Mandibular defect repair by TGF-β and IGF-1 released from a biodegradable osteoconductive hydrogel

3D printing for bone regeneration: challenges and opportunities for achieving predictability

3D printing offers attractive opportunities for large-volume bone regeneration in the oro-dental and craniofacial regions. This is enabled by the development of CAD-CAM technologies that support the design and manufacturing of anatomically accurate meshes and scaffolds. This review describes the main 3D-printing technologies utilized for the fabrication of these patient-matched devices, and reports on their pre-clinical and clinical performance including the occurrence of complications for vertical bone augmentation and craniofacial applications. Furthermore, the regulatory pathway for approval of these devices is discussed, highlighting the main hurdles and obstacles. Finally, the review elaborates on a variety of strategies for increasing bone regeneration capacity and explores the future of 4D bioprinting and biodegradable metal 3D printing.

Local Concentrations of TGF-β1 and IGF-1 Appear Determinant in Regulating Bone Regeneration in Human Postextraction Tooth Sockets

Healing after tooth extraction involves a series of reparative processes affecting both alveolar bone and soft tissues. The aim of the present study was to investigate whether activation of molecular signals during the healing process confers a regenerative advantage to the extraction socket soft tissue (ESsT) at 8 weeks of healing. Compared to subepithelial connective tissue graft (CTG), qRT-PCR analyses revealed a dramatic enrichment of the ESsT in osteogenic differentiation markers. However, ESsT and CTG shared characteristics of nonspecialized soft connective tissue by expressing comparable levels of genes encoding abundant extracellular matrix (ECM) proteins. Genes encoding the transforming growth factor-β1 (TGF-β1) and its receptors were strongly enriched in the CTG, whereas the transcript for the insulin-like growth factor-1 (IGF-1) showed significantly high and comparable expression in both tissues. Mechanical stimulation, by the means of cyclic strain or matrix stiffness applied to primary ESsT cells (ESsT-C) and CTG fibroblasts (CTG-F) extracted from the tissue samples, revealed that stress-induced TGF-β1 not exceeding 2.3 ng/mL, as measured by ELISA, in combination with IGF-1 up to 2.5 ng/mL was able to induce the osteogenic potential of ESsT-Cs. However, stiff matrices (50 kPa), upregulating the TGF-β1 expression up to 6.6 ng/mL, caused downregulation of osteogenic gene expression in the ESsT-Cs. In CTG-Fs, endogenous or stress-induced TGF-β1 ≥ 4.6 ng/mL was likely responsible for the complete lack of osteogenesis. Treatment of ESsT-Cs with TGF-β1 and IGF-1 proved that, at specific concentrations, the two growth factors exhibited either an inductive-synergistic or a suppressive activity, thus determining the osteogenic and mineralization potential of ESsT-Cs. Taken together, our data strongly warrant the clinical exploration of ESsT as a graft in augmentative procedures during dental implant placement surgeries.

Applications of Hydrogels in Drug Delivery for Oral and Maxillofacial Diseases

Oral and maxillofacial diseases have an important impact on local function, facial appearance, and general health. As a multifunctional platform, hydrogels are widely used in the biomedical field due to their excellent physicochemical properties. In recent years, a large number of studies have been conducted to adapt hydrogels to the complex oral and maxillofacial environment by modulating their pore size, swelling, degradability, stimulus-response properties, etc. Meanwhile, many studies have attempted to use hydrogels as drug delivery carriers to load drugs, cytokines, and stem cells for antibacterial, anticancer, and tissue regeneration applications in oral and maxillofacial regions. This paper reviews the application and research progress of hydrogel-based drug delivery systems in the treatment of oral and maxillofacial diseases such as caries, endodontic diseases, periodontal diseases, maxillofacial bone diseases, mucosal diseases, oral cancer, etc. The characteristics and applications of hydrogels and drug-delivery systems employed for the treatment of different diseases are discussed in order to provide a reference for further research on hydrogel drug-delivery systems in the future.

The Effect of Angiogenesis-Based Scaffold of MesoporousBioactive Glass Nanofiber on Osteogenesis

There is still an urgent need for more efficient biological scaffolds to promote the healing of bone defects. Vessels can accelerate bone growth and regeneration by transporting nutrients, which is an excellent method to jointly increase osteogenesis and angiogenesis in bone regeneration. Therefore, we aimed to prepare a composite scaffold that could promote osteogenesis with angiogenesis to enhance bone defect repair. Here, we report that scaffolds were prepared by coaxial electrospinning with mesoporous bioactive glass modified with amino (MBG-NH2) adsorbing insulin-like growth factor-1 (IGF-1) as the core and silk fibroin (SF) adsorbing vascular endothelial growth factor (VEGF) as the shell. These scaffolds were named MBG-NH2/IGF@SF/VEGF and might be used as repair materials to promote bone defect repair. Interestingly, we found that the MBG-NH2/IGF@SF/VEGF scaffolds had nano-scale morphology and high porosity, as well as enough mechanical strength to support the tissue. Moreover, MBG-NH2 could sustain the release of IGF-1 to achieve long-term repair. Additionally, the MBG-NH2/IGF@SF/VEGF scaffolds could significantly promote the mRNA expression levels of osteogenic marker genes and the protein expression levels of Bmp2 and Runx2 in bone marrow mesenchymal stem cells (BMSCs). Meanwhile, the MBG-NH2/IGF@SF/VEGF scaffolds promoted osteogenesis by simulating Runx2 transcription activity through the phosphorylated Erk1/2-activated pathway. Intriguingly, the MBG-NH2/IGF@SF/VEGF scaffolds could also significantly promote the mRNA expression level of angiogenesis marker genes and the protein expression level of CD31. Furthermore, RNA sequencing verified that the MBG-NH2/IGF@SF/VEGF scaffolds had excellent performance in promoting bone defect repair and angiogenesis. Consistent with these observations, we found that the MBG-NH2/IGF@SF/VEGF scaffolds demonstrated a good repair effect on a critical skull defect in mice in vivo, which not only promoted the formation of blood vessels in the haversian canal but also accelerated the bone repair process. We concluded that these MBG-NH2/IGF@SF/VEGF scaffolds could promote bone defect repair under accelerating angiogenesis. Our finding provides a new potential biomaterial for bone tissue engineering.

Tissue Engineered Neurovascularization Strategies for Craniofacial Tissue Regeneration

Craniofacial tissue injuries, diseases, and defects, including those within bone, dental, and periodontal tissues and salivary glands, impact an estimated 1 billion patients globally. Craniofacial tissue dysfunction significantly reduces quality of life, and successful repair of damaged tissues remains a significant challenge. Blood vessels and nerves are colocalized within craniofacial tissues and act synergistically during tissue regeneration. Therefore, the success of craniofacial regenerative approaches is predicated on successful recruitment, regeneration, or integration of both vascularization and innervation. Tissue engineering strategies have been widely used to encourage vascularization and, more recently, to improve innervation through host tissue recruitment or prevascularization/innervation of engineered tissues. However, current scaffold designs and cell or growth factor delivery approaches often fail to synergistically coordinate both vascularization and innervation to orchestrate successful tissue regeneration. Additionally, tissue engineering approaches are typically investigated separately for vascularization and innervation. Since both tissues act in concert to improve craniofacial tissue regeneration outcomes, a revised approach for development of engineered materials is required. This review aims to provide an overview of neurovascularization in craniofacial tissues and strategies to target either process thus far. Finally, key design principles are described for engineering approaches that will support both vascularization and innervation for successful craniofacial tissue regeneration.

The Role of GH/IGF Axis in Dento-Alveolar Complex from Development to Aging and Therapeutics: A Narrative Review

The GH/IGF axis is a major regulator of bone formation and resorption and is essential to the achievement of normal skeleton growth and homeostasis. Beyond its key role in bone physiology, the GH/IGF axis has also major pleiotropic endocrine and autocrine/paracrine effects on mineralized tissues throughout life. This article aims to review the literature on GH, IGFs, IGF binding proteins, and their respective receptors in dental tissues, both epithelium (enamel) and mesenchyme (dentin, pulp, and tooth-supporting periodontium). The present review re-examines and refines the expression of the elements of the GH/IGF axis in oral tissues and their in vivo and in vitro mechanisms of action in different mineralizing cell types of the dento-alveolar complex including ameloblasts, odontoblasts, pulp cells, cementoblasts, periodontal ligament cells, and jaw osteoblasts focusing on cell-specific activities. Together, these data emphasize the determinant role of the GH/IGF axis in physiological and pathological development, morphometry, and aging of the teeth, the periodontium, and oral bones in humans, rodents, and other vertebrates. These advancements in oral biology have elicited an enormous interest among investigators to translate the fundamental discoveries on the GH/IGF axis into innovative strategies for targeted oral tissue therapies with local treatments, associated or not with materials, for orthodontics and the repair and regeneration of the dento-alveolar complex and oral bones.

Systemic and Local Biocompatibility Assessment of Graphene Composite Dental Materials in Experimental Mandibular Bone Defect

The main objective of this research is to demonstrate the biocompatibility of two experimental graphene dental materials by in vitro and in vivo tests for applications in dentistry. The novel graphene dental materials, including one restorative composite and one dental cement, were subjected to cytotoxicity and implantation tests by using a rat model of a non-critical mandibular defect. In vitro cytotoxicity induced by materials on human dental follicle stem cells (restorative composite) and dysplastic oral keratinocytes (dental cement) was investigated at 37 °C for 24 h. After in vivo implantation, at 7 weeks, bone samples were harvested and subjected to histological investigations. The plasma biochemistry, oxidative stress, and sub-chronic organ toxicity analysis were also performed. The resulting cytotoxicity tests confirm that the materials had no toxic effects against dental cells after 24 h. Following graphene dental materials implantation, the animals did not present any symptoms of acute toxicity or local inflammation. No alterations were detected in relative organ weights and in correlation with hepatic and renal histological findings. The materials' lack of systemic organ toxicity was confirmed. The outcomes of our study provided further evidence on the graphene dental materials' ability for bone regeneration and biocompatibility.

Systematic scoping review of mandibular bone tissue engineering

Tissue engineering is a promising alternative that may facilitate bony regeneration in small defects in compromised host tissue as well as large mandibular defects. This scoping systematic review was therefore designed to assess in vivo research on its use in the reconstruction of mandibular defects in animal models. A total of 4524 articles were initially retrieved using the search algorithm. After screening of the titles and abstracts, 269 full texts were retrieved, and a total of 72 studies included. Just two of the included studies employed osteonecrosis as the model of mandibular injury. All the rest involved the creation of a critical defect. Calcium phosphates, especially tricalcium phosphate and hydroxyapatite, were the scaffolds most widely used. All the studies that used a scaffold reported increased formation of bone when compared with negative controls. When combined with scaffolds, mesenchymal stem cells (MSC) increased the formation of new bone and improved healing. Various growth factors have been studied for their potential use in the regeneration of the maxillofacial complex. Bone morphogenic proteins (BMP) were the most popular, and all subtypes promoted significant formation of bone compared with controls. Whilst the studies published to date suggest a promising future, our review has shown that several shortfalls must be addressed before the findings can be translated into clinical practice. A greater understanding of the underlying cellular and molecular mechanisms is required to identify the optimal combination of components that are needed for predictable and feasible reconstruction or regeneration of mandibular bone. In particular, a greater understanding of the biological aspects of the regenerative triad is needed before we can to work towards widespread translation into clinical practice.

The effects of local and intraperitoneal zinc treatments on maxillofacial fracture healing in rabbits

OBJECTIVE

This study aimed to determine whether administration of topical and intraperitoneal zinc for maxillofacial fractures has any impact on the bone healing process.

MATERIAL AND METHOD

Thirty-two New Zealand rabbits were randomly assigned to four groups of eight each. The first group was the control group; fracture lines were fixed using titanium microplates and no medication was administered. The second group received fixations using zinc-coated titanium microplates. A single dose of 3 mg/kg zinc was administered intraperitoneally to the third group following fixations with titanium microplates. A single dose of 3 mg/kg zinc was administered intraperitoneally to the fourth group following fixations with zinc-coated titanium microplates. Zinc coating on to the titanium microplates was achieved using the physical vapor deposition technique. A fracture line was created in the nasal bones of all subjects and fixed with five-hole flat microplates and three 5-mm micro screws. All work groups were sacrificed at the end of the sixth week.

RESULTS

Histological examination showed that the number of osteoblasts were significantly higher in zinc-coated group (Group 2) than zinc uncoated, control group (Group 1), (415.6 ± 46.7 vs 366.3 ± 11.8) (p < 0.001). It was observed that intraperitoneal zinc treatment alone (Group 3) did not significantly increase in the osteoblast count compared to zinc un-coated group (Group 1), (390.6 ± 83.2 vs 366.3 ± 11.8), (p = 0.341). The immunoreactivity scores for IGF-1 were significantly higher in the zinc-coated group compared to control group (Group 2 vs 1), (9.3 ± 2.8 vs 3.7 ± 1.9) (p < 0.05). It was observed that intraperitoneal zinc treatment did not cause a significant difference in the aspect of IGF-1 for zinc-coated groups (Group 2 vs 4) (9.3 ± 2.8 vs 9.6 ± 2.2) (p = 0.791). The difference in the immunoreactivity score among whole groups for TGF-β was not statistically significant (Group 1 vs 2, 3.2 ± 1.7 vs 4.4 ± 2.3, p = 0.256; Group 1 vs 3, 3.2 ± 1.7 vs 3.8 ± 2.8, p = 0.524; Group 1 vs 4, 3.2 ± 1.7 vs 2.8 ± 1.3, p = 0.717; Group 2 vs 3, 4.4 ± 2.3, vs 3.8 ± 2.8, p = 0.610; Group 2 vs 4, 4.4 ± 2.3, vs 2.8 ± 1.3, p = 0.124; Group 3 vs 4, 3.8 ± 2.8, vs 2.8 ± 1.3, p = 0.311).

CONCLUSION

The local use of titanium microplates coated with zinc by PVD technique was found effective for fracture healing. Zinc coating of titanium microplates used in fracture treatment can accelerate fracture healing. It may be concluded that clinical studies should be performed now in order to explore if comparable results can be achieved in humans.

3D-printing porosity: A new approach to creating elevated porosity materials and structures

We introduce a new process that enables the ability to 3D-print high porosity materials and structures by combining the newly introduced 3D-Painting process with traditional salt-leaching. The synthesis and resulting properties of three 3D-printable inks comprised of varying volume ratios (25:75, 50:50, 70:30) of CuSO₄ salt and polylactide-co-glycolide (PLGA), as well as their as-printed and salt-leached counterparts, are discussed. The resulting materials are comprised entirely of PLGA (F-PLGA), but exhibit porosities proportional to the original CuSO₄ content. The three distinct F-PLGA materials exhibit average porosities of 66.6-94.4%, elastic moduli of 112.6-2.7 MPa, and absorbency of 195.7-742.2%. Studies with adult human mesenchymal stem cells (hMSCs) demonstrated that elevated porosity substantially promotes cell adhesion, viability, and proliferation. F-PLGA can also act as carriers for weak, naturally or synthetically-derived hydrogels. Finally, we show that this process can be extended to other materials including graphene, metals, and ceramics.

STATEMENT OF SIGNIFICANCE

Porosity plays an essential role in the performance and function of biomaterials, tissue engineering, and clinical medicine. For the same material chemistry, the level of porosity can dictate if it is cell, tissue, or organ friendly; with low porosity materials being far less favorable than high porosity materials. Despite its importance, it has been difficult to create three-dimensionally printed structures that are comprised of materials that have extremely high levels of internal porosity yet are surgically friendly (able to handle and utilize during surgical operations). In this work, we extend a new materials-centric approach to 3D-printing, 3D-Painting, to 3D-printing structures made almost entirely out of water-soluble salt. The structures are then washed in a specific way that not only extracts the salt but causes the structures to increase in size. With the salt removed, the resulting medical polymer structures are almost entirely porous and contain very little solid material, but the maintain their 3D-printed form and are highly compatible with adult human stem cells, are mechanically robust enough to use in surgical manipulations, and can be filled with and act as carriers for biologically active liquids and gels. We can also extend this process to three-dimensionally printing other porous materials, such as graphene, metals, and even ceramics.

Effects of rhBMP-2 Loaded Titanium Reinforced Collagen Membranes on Horizontal Bone Augmentation in Dogs

The aim of this study was to evaluate the efficacy of growth factor loaded collagen membranes on new bone formation during horizontal bone augmentation. Mandibular defects (4 × 4 × 4 mm) were surgically prepared in six male beagle dogs, which were then protected with one of three types of membranes: (1) titanium mesh, (2) titanium reinforced collagen, or (3) rhBMP-2 loaded titanium reinforced collagen. Animals were euthanized 8 and 16 weeks after surgery, and nondecalcified specimens were prepared and histomorphologically investigated to determine the degree of osteogenesis. Data were analyzed with Friedman test. With respect to the degree of osteogenesis at earlier stage (8 weeks after surgery), there was significantly higher new bone ratio in rhBMP-2 loaded membrane group (p > 0.05). However, with respect to the long-term results (16 weeks after surgery), there were no significant differences among the three membranes (p > 0.05). Based on histomorphometric analysis, there were no significant differences in horizontal bone gaining ratio (p > 0.05).

Use of Pig as a Model for Mesenchymal Stem Cell Therapies for Bone Regeneration

Bone is a plastic tissue with a large healing capability. However, extensive bone loss due to disease or trauma requires extreme therapy such as bone grafting or tissue-engineering applications. Presently, bone grafting is the gold standard for bone repair, but presents serious limitations including donor site morbidity, rejection, and limited tissue regeneration. The use of stem cells appears to be a means to overcome such limitations. Bone marrow mesenchymal stem cells (BMSC) have been the choice thus far for stem cell therapy for bone regeneration. However, adipose-derived stem cells (ASC) have similar immunophenotype, morphology, multilineage potential, and transcriptome compared to BMSC, and both types have demonstrated extensive osteogenic capacity both in vitro and in vivo in several species. The use of scaffolds in combination with stem cells and growth factors provides a valuable tool for guided bone regeneration, especially for complex anatomic defects. Before translation to human medicine, regenerative strategies must be developed in animal models to improve effectiveness and efficiency. The pig presents as a useful model due to similar macro- and microanatomy and favorable logistics of use. This review examines data that provides strong support for the clinical translation of the pig model for bone regeneration.

Bone morphogenetic protein-2 sustained delivery by hydrogels with microspheres repairs rabbit mandibular defects

Mandible defect is a difficult issue in dental surgery owing to limited therapeutic options. Recombinant human bone morphogenetic protein-2 (rhBMP2) is osteoinductive in bone regeneration. This article prepared chitosan/collagen hydrogels with rhBMP2-incorporated gelatin microsphere (GMs) for a sustained release of rhBMP2 to induce bone regeneration in rabbits. In experiments, mandibular defects of 8 mm in diameter and 3 mm in depth were surgically prepared on the right cheek of 27 rabbits. Either chitosan/collagen hydrogels alone, rhBMP2-incorporated hydrogels, or hydrogels with rhBMP2-incorporated GMs were implanted to the defect sites. The animals were euthanized at 2, 6, 12 weeks following surgery. In results, scanning electronic microscope images revealled spherical GMs. The complex delivery systems, hydrogels with rhBMP2-incorporated GMs, exhibited ideal release profiles in vitro. The complex delivery systems resulted in apparent new bone formation within 12 weeks, as evidenced by computed tomography and histological observations. All these results demonstrated that the chitosan/collagen hydrogels with rhBMP2-incorporated GMs had a better capacity to heal mandible defects than other two hydrogel scaffolds. Chitosan/collagen hydrogels with rhBMP2-incorporated GMs might be potential carriers of rhBMP2 for accelerating the repair of mandibular defects.

Growth factor-eluting technologies for bone tissue engineering

Growth factors are essential orchestrators of the normal bone fracture healing response. For non-union defects, delivery of exogenous growth factors to the injured site significantly improves healing outcomes. However, current clinical methods for scaffold-based growth factor delivery are fairly rudimentary, and there is a need for greater spatial and temporal regulation to increase their in vivo efficacy. Various approaches used to provide spatiotemporal control of growth factor delivery from bone tissue engineering scaffolds include physical entrapment, chemical binding, surface modifications, biomineralization, micro- and nanoparticle encapsulation, and genetically engineered cells. Here, we provide a brief review of these technologies, describing the fundamental mechanisms used to regulate release kinetics. Examples of their use in pre-clinical studies are discussed, and their capacities to provide tunable, growth factor delivery are compared. These advanced scaffold systems have the potential to provide safer, more effective therapies for bone regeneration than the systems currently employed in the clinic.

Multifunctional coatings to simultaneously promote osseointegration and prevent infection of orthopaedic implants

The two leading causes of failure for joint arthroplasty prostheses are aseptic loosening and periprosthetic joint infection. With the number of primary and revision joint replacement surgeries on the rise, strategies to mitigate these failure modes have become increasingly important. Much of the recent work in this field has focused on the design of coatings either to prevent infection while ignoring bone mineralization or vice versa, to promote osseointegration while ignoring microbial susceptibility. However, both coating functions are required to achieve long-term success of the implant; therefore, these two modalities must be evaluated in parallel during the development of new orthopaedic coating strategies. In this review, we discuss recent progress and future directions for the design of multifunctional orthopaedic coatings that can inhibit microbial cells while still promoting osseointegration.

Transforming growth factor Beta family: insight into the role of growth factors in regulation of fracture healing biology and potential clinical applications

The transforming growth factor beta (TGF-β) family forms a group of three isoforms, TGF-β1, TGF-β2, and TGF-β3, with their structure formed by interrelated dimeric polypeptide chains. Pleiotropic and redundant functions of the TGF-β family concern control of numerous aspects and effects of cell functions, including proliferation, differentiation, and migration, in all tissues of the human body. Amongst many cytokines and growth factors, the TGF-β family is considered a group playing one of numerous key roles in control of physiological phenomena concerning maintenance of metabolic homeostasis in the bone tissue. By breaking the continuity of bone tissue, a spread-over-time and complex bone healing process is initiated, considered a recapitulation of embryonic intracartilaginous ossification. This process is a cascade of local and systemic phenomena spread over time, involving whole cell lineages and various cytokines and growth factors. Numerous in vivo and in vitro studies in various models analysing cytokines and growth factors' involvement have shown that TGF-β has a leading role in the fracture healing process. This paper sums up current knowledge on the basis of available literature concerning the role of the TGF-β family in the fracture healing process.

Hydrogels for tissue engineering and regenerative medicine

Injectable hydrogels have become an incredibly prolific area of research in the field of tissue engineering and regenerative medicine, because of their high water content, mechanical similarity to natural tissues, and ease of surgical implantation, hydrogels are at the forefront of biomedical scaffold and drug carrier design.

Effect of different sintering methods on bioactivity and release of proteins from PLGA microspheres

Macromolecule release from poly(d,l-lactide-co-glycolide) (PLGA) microspheres has been well-characterized, and is a popular approach for delivering bioactive signals from tissue-engineered scaffolds. However, the effect of some processing solvents, sterilization, and mineral incorporation (when used in concert) on long-term release and bioactivity has seldom been addressed. Understanding these effects is of significant importance for microsphere-based scaffolds, given that these scaffolds are becoming increasingly more popular, yet growth factor activity following sintering and/or sterilization is heretofore unknown. The current study evaluated the 6-week release of transforming growth factor (TGF)-β3 and bone morphogenetic protein (BMP)-2 from PLGA and PLGA/hydroxyapatite (HAp) microspheres following exposure to ethanol (EtOH), dense phase carbon dioxide (CO2), or ethylene oxide (EtO). EtO was chosen based on its common use in scaffold sterilization, whereas EtOH and CO2 were chosen given their importance in sintering microspheres together to create scaffolds. Release supernatants were then used in an accelerated cell stimulation study with human bone marrow stromal cells (hBMSCs) with monitoring of gene expression for major chondrogenic and osteogenic markers. Results indicated that in microspheres without HAp, EtOH exposure led to the greatest amount of delivery, while those treated with CO2 delivered the least growth factor. In contrast, formulations with HAp released almost half as much protein, regardless of EtOH or CO2 exposure. Notably, EtO exposure was not found to significantly affect the amount of protein released. Cell stimulation studies demonstrated that eluted protein samples performed similarly to positive controls in PLGA-only formulations, and ambiguously in PLGA/HAp composites. In conclusion, the use of EtOH, subcritical CO2, and EtO in microsphere-based scaffolds may have only slight adverse effects, and possibly even desirable effects in some cases, on protein availability and bioactivity.

The combination of mesenchymal stem cells and a bone scaffold in the treatment of vertebral body defects

PURPOSE

Vertebral body defects represent one of the most common orthopedic challenges. In order to advance the transfer of stem cell therapies into orthopedic clinical practice, we performed this study to evaluate the safety and efficacy of a composite bioartificial graft based on a hydroxyapatite bone scaffold (CEM-OSTETIC(®)) combined with human mesenchymal stem cells (MSCs) in a rat model of vertebral body defects.

METHODS

Under general isoflurane anesthesia, a defect in the body of the L2 vertebra was prepared and left to heal spontaneously (group 1), implanted with scaffold material alone (group 2), or implanted with a scaffold together with 0.5 million MSCs (group 3) or 5 million MSCs (group 4). The rats were killed 8 weeks after surgery. Histological and histomorphometrical evaluation of the implant as well as micro-CT imaging of the vertebrae were performed.

RESULTS

We observed a significant effect on the formation of new bone tissue in the defect in group 4 when compared to the other groups and a reduced inflammatory reaction in both groups receiving a scaffold and MSCs. We did not detect any substantial pathological changes or tumor formation after graft implantation.

CONCLUSIONS

MSCs in combination with a hydroxyapatite scaffold improved the repair of a model bone defect and might represent a safe and effective alternative in the treatment of vertebral bone defects.

Transforming growth factor Beta-releasing scaffolds for cartilage tissue engineering

The maintenance of a critical threshold concentration of transforming growth factor beta (TGF-β) for a given period of time is crucial for the onset and maintenance of chondrogenesis. Thus, the development of scaffolds that provide temporal and/or spatial control of TGF-β bioavailability has appeal as a mechanism to induce the chondrogenesis of stem cells in vitro and in vivo for articular cartilage repair. In the past decade, many types of scaffolds have been designed to advance this goal: hydrogels based on polysaccharides, hyaluronic acid, and alginate; protein-based hydrogels such as fibrin, gelatin, and collagens; biopolymeric gels and synthetic polymers; and solid and hybrid composite (hydrogel/solid) scaffolds. In this study, we review the progress in developing strategies to deliver TGF-β from scaffolds with the aim of enhancing chondrogenesis. In the future, such scaffolds could prove critical for tissue engineering cartilage, both in vitro and in vivo.

Composition and characterization of in situ usable light cured dental drug delivery hydrogel system

Biodegradable polymers are compatible, permeable and nontoxic, thus they can provide a useful tool for drug delivery or tissue engineering. These polymers can form hydrogels, which are suitable vehicles for different types of materials e.g. drugs, bioactive molecules or cells. In the case of dentistry, photopolymerization is an obvious method to obtain in situ useable devices which can provide a more efficient way of tailoring drug release. A hydrogel system was developed based on poly-gamma-glutamic acid that was modified with methacryloyl groups to achieve this purpose. The resulting new reactive structure was proved by NMR spectroscopy. The swelling ratio of this type of hydrogel has been found remarkable, over 300 % after 24 h, and it can release 5 ng/mm(2) metronidazole. The prepared hydrogels were nontoxic as viability, cytotoxicity tests and cell morphology investigations proved it. These results render this model system an excellent candidate for use as an in situ curing local drug delivery device. The new photoactive system can be utilized in the treatment of periodontal diseases or raising the effectiveness of drugs used only in the minimal effective dose.

Preparation and characterization of elastin-like polypeptide scaffolds for local delivery of antibiotics and proteins

Tissue engineering applications could benefit from simultaneous release of growth factors, signaling molecules, and antibiotics to obtain optimal healing of tissues. Elastin-like polypeptides (ELPs) are genetically engineered polymers that possess good biocompatibility, are biodegradable, and exhibit mechanical properties similar to natural elastin. In addition, ELPs exhibit a characteristic inverse phase transition temperature (T(t)). This T(t) behavior is widely exploited in hyperthermia mediated drug delivery. The objectives of this research were to prepare ELP hydrogel scaffolds using a novel ultrasonication method and to investigate the release of a model protein (bovine serum albumin, BSA) and a commonly used antibiotic in periodontal therapy (doxycycline) from the scaffolds at two different temperatures (25 °C <T(t) vs. 37 °C >T(t)). Both BSA and doxycycline showed a gradual time dependent release and showed a trend of higher release fractions with higher loading doses. Based on the comparison between the release profiles at the two selected temperatures, the release was higher at 37 °C compared to that at 25 °C for both the loading concentrations of doxycycline (0.05 and 0.1 % v/v) and only one of the loading concentrations of BSA (0.5 % v/v) studied, while the release was higher at 25 °C compared to that at 37 °C only for the other loading concentration of BSA (1 % v/v) studied. These results suggested that the drug molecular weight and loading concentration were significant factors that affected the release kinetics. The experiments in this study demonstrated that the ELP hydrogel scaffolds can successfully release proteins and antibiotics critical to tissue engineering.

Delivery of growth factors for tissue regeneration and wound healing

Growth factors are soluble secreted proteins capable of affecting a variety of cellular processes important for tissue regeneration. Consequently, the self-healing capacity of patients can be augmented by artificially enhancing one or more processes important for healing through the application of growth factors. However, their application in clinics remains limited due to lack of robust delivery systems and biomaterial carriers. Interestingly, all clinically approved therapies involving growth factors utilize some sort of a biomaterial carrier for growth factor delivery. This suggests that biomaterial delivery systems are extremely important for successful usage of growth factors in regenerative medicine. This review outlines the role of growth factors in tissue regeneration, and their application in both pre-clinical animal models of regeneration and clinical trials is discussed. Additionally, current status of biomaterial substrates and sophisticated delivery systems such as nanoparticles for delivery of exogenous growth factors and peptides in humans are reviewed. Finally, issues and possible future research directions for growth factor therapy in regenerative medicine are discussed.

Administration of growth factors for bone regeneration

Growth factors (GFs) such as BMPs, FGFs, VEGFs and IGFs have significant impacts on osteoblast behavior, and thus have been widely utilized for bone tissue regeneration. Recently, securing biological stability for a sustainable and controllable release to the target tissue has been a challenge to practical applications. This challenge has been addressed to some degree with the development of appropriate carrier materials and delivery systems. This review highlights the importance and roles of those GFs, as well as their proper administration for targeting bone regeneration. Additionally, the in vitro and in vivo performance of those GFs with or without the use of carrier systems in the repair and regeneration of bone tissue is systematically addressed. Moreover, some recent advances in the utility of the GFs, such as using fusion technology, are also reviewed.

Periradicular Tissue Responses to Biologically Active Molecules or MTA When Applied in Furcal Perforation of Dogs' Teeth

The aim of this study was the comparative evaluation of inflammatory reactions and tissue responses to four growth factors, or mineral trioxide aggregate (MTA), or a zinc-oxide-eugenol-based cement (IRM) as controls, when used for the repair of furcal perforations in dogs' teeth. Results showed significantly higher inflammatory cell response in the transforming growth factorβ1 (TGFβ1) and zinc-oxide-eugenol-based cement (IRM) groups and higher rates of epithelial proliferation in the TGFβ1, basic fibroblast growth factor (bFGF), and insulin growth factor-I (IGF-I) groups compared to the MTA. Significantly higher rates of bone formation were found in the control groups compared to the osteogenic protein-1 (OP-1). Significantly higher rates of cementum formation were observed in the IGF-I and bFGF groups compared to the IRM. None of the biologically active molecules can be suggested for repairing furcal perforations, despite the fact that growth factors exerted a clear stimulatory effect on cementum formation and inhibited collagen capsule formation. MTA exhibited better results than the growth factors.

Natural and Genetically Engineered Proteins for Tissue Engineering

To overcome the limitations of traditionally used autografts, allografts and, to a lesser extent, synthetic materials, there is the need to develop a new generation of scaffolds with adequate mechanical and structural support, control of cell attachment, migration, proliferation and differentiation and with bio-resorbable features. This suite of properties would allow the body to heal itself at the same rate as implant degradation. Genetic engineering offers a route to this level of control of biomaterial systems. The possibility of expressing biological components in nature and to modify or bioengineer them further, offers a path towards multifunctional biomaterial systems. This includes opportunities to generate new protein sequences, new self-assembling peptides or fusions of different bioactive domains or protein motifs. New protein sequences with tunable properties can be generated that can be used as new biomaterials. In this review we address some of the most frequently used proteins for tissue engineering and biomedical applications and describe the techniques most commonly used to functionalize protein-based biomaterials by combining them with bioactive molecules to enhance biological performance. We also highlight the use of genetic engineering, for protein heterologous expression and the synthesis of new protein-based biopolymers, focusing the advantages of these functionalized biopolymers when compared with their counterparts extracted directly from nature and modified by techniques such as physical adsorption or chemical modification.

Jaw cysts - filling or no filling after enucleation? A review

INTRODUCTION

Jaw cysts are common lesions in the oral and maxillofacial region. Enucleation of the lesions and primary closure of the defects, the so-called "cystectomy", has evolved as the treatment of choice. In order to reduce infections and to accelerate bone regeneration, different types of bone grafts are increasingly investigated for defect filling.

MATERIAL AND METHODS

The present review reflects the most recent studies using autogenous, allogenic, xenogenic and alloplastic bone grafts and compares the results to current investigations about conservative cyst enucleation without using any filling materials. Relevant studies with significant patient sample sizes were electronically searched in PubMed and Medline.

RESULTS

Simple cyst enucleation and blood clot healing show low complication rates and sufficient bone regeneration even in large defects. Prospective randomized trials comparing the additional use of filling materials to the "cystectomy" are rare. Currently available data do not indicate the superiority of additional bone grafts.

CONCLUSION

Enucleation of jaw cysts and primary closure without bone substitutes remains "state of the art" in most cases.

Osteochondral interface regeneration of rabbit mandibular condyle with bioactive signal gradients

PURPOSE

Tissue engineering solutions focused on the temporomandibular joint (TMJ) have expanded in number and variety during the past decade to address the treatment of TMJ disorders. The existing data on approaches for healing small defects in the TMJ condylar cartilage and subchondral bone, however, are sparse. The purpose of the present study was thus to evaluate the performance of a novel gradient-based scaffolding approach to regenerate osteochondral defects in the rabbit mandibular condyle.

MATERIALS AND METHODS

Miniature bioactive plugs for regeneration of small mandibular condylar defects in New Zealand white rabbits were fabricated. The plugs were constructed from poly(D,L-lactic-co-glycolic acid) microspheres with a gradient transition between cartilage-promoting and bone-promoting growth factors.

RESULTS

At 6 weeks of healing, the results suggested that the implants provided support for the neosynthesized tissue as evidenced by the histologic and 9.4 T magnetic resonance imaging findings.

CONCLUSION

The inclusion of bioactive factors in a gradient-based scaffolding design is a promising new treatment strategy for focal defect repair in the TMJ.

Effect of rhTGF-β1 combined with bone grafts on human periodontal cell differentiation

Various techniques and materials have been proposed for the treatment of periodontal defects. In periodontal regeneration, periodontal ligament (PDL) cell differentiation as well as certain growth factors and their delivery system applied are critical. The purpose of this study was to evaluate the in vitro effect of recombinant human transforming growth factor-beta 1 (rhTGF-β1) combined with two different bone grafts on human PDL (hPDL) cell differentiation. The hPDL cells were treated with TGF-β1 alone or in combination with a calcified freeze-dried bone allograft (FDBA) and a porous biphasic calcium phosphate (BC) bone graft. Cell differentiation effect was estimated by measuring alkaline phosphatase (ALPase) activity and osteocalcin secretion. Results demonstrated that rhTGF-β1 alone or in combination with FDBA and BC provoked a significant (p<0.05) increase in ALPase activity as compared with controls. The findings of this study confirmed the beneficial role of rhTGF-β1 combined with FDBA and BC as carriers in periodontal regeneration.

A tissue-like construct of human bone marrow MSCs composite scaffold support in vivo ectopic bone formation

Biocompatible and osteoconductive cell-scaffold constructs comprise the first and most important step towards successful in vivo bone repair. This study reports on a new cell-scaffold construct composed of gelatin-based hydrogel and ceramic (CaCO(3)/beta-TCP) particles loaded with human MSCs producing a tissue-like construct applied as a transplant for in vivo bone formation. Bone marrow-derived human MSCs were cultured in osteogenic induction medium. 5 x 10(5) (P(2)) cells were loaded on a mixture of hydrogel microspheres and ceramic particles, cultured in a rotating dynamic culture for up to 3 weeks. Both hydrogel microspheres and ceramic particles coalesced together to form a tissue-like construct, shown by histology to contain elongated spindle-like cells forming the new tissue between the individual particles. Cell proliferation and cell viability were confirmed by Alamar blue assay and by staining with CFDA, respectively. FACS analysis conducted before loading the cells, and after formation of the construct, revealed that the profile of cell surface markers remained unchanged throughout the dynamic culture. The osteogenic potential of the cells composing the tissue-like construct was further validated by subcutaneous transplants in athymic nude mice. After 8 weeks a substantial amount of new bone formation was observed in the cell-construct transplants, whereas no bone formation was observed in transplants containing no cells. This new cell construct provides a system for in vivo bone transplants. It can be tailored for a specific size and shape as needed for various transplant sites and for all aspects of regenerative medicine and biomaterial science.

Micropatterning of Poly (Ethylene Glycol)-Diacrylate (PEG-DA) Hydrogel by Soft-Photolithography for Analysis of Cell-Biomaterial Interactions

Poly (ethylene glycol) hydrogel (PEG) micropatterns fabricated by photolithography and various other microfabrication techniques have been used as a platform to analyze cell-biomaterial interactions in cell culture studies. Numerous innovative techniques have been described about photolithography and the use of Poly (dimethyl siloxane) stamp (PDMS) based pressure moulding technique for the microfabrication of PEG hydrogel micropatterns. We herein this literature describe a simple and a versatile method for fabricating Poly (ethylene glycol) hydrogel-diacrylate (PEG-DA) hydrogel micropatterns using the ‘Soft-photolithography’ technique which is a combination of pressure moulding using a PDMS stamp and photolithography. Using this simple technique, PEG-DA hydrogel micropatterns were fabricated on a silicon substrate of varying dimensions from 40μm to 10μm within the same substrate. Such a three-dimensional microenvironment with varying sizes can serve as an excellent platform to study cell behaviour in culture. These PEG-DA hydrogel micropatterns can further be functionalized by adding a variety of biomolecular cues within the PEG-DA hydrogel matrix or these biomolecules can be patterned on the PEG-DA micropatterns after photopolymerization using micro-contact printing for analysis of cell-biomaterial interactions and tissue engineering purposes.

A preliminary report on the effect of dimeric rhGDF-5 and its monomeric form rhGDF-5C465A on bone healing of rat cranial defects

INTRODUCTION

The purpose of the study was to compare the efficacy on rat skull defects of two bone growth factors derived from the GDF-5 family.

MATERIAL AND METHODS

The study was conducted on 17 adult Wistar rats. On each animal, two symmetrical 6-mm wide, full-thickness, skull defects were carried out in the parietal regions. In 15 out of 17 animals, both experimental defects were filled by the implants. In the group I (n=2), both defects were left empty for control. The 15 other rats were divided into 3 groups: In group II (n=5), a collagen sponge was implanted. In group III (n=5), a collagen sponge impregnated with rhGDF-5 (the genuine dimeric form) was implanted. In group IV (n=5), a collagen sponge impregnated with rhGDF-5C465A (a monomeric form of GDF-5) was implanted. All animals were sacrificed at 8 weeks. The harvested specimens were processed for contact radiography and standard histological examination. The quantitative results were assessed with a semi-quantitative histological scoring system.

RESULTS

One animal in the group II was excluded because it died of unknown reasons. In group I, no bone healing was observed in the defects. In group II, no bone healing was observed in 4 out of 10 defects, and partial bone healing was observed in 5 out of 10 defects. In group III, partial bone healing was also observed in 3 out of 8 defects and complete bone healing in 4 out of 8 defects. In group IV, partial bone healing was observed in 8 out of 10 defects and complete bone healing in 2 out of 10 defects.

CONCLUSION

Bone healing was improved in all treated groups. Further studies are necessary to determine the optimal formulation of these composite implants.

Degenerative Disorders of the Temporomandibular Joint: Etiology, Diagnosis, and Treatment

Temporomandibular joint (TMJ) disorders have complex and sometimes controversial etiologies. Also, under similar circumstances, one person’s TMJ may appear to deteriorate, while another’s does not. However, once degenerative changes start in the TMJ, this pathology can be crippling, leading to a variety of morphological and functional deformities. Primarily, TMJ disorders have a non-inflammatory origin. The pathological process is characterized by deterioration and abrasion of articular cartilage and local thickening. These changes are accompanied by the superimposition of secondary inflammatory changes. Therefore, appreciating the pathophysiology of the TMJ degenerative disorders is important to an understanding of the etiology, diagnosis, and treatment of internal derangement and osteoarthrosis of the TMJ. The degenerative changes in the TMJ are believed to result from dysfunctional remodeling, due to a decreased host-adaptive capacity of the articulating surfaces and/or functional overloading of the joint that exceeds the normal adaptive capacity. This paper reviews etiologies that involve biomechanical and biochemical factors associated with functional overloading of the joint and the clinical, radiographic, and biochemical findings important in the diagnosis of TMJ-osteoarthrosis. In addition, non-invasive and invasive modalities utilized in TMJ-osteoarthrosis management, and the possibility of tissue engineering, are discussed.

Lubrication of the temporomandibular joint

Although tissue engineering of the temporomandibular joint (TMJ) structures is in its infancy, tissue engineering provides the revolutionary possibility for treatment of temporomandibular disorders (TMDs). Recently, several reviews have provided a summary of knowledge of TMJ structure and function at the biochemical, cellular, or mechanical level for tissue engineering of mandibular cartilage, bone and the TMJ disc. As the TMJ enables large relative movements, joint lubrication can be considered of great importance for an understanding of the dynamics of the TMJ. The tribological characteristics of the TMJ are essential for reconstruction and tissue engineering of the joint. The purpose of this review is to provide a summary of advances relevant to the tribological characteristics of the TMJ and to serve as a reference for future research in this field. This review consists of four parts. Part 1 is a brief review of the anatomy and function of the TMJ articular components. In Part 2, the biomechanical and biochemical factors associated with joint lubrication are described: the articular surface topology with microscopic surface roughness and the biomechanical loading during jaw movements. Part 3 includes lubrication theories and possible mechanisms for breakdown of joint lubrication. Finally, in Part 4, the requirement and possibility of tissue engineering for treatment of TMDs with degenerative changes as a future treatment regimen will be discussed in a tribological context.

Mesenchymal stem cells in bone and cartilage repair: current status

The progression of rheumatoid pathologies, degenerative diseases, traumatologies, and their cortege of increasing medical, social and economical needs, has mandated the development of tissue repair and engineering technologies in orthopedic medicine. Mesenchymal stem cells (MSCs) are multipotent cells that can be extracted from large and relatively easily accessible compartments of the body, especially the bone marrow, and such cells are able to differentiate into adipogenic, chondrogenic and osteogenic precursors. The concept of using MSCs to repair tissues has progressively evolved, and the goal of cell-mediated therapy is to prolong the natural physiological abilities of healing, or substitute them, when these are lacking, failing or progressing too slowly. In recent years, the first clinical trials on the utility of MSCs, with or without scaffolds and/or growth factors, have been initiated. In this review, the authors focus on findings from preclinical research, clinical trials and case reports involving bone and cartilage repairs. New perspectives are considered regarding uses of cell types, cell delivery approaches and growth factors. They also consider the stringent conditions, constraints and considerations necessary to take cell-mediated therapy from bench to bedside.

Matrices and scaffolds for delivery of bioactive molecules in bone and cartilage tissue engineering

Regeneration of bone and cartilage defects can be accelerated by localized delivery of appropriate growth factors incorporated within biodegradable carriers. The carrier essentially allows the impregnated growth factor to release at a desirable rate and concentration, and to linger at injury sites for a sufficient time to recruit progenitors and stimulate tissue healing processes. In addition, the carrier can be formulated to have particular structure to facilitate cellular infiltration and growth. In this review, we present a summary of growth factor delivery carrier systems for bone and cartilage tissue engineering. Firstly, we describe a list of growth factors implicated in repair and regeneration of bone and cartilage by addressing their biological effects at different stages of the healing process. General requirements for localized growth factor delivery carriers are then discussed. We also provide selective examples of material types (natural and synthetic polymers, inorganic materials, and their composites) and fabricated forms of the carrier (porous scaffolds, microparticles, and hydrogels), highlighting the dose-dependent efficacy, release kinetics, animal models, and restored tissue types. Extensive discussion on issues involving currently investigated carriers for bone and cartilage tissue engineering approaches may illustrate future paths toward the development of an ideal growth factor delivery system.

Growth factor signalling in prostatic growth: significance in tumour development and therapeutic targeting

The intricate balance maintained between cell growth and proliferation factors and apoptosis-inducing factors is fundamental to the regulation of prostate growth. Disruptions in this homeostasis often trigger the loss of apoptosis and the over-expression of factors promoting cell survival and proliferation, inevitably leading to tumorigenesis and cancer. Deregulation of prostate growth during prostate cancer development and progression is characterized by apoptotic evasion, uncontrolled proliferation, and increased invasive potential. Thus, in advanced stages of disease progression, surviving prostate tumour cells acquire the ability to migrate and invade heterotopic tissues, with the bone and lymph nodes being the most common sites for human prostate cancer metastasis. The challenges in the implementation of effective therapeutic strategies for the treatment of advanced metastatic prostate cancer reflect the multidimensional nature and functional significance of antiapoptotic pathways in the emergence of therapeutic resistance of prostate tumours. In this chapter, we discuss the current understanding of the molecular mechanisms governing growth factor signalling pathways with often overlapping functions that contribute to loss of apoptosis control and activation of cell proliferation towards aggressive prostate tumorigenic growth and metastatic behaviour. While a full understanding of the prosurvival characteristics of these growth factor pathways is still evolving, the impact that growth factors such a epidermal growth factor and transforming growth factor-beta can be recognized by the vigorous attempts at therapeutic targeting of their key signalling steps.