mV dec-1). Therefore, this work provided novel and valuable insights into the rational doping of Ru elements for the controlled synthesis of supercapacitor electrode materials and OER catalysts.

Controlled three-dimensional leaf-like NiCoO2@NiCo layered double hydroxide heterostructures for oxygen evolution electrocatalysts in rechargeable Zn-air batteries

Rechargeable zinc-air batteries (ZABs) have garnered attention as a viable choice for large-scale energy storage due to their advantageous characteristics, such as high energy density and cost-effectiveness. Strategies aimed at improving the kinetics of the oxygen evolution reaction (OER) through advanced electrocatalytic materials or structural designs can significantly enhance the efficiency and longevity of ZABs. In this study, we introduce a three-dimensional (3D) leaf-vein system heterojunction architecture. In this structure, NiCoO2 nanowire arrays form the central vein, surrounded by an outer leaf composed of NiCo layered double hydroxide (LDH) nanosheets. All these components are integrated onto a substrate made of Ni foam. Notably, when tested in an alkaline environment, the NiCoO2@NiCo LDH exhibited an overpotential of 272 mV at a current density of 10 mA cm-2, and extended durability evaluations over 12 h underscored its robustness at 99.76 %. The rechargeable ZABs achieved a peak power density of 149 mW cm-2. Furthermore, the NiCoO2@NiCo LDH demonstrated stability by maintaining high round-trip efficiencies throughout more than 680 cycles (equivalent to 340 h) under galvanostatic charge-discharge cycling at 5 mA cm-2. The leaf-vein system heterojunction significantly increased the active sites of the catalysts, facilitating charge transport, improving electronic conductivity, and enhancing overall stability.

Synthesis of NiFe-layered double hydroxides using triethanolamine-complexed precursors as oxygen evolution reaction catalysts: effects of Fe valence

The synthesis of highly efficient NiFe-layered double hydroxides (NiFe-LDHs) to catalyze the oxygen evolution reaction (OER) is urgent and challenging. Herein, NiFe-FeCl3-x and NiFe-FeCl2-x samples (where FeCl3 and FeCl2 represent the Fe sources and x represents the imposed reaction time: 6, 12, and 24 h) were prepared via one-pot hydrothermal synthesis using Fe sources characterized by Fe(III) or Fe(II) valence states. In the presence of triethanolamine, when FeCl3 was used as the Fe source, pure NiFe-LDH was obtained, whose crystallinity increased with increasing hydrothermal treatment time. In contrast, when FeCl2 was used as the Fe source, a mixture of NiFe-LDH, Fe2O3, and trace amounts of Fe3O4 was obtained. The content of NiFe-LDH in the mixture increased under longer hydrothermal treatment and NiFe-FeCl3-x catalysts exhibited better OER performance than NiFe-FeCl2-x catalysts. Specifically, NiFe-FeCl3-6 afforded the highest OER performance with an overpotential of 246.8 mV at 10 mA cm-2 and a Tafel slope of 46.1 mV dec-1. Herein, we investigated the effects of the valence state of Fe precursors on the structures and OER activities of the prepared catalysts; the mechanism of NiFe-LDH formation via hydrothermal synthesis in the presence of triethanolamine was also proposed.

Interface engineering of NiS/NiCo2S4 heterostructure with charge redistribution for boosting overall water splitting

Developing highly efficient bifunctional non-noble metal-based electrocatalysts is pivotal to fulfilling practical water electrolysis. In this work, NiS/NiCo2S4 heterostructured electrocatalysts are prepared through a simply controlling sulfurization process by employing a one-pot solvothermal strategy. The alteration of cobalt addition amount can affect the crystalline phase, morphology, and catalytic activity of the resulting heterostructured materials. The successful integration of NiS with NiCo2S4 is realized by deliberately tuning the cobalt addition amount. The resulting Co-Ni-S5:1 delivers high activity with low overpotentials of 198 and 259 mV to attain 10 mA cm-2 when used as electrocatalysts toward hydrogen evolution reaction and oxygen evolution reaction, respectively. Experimental and theoretical calculations evidence the strong interface coupling between NiS and NiCo2S4 leads to increased electronic conductivity, electron migration near lattice-matched interface and interfacial charge redistribution, thereof enhancing the reaction kinetics rate and activity. Moreover, the potential application is demonstrated by employing Co-Ni-S5:1 in a two-electrode electrolyzer which can efficiently catalyze water electrolysis and work stably for 100 h. This work not only provides highly efficient bifunctional heterostructured electrocatalysts by simply regulating the metal components in sulfides but also further broadens the application of interface engineering.

NiCo layered double hydroxides/NiFe layered double hydroxides composite (NiCo-LDH/NiFe-LDH) towards efficient oxygen evolution in different water matrices

Engineering robust non-noble metal electrocatalysts towards efficient impure water (e.g., seawater, wastewater) oxidation is a prospective approach to achieve carbon neutrality via accelerating green hydrogen energy development. Herein, a NiCo layered double hydroxides (LDH)/NiFe LDH composite (NiCo-LDH/NiFe-LDH) was developed for oxygen evolution reaction (OER) via a hydrothermal process-electrodeposition method. The optimal NiCo-LDH/NiFe-LDH-30 composite only needed an overpotential (η) of 240 mV to drive 100 mA/cm2 in alkalized freshwater, with a low Tafel slope of 16.6 mV/dec and good stability for over 90 h. Further analyses suggested that the strong interface interaction between NiCo-LDH and NiFe-LDH accelerated the oxygen gas bubble evolution and boosted interfacial charge transfer, and the formed built-in electric field and higher oxidation state species (metal oxyhydroxides) contributed to the high intrinsic catalytic activity. The NiCo-LDH/NiFe-LDH-30 composite also held excellent OER activities in different impure water environments, including alkaline 0.5 M NaCl solution (η100 = 333 mV), alkaline lake water (η100 = 345 mV), and alkaline wastewater treatment plant (WWTP) effluent (η100 = 320 mV). More importantly, the potential effects of Cl- and CO32- in impure water were revealed during the OER process. This work elaborates on the role of built-in electric field and the strong coupling interaction in composite catalysts, which pave the way for the design of cost-effective catalysts with excellent adaptability in different water environments.

Tiny Ni3S2 boosting MoS2 hydrogen evolution in alkali by enlarging coupling boundaries and stimulating basal plane

The relatively slow reaction kinetics of the hydrogen evolution reaction (HER) by water electrolysis in alkali hinder its large-scale industrial production. To improve the HER activity in alkaline media, a novel Ni₃S₂/MoS₂/CC catalytic electrode was synthesized by a simple two-step hydrothermal method in this work. The modification of MoS₂ by Ni₃S₂ could facilitate the adsorption and dissociation of water, thus accelerating the alkaline HER kinetics. Moreover, the unique morphology of small Ni₃S₂ nanoparticles grown on MoS₂ nanosheets not only increased the interface coupling boundaries, which acted as the most efficient active sites for the Volmer step in alkaline medium, but also sufficiently activated the MoS₂ basal plane, thus providing more active sites. Consequently, Ni₃S₂/MoS₂/CC only needed overpotentials of 189.4 and 240 mV to drive current densities of 100 and 300 mA·cm^-2, respectively. More importantly, its catalytic performance of Ni₃S₂/MoS₂/CC even exceeded that of Pt/C at a high current density after 261.7 mA·cm^-2 in 1.0 M KOH.

Morphology Modulation and Phase Transformation of Manganese-Cobalt Carbonate Hydroxide Caused by Fluoride Doping and Its Effect on Boosting the Overall Water Electrolysis

Increasing demands for pollution-free energy resources have stimulated intense research on the design and fabrication of highly efficient, inexpensive, and stable non-noble earth-abundant metal catalysts with remarkable catalytic activity for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Morphology control of the catalysts is widely implemented as an effective strategy to change the surface atomic coordination and increase the catalytic behavior of the catalysts. In this study, we have designed a series of Mn-Co catalyts with different morphologies on the graphite paper substrate to enhance OER and HER activities in alkaline media. The prepared catalysts with different morphologies were successfully obtained by adjusting the amount of ammonium fluoride (NH₄F) in the hydrothermal process. The electrochemical tests display that the cubic-like Mn-Co catalyst with pyramids on the faces at a concentration of 0.21 M NH₄F exhibits the best activity toward both OER and HER. The cubic-like Mn-Co catalyst with pyramids on the faces showed overpotentials of 240 and 82 mV at a current density of 10 mA cm^-2 for OER and HER, respectively. Also, the cubic-like Mn-Co catalyst with pyramids on the faces required overpotentials of 319 and 216 mV to reach the current density of 100 mA cm^-2 for OER and HER, respectively. The current density of this catalyst at η = 0.32 V was 701.05 mA cm^-2 for OER, and for HER, the current density of the catalyst was 422.89 mA cm^-2 at η = 0.23 V. The Tafel slopes of the Mn-Co catalyst with cubic-like structures with pyramids on the faces were 78 and 121 mV dec^-1 for OER and HER, respectively. A two-electrode overall water electrolysis system using this bifunctional Mn-Co catalyst exhibited low cell voltages of 1.60 in the alkaline electrolyte at the standard current density of 10 mA cm^-2 with appropriate stability. These electrochemical merits exhibit the considerable potential of the cubic-like Mn-Co catalyst with pyramids on the faces for bifunctional OER and HER applications.

Revealing the surface structure-performance relationship of interface-engineered NiFe alloys for oxygen evolution reaction

NiFe alloys are among the most promising electrocatalysts for oxygen evolution reaction (OER). However, a comprehensive study is yet to be done to reveal the surface structure-performance relationship of NiFe alloys. In particular, the role of the ultrathin surface oxide layer, which is unavoidable for pure NiFe alloys, is always neglected. Herein, a series of NiFe alloys with different Ni/Fe ratios are fabricated. It is found that different Ni/Fe ratios lead to significant differences in surface composition and structure of the NiFe alloys, and thus affect their catalytic performance. Then, the oxide/metal interface of the Ni₄Fe₁ alloy is tailored by adjusting the hydrogenation temperature to further understand the surface structure-activity relationship, and the optimal OER performance is achieved at the oxide/metal interfaces that have suitable surface Fe/Ni ratio and an appropriate amount of oxygen vacancies. In-situ Raman characterization shows that the Ni₄Fe₁ alloy with well-tailored oxide/metal interface facilitates the formation of active species. Density functional theory calculations demonstrate that the ultrathin surface oxide layers are responsible for the high catalytic activity of the NiFe alloys, and that the quantity of oxygen vacancies in the surface oxides affects the adsorption energy of O* and thus to a great extent determines the catalytic activity.

3D hierarchical ZnCo2S4@Ni(OH)2 nanowire arrays with excellent flexible energy storage and electrocatalytic performance

It is essential for energy storage and conversion systems to construct electrodes and electrocatalysts with superior performance. In this work, ZnCo₂S₄@Ni(OH)₂ nanowire arrays are synthesized on nickel foam by hydrothermal methods. As a supercapacitor electrode, the ZnCo₂S₄@Ni(OH)₂ structure exhibits a specific capacitance of 1,263.0C g^-1 at 1 A g^-1. The as-fabricated ZnCo₂S₄@Ni(OH)₂//active carbon device can achieve a maximum energy density of 115.4 Wh kg^-1 at a power density of 5,400 W kg^-1. As electrocatalysts, the ZnCo₂S₄@Ni(OH)₂ structure delivers outstanding performance for oxygen evolution reaction (an overpotential of 256.3 mV at 50 mA cm^-2), hydrogen evolution reaction (141.7 mV at 10 mA cm^-2), overall water splitting (the cell voltage of 1.53 V at 50 mA cm^-2), and a high stability for 13 h.

Heterostructured ZnCo2O4-CoOOH nanosheets on Ni foam for a high performance bifunctional alkaline water splitting catalyst

It is of utmost importance to explore bifunctional electrocatalysts for water splitting. Herein, unique ZnCo₂O₄-CoOOH heterostructured ultrathin nanosheets on Ni foam are reported that combines a two-step hydrothermal method. This catalyst exhibits excellent catalytic performances to achieve a current density of 10 mA cm^-2 with an ultralow overpotential of 115 mV for HER, attaining an overpotential of 238 mV at 20 mA cm^-2 for OER. Remarkably, ZnCo₂O₄-CoOOH/Ni shows a voltage of 1.494 V to drive a current density of 10 mA cm^-2. Such performances are due to the inter-penetrative pores present in the ultrathin nanosheets that provide large surface areas and expose massive active sites to enhance activities. In addition, the unique nanosheet structure and the 3D Ni foam substrate possess large specific surface areas, which can facilitate mass diffusion. This excellent performance is ascribed to the ZnCo₂O₄-CoOOH heterostructure that manipulates strong synergy to improve the electrochemical activity. This study offers new insight on an innovative approach for the exploitation of effective bifunctional electrocatalysts with a heterostructure.

Dual-Metal Zeolitic Imidazolate Framework Derived Highly Ordered Hierarchical Nanoarrays on Self-Supported Carbon Fiber for Oxygen Evolution

The construction of highly ordered hierarchical nanoarrays is crucial for obtaining effective transition metal carbon nanomaterial electrocatalysts for oxygen evolution reaction (OER) in water splitting. Herein, we adopted a Co metal zeolitic imidazolate framework (Co-ZIF) as a precursor by ion-exchange/etching reaction with Fe(NO₃)₃ to obtain hierarchical N-doped Co-Fe layered double hydroxide (CoFe-LDH) in situ generated in Co-ZIF nanoarrays based on a self-supported carbon cloth (CC) substrate noted as CoFe-LDH@Co-ZIF@CC. Benefiting from the synergistic effect of these species and their highly ordered self-supported nanoarray structure, the catalytic active sites were fully exposed and highly protected in alkaline electrolyte, which significantly promoted electron transport and improved electrochemical performance. The CoFe-LDH@Co-ZIF@CC exhibited the low overpotentials of about 225 and 319 mV at 10 and 100 mA cm⁻² with a small Tafel slope of 81.8 mV dec⁻¹ recorded in a 1.0 M KOH electrolyte. In addition, it also showed a long-term durability without obvious decay after 30 h. Therefore, its remarkable OER activity demonstrates this material’s promising application in the green hydrogen energy industry.

Layered FeCoNi double hydroxides with tailored surface electronic configurations induced by oxygen and unsaturated metal vacancies for boosting the overall water splitting process

Two-dimensional (2D) layered double hydroxides (LDH) with excellent hydrophilic ability and rapid hydroxyl insertion are regarded as one of the most promising electrocatalysts for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) for overall water splitting to produce hydrogen. However, the electrocatalytic HER/OER activities can be restricted by the inert basal plane due to the poor conductivity, deficient active sites and inferior durability despite there being efficient active sites in the material edge. Thus, capturing many more exposed reactive sites to facilitate the rapid reaction kinetics is a crucial strategy. In this paper, both oxygen and unsaturated metal vacancies with FeCoNi LDH materials are generated through a surface activation approach by pre-covering of fluoride and a post-boronizing process. Such a material is grown on Ni foam to form an F-FeCoNi-Ov LDH/NF electrocatalyst. The activated surface of the electrocatalyst with oxygen vacancies and unsaturated metal sites shows enhanced electroconductivity for regulating the surface electronic structure and optimizing the surface adsorption energy for intermediates during HER/OER processes. As a result, this electrocatalyst exhibits excellent electrocatalytic performance for both the HER and OER with low overpotentials, small Tafel slopes and long durability. The enhancement mechanism is also studied deeply for fundamental understanding. For performance validation, an F-FeCoNi-Ov LDH/NF∥F-FeCoNi-Ov LDH/NF water splitting cell is fabricated and needs only 1.54 V and 1.81 V to reach current densities of 10 and 100 mA cm^-2, respectively. This work provides a practicable strategy to develop 2D LDH nanomaterials with boosted electrocatalytic activity for sustainable and clean energy storage systems.

A CoNi telluride heterostructure supported on Ni foam as an efficient electrocatalyst for the oxygen evolution reaction

The excellent oxygen evolution reaction performance of a CoNi telluride heterostructure (0.4CoNi LDH@Te-180C) can be attributed to the inherent layered structure, interconnected nanoarray structures and the synergistic effect of Co and Ni species.

Engineering a NiAl-LDH/CoSx S-Scheme heterojunction for enhanced photocatalytic hydrogen evolution

The use of semiconductors to construct heterojunctions to suppress the rapid recombination of photogenerated charges and holes is considered to be an effective way to improve the efficiency of photocatalytic hydrogen evolution. Herein, cobalt sulfide (CoS_x) nanoparticles are cultivated in situ in the folds of three-dimensional flower-like nickel-aluminium layered double hydroxides (NiAl-LDHs) using a facile solvothermal method. The hydrogen production rate of the binary CoS_x/NiAl-LDH heterojunction reaches 3678.59 μmol/g/h, which is 83.74 and 22 times the rates of CoS_x and NiAl-LDH, respectively. The unique three-dimensional structure of NiAl-LDH facilitates the growth of CoS_x and shortens the transfer pathway of photogenerated electrons. More importantly, the built-in electric field formed at the interface and the S-type charge transport mechanism caused by the bending of the energy band enhance not only charge separation but also maintain the strong oxidation ability of the holes. In this study, the newly designed S-scheme heterojunction offers a new strategy for enhancing photocatalytic water splitting.

Recent Progress on Transition Metal Based Layered Double Hydroxides Tailored for Oxygen Electrode Reactions

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), namely, so-called oxygen electrode reactions, are two fundamental half-cell reactions in the energy storage and conversion devices, e.g., zinc–air batteries and fuel cells. However, the oxygen electrode reactions suffer from sluggish kinetics, large overpotential and complicated reaction paths, and thus require efficient and stable electrocatalysts. Transition-metal-based layered double hydroxides (LDHs) and their derivatives have displayed excellent catalytic performance, suggesting a major contribution to accelerate electrochemical reactions. The rational regulation of electronic structure, defects, and coordination environment of active sites via various functionalized strategies, including tuning the chemical composition, structural architecture, and topotactic transformation process of LDHs precursors, has a great influence on the resulting electrocatalytic behavior. In addition, an in-depth understanding of the structural performance and chemical-composition-performance relationships of LDHs-based electrocatalysts can promote further rational design and optimization of high-performance electrocatalysts. Finally, prospects for the design of efficient and stable LDHs-based materials, for mass-production and large-scale application in practice, are discussed.

Constructing 1D Boron Chains in the Structure of Transition Metal Monoborides for Hydrogen Evolution Reactions

The forms of boron atoms are many and varied in the structure of transition metal borides (TMBs). The form of boron atoms determines the structure, morphology, and properties of borides. Herein, transition metal monoborides (CrB and WB) with different arrangement of one-dimensional (1D) boron chains were synthesized under high pressures and high temperatures. The 1D boron chains between the interlayers of CrB are parallel to one another, while the 1D boron chains between the interlayers of WB are perpendicular to one another. The morphologies of CrB and WB also show large differences due to the difference in 1D boron chain arrangement. As electrocatalysts for hydrogen evolution reactions (HERs), CrB and WB show good catalysis activity and durability. WB has the smallest overpotential (210 mV) and Tafel slope (90.09 mV dec−1), which is mainly attributed to the intercrossing boron chains improving the electrical properties of WB, as well as the 5d electrons of W being more chemically active. The TOF value of WB is 1.35 s−1, proving that WB has a higher intrinsic catalytic activity during HERs. This work provides a data reference for the development of high-efficiency electrocatalysts.