Z-scheme WOx/Cu-g-C3N4 heterojunction nanoarchitectonics with promoted charge separation and transfer towards efficient full solar-spectrum photocatalysis

Efficient photocatalytic in-situ Fenton degradation of 2,4-dichlorophenol via anthraquinone-modified carbon nitride for 2e- oxygen reduction

Constructing a photocatalytic in-situ Fenton system (PISFs) is a promising strategy to address the need for continuous hydrogen peroxide (H2O2) addition and the low efficiency of H2O2 activation for hydroxyl radical generation in the traditional Fenton reaction. In this study, we constructed a photocatalytic in-situ Fenton system using anthraquinone-modified carbon nitride (AQ-C3N4) for efficient pollutant degradation. The resultant AQ-C3N4 not only enhanced the production of H2O2 but also increased the generation of hydroxyl radical (·OH). Experimental results demonstrated that, the apparent rate constant for the degradation of 2,4-Dichlorophenol (2,4-DCP) by AQ-C3N4-PISFs was 0.145 min-1, which is 2.74 times higher than that of C3N4 under visible light. Density functional theory (DFT) calculations indicate that AQ modification promotes electron-hole separation while increasing the adsorption energy of O2. Independent gradient model (IGM) analysis based on Hirshfeld Partition revealed that van der Waals interactions between AQ-C3N4 and 2,4-DCP promoted the degradation process. This work provides new ideas to overcome the problems of continuous addition of H2O2 and low utilization of ·OH that exist in conventional Fenton system.

Advances in the heterostructures for enhanced hydrogen production efficiency: a comprehensive review

The growing global energy demand and heightened environmental consciousness have contributed to the increasing interest in green energy sources, including hydrogen production. However, the efficacy of this technology is contingent upon the efficient separation of charges, high absorption of sunlight, rapid charge transfer rate, abundant active sites and resistance to photodegradation. The utilization of photocatalytic heterostructures coupling two materials has proved to be effective in tackling the aforementioned challenges and delivering exceptional performance in the production of hydrogen. The present article provides a comprehensive overview of operational principles of photocatalysis and the combination of photocatalytic and piezo-catalytic applications with heterostructures, including the transfer behavior and mechanisms of photoexcited non-equilibrium carriers between the materials. Furthermore, the effects of recent advances and state-of-the-art designs of heterostructures on hydrogen production are discussed, offering practical approaches to form heterostructures for efficient hydrogen production.

Liquid-Liquid and Liquid-Solid Interfacial Nanoarchitectonics

Nanoscale science is becoming increasingly important and prominent, and further development will necessitate integration with other material chemistries. In other words, it involves the construction of a methodology to build up materials based on nanoscale knowledge. This is also the beginning of the concept of post-nanotechnology. This role belongs to nanoarchitectonics, which has been rapidly developing in recent years. However, the scope of application of nanoarchitectonics is wide, and it is somewhat difficult to compile everything. Therefore, this review article will introduce the concepts of liquid and interface, which are the keywords for the organization of functional material systems in biological systems. The target interfaces are liquid-liquid interface, liquid-solid interface, and so on. Recent examples are summarized under the categories of molecular assembly, metal-organic framework and covalent organic framework, and living cell. In addition, the latest research on the liquid interfacial nanoarchitectonics of organic semiconductor film is also discussed. The final conclusive section summarizes these features and discusses the necessary components for the development of liquid interfacial nanoarchitectonics.

CDs-g-C3N4-oleaginous yeast hybrid system: Microbial lipid synthesis and fermentation residual reutilization

The utilization of solar energy and fast-growing heterotrophic microbes for biofuel production has been recognized as a promising approach to achieve carbon neutrality and address energy crisis. In this work, we synthesized different kinds of photocatalysts based on graphitic carbon nitride (g-C3N4). We found that carbon dots modified-graphitic carbon nitride (CDs-g-C3N4) showed the highest photocatalytic activity. Subsequently, we developed a photocatalyst-microbe hybrid (PMH) system by combining CDs-g-C3N4 with an oleaginous yeast strain, Cutaneotrichosporon dermatis ZZ-46. Under visible light irradiation, the lipid yield of this PMH system reached 1.70 g/L at 120 h, representing a 36 % increase compared to the control. The photocatalytic reaction-induced ROS and the reductive photogenerated electrons facilitated ZZ-46 cells to synthesize more lipids. Furthermore, the fermentation residual of this PMH system was reutilized to prepare biochar via pyrolysis. The biochar generated at 550 °C (BC-550) demonstrated exceptional adsorption capabilities, particularly with a 57 % adsorption rate for methylene blue (MB), and maintained its perfect adsorption efficacy even after five regeneration cycles. These results offer promising avenues for addressing energy shortages and environmental contamination.

Rational design of Bi2Sn2O7/Bi5O7I S-scheme heterojunction for visible photocatalytic oxidation of emerging pollutants

The construction of an S-scheme heterostructure is considered as a promising strategy for enhancing photocatalytic performance. Herein, a three-dimensional Bi5O7I (BOI) microsphere decorated with Bi2Sn2O7 (BSO) nanoparticles was prepared for the first time via a simple ultrasonic-assisted electrostatic self-assembly strategy and used for the degradation of 2,4-dinitrophenylhydrazine. 3 wt% Bi2Sn2O7/Bi5O7I has the highest degradation activity (93.7 %), with an apparent rate constant of 0.0848 min-1, which is 2.55 times that of the original Bi5O7I (0.0333 min-1). Moreover, the optimal binary heterojunction photocatalyst has good reusability and universal applicability. The results of cyclic voltammetry tests clarify that the optimal photocatalyst can provide more surface reactive sites. The results of radical trapping experiments and electron spin resonance indicate that holes (h+) and superoxide radicals are the main active radicals in the degradation process of 2,4-dinitrophenylhydrazine. Photoelectrochemical and photoluminescence confirm that 3 wt% Bi2Sn2O7/Bi5O7I composites exhibit the highest separation rate of photogenerated carriers. Finally, based on the results of experimental studies and theoretical calculations, the S-scheme charge transfer path on Bi2Sn2O7/Bi5O7I composite is determined. This work provides a new perspective on how to design high-performance S-scheme bismuth oxyhalide-based heterojunction photocatalysts for solar energy conversion.

Carrier confinement activated explicit solvent dynamic of CdS/BiVO4/H2O and optimized photocatalytic hydrogen evolution performances

Herein, using an electrophoretic deposition strategy, a S-scheme CdS (cubic)/BiVO4 (monoclinic) heterostructured photocatalyst is fabricated. The as-synthesized photocatalysts exhibit high carrier separation efficiency, prominent hydrogen evolution ability and high stability. The results of the detailed density functional theory (DFT) prove that the photogenerated electrons and holes are located in BiVO4 and CdS components, respectively. Besides, an explicit solvent model based on the electron-enriched region in CdS/BiVO4 heterojunction is designed deliberately to investigate the solid/liquid interface issues. Intriguing findings demonstrate that the surface hydrogen diffusing rate in CdS/BiVO4/H2O is faster than that of BiVO4/H2O and is highly associated with the electron-enrich effect, which has a greater capacity to promote water decomposition, the possibility of proton collision and photocatalytic hydrogen evolution. Notably, the H p orbital can participate in the electron-enrich effect during solvation, thus reforming the orbital energy level and activating the HER of the BiVO4 component in the CdS/BiVO4 system.

Nickel selenide/g-C3N4 heterojunction photocatalyst promotes CC coupling for photocatalytic CO2 reduction to ethane

Photocatalytic CO2 reduction to generate high value-added and renewable chemicals is of great potential in facilitating the realization of closed-loop and carbon-neutral hydrogen economy. Stabilizing and accelerating the formation of COCO* intermediate is crucial to achieve high-selectivity ethane production. Herein, a novel 3D/2D NiSe2/g-C3N4 heterostructure that mesoscale hedgehog nickel selenide (NiSe2) grown on the ultrathin g-C3N4 nanosheets were synthesized via a successively high temperature calcination process and in-situ thermal injection method for the first time. The optimum 2.7 % NiSe2/g-C3N4 heterostructure achieved moderate C2H6 generation rate of 46.1 μmol·g-1·h-1 and selectivity of 97.5 % without any additional photosensitizers and sacrificial agents under light illumination. Based on the results of the theoretical calculations and experiments, the improvement of photocatalytic CO2 to C2H6 production and selectivity should be ascribed to the increased visible light absorption ability, unique 3D/2D heterostructures with promoted adsorption of CO2 molecules on the Ni active sites, the type II heterojunction with improved charge transfer dynamics and lowered interfacial transfer resistance, as well as the formation of COCO* key intermediate. This work provides an inspiration to construct efficient photocatalysts for the direct transformation of CO2 to multicarbon products (C2+).

Layer-by-layer designer nanoarchitectonics for physical and chemical communications in functional materials

Nanoarchitectonics, as a post-nanotechnology concept, constructs functional materials and structures using nanounits of atoms, molecules, and nanomaterials as materials. With the concept of nanoarchitectonics, asymmetric structures, and hierarchical organization, rather than mere assembly and organization of structures, can be produced, where rational physical and chemical communications will lead to the development of more advanced functional materials. Layer-by-layer assembly can be a powerful tool for this purpose, as exemplified in this feature paper. This feature article explores the possibility of constructing advanced functional systems based on recent examples of layer-by-layer assembly. We will illustrate both the development of more basic methods and more advanced nanoarchitectonics systems aiming towards practical applications. Specifically, the following sections will provide examples of (i) advancement in basics and methods, (ii) physico-chemical aspects and applications, (iii) bio-chemical aspects and applications, and (iv) bio-medical applications. It can be concluded that materials nanoarchitectonics based on layer-by-layer assembly is a useful method for assembling asymmetric structures and hierarchical organization, and is a powerful technique for developing functions through physical and chemical communication.

Confined Space Nanoarchitectonics for Dynamic Functions and Molecular Machines

Nanotechnology has advanced the techniques for elucidating phenomena at the atomic, molecular, and nano-level. As a post nanotechnology concept, nanoarchitectonics has emerged to create functional materials from unit structures. Consider the material function when nanoarchitectonics enables the design of materials whose internal structure is controlled at the nanometer level. Material function is determined by two elements. These are the functional unit that forms the core of the function and the environment (matrix) that surrounds it. This review paper discusses the nanoarchitectonics of confined space, which is a field for controlling functional materials and molecular machines. The first few sections introduce some of the various dynamic functions in confined spaces, considering molecular space, materials space, and biospace. In the latter two sections, examples of research on the behavior of molecular machines, such as molecular motors, in confined spaces are discussed. In particular, surface space and internal nanospace are taken up as typical examples of confined space. What these examples show is that not only the central functional unit, but also the surrounding spatial configuration is necessary for higher functional expression. Nanoarchitectonics will play important roles in the architecture of such a total system.

2D Materials Nanoarchitectonics for 3D Structures/Functions

It has become clear that superior material functions are derived from precisely controlled nanostructures. This has been greatly accelerated by the development of nanotechnology. The next step is to assemble materials with knowledge of their nano-level structures. This task is assigned to the post-nanotechnology concept of nanoarchitectonics. However, nanoarchitectonics, which creates intricate three-dimensional functional structures, is not always easy. Two-dimensional nanoarchitectonics based on reactions and arrangements at the surface may be an easier target to tackle. A better methodology would be to define a two-dimensional structure and then develop it into a three-dimensional structure and function. According to these backgrounds, this review paper is organized as follows. The introduction is followed by a summary of the three issues; (i) 2D to 3D dynamic structure control: liquid crystal commanded by the surface, (ii) 2D to 3D rational construction: a metal-organic framework (MOF) and a covalent organic framework (COF); (iii) 2D to 3D functional amplification: cells regulated by the surface. In addition, this review summarizes the important aspects of the ultimate three-dimensional nanoarchitectonics as a perspective. The goal of this paper is to establish an integrated concept of functional material creation by reconsidering various reported cases from the viewpoint of nanoarchitectonics, where nanoarchitectonics can be regarded as a method for everything in materials science.

Synthesis of novel nanocomposite of g-C3N4 coated ZnO-MoS2 for energy storage and photocatalytic applications

Fabrication of heterostructures for energy storage and environmental remedial applications is an interesting subject of research that has been undertaken in this present investigation. The incorporation of g-C3N4 into ZnO:MoS2 heterojunction nanocomposite was accomplished by wet-chemical route and characterized by various techniques to ascertain its structure, morphology, and study its potential electro-optical characteristics. The g-C3N4@ZnO:MoS2 sample was investigated by x-ray diffraction (XRD) which reveals the co-existence of the ZnO, MoS2 and C3N4 phases linked to characteristic crystallographic planes in the spectrum, validating the formation of ternary nanocomposite. The XRD patterns of the pristine samples were also considered as reference to understand the structural evolution and phase transformations. Field emission scanning electron microscopy (FESEM) study states the formation of heterogeneous nanostructures having nanoparticles embedded on 2-D nanosheets like structures. Studies using energy dispersive spectroscopy (EDS) and elemental mapping show that all the elements that are linked to the above hybrid nanocomposite are present. Transmission electron microscopy (TEM) provided clear insights on the microstructure as we can identify the distribution of ZnO and MoS2 nanostructures on layered g-C3N4 nanosheets. The chemical composition and oxidation states of elements were elucidated by X-ray photoelectron spectroscopy (XPS) study, which added another layer of confirmation on the structural evolution of the ternary nanocomposite. Fourier transformed infrared (FTIR) study revealed the layered structure of sp2 hybridized bonding features of C and N in g-C3N4, besides Zn-O and Mo-S stretching vibrations. The nanocomposite demonstrated improved photodegradation efficacy and decomposed alizarin red and methylene blue dyes significantly with better stability and reusability. MoS2 as a co-catalyst acts as an electron acceptor/accelerator in the Z-scheme composite photocatalysis leading to improved photocatalytic efficiency. The resulting heterostructured material delivered a higher specific capacitance of 10.85 F/g with good capacitance retention. Electrochemical study revealed the energy storage capability of the hybrid system.

Materials Nanoarchitectonics at Dynamic Interfaces: Structure Formation and Functional Manipulation

The next step in nanotechnology is to establish a methodology to assemble new functional materials based on the knowledge of nanotechnology. This task is undertaken by nanoarchitectonics. In nanoarchitectonics, we architect functional material systems from nanounits such as atoms, molecules, and nanomaterials. In terms of the hierarchy of the structure and the harmonization of the function, the material created by nanoarchitectonics has similar characteristics to the organization of the functional structure in biosystems. Looking at actual biofunctional systems, dynamic properties and interfacial environments are key. In other words, nanoarchitectonics at dynamic interfaces is important for the production of bio-like highly functional materials systems. In this review paper, nanoarchitectonics at dynamic interfaces will be discussed, looking at recent typical examples. In particular, the basic topics of "molecular manipulation, arrangement, and assembly" and "material production" will be discussed in the first two sections. Then, in the following section, "fullerene assembly: from zero-dimensional unit to advanced materials", we will discuss how various functional structures can be created from the very basic nanounit, the fullerene. The above examples demonstrate the versatile possibilities of architectonics at dynamic interfaces. In the last section, these tendencies will be summarized, and future directions will be discussed.

Electron confinement promoted the electric double layer effect of BiOI/β-Bi2O3 in photocatalytic water splitting

In the realm of photocatalysis, understanding the interface issues (solid/solid and solid/liquid) inherent in heterojunction at the atomic level is the ultimate for engineering an efficient photocatalyst. Herein, an electrophoretic deposition technique is adopted to synthesize BiOI/β-Bi2O3 heterojunction, exhibiting superior photocatalytic activity and stability in H2 evolution (91.5 μmol g-1 h-1) and H2O2 production (11.3 mg L-1 h-1). Combined with the experimental and computational results, a lower free energy of hydrogen evolution reaction (252.4 meV) has been observed contrast to BiOI and β-Bi2O3 samples. A carrier transfer process of like S-scheme heterojunction is proposed based on density of states (DOS) and carrier distribution calculations. The theoretical calculations illustrate the transition dipole moment, migration and accumulation of carrier in BiOI/β-Bi2O3 heterojunction. Subsequent ab initio molecular dynamics (AIMD) results of solid/liquid interface systems (BiOI/β-Bi2O3/H2O and β-Bi2O3/H2O) unravel the interface H2O (solvent) behaviors. The local aggregation of photo-generated electrons in BiOI/β-Bi2O3/H2O leads to a large potential drop, high proton migration rate and the steady electric double layer (EDL) structure compared to the β-Bi2O3/H2O, which facilitates the occurrence of photocatalytic reactions in solution. In addition to offering new insights into the hydrogen evolution and proton transfer in the EDL model and the association between the heterojunction effect and EDL structure, this work also introduces a novel design strategy for Bi-based heterojunctions.

Tunable Band Engineering Management on Perovskite MAPbBr3 /COFs Nano-Heterostructures for Efficient S-S Coupling Reactions

Efficient artificial photosynthesis of disulfide bonds holds promises to facilitate reverse decoding of genetic codes and deciphering the secrets of protein multilevel folding, as well as the development of life science and advanced functional materials. However, the incumbent synthesis strategies encounter separation challenges arising from leaving groups in the ─S─S─ coupling reaction. In this study, according to the reaction mechanism of free-radical-triggered ─S─S─ coupling, light-driven heterojunction functional photocatalysts are tailored and constructed, enabling them to efficiently generate free radicals and trigger the coupling reaction. Specifically, perovskites and covalent organic frameworks (COFs) are screened out as target materials due to their superior light-harvesting and photoelectronic properties, as well as flexible and tunable band structure. The in situ assembled Z-scheme heterojunction MAPB-M-COF (MAPbBr3 = MAPB, MA+ = CH3 NH2 + ) demonstrates a perfect trade-off between quantum efficiency and redox chemical potential via band engineering management. The MAPB-M-COF achieves a 100% ─S─S─ coupling yield with a record photoquantum efficiency of 11.50% and outstanding cycling stability, rivaling all the incumbent similar reaction systems. It highlights the effectiveness and superiority of application-oriented band engineering management in designing efficient multifunctional photocatalysts. This study demonstrates a concept-to-proof research methodology for the development of various integrated heterojunction semiconductors for light-driven chemical reaction and energy conversion.

Photo/electrocatalytic hydrogen evolution using Type-II Cu2O/g-C3N4 Heterostructure: Density functional theory addresses the improved charge transport efficiency

One of the most efficient ways for the photogenerated charge carriers is by the development of heterojunction between p-type and n-type semiconductors, which creates an interfacial charge transfer between two semiconductors. By enhancing the bifunctional characteristics for hydrogen generation via photocatalytic and electrocatalytic water splitting reaction, we report the type-II Cu2O/g-C3N4 heterostructure in this article. Due to significantly increased catalytically active sites for the hydrogen evolution reaction (HER) reaction during electrocatalysis and decreased charge transfer resistance, the as-prepared heterostructure exhibits a lower overpotential of 47 and 72 mVdec-1 for the HER and oxygen evolution reactions (OER), respectively, when compared to alone g-C3N4. In addition, Cu2O/g-C3N4 heterostructures have a higher photocatalytic hydrogen evolution of 3492 µmol gcat-1 in the presence of Triethanolamine as a sacrificial agent, which is nearly 2-fold times greater than g-C3N4 (1818 µmol gcat-1) after 5 h of continuous light-irradiation. Moreover, produced heterostructure exhibits 81% of Faradaic efficiency and 18% of apparent quantum yield. This work successfully explains how the rise in water splitting is induced by the transfer of photogenerated electrons in a cascade way from p-type Cu2O to the n-type g-C3N4 using density functional theory (DFT) calculations.

In situ synthesis of g-C3N4/Ti3C2Tx nano-heterostructures for enhanced photocatalytic H2 generation via water splitting

Herein, we demonstrated the in situ synthesis of g-C3N4/Ti3C2Tx nano-heterostructures for hydrogen generation under UV visible light irradiation. The formation of the g-C3N4/Ti3C2Tx nano-heterostructures was confirmed via powder X-ray diffraction and supported by XPS. The FE-SEM images indicated the formation of layered structures of MXene and g-C3N4. HR-TEM images and SAED patterns confirmed the presence of g-C3N4 together with Ti3C2Tx nanosheets, i.e., the formation of nano-heterostructures of g-C3N4/Ti3C2Tx. The absorption spectra clearly showed the distinct band gaps of g-C3N4 and Ti3C2Tx in the nano-heterostructure. The increase in PL intensity and broadening of the peak with an increase in g-C3N4 indicated the suppression of electron-hole recombination. Furthermore, the nano-heterostructure was used as a photocatalyst for H2 generation from water and methylene blue dye degradation. The highest H2 evolution (1912.25 μmol/0.1 g) with good apparent quantum yield (3.1%) and an efficient degradation of MB were obtained for gCT-0.75, which was much higher compared to that of the pristine materials. The gCT-0.75 nano-heterostructure possessed a high surface area and abundant vacancy defects, facilitating the separation of charge carriers, which was ultimately responsible for this high photocatalytic activity. Additionally, TRPL clearly showed a higher decay time, which supports the enhancement in the photocatalytic activity of the gCT-0.75 nano-heterostructure. The nano-heterostructure with the optimum concentration of g-C3N4 formed a hetero-junction with the linked catalytic system, which facilitated efficient charge carrier separation also responsible for the enhanced photocatalytic activity.

Clay-based 1D-2D halloysite&g-C3N4 nanostructured meat floss for photocatalytic hydrogen evolution

Graphitic carbon nitride (g-C3N4) has drawn extensive attention with some features including visible-light response as non-metallic semiconductor, low cost in raw material and green pollution-free for environment, but suffers from some issues such as fast charge carriers' recombination, easy aggregation, etc. In this work, the 1D-2D HNTs&g-C3N4-X binary materials similar to meat floss pattern in a series of halloysite loading amounts are designed via a facile electrostatic self-assembly strategy with debris g-C3N4 after cell pulverizing treatment and HNTs that outwardly modified by cetyltrimethylammonium bromide (CTAB) as the building blocks. The halloysite-mediated satellite-core material displays a photocatalytic of H2 evolution performance with the highest evolution rate of 137.0 μmol g-1 h-1 in visible light condition with no co-catalysts, and is ∼3.4 times that of bulk g-C3N4, mainly benefiting from the reduced nanometer size of debris g-C3N4 and enhanced interface dispersion ability by HNTs, resulting in ameliorative separation efficiency of photogenerated charge carriers. This research conclusively provides the new perspective towards the performance enhancement of water splitting of g-C3N4 in raw clay mineral modification mode and broadens the applications of mineral-based composite in the renewable energy utilization field.

Hydrophobic Chain-Induced Conversion of Three-Dimensional Perovskite Nanocrystals to Gold Nanocluster-Grafted Two-Dimensional Platelets for Photoinduced Electron Transfer Substrate Formulation

Considering the augmentation of new generation energy harvesting devices and applications of electron-hole separation therein, conversion of 3D cubic CsPbBr3 perovskite nanocrystals into 2D-platelets through ligand-ligand hydrophobic interactions has been conceived here. Cationic surfactants with various chain length coated the gold nanoclusters (AuNCs) that interact with oleic acid (OA) and oleylamine (OAm) coated 3D CsPbBr3 nanocrystals to disintegrate the crystallinity of the perovskites and reformation of AuNC-grafted 2D-platelets of unusually large size. The planar perovskite-derivatives act as an exciton donor to the embedded AuNCs through photoinduced electron transfer (PET). This process is controlled by the optimum surfactant chain length. Transient absorption spectroscopy shows that the fastest radical growth time (4 ps) was with the 14-carbon containing tail of the surfactant, followed by the 16-carbon (45 ps) and the 12-carbon (290 ps) ones. PET is administered by the energy gaps of the participating candidates that control the transition dynamics. Our findings can be a potential tool to develop metal nanocluster-based hybrid 2D perovskite-derived platelets for optoelectronic applications.

g-C3N4/Chlorocobaloxime Nanocomposites as Multifunctional Electrocatalysts for Water Splitting and Energy Storage

Due to environmental contamination and the depletion of energy supplies, it is very important to develop low-cost, high-performance, multifunctional electrocatalysts for energy conversion and storage systems. Herein, we report the development of cost-effective modified electrodes containing g-C3N4/chlorocobaloxime composites (C1-C4) and their electrocatalytic behavior toward the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), followed by their energy-storage applications. A series of chlorocobaloximes {ClCo(dpgH)2B} with diphenylglyoxime (dpgH) and neutral bases (B) containing a carboxylic acid moiety (isonicotinic acid, pyridine-3,5-dicarboxylic acid, indole-2-carboxylic acid, and p-aminobenzoic acid) have been synthesized and characterized by spectroscopic techniques. The nanocomposites of g-C3N4/chlorocobaloximes are prepared and characterized by Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), X-ray photoelectron spectroscopy (XPS), particle size distribution analysis (PSA), Brunauer-Emmett-Teller (BET), and energy dispersive X-ray analysis (EDAX) techniques. The composite coatings exhibit enhanced HER performance at lower overpotential and with a lower Tafel slope. When the water-splitting reactions are studied using 0.5 M H2SO4 and 0.5 M KOH as electrolytic solutions, the composite g-C3N4/C2 containing pyridine-3,5-dicarboxylic acid as a neutral base shows excellent HER activity with a lower overpotential of 173 mV at -10 mA cm-2 and OER activity with a lower overpotential of 303 mV. The HER reaction takes place through the Volmer-Heyrovský mechanism, where the desorption step is the rate-determining step. Among the synthesized nanocomposites, the nanocomposite g-C3N4/C2 shows higher efficiency toward both HER and OER reactions, with a lower Tafel slope of 55 mV dec-1 for HER and 114 mV dec-1 for OER than the other nanocomposites. The overall water-splitting studies of the composite g-C3N4/C2 in 0.5 M KOH indicate that the evolution of hydrogen and oxygen occurs constantly up to 120 h. The supercapacitance applications studied using cyclic voltammetry and charge-discharge studies indicate that the nanocomposite g-C3N4/C1 shows a good specific capacitance of 236 F g-1 at 0.5 A g-1 compared to others. The increased electrochemical performance of the synthesized nanocomposites is due to the incorporation of electron-withdrawing carboxylic-acid-functionalized neutral bases present in cobaloximes, which increases electron mobility. The incorporation of a cobaloxime complex into a g-C3N4 nanosheet enhances the electrocatalytic behavior of the nanosheet, and its performance can further be fine-tuned by systematic variation in the structure of cobaloxime by changing the halide ion, dioxime, the neutral base ligand, or the substituent.

A Cu medium designed Z-scheme ZnO-Cu-CdS heterojunction photocatalyst for stable and excellent H2 evolution, methylene blue degradation, and CO2 reduction

Solar photocatalysis has emerged as a pollution-free and inexhaustible technique that has been extensively researched in the domains of environmental remediation and energy production. Herein, we have integrated ZnO and CdS nanoparticles through Cu as a solid-state electron mediator to design a ZnO-Cu-CdS Z-scheme heterosystem via a sol-gel route and further tested this as a photocatalyst for dye degradation, H₂ evolution, and CO₂ reduction. Within 60 min of visible light exposure, about 97% of methylene blue (MB) is degraded with a degradation rate constant of 0.042 min^-1 for the ZnO_0.45Cu_0.1CdS_0.45 catalyst. The MB degradation with this catalyst is 84, 21, 4.8, and 2 times as high as those of ZnO, CdS, ZnO_0.5CdS_0.5, and Cu_0.1ZnO_0.9 catalysts. The ZnO-Cu-CdS catalyst manifests an H₂ evolution efficiency of 5579 μmol h^-1 g^-1, which is 169, 41, 3.9, and 3.5 times as high as those of ZnO, CdS, ZnO_0.5CdS_0.5, and Cu_0.1ZnO_0.9 catalysts. Using H₂ as a reducing agent, the CO production rate over the ZnO_0.45Cu_0.1CdS_0.45 catalyst reaches 770 μmol h^-1 g^-1, which is 3 and 1.8 times higher than those of ZnO_0.5CdS_0.5 and Cu_0.1ZnO_0.9 catalysts. Besides, the optimal CH₄ production rate over ZnO_0.45Cu_0.1CdS_0.45 reaches 890 μmol h^-1 g^-1. The improved photocatalytic response of the ZnO-Cu-CdS catalyst is assigned to the delayed recombination of photoexcited charge carriers through a Z-scheme charge transport mode, maintaining the photocarriers with strong redox potentials and the dual role of Cu to serve as a conductive bridge to accelerate the charge transfer rate and enhance the light absorption due to its SPR phenomenon. This research offers a promising strategy for developing binary/ternary Z-scheme heterojunction photocatalytic systems for different photocatalytic applications.